The prefixes cis- and trans- are used to describe stereoisomers, which are molecules that have the same molecular formula and connectivity but differ in their spatial arrangement. The correct answer is option c.
Specifically, they are used to describe molecules that have a carbon-carbon double bond or a ring structure.
Cis- and trans- indicate the type of stereoisomer, specifically geometric isomers. Cis- is used to describe molecules in which the two groups attached to the carbons of the double bond are on the same side, while trans- is used to describe molecules in which the two groups are on opposite sides of the double bond.
For example, in the molecule [tex]2-butene[/tex], there are two possible arrangements of the methyl ([tex]CH3[/tex]) and hydrogen (H) groups around the carbon-carbon double bond. If the two methyl groups are on the same side of the double bond, the molecule is called [tex]cis-2-butene[/tex]. If the two methyl groups are on opposite sides of the double bond, the molecule is called [tex]trans-2-butene[/tex].
The correct answer is option c.
To know more about stereoisomer refer to-
https://brainly.com/question/31147524
#SPJ11
A decomposition of hydrogen peroxide into water and oxygen gas is an exothermic reaction. If the temperature is initially 28˚ C, what would you expect to see happen to the final temperature?Explain what is happening in terms of energy of the system and the surroundings.
This indicates that the system's energy drops while the energy of the environment grows. As a result, the ultimate temperature is projected to be greater than the beginning temperature of 28 degrees Celsius.
What happens in exothermic reaction?The process sends heat into the environment since it is exothermic. The heat produced by the reaction is transferred to the surrounding environment, raising the temperature.
This is due to the fundamental rule of thermodynamics, which states that energy cannot be created or destroyed, but only moved from one form to another. In this case, the energy released by the reaction is transferred to the surrounding environment as heat energy, causing the temperature to rise.
Find out more on decomposition here: https://brainly.com/question/14608831
#SPJ1
why is iron widely extracted in the industries
Answer: it's an integral component of steel
Explanation: it's also an economic essential to US growth and is used for transportation, energy, and construction
What is the pH if the pOH is 14
The acidity or alkalinity of a solution depends upon its hydronium ion concentration and hydroxide ion concentration. The pH scale is introduced by Sorensen. The pH is 0 when the pOH is 14.
The pH of a solution is defined as the negative logarithm to the base 10 of the value of the hydronium ion concentration in moles per litre.
We have the equation:
pH + pOH = 14
pH = 14 - pOH = 14 - 14 = 0
So the pH is 0.
To know more about pH, visit;
https://brainly.com/question/15215569
#SPJ1
How many grams are there in 7.250 x 1094 atoms of Magnesium, Mg?
Answer:
7.250 x 1094 atoms of Magnesium, Mg is equal to 0.008038 grams.
I hope this helps you
a student proposes the following step of a mechanism. why would an expert question this mechanism step? 3 a b → 2 c
An expert might question the proposed mechanism step due to:
1. Lack of reaction conditions
2. Lack of experimental evidence
3. Thermodynamic feasibility
4. Kinetic feasibility
5. Stereochemical considerations.
an expert might question the proposed step of the mechanism:
1. Lack of reaction conditions: The expert may question the proposed mechanism step because there is no mention of the reaction conditions. Without knowing the reaction conditions, it is impossible to predict whether the proposed mechanism step is feasible or not.
2. Lack of experimental evidence: The expert may question the proposed mechanism step if there is no experimental evidence to support it. Experimental evidence is necessary to validate any proposed mechanism step.
3. Thermodynamic feasibility: The expert may question the proposed mechanism step if it violates the laws of thermodynamics. The proposed step should be energetically favorable and should not require a large input of energy.
4. Kinetic feasibility: The expert may question the proposed mechanism step if it violates the laws of kinetics. The proposed step should be consistent with the rate of the overall reaction.
5. Stereochemical considerations: The expert may question the proposed mechanism step if it violates stereochemical considerations. The proposed step should be consistent with the observed stereochemistry of the reaction products.
These are just a few possible reasons why an expert might question the proposed step of the mechanism.
Visit to know more about thermodynamic feasibility:-
https://brainly.com/question/31252614
#SPJ11
13. Lab Analysis: You forgot to label your chemicals and do not know whether your unknown solution is strontium nitrate or magnesium nitrate. You use the solutions potassium carbonate and potassium sulfate in order to determine your mistake. unknown + potassium carbonate & unknown + potassium sulfate . What do you observe when the unknown solution is mixed with potassium sulfate? (Can you see the shape underneath?)
if the unknown solution is mixed with potassium carbonate, the reaction will proceed differently depending on whether the unknown solution is strontium nitrate or magnesium nitrate.
Mixing the unknown solution with potassium sulfate will not provide any useful information to identify whether the unknown solution is strontium nitrate or magnesium nitrate. This is because neither strontium nor magnesium sulfate has distinctive properties that allow them to be easily distinguished from one another.
However, When mixed with strontium nitrate, potassium carbonate will form a white precipitate of strontium carbonate, while no reaction will occur when mixed with magnesium nitrate. Therefore, the presence of a white precipitate after mixing with potassium carbonate indicates that the unknown solution is strontium nitrate.
In summary, to identify whether the unknown solution is strontium nitrate or magnesium nitrate, the solution should be mixed with potassium carbonate. If a white precipitate forms, the solution is strontium nitrate. If no reaction occurs, the solution is magnesium nitrate. Mixing the unknown solution with potassium sulfate will not provide any useful information.
For more such questions on magnesium, click on:
https://brainly.com/question/30333465
#SPJ11
What is the answer of the ice cream activity of integration
The ice cream activity of integration is that it demonstrates how integration can be used to find the area under a curve or the total quantity of a certain variable, such as the amount of ice cream consumed.
This activity involves plotting the ice cream consumption over time on a graph, with the x-axis representing time and the y-axis representing the amount of ice cream consumed. The curve formed by the data points represents the rate of ice cream consumption.
The goal of this activity is to find the total amount of ice cream consumed during a specific time interval. To do this, you can use integration, which is a mathematical technique for finding the area under a curve.
By integrating the function that describes the curve, you can determine the total ice cream consumed during the given time period. This activity helps to illustrate the concept and application of integration in real-life situations.
To know more about integration click on below link:
https://brainly.com/question/30900582#
#SPJ11
2NaNO3 + PbO → Pb(NO3)2 + Na₂O
What is the mole ratio between
sodium nitrate and sodium oxide?
[?] mol NaNO3
mol Na₂O
Fill in the green blank.
Enter
The mole ratio of [tex]NaNO_3[/tex] to [tex]Na_2O[/tex] is 2:1 in the balanced equation
The reasonable compound condition[tex]2NaNO_3 + PbO → Pb(NO_3)_2 + Na_2O[/tex] shows that two moles of sodium nitrate[tex](NaNO_3)[/tex] respond with one mole of lead oxide [tex](PbO)[/tex]to create one mole of sodium oxide [tex]Na_2O[/tex] and one mole of lead nitrate[tex](Pb(NO_3)_2)[/tex] .
In this way, the mole proportion of [tex]NaNO_3[/tex] to [tex]Na_2O[/tex]is 2:1. This intends that for each two moles of [tex]NaNO_3[/tex] utilized, one mole of[tex]Na_2O[/tex] is delivered.
This mole proportion is significant in deciding how much [tex]Na_2O[/tex]delivered when a known measure of [tex]NaNO_3[/tex] is utilized. For instance, assuming we have 2 moles of [tex]NaNO_3[/tex], we can establish that we will deliver 1 mole of [tex]Na_2O[/tex]. Assuming that we have 4 moles of[tex]NaNO_3[/tex] , we will create 2 moles of [tex]Na_2O[/tex].
Knowing the mole proportion likewise permits us to compute the hypothetical yield of [tex]Na_2O[/tex] in light of how much [tex]NaNO_3[/tex] utilized. In any case, practically speaking, the genuine yield might contrast because of exploratory mistake or different elements.
To learn more about mole ratio between
sodium nitrate and sodium oxide, refer:
https://brainly.com/question/15219260
Answer:
Explanation:
it's 2:1 the top person is right and how i know that is because when i was in school i have my notes so the top of me is right!!! :)
How many grams of iron(III) sulfate, Fe2(SO4)3, are produced in the reaction if 2. 25 moles of hydrogen gas are produced? (round two decimal places)
The mass of iron(III) sulfate comes out to be 899.73 g, the calculations are shown below.
Considering, the moles of Fe₂(SO₄)₃ to be 2.25 moles.
Molar mass of Fe₂(SO₄)₃ = 399.88 g/mol.
To calculate the number of moles, the below formula is used-
Number of moles = Mass/molar mass
Substituting the known values in the above equation as follows-
2.25 moles = Mass / 399.88 g/mol
Mass = 2.25 moles x 399.88 g/mol
= 899.73 g
Therefore, the mass of iron(III) sulfate comes out to be 899.73 g.
To learn more about molar mass check the link below-
https://brainly.com/question/837939
#SPJ4
If the bond length in a XY molecule is 212, what will be the covalent radius of atom X, if the covalent radius of Y atom is 93.
The covalent radius of atom X in an XY molecule with a bond length of 212 and covalent radius of Y atom being 93 is 119.
To find the covalent radius of atom X, we need to understand that the bond length of an XY molecule is equal to the sum of the covalent radii of atoms X and Y. We can represent this relationship using the formula: bond length = covalent radius of X + covalent radius of Y.
Given that the bond length of the XY molecule is 212, and the covalent radius of Y is 93, we can use the formula to find the covalent radius of X:
212 = covalent radius of X + 93
To find the covalent radius of X, we can simply subtract the covalent radius of Y from the bond length:
covalent radius of X = 212 - 93
covalent radius of X = 119
So, the covalent radius of atom X is 119.
To know more about covalent radius click on below link:
https://brainly.com/question/14656068#
#SPJ11
How could you prepare the following compound using a starting material that contains no more than three carbons? CH3CH2CHCHCH, with an NH2 group attached to the third (from left to right) carbon, a CH3 group attached to the fourth carbon, and an oxygen atom double-bonded to the fifth carbon
Start with 2-methylpropene ([tex]CH_3CHCH_2CH_3[/tex]) and perform an acid-catalyzed hydration reaction to form 3-methyl-2-butanol ([tex]CH_3CHCH(OH)CH_3[/tex]).
What is hydration?Hydration is the process of providing water to the body and replenishing the fluids lost through physical activity, sweating, or illness. Hydration is essential for our bodies to function properly and also to maintain a healthy lifestyle. Hydration helps our bodies regulate temperature, lubricate and cushion joints, protect organs and tissues, and help to rid our bodies of waste. It is important to stay hydrated by drinking plenty of water throughout the day, especially when out in the heat, exercising, or sick. Additionally, increasing your intake of fruits and vegetables can help to boost hydration, as they contain high amounts of water and electrolytes.
Then perform a nucleophilic substitution reaction with ammonia to form 3-amino-2-methylbutyl alcohol ([tex]CH_3CHCH(NH_2)CH_3[/tex]). Finally, perform a dehydration reaction to form 3-amino-2-methylbut-2-ene [tex](CH_3CHCH(NH_2)CH=CH_2).[/tex]
To learn more about hydration
https://brainly.com/question/11112492
#SPJ4
Here are the atomic masses of hypothetical elements:
X = 13. 25 amu
Y = 69. 23 amu
Z = 109. 34 amu
What is the % composition by mass of Y in the hypothetical compound
with formula X2Y5Z3?
Enter your answer to two decimal places. Do not include the % sign, just
the numerical answer.
The percentage composition by mass of Y in the hypothetical compound X2Y5Z3 is 34.53%.
To calculate the percentage composition by mass of Y in the hypothetical compound X2Y5Z3, we first need to calculate the total molar mass of the compound:
Total molar mass = (2 moles of X x 13.25 amu/mole) + (5 moles of Y x 69.23 amu/mole) + (3 moles of Z x 109.34 amu/mole)
Total molar mass = 26.50 amu + 346.15 amu + 328.02 amu
Total molar mass = 700.67 amu
Next, we can calculate the percentage composition by mass of Y:
percentage composition by mass of Y = (mass of Y / total molar mass) x 100%
percentage composition by mass of Y = (5 moles of Y x 69.23 amu/mole / 700.67 amu) x 100%
percentage composition by mass of Y = 34.53%
Therefore, the percentage composition by mass of Y in the hypothetical compound X2Y5Z3 is 34.53%.
Know more about Percentage Composition here:
https://brainly.com/question/11952337
#SPJ11
Which describes the enthalpy change associated with an endothermic reaction?.
An endothermic reaction is one that absorbs heat from its surroundings, resulting in an increase in the system's internal energy.
Therefore, the enthalpy change associated with an endothermic reaction is positive. The energy required to break the bonds in the reactants is greater than the energy released when new bonds are formed in the products, resulting in a net absorption of energy.
The enthalpy change is a measure of the heat energy released or absorbed during a chemical reaction, and it is often used to determine whether a reaction is exothermic or endothermic.
In the case of an endothermic reaction, the products have more internal energy than the reactants, and the enthalpy change is positive.
Some examples of endothermic reactions include melting ice, evaporating water, and photosynthesis. In all of these reactions, heat is absorbed from the surroundings, resulting in a positive enthalpy change.
Understanding the enthalpy change associated with a reaction is important in fields such as thermodynamics, chemical engineering, and materials science.
To know more about endothermic reaction refer to-
https://brainly.com/question/23184814
#SPJ11
At 25°c the rate constant for the first-order decomposition of a pesticide solution is 6. 40 × 10–3 min–1. If the starting concentration of pesticide is 0. 0314 m, what concentration will remain after 62. 0 min at 25°c?.
The concentration of pesticide remaining after 62.0 minutes at 25°C is 0.0191 M.
The first-order rate law for a reaction can be expressed as:
[tex]ln([A]/[A]₀) = -kt[/tex]
Where [A] is the concentration of the reactant at any given time, [A]₀ is the initial concentration, k is the rate constant, and t is the time elapsed.
Using the given rate constant of [tex]6.40 × 10^(-3) min^(-1)[/tex]and the initial concentration of 0.0314 M, we can plug in the values and solve for [A] after 62.0 minutes:
[tex]ln([A]/0.0314) = -(6.40 × 10^(-3) min^(-1)) × (62.0 min)[/tex]
Solving for [A], we get:
[tex][A] = 0.0314 × e^(-(6.40 × 10^(-3) min^(-1)) × (62.0 min))[/tex]
[A] = 0.0191 M
Therefore, the concentration of pesticide remaining after 62.0 minutes at 25°C is 0.0191 M.
To know more about pesticide refer to-
https://brainly.com/question/31600813
#SPJ11
How many grams of oxygen (O2) is required to burn 28. 8 g of ammonia (NH3)?
4NH3 + 7O2 → 4NO2 + 6H2O
Molar Masses
NH3=17. 0305 g/mol
O2=31. 998 g/mol
NO2=46. 0055 g/mol
H2O=18. 0153 g/mol
a)15. 3 g
b)94. 9 g
c)54. 1 g
d)108 g
The number of grams of oxygen required is 94.9 g, under the condition that it is used to burn 28. 8 g of ammonia (NH₃)
NH₃ + 7O₂ → 4NO₂ + 6H₂O,
then the correct answer for the required question is Option B.
Now, the balanced chemical equation for the reaction of ammonia (NH₃) and oxygen (O₂) to create nitrogen dioxide (NO₂) and water (H₂O) is
4NH₃ + 7O₂ → 4NO₂ + 6H₂O
The given molar mass of NH₃ is 17.0305 g/mol and that of O₂ is 31.998 g/mol.
In order to find out how many grams of O₂ are required to burn 28.8 g of NH₃, we have to first balance the equation:
4 NH₃+ 7O₂ → 4NO₂ + 6H₂O
Then there are 4 moles of NH₃, we need 7 moles of O₂.
Hence, molar mass of NH₃ is 17.0305 g/mol, so we can change 28.8 g of NH₃ to moles
28.8 g NH₃ × (1 mol NH₃/17.0305 g NH₃)
= 1.69 mol NH₃
Now we have to apply stoichiometry to evaluate how many moles of O₂ are required
1.69 mol NH₃ × (7 mol O₂/4 mol NH₃)
= 2.95 mol O₂
Therefore, we can convert moles of O₂ to grams:
2.95 mol O₂ × (31.998 g O₂/1 mol O₂)
= 94.9 g
To learn more about Molar mass
https://brainly.com/question/837939
#SPJ4
The complete question is
How many grams of oxygen (O2) is required to burn 28. 8 g of ammonia (NH3)?4NH3 + 7O2 → 4NO2 + 6H2O
Molar Mass
NH3=17. 0305 g/mol
O2=31. 998 g/mol
NO2=46. 0055 g/mol
H2O=18. 0153 g/mol
a)15. 3 g
b)94. 9 g
c)54. 1 g
d)108 g
The diagram shows the temperature of a sample of water as heat is added.
What part of the diagram represents the heating of water vapor?
Temperature
فو
Energy
The diagram illustrates the relationship between energy and temperature in a sample of water.
It shows that as energy is added, the temperature of the water increases until it reaches a point where the water changes state, demonstrating the importance of understanding the thermal properties of water in various scientific fields.
The diagram that shows the temperature of a sample of water as heat is added is an illustration of the thermal properties of water. As energy is added to the system, the temperature of the water increases until it reaches a point where it begins to change state.
The process of adding energy to the water is called heating, and the energy that is added is called heat. The amount of heat required to raise the temperature of water depends on its mass, specific heat capacity, and the temperature difference between the initial and final temperatures.
In the diagram, the temperature of the water increases gradually as heat is added until it reaches a point where the water begins to boil. At this point, the temperature of the water remains constant even as more heat is added, and the energy is used to break the bonds between the water molecules, resulting in the conversion of liquid water to steam.
For more such questions on temperature
https://brainly.com/question/4735135
#SPJ11
1: calculate the ph of a 0.25m solution of h3o+
2: calculate the ph of a 6.3x10-8m solution of h3o+
3: look at your answer for 4 and 5 which one is a base?
4: look at 4 and 5 which one is a strong acid
please show your work
The pH of a 6.3 x [tex]10^{-8[/tex]M solution of H₃O+ is approximately 7.20.
A 0.25 M solution of H₃O+ is not a strong acid, since it is not a single acid that completely dissociates in water.
A 6.3 x [tex]10^{-8[/tex] M solution of H₃O+ is not a strong acid, since it is a very weak acid with a very low concentration of H₃O+ ions.
The pH of a 0.25 M solution of H₃O+ can be calculated using the formula:
pH = -log[H₃O+]
where [H₃O+] is the concentration of H₃O+ ions in moles per liter (M).
In this case, [H3O+] = 0.25 M,
pH = -log(0.25) = 0.602
Therefore, the pH of a 0.25 M solution of H₃O+ is approximately 0.602.
The pH of a 6.3 x [tex]10^{-8[/tex] M solution of H₃O+ can be calculated using the same formula:
pH = -log[H₃O+]
In this case, [H₃O+] = 6.3 x [tex]10^{-8[/tex]M, so we have:
pH = -log(6.3 x [tex]10^{-8[/tex]) = 7.20
Therefore, the pH of a 6.3 x [tex]10^{-8[/tex] M solution of H₃O+ is approximately 7.20.
There is no information given for question 3.
A strong acid is an acid that completely dissociates in water to produce H₃O+ ions. The most common example of a strong acid is hydrochloric acid (HCl).
Looking at the given solutions:
A 0.25 M solution of H₃O+ is not a strong acid, since it is not a single acid that completely dissociates in water.
A 6.3 x [tex]10^{-8[/tex] M solution of H₃O+ is not a strong acid, since it is a very weak acid with a very low concentration of H₃O+ ions.
Therefore, neither of the given solutions is a strong acid.
To know more about strong acid
https://brainly.com/question/31143763
#SPJ4
A reaction must be spontaneous if its___ occurrence is thermic with an___ crease in entropy
A reaction must be spontaneous if its occurrence is exothermic with an increase in entropy.
For a reaction to be spontaneous, two factors are considered: enthalpy change (ΔH) and entropy change (ΔS). A spontaneous reaction usually has a negative ΔH, indicating that it is exothermic (releases heat).
Additionally, a spontaneous reaction has a positive ΔS, meaning there is an increase in entropy (disorder) in the system. The combination of these two factors, along with temperature (T), determines the Gibbs free energy change (ΔG), where ΔG = ΔH - TΔS.
A negative ΔG value signifies that the reaction is spontaneous. Therefore, a reaction with an exothermic occurrence and an increase in entropy is more likely to be spontaneous.
To know more about Gibbs free energy click on below link:
https://brainly.com/question/13318988#
#SPJ11
If you are given a 0. 29 g piece of sodium metal to react with water, how many moles of hcl would it take to neutralize the sodium hydroxide produced?.
It would take 0.0252 moles of HCl to neutralize the sodium hydroxide produced.
The balanced equation for the reaction of sodium with water is:
[tex]2Na(s) + 2H2O(l) → 2NaOH(aq) + H2(g)[/tex]
From this equation, we can see that 2 moles of NaOH are produced for every mole of Na that reacts.
The molar mass of Na is 22.99 g/mol. Therefore, 0.29 g of Na represents:
0.29 g / 22.99 g/mol = 0.0126 mol Na
So, this amount of sodium will produce:
2 x 0.0126 mol NaOH = 0.0252 mol NaOH
Since NaOH is a strong base, it will completely react with HCl in a 1:1 ratio according to the equation:
[tex]NaOH(aq) + HCl(aq) → NaCl(aq) + H2O(l)[/tex]
So, 0.0252 mol of NaOH will react with 0.0252 mol of HCl.
Therefore, it would take 0.0252 moles of HCl to neutralize the sodium hydroxide produced.
To know more about neutralize refer to-
https://brainly.com/question/27891712
#SPJ11
HELP CHEMISTRY!! What does the hump in the middle of each energy diagram represent? (exothermic & endothermic diagrams)
Answer:
Activation Energy
Explanation:
I know you dont need this
Help what’s the answer?
The number of moles in 1.16 × 10³g of Fe₂O₃ is 7.26 moles.
How to calculate number of moles?The number of moles in a substance can be calculated by dividing the mass of the substance by its molar mass as follows:
no of moles = mass ÷ molar mass
According to this question, 1.16 × 10³ grams of iron (II) oxide is given. The molar mass of this compound is 159.69 g/mol.
no of moles in Fe₂O₃ = 1160g ÷ 159.69g/mol = 7.26 moles.
Learn more about no. of moles at: https://brainly.com/question/26416088
#SPJ1
How many liters would be in 7.65 moles of a gas!
7.65 moles of gas at STP would occupy a volume of approximately 171.36 liters.
To find out how many liters are in 7.65 moles of a gas, you will need to use the Ideal Gas Law equation, which is:
PV = nRT
In this equation:
P = pressure of the gas
V = volume of the gas in liters
n = number of moles of the gas
R = ideal gas constant (0.0821 L atm/mol K)
T = temperature in Kelvin
However, since we are not given the values for pressure (P) and temperature (T), we cannot calculate the exact volume (V) in liters for 7.65 moles of a gas.
If we assume standard temperature and pressure (STP) conditions, which are 0°C (273.15 K) and 1 atm, we can use the molar volume of a gas at STP, which is 22.4 liters/mol.
To calculate the volume in liters at STP, you can use the following formula:
V = n × molar volume at STP
Now, plug in the values:
V = 7.65 moles × 22.4 liters/mol
V ≈ 171.36 liters
So, under STP conditions, 7.65 moles of gas would be approximately 171.36 liters.
Learn more about moles at https://brainly.com/question/29367909
#SPJ11
How many moles of Ca(OH)2 are needed to
neutralize three moles of HCI?
1.5 mole of Ca(OH)[tex]_2[/tex] are needed to neutralize 2 moles of HCI. The mole idea is a useful way to indicate how much of a substance there is.
The mole idea is a useful way to indicate how much of a substance there is. Any measurement can be divided into two components: the magnitude in numbers and the units in which the magnitude is expressed. For instance, the magnitude is "2" and the unit is "kilogramme" when a ball's mass is determined to be 2 kilogrammes.
Ca(OH)[tex]_2[/tex] + 2HCl → CaCl[tex]_2[/tex] + 2H[tex]_2[/tex]O
1 mole of Ca(OH)[tex]_2[/tex] are needed to neutralize 2 moles of HCI.
so, 1.5 mole of Ca(OH)[tex]_2[/tex] are needed to neutralize 2 moles of HCI.
To know more about mole, here:
https://brainly.com/question/31597231
#SPJ1
During a Solar eclipse, the ___________is blocking the light from the __________ so a shadow appears on the ___________.
During a lunar eclipse, the _________is blocking the light from the ________so a shadow appears on the _________.
Lunar eclipses are more able to be seen because the Earth is __________ than the ________.
When a solar eclipse occurs, do not look directly at the sun because the light will harm you. There is no fill in the blank. All you have to do is type OK. ________
During a solar eclipse, the Moon is blocking the light from the Sun so a shadow appears on the Earth.
What is Solar eclipse?
A solar eclipse occurs when the Moon passes between the Sun and the Earth, and as a result, the Moon casts a shadow on the Earth's surface. This happens only during a New Moon phase, when the Moon is on the same side of the Earth as the Sun and its shadow falls on the Earth's surface.
There are two types of shadows that the Moon casts on the Earth during a solar eclipse: the umbra and the penumbra. The umbra is the darker central region of the shadow where the Sun is completely blocked by the Moon, while the penumbra is the lighter outer region where the Sun is only partially blocked by the Moon.
Learn more about Solar eclipse, visit;
https://brainly.com/question/1077760
#SPJ4
Limestone (CaCO;) is decomposed by heating to (quicklime (Ca) and carbon dioxide. Calculate how many grams of quicklime can be produced from 1.0 kg of limestone.
The mass (in grams) of quick lime, CaO that can be produced from the reaction is 560 g
How do i determine the mass of quick lime, CaO produced?First, we shall write the balanced equation for the reaction. This is given below:
CaCO₃ -> CaO + CO₂
Now, we shall obtain the mass of quick lime, CaO produced from the reaction can be obtain as illustrated below:
CaCO₃ -> CaO + CO₂
Molar mass of CaCO₃ = 100 g/molMass of CaCO₃ from the balanced equation = 1 × 100 = 100 g Molar mass of CaO = 56 g/molMass of CaO from the balanced equation = 1 × 56 = 56 gFrom the balanced equation above,
100 g of limestone, CaCO₃ decomposed to produce 56 g of quick lime, CaO
Therefore,
1 Kg (i.e 1000 g) of limestone, CaCO₃ will decompose to produce = (1000 × 56) / 100 = 560 g of quick lime, CaO
Thus, the mass of quick lime, CaO produced is 560 g
Learn more about mass produced:
https://brainly.com/question/9526265
#SPJ1
How would you classify this reaction?
CF4 -> C+2F₂
A. redox
B. double replacement
The reaction is a decomposition reaction
How to know the class of reactionThe given reaction is not a redox (oxidation-reduction) reaction because there is no change in oxidation number of any of the atoms in the reaction.
Also, it is not a double replacement reaction as there are no ions or compounds being exchanged between the reactants.
This is a decomposition reaction, where one compound (CF4) is breaking down into two simpler substances (C and F2).
A decomposition reaction is a type of chemical reaction where a single compound breaks down into two or more simpler substances. In a decomposition reaction, a compound is broken down into its constituent elements or simpler compounds.
The reaction can be represented by a chemical equation where the reactant is the compound that is breaking down, and the products are the simpler substances formed as a result of the reaction.
The general formula for a decomposition reaction is:
AB → A + B
where AB is the compound that is decomposing, and A and B are the simpler substances formed as a result of the reaction.
Learn more about decomposition reaction at
https://brainly.com/question/27300160
#SPJ1
What type of acid-base reactions are solely defined by how protons are given up or are taken?
what is a hydroxide ion?
what two products do all acid-base neutralization reactions produce
calculate the ph of a 0.25m solution of h3o+
calculate the ph of a 6.3x10-8m solution of h3o+
look at your answer for 4 and 5 which one is a base?
look at 4 and 5 which one is a strong acid
Type of Acid-Base Reactions: Acid-Base Neutralization Reactions. A hydroxide ion (OH-) is an anion with a single hydrogen atom and two oxygen atoms.
What is hydrogen ?Hydrogen is the lightest of all elements, and is a colorless, odorless, tasteless, non-metallic gas. It is the most abundant element in the universe, making up around 75% of all matter. Hydrogen has three isotopes: protium (the most common), deuterium, and tritium. Hydrogen is found on Earth in compounds of other elements, such as water (H2O), and in hydrocarbons, such as natural gas (CH4). It is a key component of many fuels and can be used to generate electricity through fuel cells.
All acid-base neutralization reactions produce a salt and water. The salt will depend on the acid and base used in the reaction.The pH of a 0.25M solution of H3O+ is 0.The pH of a 6.3x10-8M solution of H3O+ is 7.21.The pH of 0.25M solution of H3O+ (0) is a base, while the pH of 6.3x10-8M solution of H3O+ (7.21) is neutral.The pH of 0.25M solution of H3O+ (0) is a strong acid, while the pH of 6.3x10-8M solution of H3O+ (7.21) is a weak acid.
To learn more about hydrogen
https://brainly.com/question/24433860
#SPJ4
If a piece of aluminum that is 3.90 g and at 99.3°C is dropped into 10.0 g of water at 22.6°C, the final temperature is 28.6°C. What is the specific heat capacity of aluminum?
To solve for the specific heat capacity of aluminum, we can use the formula:
q = m × c × ΔT, Where q is the heat transferred, m is the mass, c is the specific heat capacity, and ΔT is the change in temperature.
First, we need to calculate the heat transferred from the aluminum to the water:
q = mAl × cAl × ΔTAl
q = (3.90 g) × cAl × (28.6°C - 99.3°C)
q = -978 J
Note that we get a negative value for q because heat is transferred from the aluminum to the water, so the aluminum loses heat.
Next, we can calculate the heat gained by the water:
q = mwater × cwater × ΔTwater
q = (10.0 g) × cw × (28.6°C - 22.6°C)
q = 240 J
Setting these two equations equal to each other, we can solve for the specific heat capacity of aluminum:
mAl × cAl × ΔTAl = mwater × cwater × ΔTwater
cAl = (mwater × cw × ΔTwater) / (mAl × ΔTAl)
cAl = (10.0 g) × (4.184 J/g·°C) × (28.6°C - 22.6°C) / [(3.90 g) × (99.3°C - 28.6°C)]
cAl = 0.900 J/g·°C
Therefore, the specific heat capacity of aluminum is 0.900 J/g·°C.
For more questions on: capacity
https://brainly.com/question/27862577
#SPJ11
2. find the mass in grams of 3.12 moles ca(no3)2.
The mass in grams of 3.12 moles of [tex]Ca(NO_3)_2[/tex] is approximately 511.52 g.
The molar mass of [tex]Ca(NO_3)_2[/tex] can be calculated by adding up the atomic masses of its constituent atoms. Ca has a molar mass of 40.08 g/mol, N has a molar mass of 14.01 g/mol, and O has a molar mass of 16.00 g/mol. Therefore, the molar mass of [tex]Ca(NO_3)_2[/tex] can be calculated as:
Molar mass = 1(40.08 g/mol) + 2(14.01 g/mol) + 6(16.00 g/mol)
Molar mass = 164.09 g/mol
To find the mass in grams of 3.12 moles of [tex]Ca(NO_3)_2[/tex], we can use the following equation:
Mass = moles × molar mass
Substituting the given values, we get:
Mass = 3.12 mol × 164.09 g/mol
Mass = 511.5168 g
To know more about molar mass, here
brainly.com/question/22997914
#SPJ4
How many grams of calcium hydroxide will be formed in this reaction when 4.44 g of calcium oxide and 7.77 g of water are available to react? also identify the limiting an excess reactants. how much excess reactant is left over in grams?
Answer:
please provide more información or a photo
Explanation:
Of you want me to hwlp you please have more infor like a picture