The density of the solid cylinder is calculated to be as approximately 17.7 g/cm³.
What is meant by density?The mass per unit of volume of a substance is known as density and symbol that is mostly used for density is ρ.
As the formula for the density of an object is:
density = mass / volume
volume = π x radius² x height
volume = π x (3cm)² x 10cm
volume = 282.74 cm³
mass = 5kg x 1000g/kg = 5000g
density = mass / volume
density = 5000g / 282.74 cm³
density ≈ 17.7 g/cm³
Therefore, the density of the solid cylinder is approximately 17.7 g/cm³.
To know more about density, refer
https://brainly.com/question/952755
#SPJ9
What is the total molar mass of oxygen in 4.000 molea of CO2
Explanation:
Refer to pic..........
What adaptatión do Judy and her parents have that help them run from predators coming?
Judy and her parents have an adaptation that helps them run from predators coming; this adaptation is called flight. Flight is an innate ability to fly away from danger by using wings or other means.
What is adaptation ?Adaptation is the process of change in an organism that helps it better survive in its environment. This can include changes in behavior, physiology, and even genetics that allow an organism to better survive and reproduce. For example, a bird may migrate to a warmer place in the winter to escape the cold temperatures, or a plant may produce thorns to protect itself from being eaten by predators. Adaptation is an important factor in the survival of a species, as it allows populations to adjust to new environmental conditions. As environmental conditions change over time, adaptation can help species adjust to survive in the new conditions.
Flight is a common adaptation used by many animals, including Judy and her parents. Flight allows them to quickly fly away from predators in order to avoid being hurt or killed. They can fly away from danger in a matter of seconds, giving them a better chance of survival. Flight is an important adaptation that helps Judy and her parents stay safe and out of harm's way.
To learn more about adaptation
https://brainly.com/question/8648278
#SPJ1
HELP! ILL MARK YOU AS BRAINLIST
The most common source of copper (Cu) is the mineral chalcopyrite (CuFeS2). How many kilograms of chalcopyrite must be mined to obtain 400.
g of pure Cu
Express your answer to three significant figures and include the appropriate
units.
To solve this problem, we need to use the molar mass of copper and the stoichiometry of the balanced equation to determine how much chalcopyrite is needed to produce 400 g of pure copper.
The molar mass of copper is 63.55 g/mol, which means that 1 mole of copper contains 63.55 grams of copper. Using this information, we can convert 400 g of copper to moles:
400 g Cu x (1 mol Cu/ 63.55 g Cu) = 6.292 mol Cu
From the balanced equation of the reaction, we know that 1 mole of chalcopyrite (CuFeS2) produces 1 mole of copper. Therefore, we need to mine the same number of moles of chalcopyrite as the number of moles of copper required.
To determine the number of moles of chalcopyrite needed, we can use the molar mass of chalcopyrite:
Molar mass of CuFeS2 = (1 x atomic mass of Cu) + (1 x atomic mass of Fe) + (2 x atomic mass of S)
= (1 x 63.55 g/mol) + (1 x 55.85 g/mol) + (2 x 32.06 g/mol)
= 183.53 g/mol
Now we can convert the moles of copper to moles of chalcopyrite:
6.292 mol CuFeS2 x (183.53 g CuFeS2/ 1 mol CuFeS2) = 1154.4 g or 1.1544 kg of CuFeS2
Therefore, we need to mine 1.1544 kg of chalcopyrite to obtain 400 g of pure copper.
2.62 Predict the chemical formulas of the compounds formed by the following pairs of ions: (a) Cr3+ and Br, (b) Fe3+ and O2, (c) Hg22+ and CO2, (d) Ca2+ and CIO3, (e) NH4+ and PO³
Answer:
(a) Cr3+ and Br- will form CrBr3 (chromium(III) bromide)
(b) Fe3+ and O2- will form Fe2O3 (iron(III) oxide)
(c) Hg22+ and CO32- will form Hg2CO3 (mercury(I) carbonate)
(d) Ca2+ and ClO3- will form Ca(ClO3)2 (calcium chlorate)
(e) NH4+ and PO43- will form (NH4)3PO4 (ammonium phosphate)
Explanation:
chatGPT
The chemical formulas for the compounds formed by the given pairs of ions are: (a) CrBr3, (b) Fe2O3, (c) Hg2(CO3)2, (d) Ca(ClO3)2, and (e) (NH4)3PO4.
Explanation:(a) Cr3+ and Br- : In order to form a neutral compound, the charges of the ions must balance. The charge of Cr3+ is 3+ and the charge of Br- is 1-. To balance the charges, we need three Br- ions for every Cr3+ ion. Therefore, the chemical formula is CrBr3.
(b) Fe3+ and O2- : The charge of Fe3+ is 3+ and the charge of O2- is 2-. To balance the charges, we need two O2- ions for every Fe3+ ion. Therefore, the chemical formula is Fe2O3.
(c) Hg22+ and CO2- : The charge of Hg22+ is 2+ and the charge of CO2- is 2-. The charges are already balanced, so no extra ions are needed. Therefore, the chemical formula is Hg2(CO3)2.
(d) Ca2+ and ClO3- : The charge of Ca2+ is 2+ and the charge of ClO3- is 1-. To balance the charges, we need two ClO3- ions for every Ca2+ ion. Therefore, the chemical formula is Ca(ClO3)2.
(e) NH4+ and PO3- : The charge of NH4+ is 1+ and the charge of PO3- is 3-. To balance the charges, we need three NH4+ ions for every PO3- ion. Therefore, the chemical formula is (NH4)3PO4.
Learn more about Chemical Formulas here:https://brainly.com/question/36379566
#SPJ3
write a lab report for this lesson's lab. be sure that your report includes all major elements of lab report meets your teacher's content and format expectations is clearly organized and formatted demonstrates strong scientiffic reasoning and writing
Including the title, abstract, introduction, techniques & materials, results, commentary, conclusion, & references, a lab report is divided into eight components.
What exactly is a chemistry lab?This lab is equipped with all the tools required for sample preparation as well as the standards needed for a variety of fluid and solid sample analyses. Glassware, exhaust fans, a muffled furnace, centrifuges, aggregate mills, and ovens are among the conventional equipment found in the lab.
In chemistry, how do we do labs?It gives you an opportunity to put your knowledge to use while reinforcing the topics you have studied in class. You will gain knowledge of certain crucial experimental skills that are required if you want to work as a successful chemist.
To know more about labs visit:
https://brainly.com/question/29296260
#SPJ1
How much heat is transferred when the temperature of 36.4g of aluminum
is raised from 32.5°C to 71.6°C?
The amount of heat transferred would be 1269.67 J.
Heat transfer calculationTo calculate the heat transferred (q), we can use the specific heat capacity (c) of aluminum, which is 0.903 J/g°C, the mass of aluminum (m), and the change in temperature (ΔT):
q = m x c x ΔT
where ΔT = (final temperature - initial temperature)
Substituting the given values, we get:
ΔT = 71.6°C - 32.5°C = 39.1°C
m = 36.4 g
c = 0.903 J/g°C
q = 36.4 g x 0.903 J/g°C x 39.1°C
q = 1269.67 J
Therefore, the heat transferred when the temperature of 36.4g of aluminum is raised from 32.5°C to 71.6°C is 1269.67 J.
More on heat transfer can be found here: https://brainly.com/question/13433948
#SPJ1
childrens chewable tylenol contains 80. mg acetaminophen per tablet. If the measure dosage is 10. mg of drug per tablet of body mass, then how many tablets are needed for a 42 pound child?
If the chewable contains 80. mg acetaminophen and dosage is 10. mg per body mass The tablets needed for the 42 pound child is 2.38 tablets
How to solve for the drug neededTo calculate the number of tablets needed for a 42 pound child, we need to use the recommended dosage of 10 mg of acetaminophen per kilogram of body weight.
First, we need to convert the child's weight from pounds to kilograms:
42 pounds = 19.05 kilograms
Next, we can calculate the total amount of acetaminophen that the child needs based on their weight:
19.05 kg x 10 mg/kg = 190.5 mg
Finally, we can divide the total amount of acetaminophen needed by the amount of acetaminophen per tablet:
190.5 mg ÷ 80 mg/tablet = 2.38 tablets
Since we can't give a partial tablet, we would round up to 3 tablets.
Read more on acetaminophen here:https://brainly.com/question/14465174
#SPJ1
Why are oceans a major part of the water cycle?
A. because they are large bodies of salt water that easily evaporate salt into the air
B. because they are large bodies of salt water that fresh water can be evaporated
from
C. because the salt water condenses easily to become a gas in the air
D. because the salt water runs off onto land to fill lakes and streams
Answer:
I think it's B
Explanation:
Oceans and Seas and the Water Cycle Completed. The oceans are, by far, the largest storehouse of water on earth — over 96% of all of Earth's water exists in the oceans. Not only do the oceans provide evaporated water to the water cycle, they also allow water to move all around the globe as ocean currents.
Good luck!
How many moles of O2 are required to generate 12 moles SO2 gas?
From the balanced chemical equation:
2CuFeS2 + 5O2 → 2Cu + 2FeO + 4SO2
We can see that for every 5 moles of oxygen (O2) that react, 4 moles of sulfur dioxide (SO2) are produced. Therefore, we can use a proportion to calculate the number of moles of O2 required to produce 12 moles of SO2:
5 moles O2 : 4 moles SO2 = x moles O2 : 12 moles SO2
Cross-multiplying, we get:
5 moles O2 x 12 moles SO2 = 4 moles SO2 x (x moles O2)
60 = 4x
x = 15
Therefore, 15 moles of O2 are required to generate 12 moles of SO2 gas.
Answer:
15 was right on acellus
Explanation:
need some really big help on this i’ll give some really good points.
The excess reagent in the given reaction is Cl₂.
What is excess reagent?An excess reactant is a substance that is not wholly consumed or entirely reacted in a chemical reaction. It is also known as an excess reagent.
Let us consider the following reaction of the formation of sodium chloride.
2Na(s)+Cl₂(g) → 2NaCl(s)
Sodium metal reacts with diatomic chlorine gas. The above equation indicates that 2 moles of sodium will react with 1 mole of chlorine. If we have equivalent moles of sodium and chlorine,
Then sodium will be a limiting reactant, while chlorine will be an excess reactant.
Given,
ZrSiO₄ + 2Cl₂ → ZrCl₄ + SiO₂ + O₂
Cl₂ is the excess reagent.
Therefore, The excess reagent in the given reaction is Cl₂.
Learn more about excess reagent, here:
https://brainly.com/question/28100156
#SPJ1
I WILL MARK BRAINLIEST
Have rabbits in Australia had a negative impact on the environment?
Yes
No
Which of the following is NOT an effect that an invasive species can have on an ecosystem?
Responses
overpopulation of the invasive species due to no natural predators
reduced survival rate of native organisms
reduced resources for native organisms
introducing new organisms ALWAYS benefits the native organisms in the ecosystem
Invasive species are__accidentally transported to a new ecosystem.
always
sometimes
never
Attempts to control the rabbit population has NOT cost the Australian government (taxpayers) any money.
True
False
If people do nothing to try to control the rabbit population in Australia, over time the vegetation would decrease, which would then cause the rabbit population to __
increase
decrease
stay the same
According to the article, which of the following organisms were NOT specifically mentioned as being impacted by the rabbit population?
Humans
Pig-footed bandicoot
Humans
Pig-footed bandicoot,
Eremophila plant,
Kangaroo
Mosquitos and fleas carrying the Myxoma virus
Fencing
Releasing wolves
Trapping and Shooting
Answer:
1.yes
2.invasive species are_ accidentally transported to a new ecosystem
3.false
4.increase
5.
6.fencing
sorry I don't know the fifth one but I hope it helpful
How do the types and numbers of atoms that repeat to make up a substance affect its properties?
Answer:
Explanation:
The types and numbers of atoms that repeat to make up a substance, which is also known as its chemical composition, have a significant impact on the substance's properties.
For example, the number of atoms in a molecule can affect its mass and density, as well as its reactivity with other substances. The types of atoms present can affect the chemical reactivity, melting and boiling points, and other physical properties of the substance.
Additionally, the arrangement of atoms in a molecule can also affect its properties. For example, the orientation of atoms can affect the molecule's polarity, which can affect its solubility in different solvents.
In summary, the types and numbers of atoms that repeat to make up a substance can have a significant impact on its properties, including its chemical and physical properties.
Chlorophyll is a class of green pigments that plants use to absorb energy from the sun during photosynthesis. One type of chlorophyll is 6.27% N by mass, and each chlorophyll molecule contains 4 nitrogen atoms. Calculate the molar mass of this type of chlorophyll.
Using the fact that 100 g of chlorophyll an is equal to 0.11191 moles of chlorophyll a, we can now convert the amount of magnesium contained in 100 g of chlorophyll a to moles using the molar mass of magnesium.
What benefits does chlorophyll provide to your body?Supplement manufacturers assert that chlorophyll has a wide range of benefits, including the ability to increase red blood cells, aid in weight reduction, mend damaged skin, remove toxins, reduce inflammation, and prevent cancer. Although the list is impressive, just a few of the assertions are supported by scientific data.
Is daily consumption of chlorophyll a good idea?The FDA states that people of all ages over the age of 12 can easily take 100 mg to 200 mg of oral bengal gram daily as a supplement to relieve odor.
To know more about chlorophyll visit:
https://brainly.com/question/15864413
#SPJ1
ILL GIVE BRAINLY HIRRYDeep ocean currents are caused by differences in ____________. (Lesson 2.09)
Question 20 options:
fish population
water density
water salinity
Coriolis affect
Answer:
water density
Explanation:
These deep-ocean currents are driven by differences in the water's density, which is controlled by temperature (thermo) and salinity (haline). This process is known as thermohaline circulation
your welcome!
23. Given the following equilibrium mixture of gases at 500 °C where AH is negative, what will be the effect of (a) (b) 2CO(g) + 0,2CO₂(g) adding more O, at constant pressure? increasing the temperature? (c) cooling below 100°C? (d) adding a catalyst? (e) doubling the pressure at 200 °C? (f) adding a base to absorb CO₂?
The equilibrium shifts in the direction that tends to oppose the change done.
What is Chemical equilibrium?Chemical equilibrium is the state of a system in which the rate of the forward reaction is equal to the rate of the reverse reaction.
Chemical equilibrium is a dynamic process. The forward and reverse reactions continue to occur even after equilibrium has been reached. However, because the rates of the reactions are the same, there is no change in the relative concentrations of reactants and products for a reaction that is at equilibrium.
The equilibrium reaction is given as -
2 CO + O₂ ⇒ 2CO₂
ΔH = negative
This means that the forward reaction is exothermic.
Addition of oxygen shifts the equilibrium towards the product side.
When the temperature is increased the backward reaction will be favored and the equilibrium will be shifted towards the reactant side.
Cooling below 100⁰C results into shifting the equilibrium towards product side.
Adding a catalyst does not alter the direction of equilibrium.
Doubling the pressure would shift the equilibrium towards product side.
Adding a base to absorb CO₂ would shifts the equilibrium towards the product side.
Therefore, The equilibrium shifts in the direction that tends to oppose the change done.
Learn more about Chemical equilibrium, here:
https://brainly.com/question/12920261
#SPJ9
Answer :Adding of oxygen shifts the equilibrium to the right side which is the product side.
increasing of the temperature will shift the equilibrium to the left side which is the reactant side
cooling below 100c will shift the equilibrium to the right side which is the product side
Adding a catalyst does not affect the chemical equilibrium
Doubling the pressure would shift the equilibrium to the right side which is the product side
Adding a base to absorb CO2 would shift the equilibrium to the product side
Explanation:
In the equation 2Li2O(s)=O2(g)+4L(i)
We heat 25g of Li2O until no more oxygen is produced.
q) How many L of oxygen is expected to be produced.
In the given equation 5.96 L of O2 will be produced.
What is chemical equation?
A chemical equation is a symbolic representation of a chemical reaction that shows the reactants on the left side and the products on the right side, with the coefficients indicating the relative amounts of each substance involved. It follows the law of conservation of mass, which states that mass cannot be created or destroyed in a chemical reaction.
The balanced equation for the reaction is:
2Li₂O(s) → O₂(g) + 4Li(s)
From the equation, we can see that 2 moles of Li₂O produces 1 mole of O₂. We can use this ratio to convert the mass of Li₂O to moles of O₂
First, we need to calculate the number of moles of Li₂O:
n(Li₂O) = m/M
where m is the mass of Li₂O and M is the molar mass of Li₂O. The molar mass of Li₂O is:
M(Li₂O) = 2(M(Li) + M(O)) = 2(6.941 g/mol + 15.999 g/mol) = 45.88 g/mol
Plugging in the values, we get:
n(Li₂O) = 25 g / 45.88 g/mol = 0.544 mol
According to the balanced equation, 2 moles of Li₂O produce 1 mole of O2. So, the number of moles of O2 produced is:
n(O2) = 0.544 mol / 2 = 0.272 mol
Finally, we can convert the number of moles of O2 to liters using the ideal gas law:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature. Assuming the reaction occurs at standard temperature and pressure (STP), which is 0°C (273.15 K) and 1 atm, we can simplify the equation to:
V = nRT/P
Plugging in the values, we get:
V = (0.272 mol) (0.08206 L·atm/mol·K) (273.15 K) / 1 atm = 5.96 L
Therefore, we can expect 5.96 L of O2 to be produced.
To know more about reaction visit :-
https://brainly.com/question/11231920
#SPJ9
pls I need help me do this question.
is it possible for the properties of substances with a specifc type of bond to vary from what was observed in this lab? explain why or why not
Virtual labs provide a space where we can study the properties of compounds through virtual simulations. It is possible that the properties of a substance vary from what observed in virtual labs.
What is virtual lab?
A virtual lab provides a virtual space to study the structure and properties of substances by computer simulations. By the assistance of virtual labs we can conduct experiments and draw structure of different compounds.
Virtual labs provide an online platform of advanced options and tools to manage an experiment and 3D simulations of molecules of any bond type.
However these tools are mainly based on theoretical predictions and what we observe in real may differ due to various factors. First of all the environment we conduct an experiment and the materials quality etc. affect the result.
Moreover external factors such temperature, pressure etc. also influence on the result we obtain ultimately. The effect of these factors cannot be included accurately in virtual labs.
Therefore, the It is possible that the properties of a substance vary from what observed in virtual labs.
How many moles of sodium correspond to 1.56 x 10^21 atoms of sodium?
0.0025 moles correspond to 1.56 × 10²¹ atoms of sodium.
What is Mole?
The mole is an amount unit similar to familiar units like pair, dozen, gross, etc. It provides a specific measure of the number of atoms or molecules in a bulk sample of matter.
A mole is defined as the amount of substance containing the same number of atoms, molecules, ions, etc. as the number of atoms in a sample of pure 12C weighing exactly 12 g.
Given,
Atoms of sodium = 1.56 × 10²¹ atoms
we know that,
1 mole = 6.023 × 10²³ atoms
Number of moles of sodium = number of atoms ÷ 6.023 × 10²³
= 1.56 × 10²¹ atoms ÷ 6.023 × 10²³
= 0.0025 moles of sodium
Therefore, 0.0025 moles correspond to 1.56 × 10²¹ atoms of sodium.
Learn more about Moles, here:
https://brainly.com/question/20486415
#SPJ9
"2.00 L of a 1.50 M NaOH solution"
2.00 L of a 1.50 M NaOH solution is a chemical notation that describes a solution containing sodium hydroxide (NaOH) dissolved in water. Specifically, it indicates that there are 1.50 moles of NaOH dissolved per liter of solution for 3.00 moles of NaOH in 2.00 liters.
What is the molarity of the solution?Molarity, also known as molar concentration, measures the concentration of a solute in a solution. It is described as the number of moles of solute per liter of solution. The formula for calculating molarity is Molarity = moles of solute/volume of solution in liters.
What is the difference between molarity and normality?Molarity and normality are both measures of concentration in chemistry, but they are calculated differently and used for different types of reactions. Molarity (M) is defined as the number of moles of solute per liter of solution and is used to describe the concentration of a solution. Normality (N), on the other hand, normality (N) is defined as the number of gram-equivalent weights of solute per liter of solution.
To learn more about solutions, visit here:
https://brainly.com/question/30665317
#SPJ1
number 4, i just need an explanation on how to solve these—big test tomorrow
Cl2 is the limiting reactant and the unreacted Al is 1.7 g
What is the limiting reagent?We know that the reaction equation is;
2Al + 3Cl2 ------> 2AlCl3
Now we know that;
Number of moles of Al = 2.7/27 g/mol
= 0.1 moles
Number of moles of Cl2 = 4.0 g/71 g/mol
= 0.056 moles
If 2 moles of Al reacts with 3 moles of Cl2
0.1 moles of Al reacts with 0.1 * 3/2
= 0.15 moles
The Cl2 is the limiting reactant
Now;
2 moles of Al reacts with 3 moles of Cl2
x moles of Al reacts with 0.056 moles of Cl2
x = 0.037 moles
Moles of unreacted Al = 0.1 moles - 0.037 moles
= 0.063 moles
Mass of unreacted Al = 0.063 moles * 27 g/mol
= 1.7 g
Learn more about reaction:https://brainly.com/question/28984750
#SPJ1
Question 8 (2 points)
A gas occupies 50.5 mL at 72 degrees Celcius and 3 atm. Find the new volume of this gas at 5 degrees Celcius and 2 atm.
Ex: 92 cm
The 25 is the new volume of this gas at 5 degrees Celcius and 2 atm.
What is temperature ?
Temperature is a unit used to represent how hot or cold something is. It can be stated using the Celsius or Fahrenheit scales, among others. Temperature shows which way heat energy will naturally flow, i.e., from a hotter (body with a higher temperature) to a colder (body with a lower temperature) (one at a lower temperature).
What is volume ?
Space is occupied by every three-dimensional object. Its volume serves as a gauge for this area. The area contained by an object's limits in three-dimensional space is referred to as its volume. Another name for it is an object's capacity.
Therefore, 25 is the new volume of this gas at 5 degrees Celcius and 2 atm.
Learn more about temperature from the given link.
https://brainly.com/question/25677592
#SPJ1
What does wave frequency measure?
A. the distance between two corresponding points on ALTERNATING waves
B. the number of waves that pass through a fixed point in a certain amount of time
C. the distance between two corresponding points on ADJACENT waves
D. the height of the wave in relation to the center line
Answer:
B. the number of waves that pass through a fixed point in a certain amount of time. Wave frequency measures how many waves (or cycles) of a wave pattern pass through a fixed point per unit of time, usually measured in hertz (Hz).
Explanation:
Wave frequency measures the number of waves that pass through a fixed point in a certain amount of time. This is also known as the number of cycles per second, measured in hertz (Hz). It is a fundamental property of waves, including sound waves, electromagnetic waves, and water waves.
For example, if a sound wave has a frequency of 440 Hz, it means that 440 cycles of the wave occur in one second. Similarly, if an electromagnetic wave has a frequency of 5 GHz (5 billion hertz), it means that the wave oscillates 5 billion times per second.
Wave frequency is important in understanding many aspects of waves, including their behavior, interactions with other waves and matter, and how they are detected and measured. It is also related to other wave properties, such as wavelength and wave speed, through mathematical relationships.
When something gets Cold, it gains cold energy.
When something gets cold, it absorbs energy in the form of cold energy from its environment. This energy is released as heat when the object is heated up again.
What is energy?Energy is the ability to do work. It is the capacity to cause change, move objects, and make things happen. Energy can come from different sources, such as the sun, fossil fuels, and nuclear power. Energy can also be stored, such as in batteries, food, or chemical compounds. It is a fundamental part of the universe, and it is necessary for life to exist. Energy can take many forms, such as kinetic, potential, thermal, chemical, electromagnetic, and nuclear energy. Kinetic energy is energy that is in motion, such as a moving car or a flying bird. Potential energy is energy stored in an object due to its position or composition, such as a rock at the top of a hill. Thermal energy is the energy of heat, such as the heat from a fire.
To learn more about energy
https://brainly.com/question/24772394
#SPJ1
the maximun number of electrons that a 3p sublevel can hold is ?
The 3p subshell can carry a maximum of 6 electrons, which is the maximum number an electron can be held by a 3p sublevel.
What types of things are electrons?The electron is the lowest atom-forming particle or a carrier of such a negative charge. The protons in an atom that is neutral are all the same. For example, the hydrogen atom only contains one proton and one electron. The uranium atom is unique due to its 92 protons & 92 electrons.
Why are there electrons in an atom?The negatively charged atom's electrons are responsible for this. An atom's total negative charge, which is produced by all of its electrons, counteracts the positive electrical charge of a protons inside the atomic nucleus.
To know more about electrons visit:
https://brainly.com/question/28977387
#SPJ1
Complete the reaction, balance the reaction, and indentify the gas formed
HCI + CuSO3 ------
The complete and balanced reaction equation is: CuSO3(s) -> CuO(s) + SO2(g)
Balancing chemical reactionsThe reaction between HCI (hydrochloric acid) and CuSO3 (copper(II) sulfite) is not a valid chemical equation.
Copper(II) sulfite is not a stable compound, and it decomposes readily in air to form copper(II) oxide (CuO) and sulfur dioxide (SO2) according to the following equation:
CuSO3(s) -> CuO(s) + SO2(g)
The balanced equation for this reaction is: https://brainly.com/question/14258973
CuSO3(s) -> CuO(s) + SO2(g)
The gas formed in this reaction is sulfur dioxide (SO2).
More on balancing reactions can be found here: https://brainly.com/question/14280002
#SPJ1
Greg's doctor has ordered a PET scan of his heart. In radiological imaging such as PET or CT scans, dosages of pharmaceuticals are based on body mass. If Greg weighs 216-lb, what is his body mass in grams? Please make sure to include the correct unit symbol with the answer choice.
The doctor would then be aware of Greg's weight of 108.6 kg.
What safety measures are necessary for a PET-CT scan?Typically, you won't be allowed to eat or drink for six hours prior to the procedure, although you can drink water. Moreover, you should refrain from intense activity for 24 hours before to your consultation. It's wise to dress comfortably and loosely.
What distinguishes a CT scan from a PET-CT scan?The internal organs and tissues of your body are depicted in great detail by a CT scan. A PET scan can be more sensitive than other imaging procedures and can detect aberrant activity. Also, it can cause your body to alter sooner. PET-CT scans are used by doctors to reveal more details about the cancer.
To know more about PET scan visit:-
https://brainly.com/question/1343244
#SPJ1
A bubble of helium gas has a volume of 0.650 mL near the bottom of a large aquarium where the pressure is 1.54 atm
and the temperature is 12°C.
Determine the bubble's volume upon rising near the top where the pressure is 1.0l atm and
116°
The bubble's volume upon rising near the top of aquarium where the pressure is 1.01 atm and temperature is 116°C is 0.869 mL
What is meant by volume of gas?Volume of gas can be defined as the space occupied by gaseous particles at standard temperature and pressure conditions.
As we know, (P₁V₁)/T1 = (P₂ V₂)/ T₂
P₁, V₁, and T₁ are initial pressure, volume, and temperature, and P₂, V₂, and T₂ are final pressure, volume, and temperature.
T₁ = 12°C + 273.15 = 285.15 K
T₂ = 116°C + 273.15 = 389.15 K
(P₁V₁) /T₁ = (P₂V₂)/T₂
(1.54 atm × 0.650 mL) / 285.15 K = (1.01 atm × V₂) / 389.15 K
So, V₂ = (1.54 atm × 0.650 mL × 389.15 K) / (1.01 atm × 285.15 K)
V₂ = 0.869 mL
Therefore, the bubble's volume upon rising near the top of the aquarium where the pressure is 1.01 atm and the temperature is 116°C is 0.869 mL
To know more about gas volume, refer
https://brainly.com/question/27100414
#SPJ1
what is the volume of 225 moles of a gas at STP
Answer:
At STP (Standard Temperature and Pressure), the temperature is 273.15 K (0°C) and the pressure is 1 atm. The molar volume of any gas at STP is 22.4 L/mol.
Explanation:
Therefore, the volume of 225 moles of gas at STP would be:
V = n * V_m
where
V = volume of the gas
n = number of moles of the gas
V_m = molar volume of the gas at STP = 22.4 L/mol
Substituting the values, we get:
V = 225 mol * 22.4 L/mol
V = 5040 L
So the volume of 225 moles of a gas at STP would be 5040 liters.
Answer:
5049 L
Explanation:
got the answer correct
How many grams are in 8.18 x 1023 atoms of nickel (Ni)?
Answer:
gram of Ni = 79.8g
Explanation:
Mark as brainliest
Which of the following combinations will result in a precipitate, according to solubility rules?
Potassium iodide (KI) and silver nitrate (AgNO3)
Ammonium chloride (NH4Cl) and sodium hydroxide (NaOH)
Sodium nitrate (Na2CrO4) and barium chloride (BaCl2)
Calcium sulfate (CaSO4) and sodium carbonate (Na2CO3)
Silver nitrate, sodium hydroxide, ammonium chloride, and potassium iodide (KI, AgNO3, NH4Cl) (NaOH).
What does chloride in a blood test indicate?One of your blood's electrolytes is chloride. Chloride blood tests verify that you have the right amounts of chloride within your blood for good health. Chloride levels in the blood can be abnormal for a variety of reasons, including dehydration, vomiting, and certain medical diseases.
What does a low chloride blood test mean?A measurement of a chloride concentration is the blood chloride value. Specifically, the number of milliequivalents of chloride per liter. Hypochloremia, then, is a condition in which your blood chloride concentration is below normal. Hyperchloremia is the medical term for having excessive levels of chloride within your blood.
To know more about chloride visit:
https://brainly.com/question/13211879
#SPJ1