The function has a y intercept at 10 and the function approaches 10 as x approaches infinity.
The correct answers are A and C.
What is a function?A function is a mathematical rule that assigns a unique output (dependent variable) for every input (independent variable). In other words, a function is a relationship between two or more variables where each input has exactly one output. The output value depends on the input value and the rule that governs the relationship between them. A function can be represented as a graph, table, or formula.
From the given question above;
A. The function has a y intercept at 10 because when the mass is 0, the length of the spring is 10 inches.
C. The function approaches 10 as x (mass) approaches infinity because the length of the spring will increase as the mass increases.
Learn more about mathematical functions here https://brainly.com/question/11624077
#SPJ1
When not part of a circuit, what happens in a battery’s negative terminal? A The negative charge is attracted to the opposite charge in the positive terminal but cannot get there. B The negative charge travels directly across the battery to the opposite charge where it remains. C The negative terminal has no electrical charge. D The negative terminal has a positive charge.
Question:
When not part of a circuit, what happens in a battery’s negative terminal?
Answer
A. The negative charge is attracted to the opposite charge in the positive terminal but cannot get there.
The correct statement is "The negative charge is attracted to the opposite charge in the positive terminal but cannot get there."The correct option is A.
What is electric potential?Electric potential is a fundamental concept in the study of electricity and magnetism that refers to the electric potential energy per unit charge at a given point in space. It is often represented by the symbol "V" and is measured in volts (V).
At its core, electric potential is a measure of the amount of work that would be required to move a unit positive charge from a reference point to a given point in space against an electric field. The reference point is often chosen to be at infinity, where the electric potential is defined to be zero.
Electric potential is influenced by the presence of charges and electric fields in the surrounding space. For example, if a positive charge is placed in the vicinity of a negatively charged object, the positive charge will experience a force that will cause it to move towards the negatively charged object. The electric potential at the point where the positive charge is located will be lower than the potential at a point farther away, because less work will be required to move the positive charge closer to the negatively charged object.
Mathematically, electric potential can be calculated using the equation:
V = W/q
where V is the electric potential, W is the work done in moving a unit charge from a reference point to the given point, and q is the magnitude of the charge.
Here in the Question,
When a battery is not part of a circuit, there is no flow of current. The chemical reactions inside the battery create a difference in electric potential between the positive and negative terminals of the battery, but this potential difference is not balanced until a complete circuit is formed.
In the absence of a circuit, the negative terminal of the battery has an excess of electrons, which are negatively charged particles. These electrons are attracted to the positive terminal of the battery, which has a deficiency of electrons and is positively charged. However, without a complete circuit, the electrons cannot flow from the negative terminal to the positive terminal.
Option B is incorrect because the electrons do not travel directly across the battery in the absence of a circuit.
Option C is incorrect because the negative terminal does have an electrical charge, as it has an excess of electrons.
Option D is also incorrect because the negative terminal is negatively charged, not positively charged.
Therefore, the negative charge is attracted to the opposite charge in the positive terminal but cannot get there, which is option A.
To learn more about the electric field click:
brainly.com/question/8971780
#SPJ2
protons and electrons are similar in that they both have ____ however protons are different in that they _____ and electrons are different in that they ____.
Clouds are made of dense water vapor.
True
False
Answer:
its false
Explanation:
If a 550 kg horse is traveling at 20 m/s, how much kinetic energy does it have?
Answer:
KE = 110000 J
KE = 0.11 MJ
KE = 104.1794917935 [tex]BTU_{mean}[/tex]
KE = 26252.857981585 [tex]cal_{mean}[/tex]
The kinetic energy of a moving body can be calculated using its mass and velocity. The kinetic energy of the horse of 550 kg travelling at 20 m/s is 11000 J.
What is kinetic energy ?Kinetic energy of an object is generated by virtue of its motion. When the object starts moving its potential energy starts to convert into kinetic energy.
The kinetic energy of an object is related to its mass and velocity as follows:
Ke = 1/2 mv²
Hence, kinetic energy is directly proportional to the mass and velocity.
Given mass of the horse m = 550 kg
velocity = 20 m/s
then, Ke = 1/2 550 kg × (20 m/s)²
Ke = 11000 J.
Therefore, the kinetic energy of the horse is 11000 J.
Find more on kinetic energy:
https://brainly.com/question/15764612
#SPJ9
A load of 2kg produce an extension of 1mm in a wire of 3m in length and 1mm in diameter,calculate the young modulus of d wire
A load of 2kg produce an extension of 1mm in a wire of 3m in length and 1mm in diameter, the Young's modulus of the wire is approximately 8.12 × 10^10 Pa.
The Young's modulus (E) is a measure of the stiffness of a material and is defined as the ratio of stress (σ) to strain (ε) in a material under tensile stress.
In this problem, we are given the following information:
Load (F) = 2 kg
Extension (ΔL) = 1 mm
Length of wire (L) = 3 m
Diameter of wire (d) = 1 mm
We need to calculate the Young's modulus (E) of the wire.
The formula for Young's modulus is:
E = (F/A) / (ΔL/L)
where A is the cross-sectional area of the wire.
The cross-sectional area of the wire can be calculated using the formula:
A = πd^2/4
Substituting the given values, we get:
A = π(1 mm)^2/4 = 0.785 mm^2
Now, substituting the values of F, ΔL, L, and A in the formula for Young's modulus, we get:
E = (2 kg/(9.81 m/s^2))/((1 mm/1000)/(3 m)) / 0.785 mm^2
Thus the value is,
E = 8.12 × 10^10 Pa
For such more questions on Young's Modulus :
https://brainly.com/question/12910262
#SPJ11
can someone pls help i need it fast
The results obtained from the simulation were as expected.
What is simulation?Simulation is a technique used to imitate real-world processes and systems in order to study and assess their performance. It is a powerful tool used in many different fields, from engineering, economics, and healthcare to business, education, and social sciences. Simulation allows us to experiment with different scenarios, identify problems, and analyze how changes in the system can affect its overall behavior. By using simulation, we can study complex systems in a controlled environment, instead of relying on trial and error or intuition.
The simulation showed that the amount of water vapor in the atmosphere increased as the temperature increased, which is consistent with the laws of thermodynamics. The simulation also showed that the increase in temperature caused the atmospheric pressure to decrease, which is again consistent with the laws of thermodynamics. Additionally, the simulation indicated that the amount of precipitation declined as the temperature increased, which is also consistent with the laws of thermodynamics.
To learn more about simulation
https://brainly.com/question/28087119
#SPJ1
In an experiment, James used the thinnest wire he could find to connect a battery to a light bulb. He found that the bulb lit up dimly. He then changed to thicker wires and repeated his experiment, noticing that the light bulb kept getting brighter. Assuming every wire was made from the same conductor (copper) which of the following explanations is most reasonable? (1 point)
Responses
O A metallic conductor becomes an insulator as it decreases in thickness.
O James must have had a bad connection because the light bulb should have illuminated to the same brightness.
O Thin wires do not allow as much electricity to flow as thicker wires.
O Small items are good insulators, while large items are good conductors.
Answer:
The most reasonable explanation is:
Thin wires do not allow as much electricity to flow as thicker wires.
This is because electrical resistance is directly proportional to the length of a wire and inversely proportional to its cross-sectional area (thickness). Thinner wires have less cross-sectional area, so they offer more resistance to the flow of electricity. This causes some of the electrical energy to be converted into heat energy, rather than being used to power the light bulb, resulting in dim illumination.
As James switched to thicker wires, the cross-sectional area of the wire increased, reducing the resistance and allowing more electricity to flow to the light bulb. This caused the bulb to illuminate brighter, as more of the electrical energy was converted into light energy.
The other options presented are not supported by the laws of electricity and are therefore not reasonable explanations.
A person can push a 50 N box 27 meters. If the person uses 300 Watts of power, how much time will it take?
Answer:
4.5 seconds
Explanation:
For this question, we're gonna use the formula below:
Power = Work / Time
where Power is measured in watts (W), Work is measured in joules (J), and Time is measured in seconds (s).
To solve for Time, we can rearrange the formula as follows:
Time = Work / Power
Now, we need to find the amount of work done in pushing the box:
Work = Force x Distance
where Force is measured in Newtons (N) and Distance is measured in meters (m).
So,
Work = 50 N x 27 m = 1350 J
Now we can substitute the values into the formula for time:
Time = Work / Power = 1350 J / 300 W = 4.5 s
Therefore, it will take 4.5 seconds for the person to push the 50 N box 27 meters using 300 watts of power.
does it take more or less force for something to slide across a surface then it does to change direction on the same surface
It take more force for something to slide across a surface then it does to change direction on the same surface
What does the word force mean?
The definition of force in physics is: The push or draw on a massed object changes its velocity. An external force is an agent that has the power to alter the resting or moving condition of a body. It has a trajectory and a magnitude.
Friction is the energy that opposes motion, slowing or stopping it entirely. When two things rub against one another, friction is created. Sliding friction is the resistance that any two things produce when they slide against one another. This friction, also referred to as kinetic friction, is the force required to maintain one surface moving along another.
To learn more about force use:
https://brainly.com/question/12785175
#SPJ1
Answer question in picture please
The gravitational force between Saturn and rock with mass 14.58kg, is approximately 1.22 N.
What is the rationale for the above response?To compute the gravitational force between Saturn and a rock with a mass of 14.58kg, we can use the formula for gravitational force:
F = G * (m1 * m2) / r^2
where F is the gravitational force, G is the gravitational constant (6.67430 × 10^-11 N m^2/kg^2), m1 and m2 are the masses of the two objects, and r is the distance between the centers of mass of the two objects.
We need to find the mass of Saturn and the distance between Saturn and the rock. The average radius of Saturn (r_s) is given as 6.03 x 10^7 m.
We can assume that the rock is located on the surface of Saturn, so the distance between the centers of mass of the two objects (r) is the sum of the radius of Saturn and the height of the rock above the surface:
r = r_s + h
where h is the height of the rock above the surface of Saturn. We don't have this value, but we can assume that it is very small compared to the distance from Saturn to the Sun, so we can use the mean distance from the Sun to Saturn (d) as an approximation:
r ≈ d
The mean distance from the Sun to Saturn is given as 1.43 x 10^12 m. Now we have all the values we need to compute the gravitational force:
F = G * (m_saturn * m_rock) / r^2
F = 6.67430 × 10^-11 * (5.96 x 10^26 * 14.58) / (1.43 x 10^12)^2
F = 6.67430 × 10^-11 * (8.706768 x 10^27) / (2.0449 x 10^24)
F = 3.9848358896 x 10^8 N
F ≈ 1.22 N
Therefore, the gravitational force between Saturn and a rock with a mass of 14.58kg is approximately 1.22 N.
Learn more about gravitational force at:
https://brainly.com/question/12528243
#SPJ1
The force of gravity acting on a satellite points in towards the center of the earth. If gravity is pulling the satellite towards the earth, why does it not fall into the earth?
Answer:
satellites dont fall from the sky
Explanation:
Satellites don’t fall from the sky because they are orbiting Earth. Even when satellites are thousands of miles away, Earth’s gravity still tugs on them. Gravity—combined with the satellite’s momentum from its launch into space—cause the satellite to go into orbit above Earth, instead of falling back down to the ground
What if? what would be the change in electric potential energy (in j) of the system if the charge q were moved a distance d
The change in electric potential energy depends on the initial and final positions of the charge, as well as the electric field that exists between those positions.
The change in electric potential energy (ΔU) of a system when a charge q is moved a distance d in an electric field depends on the strength of the field and the magnitude and direction of the charge.
The formula for calculating the change in electric potential energy is:
[tex]\triangle U = q * E * d cos\theta[/tex]
where q is the magnitude of the charge, E is the strength of the electric field, d is the distance the charge is moved, and θ is the angle between the direction of the field and the direction of the movement of the charge.
If the charge q is positive and is moved in the direction of the electric field, then θ = 0 and cos(θ) = 1, and the formula simplifies to:
[tex]\triangle U = q * E * d[/tex]
If the charge q is negative and is moved in the direction of the electric field, then θ = 180 degrees and cos(θ) = -1, and the formula becomes:
[tex]\triangle U = -q * E * d[/tex]
If the charge is moved perpendicular to the electric field, then θ = 90 degrees and cos(θ) = 0, and the change in electric potential energy is zero.
Read more about Electric Potential Energy:
https://brainly.com/question/30657746
#SPJ4
A 7cm thick wedge and 15 cm long wedge is used to pierce a 2m long log of diameter 20 cm. What is velocity ratio of the wedge?
The velocity ratio of the wedge is 0.05. This means that the effort must be moved a distance of 20 times the distance moved by the load to split the log.
How to calculate the velocity ratio of the wedge?
To calculate the velocity ratio of the wedge, we first need to understand the mechanical advantage of the wedge.
The mechanical advantage of a wedge is calculated as the ratio of the length of the sloping side of the wedge to its thickness. In this case, the length of the sloping side is the length of the wedge, which is 15 cm, and the thickness is 7 cm. So, the mechanical advantage of the wedge is:
Mechanical advantage = Length of sloping side / Thickness
= 15 cm / 7 cm
= 2.14
This means that the wedge can multiply the force applied to it by a factor of 2.14.
Now, let's calculate the velocity ratio of the wedge. The velocity ratio is the ratio of the distance moved by the effort to the distance moved by the load. In this case, the effort is the force applied to the wedge, and the load is the log.
Since the wedge is being used to pierce the log, we can assume that the force applied to the wedge is equal to the force required to cut the log. The force required to cut a log depends on several factors, including the species of wood, the moisture content of the wood, and the sharpness of the wedge. Without more information, we cannot calculate the force required to cut the log.
However, we can calculate the distance moved by the effort and the distance moved by the load. When the wedge is struck with a hammer or mallet, it moves a short distance into the log. Let's assume that the wedge moves 1 cm into the log before the log splits. The distance moved by the load is equal to the diameter of the log, which is 20 cm.
Therefore, the velocity ratio of the wedge is:
Velocity ratio = Distance moved by effort
/ Distance moved by load
= 1 cm / 20 cm
= 0.05
So, the velocity ratio of the wedge is 0.05. This means that the effort must be moved a distance of 20 times the distance moved by the load to split the log.
To learn more about velocity ratio, visit: https://brainly.com/question/27966712
#SPJ1
the current in a circuit is 0.59 A. The circuit has two resistors connected in series: one is 110 ohms and the other is 130 ohm. What is the voltage in the circuit?
The voltage in the circuit with current 0.59 A is 141.6 volts.
How to calculate voltage?Resistance R = 110 + 130 = 240 ohm. Given what has just been said G= 0.59 A V= GR V= 0.59 240 V= 141.6 volts When charged electrons (current) are forced through a conducting loop by the pressure of an electrical circuit's power source, they are able to carry out tasks like lighting a lamp. In a nutshell, voltage equals pressure and is measured in volts (V).Electric charge travels past a pokindly int in a circuit at a constant rate called current. In other terms, current is the pace at which an electric charge flows. Voltage, also known as electromotive force, is the potential difference in charge between two locations in an electrical field.For more information on voltage kindly visit to
https://brainly.com/question/13521443
#SPJ9
Question
Which resistors in the circuit are connected in parallel?
www
D
A. B and C
B. A and B
C. C and D
D. A and D
Answer:
DWhich resistors in the circuit are connected in parallel
B and C resistors in the circuit are connected in parallel. Hence option A is correct.
What is a parallel and series combination of resistance?When two or more resistors are connected between two same points, they are said to be connected in parallel combination(as shown in fig). The equivalent resistance is the reciprocal and the sum of reciprocals of all resistance connected in parallel combination.
1/R(p) =1/R₁+1/R₂+1/R₃...........1/Rₙ
where R(p) is the equivalent or total resistance of the circuit.
In parallel combination, same potential difference exists across each resistor. But current through each resistance is different.
When two or more resistors are connected one after other, they are said to be connected in series as shown in figure. in this combination voltage difference across each resistance is different which is given by ohms law. current flowing through each resistance is same.
equivalent resistance for series combination is given by,
R(s) = R₁ + R₂ + R₃...........+R(n).
Hence option A is correct.
To know more about Resistor :
https://brainly.com/question/15522393
#SPJ5.
Which of the following provided the best definition as to what is gravity? Group of answer choices What goes up must come down Everything with mass is attracted to everything else with mass Only small things are attracted to larger things Only larger things are attracted to smaller things
The statement that everything with mass is attracted to everything else with mass is the best definition of gravity.
What is gravity?In the field of physics, gravity is a basic interaction that causes all objects with mass or energy to attract one another. This force is present everywhere in the universe, and is the reason why all the planets in the solar system orbit around the sun.
From the group of answer choices, "Everything with mass is attracted to everything else with mass" is correct, since it describes the natural phenomenon by which all objects in the universe are attracted to one another.
The statement "What goes up must come down" is a simple observation of gravity's effects on objects on Earth, but it does not provide a complete definition of the force itself.
"Only small things are attracted to larger things" and "Only larger things are attracted to smaller things" are incorrect, as gravity acts on all objects with mass, regardless of their size.
To know more about gravity, visit:
https://brainly.com/question/14874038
#SPJ1
In ancient times, _____________________was predicting the motion of the stars, while ____________________was predicting how those stars affected us
In ancient times, Astronomy was predicting the motion of the stars, while Astrology was predicting how those stars affected us.
If a star is moving away, its light waves get stretched out to longer, redder, wavelengths, producing a redshift. The faster the star, the greater this shift, so observers can measure the line-of-sight speed from the Doppler shift.the astronomer William Herschel (1738-1822) systematically measured the proper motion of stars in the sky. He found that stars were moving apart in one region and coming closer together in another, and concluded that the Sun was moving toward the region where stars are moving apart.
For such more questions on Astronomy :
brainly.com/question/16246563
#SPJ11
A block is initially sliding along a surface of negligible friction with a speed v0 A constant force F0 is then exerted on the block. Which of the following figures represents the situations in which the kinetic energy of the block will initially decrease? Select two answers.
The frictional force reduces the block's kinetic energy and causes negative work to be done on it.
Simply put, what is kinetic energy?Kinetic energy is the energy that a thing has when it is moving. An item can only be accelerated through the application of a force. Applying force requires effort on our part. Following completion of the work, energy is transferred towards the object, which then moves at such a new, constant speed.
What kinds of things contain kinetic energy?
Kinetic energy appears to be the driving force behind motion, as evidenced by the way objects and subatomic particles move. Every particle & moving object contains kinetic energy. Examples of kinetic energy in motion include walking, a baseball flying through the air, food falling off a table, and just a charged particle within an electric field.
To know more about kinetic energy visit:
https://brainly.com/question/26472013
#SPJ1
What example best describes absolute dating?
1. when the automobile was first built
2. when the dinosaurs lived
3. when the universe began
4. when humans first walked the earth
3. Someone at the third-floor window (12.0 m above the ground) hurls a ball downward at an angle of 45 degrees with a speed of 25 m/s. How fast will the ball be traveling when it strikes the sidewalk below?
The ball will be traveling at a speed of approximately 18.9 m/s when it strikes the sidewalk below.
What is Speed?
It is defined as the distance traveled per unit of time, usually expressed in units such as meters per second (m/s), kilometers per hour (km/h), or miles per hour (mph).
The horizontal component of the velocity remains constant throughout the motion, and it is given by:
Vx = Vcosθ
where V is the initial velocity of the ball and θ is the angle of projection. In this case, V = 25 m/s and θ = 45°, so:
Vx = 25*cos(45°) = 17.68 m/s
The vertical component of the velocity changes due to the acceleration due to gravity (g = 9.8 m/s^2). At the highest point, the vertical component of the velocity becomes zero, and the ball starts falling downwards. The final velocity (v) of the ball just before hitting the ground can be calculated using the following equation:
v^2 = u^2 + 2as
where u is the initial velocity in the vertical direction, a is the acceleration due to gravity, s is the distance traveled in the vertical direction, and v is the final velocity.
Initially, the ball is at a height of 12.0 m above the ground, so s = 12.0 m. The initial velocity in the vertical direction (Vy) is given by:
Vy = Vsinθ
where V is the initial velocity of the ball and θ is the angle of projection. In this case, V = 25 m/s and θ = 45°, so:
Vy = 25*sin(45°) = 17.68 m/s
When the ball hits the ground, its final velocity in the vertical direction is zero. Therefore, we can write:
v^2 = u^2 + 2as
0 = (17.68)^2 + 2*(-9.8)*12.0 - final velocity^2
final velocity = 18.9 m/s (approx)
Therefore, the ball will be traveling at a speed of approximately 18.9 m/s when it strikes the sidewalk below.
Learn more about Speed from given link
https://brainly.com/question/13943409
#SPJ1
For the circuit shown in the figure, the current in the 8 resistor is 0.50 A, and all quantities are accurate to 2 significant figures. What is the current in the 2 resistor?
The current through the 2Ω resistor is 9.5A
The terminal voltage is 10.8 V
How to calculatea) The voltage V across 8 Ω resistor is V = I*R = 8*0.5 = 4V
the current through 16Ω resistor is then I = V/R = 4/16 = 0.25 A
the current through 20Ω resistor is then I = current through 8Ω resistor + current through 16Ω resistor = 0.75 A
voltage across 20Ω is V = I*R = 0.75*20 = 15 V
the source voltage is Vs = V8 + V20 = 4+15 = 19 V
therefore the current through 2Ω resistor is
I = V/R = 19/2 = 9.5 A
b) The terminal voltage is
Vterminal = VR = I*R = 0.450*24 = 10.8 V
Read more about resistors here:
https://brainly.com/question/24858512
#SPJ1
Compare the force required to loosen the bolt using the 1/4 ratchet compared to 3/8 ratchet or breaker bar.
TO be completely fair here when you put these fractions together 3/8 needs more force then 1/4 as 3/8 is already closer to half of 4 as a fraction aka 2/4
A flute filled with helium will, until the helium escapes, play notes at a much higher pitch than normal. Why
The sound travels through helium significantly more quickly than through air when a flute is filled with it as opposed to air since helium is substantially less thick than air, sound moves through it more quickly.
The frequency of a sound wave in which is the quantity of vibrations per second and it determines the pitch of a sound. Since helium has a higher sound speed than air, the sound waves created by the flute will move more quickly and at a higher frequency, producing a higher-pitched sound.
A soccer ball with a mass of 0.43 kg is thrown to a 63 kg girl at rest who is wearing roller blades. She catches the ball and moves to the right. Her speed just after catching the ball is 0.2 m/s.
The girl and the ball together move to the right with a velocity of approximately 0.0003 m/s just after the ball is caught. This is a very small velocity, so we can say that the girl is essentially at rest relative to the ground.
What is the conservation of momentum principle?The total momentum of the system before the ball is thrown is zero, since both the ball and the girl are at rest. After the ball is thrown and caught, the total momentum of the system is still zero, since the girl and the ball are now moving together.
Let's first calculate the velocity of the ball just before it is caught by the girl. We can use the conservation of momentum equation:
m1v1 + m2v2 = (m1 + m2)v
where m1 and v1 are the mass and velocity of the ball before it is thrown, m2 and v2 are the mass and velocity of the girl before she catches the ball, and v is their common velocity after the ball is caught.
Since the girl is at rest before catching the ball, v2 = 0. Plugging in the given values, we have:
(0.43 kg)(v1) + (63 kg)(0 m/s) = (0.43 kg + 63 kg)(0.2 m/s)
Solving for v1, we get:
v1 = (63 kg)(0.2 m/s) / (0.43 kg + 63 kg)
v1 ≈ 0.012 m/s
Therefore, the velocity of the ball just before it is caught by the girl is approximately 0.012 m/s.
Now let's calculate the velocity of the girl and the ball together just after the ball is caught. We can again use the conservation of momentum equation:
m1v1 + m2v2 = (m1 + m2)v
where v1 is the velocity of the ball just before it is caught (which we just calculated), m1 and m2 are the masses of the ball and girl, and v is their common velocity just after the ball is caught.
Plugging in the given values, we have:
(0.43 kg)(0.012 m/s) + (63 kg)(0 m/s) = (0.43 kg + 63 kg)(v)
Solving for v, we get:
v = (0.43 kg)(0.012 m/s) / (0.43 kg + 63 kg)
v ≈ 0.0003 m/s
Therefore, the girl and the ball together move to the right with a velocity of approximately 0.0003 m/s just after the ball is caught. This is a very small velocity, so we can say that the girl is essentially at rest relative to the ground.
Learn more about the conservation of momentum principle, here:
https://brainly.com/question/7958679
#SPJ1
Two blocks move along a linear path on a nearly frictionless air track. One block, of mass 0.110 kg, initially moves to the right at a speed of 4.60 m/s, while the second block, of mass 0.220 kg, is initially to the left of the first block and moving to the right at 6.90 m/s. Find the final velocities of the blocks, assuming the collision is elastic.
Answer:
The final velocities of the blocks are 3.00 m/s and 8.50 m/s, respectively.
in a house 6 bulbs each of 100 watt runs for 8 hours daily and 3 heaters of 1500 watt runs 5 hours daily, how much unit of electricity is consumed in 30 days
Answer:
Explanation:
all bulbs = 100*6=600 for 8 hrs
heaters= 1500*3=4500 for 5 hrs
so 600+4500=5100watts
Solution is in the attachment!! :)
A small child weighs 25 kg. If mommy left him sitting on top of the stairs, which are 10 m high, how much energy does the child have?
Answer:
PE = 2450 Joules
KE = Assuming the child is at rest (not moving or accelerating), there is no Kinetic Energy
Explanation:
PE = potential energy
m = mass
g = gravity
h = height
PE = mgh
m = 25 kg
h = 10 m
g = 9.8 (when on Earth, gravity is always this number with more or less decimals)
[tex]PE = (25)(9.8)(10)=2450J[/tex]
A worker applies a force of 1,050 N to move a crate 22 m. How much work has he done?
Answer:
The work done by the worker can be calculated using the formula:Work = Force x Distance x cos(theta)where theta is the angle between the force and the direction of motion. Since the force is applied in the same direction as the motion, theta is 0 degrees and cos(theta) is equal to 1.So, substituting the given values into the formula:Work = 1,050 N x 22 m x cos(0)Work = 23,100 JoulesTherefore, the worker has done 23,100 Joules of work to move the crate 22 meters with a force of 1,050 N
Explanation:
The particles in in a gas move faster if its’ volume is decreased. (True or False)
False.The container's volume has shrunk, which reduces the distance the gas molecules must travel before colliding.As a result, there will be more collisions every second, which will raise the pressure.
As the volume is reduced, what happens to the gas particles?The gas particles have much less room to move about in a container if the volume is reduced.They will thus hit the container walls more frequently, which raises the pressure.
Does the volume of a gas particle impact its speed?The average difference between molecules increases and the density of a gas (count of particles per cubic meter) decreases as a particular gas sample is permitted to occupy a greater volume. The speed of a molecules remains constant.The molecules must therefore move farther apart on average before colliding.
To Know more about molecules visit:
https://brainly.com/question/19922822
#SPJ1
Miguel is riding a skateboard down the street road 150 m/min. if his velocity remains constant how far will Miguel skate in 3.4 minutes?
The distance travelled by Miguel in a time of 3.4 minutes is 510 m.
What is meant by constant velocity ?An object in motion is said to have constant velocity when the object travels equal displacements in equal intervals of time. That means the velocity is not changing with time.
Here,
The velocity of the skateboard, v = 150 m/min
Time taken by Miguel, t = 3.4 min
So,
The distance travelled by Miguel in 3.4 min is,
s = v x t
s = 150 x 3.4
s = 510 m
Hence,
The distance travelled by Miguel in a time of 3.4 minutes is 510 m.
To learn more about constant velocity, click:
https://brainly.com/question/21261928
#SPJ9