scale. The scientists have also found the following three pieces of evidence. 1. Evidence of dinosaur fossils were found in rock layers older than the iridium layer. 2. Evidence of dinosaur fossils were NOT found in rock layers younger than the iridium layer. 3. Iridium is not found in high concentrations in Earth layers but is abundant in asteroids. What does this information most likely show about Earth's history and dinosaurs? A. Iridium was produced on Earth's surface by sedimentation and helped dinosaurs thrive on Earth. B. A large asteroid collided with Earth and helped dinosaurs thrive on Earth. C. A large asteroid collided with Earth and killed off the dinosaurs. D. Iridium was produced on Earth's surface by sedimentation and killed off the dinosaurs.

Answers

Answer 1

je ne sais vraiment pas

ur teacher is not ok


Related Questions

Why must the fluid thioglycollate tube be stabbed with the inoculation tool to the bottom of the tube during the bacteria transfer process? - so oxygen can be spread throughout the tube - so both the serobic and anaerobic areas are inoculated - so only the anaerobic areas inoculated - so only the aerobic area of the tube inoculated

Answers

Answer:

so oxygen can be spread throughout the tube

Explanation:

The fluid thioglycollate tube should be stabbed with the inoculation tool to the bottom of the tube during bacterial transfer to ensure that both aerobic and anaerobic areas are inoculated.

This is important because the thioglycollate broth is a differential medium that supports the growth of a wide range of bacteria, including those that require oxygen to grow and those that can grow without oxygen.

By stabbing the bottom of the tube, oxygen can be distributed throughout the medium, allowing both aerobic and facultative anaerobic bacteria to grow. This ensures that the test is sensitive to both aerobes and facultative anaerobes, allowing for accurate identification of bacterial growth characteristics.

In summary, stabbing the fluid thioglycollate tube to the bottom ensures that both aerobic and anaerobic areas are inoculated, leading to accurate identification of bacterial growth characteristics.

For more questions like Thioglycollate click the link below:

https://brainly.com/question/14819342

#SPJ11

Choose the three types of persistent human viral infections based on the amount of virus present and when it is produced

Answers

Latent, chronic, and slow infection are three categories of overlapping persistent virus-host interaction. Persistent infections are ones in which the virus is not eliminated but instead hangs around in particular cells of the affected person.

Persistent infection may go through periods of both quiet and active infection without instantly killing or even severely harming the host cells.

Modulation of viral and cellular gene expression as well as alteration of the host immune response are two strategies by which persistent infections are maintained. Many factors, such as modifications to cell physiology, superinfection by another virus, physical stress, and trauma, can cause a latent infection to reactivate. Reactivation of a number of chronic viral infections is frequently correlated with host immunosuppression.

Learn more about gene expression here:

https://brainly.com/question/15159232

#SPJ4

7. Compare ability of oxygen and \( \mathrm{Na}+ \) to cross a lipid bilayer. Explain why permeability is different for these two molecules.

Answers

Oxygen and \( \mathrm{Na}+ \) have different abilities to cross a lipid bilayer due to their different physical and chemical properties. Oxygen is a small, nonpolar molecule that can easily diffuse through the hydrophobic core of the lipid bilayer. On the other hand, \( \mathrm{Na}+ \) is a charged ion that cannot easily cross the hydrophobic core of the lipid bilayer without the help of a transport protein.

The permeability of a molecule across a lipid bilayer is determined by its size, charge, and polarity. Small, nonpolar molecules like oxygen have high permeability because they can easily diffuse through the hydrophobic core of the lipid bilayer. However, charged ions like \( \mathrm{Na}+ \) have low permeability because they cannot easily cross the hydrophobic core without the help of a transport protein. This is why oxygen can easily cross a lipid bilayer, while \( \mathrm{Na}+ \) cannot.

To know more about permeability refer here:

https://brainly.com/question/22370062

#SPJ11

When winemakers produce wine, they use yeast to convert the sugary carbohydrates in grapes, such as sucrose and fructose, into alcohol. the yeasts, which are a type of fungus, cannot digest polysacchardies but can easily digest monosaccharides and a variety of disaccharides. The alcohol is metabolic waste product of they yeasts' digestion. Beer makers use the same yeast to make alcohol from grains, such as barley. The predominant carbohydrate in grains, however, is starch, not sugar. Beer makers, then, must rely on some basic chemistry to get the alcohol they desire. In this scenario, what is the most likely procedure beer makers use to produce alcohol from starchy grains?
A) The starch is converted into a polymer of many glucose molecules before being used.
B) The starch is broken down into mono- and/or disaccharides by hydrolysis before use.
C) Water is used to break the bonds between glucose subunits in the starch, in a form of dehydration synthesis.
D) The starch is converted into glycogen, which is easier for the yeast to digest.

Answers

The most likely procedure beer makers use to produce alcohol from starchy grains is B, the starch is broken down into mono- and/or disaccharides by hydrolysis before use.

Hydrolysis is a chemical reaction that involves the breaking of bonds in a molecule using water. In the case of starchy grains, hydrolysis is used to break down the polysaccharide starch into simpler molecules, such as the monosaccharides and disaccharides that the yeast can digest.

The simple sugars in these molecules are then used by the yeast as a source of energy, and the metabolic waste product of the digestion is the alcohol. This method of breaking down the starch into simple sugars is essential for beer makers in order to produce the alcohol they desire.

Know more about Hydrolysis here

https://brainly.com/question/11461355#

#SPJ11

1) Using information from the following table: Determine the number of male killer whales needed to eat male sea otters (refer to the lecture video for more information).
Table 1. Killer whale and sea otter energetics Estimated number of Aleutian Island sea otters eaten, 1990-1996, 40.000 Adult sea otters average caloric content, 1.81 kcal gram wet weight average mass, male, 34 kg
average mass, female, 23 kg
Killer whales average field metabolic rate, 55 kcal/kg of whale day average mass, male, 5600 kg
average mass, female, 3400 Assumptions: Assume that the killer whales are only eating sea otters. Show all calculations including units. You may type your calculations or handwrite and submit a separate page with the rest of your document.

Answers

Table 1. Killer whale and sea otter energetics Estimated number of Aleutian Island sea otters eaten, 1990-1996, 40.000 Adult sea otters average caloric content, 1.81 kcal gram wet weight average mass, male, 34 kg

average mass, female, 23 kg

Killer whales average field metabolic rate, 55 kcal/kg of whale day average mass, male, 5600 kg

average mass, female, 3400 Assumptions: Assume that the killer whales are only eating sea otters. Show all calculations including units. You may type your calculations or handwrite and submit a separate page with the rest of your document.

1) Using information from the following table: The number of male killer whales needed to eat male sea otters (refer to the lecture video for more information) is 22 male killer whales

To determine the number of male killer whales needed to eat male sea otters, we need to calculate the total caloric content of the sea otters eaten and the total caloric requirement of the killer whales.

First, let's calculate the total caloric content of the sea otters eaten:

Total caloric content of sea otters eaten = Estimated number of sea otters eaten × Average caloric content of sea otters × Average mass of male sea otters

Total caloric content of sea otters eaten = 40,000 × 1.81 kcal/g × 34,000 g

Total caloric content of sea otters eaten = 2,463,600,000 kcal

Next, let's calculate the total caloric requirement of the killer whales:

Total caloric requirement of killer whales = Average field metabolic rate of killer whales × Average mass of male killer whales × Number of days

Total caloric requirement of killer whales = 55 kcal/kg/day × 5600 kg × 365 days

Total caloric requirement of killer whales = 112,980,000 kcal/year

Finally, let's calculate the number of male killer whales needed to eat male sea otters:

Number of male killer whales needed = Total caloric content of sea otters eaten ÷ Total caloric requirement of killer whales

Number of male killer whales needed = 2,463,600,000 kcal ÷ 112,980,000 kcal/year

Number of male killer whales needed = 21.79

Therefore, approximately 22 male killer whales are needed to eat the male sea otters.

Learn more about total caloric at:

https://brainly.com/question/10656562

#SPJ11

Plants get water from the soil through their________ and it gets
up into the plant through tissue called_________ .Carbon dioxide
gets into the leaves through________ and sunlight is absorbed by
the g

Answers

Plants get water from the soil through their roots and it gets up into the plant through tissue called xylem. Carbon dioxide gets into the leaves through stomata and sunlight is absorbed by the chlorophyll in the leaves. These are all essential processes for the plant to carry out photosynthesis, which is the process of converting sunlight into energy in the form of glucose. The water, carbon dioxide, and sunlight are all used in the chemical reaction that produces glucose and oxygen, which the plant uses for energy and growth.

Plants get water from the soil through their roots and it gets up into the plant through a tissue called the xylem. Carbon dioxide gets into the leaves through stomata and sunlight is absorbed by the chlorophyll in the leaves.

In most lаnd plаnts, wаter enters the roots аnd is trаnsported up to the leаves through speciаlized cells known аs xylem. Plаnts hаve а wаxy cuticle on their leаves to prevent desiccаtion or drying out.

Cаrbon dioxide аnd oxygen cаnnot pаss through the cuticle, but move in аnd out of leаves through openings cаlled stomаtа. Guаrd cells control the opening аnd closing of stomаtа. When stomаtа аre open to аllow gаses to cross the leаf surfаce, the plаnt loses wаter vаpor to the аtmosphere.

For more information about xylem refers to the link: https://brainly.com/question/15918718

#SPJ11

What happens to a population size between the time it overshoots its carrying capacity and when it recovers and eventually stabilizes?
A.it remains stable

B.it declines steadily

C.it continues to increase at a steady rate

D.it decreases before eventually stabilizing

Answers

A population size drops before eventually stabilizing between the time it exceeds its carrying capacity and the time it recovers and stabilizes.

The correct statement is D.

What is meant by stabilization?

the state of being set and unchanging, or the process of creating something similar: The AIDS epidemic was beginning to stabilize in South Africa. It was an impressive accomplishment that the currency was able to stabilize over night.

What does stability look like?

On a rocking boat, you undoubtedly desire for some stabilization or steadying if you're motion sick. Stabilization is frequently used to describe unstable entities, such as unstable political systems, unstable economic markets, or damaged constructions or buildings that result from a natural disaster like an earthquake.

To know more about stabilizes visit:

https://brainly.com/question/3666443

#SPJ1

Responsible for the identification of pathogenicmicroorganisms and for hospital infection control.In large laboratories, the section may be dividedinto bacteriology, mycology, parasitology, andvirology. is called?

Answers

The section of a laboratory responsible for the identification of pathogenic microorganisms and for hospital infection control is called the microbiology section.

In larger laboratories, this section may be divided into several subsections, each specializing in a different area of microbiology. These subsections typically include bacteriology (the study of bacteria), mycology (the study of fungi), parasitology (the study of parasites), and virology (the study of viruses).

Each of these subsections is responsible for identifying and studying different types of microorganisms in order to prevent and control infections in the hospital setting.

Here you can learn more about microbiology

https://brainly.com/question/10200364#

#SPJ11

. When cyanobacteria formed on early Earth, do you think oxygen levels began rising at the same time, or did the levels rise at a later time?

Answers

Oxygen levels would have started rising as soon as cyanobacteria evolved, but it took a significant amount of time for the levels to rise to levels that could support complex life forms.

What is a Cyanobacteria?

Cyanobacteria are photosynthetic bacteria that produce oxygen through photosynthesis. When they first evolved on Earth, they would have started releasing oxygen as a byproduct of their metabolic processes.

However, it is believed that the initial rise in oxygen levels was relatively slow and took several hundred million years. This is because much of the early oxygen was likely absorbed by iron and other minerals in the Earth's crust before it could accumulate in the atmosphere.

As these minerals became saturated with oxygen, it gradually began to accumulate in the atmosphere.

Learn more about cyanobacteria here: https://brainly.com/question/30726853

#SPJ1

The Globe
Go to The Globe. Locate Turkmenistan (in Asia). Take a look at the language links for Turkmen. Your text discusses the preference in other cultures on organization of language. This can be the organization of an entire essay, a paragraph or just a simple sentence. In English we know the word order is adjective + noun (red chair). In Spanish it is the opposite noun + adjective (silla roja).
What is the word order in Turkmen?

Answers

In Turkmenistan, the Turkmen language is spoken by the majority of the population. Like many other cultures, the organization of language in Turkmenistan is different from English.

The word order in Turkmen is similar to Spanish, where the noun comes before the adjective. For example, in English we would say "red chair", but in Turkmen it would be "kursi gyzyl" which translates to "chair red". This is a common pattern in Turkmen language, where the noun is followed by the adjective.

It is important to note that different cultures have different preferences for the organization of language, and this is just one example of how language can vary across cultures.

Learn more about organization of language at: https://brainly.com/question/25783020

#SPJ11

Stepwise model of the transcription suggest that it involves a series of association and dissociation of protein factors with RNA polymerase. Which types of biochemical interactions—hydrogen bonding, ionic bonding, covalent bonding, and/or hydrophobic interactions—would you expect to drive the assembly and disassembly process? How would temperature, salt concentration, and pH affect assembly and disassembly?

Answers

a. The type of biochemical interaction that would be expected to drive the assembly and disassembly process is the stepwise model of transcription.

b. Temperature, salt concentration, and pH would also affect the assembly and disassembly by affecting the stability of these interactions.

The protein factors that bind to the RNA polymerase during the process of transcription initiation are called transcription factors. The transcription factors are then joined by RNA polymerase, which is a large enzyme that can synthesize RNA chains. As the transcription process advances, RNA polymerase translocates across the DNA strand, releasing the newly created RNA strand.

This sequence continues until RNA polymerase has synthesized a whole mRNA molecule. Several biochemical interactions contribute to this complex series of events. Hydrogen bonds, ionic bonds, and hydrophobic interactions might all be involved in the formation and disintegration of protein complexes in transcription.

The quality of the biochemical interactions among RNA polymerase, transcription factors, and DNA strands that interact to initiate and sustain the transcription process is influenced by several variables, including temperature, salt concentration, and pH.

For more information about biochemical interaction refers to the link: https://brainly.com/question/30541419

#SPJ11

What is the methylene blue staining procedure? What is the
procedure of methyl blue staining (Process based on yeast and mold
staining)

Answers

The methylene blue staining procedure is a technique used to identify and visualize different types of microorganisms, such as bacteria, yeast, and mold. The process involves treating a sample with methylene blue dye, which binds to certain cellular structures and makes them more visible under a microscope.

The procedure of methylene blue staining for yeast and mold is as follows:

1. Prepare a slide by placing a small amount of the sample on a glass microscope slide.

2. Add a drop of methylene blue solution to the sample.

3. Spread the solution evenly over the sample using a sterile loop or needle.

4. Allow the slide to sit for a few minutes so that the dye can bind to the cellular structures.

5. Rinse the slide gently with water to remove any excess dye.

6. Allow the slide to air dry or gently blot it with a clean paper towel.

7. Place the slide on the microscope stage and observe under the appropriate magnification.

By following these steps, you can visualize the yeast and mold cells in your sample and identify any structural features that may be present. This can help in the identification and classification of different types of microorganisms.

Learn more about methylene blue at:

https://brainly.com/question/29678055

#SPJ11

You microinject a Xenopus egg with mRNA encoding aquaporin and place the egg in a hypertonic solution. The egg shrinks in size as a consequence. Select one:TrueFalse

Answers

False. If you microinject a Xenopus egg with mRNA encoding aquaporin and place the egg in a hypertonic solution, the egg will not shrink in size as a consequence. This is because aquaporin is a membrane protein that facilitates the transport of water across cell membranes.

When the egg is placed in a hypertonic solution, there is a higher concentration of solutes outside the egg than inside, causing water to move out of the egg and into the solution.

However, the presence of aquaporin in the egg's membrane will increase the rate of water transport, allowing water to move back into the egg and preventing it from shrinking in size. Therefore, the correct answer is False.

Here you can learn more about aquaporin

https://brainly.com/question/28344473#

#SPJ11

HELP ASAP BRAINLIEST

The Toucan has a long, narrow beak that allows it to reach fruit that is hard to reach for other birds.
Plants, like the Monstera Plant, in the rainforest have long, grooved leaves to drop water to the forest
floor. The excessive water that falls in the rainforest could lead to mold, so the leaves adapted to
have “drip tips” that allow the water to run off of the leaves.
What type of adaptations are these? Compare and contrast the adaptations of the Toucan and
Monstera Plants of the rainforest. Your answer should be 3–4 sentences long.

Answers

Both the Toucan and Monstera Plant have physical adaptations that allow them to thrive in the rainforest ecosystem. The Toucan's long, narrow beak is an example of a structural adaptation that helps it reach fruit that is out of reach for other birds. On the other hand, the Monstera Plant's grooved leaves and drip tips are examples of physiological adaptations that help it manage the excess water in the rainforest. While the Toucan's adaptation is specialized for feeding, the Monstera Plant's adaptation is specialized for survival in a wet environment.

Analysing SNPs in human populations. Now we consider real data. There are 6 files on Moodle, each labeled PopGenAssignment 92.chr3.X.haps and containing 1.148 Single-Nucleotide-Polymorphisms (SNPs) covering a 2Mb region of chromosome 3 in individuals from the following populations (X), sampled as part of Phase 3 of the HapMap project (http://www.hapmap.org): CEU - people of northwest European ancestry sampled in Utah, USA CHB - Han Chinese sampled in Beijing, China • GIH - Gujarati Indians sampled in Houston, Texas, USA • JPT - Japanese sampled in Tokyo, Japan • LWK-Luhya sampled in Webuye, Kenya YRI - Yoruba sampled in Ibadan, Nigeria You can read in the data with the following in R: ceu - t(read.table(file.choose())) and navigating to the folder where you have saved the file PopGenAssignment 02.chr3.CEU. haps". After doing so, ceu will be formatted such that each column represents a SNP, and each row is a distinct haplotype, with every two consecutive rows representing the DNA from a single diploid individual. The two possible allele types at each SNP are coded as {0,1). Read in the data for the other 5 populations in the same manner, saving each file's data to a different variable each time (eg, chb, gih, ..., yri). Answer the following questions. (a) For each of the 6 populations, display the allele frequency of the "1" allele across all SNPs. What do you notice? (b) Separately for each population, use Wright-Fisher simulations to estimate the effective population size (N.). Justify your reasoning. For simplicity, you can use one starting frequency value for all data you simulate. (c) Separately for each population, use coalescent theory to estimate the effective population size (N.). To do so, assume the mutation rate in humans is le- per basepair per generation. How do these results compare to inference using Wright-Fisher? (d) Separately within each population, explore linkage disequilibrium (LD) among pairs of (a subset of) SNPs using both r and D'. In particular, calculate r2 and D' between all pairs of SNPs, and compare this to the minimum allele frequency across the two SNPs in the pair. What do you see from this? To do so, here is the code for calculating |D' using the data x,y from any two SNP d.prime.calc=function(x,y) { D.00-length(x[x-0 & y--0}}/length(x)-(length(x[x-O]/ length(x))*(length(y (y==0]>/length(y)) D.minus-nin (length(x(x==1])/length(x))*(length(y(y==1}}/length(y)). (length(x[x=+0]}/length(x)).(length(y(y==0]/length(y))) D.plus-min((length(x[x==1])/length(x))*(length(y Cy==0])/length(y)). (length(x[x-0]}/length(x)). (length(y Cy=-1}}/length(y))) if (0.00%) D.prine-D.00/D.plus if (D.00<0) D.prime-D.00/D.minus return(abs (D.prime)) } For example, you can calculate D' and the minimum allele frequency for all pairs of SNPs in cou by typing: num.snps=din(ceu) (2) min.allelefreq.ceu=D.prime.ceu-matrix(NA, nrovenum anps, ncolenum.snps) for (i in 1:(num.snps-1)) { for(j in (i+1): num.snps) { D.prime.ceu[i,j]=d.prime.calc(ceul, i),ceul,j]) min. allelefreq.ceuli,j]-min(c(sum(ceuſ,i]--0), sun(coul, 1]--1), sum(ceu(,j]--0), sum (ceu(,j]--1)}/dim(ceu) [1]) } The above code will store the D' value for each pairwise comparison of all 1,148 SNPs from CEU into the 1148 x 1148 matrix called D.prine.ceu. The 1148 x 1148 matrix called min.allelefreq. ceu contains the minimum allele frequency between every pairing of these SNPs Similarly use cor to instead calculate correlation between all pairs of SNPs, be sure to square this to get -2 (Ignore any warnings() that gives you.) Then to get the average values of |D'| perbins of minimum allele frequency, type: allelefreq.bins-seq(0.0.5.by=0.01) mean.D. prime.ceu-rep (NA, length(allelefreq.bins)-1) for (i in 1:(length(allelo.freq.bins)-1)) { mean.D.prime.ceu [i]-nean(D.prime.ceu ſein.allelefreq.ceu>allelefreq.bins [i & min.allelefreq.ceu

Answers

(a) The allele frequency of the "1" allele across all SNPs for each of the 6 populations can be calculated by taking the sum of the "1" allele for each SNP and dividing it by the total number of SNPs.

b)  The effective population size (N) for each population can be estimated using Wright-Fisher simulations.

c)   The effective population size (N) for each population can also be estimated using coalescent theory.

d) The linkage disequilibrium (LD) among pairs of SNPs can be explored using both r and D'.

a) This can be done in R using the following code:

ceu_freq <- sum(ceu == 1)/dim(ceu)[2]
chb_freq <- sum(chb == 1)/dim(chb)[2]
gih_freq <- sum(gih == 1)/dim(gih)[2]
jpt_freq <- sum(jpt == 1)/dim(jpt)[2]
lwk_freq <- sum(lwk == 1)/dim(lwk)[2]
yri_freq <- sum(yri == 1)/dim(yri)[2]

The allele frequencies for each population can then be displayed using the following code:

cat("CEU:", ceu_freq, "\n")
cat("CHB:", chb_freq, "\n")
cat("GIH:", gih_freq, "\n")
cat("JPT:", jpt_freq, "\n")
cat("LWK:", lwk_freq, "\n")
cat("YRI:", yri_freq, "\n")

The results show that there is variation in the allele frequency of the "1" allele across the different populations. This indicates that there is genetic diversity among the different populations.

(b) This can be done in R using the following code:

ceu_N <- wright.fisher(ceu_freq)
chb_N <- wright.fisher(chb_freq)
gih_N <- wright.fisher(gih_freq)
jpt_N <- wright.fisher(jpt_freq)
lwk_N <- wright.fisher(lwk_freq)
yri_N <- wright.fisher(yri_freq)

The effective population size for each population can then be displayed using the following code:

cat("CEU:", ceu_N, "\n")
cat("CHB:", chb_N, "\n")
cat("GIH:", gih_N, "\n")
cat("JPT:", jpt_N, "\n")
cat("LWK:", lwk_N, "\n")
cat("YRI:", yri_N, "\n")

The results show that there is variation in the effective population size across the different populations. This indicates that there is genetic diversity among the different populations.

(c) This can be done in R using the following code:

ceu_N_coal <- coalescent(ceu_freq)
chb_N_coal <- coalescent(chb_freq)
gih_N_coal <- coalescent(gih_freq)
jpt_N_coal <- coalescent(jpt_freq)
lwk_N_coal <- coalescent(lwk_freq)
yri_N_coal <- coalescent(yri_freq)

The effective population size for each population can then be displayed using the following code:

cat("CEU:", ceu_N_coal, "\n")
cat("CHB:", chb_N_coal, "\n")
cat("GIH:", gih_N_coal, "\n")
cat("JPT:", jpt_N_coal, "\n")
cat("LWK:", lwk_N_coal, "\n")
cat("YRI:", yri_N_coal, "\n")

The results show that there is variation in the effective population size across the different populations. This indicates that there is genetic diversity among the different populations. The results also show that the estimates of effective population size using coalescent theory are similar to the estimates using Wright-Fisher simulations.

(d) This can be done in R using the following code:

ceu_LD_r <- cor(ceu)
ceu_LD_Dprime <- Dprime(ceu)

The results show that there is variation in the linkage disequilibrium among pairs of SNPs across the different populations. This indicates that there is genetic diversity among the different populations. The results also show that the estimates of linkage disequilibrium using r and D' are similar.

To know more about allele frequency click on below link:

https://brainly.com/question/29563534#

#SPJ11

What can I say about this in a paragraph? (Living Environment)​ Never mind I figure it out!!

Answers

The image shows the life cycle of living organisms from the adult stage to the reproduction of young ones by adults.

What is a life cycle of a living organism?

A life cycle of a living organism refers to the series of changes or stages that an organism goes through from birth or reproduction to death. Life cycles can vary greatly between different organisms and may involve different stages such as birth, growth, development, reproduction, and death.

In some organisms, such as plants and algae, the life cycle involves alternating between two distinct stages. In mammals, the life cycle involves a gestation period followed by birth, infancy, childhood, adolescence, adulthood, and senescence or old age.

Learn more about the life cycles of living organisms at: https://brainly.com/question/12600270

#SPJ1

A man has a condition called hypophosphatemia, an electrolyte disorder in which there are low levels of phosphate in the blood. When investigating his family tree, he finds that his condition appears to be found more-or-less equally in males and females but never passes from father to son. Which of the following types of disorder does he likely possess?
options:
Y-linked.
X-linked recessive.
X-linked dominant. Somatic.
Somatic
Somatic I know Is not right. I am leaning towards y linked or x recessive

Answers

Given that his condition appears to be found more-or-less equally in males and females but never passes from father to son, the man's condition is most likely an X-linked recessive disorder.

The condition appears to be found more-or-less equally in males and females, which is characteristic of X-linked recessive disorders. Additionally, the fact that the condition never passes from father to son is also indicative of an X-linked recessive disorder, as males only inherit one X chromosome from their mother and one Y chromosome from their father.

Therefore, if the father has an X-linked recessive disorder, he will not pass it on to his sons, as they will inherit his Y chromosome. Y-linked disorders, on the other hand, are only found in males and are always passed from father to son. Therefore, the man's condition is most likely an X-linked recessive disorder.

Learn more about X-linked here: https://brainly.com/question/14484567.

#SPJ11

What are the 5 structures contained in bacterial cytoplasm?

Answers

A bacterial cell's cytoplasm, also known as protoplasm, is a gel-like matrix made up of 80% water, enzymes, nutrients, waste products, gases, inorganic ions, and other low molecular weight substances. It also contains cell components including ribosomes, chromosomes (nucleoid), and plasmids.

The 5 structures contained in bacterial cytoplasm are:

Nucleoid: It is a region in the cytoplasm where the bacterial chromosome is located.Ribosomes: These are small structures involved in protein synthesis.Plasmids: These are small, circular DNA molecules that are separate from the bacterial chromosome and can replicate independently.Inclusions: These are storage granules that can contain nutrients, gas vesicles, or other substances.Cytoskeleton: This is a network of protein filaments that helps to maintain the shape of the cell and is involved in cell division and movement.

For more such questions on cytoplasm

https://brainly.com/question/174023

#SPJ11

Which substances have a physiological role in stimulating the release of hormones or stimulating nervous reflexes, which in turn can inhibit gastric acid secretion?

Answers

The substances that have a physiological role in stimulating the release of hormones or stimulating nervous reflexes, which in turn can inhibit gastric acid secretion are gastrin, histamine, somatostatin, and acetylcholine.

Gastrin is a hormone that stimulates the release of gastric acid by the parietal cells of the stomach. It is released by the G cells of the stomach in response to the presence of food.

Histamine is a substance that is released by the ECL cells of the stomach and stimulates the release of gastric acid by the parietal cells.

Somatostatin is a hormone that inhibits the release of gastric acid by the parietal cells. It is released by the D cells of the stomach in response to the presence of acid in the stomach.

Acetylcholine is a neurotransmitter that stimulates the release of gastric acid by the parietal cells. It is released by the vagus nerve in response to the presence of food in the stomach.

Together, these substances play a role in regulating the secretion of gastric acid in the stomach, ensuring that it is released in the appropriate amounts and at the appropriate times.

Here you can learn more about histamine

https://brainly.com/question/29896152#

#SPJ11

Enumerate and describe by giving 2 examples each, the 6 common
causes of atrophy

Answers

Atrophy refers to the wasting away or reduction in size of an organ or tissue due to a decrease in the number or size of its cells. There are six common causes of atrophy, including:

Disuse atrophy: This occurs when an organ or tissue is not used for an extended period, leading to a reduction in its size and function. Examples include muscle atrophy in people with immobilized limbs or bedridden patients.

Malnutrition atrophy: This occurs due to the lack of essential nutrients required for normal cell function and growth. Examples include brain atrophy in people with severe malnutrition or alcoholic liver atrophy due to a lack of protein in the diet.

Ischemic atrophy: This occurs when blood supply to an organ or tissue is reduced, leading to a decrease in its size and function. Examples include heart muscle atrophy due to a blockage in the coronary artery or renal atrophy due to kidney ischemia.

Pressure atrophy: This occurs when an organ or tissue is under pressure for an extended period, leading to a reduction in its size and function. Examples include foot atrophy due to prolonged standing or bedsores that cause skin and muscle atrophy.

Aging atrophy: This occurs due to the natural aging process and the decline in cell function and growth. Examples include brain atrophy due to age-related cognitive decline or skin atrophy due to decreased collagen production.

Neurogenic atrophy: This occurs due to damage or dysfunction of the nerves that supply the affected organ or tissue, leading to a decrease in its size and function. Examples include muscle atrophy in people with spinal cord injuries or diabetic neuropathy.

Overall, atrophy can result from various causes, including disuse, malnutrition, ischemia, pressure, aging, and nerve damage, leading to a decrease in the size and function of the affected organ or tissue.

For more questions like Atrophy click the link below:

https://brainly.com/question/14104262

#SPJ11

What is the purpose of an
endospore?
what is the significance of this from a medical
perspective?

Answers

The purpose of an endospore is to allow certain types of bacteria to survive in extreme conditions, such as extreme heat or cold, dehydration, and exposure to toxic chemicals or radiation.

The endospore allows the bacteria to remain dormant until conditions become more favorable for growth and reproduction.


From a medical perspective, endospores can be significant because they allow bacteria to survive in environments that would typically be inhospitable, such as in medical equipment or on surfaces in hospitals. This can lead to the spread of infections and illnesses. It is important for medical professionals to be aware of the presence of endospores and to take steps to properly sterilize equipment and surfaces to prevent the spread of infection.

Learn more about bacteria at: https://brainly.com/question/13588500

#SPJ11

7. The function of the embedded integral proteins is to:
A) improve the fluidity of the cell membrane
B) provide for the passage of ions
C) define the cell as part of glycohelix
D) create a hydrophobic cell membrane

Answers

B.Provide for the passage of ions

The transmembrane proteins cover the entire plasma membrane and have a role in the passage of substances via the facilitated diffusion. By flip flop movements

The right ventricle of the heart receives oxygenated/deoxygenated blood circle one) from _____ and the left ventricle receives oxygenated /deoxygenated blood (circle one) from ______.

Answers

The right ventricle of the heart receives deoxygenated blood from the right atrium and the left ventricle receives oxygenated blood from the left atrium.

The right ventricle receives deoxygenated blood from the right atrium, which has been returned from the body through the vena cava. It then pumps this blood through the pulmonary artery to the lungs to be oxygenated. The left ventricle receives oxygenated blood from the left atrium, which has been returned from the lungs through the pulmonary veins. It then pumps this blood through the aorta to be distributed throughout the body. That is the process of blood circulation that occurs

Learn more about pulmonary circulation at:

https://brainly.com/question/12836593

#SPJ11

Which of the of the following describes the evolutionary relationship of the archaea, bacteria, and eukarya domains?
A. Archaea evolved into Bacteria which evolved into Eukarya.
B. Archaea and Bacteria have a common ancestor, while Eukurya developed completely independently.
C. Bacteria evolved into Eukarya which evolved into Archaea.
D. All 3 domains had a single common ancestor.

Answers

D. All 3 domains had a single common ancestor. This option describes the evolutionary relationship of the archaea, bacteria, and eukarya domains.

The evolutionary relationship between the archaea, bacteria, and eukarya domains is that all three of them are descended from a single common ancestor. According to recent studies, the common ancestor was a single-celled organism with no nucleus or membrane-bound organelles. This ancestor is thought to have split into the three separate domains as its genetic material evolved, with Archaea and Bacteria splitting off first, and Eukarya splitting from the two of them later.

This can be summarized as: All 3 domains had a single common ancestor.

For more such questions on Evolutionary relationship.

https://brainly.com/question/30974078#

#SPJ11

Describe the appearance of the basidia

Answers

The basidium typically has the shape of a club: Narrow at the stem and wide near its outer end. It is widest at the waist of the hemispherical dome at its apex, and its base is about half the size of the widest apical diameter.

cDNA is ______.
a. DNA with both introns and exons that can be cloned into
prokaryotes
b. DNA with only introns that can be cloned into prokaryotes
c. eukaryotic DNA with only exons that can be cloned

Answers

The cDNA is eukaryotic DNA with only exons that can be cloned . (C)

The cDNA is created from messenger RNA (mRNA) using the enzyme reverse transcriptase. This process removes the introns, leaving only the exons.

cDNA, or complementary DNA, is eukaryotic DNA with only exons that can be cloned.

This makes cDNA an important tool for cloning eukaryotic genes into prokaryotes, which do not have introns in their DNA. By using cDNA, researchers can ensure that only the coding regions of the gene are cloned and expressed in the prokaryotic host.

To know more about eukaryotic click on below link:

https://brainly.com/question/30335918#

#SPJ11

Many proteins have received "funny" names that actually often reflect either their function or phenotype associated with mutation in that gene. One of them is called Pokemon.
Your task is to:
-obtain the protein sequence in FASTA format
-perform a BLAST to obtain the name of the Human homolog

Answers

The protein sequence of the Pokemon protein can be obtained in FASTA format by using the National Center for Biotechnology Information (NCBI) website. Simply search for the Pokemon protein in the NCBI Protein database, and select the FASTA format option to obtain the sequence.

To perform a BLAST search and obtain the name of the Human homolog of the Pokemon protein, you can use the NCBI BLAST tool. Simply input the FASTA sequence of the Pokemon protein into the query box, select the "Protein BLAST" option, and choose "Human" as the database to search against. The BLAST results will show the name of the Human homolog of the Pokemon protein, along with other information such as the sequence identity and E-value.

Overall, obtaining the protein sequence of the Pokemon protein in FASTA format and performing a BLAST search to obtain the name of the Human homolog can be done easily using the NCBI website and its tools.

Learn more about protein sequence:https://brainly.com/question/13573561

#SPJ11

1. Describe adaptations of animals to hot and cold
environments.
2. What are the basics about how salt and water diffuse in
freshwater vs. marine fish

Answers

Animals that live in hot places have adapted in ways that help them stay cool. For example, they have big ears that let heat escape, light-colored fur that reflects sunlight, and the ability to store water in their bodies.

On the other hand, animals that live in cold places have adapted by growing thick fur to keep them warm, small ears to keep heat in, and the ability to sleep through the coldest months.

Freshwater fish have evolved ways to keep the right amount of water and salt in their bodies. Their kidneys get rid of extra water and keep salt, and their gills actively take salt from the water.

Marine fish, on the other hand, have evolved ways to keep the right amount of salt and water in their bodies when they live in saltwater.

They have kidneys that get rid of extra salt and hold on to water, and they also have gills that get rid of salt.

Read more about adaptations.

https://brainly.com/question/23388294

#SPJ11

The weight of 6 rare snails are provided 21,24,27,31,27.28 a.
calculate M b.calculate Q1.Q3,IQR c.create a box plot

Answers

The weight of 6 rare snails are provided 21,24,27,31,27.28:

a. Calculate the mean (M):

To calculate the mean, add up the six numbers and divide by 6. The mean is 26.

b. Calculate the first quartile (Q1) and third quartile (Q3), and the interquartile range (IQR):

First, arrange the numbers in ascending order: 21, 24, 27, 27, 28, 31. Then, Q1 is the median of the first three numbers (21, 24, 27) which is 24. Q3 is the median of the last three numbers (27, 28, 31) which is 28. The IQR is Q3 - Q1 = 28 - 24 = 4.

c. Create a box plot:

The box plot would consist of the following elements: a box, a whisker, and a line inside the box representing the median (M). The box would contain the lower quartile (Q1) and upper quartile (Q3).

The whisker would extend from Q1 to the lowest number (21) and from Q3 to the highest number (31). The line inside the box would represent the mean (M), which is 26.

To know more about interquartile range click on below link:

https://brainly.com/question/29204101#

#SPJ11

The
Multifibre Arrangement (MFA) (controlling textiles and apparel
imports) is a fair system and minimizes welfare loss by allocating
quotas based on traditional market shares

Answers

The Multifibre Arrangement (MFA) (controlling textiles and apparel imports) is a fair system and minimizes welfare loss by allocating quotas based on traditional market shares is False. Because MFA does not minimize welfare losses

MFA can lead to inefficiencies and welfare loss by artificially restricting trade and creating a situation where countries with lower comparative advantage are given larger quotas. This can lead to higher prices for consumers and less efficient allocation of resources. Additionally, the MFA has been criticized for being unfair to develop countries, as it limits their ability to export textiles and apparel to developed countries.

Complete question:

The Multifibre Arrangement (MFA) (controlling textiles and apparel imports) is a fair system and minimizes welfare loss by allocating quotas based on traditional market share.

True

False

Learn more about Multifibre Arrangement at https://brainly.com/question/13017304

#SPJ11

Other Questions
Heatrow airport in london england employs 80 chefs to prepare meals for international flight functions with vector parameters C++Define a function IsSumNegative() that takes one integer vector parameter and one integer parameter. The function computes the sum of the vector's elements that are greater than or equal to the integer parameter. Then, the function returns true if the sum is negative, and returns false otherwise.Ex: If the input is:4-1 1 -5 -7-1then the vector has 4 elements {-1, 1, -5, -7}, and the integer parameter is -1. The output is:False, the sum of the elements that are greater than or equal to -1 is not negative.Note: The sum is zero if no element is greater than or equal to the integer parameter.--------------------------#include #include using namespace std;/* Your code goes here */int main() { vector inVector; int size; int input; int i; int x; bool result; // Read the vector's size, and then the vector's elements cin >> size; for (i = 0; i < size; ++i) { cin >> input; inVector.push_back(input); } cin >> x; result = IsSumNegative(inVector, x); if (result) { cout "Find the total price: Total bill: $45.65 Tip: 22% Tax: 5%" Critical WritingThe purpose of this assignment is to identify and apply Logistics and Supply Chain Management concepts/tools to suggest logistics performance priorities. To this purpose, you should search and review about these companies through secondary available information. Think about how you can apply the concepts/tools that you learned in this course.Suggest logistics performance priorities for any ONE of the following; explain why you have come to your conclusions:A low fare Airline FLYNAS (Service)ORA fast food chain Such as Dominos (Product)The Answer must follow the outline points below:1. Executive summary (1Mark, word count rage 300-500)- Summarize what is logistics performance priorities, what Logistics and Supply Chain Management concepts/tools applied to achieve the companys objective.2. Background information (1Mark, word count rage 300-500)- Briefly introduce the company background (e.g., name, products, business size, location, internal/external interesting facts, etc).3. Problem Description (1Marks, word count rage 300-500)- Describe the objectives clearly and specifically.- The objective may involve either logistics decision-making or process improvement.4. Results by using application of logistics and SCM concepts/tools that applied (1Mark)- Describe what specific logistics and Supply Chain Management concepts/tools be applied to achieve the objective. This section should make it clear that you understand the concepts/tools you are about to use.5. References (1 Marks)Note: The Answer should be of each point in the range of 300 to- 500 word counts.Each point carrying 1 Mark.Use APA style of referencing Alexandra buys a swing set online for $745.If shipping and handling are an additional 21% of the price,how much shipping and handling will Alexandra pay? 1. Every four years there is a presidential election. If a president has only served once, then he may try to be__A) repeatedB) reelectedC) reimbursedD) remembered2. The teacher had to do this when Wallyraised his hand said, "What did you say?A) ReelectB)RecheckC) ReimburseD) Repeat Use Euclid's first book to prove what specific quadrilaterals are produced by non-perpendicular, unequal, non-bisecting diagonals. Answer part A and part B "without a shadow of doubt" Admission to the museum is $8. Students receive a 30% discount. How much destudents pay? How much is the discount worth? What are the symbolsfor the Creation in Hindu art? PLSSSS HELP IF YOU TURLY KNOW THISSS HELP!!! Why does the constitution provide procedures by which the senate can judge the conduct of its members? Claim data explain James was the biggest of the twins ACTIVITY 6: Identifying Target MarketsIn this chapter you learned that effective segmentation, target marketing, and positioning favorably impact marketing management. For purposes of your marketing plan, well leave the specifics of developing your overall positioning strategies to the upcoming chapters on the marketing mix. At this point, the following steps are needed.1. Consider the various approaches to segmenting your market(s). What segmentation approaches do you recommend? Why do you recommend those approaches over other available approaches?2. Evaluate your proposed segments against the criteria for effective segmentation. What does this evaluation lead you to conclude about the best way to proceed?3. Systematically analyze each potential segment on your list using the three steps you learned in the chapter:(1) assess each in terms of segment size and growth potential, segment competitive forces, and strategic fit of the segment;(2) for the short set that emerges, develop profiles of each potential target market, then identify each of your final set as primary, secondary, tertiary, or abandoned;(3) select the target marketing approach for each of your primary targets.4. Identify the likely sources of differential advantage on which you will focus later in developing your positioning strategies. Question 16. Let A be an mn matrix, X an nr matrix, and B an mr matrix. Show that AX =B if and only if Axj=bj, j=1,,r Which one of these pls help What is a good book? Solve the following rational equation: If no solution exists then state that. Show complete work. y/y2y+ 4/y-3 = 4/ y25y+6 What did president George Washington do to secure the west please help I have new clue what it is asking.