START
What is the
mass of 2.75
moles of CO₂?

Answer:

First, we need to find the number of moles of H2 present in 6.4 L at STP (Standard Temperature and Pressure), which is 0°C and 1 atm pressure. At STP, one mole of any gas occupies 22.4 L of volume.

So, the number of moles of H2 present in 6.4 L at STP is:

6.4 L H2 x (1 mol H2/22.4 L H2) = 0.286 mol H2

From the balanced chemical equation, we know that 2 moles of H2 produce 2 moles of H2O.

So, 0.286 mol H2 will produce (2/2) x 0.286 = 0.286 mol H2O.

Finally, we can use the molar mass of water (18.015 g/mol) to find the mass of water produced:

0.286 mol H2O x 18.015 g/mol = 5.16 g H2O

Therefore, the mass of water produced from 6.4 L H2 at STP is 5.16 g.

The percent yield of K3PO3 is 75.54%. The percent yield of K3PO3 is 75.54% and 7.20 g of NO can be produced.

Find the percent yield of all three questions?

1. The balanced equation is 3 KOH + H3PO4 => K3PO3 + 3 H2O. The molar mass of KOH is 56.11 g/mol and the molar mass of K3PO3 is 212.27 g/mol. The stoichiometric ratio between KOH and K3PO3 is 3:1.

The theoretical yield of K3PO3 can be calculated as follows:

2.45 g KOH × (1 mol KOH / 56.11 g) × (1 mol K3PO3 / 3 mol KOH) × (212.27 g K3PO3 / 1 mol K3PO3) = 4.66 g K3PO3

The percent yield of K3PO3 can be calculated as follows:

(actual yield / theoretical yield) × 100% = (3.52 g / 4.66 g) × 100% = 75.54%

Therefore, the percent yield of K3PO3 is 75.54%.

2. The balanced equation is C2H6O + 3 O2 => 2 CO2 + 3 H2O. The molar mass of O2 is 32.00 g/mol and the molar mass of CO2 is 44.01 g/mol. The stoichiometric ratio between O2 and CO2 is 3:2.

The theoretical CO2 yield can be calculated as follows:

14.23 g O2 × (1 mol O2 / 32.00 g) × (2 mol CO2 / 3 mol O2) × (44.01 g CO2 / 1 mol CO2) = 13.31 g CO2

The percent yield of CO2 can be calculated as follows:

(actual yield / theoretical yield) × 100% = (8.25 g / 13.31 g) × 100% = 61.92%

Therefore, the percent yield of CO2 is 61.92%.

3. The balanced equation is 4 NH3 + 5 O2 => 4 NO + 6 H2O. The molar mass of NH3 is 17.03 g/mol and the molar mass of NO is 30.01 g/mol. The stoichiometric ratio between NH3 and NO is 4:4 or 1:1.

First, we need to determine the limiting reagent between NH3 and O2.

4.25 g NH3 × (1 mol NH3 / 17.03 g) = 0.250 mol NH3

4.25 g O2 × (1 mol O2 / 32.00 g) = 0.133 mol O2

The limiting reagent is O2 because it produces fewer moles of NO compared to NH3.

The theoretical yield of NO can be calculated as follows:

0.133 mol O2 × (4 mol NO / 5 mol O2) × (30.01 g NO / 1 mol NO) = 7.20 g NO

Therefore, 7.20 g of NO can be produced.

To learn more about percent yield, visit: https://brainly.com/question/11963853

#SPJ1

Looking at the solubility curve above for KClO3, at 30 degrees Celsius 37grams will dissolve to make a saturated solution.

Saturated and unsaturated solutions: what are they?

A saturated solution is one that has as much of the solute present as is capable of dissolving. A solution is said to be unsaturated if it doesn't contain all of the solute that can disperse in it.

A depiction of solubility (measured in g/100 g water) versus temperature (measured in °C) is known as a solubility curve. On the same graph, solubility curves for various substances are frequently depicted, allowing for easy comparisons. The curved line on the graph that depicts the connection between temperature and a substance's solubility at various temperatures is known as the solubility curve.

To learn more about solubility curve use:

https://brainly.com/question/14366471

#SPJ1

NaCl is least soluble in 100. g of water at 50C.

It forms a hydroxyl group with water molecules, but non-polar other hydrocarbons with equivalent molecular weights do not.As a result, alcohol dissolves better in water.

Because of the formation of a weak acid or aluminum salt as a result of the reaction between aluminum phosphate and acid, aluminum phosphate is more accessible in acid than water.Acids can so dissociate aluminum phosphate more effectively than water.

To know more about soluble visit:

https://brainly.com/question/29857840

#SPJ1

According to the illustration, the factors that influence the gravitational attraction between two objects would be mass and distance. Option A.

The gravitational attraction between two objects is determined by two factors: their masses and the distance between them.

This is due to the inverse square law, which states that the force between two objects is proportional to the inverse square of the distance between them.

Therefore, the correct answer is mass and distance.

More on gravitational attraction can be found here: https://brainly.com/question/29009418

#SPJ1

Answer:it is A

Explanation:

The bond energy of each carbon-oxygen double bond in carbon dioxide is 188 kJ/mol.

What is Bond Energy?

Bond energy, also known as bond dissociation energy, is the amount of energy required to break a chemical bond between two atoms in a molecule or compound. It is defined as the energy released or absorbed when a chemical bond is formed or broken.

The bond energy of each carbon-oxygen double bond in carbon dioxide can be determined by using the total bond energy of the products and the bond energies of the other bonds involved in the reaction.

The reaction for the formation of carbon dioxide from carbon and oxygen is:

C(s) + O2(g) → CO2(g)

The total bond energy of the products (CO2) in the reaction is given as 1256 kJ. The bond energy of the carbon-oxygen double bond (C=O) in carbon dioxide can be determined by subtracting the bond energies of the other bonds involved in the reaction from the total bond energy of the products.

First, we need to determine the bond energies of the other bonds involved in the reaction. The bond energy of the carbon-carbon triple bond (C≡C) in molecular nitrogen is 946 kJ/mol, and the bond energy of the oxygen-oxygen double bond (O=O) in molecular oxygen is 498 kJ/mol.

The balanced equation tells us that one mole of CO2 is formed from one mole of C(s) and one mole of O2(g). Therefore, the total bond energy of the products in the reaction can be expressed as:

Total bond energy = (Bond energy of C=O bond) + (Bond energy of C≡C bond) + (Bond energy of O=O bond)

1256 kJ/mol = (Bond energy of C=O bond) + 946 kJ/mol + 498 kJ/mol

Solving for the bond energy of the carbon-oxygen double bond (C=O) in carbon dioxide:

Bond energy of C=O bond = Total bond energy - Bond energies of other bonds

Bond energy of C=O bond = 1256 kJ/mol - 946 kJ/mol - 498 kJ/mol

Bond energy of C=O bond = 188 kJ/mol

Therefore, the bond energy of each carbon-oxygen double bond in carbon dioxide is 188 kJ/mol.

Learn more about Bond Energy from given link

https://brainly.com/question/14867588

#SPJ1

The formation of two new compounds that may or may not be accompanied by color change and precipitation is a sign of a double replacement reaction.

In a double replacement reaction, two reactants exchange ions to create two new products with the same kind of chemical bonds. Typically, a precipitate is formed by one of the products. Double displacement reactions take the form:

AB + CD → AD + CB

Double replacement reactions can involve reactants with ionic or covalent bonds, but ionic molecules are more frequently involved in the kind of reaction. Double replacement reactions can involve bases and acids. The solvent is often water.

The reaction between silver nitrate and sodium chloride in water serves as an illustration of a double replacement reaction. Ionic substances include sodium chloride and silver nitrate. In aqueous solution, both reactants disperse into their ions. The sodium ion takes up the nitrate anion to make sodium nitrate, whereas the silver ion picks up the sodium's chloride ion to form silver chloride. Both of the products are ionic compounds, just like the reactants. Due to its limited solubility in water, silver chloride precipitates from solution.

To know more about solubility, visit;

https://brainly.com/question/22185953

#SPJ1

Global winds are produced when high pressure polar air moves to replace rising low pressure equatorial air.

What do you mean by global wind?

Large-scale atmospheric circulation patterns that cover the entire planet are referred to as global winds. The uneven heating of the Earth's surface by the sun, which results in temperature differences and pressure gradients, is what causes these winds. Ocean currents are influenced by global winds, which also move heat and moisture throughout the planet and affect weather and climate patterns.

The trade winds, the dominant westerlies, and the polar easterlies are the three main wind belts that make up the global wind system. In the tropics, the predominant westerlies move from west to east, but in the mid-latitudes, the trade winds move from east to west. Near the poles, polar easterlies wind from east to west.

The correct option is:

c) When high pressure polar air moves to replace rising low pressure equatorial air.

The uneven heating of the Earth's surface by the sun, which results in temperature disparities and pressure gradients, is what causes global winds. Low pressure occurs close to the equator and high pressure occurs close to the poles as a result of warm air rising at the equator and cold air sinking at the poles.

Global winds are caused by air flowing from high-pressure to low-pressure regions. In this instance, the global wind system is created when high pressure polar air travels towards the equator to replace rising low pressure equatorial air.

Learn more about global wind click here:

https://brainly.com/question/7922057

#SPJ1

Answer: it feels good, because that person cares about you

Explanation:

1. Supersaturated : B cannot hold more solute.

2. Saturated: C Has more solute than it can hold.

3. Agitation: E. Stirring (to dissolve faster).

4. Unsaturated : A can hold more solute.

5. Solute : F smallest part of a solution.

6. Solvent: D larger amount present.

For more information on saturation of solution kindly visit to

https://brainly.com/question/1851822

#SPJ9

The Haber process is a complex industrial process, and several factors must be taken into consideration when determining the optimum temperature.

What is Harber process?

Ammonia (NH3) is created chemically by the Haber process from nitrogen gas (N2) and hydrogen gas (H2). The technique was created in the early 20th century by a German chemist by the name of Fritz Haber, hence the name.

With the aid of a catalyst, usually iron, the Haber process involves the reaction of nitrogen gas and hydrogen gas at high pressure and high temperature. The reaction's chemical equation is as follows:

                   N2 + 3H2 ⇌ 2NH3

In the Haber process, the creation of ammonia (NH3) is an exothermic reaction. Le Chatelier's principle states that an exothermic reaction is more advantageous at lower temperatures. In order to maximise the ammonia yield, one might therefore infer that the Haber process should be carried out at low temperatures.

But because the Haber process is a sophisticated industrial procedure, choosing the ideal temperature requires careful thought of a number of variables. While a low temperature may promote the forward reaction, it may also cause the reaction to proceed more slowly, resulting in less ammonia being produced. The pressure and concentration of the reactants also have an impact on reaction rate.

The Haber process has been successfully used at temperatures between 400 and 450°C, based on the catalyst employed. Due to the low temperature favouring the forward reaction, the reaction rate is high enough at this temperature to achieve an acceptable ammonia production rate while also allowing for a good yield of ammonia. Moreover, the inclusion of a catalyst (often iron) can speed up the reaction even more and boost ammonia output.

In conclusion, even if the forward reaction in the Haber process may be favoured by a low temperature, this does not mean that this temperature is the best one because other variables that affect the reaction rate and production rate may also be at play. By testing, it has been discovered that a catalyst and a temperature of roughly 400–450°C offer the greatest ammonia yield and reaction rate balance.

Learn more about Haber process click here:

https://brainly.com/question/21867752

#SPJ1

IO2 is C. Iodine dioxide.

Iodine dioxide can be defined  as a chemical compound that is made up of of an  atom of iodine and two atoms of oxygen.

The prefix di- indicates that there are two atoms of oxygen in the compound, and since the oxidation state of iodine in the compound is +4, it is named iodine dioxide.

It is a yellowish-brown solid at room temperature and is used as an oxidizing agent in various chemical reactions.

Therefore the correct option is C.

Learn more about Iodine dioxide here:https://brainly.com/question/14831042

#SPJ1

78.3 grams of magnesium chloride are produced when 20.0 g of magnesium reacts with excess hydrochloric acid.

The balanced chemical equation for the reaction between magnesium and hydrochloric acid is:

Mg + 2HCl → MgCl2 + H2

From the equation, we can see that one mole of magnesium reacts with two moles of hydrochloric acid to produce one mole of magnesium chloride and one mole of hydrogen gas.

To find the amount of magnesium chloride produced when 20.0 g of magnesium reacts, we first need to convert the mass of magnesium to moles. The molar mass of magnesium is 24.31 g/mol, so:

moles of Mg = 20.0 g / 24.31 g/mol = 0.823 moles of Mg

According to the stoichiometry of the balanced equation, 1 mole of magnesium produces 1 mole of magnesium chloride, so the moles of magnesium chloride produced will also be 0.823 moles.

Finally, we can convert the moles of magnesium chloride to grams using the molar mass of magnesium chloride, which is 95.21 g/mol:

mass of MgCl2 = 0.823 moles × 95.21 g/mol = 78.3 g

When 20.0 g of magnesium reacts with excess hydrochloric acid, 78.3 g of magnesium chloride is formed. The reaction's balanced chemical equation is:

Mg + 2HCl → MgCl2 + H2

So, 20.0 g of Mg reacts with 1.65 moles of HCl to produce 78.3 g of MgCl2 and H2 gas.

For more question on hydrochloric acid click on

https://brainly.com/question/31074787

#SPJ11

The numerical represented by X IN THE GENERAL formulaa for a hydrate ,salt XH2O is water of crystallization

Give an illustration of what water of crystallization is.

The water of crystallization refers to the amount of water molecules that make up one salt formula unit. The presence of water molecules can be seen, for instance, in hydrated copper sulfate (CuSO4.5H 2 O). As a result, this hydrated species contains the water that causes precipitation. A dot separates the primary formula from the water of crystallization, as you can see.

The quantity of water molecules present as crystallization water is indicated by the letter X in the general expression, XH2O. X molecules of water serve as the precipitation water in each molecule of the hydrated salt, according to this.

To learn more about hydrated salt use :

https://brainly.com/question/27298158

#SPJ1

Answer:

Oil and water: mixture/heterogeneous

Explanation:

1. Oil and water: mixture/heterogeneous

Oil and water do not mix to a uniform consistency throughout

2. Copper wire: element

3. Chalk: compound

4. Sugar and water: mixture/homogeneous

Sugar and water mix perfectly and create a solution.

5. Water: compound

6. Salt and water: mixture/homogeneous

Salt and water also create a solution (saline)

7. Aluminum foil: element

8. Air in a balloon: mixture/homogeneous if random air or element if filled with specific gas like helium

9. Nitrogen: element

10. Pizza: mixture/heterogeneous

Each substance on the pizza can be readily identified and seperated

Answer: The Kinetic Molecular Theory (KMT)

Explanation:

Ex-situ conservation is a type of conservation that includes bioremediation. It is a "therapy that turns toxic compounds into less toxic or non-toxic ones using naturally occurring organisms."

Bioremediation is the biological detoxification or degradation of pollutants found in soil, wastewater, or industrial sludge. Although this process can involve microorganisms (bacteria, fungi, etc.), plant-assisted bioremediation is more commonly known as phytoremediation.

Introduction/principles. Ex-situ bioremediation is a biological procedure in which processed excavated soil is placed in a lined above-ground treatment area and aerated to improve the native microbial population's ability to degrade organic pollutants.

To learn more about bioremediation visit:

brainly.com/question/14353375

#SPJ1

Answer:

There are primarily two forms of bonding that an atom can participate in: Covalent and Ionic. Covalent bonding involves the sharing of electrons between two or more atoms. Ionic bonds form when two or more ions come together and are held together by charge differences.

Explanation:

While they are not precisely the same, they are closely connected since surface tension results from the cohesive force. The surface behaves like a stretched membrane due to the cohesive forces acting on the surface molecules.

Definition of cohesion and “surface tension -

1. Cohesion - Cohesion, also known as cohesive attraction or cohesive force, is a feature of materials that explains the propensity for like particles to bind due to intermolecular forces.

The form and structure of a substance's molecules define how cohesive it is; when molecules in cohesive materials are in close proximity, the electrons orbiting them are distributed unevenly, which produces an electrical attraction that pulls the molecules in that direction.

2. Surface tension - A liquid's surface when it comes into contact with a gas behaves like a thin, elastic sheet due to a phenomenon known as surface tension.

Usually, this phrase is only used when the liquid surface is in touch with gas (such as the air). "Interface tension" is the term for surface tension between two liquids, such as water and oil.

To know more about cohesion and surface tension -

brainly.com/question/17300198

The term mole concept is used here to determine the number of moles of oxygen. The number of moles of oxygen obtained is 18.063 moles.

One mole of a substance is defined as that quantity of it which contains as many entities as there are atoms exactly in 12 g of carbon - 12. The formula used to calculate the number of moles is:

Number of moles = Given mass / Molar mass

The molar mass of Oxygen molecule = 31.9 g/mol

The given mass of Oxygen molecule = 576.22 g

Number of moles = 576.22 g / 31.9 g/mol = 18.063 moles

Thus the number of moles of oxygen molecule is 18.063 moles.

To know more about moles, visit;

https://brainly.com/question/30307377

#SPJ1

the amount of gas present does not change when the pressure is applied to it It gets bigger.

These are typical examples of how temperatures can alter the volume of a confined gas while keeping the pressure constant:The volume increases as the temperature rises and decreases as the temperature drops.

A gas's molecules move more swiftly when it is heated because they are given more energy.More pressure and greater collisions are the direct result for the container's walls.Yet, cooling the particles will make them move more slowly and lower pressure.Try this to play about with the relationships a little.

To know more about pressure visit:

https://brainly.com/question/29341536

#SPJ1

Explanation:

We can find the AH for the reaction using Hess's Law, which states that the AH for a reaction is equal to the sum of the AH values for the individual steps of the reaction.

Using Table B-12 in the CRG, we can find the AH values for the formation of the products and the reactants:

AHf(CaCl₂) = -795.8 kJ/mol

AHf(HCl) = -92.3 kJ/mol

AHf(Ca(OH)₂) = -986.1 kJ/mol

AHf(H₂O) = -285.8 kJ/mol

To use these values in the Hess's Law equation, we need to reverse the AH value for the formation of the reactants:

AHf(Ca(OH)₂) -> Ca(OH)₂(s) + H₂O(1) AH = +986.1 kJ/mol

Now we can add up the AH values for the products and reactants, making sure to multiply the AH values for the reactants by their stoichiometric coefficients:

2AHf(HCl) + AHf(Ca(OH)₂) - AHf(CaCl₂) - 2AHf(H₂O)

= 2(-92.3 kJ/mol) + 986.1 kJ/mol - (-795.8 kJ/mol) - 2(-285.8 kJ/mol)

= -184.6 kJ/mol + 986.1 kJ/mol + 795.8 kJ/mol + 571.6 kJ/mol

= +2,169.9 kJ/mol

Therefore, the AH for the reaction is +2,169.9 kJ/mol.

Answer: O AH,0 = +125.7 kJ. (Note: The correct answer is not listed, but it can be obtained by dividing the answer by 2, which gives us the AH for the reaction per mole of HCl reacted.)

Answer:

the mass is 10

Explanation:

30 divided by 3

Answer: mass is 10

Explanation:

F=30N M=? A=3m/s^2

M= 30N / 3m/s^2

in other words 30 divided by 3

Two elements in the same group on the periodic table of the elements are most similar in their number of protons.

What is electrons ?

The negatively charged atom's electrons are responsible for this. An atom's total negative charge, which is produced by all of its electrons, counteracts the positive charge of the protons in the atomic nucleus.

What is element?

The atoms make the element. The atoms are created up of the element; it is a pure substance it can't be able to split up. The element is created up of a single kind of atom. Atoms are the main thing for the creation of elements. Elements are classified according to their performance and physical properties.  

Therefore, Two elements in the same group on the periodic table of the elements are most similar in their number of protons.

Learn more about electron from the given link.

https://brainly.com/question/13998346

#SPJ1

If you continue to put one drop of water on one side of the paper towel, we observe that water keep on moving in the whole towel as per the capillary action.

What is capillary action?

Capillary action is the process of a liquid flowing in a narrow space without the assistance of, or even in opposition to, any external forces like gravity.

Examples of capillary action.

Tears flowing through tear ducts

water rising in a straw or glass tube defying gravity

water passing through a cloth towel

Therefore, If you continue to put one drop of water on one side of the paper towel, we observe that water keep on moving in the whole towel as per the capillary action.

Learn more about capillary action, here:

https://brainly.com/question/13228277

#SPJ1

Answer: I would love to help but i cant see the table

Explanation:

Jana can modify her device by increasing the amount of zinc and decreasing the amount of copper sulfate to generate more heat, which will increase the water temperature within the desired range of 70°C to 100°C.

How could Jana modify her design to meet the temperature constraints?

By making these modifications, Jana can increase the water temperature to the desired range and ensure that her device is portable, safe, and effective.

To know more about water temperature follow this link:

https://brainly.com/question/27988898

#SPJ1

0.1 moles HCl - 0.05 moles HCl = 0.05 moles HCl

Let's assume that you added 0.1 moles of HCl to each flask and that the amount of the unknown carbonate and NaOH used in each flask is the same. Let's also assume that the limiting reagent for each reaction is the unknown carbonate.

Balanced chemical equation for the reaction between the carbonate and HCl:

M2CO3 + 2HCl → 2MCl + CO2 + H2O

The limiting reagent is the unknown carbonate because it is present in a lower quantity than the HCl.

The number of moles of the limiting reagent that reacted is equal to the number of moles of HCl added, which is 0.1 moles.

The number of moles of the limiting reagent remaining is equal to the initial number of moles of the limiting reagent minus the number of moles of the limiting reagent that reacted. Since we do not know the initial number of moles of the unknown carbonate, we cannot calculate this value.

The stoichiometry of the balanced chemical equation tells us that 2 moles of HCl react with 1 mole of M2CO3. Therefore, the number of moles of HCl that reacted with the unknown carbonate is:

0.1 moles HCl x (1 mole M2CO3 / 2 moles HCl) = 0.05 moles M2CO3

Learn more about carbonate here:

https://brainly.com/question/22908760

#SPJ4

Question:

Calculate the moles of HCl remaining in each flask after the reaction with the unknown carbonate, One is the reaction between M2CO3 and HCl .The second reaction is between NaOH and HCl .They are given below . M2CO3(aq) + 2HC

Answer: 47 p+, 107 n, 48 e–

Explanation:

The list appears to be a chronological order of famous scientists and chemists. Here's the order from earliest to latest:

Generally, Robert Boyle (1627-1691): Irish chemist and physicist, known as the founder of modern chemistry.

Hennig Brand (c. 1630 – c. 1710): German alchemist and the discoverer of phosphorus.

Marie Curie (1867-1934): Polish-born physicist and chemist, famous for her pioneering research on radioactivity and the first woman to win a Nobel Prize.

John Newlands (1837-1898): English chemist who developed the concept of the periodic table of elements.

J.J Thomson (1856-1940): English physicist who discovered the electron and isotopes.

Lothar Meyer (1830-1895): German chemist who independently developed the concept of the periodic table around the same time as Dmitri Mendeleev.

Read more about scientists

https://brainly.com/question/12965344

#SPJ1

Answer: 240 would be the correct answer (a)

Explanation: so there are 80 calories per serving and you consume 3 servings you would consume 240, so 3x80=240