Steam enters the first-stage turbine shown in the figure at 40 bar and 400oC with a mass flow rate of 60,000 kg/hr. Steam exits the first-stage turbine at 20 bar and 400oC. The steam is then reheated at constant pressure to 500oC before entering the second-stage turbine. Steam leaves the second stage as saturated vapor at 0.6 bar. Assume steady state operation and ignore stray heat transfer and kinetic and potential energy effects. Determine the volumetric flow rate of the steam at the inlet to the first-stage turbine, in m3/min, the rate of heat transfer to the steam flowing through the reheater, in kW, and the total power produced by the two stages of the turbine, in kW.

Answer:

24cm sureeeereereeeeee

Answer:

To be able to develop as a human and give back to the community. To ensure that people have safe food and water to drink, clean fuel and energy sources, and in general a safe enviornment to live in.

Explanation:

The reasons why someone might choose to study agricultural and biosystems engineering are highly individual and can depend on a variety of factors, such as personal interests, career goals, and educational background.

Many students who decide to study agricultural and biosystems engineering are interested in farming, making food, and sustainable agriculture. They might want to find new ways to make more food or improve how farmers work.

Agricultural and biosystems engineering is a field that focuses on creating systems and processes that are good for the environment.

Students who care about the environment may decide to learn about this subject because it focuses on reducing waste, saving resources, and causing less harm to the environment.

Agricultural and biosystems engineering is a field that combines different areas of knowledge such as biology, chemistry, physics, and computer science. Students who like to work in different subjects might find this field perfect for their interests and abilities.

Learn more on biosystem on https://brainly.in/question/53109597

#SPJ2

Answer:

resistance = 2.52 ohms

Explanation:

from the formula

V =IR

Voltage = (current)(resistance)

Resistance =

R=

R= 2.52 ohms

A solid line around a component indicates that the component is complete. A dashed line around the component indicates that the component is being shown is not complete.

I would honestly select every one of the given options. Gor a company evaluating this new material it would be very valuable to hit each of these factors.

Answer:

2.5=1500/Whp=> Whp=600 kWh

delWgain=1500-600=900 kWh

Money saved= 900* 6tk*=5400 tk

Answer: A small block A is placed on the disk in its lowest position P at a distance r from the axis when the disk is at rest. The angular velocity

Explanation:

check all the photos

check photos (answer)

Comparing this to the actual power required for the two-stage compressor (242.6 kW), we can see that the actual power required is significantly higher.

Work done is the amount of energy transferred to or from a system as a result of a force acting on it over a distance.

To solve this problem, we can use the following steps:

Step 1: Determine the state points of the air at various stages of the compression process.

Stage 1: Inlet state = State 1

P1 = 100 kPa, T1 = 300 K, V1 = 10 m³/min

Stage 2: After the first stage of compression = State 2

P2 = 1200 kPa, T2 = ? (isentropic compression)

Stage 3: After intercooling = State 3

P3 = 350 kPa, T3 = 300 K, V3 = V2

Stage 4: After the second stage of compression = State 4

P4 = 1200 kPa, T4 = ? (isentropic compression)

Step 2: Calculate the temperature and specific volume at states 2 and 4 using the isentropic compression process.

For an isentropic compression process, we have:

(P2/P1)^((γ-1)/γ) = T2/T1

(P4/P3)^((γ-1)/γ) = T4/T3

where γ is the ratio of specific heats for air, which is approximately 1.4.

Solving for T2 and T4, we get:

T2 = T1*(P2/P1)^((γ-1)/γ) = 300*(1200/100)^((1.4-1)/1.4) = 742.6 K

T4 = T3*(P4/P3)^((γ-1)/γ) = 300*(1200/350)^((1.4-1)/1.4) = 892.5 K

Next, we can use the ideal gas law to calculate the specific volume of air at states 2 and 4:

V2 = V1*(P1/P2)(T2/T1) = 10(100/1200)(742.6/300) = 0.1867 m³/kg

V4 = V3(P3/P4)(T4/T3) = 10(350/1200)*(892.5/300) = 0.2604 m³/kg

Step 3: Calculate the work done in each stage of the compressor.

For an isentropic compression process, the work done can be calculated using the following equation:

W = (mCp)(T2-T1) = (mCp)(T4-T3)

where m is the mass flow rate of air, which can be calculated using the specific volume and inlet volumetric flow rate:

m = V1/(v160) = 10/(0.831460) = 0.2016 kg/s

Cp is the specific heat at constant pressure for air, which is approximately 1.005 kJ/kg-K.

Thus, the work done in each stage of the compressor is:

W1 = (0.20161.005)(742.6-300) = 77.2 kW

W2 = (0.20161.005)(892.5-300) = 116.9 kW

The total work done by the compressor is:

W_total = W1 + W2 = 77.2 + 116.9 = 194.1 kW

Step 4: Calculate the power required to run the compressor.

The power required to run the compressor can be calculated using the following equation:

Power = W_total/η

where η is the compressor efficiency.

We are not given the efficiency, but for a two-stage compressor, a reasonable estimate for η is reasonable estimate for the efficiency of a two-stage compressor is around 75-85%. Therefore, we can assume η = 0.8.

Using this efficiency value, the power required to run the compressor is:

Power = W_total/η = 194.1/0.8 = 242.6 kW

Step 5: Compare the result to the power required for isentropic compression from the same inlet state to the same final pressure.

For isentropic compression from the same inlet state to the same final pressure, the work done can be calculated using the following equation:

W = (mCp)(T2-T1) = (mCp)(T4-T3) = (m*Cp)*ΔT

where ΔT = T2-T1 = T4-T3 = 442.5 K

Thus, the work done for isentropic compression is: W_iso = (0.2016*1.005)*442.5 = 89.1 kW

For more details regarding work done, visit:

https://brainly.com/question/13662169

#SPJ2

An extremum is a point where the function has its highest or lowest value, and at which the slope is zero.

The dimensions to be used if the volume is fixed and the cost of construction is to be kept to a minimum is as follows;

Reason:

The given parameters are;

Form of silo = Cylinder surmounted by a hemisphere

Cost of construction of hemisphere per square unit = 2 × The cost of of construction of the cylindrical side wall

Required:

The dimensions to be used if the volume is fixed and the cost of construction is to be kept to a minimum

Solution:

The fixed volume of the silo, V, can be expressed as follows;

[tex]V = \pi \cdot r^2 \cdot h + \dfrac{2}{3} \cdot \pi \cdot r^3[/tex]

Where;

h = The height of the cylinder

r = The radius of the cylinder

The surface area is, Surface Area = 2·π·r·h + 2·π·r²

The cost, C = 2·π·r·h + 2×2·π·r² = 2·π·r·h + 4·π·r²

Therefore;

[tex]C = 2 \times \pi \times r\times \dfrac{V - \dfrac{2}{3} \cdot \pi \cdot r^3 }{\pi \cdot r^2 } + 4 \cdot \pi \cdot r^2 = \dfrac{8 \cdot r^3 \cdot \pi + 6 \cdot V}{3 \cdot r}[/tex]

At the minimum value, we have;

Which gives;

16·π·r³ = 6·V

Which gives;

[tex]h = \dfrac{\dfrac{8 \cdot \pi \cdot r^3}{3} - \dfrac{2}{3} \cdot \pi \cdot r^3 }{\pi \cdot r^2 } = 2 \cdot r[/tex]

h = 2·r

The height of the silo, h = 2 × The radius, 2

Therefore, the dimensions to be used if the volume is fixed and the cost is to be kept to a minimum is, height, h = 2 times the radius

Learn more about extremum point here:

https://brainly.com/question/2869450

Explanation:

This means that for every 1 cm on the drawing, there is 80 cm in reality. To put it another way, take this

1:80 means that the building is 80 times the size of the drawing

80:1 means that the drawing is 80 times the size of the building

If it were 80:1, the drawing itself would be over 100m long.

check photo (answer)

The angular velocity of the water bath as the crank is driven clockwise is 6.66rpm/ms.

From the complete information, we are to use the relative velocity method to determine the angular velocity of the water bath.

This will be:

60/V = 1085.4/120.58

Cross multiply.

(1085.4 × V) = (120.58 × 60)

V = (120.58 × 60/1085.4)

V = 6.66rpm/ms

Learn more about angular velocity on:

https://brainly.com/question/626479

#SPJ2

Explanation:

is an example of an electrical device.

Cable

Answer:

Alvaro designs machinery and equipment for ships. His job title is best described as Marine Engineer.

Jeanette draws maps and plans for freeway projects. Her job title is best described as Civil Drafter.

Joseph designs a new airport. His job title is best described as Transportation Engineer.

Geraldine designs imaging systems that use light. Her job title is best described as Photonics Engineer.

Hope this helps sorry I am late to respond, but anyone else who needs the answer it is here.

Based on the above, Alvaro is a Marine Engineer;

Machinery and Equipment are known to be a type of industrial tools, devices, and items that aids facilities.

Conclusively, They are said to be tangible personal property that are used as a tool for repair parts, etc. Professions in ship jobs includes, Marine Engineer, Photonics Engineer, etc.

Learn more about  machinery and equipment from

https://brainly.com/question/1203520

Answer:

Please check the photo (solve)

this looks like its the different phases of a single cylinder 4 stroke engine what are you doing in the picture or assignment though matching the numbers to the descriptions on the side?

analyzing building materials???????????? but i can try i think it is analyzing the materials of the building

Answer: the stress is 384 pounds per square inch.

Step-by-step explanation:

Let S represent the stress in the material of the pipe.

Let P represent internal pressure of the pipe.

Let D represent internal diameter of the pipe.

Let T represent the thickness of the pipe.

The stress in the material of a pipe subject to internal pressure varies jointly with the internal pressure and the internal diameter of the pipe and inversely with the thickness of the pipe. Introducing a constant of proportionality, k, the expression becomes

S = kPD/T

The stress is 100 pounds per square inch when the diameter is 5 inches, the thickness is 0.75 inch, and the internal pressure is 25 pounds per square inch. It means that

100 = (k × 25 × 5)/0.75

125k = 100 × 0.75 = 75

k = 75/125 = 0.6

The equation representing the relationship becomes

S = 0.6PD/T

If the internal pressure is 40 pounds per square inch, the diameter is 8 inches and the thickness is 0.50 inch, then the stress would be

S = (0.6 × 40 × 8)/0.5

S = 384

Answer:

Static electricity can build up and

deliver an electric shock to the user drilling with an electric drill or any drill can create static electricity but with electric drills the static electricity can react with the drills power supply creating a short circuit proceeding to shock you which is why electric drills have rubber grips around them to INSULATE the shock if It does happen (also that's why the drills mostly are made up of non conductive materials.)

as the public need for preventing injuries and deaths from car crashes became known,laws were enacted to mandate the inclusion of seatbelts in almost all passengers vehicles

Answer:

volunteer coordinator

Explanation:

because they are volunteering for that and in most of the cases they do not expect to be paid

Answer:

  Quantity B is greater.

Explanation:

Given:

  (x -2y)(x +2y) = 4

  A = x² -4y²

  B = 8

Find:

  the relationship between A and B

Solution:

The given expression can be expanded to give ...

  x(x +2y) -2y(x +2y) = x² +2xy -2xy -4y² = x² -4y²

This is precisely the expression designated as A. Its value is 4.

  4 < 8

  A < B

Quantity B is greater.

RAM is called “random access” because any storage location on the computer can be accessed directly (as opposed to randomly).

Now hear me out: Steel-Coated Coconuts

If you want to make a coconut harder you can take that shell up to heights its natural husk never even knew it could reach! Combining the raw, brown scraglley-ness with the tough, durable properties of steel would most definitely make a coconut harder.

Valid answer? Probably not.

Thank you for coming to TedTalk :))

The basic characteristic of the taxi service is that some taxi services are as extensive in range as either urban mass transit or commercial airlines.

A taxi is a cab that one hired b a single person or a group and they have a nonshared ride. The taxi service is found in various international destinations all over the world and especially at the airports, restaurants and hotels. Some place's taxi services are extensive and include the urban transits.

Find out more informaion about the taxi services.

brainly.com/question/25672789

Answer:

Amends the FMVSS on air brake systems to improve the stopping distance performance of truck tractors. The rule requires the vast majority of new heavy truck tractors to achieve a 30 percent reduction in stopping distance compared to currently required levels. For these heavy truck tractors (approximately 99 percent of the fleet), the amended standard requires those vehicles to stop in not more than 250 feet when loaded to their gross vehicle weight rating (GVWR) and tested at a speed of 60 miles per hour (mph). For a small number of very heavy severe service tractors, the stopping distance requirement will be 310 feet under these same conditions. In addition, this final rule requires that all heavy truck tractors must stop within 235 feet when loaded to their “lightly loaded vehicle weight” (LLVW).

Amends the FMVSS on air brake systems to improve the stopping distance performance of truck tractors. The rule requires the vast majority of new heavy truck tractors to achieve a 30 percent reduction in stopping distance compared to currently required levels. For these heavy truck tractors (approximately 99 percent of the fleet), the amended standard requires those vehicles to stop in not more than 250 feet when loaded to their gross vehicle weight rating (GVWR) and tested at a speed of 60 miles per hour (mph). For a small number of very heavy severe service tractors, the stopping distance requirement will be 310 feet under these same conditions. In addition, this final rule requires that all heavy truck tractors must stop within 235 feet when loaded to their “lightly loaded vehicle weight” (LLVW).

Answer:

power window controls

Explanation:

Answer:

Post navigation. The technical excellence of separation achieved in a mineral concentration process, or any other process where two constituents of any kind are physically separated from each other, is expressed uniquely and quantitatively by the Separation Efficiency: Es = (R – Rg)

Explanation:

hope it helps.