Stereoisomers share the same connectivity and differ only in the way their atoms are arranged in space. Draw the structure of a compound that is a stereoisomer of trans-1,2-dibromocyclobutane.(Note that the question asks for a different stereoisomer of the named compound and not the named compound itself.)Use the wedge/hash bond tools to indicate stereochemistry.Show stereochemistry in a meso compound.In cases where there is more than one answer, just draw one. (use same instructions below)
1b) Draw the structure of a compound that is a stereoisomer of cis-1,2-dimethylcyclopentane.1c) Draw the structure of a compound that is a stereoisomer of cis-1,2-dimethylcyclobutane.

Answer:

Explanation:

During a physical temperature change, one substance, such as water will be heated. Because one compound is mixed in with another. Therefore, these reactants produce a product. When the reactants are mixed, the temperature change caused by the reaction is an indicator of a chemical change.

Answer:

the types of minerals in the rock

Answer:

C

Explanation: I took the test and got it right (first person is right)

Answer:

5.30x10²³g

Explanation:

A mole can be understood as an amount of something.

One mole of eggs are 6.022x10²³ eggs

One mole of atoms are 6.022x10²³ atoms

One mole of molecules are 6.022x10²³ molecules

And 1 mole of M&M are 6.022x10²³ M&M. As 1 M&M weighs 0.88g, 1 mole will weigh:

0.88g*6.022x10²³ =

One mole of M&Ms will weigh  5.3 x 10²³ grams.

The given parameters

One mole of every substance contains 6.022x10²³ atoms of the substance.

Weight of an M&M, implies an atom of M&M.

1 atom --------- 0.88 grams

 6.022x10²³ atoms = ?

= 0.88 g x  6.022x10²³

= 5.3 x 10²³ grams.

Thus, one mole of M&Ms will weigh  5.3 x 10²³ grams.

Learn more about number of atoms in a substance here: https://brainly.com/question/15193101

Answer:

Ar

Explanation:

Chlorine has an atomic number of 17. That means that it has 17 protons and 17 electrons, thus being electrically neutral. When it gains 1 electron to form the chloride ion, the total number of electrons is 17 + 1 = 18.

Argon is a noble gas with an atomic number of 18, that is, it has 18 protons and 18 electrons.}

Then Cl⁻ has the same number of electrons as Ar.

Answer:

The amino sequence of an octapeptide can be determined by :

i.Amino acids present in the peptide

ii.By the behaviour shown by the treatment of these material with different biological and chemical reactions

As shown ammonium was released from the peptide,which shows that the peptide contains either Asn or Gln.

As there is presence of Asp in the amino acid analysis which indicates that the octapeptide contains Asp.

Acid hydrolysis hydrolyzes the peptide bonds which yields a Ala-Val  which is the result of partial acid hydrolysis.

Chymotrypsin is on the C-terminal side of the aromatic amino acids Phe, Tyr, and Trp. The peptide has Tyr which indicates that  the two present tetrapeptides after chymotrypsin treatment are fourth and eighth amino acids i-e N--Tyr-C and Tyr as the fourth amino acid and Ala-Val somewhere in the octapeptide

As Arg is only present on the C terminal side  of the Trypsin cleavage therefore Arg must be the second or the sixth amino acid for the two dipeptides to form as a result of arginine treatment of a tetrapeptide

Cyanogen bromide cleaves on the C-terminal side of Met residues. For free Tyr to be produced from cyanogen bromide treatment of one of the tetrapeptides, Met must be either the third or seventh amino acid. Because Ala was present in both tetrapeptides, Ala must be either the first or fifth amino acid, present in the same tetrapeptide as Arg and Met,i-e N.-Tyr-C and Ala-Val somewhere in the octapeptide and Ala-Arg-Met as the first, second, and third or fifth, sixth, and seventh amino acids and Tyr as the fourth amino acid.

One of the tetrapeptides contains Ala-Val as its second and third amino acids and Asn as its N-terminal amino acid. Therefore two combinations are possible as below

N-Asn-Ala-Val-Tyr-Ala-Arg-Met-Tyr-C or N-Ala-Arg-Met-Tyr-Asn-Ala-Val-Tyr-C

Answer:

The amino aciid sequence of an octapeptide can be determined from the amino acids that are present in the peptide and from the results of different chemical and biological treatments.

One equivalent of ammonium was released fro the peptide, indicating that the peptide contains either Asn or Gln. The presence os Asp in the amino analysis indicates that the octapeptide contains Asn.

A) Acid hydrolysis hydrolyzes peptide bonds. The dipeptide Ala-Val is obtained by partial acid hydrolysis. The indicates that Ala-Val is present in the peptide

B) Chymotrypsin cleaves on the C-terminal side of the aromatic amino acids. Phe, Tyr, and Trp. The peptide contains only Tyr. The presence of tetrapeptides after the treatment of ohymotrypsin indicates that Tyr is the fourth and eighth amino acids.

N-Tyr-C and Tyr present as the fourth amino acid. in constrast, Ala-Val is present in the octapeptide

C) Trpsin cleaves on the C-terminal side of Arg and Lys residues. only Arg is present in the octapeptide. Arg must be the second or sixth amino acid, for two dipeptide to be formed from arginine during the treatment of one tetrapeptide.

D) Cyanogen bromide cleaves on the C-terminal side of Met residues. For free Tyr to be produced from cynogen bromide treatment of one of the tetrapeptides, Met must be either the third or seventh amino acid. Because Ala is present in both tetrapeptides, Ala must be either the first or fifth amino acid, present in the same tetrapeptide as Arg and Met.

In addition, presence of N-...-Tyr-C and Ala-Val in the octapeptide and Ala-Arg-Met as the first, second, third or fifth, sixth or seventh amino acids and Tyr as the fourth amino acid.

E) One of the tetrapides contains Asn as its N-terminal amino acid, and Ala-Val as its second and third amino acids. Two octapeptides are possible from this peptide analysis.

The amino acid sequence of the octapeptide is the following:

N-Asn-Ala-Val-Tyr-Ala-Arg-Met-Tyr-C:

N-Ala-Arg-Met-Tyr-Asn-Ala-Val-Tyr-C:

For more information visit,

https://brainly.com/question/18122741

Answer:

Any element placed in a flame will change its color. Atoms are made of positively charged nuclei, about which negatively charged electrons move according to the laws of quantum mechanics. Quantum mechanics constrains them to appear in various distinct patterns, called orbitals. (Orbitals are a lot like planetary orbits, but blurrier, so that you're never quite sure just where the electrons are.)

Left on their own, the electrons of an atom tend to relax into orbitals that leave the atom with the lowest possible energy--its ground state. Putting atoms into a flame, though, adds energy to the looser electrons farthest from the nucleus and pushes them into other orbitals. Eventually, these excited electrons drop back to where they ought to be, and in so doing, they release the energy they stored up as particles of light, called photons.

Explanation:

Answer:

ionic bonds also called electrovalent bonds areee bonds that exist two metals.It is an electrostatic attraction between positive and negative ions in a Crystal lattice.

Explanation:

examples of elements with this bond are

hydrogen chloride

copper oxide

potassium bromate

Answer:

Black holes are merely the most exotic example of the general principle that ... quantum computer stores bits on protons and uses magnetic fields to flip them. ... Powered by Standard Model software, the universe computes

Explanation:because they are mostly exotic

C.

centi- is essentially 10^2 of one meter.

If you had 100m, multiplying 100 by 10^2 (or 100) would give you 10000 cm.

Answer:

S–34

Explanation:

From the question given above, the following data were obtained:

Neutron number = 18

The isotope of sulphur still retains its atomic number of 16.

Recall:

Atomic number = proton number

Atomic number of sulphur (S) = 16

Therefore,

Proton number = 16

Next, we shall determine the mass number of the sulphur isotope. This can be obtained as follow:

Proton number = 16

Neutron number = 18

Mass number =.?

Mass number = Proton + Neutron

Mass number = 16 + 18

Mass number = 34

The symbol for sulphur is S.

Thus, the symbol of sulfur isotope that contains 18 neutrons is S–34

(D) At equilibrium, the concentration of the products will be much higher than the concentration of the reactants.

Answer:

I think its b

Explanation:

Answer:

(a)Double Replacement

(b)Double Replacement

(c)Single replacement

(d)single replacement

(e) synthesis

Answer:

144 g of phosphorus contain 4.65 moles.

Explanation:

Given data:

Mass of phosphorus = 144 g

Number of moles = ?

Solution:

Formula:

Number of moles = mass/ molar mass

Molar mass of phosphorus is 31 g/mol

Now we will put the values in formula.

Number of moles = 144 g/ 31 g/mol

Number of moles = 4.65 mol

Thus, 144 g of phosphorus contain 4.65 moles.

Answer:

THE ANSWER IS "O E. The voltage and current doubles.​"

I IT HELPS YOU....

Answer:

They are both doubled, answer E

Explanation:

Answer:

V = 34430 mL

Explanation:

Given data:

Volume in mL = ?

Number of moles of gas = 2.00 mol

Temperature = 36°C (36+273= 309K)

Pressure of gas = 1120 torr

Solution:

Formula:

PV = nRT

V = nRT/P

V = 2.00 mol ×62.4 torr • L/mol · K × 309K / 1120 torr

V = 38563.2 torr • L / 1120 torr

V = 34.43 L

L to mL

34.43 L ×1000 mL / 1 L

34430 mL

Answer:

Inertia

Explanation:

Inertia is the tendency of an object to resist a change in motion. Newton's First Law of Motion is also called the law of inertia. A full aquarium is harder to move than an empty one because the law of inertia.

Answer:

they will repel each other

Explanation:

When these two are brought close to one another they will repel each other. This is similar to what happens with magnets, when two objects share the same polarity one object will create a repulsive force upon the second object and push it away. This repellent force is caused by an electric field from the same charged electrons in the atoms of the object. Since in this case both the glass rod and the pinwheel have a negative charge they will repel each other when they come into proximity of one another.

Answer:

This question is incomplete

Explanation:

This question is incomplete because of the absence of the ALEKS Data's resource. However the steps required to answer questions that tests the heat of solution and heat of reaction are all the same.

1. The description provided in the question is an exothermic reaction; this is because exothermic reaction is a reaction that releases/gives off heat into the environment. The heat given-off here is what the student observed as "the temperature of the water rise from to over the course of minutes".

2. To calculate the amount of heat that was released/heat of solution (q) in joules;

q = m × Cg × (T2 - Ti)

where m = mass of water (can also be represented as volume)

Cg = specific heat capacity of water (4.184 joules)

T2 = final temperature of the solution

Ti = initial temperature of the solution

(T2 -Ti) is temperature change of the solution

3. Generally, enthalpy change for exothermic reaction is negative

Hence the formula for enthalpy change/heat of reaction (ΔH);

ΔH = - (q/1000 ÷ number of moles of solute)

Where q is the heat of solution determined in (2) above

number of moles = mass/molar mass of solute

molar mass of NaOH = 23 + 16 + 1 = 40 g/mol (where Na = 23, O = 16 and H = 1)

Answer: A. The negative ionic radius is larger than the neutral atomic radius.

Explanation: Did the test just now

The energy related to the change of state represented by the model is  atoms gain energy as a solid changes to a liquid. Thus option A is correct.

Energy is defined as the quantitative property that is imparted to a body or a physical system and is visible in the performance of work as well as in the form of heat and light.

It can also be defined as ability to perform work.

There are basically nine types of energy:

There are two more forms of energy.

In terms of atomic randomness, the gas contains atoms with extremely high kinetic energies. Atoms in the solid are only vibrating where they should be. As a result, for a gas to become a solid, some energy must be lost within the atom.

Thus, the energy related to the change of state represented by the model is  atoms gain energy as a solid changes to a liquid. Thus option A is correct.

To learn more about energy, refer to the link below:

https://brainly.com/question/1932868

#SPJ5

Answer: Option A

Explanation: took the test

Answer:

a plus sign: +

Explanation:

a plus sign is used to separate one reactant or product from another

Answer:

(Chemical Formulas test)

1.Which formula contains a metal and a nonmetal?

answer:(MGO)

2.Which formula represents a covalent compound?

answer:(H2O2)

3.In the formula for water (H2O), what does the lack of a subscript after the O indicate? answer:(There is one oxygen atom in the compound.)

4.What symbol is used to separate the products from each other or the reactants from each other in a chemical reaction?answer: (A PLUS SIGHN)

5.Which option is a covalent compound?

answer:(NO2)

Explanation:

Took the Test and got 100% thank me later

Answer:

We have the final answer as

[tex]4.69 \times {10}^{ - 19} \: \: J[/tex]

Explanation:

To find the energy of a photon of this light we use the formula

where

E is the energy

f is the frequency

h is the Planck's constant which is

6.626 × 10-³⁴ Js

From the question

f = 7.08×10¹⁴ Hz

We have

E = 7.08×10¹⁴ × 6.626 × 10-³⁴

We have the final answer as

[tex]4.69 \times {10}^{ - 19} \: \: J[/tex]

Hope this helps you

Answer:

When an electron temporarily occupies an energy state greater than its ground state, it is in an excited state. An electron can become excited if it is given extra energy, such as if it absorbs a photon, or packet of light, or collides with a nearby atom or particle.

Explanation:

Hope this helps.

Have a good night ma´am/sir.

Be safe!

Answer:

so I don't know how to answer that