In this sample there are 1.51 x 10^24 molecules of sucrose present in it.
To determine the number of molecules of sucrose present in the sample, we need to first calculate the number of moles of carbon present in the sample.
The molecular formula of sucrose (C12H22O11) contains 12 carbon atoms.
So, 3.6 x 10^24 atoms of carbon is equal to 3.6 x 1024/12 = 3 x 1023 moles of carbon.
Now, we can use the Avogadro's number (6.022 x 10^23 molecules per mole) to convert the number of moles of carbon to the number of molecules of sucrose:
Number of molecules of sucrose = 3 x 10^23 x (1 molecule of sucrose / 12 molecules of carbon) x (6.022 x 10^23 molecules per mole)
Number of molecules of sucrose = 1.51 x 10^24 molecules
Therefore, there are 1.51 x 10^24 molecules of sucrose present in the sample.
Know more about Avogadro's Number here:
https://brainly.com/question/23944317
#SPJ11
PLEASE HELP MEEEEE PLEASEEEE
Given the following reaction: CuO (s) + H2 (g) ® Cu (s) + H2O (g) If 357. L of hydrogen gas are used to reduce copper (II) oxide at STP, what mass of copper is to be expected?
The mass of copper produced from the reaction of 357 L of H₂ gas with CuO at STP is 949 g.
Using the ideal gas law equation PV = nRT, Pressure is P, temperature is T, gas constant is R, volume is V and moles are n. From the balanced chemical equation, we know that 1 mole of Cu reacts with 1 mole of H₂.
1. The mass of Cu produced is equal to the number of moles of Cu times its molar mass since copper has a molar mass of 63.55 g/mol. Therefore, the steps to solve the problem are,
Convert the volume to liters,
357 L
Calculate the number of moles of H₂ using the ideal gas law:
PV = nRT
(1 atm) (357 L) = n (0.0821 L·atm/mol·K) (273 K)
n = 14.94 mol
2. Calculate the number of moles of Cu based on the balanced chemical equation,
1 mole Cu : 1 mole H₂
14.94 mol H₂ : x mole Cu
x = 14.94 mol
3. Calculate the mass of Cu produced:
m = n × M, mass in grams is m, the number of moles is n, the molar mass of Cu is M.
M(Cu) = 63.55 g/mol
m = 14.94 mol × 63.55 g/mol
m = 949 g
Therefore, the mass of copper produced is 949 g.
To know more about ideal gas equation, visit,
https://brainly.com/question/27870704
#SPJ4
4. An alkaline earth hydroxide, M(OH)2, was taken to lab for analysis. The unknown powder was poured into a flask and swirled in room temperature DI water until a saturated solution formed. This solution was then slowly filtered to remove the undissolved solid hydroxide. 28. 5 mL of this saturated solution was titrated with 0. 173 M HCl (aq). Endpoint required 25. 10 mL of the HCl (aq) solution. Calculate the Ksp for this alkaline earth hydroxide
The Ksp of a substance is the equilibrium constant for the reaction between the dissolved ions and the undissolved solid. In this case, the equation is M₂+(aq) + 2OH-(aq) ↔ M(OH)₂(s).
Knowing the volume of HCl required for the titration (25.10 mL) and the molarity of the HCl (0.173 M), the concentration of M₂+ and OH- ions in the saturated solution can be calculated. The Ksp can then be calculated using the concentration of M₂+ and OH- ions in the solution.
The Ksp can be expressed as Ksp = [M₂+][OH]⁻². To calculate the Ksp, the molarity of the HCl solution is multiplied by the volume used in the titration (25.10 mL) to get the moles of HCl used (4.35 x 10⁻³mol). This number is then divided by the volume of the saturated solution (28.5 mL) to get the concentration of M₂+ (1.53 x 10-2 M) and OH- (3.06 x 10⁻² M).
Finally, the Ksp can be calculated using the concentrations of M₂+ and OH- ions: Ksp = [1.53 x 10⁻²][3.06 x 10⁻²]2 = 4.94 x 10⁻⁵. Thus, the Ksp for this alkaline earth hydroxide is 4.94 x 10-5.
Know more about Equilibrium constant here
https://brainly.com/question/10038290#
#SPJ11
What mass of KNO3 is needed to create a saturated solution at 60 °C in 240. 0 mL of distilled
water?
Approximately 148.8 g of KNO₃ is needed to create a saturated solution at 60°C in 240.0 mL of distilled water.
The mass of KNO₃ needed to create a saturated solution at 60°C in 240.0 mL of distilled water depends on the solubility of KNO₃ at that temperature.
The solubility of KNO₃ in water increases with temperature. At 60°C, the solubility of KNO₃ is approximately 62 g per 100 mL of water.
Thus, the quantity of KNO₃ required to form a saturated solution in 240.0 mL of water can be determined using the following procedure.:
Mass of KNO₃ = (62 g/100 mL) x (240.0 mL) = 148.8 g
To know more about price solubility, refer here:
https://brainly.com/question/17647006#
#SPJ11
In a boiling pot of water are a metal spoon and a wooden spoon of equal masses/size. Which spoon would likely be more painful (higher in temperature) to grab? Assume that both spoons have been in the same pot of boiling water for the same amount of time. Explain this phenomena using the following terms: Heat, Mass, Temperature, Specific Heat Capacity, Heat Flow. Consider all possible factors in your explanation
The metal spoon is hotter than the wooden spoon due to its higher mass,
Heat is the energy transferred from one body to another due to a temperature difference. The amount of heat transferred is proportional to the mass of the object and its specific heat capacity. Specific heat capacity is the amount of heat required to raise the temperature of one unit mass of the substance by one degree Celsius.
In this scenario, the two spoons are of equal size, but the metal spoon has a higher mass and specific heat capacity compared to the wooden spoon. When both spoons are placed in the boiling water, heat flows from the water to the spoons until they reach the same temperature as the water.
However, due to the higher mass and specific heat capacity of the metal spoon, it requires more heat energy to raise its temperature compared to the wooden spoon. As a result, the metal spoon takes a longer time to reach the same temperature as the wooden spoon.
Additionally, metals are better conductors of heat compared to wood. Therefore, the metal spoon conducts the heat more efficiently from the boiling water to the handle, making it hotter than the wooden spoon.
Overall, the metal spoon is hotter than the wooden spoon due to its higher mass, higher specific heat capacity, and better heat conduction properties. This is why it would be more painful to grab.
Part D
Press the yellow reset button at the bottom of the simulation screen. Under Constant Parameter, select Volume. Again,
pump the pump handle once to introduce 40 to 50 gas molecules. Record the pressure in the data table.
Use the heat control to heat the gas to each of the other temperatures in the data table, and record the new pressure.
Answer from Edmentum :)
The instruction is to use the PhET simulation to perform an experiment where the constant parameter is set to volume, and then to pump 40 to 50 gas molecules into the simulation.
The pressure of the gas is recorded in a data table. Next, the heat control is used to heat the gas to each of the other temperatures in the data table, and the corresponding new pressure values are recorded in the data table. This experiment demonstrates the relationship between pressure and temperature, which is known as the ideal gas law.
By holding the volume constant and changing the temperature, we can observe how the pressure of the gas changes. This experiment is useful in understanding real-world phenomena such as how temperature affects the pressure of gas inside a container, such as a tire or a balloon.
To know more about the Pressure, here
https://brainly.com/question/15813117
#SPJ4
How might the jetstream affect the winter in your town this winter explain your answer
The jetstream is a high-altitude, fast-moving air current that can impact weather patterns across large areas.
In the winter, changes in the jetstream can affect the amount and type of precipitation, as well as the temperature. For example, if the jetstream shifts southward, bringing colder air from the Arctic, your town may experience colder than average temperatures and more snowfall.
Alternatively, if the jetstream stays north, your town may experience milder temperatures and less precipitation. Overall, the jetstream can have a significant impact on the winter weather in your town, and it's important to keep an eye on its movements to prepare for any potential weather changes.
To know more about air current click on below link:
https://brainly.com/question/13653784#
#SPJ11
The first law the of thermodynamic also known as the "Law of Conservation of Mass" states that
A. heat changes occur during chemical and physical changes.
B. there are two types of energy, kinetic and potential
C. In any chemical or physical change, energy cannot be created or destroyed, only transformed in form.
D. energy is the capacity to do work or to supply heat
In any chemical or physical change, energy cannot be created or destroyed, only transformed in form.
option C.
What is the first law of thermodynamics?The first law of thermodynamics is known as the law of Conservation of Energy.
This law states that energy can neither be created nor destroyed but can be converted from one form to another.
So the first law of thermodynamics is not known as the "Law of Conservation of Mass", but rather as the "Law of Conservation of Energy".
The statement that best corresponds to the first law of thermodynamics is option C: "In any chemical or physical change, energy cannot be created or destroyed, only transformed in form."
Learn more about first law of thermodynamics here: https://brainly.com/question/26035962
#SPJ1
Chlorophyll is a green pigment in plants responsible for harnessing sunlight to help the plant produce sugars through the process of photosynthesis. If several tomato plants were to be grown under lamps producing only a single color of light, what would be the least effective choice for light color?
Group of answer choices
green
orange
red
blue
The least effective choice of color would be green color. Hence option a is correct.
The plants absorb all different wavelength lights of the visible light spectra but the only color that is not absorbed and reflected back is green color light.
The principal pigment in photosynthesis, chlorophyll, reflects green light and significantly absorbs red and blue light. Chloroplasts, which house the chlorophyll in plants, are where photosynthesis occurs.
The plant's green colour is a reflection of the green light. Violet and orange (chlorophyll a) and blue and yellow (chlorophyll b) are the colours that are most readily absorbed. Therefore, green colour light would be least effective for the production of sugar and fruit in this tomato plant.
To know about chlorophyll
https://brainly.com/question/29853003
#SPJ4
A soft lump of clay has water run on top of it. After a long while the water is turned off and allowed to dry. There is no clay left; instead there are small pebbles and other types of components left on the table. Which natural process is this modeling?
A. Erosion
B. Deposition
C. Chemical weathering
D. Physical weathering
The natural process being modeled here is "Chemical weathering". The correct answer is option c.
Chemical weathering is the process by which rocks and minerals are broken down through chemical reactions with water, air, and other substances.
In this case, the clay is being broken down by the water, which is dissolving some of the minerals in the clay and carrying them away. As the water evaporates, the minerals are left behind, forming small pebbles and other components.
This process may occur over a long period of time, depending on the type of clay and the amount of water present. Chemical weathering is an important part of the Earth's natural processes, as it helps to shape the landscape and produce new materials that can be used for building and other purposes.
The correct answer is option c.
To know more about Chemical weathering refer to-
https://brainly.com/question/29616084
#SPJ11
You are placed in charge of building a brand new city in america. your fellow city planners do not want to use coal or gas to power the city. would you choose to use fission nuclear reactors or fusion nuclear reactors? what is your reasoning?
will give brainliest
In building a brand new city in America without using coal or gas, I would choose to use fission nuclear reactors over fusion nuclear reactors.
The reason behind choosing fission nuclear reactors is that they are currently more developed and widely used in practice than fusion nuclear reactors.
Fission reactors have proven their efficiency and safety in generating power for decades.
Fusion nuclear reactors, while having the potential for greater energy output and fewer radioactive waste issues, are still in the experimental stage and not yet commercially viable.
As a city planner, it's crucial to prioritize reliable and established energy sources for the city's needs. Therefore, using fission nuclear reactors would be a more feasible and practical choice for powering a new city in America.
To know more about nuclear fission visit:
https://brainly.com/question/29541275
#SPJ11
How many grams of CaCO3 are produced when 98. 2 grams of CaO are reacted with an excess of Co2 according to the equation provided? CaO+CO2-->CaCO3
175.17 grams of CaCO₃ are produced when 98.2 grams of CaO are reacted with an excess of CO₂ according to the given equation.
To solve this problem, we need to use stoichiometry which deals with the quantitative relationships between reactants and products in chemical reactions.
The balanced chemical equation for the reaction is:
CaO + CO₂ → CaCO₃
This equation tells us that for every 1 mole of CaO and 1 mole of CO₂ that react, we get 1 mole of CaCO₃.
We are given the mass of CaO that is used in the reaction. To calculate the mass of CaCO₃ that is produced, we need to use stoichiometry and the molar mass of CaCO₃.
The molar mass of CaCO₃ is the sum of the atomic masses of one calcium atom (Ca), one carbon atom (C), and three oxygen atoms (O). Using the values from the periodic table, we can calculate the molar mass of CaCO₃ as:
molar mass of CaCO₃ = 1 × atomic mass of Ca + 1 × atomic mass of C + 3 × atomic mass of O
= 1 × 40.08 g/mol + 1 × 12.01 g/mol + 3 × 16.00 g/mol
= 100.09 g/mol
To calculate the number of moles of CaO that reacted, we can use the following equation:
n = m/M
where n is the number of moles of CaO, m is the mass of CaO, and M is the molar mass of CaO.
Using the given values, we get:
n = 98.2 g / 56.08 g/mol = 1.749 mol
This is the number of moles of CaO that reacted in the reaction.
Since the reaction is 1:1, meaning that one mole of CaO reacts with one mole of CO₂ to produce one mole of CaCO₃, we know that the number of moles of CaCO₃ produced is also 1.749 mol.
Finally, to calculate the mass of CaCO₃ produced, we can use the following equation:
m = n × M
where m is the mass of CaCO₃ produced, n is the number of moles of CaCO₃ produced, and M is the molar mass of CaCO₃.
Using the given values, we get:
m = 1.749 mol × 100.09 g/mol = 175.17 g
Learn more about CaCO₃ at https://brainly.com/question/30594488.
#SPJ11
Na2CO3 (aq) + CoCl2 (aq) →
Express your answer as a chemical equation including phases. Enter noreaction if no precipitate is formed
The chemical equation is Na₂CO₃(aq) + CoCl₂(aq) -> 2NaCl(aq) + CoCO₃ (s), which represents the reaction between sodium carbonate and cobalt chloride to form sodium chloride and cobalt carbonate precipitate.
The balanced chemical equation for the reaction between Na₂CO₃ (sodium carbonate) and CoCl₂ (cobalt chloride) is:
Na₂CO₃ (aq) + CoCl₂ (aq) → CoCO₃ (s) + 2NaCl (aq)
In this reaction, the sodium carbonate reacts with cobalt chloride to produce cobalt carbonate and sodium chloride. This is an example of a double displacement reaction, where the positive and negative ions of two compounds exchange places to form two new compounds.
In this case, the carbonate ion (CO₃²⁻) from sodium carbonate combines with the cobalt ion (Co⁺) from cobalt chloride to form cobalt carbonate (CoCO₃), which is a solid precipitate.
To know more about the double displacement reaction refer here :
https://brainly.com/question/29307794#
#SPJ11
What is the molar mass of H3PO4? (Molar mass of H = 1. 0079 g/mol; P = 30. 974 g/mol; O = 15. 999 g/mol) (3 points) a 72. 98 g/mol b 78. 22 g/mol c 88. 24 g/mol d 97. 99 g/mol
Answer: d. 97.99g/mol
Explanation:
We need to add the molar mass of each of the atoms from the formula:
H3PO4 has 3x H atoms, 1x P atom, and 4x O atoms
H 3x 1.0079= 3.0237g/mol
P 1x 30.974= 30.974g/mol
O 4x 15.999= 63.996g/mol
now add all of the totals for each type of atom
3.0237 + 30.974 + 63.996= 97.9937g/mol
our answer is d. 97.99g/mol
A sample of 4. 25 moles of Hydrogen at 20. 0 ⁰C occupies a volume of 25. 0 L. Under what pressure is this sample?
The pressure of the Hydrogen gas sample is approximately 29.4 atm.
To find the pressure of the 4.25 moles of Hydrogen gas at 20.0°C and occupying a volume of 25.0 L, we can use the ideal gas law formula: PV = nRT, where P is pressure, V is volume, n is the number of moles, R is the ideal gas constant (8.314 J/mol·K), and T is the temperature in Kelvin.
First, convert the temperature to Kelvin: 20.0°C + 273.15 = 293.15 K.
Now, rearrange the formula to solve for pressure: P = nRT/V
Substitute the values: P = (4.25 moles) × (8.314 J/mol·K) × (293.15 K) / (25.0 L)
Calculate the pressure: P ≈ 3921.2 J/L
Since 1 J/L = 0.00750062 atm, convert the pressure to atm: P ≈ 3921.2 J/L × 0.00750062 atm/J·L ≈ 29.4 atm
So, the pressure of the Hydrogen gas sample is approximately 29.4 atm.
To learn more about hydrogen, refer below:
https://brainly.com/question/28937951
#SPJ11
Which term names the result of two or more atoms combining chemically?.
The term that names the result of two or more atoms combining chemically is a molecule.
A molecule is formed when two or more atoms combine chemically by sharing electrons in a covalent bond.
This bonding occurs when atoms have unpaired electrons in their outermost shell, and they share these electrons to complete their valence shells. In a covalent bond, the electrons are shared between atoms, rather than being transferred, as in an ionic bond.
Molecules can be formed between atoms of the same element or different elements, depending on the chemical properties of the atoms.
For example, two oxygen atoms can combine to form an oxygen molecule (O2), while a hydrogen atom can combine with an oxygen atom to form a water molecule (H2O).
Molecules are the building blocks of all substances in the universe. They are responsible for the chemical and physical properties of substances, such as their melting and boiling points, solubility, and reactivity.
Understanding the formation and behavior of molecules is essential for understanding chemistry and the world around us.
To know more about molecule refer to-
https://brainly.com/question/19922822
#SPJ11
1. How many liters of water will be produced if you have 17. 43 grams of ammonia (NH3)? *
(8 Points)
4 NH3 + 502 --> 4 NO + 6H2O
Enter your math answer
17.43 grams of NH₃ will produce 34.39 liters of water.
The balanced chemical equation is 4 NH₃ + 5O₂ → 4NO + 6H₂O. From the equation, we can see that for every 4 moles of NH₃ reacted, 6 moles of water are produced.
Therefore, to determine the number of moles of water produced, we need to convert the mass of NH₃ given to moles. The molar mass of NH₃ is 17.03 g/mol, so:
17.43 g NH₃ × (1 mol NH₃/17.03 g NH₃) = 1.023 mol NH₃
Using stoichiometry, we can calculate the number of moles of water produced:
1.023 mol NH₃ × (6 mol H₂O/4 mol NH₃) = 1.5345 mol H₂O
Finally, we can convert the number of moles of water to liters using the fact that 1 mole of any gas at standard temperature and pressure (STP) occupies 22.4 L:
1.5345 mol H₂O × (22.4 L/mol) = 34.39 L
To know more about chemical equation, refer here:
https://brainly.com/question/19626681#
#SPJ11
How many moles of hydrogen gas are needed to react with 15.1g of chlorine gas
produce hydrogen chloride gas?
The number of moles of hydrogen gas needed is 0.213 moles, under the condition that their is a necessity of reacting 15.1g of chlorine gas to produce hydrogen chloride gas.
Here the balanced chemical equation for the reaction regarding hydrogen gas and chlorine gas in the process of producing hydrogen chloride gas is
H₂(g) + Cl₂(g) → 2HCl(g)
The given molar mass of chlorine gas is 70.9 g/mol.
Now to evaluate the number of moles of chlorine gas in 15.1 g of chlorine gas,
We need to divide the mass by the molar mass
Number of moles of chlorine gas = Mass of chlorine gas / Molar mass of chlorine gas
= 15.1 g / 70.9 g/mol
= 0.213 mol
Then, from the balanced chemical equation, we can interpret that 1 mole of hydrogen gas reacts with 1 mole of chlorine gas to produce 2 moles of hydrogen chloride gas.
Hence, to calculate the number of moles of hydrogen gas required to react with 15.1 g of chlorine gas,
1 mol H₂ / 1 mol Cl₂ = x mol H₂ / 0.213 mol Cl₂
Evaluating for x,
x = (1 mol H₂ / 1 mol Cl₂) × (0.213 mol Cl₂)
= 0.213 mol H₂
To learn more about molar mass
https://brainly.com/question/837939
#SPJ4
What is the mass in grams of strontium chloride that reacts with 300. 0g of sulfuric acid
To solve this problem, we first need to write and balance the chemical equation for the reaction between strontium chloride and sulfuric acid:
SrCl2 + H2SO4 → SrSO4 + 2HCl
According to the balanced chemical equation, one mole of strontium chloride reacts with one mole of sulfuric acid to produce one mole of strontium sulfate and two moles of hydrochloric acid.
Next, we need to calculate the number of moles of sulfuric acid we have:
moles of H2SO4 = mass of H2SO4 / molar mass of H2SO4
moles of H2SO4 = 300.0 g / 98.08 g/mol
moles of H2SO4 = 3.057 mol
Finally, we can use the stoichiometry of the balanced chemical equation to determine the number of moles of strontium chloride that will react with 3.057 moles of sulfuric acid:
moles of SrCl2 = moles of H2SO4
moles of SrCl2 = 3.057 mol
Now we can calculate the mass of strontium chloride using its molar mass:
mass of SrCl2 = moles of SrCl2 x molar mass of SrCl2
mass of SrCl2 = 3.057 mol x 158.53 g/mol
mass of SrCl2 = 485.1 g
Therefore, 485.1 grams of strontium chloride will react with 300.0 grams of sulfuric acid.
Explanation:
To solve this problem, we use stoichiometry, which is a method that relates the amount of reactants and products in a chemical reaction based on their balanced chemical equation. In this case, we first write and balance the chemical equation for the reaction between strontium chloride and sulfuric acid. Then, we calculate the number of moles of sulfuric acid given its mass and molar mass. Next, we use the stoichiometry of the balanced chemical equation to determine the number of ontium chloride that will react with the given amount of sulfuric acid. Finally, we calculate the mass of strontium chloride using its molar mass and the calculated number of moles. By following these steps, we can determine the mass of strontium chloride that will react with 300.0 grams of sulfuric acid.
Under what circumstances is an exothermic reaction non-spontaneous?.
An exothermic reaction is spontaneous if the overall Gibbs free energy change (ΔG) is negative, indicating that the reaction is energetically favorable and will proceed without an external energy input. However, an exothermic reaction can become non-spontaneous under certain circumstances.
One such circumstance is when the entropy change (ΔS) is negative. If ΔH is negative (exothermic) but ΔS is also negative (decrease in disorder), the value of ΔG could still be positive (non-spontaneous) or close to zero (at equilibrium) at temperatures where ΔH is not sufficiently large to overcome the negative ΔS.
This means that even though energy is released during the reaction, the decrease in disorder can make the reaction unfavorable.
Another circumstance is when the reactants are in a highly ordered or low-energy state, and the products are in a highly disordered or high-energy state. In such cases, the enthalpy change (ΔH) may be negative (exothermic), but the entropy change (ΔS) is also positive, and the resulting ΔG value may still be positive, making the reaction non-spontaneous.
To know more about exothermic reaction refer to-
https://brainly.com/question/10373907
#SPJ11
How do paleontologists determine the placement of a fossil for display? Explain how diagnostic structure is used for the accurate placement of a fossil
Paleontologists use a variety of methods to determine the placement of a fossil for display. One important factor is the diagnostic structure of the fossil, which refers to unique features that help to identify the species and its evolutionary relationships. For example, if a fossil has a particular shape or pattern on its shell, this could indicate a specific genus or species.
To accurately place a fossil for display, paleontologists will carefully examine its diagnostic structures and compare them to other specimens in their collection or in published research. They may also consult with experts in the field or use advanced imaging techniques to better understand the fossil's characteristics.
Once the paleontologists have identified the species and determined its placement, they can design a display that showcases the fossil in a way that is both educational and visually appealing. This may involve creating a custom mount or exhibit case, selecting appropriate lighting and text labels, and considering the context in which the fossil was found.
Overall, the accurate placement of a fossil for display is crucial for conveying its scientific significance to the public and helping people to better understand the history of life on Earth. By using diagnostic structure as a key tool in this process, paleontologists can ensure that the fossils are correctly identified and presented in a way that is both informative and engaging.
To know more about Paleontologists refer here
https://brainly.com/question/11805817#
#SPJ11
It's a beautiful sunny July day temperature is 22. 4°C and you are playing basketball. You are using a vessel that has a volume of 3. 1 L. Later that night, the temperature drops to 8. 5°C and you go out to play basketball again. What is the volume of the ball that evening in liters?
The volume of the vessel in the evening when the temperature drops to 8.5°C is approximately 2.64 L.
We can use the combined gas law to solve this problem, which relates the pressure, volume, and temperature of a gas. The formula is:
(P1 x V1)/T1 = (P2 x V2)/T2
where P is pressure, V is volume, and T is temperature.
Using the initial conditions, we have:
P1 = P2 (assuming atmospheric pressure remains constant)
V1 = 3.1 L
T1 = 22.4°C + 273.15
= 295.55 K
Solving for V2, we get:
V2 = (P1 x V1 x T2)/(P2 x T1)
= (1 x 3.1 x (8.5°C + 273.15))/(1 x 295.55)
= 2.64 L
As a result, when the temperature lowers to 8.5°C in the evening, the volume of the vessel is roughly 2.64 L.
To know more about the Temperature, here
https://brainly.com/question/30029642
#SPJ4
Help what’s the answer?
The mass of the zinc hydroxide that we need for the reaction is about 21.8 g.
What is the equation of reaction?The equation of a reaction is a chemical equation that represents the chemical change that occurs during a chemical reaction. It is typically written in the form:
Reactants → Products
where the reactants are the starting materials and the products are the substances that are formed as a result of the reaction.
The equation of the reaction is;
Zn(OH)2 + H2SO4 → ZnSO4 + 2H2O
Number of moles of H2SO4 = 21.1 g/98 g/mol
= 0.22 moles
If the reaction is 1:1,
Mass of the Zn(OH)2 required = 0.22 moles * 99 g/mol
= 21.8 g
Learn more about reaction:https://brainly.com/question/28984750
#SPJ1
4 points
A solution consists of 2. 50 moles of NaCl dissolved in
100. Grams of H20 at 25°C. Compared to the boiling
point and freezing point of 100. Grams of H20 at
standard pressure, the solution at standard pressure
has
A) a lower boiling point and a higher freezing point
B) a higher boiling point and a lower freezing point
C) a higher boiling point and a higher freezing point
D) a lower boiling point and a lower freezing point
A solution consists of 2.50 moles of NaCl dissolved in 100 grams of H₂0 at 25°C. Compared to the boiling point and freezing point of 100 grams of H₂0 at standard pressure, the solution at standard pressure has a lower boiling point and a higher freezing point. The correct option is A.
When a solute, such as NaCl, is dissolved in a solvent, such as water, the boiling point of the solution is raised and the freezing point is lowered. This phenomenon is known as boiling point elevation and freezing point depression.
The extent of the change in boiling point and freezing point depends on the concentration of the solute in the solution. In this case, the solution consists of 2.50 moles of NaCl dissolved in 100 grams of H₂O. This concentration of NaCl will cause the solution to have a lower boiling point and a higher freezing point compared to pure water.
The reason is that the NaCl molecules dissociate into ions when dissolved in water, which increases the number of particles in the solution and lowers the vapor pressure, making it more difficult for the solution to boil. Additionally, the presence of the solute disrupts the formation of crystal lattice structures in the solvent, causing a decrease in the freezing point. Hence, option A is correct.
To know more about solute, refer here:
https://brainly.com/question/13812915#
#SPJ11
4NH3+6NO --> 5N2 + 6H20
How many liters of NH3 at 32. 6 °C and 4. 25 kPa are needed to react
completely with 30. 0L of NO at STP?
According to the question 19.2 liters of NH3 at 32.6°C and 4.25 kPa is required to react completely with 30.0L of NO at STP.
What is STP?STP (Standard Temperature and Pressure) is an important concept in the physical sciences. It is the reference state for temperature and pressure in which most measurements are made. In chemistry, STP is used as a reference state for calculating the physical properties of various substances. It is also used in thermodynamics to calculate the physical state of a system. STP is defined as 0 °C (273.15 K) and a pressure of 1 atmosphere (101.325 kPa).
According to the balanced equation, for every 6 moles of NO, 5 moles of NH3 is required. Therefore, we need to calculate the number of moles of NO first.
1 mole of gas at STP occupies 22. 4 liters, so 30.0 liters of NO at STP is equal to 30.0/22.4 = 1.34 moles of NO.
Since we need 5 moles of NH3 for every 6 moles of NO, we need 5/6 x 1.34 = 1.12 moles of NH3.
At 32.6°C and 4.25 kPa, 1 mole of NH3 occupies 17.1 liters, so 1.12 moles of NH3 is equal to 1.12 x 17.1 = 19.2 liters of NH3.
Therefore, 19.2 liters of NH3 at 32.6°C and 4.25 kPa is required to react completely with 30.0L of NO at STP.
To learn more about STP
https://brainly.com/question/27100414
#SPJ4
a compound with a molecular weight of 229.61 g/mol was dissolved in 50.0 ml of water. 1.00 ml of this solution was placed in a 10.0 ml flask and diluted to the mark. the absorbance of this diluted solution at 510 nm was 0.472 in a 1.000 cm cuvet. the molar absorptivity of the compound, at 510 nm, is 6,310 m-1 cm-1. calculate the concentration of the compound in the initial 50.0 ml solution.
The concentration of the compound in the initial 50.0 ml solution is 0.0172 g/L.
The concentration of the compound in the initial 50.0 ml solution can be calculated as follows:
First, we need to calculate the absorbance of the 1.00 ml solution in the 10.0 ml flask:
Absorbance = (0.472)(10.0/1.000) = 4.72
Next, we can use the Beer-Lambert Law to calculate the concentration of the compound in the initial solution:
A = εbc
where A is the absorbance, ε is the molar absorptivity, b is the path length (1.000 cm), and c is the concentration in mol/L.
Plugging in the values we have:
4.72 = (6,310 M^-1 cm^-1)(1.000 cm)(c)
Solving for c, we get:
c = 7.48 x 10^-5 mol/L
Finally, we can convert this to the concentration in the initial 50.0 ml solution:
moles of compound = (7.48 x 10^-5 mol/L)(0.0500 L) = 3.74 x 10^-6 mol
mass of compound = (229.61 g/mol)(3.74 x 10^-6 mol) = 0.000859 g
Concentration = mass/volume = 0.000859 g/0.0500 L = 0.0172 g/L
Therefore, the concentration of the compound in the initial 50.0 ml solution is 0.0172 g/L.
To know more about the Solution, here
https://brainly.com/question/16083903
#SPJ4
Na2co3(aq) + cocl2(aq) --> express your answer as a chemical equation. enter noreaction if no precipitate is formed. nothing
The reaction is a double displacement reaction, in which two ions switch places in the reactants to form the products. The chemical equation for the reaction between Na2CO3 (aq) and NaCl2 (aq) is as follows:
2 Na2CO3 (aq) + NaCl2 (aq) → 2 NaCl (aq) + CO2 (g) + H2O (l).
In this reaction, sodium carbonate (Na2CO3) reacts with sodium chloride (NaCl2) to form sodium chloride (NaCl), carbon dioxide (CO2) and water (H2O). The reaction is a double displacement reaction, in which two ions switch places in the reactants to form the products. The sodium ions in the Na2CO3 react with the chloride ions in the NaCl2 to form the NaCl, while the carbonate ions in the Na2CO3 react with the sodium ions in the NaCl2 to form CO2 and H2O.
The reaction does not form a precipitate, so no solid product is formed. This is because both the reactants and products are soluble in water, and so no solid product is formed.
Overall, this reaction between Na2CO3 and NaCl2 results in the formation of NaCl, CO2 and H2O, and no solid precipitate is formed. This is because both the reactants and products are soluble in water, and so no solid product is formed.
Know more about chemical equation here
https://brainly.com/question/28792948#
#SPJ11
Consider the titration of 30. 0 ml of 0. 050 m nh3 with 0. 025 m hcl. Calculate the ph after the following volumes of titrant have been added.
The pH of the solution after the addition of 60 mL of titrant (HCl) is 8.5. This is because when the titrant is added, the reaction between NH3 and HCl takes place, forming NH4Cl, which is an acidic species.
What is pH ?pH is a measure of the acidity or alkalinity of a solution. It is measured on a scale from 0-14, with 7 being neutral. A pH below 7 is considered acidic, while a pH above 7 is considered basic or alkaline. Solutions with a pH less than 7 are said to be acidic, and solutions with a pH greater than 7 are said to be basic. pH is an important parameter in many chemical and biological processes, as it can affect the solubility, reactivity, and stability of the molecules in a solution.
The pH of the solution after the of 90 mL of titrant (HCl) is 6.5. This is because the reaction between NH3 and HCl continues until all of the NH3 is consumed, and the pH of the solution continues to decrease as the amount of HCl increases.
To learn more about pH
https://brainly.com/question/172153
#SPJ4
Help what’s the answer?
The product is HI
There are six product molecule
Hydrogen is the limiting reactant
There is one iodine molecule in excess
How do you know limiting reactant?To determine the limiting reactant in a chemical reaction, you need to compare the number of moles of each reactant present to the stoichiometry of the balanced chemical equation.
The limiting reactant is the reactant that is completely consumed in a chemical reaction, and which therefore limits the amount of product that can be formed. The other reactant, which is not completely consumed, is called the excess reactant.
Learn more about limiting reactant:https://brainly.com/question/14225536
#SPJ1
How many grams of so2 are in 0. 410l of so2 gas at stp?
At STP (Standard Temperature and Pressure), one mole of any ideal gas occupies 22.4 liters of volume. The molar mass of SO2 (sulphur dioxide) is 64.06 g/mol.
To calculate the mass of SO2 in 0.410 L of SO2 gas at STP, we can first calculate the number of moles of SO2 using the ideal gas law:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles, R is the gas constant (0.08206 L·atm/mol·K) and T is the temperature. At STP, the temperature is 273 K.
So, n = (PV)/(RT) = [(1 atm) x (0.410 L)]/[(0.08206 L·atm/mol·K) x (273 K)] = 0.0162 mol
Therefore, there are 0.0162 moles of SO2 in 0.410 L of SO2 gas at STP.
Finally, we can calculate the mass of SO2 using the molar mass of SO2:
mass = number of moles x molar mass
mass = 0.0162 mol x 64.06 g/mol = 1.04 g
Therefore, there are 1.04 grams of SO2 in 0.410 L of SO2 gas at STP.
To learn more about ideal gas law, click here: brainly.com/question/13821925
#SPJ11
How many electron domains does CO have?
CO is made up of carbon (C) and oxygen (O) that are covalently bound and share electrons to create a molecule. To determine a molecule's electron domain shape, we count the number of electron domains surrounding the core atom.
An electron domain can be a bond pair or a single electron pair.
The central atom in CO is carbon, which is double-bonded to oxygen. As a result, the carbon atom has two electron domains: one from the double bond with oxygen and one from the two lone pairs of electrons on oxygen.
As a result, CO contains two electron domains surrounding the center carbon atom.
CO, as a result of the double bond with oxygen and two lone pairs of electrons on oxygen, has two electron domains surrounding its center carbon atom.
learn more about the electron domain here
https://brainly.com/question/30912314
#SPJ1