Ricardo came up with three different designs for paper airplanes. He would like to find out which design flies the farthest. Ricardo plans to fly each paper airplane five times. What step should ricardo take after he flies each plane?.

Answer: c

Explanation:

Current is the flowing charges that goes around p.d increases it.

Answer:

A horse pulls a cart, a person walks on the ground

Explanation:

Answer:

Know it's late but I couldn't find a good answer when I looked for it so i did it myself.

My answer:

One of the real world examples mentioned in the article was that of a rocket blasting off into space. It was explained that it's an example of Newton's third law because the rocket’s engines push on those gases (action force), and the gases push back (reaction force). This reaction shows an excellent example of Newton's third law.

Sample Response:

When gases escape downward out the tail of a rocket, they push upward on the rocket. When layers of the Earth collide, they force the Earth upward, forming mountains.

Explanation:

hope this helps <3

The density in g/cm³ of the cube is 2.70 g/cm³.

We need to know about density to solve this problem. Density is a unit that measures how dense the object is. It can be determined as mass divided by volume

ρ = m / V

where ρ is density, m is mass and V is volume.

From the question above, we know the cube have:

l = 2.65 cm

m = 50.3 gram

Find the volume of cube

V = l³

V = 2.65³

V = 18.61 cm³

Determine the density

ρ = m / V

ρ = 50.3 / 18.61

ρ = 2.70 g/cm³

Find more on density at: https://brainly.com/question/6838128

#SPJ4

Answer:

1The force is with u. Lol no Idea if this is correct sry if u fail. I go must now

Newton's Second Law of Motion states "The rate of change of momentum of a body is directly proportional to the applied unbalanced force in the direction of force".

Hello!

a = 3 m/s²

Use the equation F = m · a (Newton's Second Law) to solve.

We are given the force and mass, so plug these values into the equation:

60 = 20 · a

60 = 20a

Divide both sides by 20:

60/20 = 20a/20

a = 3 m/s²

Answer: The Answer is 10 Ampere

Explanation:

The Formula

Resistance= Voltage ÷ current

Current= Resistance÷ current

Resistance= 12 ohms

Potential difference=120volts

hence Current= 10 Ampere

Hope it helps please leave a like if u are satisfied

bye

The question is confusing for the initial direction of the green ball. We assume to the left.

Answer:

The mass of the green ball is 360 Kg

Explanation:

Law Of Conservation Of Linear Momentum

The total momentum of a system of bodies is conserved unless an external force is applied to it. The formula for the momentum of a body with mass m and velocity v is

P=mv.

If we have a system of bodies, then the total momentum is the sum of the individual momentums

[tex]P=m_1v_1+m_2v_2+...+m_nv_n[/tex]

If some collision occurs, the velocities change to v' and the final momentum is:

[tex]P'=m_1v'_1+m_2v'_2+...+m_nv'_n[/tex]

In a system of two masses, the law of conservation of linear momentum

is written as:

[tex]m_1v_1+m_2v_2=m_1v'_1+m_2v'_2[/tex]

Let's call m1=30 Kg the mass of the red ball moving to the right at v1=4 m/s, m2 (unknown) the mass of the green ball moving at v2=-5 m/s to the left (assumed).

After the collision, the red ball rolls to the left at v1'=-2 m/s and the green ball is at v2'=-4.5 m/s. Thus:

[tex]30*4+m_2*(-5)=30*(-2)+m_2(-4.5)[/tex]

Operating:

[tex]120-5m_2=-60-4.5m_2[/tex]

[tex]120+60=5m_2-4.5m_2[/tex]

[tex]180=0.5m_2[/tex]

[tex]m_2=180/0.5=360[/tex]

The mass of the green ball is 360 Kg

Answer:

The difference is that water is an incompressible fluid — its density is almost constant as the pressure changes — while air is a compressible fluid — its density changes with pressure. Atmospheric pressure is the pressure exerted on a surface by the weight of the atmosphere (a compressible fluid) above it.

Explanation:

Answer:

Net force = 509.90 N

Explanation:

Given that,

Force exerted by wind is 500 N South on a sailboat.

The force exerted by water is 100 N on the sailboat.

Two forces are acting at an angle of 90 degrees. We can find the net force acting on the sailboat. Let it is F.

[tex]F=\sqrt{500^2+100^2} \\\\=509.90\ N[/tex]

So, the net force on the sailboat is 509.90 N.

Answer:

the car do different amount of work depending on how fast they finish is my answer

Explanation:

I hope so it is helpful for you

Answer: B. The car that finishes last has the lowest power.

Explanation:

Answer:

its b

Explanation:

Supplements labeled “natural” may interact negatively with medications. The correct option is B.

Dietary supplements are substances that you may use to supplement your diet with nutrients or to reduce your risk of health problems such as osteoporosis or arthritis.

Dietary supplements are available in pill, capsule, powder, gel capsules and tablets, extracts, or liquid form.

Dietary supplements are available in a variety of forms, including tablets, capsules, gummies, powders, drinks, and energy bars.

Vitamins D and B12 are popular supplements, as are minerals like calcium and iron, herbs like echinacea and garlic, and products like glucosamine, probiotics, and fish oils.

Because many supplements contain active ingredients that have strong effects in the body, herbal products can pose unexpected risks. Natural supplements may have negative interactions with medications.

Thus, the correct option is B.

For more details regarding nutritional dietary supplement, visit:

https://brainly.com/question/3653261

#SPJ2

Answer:ture

Explanation:

Answer:

item/object; more

Explanation:

A variable is defined as an object or item that can have more than one single value.

A variable is defined as a quantity that can have more than one single value.

In the context of mathematics and science, a variable is a symbol or quantity that can change or vary. It represents an unknown or changing value that can take on different values in different situations or scenarios. Variables are used to describe relationships, equations, and patterns in various fields such as mathematics, physics, economics, and more.

Variables are an essential concept in scientific research and experimentation. They allow scientists to investigate how changes in one factor can affect another factor. In an experiment, variables are typically categorized into two main types: independent variables and dependent variables. The independent variable is the one that the researcher manipulates or controls to observe its effect on the dependent variable, which is the outcome being measured.

For example, in a study investigating the effects of different amounts of fertilizer on plant growth, the amount of fertilizer would be the independent variable, as it is being controlled by the researcher. The plant growth would be the dependent variable, as it depends on the different amounts of fertilizer applied.

Overall, variables are fundamental components of scientific inquiry, data analysis, and problem-solving, enabling researchers and scientists to understand and describe the relationships and patterns within various phenomena.

To learn more about variable, here

https://brainly.com/question/15740935

#SPJ3

Answer:

Proxima Centauri is a small, low-mass star located 4.244 light-years (1.301 pc) away from the Sun in the southern constellation of Centaurus. Its Latin name means the "nearest [star] of Centaurus". This object was discovered in 1915 by Robert Innes and is the nearest-known star to the Sun.

Star system: Alpha Centauri

Category: Star, Flare star

Constellation: Centaurus

Discoverer: Robert T. A. Innes

Explanation:

u should make it into an essay

Answer:

-49.49

Explanation:

If there’s no air resistance then the only thing acting on the object is the force of gravity which is mass times gravity. And to get mass all we have to do is divide 50.5/10 then times that by -9.8 since that’s the force of gravity.

Answer: The answer would be 50.5 N.

Explanation: It’s because there’s no air resistance.

Answer:

it's a

Explanation:

Answer:

I believe its D!

Explanation:

Kenetic energy is motion

Answer:

I=V/R

Explanation:

Ohm's law gives the mathematical relationship between, current, voltage and the resistance of the circuit. Its mathematical form is given by :

V = IR ....(1)

V = voltage (in volts)

I = current (in Ampere)

R = resistance (in ohms)

Equation (1) can be rewritten as :

[tex]I=\dfrac{V}{R}[/tex]

Hence, the correct relation is I=V/R.

Answer:

trasvere wave

Explanation:

first one

Adding the rise time and fall time then the package to reach the ground in 3.647 second.

Time can be defined in the sence as,that it is a continued sequence of existence and events that occurs in an apparently irreversible succession from the past, through the present, into the future.

We are given that ,

The packege 's trajectory into a rise to maximum height and fall from there to the ground .Rise to maximum height begins at vertical position is  given as,

Vertical position of the helicopter = H₀ = 20 m,

Initial velocityof helicopter = u = 14 m/s upward

Covered time of the helicopter =t₁ = 0,

Acceleration under gravity of helicoper=(- a) = -9.81 m/s²

Rise ends when instantaneous velocity v = 0,

Therefore, from the equation of motion for velocity as a function of time is  written as ,

v = a + at

0 = 14 m/s - (9.81 )m/s² t₁

t₁ = 1.427sec

Thus , the velocity changes linearly over time t₁ sec from u = 0 m/s then the averaging velocity can be given by w i.e.

w = u /2 = (14m/s)/2

w = 7 m/s

Therefore, maximum height of packege is given as,

H₁ = H₀ + w × t₁

H₁ =20m + 9.81m/s (1.427)s

H₁ = 33. 998 m

Therefore, when the packege fall from maximum height begins at ,

Time= t₁ = 0,

Position= h = H₁

Velocity= u = 0, and

Acceleration due to gravity downward=(-a) = -9.81 m/s²

Thus the  equation of motion for position (s) as a function of initial position (h) is can be written as,

s = h + ut₁ + (1/2) at₂²

0 = H₁ + 0 + (1/2) (-9.81)t₂²

t₂² = 4. 890 s

t₂ = 2.21 s

Hence , on adding the rise time t₁ and fall time t₂

Total time T = t₁ + t₂

T = 1.427 s + 2.21s = 3.647 s

Thus, then the package to reach the ground in 3.647 second.

To know more about time

https://brainly.com/question/1581463

#SPJ1

Answer:

[tex]v_x=34 m/s[/tex]

[tex]v_y=53.9\ m/s[/tex]

Explanation:

Horizontal Launch

When an object is thrown horizontally with a speed v from a height h, it describes a curved path ruled by gravity until it eventually hits the ground.

The horizontal component of the velocity is always constant because no acceleration acts in that direction, thus:

vx=v

The vertical component of the velocity changes in time because gravity makes the object fall at increasing speed given by:

[tex]v_y=g.t[/tex]

The horizontal component of the velocity is always the same:

[tex]v_x=34 m/s[/tex]

The vertical component at t=5.5 s is:

[tex]v_y=9.8*5.5=53.9[/tex]

[tex]v_y=53.9\ m/s[/tex]

Answer:

False

Explanation:

Answer:

true

Explanation:

Inertia. Sometimes this first law of motion is referred to as the law of inertia. Inertia is the property of a body to remain at rest or to remain in motion with constant velocity.

hope you will like explanation and give me brainlist

Answer:

The atomic model, the structure of the solar system, and the theory of black holes are examples of models created using indirect evidence.

Explanation:

I have no explanation sorry.

Indirect evidence is based on inference. The atomic structure, the structure of the solar system, and the theory of black holes are all based on indirect evidence.

In studying the structure of the atom, we do not directly observe the sub-atomic particles rather we draw inferences from several experiments and make conclusions. This is indirect evidence.

The solar system can be studied using several astronomical instruments that aid us in making useful inferences regarding the solar system.

The weight of evidence that substantiate the existence of black holes have also been amassed through indirect evidence.

Learn more; https://brainly.com/question/13238701

Capillarity phenomenon is applied in the drawing of kerosene by the wicks of a kerosene stove.

A liquid's ability to flow through small openings without the aid of outside forces is known as capillarity. Cotton or cotton threads make up the majority of the wicks.

The process of a liquid flowing in a small space without the aid of, or even in opposition to, any outside forces like gravity is known as capillary action.

Surface tension causes a liquid in a capillary tube to have the inclination to rise or descend, which is known as capillarity. the uses of capillarity. 1. Even a tall tree uses the capillary rise to give water to the leaves at the top.

To learn more about capillarity please visit
https://brainly.com/question/1035152
#SPJ9

Answer:

aye man you alright? I’m here for you if u need anything. just keep ur head king and stay strong, I’m sorry for what happened. she probs left bc she wanted another guy, lost feelings, or family/personal issues etc.

The strain in the rod is [tex]2.37\times 10^{-3}[/tex]

Given:

Young's modulus, Y = [tex]20 \times 10^{10}\;N/m^{2}[/tex]

Steel density, [tex]\rho = 7.86 \times 10^{3}\;kg/m^{3}[/tex]

Length of the rod, L = 80 cm = 0.800m

The speed of the wave in the rod is,

[tex]$v = \sqrt{\frac{Y}{\rho}} = \sqrt{\frac{20\times 10^{10}\ \mathrm{N/m^2}}{7.86\times 10^3\ \mathrm{kg/m^3}}} = 5044\ \mathrm{m/s}$[/tex]

Hence the time taken by the wave to travel the end of the rod is,

[tex]$t=\frac{L}{v} = \frac{0.800\ \mathrm{m}}{5044\ \mathrm{m/s}} = 1.58\times 10^{-4}\ \mathrm{s}$[/tex]

The velocity of the rod is, [tex]$v_r = 12.0\ \mathrm{m/s}$[/tex]

The other end will keep moving after the front end hits the wall until the wave reaches the other end, given the period determined by the above problem.

As a result, before the wave reaches the end of the rod, it has traveled a distance of

[tex]$\Delta L = v_r t = (12.0\ \mathrm{m/s}) (1.58\times\ \mathrm{s}) = 1.90\times 10^{-3}\ \mathrm{m} = 1.90\ \mathrm{mm}$[/tex]

The strain in the rod is given by,

[tex]$\frac{\Delta L}{L} = \frac{1.90\times 10^{-3}\ \mathrm{m}}{0.800\ \mathrm{m}} = 2.37\times 10^{-3}[/tex]

Hence, the strain in the rod is [tex]2.37\times 10^{-3}[/tex].

In terms of physics, strain is defined as the fractional modification of configuration.

A system's reaction to an applied stress is called a strain, according to 2. A force that loads a material results in a stress that leads to deformation. Formula for a strain

Change in configuration equals strain first arrangement

It is a dimensionless quantity that lacks a unit.

Change in object size / original object size is known as strain.

It is a quantity without units or dimensions.

Strain kind.

Object length change divided by starting object length equals longitudinal strain.

L/L stands for longitudinal strain.

Change in object volume divided by starting object volume equals longitudinal strain

To know more about Strain visit:

https://brainly.com/question/19317733

#SPJ4

Answer:

C

Explanation:

Answer:

It would kill her

Explanation: