QuestionThe colours of red litmus paper in acidic, neutral, and basic solutions are:Ared, orange and blue respectivelyBblue, violet and red respectivelyCred, colourless and blue respectivelyDred, red and blue respectivelyHard

The mass in grams of 4.21 x 10²² atoms of sulfur is approximately 2.24 grams to the nearest tenth of a gram. We can do it in the following manner.

To determine the mass in grams of 4.21 x 10²² atoms of sulfur, we need to use the atomic mass of sulfur and the Avogadro's number.

The atomic mass of sulfur is approximately 32.06 g/mol, which means that one mole of sulfur contains 6.022 x 10²³ atoms. This is known as Avogadro's number.

Using Avogadro's number, we can calculate the mass of one sulfur atom as follows:

Mass of one sulfur atom = Atomic mass of sulfur / Avogadro's number

= 32.06 g/mol / 6.022 x 10²³ atoms/mol

= 5.32 x 10⁻²³ g/atom

Now, to calculate the mass of 4.21 x 10²² atoms of sulfur, we simply need to multiply the mass of one sulfur atom by the number of atoms:

Mass of 4.21 x 10^22 atoms of sulfur = (4.21 x 10²² atoms) x (5.32 x 10⁻²³g/atom)

= 2.24 g (to the nearest tenth of a gram)

Therefore, the mass in grams of 4.21 x 10²² atoms of sulfur is approximately 2.24 grams to the nearest tenth of a gram.

Learn more about sulfur here brainly.com/question/13147867

#SPJ4

Answer:

D. genetic modification

Explanation:

Out of the given examples, genetic modification represents the use of modern biotechnology. Genetic modification involves the direct manipulation of an organism’s DNA using biotechnology techniques to produce desired traits or characteristics. This is a relatively recent development in biotechnology and is used in various fields such as agriculture, medicine, and environmental science.

Bread making and cheese making are traditional food production techniques that have been used for centuries and do not necessarily involve modern biotechnology. Selective breeding is also a traditional technique that has been used for thousands of years to develop desired traits in plants and animals by choosing which individuals are allowed to reproduce.

The proper inlet port for the coolant water in a water-cooled West condenser is the bottom port.

A water-cooled West condenser is a device used to cool and condense solvent vapors during the process of heating reactions under reflux. This type of condenser is equipped with two ports for the inlet and outlet of coolant water. It has a glass outer tube and an inner tube made of either glass or PTFE (Polytetrafluoroethylene). The space between the two tubes is where the coolant water flows. This arrangement of tubes creates a space for the vapor to be cooled before it is condensed by the coolant water.

The proper inlet port for the coolant water in a water-cooled West condenser is the bottom port. This is because the coolant water flows from the bottom up towards the top. Therefore, introducing the coolant water into the bottom port will ensure that the water is flowing in the correct direction. In addition, the top port serves as the outlet port for the coolant water, allowing it to flow out of the condenser after it has absorbed the heat from the solvent vapors.

Learn more about water-cooled condenser here: https://brainly.com/question/29588006

#SPJ11

The compound I chose is salt, which is commonly known as table salt or sodium chloride. Its chemical formula is NaCl, which indicates that it is composed of one sodium atom (Na) and one chlorine atom (Cl).

The subscript numbers in the formula indicate the number of atoms of each element present in the compound. In the case of NaCl, there is one sodium atom and one chlorine atom, which gives us the formula NaCl.

The formula for salt can also be determined by analyzing the charges on the ions. Sodium (Na) is a metal that forms a positively charged ion (cation) with a charge of +1, while chlorine (Cl) is a nonmetal that forms a negatively charged ion (anion) with a charge of -1. In NaCl, the positive charge of the sodium ion is balanced by the negative charge of the chloride ion, resulting in a neutral compound with no overall charge.

Thus, based on the charges and valences of the elements involved, we can determine that the formula for salt is NaCl and that it contains one sodium atom and one chlorine atom.

To learn more about compounds refer to:

brainly.com/question/13516179

#SPJ4

The correct answer for study soil form is A. Sandy soil forms by sedimentary deposits after rocks are weathered, eroded and transported.

What is study soil?

Sandy soil is composed of relatively large mineral particles, such as sand, that have accumulated over time through a process of weathering, erosion, and transportation of rock materials. Over time, rocks are exposed to weathering agents such as wind, water, and temperature fluctuations, which break them down into smaller particles. The smaller particles are then transported by wind or water and deposited in a new location, where they can accumulate and form sandy soil.

Option B is incorrect because the rocks mentioned (limestone, granite, quartz, and shale) are not typically associated with sandy soil. Limestone and shale tend to form more clay-rich soils, while granite and quartz tend to form soils with a mix of particle sizes.

Option C is incorrect because the accumulation of dead and decayed organic matter leads to the formation of organic-rich soils, such as peat or muck soils, which are not typically sandy.

Option D is incorrect because the suspension of sediment in water column of a body of water is a process that forms sedimentary rocks, such as sandstone or shale, rather than sandy soil.

To know more about soil minerals, visit:

https://brainly.com/question/14983371

#SPJ1

The galvanic cell is powered by the redox reaction between zinc and tin ions. At the cathode of the cell, reduction occurs and electrons are gained. In this case, the reduction half-reaction is Sn2+(aq) + 2e- → Sn(s).

At the anode of the cell, oxidation occurs and electrons are lost. In this case, the oxidation half-reaction is Zn(s) → Zn2+(aq) + 2e-.

E1 is the reduction potential of the tin half-reaction, which is -0.14 V. E2 is the oxidation potential of the zinc half-reaction, which is -0.76 V.

In solution S1, which is the electrolyte for the anode, there are zinc ions and sulfate ions. The chemical species in solution S2, which is the electrolyte for the cathode, are tin ions and sulfate ions.

Overall, the galvanic cell produces a flow of electrons from the anode to the cathode through the external circuit, while the ions in the electrolyte move from the anode to the cathode through the salt bridge. This creates a potential difference or voltage, that can be used to power an external device.

Find out more about  galvanic cells

at brainly.com/question/29976793

#SPJ4

Inertia is the tendency of an object to resist changes in its state of motion. If an unbalanced force affects an object, several predictions can be made about possible changes in the straight line motion of the object:

1. The object will accelerate: If an unbalanced force acts on an object, the object will accelerate in the direction of the force. The greater the force, the greater the acceleration.

2. The object will change its velocity: If the force acting on the object is not in the same direction as its velocity, the object will change its velocity. The change in velocity will be in the direction of the force.

3. The object will change its direction: If the force acting on the object is perpendicular to its velocity, the object will change its direction. The object will move in a curved path.

4. The object will continue to move in a straight line: If the force acting on the object is balanced, the object will continue to move in a straight line at a constant velocity.

5. The object will stop moving: If the force acting on the object is greater than the force of friction, the object will eventually stop moving.

The migrants of a charged particle up against such a concentration gradient is connected to the process that Na+-NQR catalyses in vivo.

An electrochemical Na+ gradient is produced by the NADH-ubiquinone oxidoreductase (Na+-NQR), which pumps Na+ and transfers electrons from NADH to ubiquinone. This gradient is necessary for bacterium enzymes that need energy.

The respiratory system of V. cholerae has an oxidative sodium pump called the Na+-translocating Nicotinamide adenine dinucleotide phosphate oxidoreductase (NQR). In addition to facilitating the movement of Na+ across the membrane, NQR stimulates the electron movement from NADH to ferredoxin (13).

To know more about catalyses visit:

https://brainly.com/question/20065526

#SPJ1

Answer:

The balanced chemical equation is:

Mg + 2 HCl ➞ MgCl2 + H2

From the equation, we see that 1 mole of Mg reacts with 2 moles of HCl. So, to determine how many moles of Mg reacted with 2.26 moles of HCl, we divide 2.26 moles by 2:

2.26 moles HCl / 2 = 1.13 moles Mg

Now we can use the molar mass of Mg to convert moles of Mg to grams:

1.13 moles Mg x 24.31 g/mol = 27.49 grams Mg

Therefore, if 2.26 moles of HCl were reacted, then 27.49 grams of Mg were used in the reaction.

I Hope This Helps!

The mass percent of the LiCl solution is 57.303%.

According to the question we have,

Mass of LiCl solution = 34.876 g

Mass of dry sample obtained = 12.698 g

To calculate the mass percent of LiCl solution, we will use the following formula:

Mass percent = (Mass of solute / Mass of solution) × 100%

Let's calculate the mass of LiCl in the solution. As we know, the dry sample obtained after heating the solution is the solute. So, Mass of LiCl = Mass of dry sample obtained = 12.698 g

Now, we need to calculate the mass of the solution, which can be calculated by subtracting the mass of LiCl from the mass of the solution.

So,

Mass of solution = Mass of LiCl solution - Mass of LiCl= 34.876 g - 12.698 g= 22.178 g

Putting values in the formula:

Mass percent = (Mass of LiCl / Mass of solution) × 100%= (12.698 g / 22.178 g) × 100%= 57.303 %

Therefore, the mass percent of the LiCl solution is 57.303 %.

Learn more about mass percent on:

https://brainly.com/question/13896694

#SPJ11

In a liquid state, where they have greater energy, water molecules travel more swiftly and essentially bounce against one another than they do in a solid form. When the liquid cools, potential energy diminishes.

During freezing, a substance's temperature stays constant while the liquid's dissolved particles transform into crystalline solids. Energy escapes during freezing because liquid particles have more energy then particles in a solid. The environment receives this energy's discharge.

Gas molecules are far more energetic and disperse than liquid molecules do. Since warm water has much more energy that cold water, warm water molecules travel more quickly than cold water molecules.

To know more about liquid visit:

https://brainly.com/question/20922015

#SPJ1

Answer:

d < c < a < b

Explanation:

The molar mass of a compound is the sum of the atomic masses of all the atoms in its chemical formula. Here are the molar masses of the four compounds you have:

a. SiH4: (1 × 28.09 g/mol) + (4 × 1.01 g/mol) = 32.13 g/mol

b. Co: 58.93 g/mol

c. CH3OH: (1 × 12.01 g/mol) + (4 × 1.01 g/mol) + (1 × 16.00 g/mol) = 32.05 g/mol

d. C2H6: (2 × 12.01 g/mol) + (6 × 1.01 g/mol) = 30.07 g/mol

So, from smallest to largest molar mass, the order is: d < c < a < b.

The labeled carbon in the fatty acid, 14CH₃(CH₂)15COOH, is located at the omega (ω) end of the molecule, which is the last carbon atom.

Therefore, upon oxidation of this fatty acid, the labeled carbon would not enter the citric acid cycle directly, but rather undergoes beta-oxidation to yield acetyl-CoA. During beta-oxidation, two-carbon units are cleaved from the fatty acid chain and converted to acetyl-CoA. Thus, the 14C label would eventually end up in acetyl-CoA.

The other compounds listed (beta-hydroxybutyryl-CoA, malonyl-CoA, propionyl-CoA, and bicarbonate) are not intermediates in beta-oxidation and would not contain the radiolabeled carbon from the fatty acid.

To learn more about fatty acid refer to:

brainly.com/question/1837143

#SPJ4

Symptoms are subjective changes felt by the patient, while signs are objective changes observed by the physician. Both are important in the diagnosis and treatment of disease.

Symptoms and signs are two terms used in medicine to describe the various manifestations of a disease. While they are often used interchangeably, they actually refer to different things. Symptoms refer to changes or sensations that are felt by the patient, while signs are changes that are observed by the physician during a physical examination or through medical tests. Symptoms are subjective experiences reported by the patient, such as pain, fatigue, dizziness, or nausea. Symptoms are often what prompt a patient to seek medical attention in the first place. They can vary widely between different diseases and even between different individuals with the same disease. For example, a patient with a viral infection may experience symptoms such as fever, headache, and body aches, while another patient with the same infection may only experience a mild sore throat. Signs, on the other hand, are objective findings observed by the physician during a physical examination or through medical tests. Examples of signs include a rash, an abnormal heart sound, or an enlarged liver. Signs can also include abnormal laboratory values such as elevated blood pressure or low blood sugar levels. Unlike symptoms, signs are not subjective and can be measured or observed directly by the physician.

In summary, symptoms are changes or sensations felt by the patient, while signs are changes observed by the physician during a physical examination or through medical tests. While symptoms can be specific for a particular disease, they are not always present, and can vary widely between individuals. Signs, on the other hand, are more objective and can provide important diagnostic information for the physician.

To know more about disease please refer: https://brainly.com/question/27133193

#SPJ1

The electron-domain geometry of a species is the arrangement of electron around the central atom, whereas the molecular geometry is the arrangement of bonded atoms.

Electron-domain geometry refers to the arrangement of the electron pairs (both bonding and non-bonding) around the central atom in a molecule. It is also called the molecular geometry or the electron-pair geometry.

This geometry determines the spatial arrangement of the atoms in a molecule and influences the overall shape of the molecule. The electron-domain geometry is determined by the number of electron pairs around the central atom and the arrangement that minimizes the repulsion between these electron pairs.

Common electron-domain geometries will include linear, octahedral, tetrahedral, trigonal bipyramidal, and trigonal planar.

To know more about electron-domain geometry here

https://brainly.com/question/11298860

#SPJ4

Lithium is the element that reacts more vigorously with water to produce hydrogen gas.

Explanation: The reactivity of metals with water is referred to as "metal-water reaction." Hydrogen gas is produced when a metal reacts with water. Lithium, which is an alkali metal, is highly reactive and will react with water at normal temperatures; hence, it is the most reactive of the alkali metals. Beryllium, on the other hand, does not react with water because its surface is protected by an oxide layer formed by air. The reaction of lithium with water produces a white solid compound known as lithium hydroxide and hydrogen gas. The reaction equation is as follows: 2Li(s) + 2H2O(l) → 2LiOH(aq) + H2(g)The reaction is highly exothermic and releases a lot of heat. As a result, the hydrogen produced may ignite, and the reaction may become explosive. This makes lithium highly reactive with water, producing hydrogen gas as well as fire. This is the reason why lithium metal is usually stored in oil to protect it from the water vapor present in the atmosphere.

Learn more about element would react more vigorously with water at: brainly.com/question/29457858

#SPJ11

The concentration of the Pb (in ppb) that comes out of the such the  faucet. The ksp for the PbCO₃ is 7.4 x 10⁻¹⁴ is 2.7 x 10⁻⁷ M.

The chemical equation is as :

PbCO₃(s)  ⇄ Pb²⁺(aq)   +   CO₃²⁻(aq)

The equilibrium constant expression is:

Ksp =  [Pb²⁺][CO₃²⁻]  = 7.4 x 10⁻¹⁴

Let  we use  the x  for  the  amount  of  the each  of  these  ions  present in  the  equilibrium  constant formula :

The Ksp is expressed as :

Ksp =  [Pb²⁺][CO₃²⁻]  

Where,

The Ksp = 7.4 x 10⁻¹⁴

 7.4 x 10⁻¹⁴ =  (x)(x)

 7.4 x 10⁻¹⁴ =  x²

x = 2.7 x 10⁻⁷ M

The concentration of the Pb is 2.7 x 10⁻⁷ M.

To learn more about concentration here

https://brainly.com/question/28560440

#SPJ4

The labels in the correct sequence that indicating the order reversible reaction will occur in within the pulmonary capillaries are :

HCO₃⁺ + H⁺ --->  H₂CO₃  --->  H₂O  --->  CO₂

The Deoxygenated blood with high levels of the carbon dioxide enters in the capillaries of surrounding the alveoli. The Oxygen from the alveoli will diffuses across in the alveolar capillary membrane and the binds to the hemoglobin in the red blood cells.

The Carbon dioxide diffuses from the red blood cells in the alveoli. The Oxygenated blood leaves in the capillaries and then returns to heart and be pumped to rest of the body. The Deoxygenated blood with the low levels of the carbon dioxide and returns to the heart and be pumped to lungs again.

To learn more about pulmonary capillaries here

https://brainly.com/question/9490582

#SPJ4

In polystyrene, phenyl group attached to the polymer chain causes some deviation from perfect tetrahedral geometry, leading to slight distortion in the polymer chain.

Process of reacting monomer molecules together in chemical reaction to form the polymer chains or three-dimensional networks is known as polymerization.

Polyacrylonitrile (Orlon) is a polymer formed by addition polymerization of acrylonitrile molecules. Here is an example of a segment of polyacrylonitrile:

      H

        |

-H2C=CH-C≡N

        |

        n

In polymerization process, carbon-carbon double bond of acrylonitrile undergoes a chemical reaction called addition polymerization, where double bond is broken, and each monomer unit adds onto polymer chain, creating new single bond between two carbon atoms. As a result, carbon atoms in polymer chain become sp3 hybridized, with tetrahedral geometry.

Polystyrene is another synthetic polymer formed by the polymerization of styrene molecules. Here is an example of a segment of polystyrene:

           H

           |

   H2C=CH-Ph

           |

           n

In the polymerization process, carbon-carbon double bond of styrene undergoes a chemical reaction called addition polymerization, similar to the reaction that occurs in  polymerization of acrylonitrile. The double bond is broken, and each monomer unit adds onto polymer chain, creating new single bond between the two carbon atoms. As a result, carbon atoms in polymer chain become sp3 hybridized, with tetrahedral geometry.

To know more about polymerization, refer

https://brainly.com/question/1602388

#SPJ1

The isotope used to date young, organic material is carbon-14.

Carbon-14 is the isotope used to date young, organic material. It breaks down relatively quickly and has a half-life of about 5,700 years.

Carbon-14 is constantly being formed in the upper atmosphere through the interaction of cosmic rays with nitrogen, and it is taken up by plants during photosynthesis.

Animals then consume plants and incorporate the carbon-14 into their own bodies. When an organism dies, the carbon-14 begins to decay, and by measuring the amount of carbon-14 remaining in a sample, scientists can determine how long ago the organism died.

Carbon-14 dating is most effective for organic materials up to about 50,000 years old.

More on carbon dating can be found here: https://brainly.com/question/22184593

#SPJ1

The empirical formula of this vanadium oxide can be calculated using the following equation:

n(V) = (mass sample x molar mass V)/(final mass - mass sample) x molar mass O

n(V) = (.3546 g x 50.94 g/mol) / (0.6330 g - .3546 g) x 16.00 g/mol

n(V) = 0.66

Therefore, the empirical formula of the vanadium oxide is V2O3.

For more questions related to empirical formula, refer here:

https://brainly.com/question/14044066#

#SPJ11

The percent ionization of a 0.337 M HF solution can be calculated using the Ka of HF, which is 3.5 x 10-4.

The percentage oxidized indicates what proportion of the starting substance has been converted into ions.

As a result, we evaluate the concentration of the ion in solution by contrasting it to the initial concentration of the neutral species.

In a particular solution of a mild acid, the percentage of ionization will change depending on the initial concentration of the acid, and it will get lower as the concentration of the acid gets higher.

1. Write the ionization equilibrium expression for HF:
  HF ⇌ H+ + F-
  Ka = [H+][F-] / [HF]

2. Assume 'x' is the concentration of H+ and F- ions at equilibrium, so:
  Ka = (x)(x) / (0.337 - x)

3. Plug in the given Ka value (3.5 x 10^-4) and solve for 'x':
  3.5 x 10^-4 = (x)(x) / (0.337 - x)

4. Solving for 'x' using a calculator or a suitable approximation method, you will get the value of 'x', which represents the equilibrium concentration of H+ ions.

5. Calculate the percent ionization by dividing the concentration of H+ ions (x) by the initial concentration of HF (0.337 M) and multiplying by 100:
  % ionization = (x / 0.337) x 100

Using this method, you can find the percent ionization of the 0.337 M HF solution.

To know more about the percent ionization https://brainly.com/question/29651327

#SPJ11

To raise the pH to 5.75 approximately 1.996 mL of 5.50 M NaOH should be added to the buffer.

Given to us is:

pH = 5.75

pKa = 4.76

[HA] = 0.0180 M (acetic acid)

[A-] = 0.0275 M (sodium acetate)

The volume of the buffer solution = 610.0 mL

To calculate the amount of 5.50 M NaOH needed to raise the pH of the buffer solution to 5.75, we need to use the Henderson-Hasselbalch equation and consider the pKa of acetic acid. The pKa of acetic acid is 4.76.

The Henderson-Hasselbalch equation is:

pH = pKa + log([A-]/[HA])

Here:

[A-] represents the concentration of acetate ions (sodium acetate) and [HA] represents the concentration of acetic acid.

First, we need to calculate the ratio of [A-]/[HA] using the Henderson-Hasselbalch equation:

5.75 = 4.76 + log(0.0275/0.0180)

1.00 = log(1.5278)

Now, we can calculate the amount of 5.50 M NaOH needed to raise the pH:

moles of acetic acid = 0.0180 M × 0.6100 L = 0.01098 moles

Since the ratio of [A-]/[HA] is 1, the number of moles of sodium acetate needed is also 0.01098 moles.

To neutralize the acetic acid, we need the same number of moles of hydroxide ions from NaOH.

moles of NaOH needed = 0.01098 moles

Now we can calculate the volume of 5.50 M NaOH needed:

volume of 5.50 M NaOH = moles of NaOH / concentration of NaOH

volume of 5.50 M NaOH = 0.01098 moles / 5.50 M = 0.001996 L or 1.996 mL

Therefore, approximately 1.996 mL of 5.50 M NaOH should be added to the buffer to raise the pH to 5.75.

Learn more about the Henderson-Hasselbalch equation here:

https://brainly.com/question/31495136

#SPJ 12

Chemists use molarity to express concentration of solutions because it is convenient to determine molar concentration which helps us to find volume of the solution and weight of the solute.

Because it is simple and practical to apply, chemists express the concentration of solutions using molarity. It is possible to weigh the solute in grammes, convert its weight to moles, and combine it with a volume. The total molar concentration is equal to the molar concentrations added together.

Molarity is calculated as the number of moles of solute divided by the volume of the solution, and the volume of a solution depends on its density, which is a function of temperature.

Molarity = number of moles (n) / volume (L)

Due to its close association to moles, a term that connects the bulk measurement of substances to the microscopic and symbolic representations of chemistry, molarity is particularly beneficial to chemists.

To know more about molarity, refer:

https://brainly.com/question/21497047

#SPJ4

The KHP be completely dissolved before beginning the titration because only the solute is involved in the reaction that is used to find the concentration of the solution in a titration process.

The solution's concentration will not be correct if the KHP crystals are not entirely dissolved before beginning the titration. The solution's concentration will not be correct if the KHP crystals are not entirely dissolved before beginning the titration. Only the solute is involved in the reaction that is used to find the concentration of the solution in a titration process, not the undissolved crystals.

The KHP should be entirely dissolved before beginning the titration because KHP is a solid and, like any other solid, must be entirely dissolved in water before the actual titration. The reaction rate slows down as the amount of solid used in the reaction increases. Even a small amount of undissolved KHP may cause the solution to be inaccurate. Therefore, it is recommended that the KHP be entirely dissolved in water before the titration process starts.

Learn more about titration at:

https://brainly.com/question/13307013

#SPJ11

The final temperature is 280.59 degrees Celsius.

The term atmospheres (atm), defined as follows: A mercury column one millimetre high would impose a pressure of one atm, or 1.01325 x 105 Pa. millimetres of mercury (mmHg). One atmosphere of pressure is generated by a mercury column that is 760 mm high. Because pressure and force are connected, you may use the physics equation to compute one if you know the other.

P1V1/T1 = P2V2/T2

Where P1, V1, and T1 are the initial pressure, volume, and temperature, and P2, V2, and T2 are the final pressure, volume, and temperature.

Given:

Initial pressure (P1) = 1.015 atm

Initial volume (V1) = 9.00 L

Initial temperature (T1) = -211.76 °C (62.39 K)

Mass of hydrogen gas initially (m1) = 2.035 g

Additional mass of hydrogen gas added (m2) = 2.099 g

Final pressure (P2) = 20.15 atm

PV = nRT

n1 = m1/MH2 = 2.035 g / 2.016 g/mol = 1.011 mol

n2 = m1/MH2 + m2/MH2 = 2.035 g / 2.016 g/mol + 2.099 g / 2.016 g/mol = 2.059 mol

We can assume that the volume of the container is constant, so we can set V1 = V2 in the combined gas law equation:

P1/T1 = P2/T2

Solving for T2:

T2 = P2T1V1 / (P1*V2)

Substituting the values:

V2 = V1 = 9.00 L

T2 = (20.15 atm)(62.39 K)(9.00 L) / (1.015 atm)(2.059 mol)(8.314 J/(mol*K))

T2 = 553.75 K or 280.59 °C

To know more about temperature visit:-

https://brainly.com/question/30863015

#SPJ1

Question:

A container holds 2.035 grams of hydrogen gas at a pressure of 1.015 atm and a temperature of -211.76 °C. What will be the temperature in °C if an additional 2.099 grams of hydrogen gas is added to the container and the pressure increases to 20.15 atm?

According to the given statement The volume of the dry gas at STP is 0.259 L (259 ml).

A gas with an extremely straightforward connection between pressures, volume, and temp called an ideal gas. An ideal gas's volume and pressure are directly inversely correlated with its molecular weight and absolute temperature. Temperature and pressure in such an ideal gas are inversely correlated.

P = 789.8 mmHg = 789.8 torr

V = 256 ml

T = 25 + 273.15 = 298.15 K (temperature in Kelvin)

Having isolated the moles of gas and written the ideal gas law,

n = PV/(RT)

= (1.0382 atm) * (0.256 L) / [(0.0821 L•atm/(mol•K)) * (298.15 K)]

= 0.0111 mol

At STP, an ideal gas has a molar volume of 22.4 L. The molar volume is used as a conversion factor to determine the volume of the dry gas at STP.

P = 1 atm

T = 273.15 K

n = 0.0111 mol

V = nRT/P

= (0.0111 mol) * (0.0821 L•atm/(mol•K)) * (273.15 K) / (1 atm)

= 0.259 L

Therefore, the volume of the dry gas at STP is 0.259 L (259 ml).

To know more about Ideal gas visit:

https://brainly.com/question/28257995

#SPJ1

The degree of dissociation of water at 298 K is 1.8 x 10-16.

What is dissociation?

Dissociation, also known as ionization, is a chemical process in which ions or molecules split into smaller particles, such as atoms, ions, or radicals.

For example, when an acid is dissolved in water, it is dissociated, producing hydrogen ions that give the solution an acidic nature.

When it comes to the dissociation of water, the following equation is used:

H2O ↔ H+ + OH-

The degree of dissociation is the extent to which a compound is ionized in solution.

The extent of ionization, represented by, is a dimensionless quantity that varies between 0 and 1.

The extent of dissociation is defined as follows:

α = (number of moles of dissociated ions)/(number of moles of the original substance)

At a specific temperature, each electrolyte has its own degree of dissociation.

Since water is a weak electrolyte, its degree of dissociation is very low, just about 1.8 x 10-16.

To know more about the Dissociation https://brainly.com/question/30961097

#SPJ11

life span of each star according to shortest to longest:-

star              Lifespan
Rigel             7 to 9 million year
Canopus      30 million year
Achernar     37.3 million year
Capella A    590-650 million year
Sirius A       1 billion year
sun              10 billion year
the primary series is the stage where a celebrity spends most of its existence. Relative to different levels in a star's "life" it's far extraordinarily lengthy; our sun took about 20 million years to form but will spend about 10 billion years (1 × 1010 years) as a first-rate collection star earlier than evolving into a crimson large.

To realize greater about life span click on here
Brainly.com/question/4324220
#SPJ4

8.55 mL of the concentrated acid. To make a 0.285 m hydroiodic acid solution from a stock solution of 12.0 m hydroiodic acid, you must add 8.55 mL of concentrated acid to obtain a total volume of 100 mL of the dilute solution.

Steps-
1. Determine the amount of moles in the desired solution:
Moles = concentration (m) x volume (L)
Moles = 0.285 M x 0.100 L = 0.0285 moles

2. Determine the amount of moles in the stock solution:
Moles = concentration (m) x volume (L)
Moles = 12.0 M x 0.0085 L = 0.102 moles

3. Calculate the amount of concentrated acid needed:
Amount of concentrated acid = (moles in desired solution / moles in stock solution) x volume of stock solution
Amount of concentrated acid = (0.0285 moles / 0.102 moles) x 0.0085 L = 8.55 mL

Learn more about concentrated acid - brainly.com/question/881692

#SPJ11