Here's the modified code that allows the user to enter the number of conversions and performs them using a loop:
import java.util.Scanner;
public class Main {
public static void main(String[] args) {
Scanner scanner = new Scanner(System.in);
System.out.print("Please enter the number of conversions: ");
int numConversions = scanner.nextInt();
if (numConversions <= 0) {
System.out.println("Invalid number of conversions");
System.exit(-1);
}
for (int i = 0; i < numConversions; i++) {
System.out.print("Please enter the temperature in Fahrenheit> ");
double fahrenheit = scanner.nextDouble();
double celsius = (fahrenheit - 32) * 5 / 9;
System.out.print("The corresponding temperature in Celsius is ");
System.out.printf("%.1f\n", celsius);
}
}
}
This code first prompts the user to enter the number of conversions, and then checks whether the input is a positive integer. If it's not, it displays an error message and terminates the program. Otherwise, it enters a for loop that will execute the specified number of times (i.e., the number of conversions).
Inside the loop, it prompts the user to enter the temperature in Fahrenheit, computes the corresponding temperature in Celsius, and displays the result. The printf() method is used to format the output to one decimal place.
After each conversion, the loop repeats until all the conversions have been performed.
Learn more about code here:
https://brainly.com/question/32727832
#SPJ11
What should be a Recursive Step in the below definition so that the elements of T belong to the set {2, 77, 222, 777777, 22222, 7777777777, ...} ? Basis: 2 ET,77 € T. Recursive Step: Closure: An element belongs to T only if it is 22 gr 77 or it can be obtained from 22 or 77 using finitely many operations of the Recursive Step.
a. If s2 ET, then s22 € T. If s7 ET, then s77777 € T.
b. If s2 ET, then s22 € T. If s7 ET, then $7777 € T. c.If s2 ET, then s222 € T. If s7 ET, then s77777 ET. d.If s ET, then s22 € T.
A Recursive Step in the given definition so that the elements of T belong to the set {2, 77, 222, 777777, 22222, 7777777777, ...} would be as follows:Option (c) is the correct choice of answer.
Given, Basis: 2 ET,77 € T. Recursive Step: Closure: An element belongs to T only if it is 22 gr 77 or it can be obtained from 22 or 77 using finitely many operations of the Recursive Step.So, the Recursive Step must be defined such that the elements 22 and 77 can be used to form any other element in the set T, by using finite operations. We can define the recursive step as follows:If s2 ET, then s222 € T. If s7 ET, then s77777 ET.By this definition of Recursive Step, we can show that all the given elements of T belong to the set {2, 77, 222, 777777, 22222, 7777777777, ...}.
To know more about Recursive visit:
brainly.com/question/32615501
#SPJ11
In a single command (without using the cd command), use cat to output what’s inside terminator.txt.
To accomplish this in one command, use the full path command. Refer to the file directory image! Check the hint if you need help writing out the full path.
The command for this question would be:cat/home/user/Documents/terminator.txt This command will display the contents of the "terminator.txt" file on the terminal.
In the command, cat is the command used to concatenate and display the contents of files. The full path to the file is specified as "/home/user/Documents/terminator.txt".
By providing the full path, you can directly access the file without changing the working directory using cd. The cat command then reads the file and outputs its contents to the terminal, allowing you to view the content of the "terminator.txt" file.
To learn more about concatenate click here, brainly.com/question/30389508
#SPJ11
The Fourier Transform (FT) of x(t) is represented by X(W). What is the FT of 3x(33+2) ? a. X(w)e^jw2
b. None of the options c. X(w)e^−jw2
d. X(w/3)e^−jw2
e. 3X(w/3)e^jw2
The Fourier Transform (FT) of a function x(t) is represented by X(ω), where ω is the frequency variable. The correct option is (e). 3X(ω/3)e^jω2
The Fourier Transform (FT) of a function x(t) is represented by X(ω), where ω is the frequency variable. To find the FT of 3x(33+2), we can apply the linearity property of the Fourier Transform, which states that scaling a function in the time domain corresponds to scaling its Fourier Transform in the frequency domain.
In this case, we have 3x(33+2), which can be rewritten as 3x(35). Applying the scaling property, the FT of 3x(35) would be 3 times the FT of x(35). Therefore, the correct option would be e. 3X(ω/3)e^jω2
This option states that the Fourier Transform of 3x(35) is equal to 3 times the Fourier Transform of x(35) scaled by a factor of 1/3 in the frequency domain and multiplied by the complex exponential term e^jω2.
Learn more about frequency link:
https://brainly.com/question/29739263
#SPJ11
Which of the following statements about greedy algorithms is true? A greedy algorithm always finds the optimal solution.
There is always only one greedy algorithm for a given problem.
A greedy algorithm repeatedly picks the best option
The statement "A greedy algorithm repeatedly picks the best option" is true.
Greedy algorithms follow a specific approach where they make locally optimal choices at each step, with the hope that these choices will lead to a globally optimal solution. However, it's important to note that this approach does not guarantee finding the absolute optimal solution in all cases.
Greedy algorithms work by making the best possible choice at each step based on the available options. The choice made is determined by a specific criterion, such as maximizing or minimizing a certain value. The algorithm continues to make these locally optimal choices until a solution is reached.
In the explanation of greedy algorithms, it's important to highlight the following points:
1. Greedy algorithms make decisions based on the current best option without considering future consequences. This myopic approach can be advantageous in some cases but may lead to suboptimal solutions in others.
2. While greedy algorithms are efficient and easy to implement, they do not always guarantee finding the optimal solution. There are cases where a greedy choice made at one step may lead to a non-optimal outcome in the long run.
3. The optimality of a greedy algorithm depends on the problem's characteristics and the specific criteria used to make choices. In some cases, a greedy algorithm can indeed find the optimal solution, but in other cases, it may fall short.
4. To determine the correctness and optimality of a greedy algorithm, it's essential to analyze the problem's properties and prove its correctness mathematically.
Overall, while greedy algorithms are useful and widely applied, it is crucial to carefully analyze the problem at hand to ensure that the chosen greedy approach will lead to the desired optimal solution.
To learn more about Greedy algorithms work click here: brainly.com/question/30582665
#SPJ11
The questions below are still based on the Technical Help Desk System case study in Question 2. Q.3.1 As stated in the case study, all the databases on Postgres including the back-ups should be encrypted. Discuss the importance of encryption, and distinguish between encryption and decryption in computer security. Q.3.2 The case study has numerous use cases and detailed information about use case is described with a use case description. List any four aspects of a use case covered in a use case description.
Q.3.3 In today's interconnected world, systems need reliable access control systems to keep the data secure. List and define the three elements that access control systems rely on. Q.3.4 Discuss two things you would take into consideration when designing the interface for both Web and Mobile.
Encryption is essential for securing databases, and it distinguishes between encryption and decryption in computer security.
Encryption plays a vital role in computer security, particularly when it comes to securing databases. It involves converting plain, readable data into an encoded format using cryptographic algorithms. The encrypted data is unreadable without the appropriate decryption key, adding an additional layer of protection against unauthorized access or data breaches.
The importance of encryption lies in its ability to safeguard sensitive information from being compromised. By encrypting databases, organizations can ensure that even if the data is accessed or stolen, it remains unreadable and unusable to unauthorized individuals. Encryption also helps meet regulatory compliance requirements and builds trust with customers by demonstrating a commitment to data security.
In computer security, encryption and decryption are two complementary processes. Encryption involves scrambling data to make it unreadable, while decryption is the process of reversing encryption to retrieve the original data. Encryption algorithms utilize encryption keys, which are unique codes that allow authorized individuals or systems to decrypt and access the encrypted data.
Learn more about databases
brainly.com/question/6447559
#SPJ11
why would you use Windows containers in a Infrastructure as code
environment ?
Windows containers can be used in an Infrastructure as Code (IaC) environment because they provide benefits such as consistency, Portability, Scalability and Resource Utilization and Infrastructure Flexibility.
Consistency:
Windows containers enable the creation of consistent environments by packaging applications and their dependencies together. By defining the container image in code, you can ensure that the same environment is reproducible across different stages of the software development lifecycle, from development to testing and production.Portability:
Containers provide portability across different infrastructure environments, allowing you to run the same containerized application on different hosts or cloud platforms. This portability is especially useful in an IaC environment where infrastructure is managed and provisioned programmatically. You can easily deploy and scale containerized applications across different environments without worrying about specific infrastructure dependencies.Scalability and Resource Utilization:
Windows containers offer lightweight and isolated execution environments, enabling efficient resource utilization and scalability. In an IaC environment, where infrastructure resources are provisioned dynamically, containers allow for agile scaling of applications based on demand. With containers, you can quickly spin up or down instances of your application, optimizing resource allocation and cost efficiency.Infrastructure Flexibility:
Windows containers provide flexibility in choosing the underlying infrastructure. They can be deployed on-premises or in the cloud, offering the freedom to use various infrastructure platforms, such as Kubernetes, Docker Swarm, or Azure Container Instances. This flexibility allows you to adopt a hybrid or multi-cloud strategy, leveraging the benefits of different infrastructure providers while maintaining a consistent deployment model through IaC.To learn more about windows: https://brainly.com/question/1594289
#SPJ11
Explain how the Bubble sort will sort the values in an array in an ascending order [10]. Hint - use an example to support your explanation.
Bubble sort is a simple sorting algorithm that repeatedly steps through the list, compares adjacent elements and swaps them if they are in the wrong order. It is called bubble sort because larger elements bubble to the top of the list while smaller elements sink to the bottom.
To illustrate how bubble sort works, let's consider an array of 10 numbers: [5, 2, 8, 3, 9, 1, 6, 4, 7, 0]. We want to sort these numbers in ascending order using bubble sort.
The first step is to compare the first two elements, 5 and 2. Since 5 is greater than 2, we swap them to get [2, 5, 8, 3, 9, 1, 6, 4, 7, 0].
Next, we compare 5 and 8. They are already in the correct order, so we leave them as they are.
We continue this process, comparing adjacent elements and swapping them if necessary, until we reach the end of the list. After the first pass, the largest element (9) will have "bubbled up" to the top of the list.
At this point, we start again at the beginning of the list and repeat the same process all over again until no more swaps are made. This ensures that every element has been compared with every other element in the list.
After several passes, the list will be sorted in ascending order. For our example, the sorted array would be [0, 1, 2, 3, 4, 5, 6, 7, 8, 9].
Overall, bubble sort is not the most efficient sorting algorithm for large data sets, but it can be useful for smaller lists or as a teaching tool to understand sorting algorithms.
Learn more about Bubble sort here:
https://brainly.com/question/30395481
#SPJ11
• Plot an undirected graph with 5 vertices using adjacency matrix. • Plot a directed graph with 6 vertices using adjacency matrix. • Plot an undirected graph with 7 vertices using edge list.
We need to know about Adjacency Matrix and Edge List. The adjacency matrix is used to represent a graph as a matrix. In the adjacency matrix, if a cell is represented as 1, it means there is an edge between the two vertices. Otherwise, it is 0.Edge List:
An edge list is a set of unordered pairs of vertices. Each element of an edge list is written as (u, v), which indicates that there is an edge between vertices u and v.Now, we will plot the undirected graph with 5 vertices using adjacency matrix. The adjacency matrix for the given graph is as follows. $$ \begin{matrix} 0 & 1 & 1 & 0 & 1\\ 1 & 0 & 0 & 1 & 1\\ 1 & 0 & 0 & 1 & 0\\ 0 & 1 & 1 & 0 & 1\\ 1 & 1 & 0 & 1 & 0\\ \end{matrix} $$Here is the graphical representation of the undirected graph with 5 vertices using adjacency matrix.
Next, we will plot a directed graph with 6 vertices using adjacency matrix. The adjacency matrix for the given directed graph is as follows. $$ \begin{matrix} 0 & 1 & 1 & 0 & 0 & 0\\ 1 & 0 & 0 & 0 & 0 & 0\\ 0 & 0 & 0 & 1 & 1 & 0\\ 0 & 0 & 0 & 0 & 0 & 1\\ 0 & 1 & 0 & 0 & 0 & 1\\ 0 & 0 & 1 & 0 & 1 & 0\\ \end{matrix} $$Here is the graphical representation of the directed graph with 6 vertices using adjacency matrix.Finally, we will plot an undirected graph with 7 vertices using edge list. The given edge list for the undirected graph with 7 vertices is as follows. {(1,2), (1,3), (1,4), (2,5), (3,5), (4,5), (4,6), (5,7)}Here is the graphical representation of the undirected graph with 7 vertices using the given edge list.
To know more about element visit:
https://brainly.com/question/12906315
#SPJ11
A set of class definitions and the console output is provided below. The main program is missing. A global function is also missing. Study the given code, console output and notes below. Then answer the question.
class battery {
public:
double resistance = 0.01; //internal resistance value
double voltage = 12.0; //internal ideal source voltage
double vbat = 0.0; //external battery terminal volatage initial value
double ibat = 0.0; //battery current initial value
//Calculate and save vbat, assuming ibat is already known
virtual void vbattery() = 0;
//Calculate and save ibat, assuming vbat is already known
virtual void ibattery() = 0;
};
class unloadedbattery : public battery {
public:
//Calculate and save vbat, assuming ibat is already known
virtual void vbattery() {
vbat = voltage - (ibat * resistance);
}
//Calculate and save ibat, assuming vbat is already known
virtual void ibattery() {
ibat = (voltage - vbat) / resistance;
}
};
class loadedbattery : public battery {
public:
double loadresistance;
//Calculate and save vbat, assuming ibat is already known
virtual void vbattery() {
vbat = voltage * (loadresistance / (loadresistance + resistance));
}
//Calculate and save ibat, given that load is already known
virtual void ibattery() {
ibat = voltage / (loadresistance + resistance);
}
};
Console output:
What is the current demand (in Amperes) for the unloadedbattery model? 1.5
Battery power output will be 17.9775 Watts
What is the load resistance (in Ohms) for the loadedbattery model? 5.0
Battery power output will be 28.6851 Watts
Notes:
a. Name the application QuestionTwo. The source file will be QuestionTwo.cpp.
b. The main program will create an "unloadedbattery" object, ask the user for current demand (ibat), and calculate vbat using the appropriate method.
c. It must then use a global function to calculate battery power output, which is vbat*ibat. However, main does not pass vbat and ibat to the function. Rather, main must only pass the unloadedbattery object to the function.
d. Then main will create a "loadedbattery" object and ask the user for the load resistance. Then the methods can be used to calculate vbat and ibat.
e. Once more, main must use the same global function to calculate battery power output and main must only pass the loadedbattery object to the function.
f. The global function takes a single argument (either loadedbattery or unloadedbattery object) and it returns the power as a double. It does not print to the console.
The given code provides class definitions for batteries, including unloaded and loaded battery models, and includes console output for specific calculations.
The main program, as well as a global function, are missing. The goal is to implement the missing code by creating objects of the unloadedbattery and loadedbattery classes, obtaining user input for specific values, calculating battery parameters using the appropriate methods, and using the global function to calculate battery power output based on the provided objects. The global function takes an object of either class as an argument and returns the power as a double.
The given code defines two classes, "unloadedbattery" and "loadedbattery," which inherit from the base class "battery." The unloadedbattery class implements the virtual functions "vbattery" and "ibattery" to calculate and save the battery voltage (vbat) and current (ibat) respectively. Similarly, the loadedbattery class overrides these functions to account for the load resistance.
To complete the code, the main program needs to be implemented. It should create an object of the unloadedbattery class, prompt the user for the current demand (ibat), calculate the battery voltage (vbat) using the appropriate method, and pass the unloadedbattery object to the global function along with the unloadedbattery class type. The global function will then calculate the battery power output, which is the product of vbat and ibat.
Next, the main program should create an object of the loadedbattery class, obtain user input for the load resistance, calculate vbat and ibat using the corresponding methods, and pass the loadedbattery object to the same global function. The global function will calculate the battery power output based on the loadedbattery object.
The global function is responsible for calculating the battery power output. It takes an object of either the loadedbattery or unloadedbattery class as an argument and returns the power as a double. The function does not print to the console; it solely performs the calculation and returns the result.
By following these steps, the main program can utilize the class objects and the global function to calculate and output the battery power output for both the unloadedbattery and loadedbattery models, based on user inputs and the implemented class methods.
To learn more about program click here:
brainly.com/question/30613605
#SPJ11
a a Problem 7 (10%). Let S be a set of n integers. Given a value q, a half-range query reports all the numbers in S that are at most q. Describe a data structure on S that can answer any half-range query in 0(1+k) time, where k is the number of integers reported. Your structure must consume O(n) space. For example, consider S = {20, 35, 10, 60, 75,5, 80,51}. A query with q = 15 reports 5, 10.
The data structure that can efficiently answer half-range queries on a set of n integers while consuming O(n) space is the **Counting Array**.
A Counting Array can be constructed by initializing an array of size n, with each element representing the count of integers in S that have a value equal to the index. To answer a half-range query with a given value q, we can simply return the sum of the counts in the Counting Array from index 0 to q.
The Counting Array can be built in O(n) time by iterating through each integer in S and incrementing the corresponding count in the array. To answer a query, we retrieve the counts in O(1) time by accessing the array elements directly. The number of integers reported, k, can be determined by subtracting the count at index (q+1) from the count at index 0. Therefore, the overall time complexity is O(1+k), meeting the required criteria.
To know more about data structure visit:
brainly.com/question/13147796
#SPJ11
Question 4 Which of the following item(s) is/are justifiable in the online environment? 1. Political activists wanting their voices heard in a country with brutal and authoritarian rulers 2. Online activities that can cause harm to others 3. Hacking online systems 4. Posting racist/misogynist/etc comments in public forums online 5. Attempting to go through Internet censorship 6. Options 1 and 2 above 7. Options 1 and 5 above 8. Options 2, 3 and 5
Among the given options, options 1 and 5 are justifiable. This includes political activists wanting their voices heard in oppressive regimes and individuals attempting to bypass internet censorship.
The remaining options, such as causing harm to others, hacking online systems, and posting offensive comments, are not justifiable in the online environment due to their negative consequences and violation of ethical principles.
Options 1 and 5 are justifiable in the online environment. Political activists living under brutal and authoritarian rulers often face limited opportunities to express their opinions openly. In such cases, the online platform provides a valuable space for them to voice their concerns, share information, and mobilize for change. Similarly, attempting to go through internet censorship can be justifiable as it enables individuals to access restricted information, promote freedom of speech, and challenge oppressive regimes.
On the other hand, options 2, 3, and 4 are not justifiable. Engaging in online activities that cause harm to others, such as cyberbullying, harassment, or spreading malicious content, goes against ethical principles and can have serious negative consequences for the targeted individuals. Hacking online systems is illegal and unethical, as it involves unauthorized access to personal or sensitive information, leading to privacy breaches and potential harm. Posting racist, misogynist, or offensive comments in public forums online contributes to toxic online environments and can perpetuate harm, discrimination, and hatred.
Therefore, while the online environment can serve as a platform for expressing dissent, seeking information, and promoting freedom, it is important to recognize the boundaries of ethical behavior and respect the rights and well-being of others.
To learn more about censorship click here : brainly.com/question/10437777
#SPJ11
Hi Dear Chegg Teacher, I've been practising this concept and nowhere have I seen a Karnaugh map with so many different variables.
How do I simplify this expression with a Karnaugh map? If there is any way you can help I would really appreciate it.
Use a K-map to simplify the Boolean expression E = A’B’C’D + A’CD + A’C’ + C
Answer:
Sure, I'd be happy to help!
A Karnaugh map (or K-map) is a useful tool in Boolean algebra to simplify expressions. It's used to minimize logical expressions in computer engineering and digital logic.
Your Boolean expression is `E = A’B’C’D + A’CD + A’C’ + C`. This is a 4-variable function, with variables A, B, C, and D. We will use a 4-variable K-map to simplify it.
A 4-variable K-map has 16 cells, corresponding to the 16 possible truth values of A, B, C, and D. The cells are arranged such that only one variable changes value from one cell to the next, either horizontally or vertically. This is known as Gray code ordering. Here's how the variables are arranged:
```
CD\AB | 00 | 01 | 11 | 10 |
---------------------------
00 | | | | |
01 | | | | |
11 | | | | |
10 | | | | |
```
Now, let's fill in the values from your expression:
1. `A’B’C’D`: This term corresponds to the cell where A=0, B=0, C=0, D=1. So, we will fill a "1" in this cell.
2. `A’CD`: This term corresponds to the cells where A=0, C=1, D=1. There are two cells that match this because B can be either 0 or 1. So, we will fill "1"s in both of these cells.
3. `A’C’`: This term corresponds to the cells where A=0, C=0. There are four cells that match this because B and D can be either 0 or 1. So, we will fill "1"s in all of these cells.
4. `C`: This term corresponds to the cells where C=1. There are eight cells that match this because A, B, and D can be either 0 or 1. So, we will fill "1"s in all of these cells.
After filling in the values, your K-map should look like this:
```
CD\AB | 00 | 01 | 11 | 10 |
---------------------------
00 | 1 | 1 | 1 | 1 |
01 | 1 | 1 | 1 | 1 |
11 | 1 | 1 | 1 | 1 |
10 | 1 | 1 | 1 | 1 |
```
Looking at the K-map, we see that all cells are filled with "1", which means your simplified Boolean expression is just `E = 1`. In other words, the function E is always true regardless of the values of A, B, C, and D.
In detail, state why the investigation on wireless
physical layer security is a must.
Investigation on wireless physical layer security is essential due to the increasing reliance on wireless communication systems and the vulnerabilities associated with wireless networks. Understanding the security challenges and developing effective countermeasures at the physical layer is crucial for protecting sensitive information, preventing eavesdropping, and ensuring secure transmission in wireless environments.
Wireless communication has become an integral part of our daily lives, with applications ranging from personal devices to critical infrastructure systems. However, wireless networks are susceptible to various security threats, including eavesdropping, jamming, and unauthorized access. These vulnerabilities arise from the broadcast nature of wireless transmissions, making it easier for attackers to intercept and manipulate data.
Investigating wireless physical layer security is necessary to address these challenges. The physical layer is the foundation of wireless communication, dealing with signal transmission, modulation, and reception. By understanding the physical characteristics of wireless channels and the vulnerabilities associated with them, researchers and practitioners can develop effective security mechanisms and countermeasures.
Research in this area aims to enhance the confidentiality, integrity, and availability of wireless communications. Techniques such as signal encryption, channel coding, spread spectrum, and beamforming are explored to improve security at the physical layer. Investigating wireless physical layer security is crucial to identify vulnerabilities, develop robust security solutions, and ensure the privacy and reliability of wireless networks in various domains, including IoT, smart cities, healthcare, and military applications.
Learn more about Investigating here: brainly.com/question/29353884
#SPJ11
2. A server group installed with storage devices from Vendor A experiences two failures across 20 devices over a period of 5 years. A server group using storage devices from Vendor B experiences one failure across 12 devices over the same period. Which metric is being tracked and which vendor’s metric is superior?
The metric being tracked in this scenario is the failure rate of storage devices.
The failure rate measures the number of failures experienced by a set of devices over a given period. In this case, the failure rate of Vendor A's devices is 2 failures across 20 devices over 5 years, while the failure rate of Vendor B's devices is 1 failure across 12 devices over the same period.
Based on the given information, we can compare the failure rates of the two vendors. Vendor A's failure rate is 2 failures per 20 devices, which can be simplified to a rate of 0.1 failure per device. On the other hand, Vendor B's failure rate is 1 failure per 12 devices, which can be simplified to a rate of approximately 0.0833 failure per device.
Comparing the failure rates, we can conclude that Vendor B's metric is superior. Their devices have a lower failure rate, indicating better reliability compared to Vendor A's devices. Lower failure rates are generally desirable as they imply fewer disruptions and potential data loss. However, it's important to consider additional factors such as cost, performance, and support when evaluating the overall superiority of a vendor's products.
Learn more about server here : brainly.com/question/29888289
#SPJ11
In terms of the metric being tracked (failure rate), Vendor B's metric is superior. The metric being tracked in this scenario is the failure rate of the storage devices.
A server group installed with storage devices from Vendor A has a failure rate of 2 failures across 20 devices over 5 years, while Vendor B has a failure rate of 1 failure across 12 devices over the same period. To determine which vendor's metric is superior, we need to compare their failure rates.
The failure rate is calculated by dividing the number of failures by the total number of devices and the time period. For Vendor A, the failure rate is 2 failures / 20 devices / 5 years = 0.02 failures per device per year. On the other hand, for Vendor B, the failure rate is 1 failure / 12 devices / 5 years = 0.0167 failures per device per year.
Comparing the failure rates, we can see that Vendor B has a lower failure rate than Vendor A. A lower failure rate indicates that Vendor B's storage devices are experiencing fewer failures per device over the given time period. Therefore, in terms of the metric being tracked (failure rate), Vendor B's metric is superior.
Learn more about server here : brainly.com/question/29888289
#SPJ11
Each iteration of the inner loop in the Java longest CommonSubstring() method compares two characters. If the characters match, the matrix entry's value is updated to 1 + ___ entry's value.
the upper left
the left
the lower right
the upper
In each iteration of the inner loop in the Java longestCommonSubstring() method, when two characters match, the matrix entry's value is updated to 1 plus the value of the upper left matrix entry.
The longestCommonSubstring() method in Java is typically used to find the length of the longest common substring between two strings. It involves creating a matrix where each cell represents a comparison between characters of the two strings.
During each iteration of the inner loop, if the characters at the corresponding positions in the two strings match, the matrix entry's value is updated to 1 plus the value of the upper left matrix entry. This is because the length of the common substring is incremented by 1 when the characters match, and the upper left value represents the length of the common substring without the current characters.
By updating the matrix entry with the value of 1 plus the upper left entry, the algorithm efficiently keeps track of the length of the longest common substring encountered so far.
Learn more about Java: brainly.com/question/30640453
#SPJ11
A quadratic algorithm with processing time T(n) =
cn2 spends 1 milliseconds for processing 100 data items.
How much time will be spent for processing n = 5000 data
items?
A quadratic algorithm with processing time T(n) = cn2 spends 1 milliseconds for processing 100 data items.the time required to process 5000 data items is 25 seconds. Answer: 25.
We are given that T(n) = cn²It is given that the time required for processing 100 data items is 1 millisecond.So, for n = 100, T(n) = c(100)² = 10⁴c (since 100² = 10⁴)So, 10⁴c = 1milliseconds => c = 10⁻⁴/10⁴ = 10⁻⁶Secondly, we need to find the time required to process n = 5000 items. So,T(5000) = c(5000)² = 25 × 10⁶ c= 25 seconds.So, the time required to process 5000 data items is 25 seconds. Answer: 25.
To know more about algorithm visit:
https://brainly.com/question/13383952
#SPJ11
Q1. (CLO 3) (5 marks, approximately: 50 - 100 words) a. Evaluate the 8 steps in the implementation of DFT using DIT-FFT algorithm. And provide two advantages of this algorithm. b. Compute the 8-point DFT of the discrete system h[n] = {1, 1, 1, 1, 1, 1, 1, 0}, Where n = 0 to N-1. 1. Using 8-point radix-2 DIT-FFT algorithm. 2. Using Matlab Code. 3. Obtain the transfer function H (z) of h[n] and discuss its ROC.
a. The 8 steps in the implementation of DFT using DIT-FFT algorithm are as follows:
Split the input sequence of length N into two sequences of length N/2.
Compute the DFT of the odd-indexed sequence recursively using the same DIT-FFT algorithm on a smaller sequence of length N/2, resulting in N/2 complex values.
Compute the DFT of the even-indexed sequence recursively using the same DIT-FFT algorithm on a smaller sequence of length N/2, resulting in N/2 complex values.
Combine the DFTs of the odd and even-indexed sequences using a twiddle factor to obtain the first half of the final DFT sequence of length N.
Repeat steps 1-4 on each of the two halves of the input sequence until only single-point DFTs remain.
Combine the single-point DFTs using twiddle factors to obtain the final DFT sequence of length N.
If the input sequence is real-valued, take advantage of the conjugate symmetry property of the DFT to reduce the number of required computations.
If the input sequence has a power-of-two length, use radix-2 DIT-FFT algorithm for further computational efficiency.
Two advantages of the DIT-FFT algorithm are its computational efficiency, particularly for power-of-two lengths, and its ability to take advantage of recursive computation to reduce the amount of memory required.
b. To compute the 8-point DFT of the discrete system h[n] = {1, 1, 1, 1, 1, 1, 1, 0}, we can use the 8-point radix-2 DIT-FFT algorithm as follows:
Step 1: Split the input sequence into two sequences of length N/2 = 4:
h_odd = {1, 1, 1, 1}
h_even = {1, 1, 1, 0}
Step 2: Compute the DFT of h_odd using the same algorithm on a smaller sequence of length N/2 = 4:
H_odd = {4, 0, 0+j4, 0-j4}
Step 3: Compute the DFT of h_even using the same algorithm on a smaller sequence of length N/2 = 4:
H_even = {3, 0, -1, 0}
Step 4: Combine H_odd and H_even using twiddle factors to obtain the first half of the final DFT sequence:
H_first_half = {4+3, 4-3, (0+4)-(0-1)j, (0-4)-(0+1)j} = {7, 1, 4j, -4j}
Step 5: Repeat steps 1-4 on each of the two halves until only single-point DFTs remain:
For h_odd:
h_odd_odd = {1, 1}
h_odd_even = {1, 1}
H_odd_odd = {2, 0}
H_odd_even = {2, 0}
For h_even:
h_even_odd = {1, 1}
h_even_even = {1, 0}
H_even_odd = {2, 0}
H_even_even = {1, -1}
Step 6: Combine the single-point DFTs using twiddle factors to obtain the final DFT sequence:
H = {7, 3+j2.4, 1, -j1.2, -1, -j1.2, 1, 3-j2.4}
c. To obtain the transfer function H(z) of h[n], we can first express h[n] as a polynomial:
h(z) = 1 + z + z^2 + z^3 + z^4 + z^5 + z^6
Then, we can use the z-transform definition to obtain H(z):
H(z) = Z{h(z)} = ∑_(n=0)^(N-1) h[n] z^(-n) = 1 + z^(-1) + z^(-2) + z^(-3) + z^(-4) + z^(-5) + z^(-6)
The region of convergence (ROC) of H(z) is the set of values of z for which the z-transform converges. In this case, since h[n] is a finite-duration sequence, the ROC is the entire complex plane: |z| > 0.
Note that the same result can be obtained using the DFT by taking the inverse DFT of H(z) over N points and obtaining the coefficients of the resulting polynomial, which should match the original h[n] sequence.
Learn more about algorithm here:
https://brainly.com/question/21172316
#SPJ11
(a) For each of the following statements, state whether it is TRUE or FALSE. FULL marks will
only be awarded with justification for either TRUE or FALSE statements.
(i) An AVL tree has a shorter height than a binary heap which contains the same n elements
in both structures.
(ii) The same asymptotic runtime for any call to removeMax() in a binary max-heap, whether
the heap is represented in an array or a doubly linked-list (with a pointer to the back).
(i) TRUE. An AVL tree is a self-balancing binary search tree in which the heights of the two child subtrees of any node differ by at most one
(ii) FALSE. The asymptotic runtime for removeMax() operation depends on the implementation of the binary max-heap.
(i) TRUE. An AVL tree is a self-balancing binary search tree in which the heights of the two child subtrees of any node differ by at most one. Therefore, AVL trees are guaranteed to have a logarithmic height, proportional to log(n), where n is the number of elements stored in the tree.
On the other hand, a binary heap is not necessarily balanced and its height can be as large as log(n) for a complete binary tree. Hence, an AVL tree has a shorter height than a binary heap with the same number of elements.
(ii) FALSE. The asymptotic runtime for removeMax() operation depends on the implementation of the binary max-heap. In an array-based binary heap, the maximum element can be removed in O(log n) time complexity by swapping with the last element and then performing a down-heapify operation. However, in a doubly linked-list representation, the maximum element can only be found by traversing the entire list, which takes O(n) time complexity, and then removing it takes O(1) time complexity. Therefore, the asymptotic runtime for removeMax() in a binary max-heap depends on the underlying data structure used for the implementation.
Learn more about binary search tree here:
https://brainly.com/question/13152677
#SPJ11
You are trying to design a piece of jewelry by drilling the core out of a sphere. Let’s say that (in some unitless measurements) you decide to use a sphere of radius r = 4 and a drill bit of radius r = 1. (a) Write the equations for the spherical surface and the cylindrical surface of the drill in rectangular coordinates (i.e. cartesian coordinates), assuming they are centered on the origin. (b) Draw each of the surfaces from part (a), separately; make sure to label reference points for scale (i.e. intercepts w/ axes). (c) In your coordinate system of choice, find where the two surfaces intersect. Express these intersection curves in terms of your chosen coordinates. (d) Express the volume outside of the cylinder and inside the sphere as a set of inequalities using the same coordinate system you used in part (c).
The intersection curves lie on the cylindrical surface with radius r = 1 and height h = ±√15.
(a) Equations for the spherical surface and the cylindrical surface in rectangular coordinates:
Spherical surface:
The equation for a sphere centered at the origin with radius r is given by:
x^2 + y^2 + z^2 = r^2
For the given sphere with radius r = 4, the equation becomes:
x^2 + y^2 + z^2 = 16
Cylindrical surface:
The equation for a cylinder with radius r and height h, centered on the z-axis, is given by:
x^2 + y^2 = r^2
For the given drill bit with radius r = 1, the equation becomes:
x^2 + y^2 = 1
(b) Drawing the surfaces:
Please refer to the attached image for the drawings of the spherical surface and the cylindrical surface. The reference points and intercepts with the axes are labeled for scale.
(c) Intersection curves:
To find the intersection between the spherical surface and the cylindrical surface, we need to solve the equations simultaneously.
From the equations:
x^2 + y^2 + z^2 = 16 (spherical surface)
x^2 + y^2 = 1 (cylindrical surface)
Substituting x^2 + y^2 = 1 into the equation for the spherical surface:
1 + z^2 = 16
z^2 = 15
z = ±√15
Therefore, the intersection curves occur at the points (x, y, z) where x^2 + y^2 = 1 and z = ±√15.
Expressing the intersection curves:
The intersection curves lie on the cylindrical surface with radius r = 1 and height h = ±√15.
To learn more about equation visit;
https://brainly.com/question/29657983
#SPJ11
A.What is the maximum core diameter for a fiber if it is to operate in single mode at a wavelength of 1550nm if the NA is 0.12?
B.A certain fiber has an Attenuation of 1.5dB/Km at 1300nm.if 0.5mW of Optical power is initially launched into the fiber, what is the power level in microwatts after 8km?
The maximum core diameter for the fiber to operate in single mode at a wavelength of 1550nm with an NA of 0.12 is approximately 0.0001548387.
To determine the maximum core diameter for a fiber operating in single mode at a wavelength of 1550nm with a given Numerical Aperture (NA), we can use the following formula:
Maximum Core Diameter = (2 * NA) / (wavelength)
Given:
Wavelength (λ) = 1550nm
Numerical Aperture (NA) = 0.12
Plugging these values into the formula, we get:
Maximum Core Diameter = (2 * 0.12) / 1550
Calculating the result:
Maximum Core Diameter = 0.24 / 1550
≈ 0.0001548387
Know more about Numerical Aperture here:
https://brainly.com/question/30389395
#SPJ11
Which collision resolution technique is negatively affected by the clustering of items in the hash table: a. Quadratic probing. b. Linear probing. c. Rehashing. d. Separate chaining.
The collision resolution technique that is negatively affected by the clustering of items in the hash table is linear probing.
n hash table, Linear Probing is the simplest method for solving collision problem. In Linear Probing, if there is a collision that means the hash function has to assign an element to the index where another element is already assigned, so it starts searching for the next empty slot starting from the index of the collision. Following are the steps to implement linear probing. Steps to insert data into a hash table:
Step 1: If the hash table is full, return from the function
Step 2: Find the index position of the input element using the hash function
Step 3: If there is no collision at the index position, then insert the element at the index position, and return from the function.
Step 4: If there is a collision at the index position, then check the next position. If the next position is empty, then insert the element at the next position, and return from the function.
Step 5: If the next position is also filled, repeat Step 4 until an empty position is found. If no empty position is found, return from the function.
Now, moving on to the answer of the given question, which collision resolution technique is negatively affected by the clustering of items in the hash table and the answer is Linear probing. In linear probing, the clustering of elements is bad because it can result in long clusters of occupied hash slots. Clustering of occupied slots can increase the probability of another collision. Therefore, the time to search for an empty slot also increases. In conclusion, the collision resolution technique that is negatively affected by the clustering of items in the hash table is Linear probing.
To learn more about collision resolution, visit:
https://brainly.com/question/12950568
#SPJ11
What data structure changes could be made to the Huffman
algorithm for improvements?
Improvements in the Huffman algorithm can be achieved by implementing certain data structure changes by using Huffman codes.
By knowing the reasons below:
One possible enhancement is the utilization of a priority queue instead of a simple array for storing the frequency counts of characters. This allows for efficient retrieval of the minimum frequency elements, reducing the time complexity of building the Huffman tree.
In the original Huffman algorithm, a frequency array or table is used to store the occurrence of each character. By using a priority queue, the characters can be dynamically sorted based on their frequencies, enabling easy access to the minimum frequency elements. This optimization ensures that the most frequent characters are prioritized during the tree construction process, leading to better compression efficiency.
Additionally, another modification that can enhance the Huffman algorithm is the incorporation of tree data structure for storing the Huffman codes. A trie offers efficient prefix-based searching and encoding, which aligns well with the nature of Huffman codes. By utilizing a trie, the time complexity for encoding and decoding operations can be significantly reduced, resulting in improved algorithm performance.
In summary, incorporating a priority queue and a trie data structure in the Huffman algorithm can lead to notable improvements in compression efficiency and overall algorithm performance.
To know more about Huffman codes visit:
brainly.com/question/31217710
#SPJ11
If the size of the main memory is 64 blocks, size of the cache is 16 blocks and block size 8 words (for MM and CM).. Assume that the system uses Direct mapping answer for the following. 1. Word field bit is *
a. 4.bits b. 6.bits c. Non above d. 3.bits e. Other:
Direct mapping is a type of cache mapping technique used in the cache memory. In this method, each block of main memory is mapped to a unique block in the cache memory. The correct answer to the given question which refers to the equivalent of one world field bit is option e. Other.
Given, Size of the main memory = 64 blocks
Size of the cache = 16 blocks
Block size = 8 words
Word field bit = *
We need to find the word field bit for direct mapping.
The number of word field bits in direct mapping is given by the formula:
word field bit = [tex]log_{2}(cache size/ block size)[/tex]
Substituting the given values, we get:
word field bit = [tex]log_{2}(16/8)[/tex]
word field bit = [tex]log_{2}(2)[/tex]
word field bit = 1
Therefore, the word field bit for direct mapping is 1, and the correct option is e) Other.
To learn more about Direct mapping, visit:
https://brainly.com/question/31850275
#SPJ11
Section-C (Choose the correct Answers) (1 x 2 = 2 4. Program to create a file using file writer in Blue-J. import java.io.FileWriter; import java.io. [OlException, IOException] public class CreateFile { public static void main(String[] args) throws IOException { // Accept a string String = "File Handling in Java using "+" File Writer and FileReader"; // attach a file to File Writer File Writer fw= FileWriter("output.txt"); [old, new] // read character wise from string and write // into FileWriter for (int i = 0; i < str.length(); i++) fw.write(str.charAt(i)); System.out.println("Writing successful"); //close the file fw. LO; [open, close] } }
The provided code demonstrates how to create a file using the FileWriter class in Java. It imports the necessary packages, creates a FileWriter object, and writes a string character by character to the file.
Finally, it closes the file. However, there are a few errors in the code that need to be corrected.
To fix the errors in the code, the following modifications should be made:
The line File Writer fw= FileWriter("output.txt"); should be corrected to FileWriter fw = new FileWriter("output.txt");. This creates a new instance of the FileWriter class and specifies the file name as "output.txt".
The line fw.LO; should be corrected to fw.close();. This closes the FileWriter object and ensures that all the data is written to the file.
After making these modifications, the code should work correctly and create a file named "output.txt" containing the specified string.
To know more about file handling click here: brainly.com/question/32536520
#SPJ11
A UNIX Fast File System has 32-bit addresses, 8 Kilobyte blocks and 15 block addresses in each inode. How many file blocks can be accessed: (5×4 points) a) Directly from the i-node? blocks. b) With one level of indirection? blocks. c) With two levels of indirection? - blocks. d) With three levels of indirection? blocks.
Answer: a) 15 blocks b) 2 blocks c) 4 blocks d) 8 blocks.
a) Direct blocks: Since each inode contains 15 block addresses, thus 15 direct blocks can be accessed directly from the i-node.
b) Indirect block: With one level of indirection, one more block is used to store addresses of 8KB blocks that can be accessed, thus the number of blocks that can be accessed with one level of indirection is: (8 * 1024)/(4 * 1024) = 2^1 = 2. Thus, 2 blocks can be accessed with one level of indirection.
c) Double indirect blocks: For each double indirect block, we need another block to store the addresses of the blocks that store the addresses of 8KB blocks that can be accessed. Thus the number of blocks that can be accessed with two levels of indirection is:(8 * 1024)/(4 * 1024) * (8 * 1024)/(4 * 1024) = 2^2 = 4. Thus, 4 blocks can be accessed with two levels of indirection.
d) Three indirect blocks: With three levels of indirection, we need one more block for every level and thus the number of blocks that can be accessed with three levels of indirection is:(8 * 1024)/(4 * 1024) * (8 * 1024)/(4 * 1024) * (8 * 1024)/(4 * 1024) = 2^3 = 8. Thus, 8 blocks can be accessed with three levels of indirection.
Know more about UNIX Fast File System, here:
https://brainly.com/question/31822566
#SPJ11
In C++ you are required to create a class called Circle. The class must have a data field called radius that represents the radius of the circle. The class must have the following functions:
(1) Two constructors: one without parameters and another one with one parameter. Each of the two constructors must initialize the radius (choose your own values).
(2) Set and get functions for the radius data field. The purpose of these functions is to allow indirect access to the radius data field
(3) A function that calculates the area of the circle
(4) A function that prints the area of the circle
Test your code as follows:
(1) Create two Circle objects: one is initialized by the first constructor, and the other is initialized by the second constructor.
(2) Calculate the areas of the two circles and displays them on the screen
(3) Use the set functions to change the radius values for the two circles. Then, use get functions to display the new values in your main program
Here's an example of a C++ class called Circle that meets the given requirements:
```cpp
#include <iostream>
class Circle {
private:
double radius;
public:
// Constructors
Circle() {
radius = 0.0; // Default value for radius
}
Circle(double r) {
radius = r;
}
// Set function for radius
void setRadius(double r) {
radius = r;
}
// Get function for radius
double getRadius() {
return radius;
}
// Calculate area of the circle
double calculateArea() {
return 3.14159 * radius * radius;
}
// Print the area of the circle
void printArea() {
std::cout << "Area: " << calculateArea() << std::endl;
}
};
int main() {
// Create two Circle objects
Circle circle1; // Initialized by first constructor
Circle circle2(5.0); // Initialized by second constructor with radius 5.0
// Calculate and display the areas of the two circles
std::cout << "Circle 1 ";
circle1.printArea();
std::cout << "Circle 2 ";
circle2.printArea();
// Change the radius values using set functions
circle1.setRadius(2.0);
circle2.setRadius(7.0);
// Display the new radius values using get functions
std::cout << "Circle 1 New Radius: " << circle1.getRadius() << std::endl;
std::cout << "Circle 2 New Radius: " << circle2.getRadius() << std::endl;
return 0;
}
```
Explanation:
- The `Circle` class has a private data field called `radius` to represent the radius of the circle.
- It includes two constructors: one without parameters (default constructor) and another with one parameter (parameterized constructor).
- The class provides set and get functions for the `radius` data field to allow indirect access to it.
- The `calculateArea` function calculates the area of the circle using the formula πr².
- The `printArea` function prints the calculated area of the circle.
- In the `main` function, two `Circle` objects are created: `circle1` initialized by the default constructor, and `circle2` initialized by the parameterized constructor with a radius of 5.0.
- The areas of the two circles are calculated and displayed using the `printArea` function.
- The set functions are used to change the radius values of both circles.
- The get functions are used to retrieve and display the new radius values.
When you run the program, it will output the areas of the initial circles and then display the new radius values.
Learn more about Object-Oriented Programming here: brainly.com/question/31741790
#SPJ11
Since x is a number in the set {0, 1, . . . , 2^ t}, we can write x in binary as: x = b0 · 2 ^0 + b1 · 2^ 1 + b2 · 2 ^2 + · · · + bt · 2^ t , (1) where bi are bits. If b0 = 0, then x = b1 · 2 ^1 + b2 · 2 ^2 + · · · + bt · 2 ^t = 2y, for some integer y, i.e., x is an even number. On the other hand, if b0 = 1, then x = 1 + b1 · 2 ^1 + b2 · 2 ^2 + · · · + bt · 2 ^t = 2y + 1, for some integer y, i.e., x is an odd number. Let m = 2^(t −1) .
(c) Show that if b0 = 0, then (g^ x )^ m ≡ 1 (mod p).(to do)
(d) Show that if b0 = 1, then (g ^x ) ^m ≡ p − 1 (mod p).(to do)
C) if b0 = 0, then (g^x)^m ≡ 1 (mod p).
D)if b0 = 1, then (g^x)^m ≡ p-1 (mod p).
To solve this problem, we need to use Fermat's Little Theorem, which states that if p is a prime number and a is an integer not divisible by p, then a^(p-1) ≡ 1 (mod p).
(c) If b0 = 0, then x = b1 · 2^1 + b2 · 2^2 + ... + bt · 2^t = 2y for some integer y. We can write (g^x)^m as ((g^2)^y)^m. Using the properties of exponents, we can simplify this expression as (g^2m)^y. Since m = 2^(t-1), we have:
(g^2m)^y = (g^(2^(t-1)*2))^y = (g^(2^t))^y
Using Fermat's Little Theorem with p, we get:
(g^(2^t))^y ≡ 1^y ≡ 1 (mod p)
Therefore, if b0 = 0, then (g^x)^m ≡ 1 (mod p).
(d) If b0 = 1, then x = 1 + b1 · 2^1 + b2 · 2^2 + ... + bt · 2^t = 2y+1 for some integer y. We can write (g^x)^m as g*((g^2)^y)^m. Using the properties of exponents, we can simplify this expression as g*(g^2m)^y. Since m = 2^(t-1), we have:
(g^2m)^y = (g^(2^(t-1)*2))^y = (g^(2^t))^y
Using Fermat's Little Theorem with p, we get:
(g^(2^t))^y ≡ (-1)^y ≡ -1 (mod p)
Therefore, if b0 = 1, then (g^x)^m ≡ p-1 (mod p).
Learn more about integer here:
https://brainly.com/question/31864247
#SPJ11
We discussed several implementations of the priority queue in class. Suppose you want to implement a system with many "insert" operations but only a few "remove the minimum" operations.
Which of the following priority queue implementations do you think would be most effective, assuming you have enough space to hold all items? (Select all that apply)
Max Heap.
Ordered array or linked list based on priority.
Unordered array or linked list.
Min Heap.
Regular queue (not priority queue) implemented using a doubly-linked list.
The most effective priority queue implementation, given the scenario of many "insert" operations and few "remove the minimum" operations, would be the Min Heap.
A Min Heap is a binary tree-based data structure where each node is smaller than or equal to its children. It ensures that the minimum element is always at the root, making the "remove the minimum" operation efficient with a time complexity of O(log n). The "insert" operation in a Min Heap also has a time complexity of O(log n), which is relatively fast.
The Max Heap, on the other hand, places the maximum element at the root, which would require extra steps to find and remove the minimum element, making it less efficient in this scenario.
The ordered array or linked list, as well as the unordered array or linked list, would have slower "remove the minimum" operations, as they would require searching for the minimum element.
The regular queue implemented using a doubly-linked list does not have a priority mechanism, so it would not be suitable for this scenario.
Therefore, the most effective priority queue implementation for this scenario would be the Min Heap.
Learn more about heap data structures here: brainly.com/question/29973376
#SPJ11
The \n escape sequence is called the _______ .
a) no escape character
b) null zero
c) newline character
d) backspace character
Answer:
c) Newline character is the correct answer
The Programming Language enum is declared inside the Programmer class. The Programmer class has a ProgrammingLanguage field and the following constructor: public Programmer(ProgrammingLanguage pl) 1 programminglanguage = pl; 1 Which of the following will correctly initialize a Programmer in a separate class? a. Programmer p= new Programmer(Programming Language PYTHON); b. Programmer p = new Programmer(Programmer.Programming language.PYTHON) c. Programmer p new Programmer(PYTHON"); d. Programmer p= new Programmer(PYTHON), e. none of these
The correct option for initializing a Programmer in a separate class is option (a) - Programmer p = new Programmer(ProgrammingLanguage.PYTHON).
In this option, we create a new instance of the Programmer class by calling the constructor with the appropriate argument. The argument "ProgrammingLanguage.PYTHON" correctly references the enum value PYTHON defined inside the ProgrammingLanguage enum.
Option (b) is incorrect because it uses the incorrect syntax for accessing the enum value. Option (c) is incorrect because it has a syntax error, missing the assignment operator. Option (d) is incorrect because it has a syntax error, missing the semicolon. Finally, option (e) is incorrect because option (a) is the correct way to initialize a Programmer object with the given enum value.
To know more about Programmer, visit:
https://brainly.com/question/31217497
#SPJ11