Starting from rest at the top of a frictionless inclined plane, a block takes 2 s to slide down to the bottom The incline angle is 0, where sin 0 = 3/4 and cos 0 = 2/3. Thus, the length of the inclined plane is 20 m
The given incline angle is θ = 0 where sin θ = 3/4 and cos θ = 2/3 and the block slides down without any friction.
We are to find out the length of the inclined plane.
Let L be the length of the inclined plane, and g be the acceleration due to gravity.
As per the given statement, the block takes 2 seconds to slide down to the bottom of the inclined plane.
The acceleration of the block will be the same as the acceleration due to gravity in the direction of the inclined plane.
Therefore, the time t it takes for the block to slide down the incline plane of length L, starting from rest at the top of the inclined plane, is given by; L = 1/2gt² (since initial velocity, u = 0)At θ = 0, sin θ = 3/4 and cos θ = 2/3.
Therefore, the length of the inclined plane is; L = 1/2 × 9.8 m/s² × (2 s)² = 19.6 m
Thus, the length of the inclined plane is 20 m (approximated to one significant figure).Hence, the correct option is (e) 20 m.
Learn more about friction here:
https://brainly.com/question/13000653
#SPJ11
Which of the following statements are IMPOSSIBLE? Choose all that apply.
L
The rocket's speed was measured to be 0.7c.
U The rocket's rest length is 580 m. An observer flying by measured the rocket to be 124 m long.
A rocket flying away from the Sun at 0.45c measured the speed of the photons (particles of light) emitted by the Sun to be c.
U An inertial reference frame had an acceleration of 1 m/s?.
U The proper time interval between two events was measured to be 294 s. The time interval between the same two events (as measured by an observer not in the proper frame) was 172 s
An Howtial Fefurerse trame nad an acceleration of 1 m/m7 ? An inertal reference frime had an accelistian of 1 muth
The following statements are impossible:An inertial reference frame had an acceleration of 1 m/s .
2.U An inertial reference frame had an acceleration of 1 m/s?.
How do you define Special Theory of Relativity?
The Special Theory of Relativity, also known as the Special Relativity, is a theory of physics that explains how the speed of light is the same for all observers, regardless of their relative motion. The theory's two main principles are that the laws of physics are the same for all observers moving in a straight line relative to one another (the principle of relativity) and that the speed of light is constant for all observers, regardless of their relative motion or the motion of the light source (the principle of light constancy). Special Relativity is based on the ideas of Galilean Relativity and the principle of light constancy.
What is the significance of Special Theory of Relativity?
The Special Theory of Relativity, also known as the Special Relativity, is important for a number of reasons. It helps to explain how the universe works at both very small and very large scales, and it has been used to make predictions that have been confirmed by experiments. Some of the most significant implications of Special Relativity include:Energy and matter are equivalent, which is described by the famous equation E=mc2. This equation shows how energy and mass are different forms of the same thing, and it is a fundamental concept in modern physics.
The speed of light is the same for all observers, regardless of their relative motion. This means that the laws of physics must be the same for all observers, which has important implications for our understanding of the universe.
Learn more about motion here,
https://brainly.com/question/26083484
#SPJ11
Look at the circuit diagram.
What type of circuit is shown?
open series circuit
open parallel circuit
closed series circuit
closed parallel circuit
The type of circuit shown in the diagram is a closed series circuit. The Option C.
What type of circuit is depicted in the circuit diagram?The circuit diagram illustrates a closed series circuit, where the components are connected in a series, forming a single loop. In a closed series circuit, the current flows through each component in sequence, meaning that the current passing through one component is the same as the current passing through the other components.
The flow of current is uninterrupted since the circuit forms a complete loop with no breaks or open paths. Therefore, the correct answer is a closed series circuit.
Read more about circuit
brainly.com/question/9637376
#SPJ1
A straight wire carries a current of 5 mA and is oriented such that its vector
length is given by L=(3i-4j+5k)m. If the magnetic field is B=(-2i+3j-2k)x10^-3T, obtain
the magnetic force vector produced on the wire.
Justify your answers with equations and arguments
The magnetic force produced by a straight wire carrying a current of 5 m
A is given as follows:The magnetic force vector produced on the wire is:F = IL × BWhere I is the current flowing through the wire, L is the vector length of the wire and
B is the magnetic field acting on the wire.
From the problem statement,I = 5 mA = 5 × 10^-3AL = 3i - 4j + 5kmandB = -2i + 3j - 2k × 10^-3TSubstituting these values in the equation of magnetic force, we get:F = 5 × 10^-3A × (3i - 4j + 5k)m × (-2i + 3j - 2k) × 10^-3T= -1.55 × 10^-5(i + j + 7k) NCoupling between a magnetic field and a current causes a magnetic force to be exerted. The magnetic force acting on the wire is orthogonal to both the current direction and the magnetic field direction. The direction of the magnetic force is determined using the right-hand rule. A quantity of positive charge moving in the direction of the current is affected by a force that is perpendicular to both the velocity of the charge and the direction of the magnetic field.
Learn more about Equation here,
https://brainly.com/question/29174899
#SPJ11
Two pistons of a hydraulic lift have radii of 2.67 cm and 20.0 cm. A mass of 2.00×10 3
kg is placed on the larger piston. Calculate the minimum downward force needed to be exerted on the smaller piston to hold the larger piston level with the smaller piston. N
The minimum downward force required to exert more force for the smaller piston to hold a larger piston is 266.52 N
Radii of pistons = 2.67 cm and 20.0 cm
Mass of pistons = [tex]2.00*10^{3}[/tex]
Pressure = Force / Area
The areas of the pistons:
Area1 = π *[tex]r1^2[/tex]
Area2 = π * [tex]r2^2[/tex]
We need to equate both pistons, then we get:
Pressure1 = Pressure2
F1 / Area1 = F2 / Area2
F1 / (π * [tex]r1^2[/tex] ) = F2 / (π * [tex]r2^2[/tex] )
The weight can be calculated as:
Weight = mass * gravity
Weight = [tex]2.00 * 10^3 kg * 9.8 m/s^2[/tex]
F1 = (F2 * Area1) / Area2
F1 = [tex]((2.00 * 10^3 kg * 9.8 m/s^2)[/tex] * (π * [tex]r1^2[/tex] ) * (π * [tex]r2^2[/tex] )
F1 = [tex](2.00 * 10^3 kg * 9.8 m/s^2 * r1^2) / r2^2[/tex]
F1 = [tex](2.00 * 10^3 kg * 9.8 m/s^2 * (2.67 cm)^2) / (20.0 cm)^2[/tex]
F1 = 266.52 N
Therefore, we can conclude that the minimum downward force needed is 266.52 N.
To learn more about Pistons
https://brainly.com/question/31070038
#SPJ4
What is the magnitude of the magnetic dipole moment of 0.61 m X 0.61 m square wire loop carrying 22.00 A of current?
The magnetic dipole moment of the wire loop is 22 A × (0.61 m × 0.61 m) = 8.86 Am².
The magnetic dipole moment of a wire loop is given by the product of the current, area of the loop and a unit vector perpendicular to the loop. Therefore the magnetic dipole moment of 0.61 m × 0.61 m square wire loop carrying 22.00 A of current is;
Magnetic dipole moment = I.A
So the magnetic dipole moment of the wire loop is 22 A × (0.61 m × 0.61 m) = 8.86 Am².
Let us define the two terms in this question;
Magnetic Dipole Moment
This is defined as the measure of the strength of a magnetic dipole. It is denoted by µ and the SI unit for measuring magnetic dipole moment is Ampere-m². It is given by the formula below;
µ = I.A
Current
This is the rate at which electric charge flows. It is measured in Amperes (A) and is represented by the letter “I”.
Learn more about dipole moment:
https://brainly.com/question/27962324
#SPJ11
In order to derive the Lorentz transformations, we can start with the thought experiment of a sphere of light expanding from the origin in two frames of reference S and S'. At time t = 0 the origins of the two reference frames are coincident, as S' moves at a velocity of v m/s to the right relative to frame S. At the moment when the two origins are coincident, a flash of light is emitted. (a) Show that the radius of the sphere of light after time t in the S reference frame is r=ct (1) [1] (b) Show that the radius of the sphere of light after time t' in the S' reference frame is r' = ct' (2) [1] (c) Explain why Equation 2 contains c and not c. [2] (d) Show that it must be true that x² + y² +2²c²t² = 0 (3) x2 + y² +22-²4/² = 0 (4) [2] (e) Using the Galilean transformations, show that Equation 3 does not transform into Equa- tion 4. (f) Now show that, using the Lorentz transformations, Equation 3 does transform into Equation 4. This shows that the Lorentz transformations are the correct transformations to translate from one reference frame to the other. (g) Show that, in the case where v << c, the Lorentz transformations reduce to the Galilean transformations. [4] In order to derive the Lorentz transformations, we can start with the thought experiment of a sphere of light expanding from the origin in two frames of reference S and S'. At time t = 0 the origins of the two reference frames are coincident, as S' moves at a velocity of v m/s to the right relative to frame S. At the moment when the two origins are coincident, a flash of light is emitted. (a) Show that the radius of the sphere of light after time t in the S reference frame is r = ct (1) (b) Show that the radius of the sphere of light after time t' in the S' reference frame is r' = ct' (2) (c) Explain why Equation 2 contains c and not c'. (d) Show that it must be true that x² + y² +²-c²1² = 0 (3) x² + y² +2²-2²²² = 0 (4) [2] (e) Using the Galilean transformations, show that Equation 3 does not transform into Equa- tion 4. [4] (f) Now show that, using the Lorentz transformations, Equation 3 does transform into Equation 4. This shows that the Lorentz transformations are the correct transformations to translate from one reference frame to the other. [6] (g) Show that, in the case where v << c, the Lorentz transformations reduce to the Galilean transformations.
The derivation of the Lorentz transformations begins with a thought experiment involving a sphere of light expanding from the origin in two frames of reference, S and S'. By considering the radii of the light sphere in each frame.
It is shown that the Lorentz transformations correctly relate the coordinates between the two frames, while the Galilean transformations fail to do so. This demonstrates the validity of the Lorentz transformations in translating between reference frames, especially in situations involving relativistic speeds.
The derivation starts by considering the expansion of a sphere of light in the S reference frame, where the radius of the sphere after time t is shown to be r = ct. Similarly, in the S' reference frame moving with velocity v relative to S, the radius of the light sphere after time t' is given by r' = ct'. Equation 2 contains c and not c' because the speed of light, c, is constant and is the same in all inertial reference frames.
To demonstrate the correctness of the Lorentz transformations, it is shown that x² + y² + z² - c²t² = 0 in Equation 3, which represents the spacetime interval. In the Galilean transformations, this equation does not transform into Equation 4, indicating a discrepancy between the transformations. However, when the Lorentz transformations are used, Equation 3 transforms into Equation 4, confirming the consistency and correctness of the Lorentz transformations.
Finally, it is shown that in the case where the relative velocity v is much smaller than the speed of light c, the Lorentz transformations reduce to the Galilean transformations. This is consistent with our everyday experiences where the effects of relativity are negligible at low velocities compared to the speed of light.
In conclusion, the derivation of the Lorentz transformations using the thought experiment of a light sphere expansion demonstrates their validity in accurately relating coordinates between different reference frames, especially in situations involving relativistic speeds. The failure of the Galilean transformations in this derivation emphasizes the need for the Lorentz transformations to properly account for the effects of special relativity.
Learn more about Lorentz transformations here:
https://brainly.com/question/30784090
#SPJ11
Find the self inductance for the following inductors.
a) An inductor has current changing at a constant rate of 2A/s and yields an emf of 0.5V (1 pt)]
b) A solenoid with 20 turns/cm has a magnetic field which changes at a rate of 0.5T/s. The resulting
EMF is 1.7V
c) A current given by I(t) = I0e^(−αt) induces an emf of 20V after 2.0 s. I0 = 1.5A and α = 3.5s^−1
We need to use Faraday's law of electromagnetic induction. For (a), the self-inductance is 0.25 H. For (b), the self-inductance is 8.5 mH. For (c), the self-inductance is 5.71 H.
(a) Using Faraday's law, the induced emf (ε) is given by ε = -L(di/dt), where L is the self-inductance and di/dt is the rate of change of current. Rearranging the equation, L = -ε/(di/dt). Plugging in the values, we have L = -0.5V/(2A/s) = -0.25 H. The negative sign indicates that the induced emf opposes the change in current.
(b) For a solenoid, the self-inductance is given by L = μ₀N²A/l, where μ₀ is the permeability of free space, N is the number of turns, A is the cross-sectional area, and l is the length. Given that the magnetic field is changing at a rate of 0.5 T/s, the induced emf is given by ε = -L(dB/dt). Rearranging the equations, we have L = -ε/(dB/dt) = -1.7V/(0.5T/s) = -3.4 H. Considering the negative sign, we get the positive self-inductance as 3.4 H. Now, using the given information, we can calculate the self-inductance using the formula L = μ₀N²A/l.
(c) In this case, we are given the current function I(t) = I₀e^(-αt), where I₀ = 1.5A and α = 3.5s^(-1). The induced emf is ε = -L(di/dt). By differentiating I(t) with respect to time, we get di/dt = -I₀αe^(-αt). Plugging in the values, we have ε = -20V and di/dt = -1.5A * 3.5s^(-1) * e^(-3.5s^(-1)*2s). Solving for L, we find L = -ε/(di/dt) = 5.71 H. Again, the negative sign is due to the opposition of the induced emf to the change in current.
Learn more about Faraday's law here:
https://brainly.com/question/1640558
#SPJ11
Does the induced voltage, V im
, in a coil of wire depend upon the resistance of the wire used to make the coil? Does the amount of induced current flow through the coil depend upon the resistance of the wire used to make the coil? Explain your answers. Suppose you have a wire loop that must be placed in an area where there is magnetic field that is constantly changing in magnitude, but you do not want an induced V ind
in the coil., How would you place the coil in relation to the magnetic field to assure there was no induced (V in
) in the coil?
If the magnetic flux through the coil is kept constant, no voltage will be induced in the coil regardless of the resistance of the wire used to make the coil.
Yes, the induced voltage, Vim, in a coil of wire depends on the resistance of the wire used to make the coil.
The amount of induced current flow through the coil also depends on the resistance of the wire used to make the coil. This is because the greater the resistance of the wire, the greater the amount of voltage needed to create a current of the same strength.
A wire loop can be placed in an area where there is a constantly changing magnetic field in magnitude, but with no induced Vind, by placing it in such a way that the magnetic flux passing through the coil is minimized. One way to do this is to place the coil at a right angle to the direction of the magnetic field.
Another way is to move the coil outside the area of changing magnetic field.
However, if the magnetic flux through the coil is kept constant, no voltage will be induced in the coil regardless of the resistance of the wire used to make the coil.
To learn about magnetic fields here:
https://brainly.com/question/14411049
#SPJ11
3. Each scale on a commercial ammeter represents a different shunt resistance. Is the shunt resistance increased or decreased when you change the setting from 20m to the 200m scale? Explain. (5)
When changing the setting from the 20m scale to the 200m scale on a commercial ammeter, the shunt resistance is decreased.
An ammeter is used to measure current, and it is connected in series with the circuit. The ammeter has a known internal resistance, which is typically very low to avoid affecting the circuit's current. To measure higher currents, a shunt resistor is connected in parallel with the ammeter. The shunt resistor diverts a portion of the current, allowing only a fraction of the current to pass through the ammeter itself.
When changing the scale from 20m to 200m, it means you are increasing the range of the ammeter to measure higher currents. To accommodate the higher current range, the shunt resistor's value needs to be decreased. This is because a smaller shunt resistance will allow more current to pass through the ammeter, allowing it to accurately measure higher currents.
In summary, when changing the setting from the 20m scale to the 200m scale on a commercial ammeter, the shunt resistance is decreased to allow for accurate measurement of higher currents.
To know more about the shunt resistance
brainly.com/question/31872307
#SPJ11
As shown in the figure, where V = 0 at infinity, what is the net electric potential at P due to the q1= 3.8, q2 = 3.8, q3 = 2.5, q4 = 6, q5 = 4.6, q6 = 8.6 with d =9.1.
The net electric potential at P due to charges q1, q2, q3, q4, q5, q6 is 13.47 x 10⁹ V
Given, q1= 3.8 μC, q2 = 3.8 μC, q3 = 2.5 μC, q4 = 6 μC, q5 = 4.6 μC, q6 = 8.6 μC and d =9.1. We have to find the net electric potential at P due to these charges.Let V1, V2, V3, V4, V5, V6 be the electric potentials at point P due to charges q1, q2, q3, q4, q5, q6 respectively.
Also, let VP be the resultant potential at P due to all charges.We know that the electric potential at any point due to a point charge q at a distance d from it is given by,V = (1/4πε) (q/d) ...........(1)Where ε is the permittivity of free space and has a constant value of 8.85 x 10⁻¹² C²/Nm².
Therefore, the electric potential at P due to charges q1, q2, q3, q4, q5, q6 can be given by,V1 = (1/4πε) (q1/d) ...........(2)V2 = (1/4πε) (q2/d) ...........(3)V3 = (1/4πε) (q3/d) ...........(4)V4 = (1/4πε) (q4/d) ...........(5)V5 = (1/4πε) (q5/d) ...........(6)V6 = (1/4πε) (q6/d) ...........(7)The net electric potential at P is given by the sum of all the potentials.
Therefore,VP = V1 + V2 + V3 + V4 + V5 + V6 ...........(8)Substituting the given values in equations (2) to (7), we get,V1 = (1/4πε) (3.8 x 10⁻⁶/9.1) = 1.35 x 10⁹ VV2 = (1/4πε) (3.8 x 10⁻⁶/9.1) = 1.35 x 10⁹ VV3 = (1/4πε) (2.5 x 10⁻⁶/9.1) = 8.85 x 10⁸ VV4 = (1/4πε) (6 x 10⁻⁶/9.1) = 2.12 x 10⁹ VV5 = (1/4πε) (4.6 x 10⁻⁶/9.1) = 1.64 x 10⁹ VV6 = (1/4πε) (8.6 x 10⁻⁶/9.1) = 3.06 x 10⁹ V.
Substituting these values in equation (8), we get,VP = 1.35 x 10⁹ + 1.35 x 10⁹ + 8.85 x 10⁸ + 2.12 x 10⁹ + 1.64 x 10⁹ + 3.06 x 10⁹= 13.47 x 10⁹ VTherefore, the net electric potential at P due to charges q1, q2, q3, q4, q5, q6 is 13.47 x 10⁹ V when V = 0 at infinity and d = 9.1 m. Answer: 13.47 x 10⁹ V.equations
Learn more about equations here,
https://brainly.com/question/29174899
#SPJ11
lamp and a 30 Q lamp are connected in series with a 10 V battery. Calculate the following: the power dissipated by the 20 02 lamp ] A 20 lamp and a 30 02 lamp are connected in series with a 10 V battery. Calculate the following: the power dissipated by the 30 Q lamp
The power dissipated by the 20 ohm lamp is 0.5556 W and the power dissipated by the 30 ohm lamp is 0.8333 W.
Two lamps having resistances of 20 ohm and 30 ohm are connected in series with a 10V battery. The current in the circuit is given by:I = V/R (series circuit)Resistance of the circuit, R = R₁ + R₂I = 10/(20 + 30)I = 0.1667ANow, using Ohm's Law:Power dissipated by the 20 ohm lamp:P = I²R = (0.1667)² × 20P = 0.5556WattsPower dissipated by the 30 ohm lamp:P = I²R = (0.1667)² × 30P = 0.8333WattsTherefore, the power dissipated by the 20 ohm lamp is 0.5556 W and the power dissipated by the 30 ohm lamp is 0.8333 W.
Learn more about Circuit here,
https://brainly.com/question/33229972
#SPJ11
Write the given numbers in scientific notation with the appropriate number of significant figures: a) 3256 (3 significant figures) b) 85300000 (4 significant figures) c) 0.00003215 (3 significant figure) d) 0.0005247 (2 significant figures) e) 825000 (3 significant figures)
Scientific notation is used to write very large or very small numbers in a simpler format. The general form of the scientific notation is a × 10n, where a is a number with a single non-zero digit before the decimal point, and n is an integer. The power of 10 is equal to the number of spaces the decimal point has been moved to create a non-zero digit after the first digit of the original number.
For example, the number 1,234,000 can be written in scientific notation as 1.234 × 106.a) 3256 (3 significant figures)In 3256, there are 3 significant figures. The number will be written in scientific notation by moving the decimal point to the left so that only one non-zero digit remains to the left of the decimal point.3.26 × 10³b) 85300000 (4 significant figures)In 85300000, there are 4 significant figures. The number will be written in scientific notation by moving the decimal point to the left so that only one non-zero digit remains to the left of the decimal point.8.530 × 10⁷c) 0.00003215 (3 significant figures)In 0.00003215, there are 3 significant figures. The number will be written in scientific notation by moving the decimal point to the right so that only one non-zero digit remains to the left of the decimal point.3.22 × 10⁻⁵d) 0.0005247 (2 significant figures)In 0.0005247, there are 2 significant figures. The number will be written in scientific notation by moving the decimal point to the right so that only one non-zero digit remains to the left of the decimal point.5.2 × 10⁻⁴e) 825000 (3 significant figures)In 825000, there are 3 significant figures. The number will be written in scientific notation by moving the decimal point to the left so that only one non-zero digit remains to the left of the decimal point.8.25 × 10⁵.
To know more about Scientific notation visit:
https://brainly.com/question/31059440
#SPJ11
A 2.00-nF capacitor with an initial charge of 5.81 μC is discharged through a 1.50-km resistor. dQ (a) Calculate the current in the resistor 9.00 us after the resistor is connected across the terminals of the capacitor. (Let the positive direction of the current be define such that > 0.) dt mA (b) What charge remains on the capacitor after 8.00 µs? μC (c) What is the (magnitude of the) maximum current in the resistor?
(a) The current in the resistor 9.00 µs after it is connected across the capacitor is 472 mA. (b) The charge remaining on the capacitor after 8.00 µs is 1.35 μC. (c) The magnitude of the maximum current in the resistor is 1.94 A.
(a) To calculate the current in the resistor 9.00 µs after it is connected across the terminals of the capacitor, we can use the equation for the discharge of a capacitor through a resistor:
I(t) = I0 * exp(-t / RC)
where I(t) is the current at time t, I0 is the initial current (equal to the initial charge divided by the initial time constant), t is the time, R is the resistance, and C is the capacitance.
Given:
C = 2.00 nF = 2.00 * 10^(-9) F
Q0 = 5.81 μC = 5.81 * 10^(-6) C
R = 1.50 km = 1.50 * 10^(3) Ω
First, we need to calculate the initial time constant (τ) using the formula: τ = RC.
τ = (1.50 * 10^(3) Ω) * (2.00 * 10^(-9) F) = 3.00 * 10^(-6) s
Then, we can calculate the initial current (I0): I0 = Q0 / τ = (5.81 * 10^(-6) C) / (3.00 * 10^(-6) s) = 1.94 A
Finally, plugging in the values, we can calculate the current at 9.00 µs (9.00 * 10^(-6) s):
I(9.00 * 10^(-6) s) = (1.94 A) * exp(-(9.00 * 10^(-6) s) / (3.00 * 10^(-6) s)) ≈ 0.472 A ≈ 472 mA
Therefore, the current in the resistor 9.00 µs after it is connected across the terminals of the capacitor is approximately 472 mA.
(b) To calculate the charge remaining on the capacitor after 8.00 µs, we can use the equation:
Q(t) = Q0 * exp(-t / RC)
Plugging in the values:
Q(8.00 * 10^(-6) s) = (5.81 * 10^(-6) C) * exp(-(8.00 * 10^(-6) s) / (3.00 * 10^(-6) s)) ≈ 1.35 μC ≈ 1.35 * 10^(-6) C
Therefore, the charge remaining on the capacitor after 8.00 µs is approximately 1.35 μC.
(c) The magnitude of the maximum current in the resistor occurs at the beginning of the discharge process when the capacitor is fully charged. The maximum current (Imax) can be calculated using Ohm's Law:
Imax = V0 / R
where V0 is the initial voltage across the capacitor.
The initial voltage (V0) can be calculated using the formula: V0 = Q0 / C = (5.81 * 10^(-6) C) / (2.00 * 10^(-9) F) = 2.91 * 10^(3) V
Plugging in the values:
Imax = (2.91 * 10^(3) V) / (1.50 * 10^(3) Ω) = 1.94 A
Therefore, the magnitude of the maximum current in the resistor is approximately 1.94 A.
To know more about capacitor click here:
https://brainly.com/question/31627158
#SPJ11
In a photoelectric effect experiment, if the frequency of the photons are held the same while the intensity of the photons are increased, the work function decreases. the maximum kinetic energy of the photoelectrons decreases. the stopping potential remains the same. the maximum current remains the same.
when the frequency of the photons is held constant while the intensity is increased, the work function and stopping potential remain unchanged, while the maximum kinetic energy of the photoelectrons remains the same, resulting in a higher photocurrent due to the increased number of emitted electrons.
In a photoelectric effect experiment, the interaction between photons and a metal surface leads to the ejection of electrons. The observed phenomena are influenced by the frequency and intensity of the incident photons, as well as the properties of the metal, such as the work function.When the frequency of the photons is held constant but the intensity is increased, it means that more photons per unit time are incident on the metal surface. In this case, the number of photoelectrons emitted per unit time increases, resulting in a higher photocurrent. However, the maximum kinetic energy of the photoelectrons remains the same because it is determined solely by the frequency of the photons.
The work function of a metal is the minimum amount of energy required to remove an electron from its surface. It is a characteristic property of the metal and is unaffected by the intensity of the incident light. Therefore, as the intensity is increased, the work function remains the same. The stopping potential is the minimum potential required to stop the flow of photoelectrons. It depends on the maximum kinetic energy of the photoelectrons, which remains constant as the frequency of the photons is held constant. Hence, the stopping potential also remains the same.
Learn more about photoelectric effect here:
https://brainly.com/question/9260704
#SPJ11
What is the max. speed with which q 1200 kg ear can round a turn of radius 90.0m in a flat road The coefficient of friction between fires and road is 0.6s? Is this result independout of the mass of the can?
The maximum speed of the car is 32,944 m/s, which is independent of the mass of the car, as long as the mass of the car remains constant and the coefficient of friction remains the same.
The maximum speed of a car with a mass of 1200 kg rounding a turn of radius 90 m in a flat road can be calculated using the following formula:
v = [tex]\sqrt{(r * a)[/tex]
where v is the maximum speed, r is the radius of the turn, and a is the acceleration of the car.
First, we need to find the acceleration of the car:
a = [tex]v^2[/tex] / r
a = ([tex]\sqrt{(r^2 * 90^2) * 230[/tex]) / r
a = 26,000 m/[tex]s^2[/tex]
Next, we can use the mass of the car to find the force acting on the car:
F = ma
F = 1200 kg * 26,000 m/[tex]s^2[/tex]
= 3,120,000 N
Finally, we can use the formula for centripetal acceleration to find the maximum speed of the car:
[tex]a_c[/tex] = [tex]v^2[/tex] / r
[tex]a_c[/tex] = ([tex]\sqrt{(r^2 * 90^2) * 230^2[/tex]) / [tex]r^2[/tex]
[tex]a_c[/tex] = 1,810,200 m/[tex]s^2[/tex]
So the maximum speed of the car is:
v = [tex]\sqrt{(r * a_c)[/tex]
= [tex]\sqrt\\90^2 * 1,810,200 m/s^2)[/tex]
= 32,944 m/s
Therefore, the maximum speed of the car is 32,944 m/s.
This result is independent of the mass of the car, as long as the mass of the car remains constant and the coefficient of friction remains the same.
Learn more about speed
https://brainly.com/question/13943409
#SPJ11
Magnitude: \( \quad|\mathbf{E}|= \) \begin{tabular}{|l|l|} \hline Direction & 0 in the positive \( x \) direction in the positive \( y \) direction in the negative \( y \) direction in the negative \(
We cannot find the magnitude of the electric field at the given point.
The given figure shows the direction of electric field vectors of a point charge.A point charge of +2.5 μC is placed at the origin of the coordinate system. The magnitude of electric field at a point located at x=3.0 m, y= 4.0 m is to be determined.Magnitude:|E|= Electric field at the given point will be the vector sum of electric field produced by the point charge and the electric field due to other charges present in the space.|E|= |E₁ + E₂ + E₃ + ......|E₁ = Electric field produced by the given point charge at the given point.|E₁| = kQ/r²= (9 × 10⁹ Nm²/C²) × (2.5 × 10⁻⁶ C) / (5²)= 1.125 × 10⁴ N/C.
The direction of the electric field produced by the given point charge is shown in the figure.The other electric field lines shown in the figure are due to other charges present in the space. As we do not have any information about these charges, we cannot calculate the direction of the net electric field at the given point. Therefore, we cannot find the magnitude of the electric field at the given point.
Learn more about electric field here,
https://brainly.com/question/19878202
#SPJ11
The complete question "Magnitude: \( \quad|\mathbf{E}|= \) \begin{tabular}{|l|l|} \hline Direction & 0 in the positive \( x \) direction in the positive \( y \) direction in the negative \( y \) direction in the negative \( "
a magnitude of 15.3 N/C (in the positive z direction), what is the y component of the magnetic field in the region? Tries 2/10 Previous Tries 1b. What is the z component of the magnetic field in the region?
(a) The y-component of the magnetic field (By) in the region is 0.00 T.
(b) The z-component of the magnetic field (Bz) is 0.00 T.
What is the y and z component of the magnetic field?(a) The y component of the magnetic field in the region is calculated as;
By = (m · ax) / (q · vz)
where;
m is the mass of the electronax is the acceleration in the x-directionq is the charge of the electron vz is the velocity component in the z-directionThe given parameters;
ax = 0 (since there is no acceleration in the x-direction)
q = charge of an electron = -1.6 x 10⁻¹⁹ C
vz = 1.3 x 10^4 m/s
By = (m x 0) / (-1.6 x 10⁻¹⁹ x 1.3 x 10⁴)
By = 0
(b) The z-component of the magnetic field (Bz) is calculated as;
Bz = (m · ay) / (q · vx)
where;
ay is the acceleration in the y-direction vx is the velocity component in the x-directionThe given parameters;
ay = 0 (since there is no acceleration in the y-direction)
Bz = (m x 0) / (-1.6 x 10⁻¹⁹ x 1.3 x 10⁴)
Bz = 0
Learn more about magnetic field here: https://brainly.com/question/7802337
#SPJ4
The complete question is below:
An electron has a velocity of 1.3 x 10⁴ m/s, (in the positive x direction) and an acceleration 1.83 x 10¹² m/s² (in the positive z direction) in uniform electric field and magnetic field. if the electric field has a magnitude of 15.3 N/C (in the positive z direction),
a. what is the y component of the magnetic field in the region?
b. What is the z component of the magnetic field in the region?
Which of the following is not a unit of mass? A) gram B) kilogram C) milligram D) Newton
The unit of mass is not Newton (D). The correct answer is D) Newton.
The Newton (N) is a unit of force, not mass. It is named after Sir Isaac Newton and is used to measure the amount of force required to accelerate a mass. The gram (g), kilogram (kg), and milligram (mg) are all units of mass. The gram is a metric unit commonly used for small masses, the kilogram is the base unit of mass in the International System of Units (SI), and the milligram is a smaller unit equal to one-thousandth of a gram. In physics, mass is a fundamental property of matter and is measured in units such as grams and kilograms. The Newton, on the other hand, is a unit of force that represents the force required to accelerate a one-kilogram mass by one meter per second squared according to Newton's second law of motion.
Learn more about force here:
https://brainly.com/question/30507236
#SPJ11
What is the maximum number of lines per centimeter a diffraction grating can have and produce a complete first-order spectrum for visible light? Assume that the visible spectrum extends from 380 nm to 750 nm.
The maximum number of lines per centimeter a diffraction grating can have and produce a complete first-order spectrum for visible light is given by:
D = sinθ / (m * λ), Where: D is the line density in lines per millimeter θ is the diffraction angle m is the order of diffraction λ is the wavelength of light
The relationship between the number of lines per millimeter and the number of lines per centimeter is given by:
L = 10,000 * D, where L is the line density in lines per centimeter.
The complete first-order spectrum for visible light extends from 380 nm to 750 nm. So, the average wavelength can be calculated as:
(380 + 750)/2 = 565 nm
Let's take m = 1. This is the first-order spectrum. Using the above formula, we can write
D = sinθ / (m * λ)D = sinθ / (1 * 565 * 10^-9)
D = sinθ / 5.65 * 10^-7
Now, we need to find the maximum value of D such that the first-order spectrum for visible light is produced for this diffraction grating. This occurs when the highest visible wavelength, which is 750 nm, produces a diffraction angle of 90°.
Thus, we can write: 750 nm = D * sin90° / (1 * 10^-7)750 * 10^-9 = D * 1 / 10^-7D = 75 lines per millimeter
Thus, the maximum number of lines per centimeter a diffraction grating can have and produce a complete first-order spectrum for visible light is:L = 10,000 * D = 750,000 lines per centimeter.
Explore another question on diffraction grating here: https://brainly.com/question/13104464
#SPJ11
Three resistors are connected in parallel across a supply of unknown voltage. Resistor 1 is 7R5 and takes a current of 4 A. Resistor 2 is 10R and Resistor 3 is of unknown value but takes a current of 10 A. Calculate: (a) The supply voltage. (b) The current through Resistor (c) The value of Resistor 3.
Answer:
a) The supply voltage is 30 volts.
b)The current through Resistor 2 is 3 amperes.
c) The value of Resistor 3 is 3 ohms.
To solve the given problem, we can use the rules for parallel resistors:
(a) The supply voltage can be calculated by considering the voltage across each resistor. Since the resistors are connected in parallel, the voltage across all three resistors is the same. We can use Ohm's Law to find the voltage:
V = I1 * R1 = 4 A * 7.5 Ω = 30 V
(b) To find the current through Resistor 2, we can use Ohm's Law again:
I2 = V / R2 = 30 V / 10 Ω = 3 A
(c) To find the value of Resistor 3, we need to calculate the resistance using Ohm's Law:
R3 = V / I3 = 30 V / 10 A = 3 Ω
To know more about Ohm's Law
https://brainly.com/question/1247379
#SPJ11
Draw ray diagram of an object placed outside the center of curvature of a concave mirror, and comment over the image formation (3 marks)
When an object is placed outside the center of curvature of a concave mirror, the ray diagram can be drawn to determine the image formation.
When an object is placed outside the center of curvature of a concave mirror, the image formation can be understood by drawing a ray diagram. To draw the ray diagram, follow these steps:
1. Draw the principal axis: Draw a straight line perpendicular to the mirror's surface, which passes through its center of curvature.
2. Place the object: Draw an arrow or an object outside the center of curvature, on the same side as the incident rays.
3. Incident ray: Draw a straight line from the top of the object parallel to the principal axis, towards the mirror.
4. Reflection: From the point where the incident ray hits the mirror, draw a line towards the focal point of the mirror.
5. Draw the reflected ray: Draw a line from the focal point to the mirror, which is then reflected in a way that it passes through the point of incidence.
6. Locate the image: Extend the reflected ray behind the mirror, and where it intersects with the extended incident ray, mark the image point.
7. The resulting image will be formed between the center of curvature and the focal point of the mirror. It will be inverted, real, and diminished in size compared to the object.
Learn more about focal point here:
https://brainly.com/question/32157159
#SPJ11
White dwarf supernovae (also known as Type la supernovae) are the result of the catastrophic explosion of white dwarf stars. They are also considered "standard candles." (i) What property makes a class of objects "standard candles"? (ii) How can Cepheid variable stars be used in a similar way?
Cepheid variable stars can be used in a similar way as standard candles because they also have a relationship between their period of variability and intrinsic brightness that allows for distance measurement to remote galaxies.
(i) The class of objects which have the same intrinsic brightness and whose observed brightness depends only on the distance between the object and the observer are known as “standard candles”. These objects are used to determine distances to remote galaxies.(ii) Cepheid variable stars can be used in a similar way as standard candles because they are a type of variable star that exhibits regular changes in brightness over a period of time.
Cepheids' intrinsic brightness is correlated with the period of their variability, and this relationship can be used to determine distances to remote galaxies.When Cepheid variable stars are plotted on a period-luminosity diagram, a linear relationship is obtained. The period of a Cepheid variable star is the time taken to complete one cycle of variation in brightness, and luminosity is related to the absolute magnitude of the star.
By measuring the period of a Cepheid variable star, its absolute magnitude can be determined, and hence, its distance from Earth can be calculated.In conclusion, standard candles are a class of objects that have the same intrinsic brightness, and Cepheid variable stars can be used in a similar way as standard candles because they also have a relationship between their period of variability and intrinsic brightness that allows for distance measurement to remote galaxies.
Learn more about intrinsic brightness
https://brainly.com/question/32536123
#SPJ11
A passenger on a moving train walks at a speed of 1.90 m/s due north relative to the train. The passenger's speed with respect to the ground is 4.5 m/s at an angle of 33.0° west of north. What are the magnitude and direction of the velocity of the train relative to the ground? magnitude m/s direction ° west of north
The magnitude and direction of Vt are 1.83 m/s due north. Thus, the velocity of the train relative to the ground is 1.83 m/s due north.
A passenger on a moving train walks at a speed of 1.90 m/s due north relative to the train. The passenger's speed with respect to the ground is 4.5 m/s at an angle of 33.0° west of north. To find the magnitude and direction of the velocity of the train relative to the ground, we need to use the vector addition technique. Let's denote the velocity of the passenger relative to the train as Vp and the velocity of the train relative to the ground as Vt. Then we have the following equations:Vp = 1.90 m/s due northVpg = 4.5 m/s at an angle of 33.0° west of northThe velocity of the passenger relative to the ground is the vector sum of Vp and Vt.
Therefore,Vpg = Vp + VtWe can resolve Vpg into its north and west components as follows:Vpg,n = Vpg cos θ = 4.5 cos 33.0° = 3.73 m/s due northVpg,w = Vpg sin θ = 4.5 sin 33.0° = 2.36 m/s west of northSince Vp is directed due north, the north component of Vpg must be due to Vt. Therefore, Vt,n = Vpg,n - Vp = 3.73 - 1.90 = 1.83 m/s due north. The west component of Vt is zero because there is no westward component in Vpg. Hence, the magnitude and direction of Vt are 1.83 m/s due north. Thus, the velocity of the train relative to the ground is 1.83 m/s due north.
Learn more about Equation here,
https://brainly.com/question/29174899
#SPJ11
A Bourden pressure gauge having a linear calibration which has a 50 mm long pointer. It moves over a circular dial having an arc of 270. It displays a pressure range of 0 to 15 bar. Determine the sensitivity of the Bourden gauge in terms of scale length per bar (i.e. mm/bar)
Therefore, the sensitivity of the Bourden gauge in terms of scale length per bar (i.e., mm/bar) is 1.6 mm/bar.
The sensitivity of a bourdon gauge in terms of scale length per bar is the rate of change of the bourdon gauge's reading for a unit change in the applied pressure. The formula to calculate the sensitivity of bourdon gauge is:Sensitivity = Total length of scale / Pressure range Sensitivity = (270/360) × π × D / PWhere D = diameter of the dial and P = Pressure rangeThe diameter of the circular dial can be calculated as follows:D = Length of pointer + Length of pivot + 2 × OverrunD = 50 + 10 + 2 × 5D = 70 mmThe pressure range of the gauge is given as 0 to 15 bar. Thus, P = 15 bar.Substituting these values in the above formula, we get: Sensitivity = (270/360) × π × 70 / 15Sensitivity = 1.6 mm/bar. Therefore, the sensitivity of the Bourden gauge in terms of scale length per bar (i.e., mm/bar) is 1.6 mm/bar.
To know more about pressure gauge visit:
https://brainly.com/question/31540347
#SPJ11
Two blocks made of different materials, connected by a thin cord, slide down a plane ramp inclined at an angle θθ to the horizontal, (Figure 1). The masses of the blocks are mAmA = mBmB = 7.9 kgkg , and the coefficients of friction are μAμAmu_A = 0.15 and μBμBmu_B = 0.37, the angle θθ = 32∘
Find the friction force impeding its motion
Therefore, the friction force impeding its motion is approximately 20.49 N.
We have a system of two masses connected by a string that is sliding down an inclined plane. The angle of inclination of the plane is θθ. Both the blocks have the same mass (mA=mB=7.9 kg) and different coefficients of friction. The coefficient of friction of block A is μA=0.15 and the coefficient of friction of block B is μB=0.37. We need to find the friction force impeding its motion.
Let's take the direction of motion as the positive x-axis. Let F be the force acting on the system in the direction of motion and fA and fB be the forces of friction on block A and B respectively. Also, let the acceleration of the system be a. By applying Newton's second law to the system,
we haveF - fA - fB = (mA + mB)a.........(1)Since both blocks have the same mass, their frictional forces will also be equal. Hence, fA = μA(mA + mB)ga......(2)fB = μB(mA + mB)ga.......(3)Substituting equations (2) and (3) in equation (1), we haveF - (μA + μB)(mA + mB)ga = (mA + mB)aSimplifying the above equation, we getF = (mA + mB)g(μB - μA)sinθ= (7.9 + 7.9) x 9.8 x (0.37 - 0.15) x sin 32°≈ 20.49 N
Therefore, the friction force impeding its motion is approximately 20.49 N.
to know more about motion
https://brainly.com/question/28204681
#SPJ11
The friction force impeding its motion is 25.01 N.
Given data Mass of block A, mA = 7.9 kg Mass of block B, mB = 7.9 kg Coefficient of friction of block A, μA = 0.15Coefficient of friction of block B, μB = 0.37
Angle of the incline, θ = 32 degrees As there are two blocks, it will have two friction forces; one for each block. Hence,Friction force of block A, FA = μA
Normal force on block A, NA = mA g cos θ
Normal force on block A, NB = mB g cos θ Friction force of block B, FB = μB
Normal force on block B, NB = mB g cos θWe know,mg sin θ = ma + mgsinθ = mAa(1)mg sin θ = mb + mgsinθ = mBa(2) The acceleration will be the same for both blocks, hence: a=gsinθ−μcosθgcosθ+μsinθ=9.8sin32−0.15cos32gcos32+0.15sin32=1.89m/s2
Friction force of block A will be:NA = mA g cos θNA = 7.9 * 9.8 * cos(32)NA = 67.6 NFA = μA * NAFB = μB * NBNB = mB g cos θNB = 7.9 * 9.8 * cos(32)NB = 67.6 NFB = μB * NB
The friction force impeding its motion is 25.01 N. The expression is shown below:FB = μB * NBFB = 0.37 * 67.6FB = 25.01 N
Thus, the friction force impeding its motion is 25.01 N.
Know more about friction here,
https://brainly.com/question/28356847
#SPJ11
Einstein's relation between the displacement Δx of a Brownian particle and the observed time interval Δt. (2) Einstein-Stokes equation for the diffusion coefficient. Explain the derivation process of each of all of them. In the answer emphasize what is the hypothesis (or assumption) and what is the result..
Einstein's relation states that the mean squared displacement of a Brownian particle is proportional to time.
The displacement Δx of a Brownian particle and the observed time interval Δt can be related by Einstein's relation, which states that the mean squared displacement is proportional to time: ⟨Δx²⟩ = 2Dt, where D is the diffusion coefficient.The derivation process of Einstein's relation:Assuming a particle undergoes random motion in a fluid, the equation of motion for the particle can be written as:F = maHere, F is the frictional force and a is the acceleration of the particle.
Since the acceleration of a Brownian particle is random, the mean value of a is zero. The frictional force, F, can be assumed to be proportional to the particle's velocity: F = -ζv, where ζ is the friction coefficient.Using the above equations, the equation of motion can be rewritten as:mv = -ζv + ξ, where ξ is the random force acting on the particle.The average of this equation of motion gives:⟨mv⟩ = -⟨ζv⟩ + ⟨ξ⟩
The left-hand side of this equation is zero, since the average velocity of the particle is zero. The average of the product of two random variables is zero. Therefore, the second term on the right-hand side of this equation is also zero. Thus, we have:0 = -⟨ζv⟩.
The frictional force can be related to the diffusion coefficient using the Einstein-Stokes equation: D = kBT/ζHere, kBT is the thermal energy, and ζ is the friction coefficient.The result of the above equation is:Δx² = 2DtTherefore, Einstein's relation states that the mean squared displacement of a Brownian particle is proportional to time.
Learn more about Brownian particle here:
https://brainly.com/question/15540555
#SPJ11
6. An airplane heads from Calgary, Alberta to Sante Fe, New Mexico at [S 28.0° E] with an airspeed of 662 km/hr (relative to the air). The wind at the altitude of the plane is 77.5 km/hr [S 75 W) relative to the ground. Use a trigonometric approach to answer the following. (4 marks) a. What is the resultant velocity of the plane, relative to the ground (groundspeed)?
The resultant velocity of the plane, relative to the ground (groundspeed) is approximately 315.82 km/hr which is calculated using a trigonometric approach.
To find the groundspeed of the plane, we need to calculate the resultant velocity by considering the vector addition of the plane's airspeed and the wind velocity.
First, we decompose the airspeed into its components. The southward component of the airspeed can be found by multiplying the airspeed (662 km/hr) by the sine of the angle between the direction of the airspeed and the south direction ([tex]28.0^0[/tex]). This gives us a southward airspeed component of approximately 309.81 km/hr.
Next, we decompose the wind velocity into its components. The westward component of the wind velocity is obtained by multiplying the wind velocity (77.5 km/hr) by the cosine of the angle between the wind direction and the east direction ([tex]180^0 - 75^0 = 105^0[/tex]). This gives us a westward wind component of approximately 31.59 km/hr.
Now, we can find the resultant velocity by adding the components. The groundspeed is the magnitude of the resultant velocity and can be calculated using the Pythagorean theorem. The groundspeed is approximately 315.82 km/hr.
To summarize, the resultant velocity of the plane, relative to the ground, is approximately 315.82 km/hr. This is obtained by considering the vector addition of the plane's airspeed and the wind velocity.
Learn more about velocity here:
https://brainly.com/question/30559316
#SPJ11
1-ph transformer, 50Hz, core type transformer has square core of 24 cm side. The flux density is 1 Wb/m². If the iron factor is 0.95, the approximately induced voltage per turn is a) 6 b) 11 12 d) none of the above. 2-A transformer has full-load iron loss of 500 W. the iron loss at half-load will be a) 125 W b) 250 W 500 W d) none of the above. 3-A transformer will have maximum efficiency at ----------. a) full-load b) no-load c) 90% load none of the above 4-The hysteresis loss in a certain transformer is 40W and the eddy current loss is 50 W (both at 30Hz), then the iron loss at 50 Hz is ----. The flux density being the same. a) 180W 204W c) 302 none of the previous. 5-The voltage per turn of the high voltage winding of a transformer is per turn of the low voltage winding. the voltage a) More than b) the same as c) less than d) none of the previous B- 1- The low voltage winding is wound under the high voltage winding. Why.
1) The approximately induced voltage per turn is (b) 11.
2) The iron loss at half-load will be (a) 125 W.
3) The transformer will have maximum efficiency at (c) 90% load.
4) The iron loss at 50 Hz is (c) 302 W.
5) The voltage per turn of the high voltage winding of a transformer is (c) less than the voltage per turn of the low voltage winding.
B) The low voltage winding is wound under the high voltage winding to ensure better insulation and protection. Placing the low voltage winding at the bottom reduces the risk of high voltage breakdown and improves safety.
1) The formula for calculating the induced voltage per turn in a transformer is given by V = 4.44 fΦBN, where:
- V is the induced voltage per turn
- f is the supply frequency (50 Hz in this case)
- Φ is the flux density (in Wb/m²)
- B is the area of the square core (in m²)
- N is the number of turns of the transformer
Given:
- f = 50 Hz
- Φ = 1 Wb/m²
- B = 24 cm = 0.24 m (assuming it is the side of the square core)
- Iron factor = 0.95
First, calculate the area of the square core:
B = (side of square)² = (0.24 m)² = 0.0576 m²
Next, calculate the induced voltage per turn using the formula:
V = 4.44 * 50 * 1 * 0.0576 = 12.2 V (approximately)
Since the iron factor is 0.95, the actual induced voltage per turn will be:
V' = 0.95 * V = 0.95 * 12.2 = 11.59 V (approximately)
Therefore, the approximately induced voltage per turn is 11.59 V.
2) The iron loss of a transformer is proportional to the square of the flux and hence it depends on the square of the applied voltage. Therefore, the iron loss at half-load will be less than the full-load. Let's calculate the iron loss at half load:
Given:
Iron loss at full load = 500 W
Let the iron loss at half load be P. Therefore:
Iron loss at half load / Iron loss at full load = (Voltage at half load / Voltage at full load)²
P / 500 = (0.5 / 1)²
P / 500 = 0.25
P = 0.25 * 500 = 125 W
Hence, the iron loss at half-load is 125 W.
3) The efficiency of a transformer is given by the ratio of output power to input power:
η = output power / input power
For a transformer, output power = V2I2 and input power = V1I1.
The efficiency can be written as:
η = V2I2 / V1I1 = (V2 / V1) * (I2 / I1)
Now, we know that the voltage regulation of a transformer is given by:
Voltage regulation = (V1 - V2) / V2 = (V1 / V2) - 1
So, V1 / V2 = 1 / (1 - voltage regulation)
It can be observed that when voltage regulation is zero, efficiency is maximum. Hence, a transformer will have maximum efficiency at full load.
Therefore, the maximum efficiency of a transformer is achieved at full load.
4) Hysteresis loss in a transformer is given by the formula:
Ph = ηBmax^1.6fVt
Where:
Ph is the hysteresis loss
η is the Steinmetz hysteresis coefficient (a function of the magnetic properties of the material)
Bmax is the maximum flux density
f is the supply frequency
Vt is the volume of the core
In this case, we are given the iron loss at 50 Hz, which is equal to 500 W. Let's calculate the hysteresis loss at 50 Hz:
Given:
Iron loss at
50 Hz = P = 500 W
Since the flux density is the same, the hysteresis loss and eddy current loss are independent of frequency.
Therefore, the total iron loss at 50 Hz is the sum of hysteresis loss and eddy current loss:
Total iron loss at 50 Hz = hysteresis loss + eddy current loss = 500 W
Hence, the total iron loss at 50 Hz is 500 W.
5) The voltage per turn of a transformer is given by V / N, where V is the voltage and N is the number of turns. The voltage ratio of a transformer is given by the ratio of the number of turns of the high voltage winding to the number of turns of the low voltage winding.
Since the voltage ratio is defined as the high voltage divided by the low voltage, the voltage per turn of the high voltage winding is greater than the voltage per turn of the low voltage winding.
Therefore, the voltage per turn of the high voltage winding is greater than the voltage per turn of the low voltage winding.
To know more about transformer click here:
https://brainly.com/question/15200241
#SPJ11
The complete question is:
1-ph transformer, 50Hz, core type transformer has square core of 24 cm side. The flux density is 1 Wb/m². If the iron factor is 0.95, the approximately induced voltage per turn is a) 6 b) 11 12 d) none of the above. 2-A transformer has full-load iron loss of 500 W. the iron loss at half-load will be a) 125 W b) 250 W 500 W d) none of the above. 3-A transformer will have maximum efficiency at ----------. a) full-load b) no-load c) 90% load none of the above 4-The hysteresis loss in a certain transformer is 40W and the eddy current loss is 50 W (both at 30Hz), then the iron loss at 50 Hz is ----. The flux density being the same. a) 180W 204W c) 302 none of the previous d)500W. 5-The voltage per turn of the high voltage winding of a transformer is per turn of the low voltage winding. the voltage a) More than b) the same as c) less than d) none of the previous e) the low voltage winding. B- 1- The low voltage winding is wound under the high voltage
A transformer is used to step down 160 V from a wall socket to 9.1 V for a radio. (a) If the primary winding has 600 turns, how many turns does the secondary winding have?_____ turns (b) If the radio operates at a current of 480 mA, what is the current (in mA) through the primary winding? ____mA
(a) If the primary winding has 600 turns, how many turns does the secondary winding have? 34 turns (b) If the radio operates at a current of 480 mA, what is the current (in mA) through the primary winding? 27.2 mA.
(a) Given that the primary winding has 600 turns and the voltage across the primary winding is 160 V, and the voltage across the secondary winding is 9.1 V, we can calculate the number of turns in the secondary winding (N2) as follows: Picture is given below.
Therefore, the secondary winding has approximately 34 turns.
(b)To find the current through the primary winding, we can use the current ratio equation:
[tex]\frac{I1}{I2}[/tex] = [tex]\frac{N2}{N1}[/tex]
where I1 and I2 re the currents through the primary and secondary windings respectively, and N1 and N2are the number of turns in the primary and secondary windings respectively.
Given that the current through the secondary winding (I2) is 480 mA, and the number of turns in the primary winding (N1) is 600, we can calculate the current through the primary winding (I1) as follows: Picture is given below.
Therefore, the current through the primary winding is approximately 27.2 mA.
To know more baout primary winding
https://brainly.com/question/28335926
#SPJ11
A projectile is fired with an initial velocity of 46.82m/s at an angle of 41.89°. It hits a target 1.09s later. How high (vertically) is the target?
Notes: Remember, a = g. Don't forget the units!
A projectile is fired with an initial velocity of 46.82m/s at an angle of 41.89°. It hits a target 1.09s later. The target is approximately 56.26 meters below the initial launch height.
To determine the vertical height of the target, we can analyze the projectile's motion and apply the equations of motion.
Let's break down the initial velocity into its vertical and horizontal components. The vertical component (Vy) can be found using the equation:
Vy = V × sin(θ)
where V is the initial velocity (46.82 m/s) and θ is the launch angle (41.89°). Plugging in the values:
Vy = 46.82 m/s × sin(41.89°)
≈ 29.70 m/s
Next, we can determine the time it takes for the projectile to reach its maximum height (t_max). At the highest point of the projectile's trajectory, the vertical velocity becomes zero. We can use the equation:
Vy = Vy_initial + g × t_max
where g is the acceleration due to gravity (approximately 9.8 m/s^2). Plugging in the values:
0 = 29.70 m/s - 9.8 m/s^2 × t_max
Solving for t_max:
t_max = 29.70 m/s / 9.8 m/s^2
≈ 3.03 s
Since the total time of flight is given as 1.09 s, we can calculate the time it takes for the projectile to descend from its maximum height to hit the target:
t_descent = total time of flight - t_max
= 1.09 s - 3.03 s
≈ -1.94 s
The negative sign indicates that the projectile has already descended from its maximum height when it hits the target.
Now, let's find the vertical distance traveled during the descent. We can use the equation:
Δy = Vy_initial × t_descent + (1/2) × g × t_descent^2
Plugging in the values:
Δy = 29.70 m/s × (-1.94 s) + (1/2) × 9.8 m/s^2 × (-1.94 s)^2
≈ -56.26 m
The negative sign indicates that the target is located below the initial launch height. To find the actual vertical height of the target, we take the absolute value of Δy:
Vertical height of the target = |Δy|
≈ 56.26 m
Therefore, the target is approximately 56.26 meters below the initial launch height.
To learn more about projectile's motion visit: https://brainly.com/question/24216590
#SPJ11