When silver nitrate, AgNO₃, reacts with ferric chloride, FeCl₃ we obtain:
a) The balanced chemical equation is: 3AgNO₃ + FeCl₃ → 3 AgCl + Fe(NO₃)₃
b) The limiting reactant is AgNO₃
c) The maximum number of moles of AgCl is 0.147 mol
d) The maximum number of grams of AgCl, is 21.07 grams
Stoichiometrya) The balanced chemical equation for the reaction is:
3AgNO₃ + FeCl₃ → 3 AgCl + Fe(NO₃)₃
b) To find the limiting reactant, first determine the number of moles for each reactant:
Moles of AgNO₃ = (25.0 g) / (169.87 g/mol) = 0.147 mol
Moles of FeCl₃ = (45.0 g) / (162.20 g/mol) = 0.277 mol
Now, divide the moles by their stoichiometric coefficients:
AgNO₃: 0.147 mol / 3 = 0.049
FeCl₃: 0.277 mol / 1 = 0.277
Since the value for AgNO₃ is smaller, it is the limiting reactant.
c) The maximum number of moles of AgCl that could be obtained is based on the limiting reactant (AgNO₃) and its stoichiometric ratio:
Moles of AgCl = (0.147 mol AgNO₃) × (3 mol AgCl / 3 mol AgNO₃) = 0.147 mol
d) To find the maximum number of grams of AgCl, use the molar mass:
Mass of AgCl = (0.147 mol) × (143.32 g/mol) = 21.07 grams
The maximum number of grams of AgCl that could be obtained is 21.07 grams.
learn more about stoichiometry
https://brainly.com/question/30186191
#SPJ11
an atom of which element would have no unpaired electrons in its ground state? group of answer choices li c o be b
The element which would have no unpaired electrons in its ground state is beryllium.
The ground state refers to the lowest energy level in which an electron can exist in an atom. An electron in the ground state has no excess energy, therefore it is stable and unlikely to be disrupted by an external force. The energy of the ground state is defined as zero, and all other states have greater energy than it.
The electronic configuration of Be is [tex]1s^2 2s^2[/tex]. In the ground state, both of the 2s electrons in beryllium are paired, so there are no unpaired electrons.
The number of unpaired electrons in the other elements listed is:
Li: one unpaired electron in the 2s orbital
C: two unpaired electrons in the 2p orbitals
O: two unpaired electrons in the 2p orbitals
B: one unpaired electron in the 2p orbital
The element that would have no unpaired electrons in its ground state is Be (beryllium).
To learn more about electronic configuration refer to: https://brainly.com/question/29757010
#SPJ11
What volume will 80 g of sodium alkali occupy？
The volume that 80 g of sodium alkali will occupy depends on the specific type of sodium alkali, as each one has a different molar mass and density. To determine the volume, we would need to know the density of the sodium alkali in question.
If 56.0 grams of nitrogen (N2) are used up by the reaction, how many grams of ammonia (NH3) will be produced ?
17.0g NH3
34.1g NH3
56.0g NH3
102 g NH3
Answer:
its 17.0g NH3
Explanation:
find the number of moles of nitrogen.
CCC Structure and Function Ice and water are made out of the same
molecule, but they have very different properties. List two physical
properties of both ice and water and describe how their structures
result in those properties.
Answer:
Ice is hard/solid, while water is liquid.
Explanation:
The structure of water molecules in ice is much closer together than that of water. Because the molecules are so close together, they are unable to move past each other and thus occupy a set shape and volume as ice.
The structure of water molecules in water, on the other hand, is further apart when compared to ice. Because they are further apart (and have more energy), the molecules are able to slip past each other and thus present as a liquid with a set volume, but not necessarily shape.
Note: Water can of course change phases. By taking energy away from the water we can turn it into ice (molecules slow down until they are stationary). By adding energy to the water we can turn it into steam/vapor (molecules are moving incredibly quickly with great energy and can freely move).
a 14.5 g sample of iron is allowed to react with oxygen to form its oxide. if 20.7 g of the iron oxide compound is formed what is the mass percent for each element in the compound?
In the iron oxide compound, the mass percent for iron is approximately 70.05%, and the mass percent for oxygen is approximately 29.95%.
To determine the mass percent for each element in the iron oxide compound, follow these steps:
Step 1: Identify the mass of iron and oxygen in the compound.
You are given that a 14.5 g sample of iron reacts with oxygen to form 20.7 g of iron oxide compound. So, the mass of iron in the compound is 14.5 g.
Step 2: Calculate the mass of oxygen in the compound.
To find the mass of oxygen in the compound, subtract the mass of iron from the total mass of the compound:
Mass of oxygen = Total mass of compound - Mass of iron
Mass of oxygen = 20.7 g - 14.5 g = 6.2 g
Step 3: Calculate the mass percent for each element.
To find the mass percent of each element, divide the mass of the element by the total mass of the compound and multiply by 100.
Mass percent of iron = (Mass of iron / Total mass of compound) x 100
Mass percent of iron = (14.5 g / 20.7 g) x 100 = 70.05 %
Mass percent of oxygen = (Mass of oxygen / Total mass of compound) x 100
Mass percent of oxygen = (6.2 g / 20.7 g) x 100 = 29.95 %
for more such question on mass percent
https://brainly.com/question/26150306
#SPJ11
When Svante Arrhenius first proposed his acid-base theory, he was a doctoral candidate. His professors thought his ideas were unfounded. Within a decade, the Arrhenius theory of acid-base was widely accepted and praised within the scientific world.Arrhenius defined acids as compounds having ionizable hydrogen and bases as compounds with ionizableA) barium.B) hydronium.C) hydroxide.D) oxygen.
According to Arrhenius, bases are substances containing ionizable hydroxide, while acids are substances with ionizable hydrogen.
Who was behind the Arrhenius theory?The Arrhenius idea was first put forth by Swedish physicist Svante Arrhenius in 1887. Electricity must be able to flow through an environment where ions are free to travel. Svante Arrhenius discovered that the acid solution conducts electricity by dissolving the substance in the solution, which causes the material to then split into ions.
What is the Svante Arrhenius hypothesis?Svante Arrhenius conducted research on the flow of electrical current through chemical solutions. He put up a theory in 1883 that claimed that when rock salt, which is composed of sodium and chlorine, dissolves in water, sodium atoms with positive electrical charges and chlorine atoms with negative charges separate apart.
To know more about Arrhenius visit:-
https://brainly.com/question/9936252
#SPJ1
Does friction waste more work on longer or shorter inclined planes?
How can you tell?
Why do you think this is? (Hint: Remember the stick presses up on the item. Do your hands get warmer faster if you press them together harder while you rub?)
Explanation:
The force of friction is proportional to the normal force = mg cos (angle)
as the angle increases ( shorter incline) the normal force becomes less ( so friction is less)
the steep ramp is shorter and the force of friction is less so the longer, less inclined plane will waste more work because friction is higher and ramp is longer.
Another way to look at it....as the ramp becomes steeper and steeper it becomes closer to being vertical....when there would be no friction...thus less wasted work on friction
an unknown salt is either nahs, pb(no3)2, al(clo4)3 or crcl3. if a 0.10 m solution of the salt is acidic, what is the possible identity of the salt? choose all that apply.
A strong base and a mild acid are dissolved in a basic solution. A salt of a strong acid and a weak base is an acidic solution.
Strong acid and strong base salt solution is known as neural. NaCN, NaNO 2, and KF solutions are basic, while NH 4 NO 3 solution is acidic. NaCl and KBr solutions are neutral. A salt containing an anion of a strong acid and a cation of a weak base results in an acidic solution with a pH lower than 7. This is because the cation functions as weak. When a salt of a strong acid and a weak base reacts with water, the cation undergoes hydrolysis, which produces a flourishing H+ ion. Hence, a salt of a weak base in an aqueous solution with a strong acid is acidic.
Learn more about acidic here-
https://brainly.com/question/14072179
#SPJ1
If 27 moles of fluorine gas react how many moles of chlorine gas will be produced at stp
If 27 moles of fluorine gas react with an equivalent number of moles of chlorine gas, 54 moles of ClF will be produced at STP. The molar volume of an ideal gas at STP is 22.4 L/mol.
The balanced chemical equation for the reaction between fluorine gas (F2) and chlorine gas (Cl2) is:
F2 + Cl2 → 2ClF
From the balanced equation, we can see that 1 mole of F2 reacts with 1 mole of Cl2 to produce 2 moles of ClF.
Therefore, if 27 moles of F2 react, they will react with an equivalent number of moles of Cl2 to produce twice as many moles of ClF. That is:
27 moles of F2 + 27 moles of Cl2 → 54 moles of ClF
At STP (standard temperature and pressure), which is 0°C and 1 atm, the molar volume of an ideal gas is 22.4 L/mol. Therefore, 27 moles of any gas will occupy a volume of:
27 moles x 22.4 L/mol = 604.8 L
So, the reaction between 27 moles of F2 and an equivalent number of moles of Cl2 at STP will produce 54 moles of ClF, which will occupy a volume of:
54 moles x 22.4 L/mol = 1209.6 L.
Learn more about chlorine gas here;
https://brainly.com/question/13123721
#SPJ1
Why does iodine dissolve in hexane, but not in water?
Answer:
Since iodine is a non-polar ion, it will melt in a non-polar solvent like hexane. While water is a polar solvent, lodine does not react in it.
According to Appendix D of your lab manual, how do you determine if a data point can be ignored when calculating the average in General Chemistry? By using the Q-test at 90% confidence By using the Q-test at 95% confidence By using the standard deviation at 90% confidence By using the standard deviation at 95% confidence
In General Chemistry, it is possible to use the Q-test with a 90% confidence level or the standard deviation with a 90% confidence level to decide whether a data point should be ignored when computing the average.
According to Appendix D of the lab manual for General Chemistry, a data point can be considered an outlier and can be ignored when calculating the average if it falls outside the critical range determined by the Q-test at 90% confidence level.
The Q-test is a statistical test that compares the difference between a suspected outlier and the nearest value to it. If the calculated Q-value is greater than the critical Q-value for the given number of data points at 90% confidence level, then the suspected data point is considered an outlier and can be removed from the data set.
Alternatively, the standard deviation can also be used to determine if a data point is an outlier. A data point can be considered an outlier if it falls outside of the range of ± 1.645 standard deviations from the mean at 90% confidence level, or ± 1.96 standard deviations from the mean at 95% confidence level.
In summary, the Q-test at 90% confidence level or the standard deviation at 90% confidence level can be used to determine if a data point should be ignored when calculating the average in General Chemistry.
To learn more about General Chemistry refer to:
brainly.com/question/23686981
#SPJ4
3. there is a change in color in the reaction mixture that occurs as the reaction progresses. what causes this change of color? what does this tell us about the reaction?
The change in color that occurs in the reaction mixture as the reaction progresses is due to the formation of Maillard reaction products.
The Maillard reaction is a chemical reaction that occurs between amino acids and reducing sugars in foods when they are heated, resulting in the formation of brown color and flavor compounds.
The reaction involves a complex series of chemical reactions, including the homolytic cleavage of a carbon-carbon bond, as well as the loss of a double bond and the formation of an alkane structure. The formation of these brown color compounds tells us that the Maillard reaction is occurring and that it is producing the characteristic brown color and flavor associated with Maillard reaction products in foods.
To learn more about reaction mixture refer to:
brainly.com/question/14553963
#SPJ4
In an investigation, water in an Erlenmeyer flask is placed on a hot plate. As the water is heated, the cooler, denser water at the surface sinks and pushes the watermen water to the top. What do the arrows in the drawing MOST likely represent?
answer choices
phase changes
convection currents
electromagnetic radiation
energy transfer by conduction
The arrows in the drawing most likely represent convection currents.
Hence, option (b) is correct choice.
Convection is a mode of heat transfer that occurs due to the mass motion of fluids like liquids and gases. Convection is only possible when there are differences in density within the fluid.Convection currents arise in liquids as they get heated, with the warmer liquid expanding and becoming less dense. As a result, the warmer liquid rises, displacing the cooler liquid, which falls and displaces the next layer of liquid, creating a convection current. This process is known as natural convection.Currently, convective processes are utilized to carry out various operations. By using these processes, the heat transfer rate is increased, resulting in a quicker reaction rate, and the convective nature of these processes makes them well-suited for many continuous industrial procedures. These processes are also used in various power plant cycles to increase energy efficiency.For more questions on convection currents
https://brainly.com/question/29812545
#SPJ11
acetic acid and sodium hydroxide balanced equation
The balanced chemical equation of acetic acid and sodium hydroxide is given as follows:`
CH3COOH + NaOH → CH3COONa + H2O`
Here, acetic acid is CH3COOH and sodium hydroxide is NaOH.
In this reaction, acetic acid reacts with sodium hydroxide to form sodium acetate and water. Acetic acid is a weak acid, while sodium hydroxide is a strong base. When the two are mixed, they react in a neutralization reaction, where the acid and base neutralize each other's properties.
The hydrogen ion (H+) from the acid combines with the hydroxide ion (OH-) from the base to form water (H2O), and the remaining ions (CH3COO- and Na+) combine to form sodium acetate (CH3COONa). The balanced equation ensures that the number of atoms of each element is equal on both the reactant and product sides.
For more question on balanced chemical equation click on
https://brainly.com/question/23877810
#SPJ11
A substance that cannot be decomposed by a simple chemical process into two or more different substances is ________.
Answer:
an element
Explanation:
A pure substance that cannot be broken down in ways such as heating, electrolysis, or reaction. Gold, silver, and oxygen are prime examples of elements.
A 1.00 l solution contains 3.50×10-4 m cu(no3)2 and 1.75×10-3 m ethylenediamine (en). the kf for cu(en)22 is 1.00×1020. what is the concentration of cu2 (aq) in the solution?
The concentration of Cu2+ in the solution is 3.50×10^-4 - 1.29×10^-10 M, which is approximately equal to 3.50×10^-4 M.
The formation constant, Kf, for the complex ion Cu(en)22+ is given as 1.00×10^20. The concentrations of Cu(NO3)2 and ethylenediamine (en) are given as 3.50×10^-4 M and 1.75×10^-3 M, respectively.
The reaction that forms the complex ion can be represented as,
Cu2+ (aq) + 2en (aq) ⇌ Cu(en)22+ (aq)
Let's assume that x is the concentration of Cu2+ ion that reacts with en to form the complex. At equilibrium, the concentration of Cu(en)22+ can be expressed as (1.75×10^-3 - 2x) M (since 2 moles of en react with 1 mole of Cu2+ to form 1 mole of Cu(en)22+).
The concentration of Cu2+ remaining in solution is (3.50×10^-4 - x) M. Using the formation constant expression for the complex ion:
Kf = [Cu(en)22+]/[Cu2+][en]^2
Substituting the given values and the above concentrations at equilibrium,
1.00×10^20 = (1.75×10^-3 - 2x)/[(3.50×10^-4 - x)(1.75×10^-3)^2]
Simplifying and solving for x,
x = 1.29×10^-10 M
Therefore, the concentration of Cu2+ in the solution is 3.50×10^-4 - 1.29×10^-10 M, which is approximately equal to 3.50×10^-4 M.
To know more about concentration, here
brainly.com/question/10725862
#SPJ4
Explain how the sun warms Earth's atmosphere by radiation, conduction, and convection
Heat energy is released into the environment as the rock's temperature rises as a result of conduction, creating an air bubble that is warmer than the surrounding air. This air bubble ascends into the upper atmosphere.
Via convection or radiation, how does heat from the sun reach Earth?Heat transfer through conduction is not feasible since there is no medium separating the surface of the Earth from the Sun. The method of heat transfer that takes place without the aid of a medium is called radiation. So, we can say that radiation is how the heat from the Sun reaches the Earth.
How does convection heat the atmosphere of the earth?Convection causes temperature disparities by forcing portions of a liquid or gas to heat up or cool down faster than their surrounds.
To know more about Heat energy visit:-
brainly.com/question/14225536
#SPJ1
the enthalpy change for the reaction is -67 kj. is the reaction endothermic or exothermic? is energy absorbed or released as the reaction occurs?
Given that the enthalpy change for the reaction is -67 kJ, the reaction is exothermic, and energy is released as the reaction occurs.
Enthalpy refers to the amount of energy that is stored in a compound's chemical bonds or the heat released or absorbed during a chemical reaction. It is a thermodynamic property that determines the quantity of energy released or absorbed during a process such as chemical reaction or change in state.
When a reaction absorbs energy from its surroundings, it is known as an endothermic reaction. The reaction's enthalpy, which is the energy released or absorbed during a reaction, is positive. The system absorbs energy, which is why it is denoted by a positive value.
When a reaction releases energy into the surrounding, it is referred to as an exothermic reaction. The reaction's enthalpy, which is the energy released or absorbed during a reaction, is negative. The system releases energy, which is why it is denoted by a negative value.
Therefore, the reaction is exothermic and energy is released when the reaction occurs.
To learn more about "enthalpy change", visit: https://brainly.com/question/1445358
#SPJ11
write the autoionization reaction for acetic acid, ch3cooh.
The autoionization reaction for acetic acid (CH₃COOH), is CH₃COOH + H₂O → CH₃COO- + H₃O+.
Acetic acid is also known as ethanoic acid. The first part of the equation, CH₃COOH, represents the acetic acid molecule with one hydrogen atom attached to each of the three oxygen atoms. The second part of the equation, H₂O, represents water.
When acetic acid reacts with water, a hydrogen proton (H+) is released, which is denoted by the H₃O+ on the right side of the equation. The H+ ion binds to the oxygen atoms of the acetic acid, forming a negatively-charged acetate ion, CH₃COO-. This is what is referred to as the autoionization of acetic acid.
The autoionization reaction is important in aqueous solutions of acetic acid because it affects the pH of the solution. Acetic acid is a weak acid, meaning that it does not completely dissociate in water. When it autoionizes, a small percentage of the acetic acid molecules react with the water, increasing the concentration of H+ ions and decreasing the pH of the solution.
As a result, aqueous solutions of acetic acid have pH values lower than 7, typically between 4 and 5.
To know more about acetic acid refer here:
https://brainly.com/question/16970860#
#SPJ11
A halogen gas sample showing a pressure of 1. 63 atm has a density of 7. 37g/l at 157C. What gas is it?
The molar mass of the gas is approximately 137.7 g/mol. This corresponds to the molar mass of iodine (I₂). Therefore, the halogen gas sample is iodine gas (I₂).
The ideal gas law relates the pressure, volume, number of moles, and temperature of a gas: PV = nRT
where P is pressure, V is volume, n is the number of moles, R is ideal gas constant, and T is temperature in Kelvin.
The molar mass of a gas can be determined from its density using the equation:
d = m/V = PM/RT
where d is the density, m is the mass, V is the volume, P is the pressure, M is the molar mass, R is the ideal gas constant, and T is the temperature in Kelvin.
We can use these equations to determine the molar mass and identity of the halogen gas sample:
First, we need to convert temperature to Kelvin:
T = 157°C + 273.15 = 430.15 KN
Next, we can rearrange the density equation to solve for the molar mass:
M = (dRT)/P
M = (7.37 g/L) × (0.0821 L·atm/mol·K) × (430.15 K) / (1.63 atm)
M = 137.7 g/mol
To know more about ideal gas law here
https://brainly.com/question/4147359
#SPJ4
Which one of these reactions is the reaction whose ∆G° is equal
to the standard free energy of formation (∆G°f) of ammonium
sulfate, (NH4)2SO4?
A) 2 NH3(g) + H2SO4(l) –––> (NH4)2SO4(s)
B) 2 NH3(g) + SO3(g) + H2O(l) –––> (NH4)2SO4(s)
C) N2(g) + 4 H2(g) + S(s) + 2 O2(g) –––> (NH4)2SO4(s)
D) (NH4)2SO4(s) ––––> N2(g) + 4 H2(g) + S(s) + 2 O2(g)
E) 2 NH4+(aq) + SO42-(aq) –––> (NH4)2SO4(s)
The correct answer is A) 2 NH3(g) + H2SO4(l) –––> (NH4)2SO4(s). This reaction represents the formation of ammonium sulfate, (NH4)2SO4, from its constituent elements in their standard states.
The standard free energy of formation (∆G°f) refers to the energy change when one mole of a compound is formed from its elements in their standard states. In this case, the reaction given in option A shows the formation of one mole of ammonium sulfate from its constituent elements.
Know more about reactions
https://brainly.com/question/11231920
#SPJ11
How many ions does CaCl2 dissociate into in water?
When CaCl₂ is dissolved in water, it dissociates into three ions: one calcium ion (Ca²⁺) and two chloride ions (2Cl⁻). The dissociation of CaCl₂ in water can be represented by the following equation: CaCl₂(s) → Ca²⁺(aq) + 2Cl⁻(aq)
When calcium chloride (CaCl₂) is dissolved in water, it dissociates into three ions - one calcium ion (Ca²⁺) and two chloride ions (2Cl⁻) due to its ionic nature. In water, the polar nature of the water molecules allows them to interact with the ionic compound, causing the ions to separate from each other and become surrounded by water molecules, forming an aqueous solution. The dissociation of CaCl₂ into Ca²⁺ and 2Cl⁻ ions increases the total number of ions in solution and therefore, the electrical conductivity of the solution. This property makes CaCl₂ a useful compound in many industrial and laboratory applications.
Learn more about CaCl₂ here: brainly.com/question/28061218
#SPJ4
What is the relative pH at the equivalence point of the titration of a weak acid with a strong base? OpH > 7 OpH = 7 OpH < 7
The relative pH at the equivalence point of the titration of a weak acid with a strong base is pH > 7.
The equivalence point in titration is the point at which the amount of added titrant is just enough to completely neutralize the analyte solution. The equivalence point can be found from an acid-base titration curve by the inflection point of the curve. In titration, the equivalence point occurs when the number of moles of titrant is equal to the number of moles of the analyte. For the titration of a weak acid with a strong base, the equivalence point will have a pH greater than 7. This is because the strong base will completely neutralize the weak acid and any excess base will increase the pH of the solution beyond neutrality.
In other words, the solution has become basic because of the excess hydroxide ions added from the titrant, despite the fact that the original substance being analyzed (acetic acid) was acidic. Therefore, the relative pH at the equivalence point of the titration of a weak acid with a strong base is greater than 7.
Know more about Equivalence point here :
https://brainly.com/question/24584140
#SPJ11
an unknown weak base with a concentration of 0.0910 has a ph of 12.40 what is the kb of the weak base g
The Kb of the weak base is 3.60 × 10-12M.
The dissociation constant of the weak base can be calculated by using the following formula:
Kb = Kw / Ka
Where Kw is the ionization constant of water,
Ka is the acid dissociation constant, and Kb is the base dissociation constant.
The pH of the solution can be calculated by using the following formula:
pH = 14 - pOH where pOH is the negative logarithm of the hydroxide ion concentration.
The pOH of the solution can be calculated by using the following formula:
pOH = 14 - pH
The concentration of hydroxide ions can be calculated by using the following formula:
OH- = 10⁻ᵖ[ᵖᵒʰ⁻]
The concentration of the weak base can be calculated by using the following formula:
[B] = [OH-] + Kb / [OH-]
The concentration of hydroxide ions can be calculated by using the following formula:
Kb = [OH-]2 / [B]
Substitute the given values in the formula:[OH-] = 10⁻ᵖ[ᵒʰ]⁻= 10⁻¹².⁴⁰= 3.98 × 10-13[M]
[OH-] ²= 3.98 × 10-13× 3.98 × 10-13= 1.59 × 10-25[M2]
[B] = [OH-] + Kb / [OH-]0.0910 = (3.98 × 10-13) + (Kb / 3.98 × 10-13)
Kb = (0.0910 - 3.98 × 10-13) × 3.98 × 10-13Kb = 3.60 × 10-12M
Hence the Kb of the weak base is 3.60 × 10-12M.
Learn more about base dissociation constant for a weak base : https://brainly.com/question/3484994
#SPJ11
Draw the following particle (molecular compound).
SO4^-2
Counting electrons
When drawing molecules, an important first step is to first count the total valence electrons (electrons in the outer shell) in the molecule. Sulfur has 6 valence electrons, each oxygen has 6 valence electrons, and the 2- charge indicates there are 2 additional electrons. This comes out to be a total of 32 electrons.
Drawing the molecule
The next step is to draw the general shape of the molecule. In this case, sulfur is the central atom and 4 oxygens surround it, so draw a sulfur atom labelled as S with 4 oxygens equally spaced around it.
Next, you want to fill in the bonds between each oxygen to the sulfur atom. This will be a total of 4 bonds.
Now, count the number of electrons used. 4 bonds consisting of 2 shared electrons each is 8 electrons. We have 24 electrons left.
Add these remaining 24 electrons to the surrounding oxygens in pairs of 2, making sure that no atom has more than 8 electrons around it (1 bond and 3 pairs).
This is one possible structure of SO4 2-, but it is not the most common one.
Formal charge of each atom in a molecule is calculated by taking the normal amount of valence electrons, in sulfur for example, 6, and subtracting it by the total amount of non-bonding electrons and the amount of bonds. In this case in the structure we just drew above, the formal charge is 6-4=2, where 4 is the amount of bonds to sulfur.
FC=V−N−B/2
this is the equation for formal charge. V is the valence electrons of the atom in its ground state, or when it is not bonded to anything else. N is the number of non-bonding, or loose, electrons around the atom in the molecule. B is the number of electrons that are in bonds.
All atoms in a molecule want to have a formal charge as close to zero as possible, and this is a rare case where sulfur can be an exception to the octet rule and have more than 8 valence electron in order to satisfy this need.
Therefore, in this case, 2 of the single bonds around sulfur can be replaced by double bonds, so that the formal charge is 6-6=0. So, for two of the oxygens, remove one pair of electrons and turn them into bonds with sulfur.
There are several different places you can add these double bonds, which lead to structures called resonant structures. Resonant structures have the same number of non bonding electrons and bonds, but the single and double bonds are in different places.
The attached image is just one resonant structure, but keep in mind there are other possible very similar structures-- for example, the double bonds could be opposite of each other.
These structures are more common as they have the lowest formal charge on the central atom, sulfur.
zeolites theoretically can be made magnetic by adding sodium ion to them. T/F ?
The statement "zeolites theoretically can be made magnetic by adding sodium ion to them" is true.
Zeolites are a group of minerals that are highly porous and capable of exchanging ions. This property enables zeolites to absorb and store sodium ions, and when exposed to an external magnetic field, the stored sodium ions create their own magnetism, causing the zeolite to become magnetic.
The process of creating a magnetic zeolite begins with a zeolite powder, which is typically heated to very high temperatures to create a larger surface area for the sodium ions to bind to. Then, a solution of sodium ions is introduced, which is then absorbed into the zeolite.
The zeolite is then placed in a magnetic field, which causes the absorbed sodium ions to align in the direction of the field, creating a magnetic property in the zeolite. To summarize, it is true that zeolites can be made magnetic by adding sodium ions to them.
This is accomplished by exposing the zeolite powder to high temperatures and introducing a solution of sodium ions, which are then absorbed and exposed to a magnetic field that causes the ions to align and create magnetism in the zeolite.
To know more about zeolites refer here:
https://brainly.com/question/28588461#
#SPJ11
Select Strong Acid as the analyte and Phenolphthalein as the indicator in the titration interactive Analyte, 25.0 mL Strong Acid, 1.0 To the tenths place, determine the volume of titrant added at each of these points. Indicator Phenolphthalein PH=13,22 equivalence point: Incorect end point: Incorrect Titrant Added (mL) Suppose that you did not know the concentration of the acid. Use the end-point volume, the concentration of the base, and the volume of the acid t0 calculate the concentration of the acid. Titration Curve Concentration Chart Titrant: Strong Base, 1.0 M MOH [HX] 50 35.0 mL Incorrect
The Strong acid's molarity is 0.55952 M, which corresponds to its concentration.
Describe acid.Acid is a kind of chemical substance that has a sour taste and can harm things by corroding them. Many common items like vinegar and lemon juice include acids, which are frequently used as cleaning agents. Acids can also be present in nature, for instance in the rainfall. A neutralized solution, or salt, is produced when an acid and a base react. Bases have a pH level greater than 7, whereas acids have a pH level lower than 7.
Molarity of acid = (Volume of base (mL) * Concentration of base (M) )/ Volume of acid (mL)
In this case, the concentration of the acid would be calculated as follows:
Molarity of acid = (14 mL * 1 M )/ 25.1 mL
= 0.55952 M
To know more about Strong Acid visit:-
https://brainly.com/question/30781545
#SPJ1
Why does salt as a solid compound not exist in the ocean?
Salt as a solid compound does exist in the ocean, but it is not present as individual molecules. Instead, it exists as ionic compounds like sodium chloride (NaCl) and magnesium chloride (MgCl2), which are dissolved in the water as ions.
Water has the ability to dissolve ionic compounds such as salt because water molecules have polar properties.
What is saltSalt is soluble in water due to the charges of salt ions being attracted to water molecules. When salt dissolves in water, the Na+ and Cl- ions are separated from one another and dissolved by the water. This creates a homogenous mixture that we refer to as seawater or saltwater.
Ionic compounds exist in the ocean as dissolved particles. In seawater, salt concentration can range from 3.5% to 5% depending on the ocean region. The concentration of salt in the ocean is responsible for its salinity. When water evaporates from the ocean surface, the salt concentration increases, which in turn raises the salinity of the water.
Learn more about salt at
https://brainly.com/question/29349731
#SPJ11
calculate the moles of 1-chlorobutane used and the moles of sulfuryl chloride used and indicate which was the limiting reagent. explain how this result is consistent or inconsistent with your gc data.
Sulfuryl chloride is in excess and 1-chlorobutane is the limiting reagent. This result is consistent with the GC data.
Let's assume we used 5 grams of 1-chlorobutane and 7 grams of sulfuryl chloride. The molar mass of 1-chlorobutane is 118.5 g/mol, and the molar mass of sulfuryl chloride is 134.97 g/mol.
Moles of 1-chlorobutane used = 5 g / 118.5 g/mol = 0.042 moles
Moles of sulfuryl chloride used = 7 g / 134.97 g/mol = 0.052 moles
To determine the limiting reagent, we need to compare the moles of each reactant used to the stoichiometric coefficients in the balanced chemical equation for the reaction. The balanced chemical equation for the reaction between 1-chlorobutane and sulfuryl chloride is,
C₄H₉Cl + SO₂Cl₂ → C₄H₉SO₂Cl + HCl
The stoichiometric ratio between 1-chlorobutane and sulfuryl chloride is 1:1. Therefore, we can see that 0.042 moles of 1-chlorobutane would require 0.042 moles of sulfuryl chloride for complete reaction. However, we used 0.052 moles of sulfuryl chloride, which is greater than the amount required for complete reaction. This means that sulfuryl chloride is in excess and 1-chlorobutane is the limiting reagent.
This result is consistent with the GC data, which showed a lower yield of the product than expected. The fact that 1-chlorobutane was the limiting reagent suggests that not all of it was consumed in the reaction, which could explain the lower yield observed in the GC data.
To know more about limiting reagent, here
brainly.com/question/30723867
#SPJ4
When a weak base is titrated with a strong acid the equivalence point is?
When a weak base is titrated with a strong acid, the equivalence point is: a weak acid's formation.
The equivalence point happens when the moles of the acid equal the moles of the weak base, and pH = 7. It is because the hydronium ion concentration is identical to the hydroxide ion concentration in pure water at this pH. The pH of a weak base solution can be measured during titration.
The reaction between weak bases and strong acids happens in two steps. The first step is the formation of salt through the reaction between acid and base, and the second step is the hydrolysis of this salt. Anions derived from weak bases react with water and accept protons to produce hydroxide ions.
On the other hand, the cations derived from strong acids do not hydrolyze to produce acidic solutions. They can neither react with the acid nor the water, so the only effect is an increase in the concentration of cations in the solution.
The weak base's concentration before and after the equivalence point is much less than the weak acid concentration that is produced at the equivalence point. During the titration, the pH increases slowly initially, but it rises rapidly near the equivalence point, where the weak acid is produced.
After the equivalence point, the pH of the solution is lower because the excess of strong acid has changed the buffer solution into a weak acid solution.
To know more about weak acids refer here:
https://brainly.com/question/22104949#
#SPJ11