Some lipid rafts are characterized by an accumulation of cholesterol. What does this mean for the fluidity of the lipid raft?.

Answers

Answer 1

The lipid rafts are less fluid than the surrounding membrane at normal temperatures.

Cholesterol decreases the fluidity of the membrane at normal temperatures.

Lipid rafts regulate neurotransmission, receptor traffickinging and influence membrane fluidity.

For example, in phospholipid layer in cell membrane, there are hydrophilic heads (polar part of the layer) and hydrophobic tails (nonpolar part of the layer).

1) Small, non-polar molecules diffuse easily through this layer, no energy is required, this is passive transport.

2) Polar molecules cannot diffuse through phospholipid layer using passive transport, because hydrophobic tails does not allow that (polar molecules are reppeled), energy is required for that, this is active transport.

More about cholesterol: brainly.com/question/841110

#SPJ4


Related Questions

A histogram is a chart that shows the spread of data, that allows us to
see outliers and
O a. Errors
O b. Symbols
O c. Wrong answers
Od. Best number

Answers

A histogram is a chart that shows the spread of data, which allows us to see outliers and the best number that fits with the data (Option D).

What is a histogram?

A histogram is a diagram used to show the relationships between two different variables, which is represented by rectangles that indicate a specified amount of a given parameter in the representation.

In conclusion, a histogram is a chart that shows the spread of data, which allows us to see outliers and the best number that fits with the data (Option D).

Learn more about histogram features here:

https://brainly.com/question/24347517

#SPJ1

Identify the approximate bond angles for the following molecules h2s sf2 chcl3 cf4

Answers

The approximate bond angles for the given molecules are as follows:

The bond angle of h2s is 92.1°.

The bond angle of SF2  is 98º.

The bond angle of ChCl3 is 109.5º.

The bond angle of Cf4 is 109.5º.

In an molecule, the angle formed between orbitals which contains bonding electrons pairs around the central atom is known as bond angle.

The geometry of a molecule or a compound depends on the bond angles.  It is always expressed in degrees.

For example, if a compound has an angle of 180°, it would have linear shape like in the case of CO2. It has a bong angle of 180° and its shape is linear.

If you need to learn more about bong angles, click here

https://brainly.com/question/6179102?referrer=searchResults

#SPJ4

question 7 briefly explain why the two pi-bonds of an alkyne triple bond are required to be oriented perpendicular to one another.

Answers

Pi bonds, on the other hand, are ties between p-orbitals on nearby atoms. The two pi bonds in an alkyne are also perpendicular since the p-orbitals are by definition parallel to one another.

What is the name of a triple bond?

Alkynes are defined as molecules with a triple bond between two carbon atoms. One bond and two bonds combine to form the triple bond.

What is the formula for alkynes?

Alkynes are hydrocarbons that have triple bonds between carbon atoms. When it comes to molecules with one triple bond, their usual formula is CnH2n-2 (and no rings).

How are alkynes created?Alkynes are aliphatic hydrocarbons that are acyclic (branched or unbranched) and have one triple bond between carbon atoms, giving them the typical chemical formula CnH2n-2 [18]. Triple bonds are shorter and more powerful than double bonds, continuing the trend.

learn more about alkyne here

https://brainly.com/question/22933069

#SPJ4

in example 4.2, you found that a particular mixture of co and h2 could produce 407 g ch3oh. co(g) 2 h2(g) n ch3oh(l) if only 332 g of ch3oh is actually produced, what is the percent yield of the compound?

Answers

The percent yield is given by the division of the actual yield and theoretical yield. The percent yield methanol (CH₃OH) compound is calculated to be 81.57%.

What is the percent yield?

The percent yield is the reaction yield that is estimated by the actual and the theoretical yield that is never greater than 100% and has been the ratio of the actual to the theoretical yield multiplied by 100.

The percent yield is given as:

Percent yield =  actual yield ÷  theoretical yield × 100%

Given,

Theoretical yield = 407 gram

Actual yield = 332 grams

Substituting values as:

Percent yield = 332 ÷ 407 × 100%

= 81.57 %

Therefore, the percent yield is 81.57%.

Learn more about percent yield, here:

https://brainly.com/question/2506978

#SPJ4

Explain how fossil fuels are formed from living organisms on land and in the sea.

Answers

Answer:

Depending on the ambient conditions, oil or natural gas develops. Today’s sources of fossil fuels are between 15 and 600 million years old. During this period the continental plates shifted, transforming oceans into landmasses, with the result that mineral deposits can be found both on land and at sea.

Explanation:

1. What is given off by a nucleus undergoing each of the following types of decay? (draw each of the
particles as an isotopic (nuclear) symbol)

A. Alpha

B. Beta

C. Gamma

Answers

The following is given out by the particles undergoing these types of decay;

A. Alpha - Helium nucleus 4/2He

B. Beta  - An electron 0/-1 e

C. Gamma - A gamma ray 0/0 γ

What is a radioactive decay?

We know that the term radioactivity is the term that we often use to describe the spontaneous disintegration of the atoms of a substance which often leads to the formation of a new substances an the release of energy. The process by which the radioactive atoms are broken down is what we call the process of radioactive decay.

Now we know that radioactive decay is a very important process and was developed largely due to the research of the scientist that is called Maria Curie.

The following is given out by the particles undergoing these types of decay;

A. Alpha - Helium nucleus 4/2He

B. Beta  - An electron 0/-1 e

C. Gamma - A gamma ray 0/0 γ

Learn more about radioactive decay:https://brainly.com/question/1770619

#SPJ1

Which of the following describes our modern model of the atom? (1 pt)
*
1 point
solid sphere like a marble but unique to the element it makes
numerous positive charges floating around in a sea of negative charge (plum pudding)
positive nucleus surrounded by a blob of negative charge
positive nucleus surrounded by electrons in circular orbits
positive nucleus surrounded by electron orbitals with complex 3-D shapes and assigned energies.

Answers

Modern model of the atom states that an atom is made up of a core nucleus around which protons, neutrons, and electrons are in highly probable orbits.

What is an atom?

The fundamental unit of chemistry is the atom. It is the smallest particle that can be separated into matter without releasing electrically charged particles.

Additionally, it is the smallest piece of matter with the characteristics of a chemical element.

Thus,  Modern model of the atom states that an atom is made up of a core nucleus around which protons, neutrons, and electrons are in highly probable orbits.

To learn more about atom, refer to the below link:

https://brainly.com/question/13518322

# SPJ1

pls explain how u do it aswell ty

Answers

[tex]2CO + O_{2} ---- > 2CO_{2}\\2Na + 2H_{2} O---- > 2NaOH + H_{2} \\2P + 3Cl_{2} ------ > 2PCl_3} \\Pb_{3} O_{4} +HNO_{3} ------ > 2Pb(NO3)_{2} + H_{2} O + PbO_{2}[/tex]

What is a reaction equation?

A reaction equation is a representation of the reaction that takes place in the reaction vessel. We know that a reaction equation is balanced when the number of atoms of each of the elements is the same on both sides of the reaction equation.

We can achieve the balancing of the reaction equations by the process of an atom count. We try to find out if we have the same number of atoms on both sides of the reaction equation by carrying out a literal counting of the atoms.

Let us now attempt to write the balanced reaction equation in each case;

[tex]2CO + O_{2} ---- > 2CO_{2}\\2Na + 2H_{2} O---- > 2NaOH + H_{2} \\2P + 3Cl_{2} ------ > 2PCl_3} \\Pb_{3} O_{4} +HNO_{3} ------ > 2Pb(NO3)_{2} + H_{2} O + PbO_{2}[/tex]

Learn more about reaction equation:https://brainly.com/question/3588292

#SPJ1

Which image shows a foliated metamorphic rock?

light colored rock with fine grains and metallic luster.

Smooth green rock.

dark color rock with coarse grains in parallel layers.

Answers

Answer:

C

Explanation:

The answer is in the image.

--------------------------------------------------

Walk in faith and trust in God!

a cylinder of o2(g) used in breathing by emphysema patients has a volume of 7.00 l at a pressure of 16.0 atm. if the temperature of the cylinder is 32.8°c, what mass (in g) of oxygen is in the cylinder?

Answers

Mass of oxygen in cylinder is 142.2 g

The equation of state for a hypothetical ideal gas is known as the ideal gas law, sometimes known as the generic gas equation. It is a good estimate of how many gases behave under various circumstances.PV = nRT

Given,

Volume: 7.00 l

Pressure: 16 atm

temperature: 32.8⁰c = 32.8+273.15 = 305.95K

Mass of oxygen in cylinder = ?

By Ideal gas law,

PV = nRT

PV = (mass/molar mass) RT

molar mass: 32g/mol

R = 0.0826

so,

16 × 7 = (mass/32) × 0.0826 × 305.95

Mass = 142.2g

therefore oxygen present inside the cylinder is 142.2 g in mass.

Learn more about ideal gas law here:

https://brainly.com/question/25290815

#SPJ4

a mixture of 0.0333 g of hydrogen and 0.0165 mol of oxygen in a closed container is sparked to initiate a reaction. how many grams of water can form?

Answers

If a mixture of 0.0333 g of hydrogen and 0.0165 mol of oxygen in a closed container is sparked to initiate a reaction. 0.2976 grams of water will be formed.

If the hydrogen reacted has a mass of 0.0333 g. then

Molar mass = m / n

2.016 g/mol = 0.0333 g / n

n = 0.01651785714 mol [tex]H_{2}[/tex]

According to the actual reaction to make water:

[tex]2H_{2} +O_{2} = 2H_{2}O[/tex]

To produce two molecules of water ([tex]H_{2}O[/tex]), two molecules of diatomic hydrogen ([tex]H_{2}[/tex]) must be combined with one molecule of diatomic oxygen ([tex]O_{2}[/tex]) and energy will be released in the process. And to complete the process, one from the reactant side must be in equilibrium with the other or in excess.

If the number of moles of 0.0333 g of [tex]H_{2}[/tex] is 0.0165, then it only needs 0.00826 mol of [tex]O_{2}[/tex] to form 0.0165 mol of water. (oxygen is in excess)

[tex]n_{H_{2} } : n_{O_{2} } :n_{H_{2}O } =[/tex] 2 : 1 : 2

= 0.0165 : 0.00826 : 0.0165

If the water produced is 0.0165 mol, then its mass is:

Molar mass = m / n

18.01528 g/mol = m / 0.01651785714 mol

m = 0.2975738214 g

m = 0.2976 g

To learn more about getting the mass and moles in a balanced equation: https://brainly.com/question/13914584

#SPJ4

When mercury oxide is heated, it decomposes into mercury and oxygen. If 28. 4 g of mercury oxide decomposes, producing 2. 0 g of oxygen, what is the percent by mass of mercury in mercury oxide?.

Answers

The percent by mass of mercury in mercuric oxide is

93 %.

The molecular formula of mercuric oxide is HgO. Mercury is liquid at room temperature and readily combines with oxygen to form mercuric oxide. Mercury is represented by the symbol Hg. The mass percent is defined as the ratio of the mass of the reactant to the mass of the product into 100. When mercuric oxide undergoes decomposition, it gives mercury and oxygen. And this reaction is endothermic.

The balanced equation for the reaction of mercury oxide is,

[tex]2HgO (s)→ 2Hg (l) + O _{2}(g)[/tex]

Mass of mercury oxide = 28.4 g

Mass of the oxygen = 2 g

The percent by mass of mercury in mercury oxide is,

[tex]Mass ℅= \frac{Mass \: of \: Mercury }{Mass \: of \: Mercury \: oxide} \times 100[/tex]

[tex]= \frac{28.4 - 2}{28.4} \times 100[/tex]

= 93 %

Therefore, the percent by mass of mercury in mercury oxide is 93 %.

To know more about percent by mass, refer to the below link:

https://brainly.com/question/14990953

#SPJ4

If the mass of an object stays the same, but its volume increases, the density of the object will
A: decrease
B: increase
C: stay the same
D: get heavier

Answers

B the density of the object will increase

Answer:b

Explanation: Edge 22

waters density is ___ the cooking oil and mercury

Answers

Answer:

ANSWER :: (DENSITY OF OIL IS --0.8/CM²) .

(DENSITY OF MERCURY IS --- 13.69/CM²) .


Write down the reaction you think will occur after you immerse the egg in the vinegar. Come back in an hour, and record
your observations.

Answers

When immerse the egg in the vinegar then we see 'bubbles on the shell'

Here given data is when we immerse the egg in the vinegar then soak this egg shell in vinegar and in that chemical reaction will start because in vinegar acetic acid are seen and that dissolve calcium carbonate shell and  the acetic acid reacts with the calcium carbonate in the egg shell and releases carbon dioxide gas that you see as bubbles on the shell after an hour we will back then egg shell are soaked by vinegar

Know more about egg reaction

https://brainly.com/question/7867377

#SPJ1

Based on what you know now, do you think the channel on Mars was formed by flowing water or flowing lava?

Answers

In my opinion, the channel on Mars was formed by flowing lava because the presence of water is not possible in the intense environment of Mars.

How the channel on Mars was formed?

A channel on Mars wasn't done by liquid water but it was built by molten lava according to the study of surface features on Mars. We know that water quantity is very low on the planet Mars so there is very little chance of making of these channels due to flowing of water but we can say that the channels are produced by flowing of lave because there are large number of mountain regions on Mars which erupts lava when the Mars was formed. So there is a strong evidence for the formation of channels on the Mars due to flowing lave.

So we can conclude that In my opinion, the channel on Mars was formed by flowing lava because the presence of water is not possible in the intense environment of Mars.

Learn more about Mars here: https://brainly.com/question/644043

#SPJ1

if you were going to be handling harmful chemicals in a lab, what safety equipment would you use to protect your eyes and face?(1 point)

Answers

Chemical splash goggles or face shields should be worn when there is a risk of splashing hazardous materials or flying particles.

What are safety equipment would you use to protect eyes and face ?

Put on this protective gear before dealing with hazardous chemicals in a lab to protect your face and eyes.

If a substance has the ability to damage a surface upon touch, it is corrosive. People who inhale the fumes from these substances run the risk of burning their eyes, skin, and internal organs.

These chemical burns can be avoided by closely following the biosafety protocol that a laboratory requires the use of masks, goggles, gloves, and an apron or lab coat.

The regulations for biosafety in a lab necessitate that the subject not possess the exposed skin and eyes.

Learn more about Lab safety here:

https://brainly.com/question/8430576

#SPJ4

What are the numbers on the right side of an element?

Answers

Answer:

It's the atomic weight for that particular element, atomic weight is just the number of protons in the element

Explanation:

okay have a good day!

deduce the correct order of the following elements in order of decreasing atomic radius: cl, n, na and f.

Answers

Correct order of the following elements in order of decreasing atomic radius are as follow N>F>Na>Cl

Atomic radius is the distance from atoms nucleus to the outer edge of the electron cloud. atomic radius decreases across a period and increases down the group across a period effective nuclear charge increases  as electron shielding remain constant. In this order nitrogen and Florine  are arranged in period from left to right and also sodium and chlorine are arranged in period from left to right. we move from left to right in a period atomic radius decreases.

Know more about atomic radius.

https://brainly.com/question/28463342

#SPJ4

please help me figure out how many significant figures are in there

Answers

Answer:

A) 4 and 3

Explanation:

You don't count the scientific notations in his problem sine they are only trailing zeros which they don't count as sig figs so look at the original numbers. Remember that zeros after decimal points or in-between natural numbers count with that said 2.020 has 4 sig figs and 5.00 has 3 sig figs

The reactions involved in producing larger compounds from smaller compounds is called.

Answers

The reactions involved in producing larger compounds from smaller compounds is called anabolism.

It is a biochemical process in which simple compounds join to form larger and complex compounds. This is why it is considered a building-up aspect of metabolism.

Anabolism does not initialize on its own because it is non-spontaneous. It requires energy in initializing. Anabolism is vital for the cell as its development, growth, and maintenance depend on it. Cells also use the anabolic process to make and repair tissues.

For example, the Formation of disaccharides and water by combining sugars, and the reaction of glycerol with fatty acids to form lipids.

If you need to learn more about anabolism reactions, click here

https://brainly.com/question/16793262?referrer=searchResults

#SPJ4

A solid precipitate is formed from the reaction of lead nitrate and sodium chromate.

Answers

Lead chromate (PbCrO4) is the solid precipitate formed from the reaction of lead nitrate and sodium chromate.

A precipitate is a compound that comes out of a liquid solution and it insoluble. The chemical substance which causes the formation of solid to form is called the precipitant. Lead chromate (PbCrO4) is as hard as a brick.

The chemical equation of the reaction is:

            Pb (NO3)2 + NA2CrO4 → Pb (CrO4) + 2Na (NO3)

This reaction is known as Double Displacement or Metathesis. Lead chromate emerges as a solid precipitate with a yellow color.

If you need to learn more about precipitates, click here

https://brainly.in/question/4206316?referrer=searchResults

#SPJ4

Dilution of a buffer solution with a small amount of water will ________ the ph of the solution.

Answers

I think the answer would be

Dilution of a buffer solution with a small amount of water will not change the ph of the solution.

Hope this helps

There will be no change in the pH of buffer solution because the pH of a buffer will be constant always. And it makes the solution in a certain pH.

What is buffer?

A buffer solution is the solution with constant pH used t maintain the pH of a solution in a certain value. There are both basic and acidic buffers. Basic buffer is made by mixing a weak base with its salt and it maintains the basic pH.

An acidic buffer is made by mixing a weak acid with its salt and used to maintain the acidic pH. Buffer solution will not change in pH on addition of water or acid or any base.

On each dilution the buffer will make the added concentration of acid and base in equal. Like if we added water the release H+ ion will be consumed by the basic buffer and maintain the pH.

Hence, upon dilution by water, the pH of buffer solution does not change.

To find more about buffer, refer the link:

https://brainly.com/question/22821585

#SPJ5

boosting electrocatalytic oxygen evolution by synergistically coupling layered double hydroxide with mxene

Answers

Mxene as electro catalyst also have shown productive outcomes and stable performances due to their prominent electrical conductivity and hydrophilic surface.

Mxene are a class of two dimensional inorganic compound called mxene. because of its origin from the process of etching and exfoliating. automatically thin layers of aluminum from layered carbides. oxygen evolution reaction (OER) is cornerstone reaction of many renewable energy technologies. Cost-effective yet efficient electro catalysts are critical to overcome the high overpotential and sluggish kinetics of this process new type of non-precious metal electro catalyst for OER by synergistically coupling layered double hydroxides (LDH) with two-dimensional (2D) mxene with high conductivity and active surface.

Know more about electro catalytic oxygen evolution by synergistically coupling layered double hydroxide with mxene

https://brainly.com/question/28463319

#SPJ4

Describe Emotions in the room after “The Vote!” during July 2, 1776 U.S History

Answers

Answer:

On July 4, 1776—the day the Declaration of Independence was approved by the Second Continental Congress—the prevailing mood was trepidation and fear.

Explanation:

True or false: One reason people needed calendars in the past was to know when it was time to plant and harvest crops.!

Answers

Answer:

True

Explanation:

the time you plant crops matters alot. especially in times before pesticides and greenhouses.

Answer: False

Explanation:

People went by what the seasons were to find out what to grow. Calendars merely helped with remembering important dates like when is Halloween, when is president's day, etc..

. which type of bond exemplifies a weak chemical bond? covalent bonds in solution hydrogen bonds in solution ionic bonds in solids nonpolar covalent bonds in solids

Answers

Hydrogen bond exemplifies a weak chemical bond.

Hydrogen bond is weak because electrons are not transported to form opposing, attracting charges as they are in ionic bonds or shared as they are in covalent bonds.when hydrogen is covalently bonded to a more electronegative atom, that atom pulls the hydrogen's electron away from it, causing it to become attracted to nearby electronegative atoms with unpaired electrons. As a result, hydrogen has a slight positive charge.The electrostatic contact between the atoms caused by the gain or loss of electrons results in the formation of ionic bond which is the strongest bond. The sharing of electrons or the overlapping of two atomic orbitals results in the formation of covalent bonds.When two atoms share electrons equally, a non-polar covalent bond is created.

Therefore, among all these bonds hydrogen bond is the weakest.

Learn more about electronegative atom here:

https://brainly.com/question/12676386

#SPJ4

Isra is analyzing the properties of several samples of elements to find out which sample is a metalloid. Which set of properties most likely belongs only to a metalloid?

Answers

Answer:

Low luster, can conduct electricity

has a high luster and is very brittle

What is the formula for volume usuing density and mass?

Answers

Answer:

P= [tex]\frac{M}{V}[/tex]

Explanation:

Which of the following best describes a metallic bond?

Answers

Answer:the attraction between positive metal ions and interlocking electrons

Explanation: because I got it right

Other Questions
according to rasmussen , why was the slave revolt a hidden story A circle has a Radius of 40 cm which of these is closest to Its Area what are 5 things that are needed for an idea to be scientifically reliable? Last year the total revenue for Clearline phone company was $13.7 million while the revenue for its competitor,the Speakmore was$10.8 million. What is the absolute difference and relative difference? Postmodern societies focus on which of the following?A. CropsB. Consumer goods and the mediaC. Machines like cotton gins and plowsD. Cattle 3 = 11What's x? During the Middle Ages, Which Emperor reunited EuropeA.ClovisB.Joan of ArcC.CharlemagneD.King John what are convections of the atmosphere and the oceans due to? guys please pray for me tommorow is my maths exam 5 times the difference of 6 and 3expression Myplate is divided into how many sections, and what are they? i need this i am doing a finals review. Read the excerpt below and answer the question.No Soldier shall, in time of peace be quartered in any house, without the consent of the Owner, nor in time of war, but in a manner to be prescribed by law.quarterverb1 they were quartered in a villa: accommodate, house, board, lodge, put up, take in, install, shelter; Military billet.2 I quartered the streets: patrol, range over, tour, reconnoiter, traverse, survey, scout.Which of these options from the thesaurus best describes the way the word quartered is used in this excerpt from the Bill of Rights? Select all that apply.lodgepatrolsheltersurvey Which substances are subject to avogadro law? El espaol es el segundo idioma ms solicitado en las universidades, despus del francs. Projectile motion challenge problem. You are at war. You are stationed with a cannon that can only fire shells at 100 m/s. You may adjust the angle but it takes five seconds to do so. You are positioned on a strategically important bridge 70m high with a mission to protect it from the enemy. Spotters have alerted you to a remote controlled speedboat 3000 m away heading West to your position. It is carrying a bomb to blow up the bridge. The spotter tells you that its initial velocity is 26 m/s and its accelerating at 11 m/s2. You must fire the cannon and destroy the boat as fast as possible before it reaches the bridge. When the speedboat is 3000 m away set that as time = 0s. A. What time do you fire and what is the angle when you do fire? B. Right before you fire a 10m/s wind starts blowing from behind you towards the East. How do you adjust your fire? somebody please help me!! You want to purchase a new bike that costs $142.68. To save for the bike, you mow your neighbor's yard for $40 each week. How much money will you have left over if you buy the bike after saving for 4 weeks? A plane travels 3,625.26 miles in 6.9 hours. What is the planes unit rate?Represent this situation with a fraction.a. Represent this situation using the same units.b. Estimate the quotient.c. Express the divisor as a whole number.d. Use the division algorithm to find the quotient.e. Use multiplication to check your work Which two characteristics should be included in the setting of a story?the physical environment where the story takes placethe sequence in which the events take placethe reaction of the main character towards the eventsthe time period during which the events o