Therefore, the total temperature after exiting the turbine is 984.44 K, and the total pressure at the turbine exit is 394651.09 Pa.
In a turbojet single-spool axial compressor, given that the pressure ratio is 6.0, the efficiency of the compressor is 0.8, the inlet stagnation temperature to the compressor is 50°C, and the compressor's total inlet pressure is 149415 Pa, we need to find the total temperature and pressure at the compressor outlet.
Given that,Pressure Ratio = P2/P1 = 6.0Efficiency = η = 0.8Total Inlet Pressure = P1 = 149415 PaInlet Stagnation Temperature = T0 = 50°CGiven the above data, the first thing we need to do is find the temperature at the compressor outlet (T2) using the following formula:$$\frac{T_2}{T_1} = \left[\left(\frac{P_2}{P_1}\right)^{\frac{k-1}{k}} -1 \right] / η_c + 1$$Where,T1 = 50 + 273 = 323 KP2 = P1 * Pressure Ratio = 149415 * 6 = 896490 PaCp/Cv = k = 1.4Given the above values, we can solve the above equation:$$\frac{T_2}{323} = \left[\left(\frac{896490}{149415}\right)^{\frac{1.4-1}{1.4}} -1 \right] / 0.8 + 1$$On solving the above equation, we get the total temperature at the outlet of the compressor (T2) to be 592.87 K.
Next, we need to find the total pressure at the compressor outlet (P2) using the following formula:$$\frac{P_2}{P_1} = \left(\frac{T_2}{T_1}\right)^\frac{k}{k-1}$$On substituting the above values, we get the total pressure at the outlet of the compressor (P2) to be 896490 Pa.
Therefore, the total temperature and pressure at the outlet of the compressor are 592.87 K and 896490 Pa, respectively.
Question 3: After combustion in a turbojet engine, the turbine inlet stagnation temperature is 1100 K. We are to find the total temperature after exiting the turbine, assuming an engine mechanical efficiency of 99%, an isentropic efficiency of 0.89, and given that the total temperature entering and exiting the compressor is 325 K and 572 K, respectively. The total pressure at the turbine inlet is 896490 Pa. We are also to calculate the total pressure at the turbine exit.
Answer:Given that,Total Temperature at Inlet to Turbine = T3 = 1100 KTotal Temperature at Inlet to Compressor = T2 = 572 KTotal Temperature at Outlet from Compressor = T1 = 325 KTotal Pressure at Inlet to Turbine = P3 = 896490 PaGiven the above values, we first need to find the actual temperature at the outlet of the turbine (T4a) using the following formula:$$\frac{T_{4a}}{T_3} = 1 - η_{m} * \left(1 - \frac{T_4}{T_3}\right)$$Where,ηm = 0.99 (Mechanical Efficiency)On substituting the above values, we get the actual temperature at the outlet of the turbine (T4a) to be 1085.09 K.
Next, we need to find the temperature at the outlet of the turbine (T4) using the following formula:$$\frac{T_4}{T_{4a}} = \frac{T_{3s}}{T_3}$$$$T_{3s} = T_2 * \left(\frac{T_3}{T_2}\right)^{\frac{k-1}{k*\eta_c}}$$Where,ηc = 0.89 (Isentropic Efficiency)k = 1.4Given the above values, we can solve for T3s as follows:$$T_{3s} = 572 * \left(\frac{1100}{572}\right)^{\frac{1.4-1}{1.4*0.89}}$$$$T_{3s} = 835.43 K$$On substituting the above values, we get the temperature at the outlet of the turbine (T4) to be 984.44 K.
Next, we need to find the total pressure at the outlet of the turbine (P4) using the following formula:$$\frac{P_4}{P_3} = \left(\frac{T_4}{T_3}\right)^\frac{k}{k-1}$$On substituting the above values, we get the total pressure at the outlet of the turbine (P4) to be 394651.09 Pa.
Therefore, the total temperature after exiting the turbine is 984.44 K, and the total pressure at the turbine exit is 394651.09 Pa.
To know more about turbine visit:
https://brainly.com/question/31731732
#SPJ11
The Brackett series in the hydrogen emission spectrum is formed by electron transitions from ni > 4 to nf = 4.
What is the longest wavelength in the Brackett series?
...nm
What is the wavelength of the series limit (the lower bound of the wavelengths in the series)?
...nm
Therefore, for the longest wavelength in the Brackett series, ni > 4 and nf = 4. Hence, the largest value of n that can be used in the above equation is 5. Substituting this in the above equation gives:1/λ = RH [ (1/22²) - (1/5²) ] ⇒ λ = 2.166 x 10⁻⁶ m..
The longest wavelength in the Brackett series of the hydrogen emission spectrum is 2.166 × 10⁻⁶ m.The shortest wavelength in the Brackett series of the hydrogen emission spectrum is 4.05 × 10⁻⁷ m. Hence, the wavelength of the series limit (the lower bound of the wavelengths in the series) is 4.05 × 10⁻⁷ m.How to arrive at the above answer:The wavelengths in the Brackett series can be given by the following equation: 1/λ = RH [ (1/22²) - (1/n²) ], where λ is the wavelength of the emitted photon, RH is the Rydberg constant (1.097 x 10⁷ /m), and n is the principal quantum number of the electron in the initial state. Therefore, for the longest wavelength in the Brackett series, ni > 4 and nf = 4. Hence, the largest value of n that can be used in the above equation is 5. Substituting this in the above equation gives:1/λ = RH [ (1/22²) - (1/5²) ] ⇒ λ = 2.166 x 10⁻⁶ m. Similarly, for the wavelength of the series limit, the value of n that can be used in the above equation is infinity (since the electron can ionize). Substituting this in the above equation gives:1/λ = RH [ (1/22²) - (0) ] ⇒ λ = 4.05 x 10⁻⁷ m.
To know more about large number visit:
https://brainly.com/question/31961423
#SPJ11
A 150,000 kg space probe is landing on an alien planet with a gravitational acceleration of 10.00. If its fuel is ejected from the rocket motor at 37,000 m/s what must the mass rate of change of the space ship (delta m)/( delta t) be to achieve at upward acceleration of 2.50 m/s ∧
2 ? Remember to use the generalized form of Newton's Second Law. Your Answer:
The required mass rate of change (Δm/Δt) of the space probe to achieve an upward acceleration of 2.50 m/[tex]s^2[/tex] is approximately 10.1351 kg/s.
To determine the required mass rate of change (Δm/Δt) of the space probe, we can use the generalized form of Newton's Second Law, which states that the force acting on an object is equal to its mass multiplied by its acceleration.
The force acting on the space probe is given by F = (Δm/Δt) * v, where v is the velocity at which the fuel is ejected.
The upward acceleration of the space probe is given as 2.50 m/[tex]s^2[/tex].
Using the equation F = m * a, where m is the mass of the space probe and a is the upward acceleration, we have:
(Δm/Δt) * v = m * a
Rearranging the equation, we can solve for Δm/Δt:
Δm/Δt = (m * a) / v
Substituting the given values, we have:
Δm/Δt = (150,000 kg * 2.50 m/[tex]s^2[/tex]) / 37,000 m/s
Calculating this expression, we find:
Δm/Δt ≈ 10.1351 kg/s
Therefore, the required mass rate of change (Δm/Δt) of the space probe to achieve an upward acceleration of 2.50 m/[tex]s^2[/tex] is approximately 10.1351 kg/s.
Learn more about Newton's Second Law here:
https://brainly.com/question/32884029
#SPJ11
. Experiment shows that a rubber rod at constant tension extends if the temperature is lowered. Using this, show that the temperature of the rod will increase if it is extended adiabatically.
The work done during the extension process contributes to an increase in the internal energy and the overall temperature of the rod.
When a rubber rod is subjected to constant tension and then extended adiabatically, the work is done on the rod, causing an increase in its internal energy. According to the law of conservation of energy, this increase in internal energy must come from another form of energy. In this case, the work done on the rod is converted into the internal energy of the rubber rod.
The extension of the rubber rod under constant tension is accompanied by a decrease in its entropy. As the rod extends, its molecules are forced to align and rearrange in a more ordered manner, resulting in a decrease in entropy. This decrease in entropy is related to an increase in internal energy, which manifests as an increase in temperature. The energy input from the work done on the rod leads to an increase in the random motion of the molecules, causing an increase in temperature.
Therefore, based on experimental observations and the principles of adiabatic heating, we can conclude that if a rubber rod is extended adiabatically, its temperature will increase.
Learn more about entropy here:
https://brainly.com/question/20166134
#SPJ11
Two parallel plate capacitors exist in space with one having a cross section of a square, and the other of a circle. Let them have ℓ as the side lengths and diameter respectively. Is the following statement true or false? In the limit that the plates are very large (ℓ is big), and the surface charge density is equal, the electric field is the same in either case.
True or False?
FalseExplanation:The capacitance of a parallel plate capacitor is given by C = ε A d C=\frac{\varepsilon A}{d}C=dεA, where ε \varepsilonε is the permittivity of free space, A AA is the area of the plates, and d dd is the distance between the plates.
The capacitance of a capacitor is directly proportional to the area of its plates.To determine the electric field, we must compute the electric potential between the two plates. The electric field can be found using the following equation: E = - ∆ V d E=-\frac{\Delta V}{d}E=−dΔV, where V VV is the electric potential difference between the plates.In the case of the square capacitor, the potential difference between the plates is V = EdV=E\frac{d}{\sqrt{2}}V=Ed, where EEE is the electric field between the plates.
The potential difference in a circular capacitor is the same as in a square capacitor.The electric field in the circular capacitor is stronger because it is more concentrated. Since the charge density is equal in both cases, the electric field between the plates will not be the same. As a result, the statement is false.
Learn more about capacitance of a capacitor here,
https://brainly.com/question/30529897
#SPJ11
Near the surface of the planet. the Earth's magnetic field is about 0.5 x 10-4 T. How much energy is stored in 1 m® of the atmosphere because of this field? O 1.25 nanoJoules/cubic meter O 2.5 nanoJoules/cubic meter О 990 microJoules/cubic meter O 20 Joules/cubic meter
The amount of energy stored in 1 m³ of the atmosphere because of the Earth's magnetic field is 1.25 nanoJoules/cubic meter. Hence, the correct option is a. O 1.25 nanoJoules/cubic meter.
The amount of energy stored in 1 m³ of the atmosphere because of the Earth's magnetic field is 1.25 nanoJoules/cubic meter. Explanation:
Given parameters are:
Near the surface of the planet, Earth's magnetic field is = 0.5 x 10⁻⁴ T.
Volume of air = 1 m³
Formula used:
Energy density = (1/2) μ₀B²
Where, B is the magnetic field strength and μ₀ is the permeability of free space. It is a physical constant which is equal to 4π × 10⁻⁷ T m A⁻¹, expressed in teslas per meter per ampere (T m A⁻¹).
Now, substituting the values in the formula:
Energy density = (1/2) × 4π × 10⁻⁷ × (0.5 × 10⁻⁴)²
Energy density = 1.25 × 10⁻⁹ J/m³
Now, 1 J = 10⁹ nJ
1.25 × 10⁻⁹ J = 1.25 nJ
To learn more about magnetic field refer:-
https://brainly.com/question/19542022
#SPJ11
Explain the production of magnetic fields by an electric current 8. What is your prediction if more winds will be added around the nail (consider the relationship between number of winds and magnetic field strength)? (100 words) 9. Using theory and practice, provide a discussion and summarise your results from both experiments (200 words)
The production of magnetic fields by an electric current involves the interaction between moving charges and results in the formation of magnetic field lines. Increasing the number of windings around a nail is predicted to strengthen the magnetic field.
Theory states that when an electric current flows through a wire, a magnetic field is generated around it. This phenomenon, known as electromagnetism, arises from the interaction between moving charges and the resulting magnetic field lines. The strength of the magnetic field depends on factors such as the current intensity and the distance from the wire. By increasing the number of windings around a nail, the number of loops through which the current flows is multiplied, leading to a stronger magnetic field. This prediction is based on the principle that the magnetic field produced by each loop of wire adds up to contribute to the overall field strength. Experimental observations and measurements can confirm this relationship by comparing the magnetic field strength for different numbers of windings, using instruments like a magnetometer.
Learn more about magnetic here;
https://brainly.com/question/26257705
#SPJ11
Briefly comment on the following statement: "knowledge of the magnetic behaviour of an ideal magnetic gas provides us with information about the spectroscopic state of the magnetic atom or ion". What is meant by magnetic gas? Is the ideal magnetic gas model relevant to solid state physics?
The statement suggests a connection between the magnetic properties of a gas and the spectroscopic state of individual magnetic atoms or ions.
In physics, a gas typically refers to a collection of particles that are far apart and interact weakly. However, the term "magnetic gas" is not commonly used or well-defined. It is unclear what specific properties or behaviors are attributed to a magnetic gas.
When studying the magnetic properties of atoms or ions, spectroscopy is a powerful tool that provides information about the energy levels and transitions of the system. The behavior of individual magnetic atoms or ions in solids is more commonly studied in solid-state physics, which deals with the collective behavior of many atoms or ions interacting with each other.
While the concept of an ideal gas is often used in thermodynamics to simplify calculations, the ideal gas model does not directly apply to magnetic properties or solid-state systems. Solid-state physics requires more complex models, such as band theory and crystal field theory, to describe the magnetic behavior of solids accurately.
Learn more about crystal field theory here:
https://brainly.com/question/29389010
#SPJ11
Oppositely charged parallel plates are separated by 5.27 mm. A potential difference of 600 V exists between the plates.
(a) What is the magnitude of the electric field between the plates?
N/C
(b) What is the magnitude of the force on an electron between the plates?
N
(c) How much work must be done on the electron to move it to the negative plate if it is initially positioned 2.54 mm from the positive plate?
(a) The magnitude of the electric field between the oppositely charged parallel plates is 113,873.27 N/C. To calculate the electric field between the plates, we can use the formula:
[tex]Electric field (E) = Voltage (V) / Distance between plates (d)[/tex]
Substituting the given values:
[tex]E = 600 V / 5.27 mm = 113,873.27 N/C[/tex]
Therefore, the magnitude of the electric field between the plates is approximately 113,873.27 N/C.
(b) The magnitude of the force on an electron between the plates is [tex]1.758 * 10^{-15} N[/tex].
The force on a charged particle in an electric field can be calculated using the formula:
[tex]Force (F) = Charge (q) * Electric field (E)[/tex]
The charge of an electron is 1.6 x 10^-19 C, and the electric field between the plates is 113,873.27 N/C. Substituting these values:
[tex]F = (1.6 * 10^{-19} C) * (113,873.27 N/C) = 1.758 * 10^{-15 }N[/tex]
Therefore, the magnitude of the force on an electron between the plates is approximately [tex]1.758 * 10^{-15} N[/tex].
(c) The work done on the electron to move it to the negative plate, starting from a position 2.54 mm from the positive plate, is [tex]4.47* 10^{-18} J[/tex].
The work done on a charged particle can be calculated using the formula:
[tex]Work (W) = Charge (q) x Voltage (V)[/tex]
The charge of an electron is[tex]1.6* 10^{-19} C[/tex], and the voltage between the plates is 600 V. Substituting these values:
[tex]W = (1.6 * 10^{-19 }C) * (600 V) = 9.6 * 10^{-17} J[/tex]
However, the work is done to move the electron against the electric field, so the work done is negative:
[tex]W = -9.6 * 10^{-17} J[/tex]
Therefore, the work done on the electron to move it to the negative plate, starting from a position 2.54 mm from the positive plate, is approximately[tex]-9.6 * 10^{-17} J[/tex], or equivalently, [tex]4.47* 10^{-18} J[/tex].
Learn more about electric field here:
https://brainly.com/question/11482745
#SPJ11
Required information While testing speakers for a concert, Tomás sets up two speakers to produce sound waves at the same frequency, which is between 100 Hz and 150 Hz. The two speakers vibrate in phase with each other. He notices that when he listens at certain locations, the sound is very soft (a minimum Intensity compared to nearby points). One such point is 26.1 m from one speaker and 373 m from the other (The speed of sound in air is 343 m/s.) What is the maximum frequency of the sound waves coming from the speakers? Hz
Given data: Distance between two speakers is d1 = 26.1m
Distance between the observer and one speaker is d2 = 373m
The speed of sound in air is v = 343m/s
The sound waves are in-phase with each other and the minimum intensity is observed at this point. This point is the position of a node of the sound wave. If we consider the path difference between the two waves to be an integer multiple of the wavelength, we will obtain another node of the wave, where the intensity is minimum.
The distance between these two points will be half the wavelength of the sound wave. Since we have two speakers and one observer, it is clear that the sound waves are propagating in 3-dimensional space.
Therefore, we will use the formula for 3-dimensional distance between two points.
We have, d1+d2 = 399.1m = (n + 1/2) λ
Where n is an integer.
We can consider the case of minimum value of n, which is 0. λ = 2 × 26.1 × 373 / 399.1λ = 47.1m
Frequency of the sound wave, v = fλ f = v / λ f = 343 / 47.1 = 7.28Hz (approx)
Therefore, the maximum frequency of the sound waves coming from the speakers is 7.28Hz (approx).
Answer: 7.28 Hz (approx)
Learn more about soundwaves, here
https://brainly.com/question/16093793
#SPJ11
220V, 50Hz, n=1400rpm, equivalent circuit parameters of one phase induction motor R1=2.9ohm, R2'=3ohm, X1=X2'=3.3ohm, Xm=56ohm When operating at the rated power of the engine;
a) current drawn from the network
b) induced rotating field strength
c) If P friction = 43W, the induced mechanical power
d) calculate efficiency.
220V, 50Hz, n=1400rpm, equivalent circuit parameters of one phase induction motor R1=2.9ohm, R2'=3ohm, X1=X2'=3.3ohm, Xm=56ohm When operating at the rated power of the engine;(a)I= 7.88 amps + j8.85 amps(b)he induced rotating field strength is: 446.8 volts(c)he induced mechanical power is Pmech =1217 watts(d)η =70.4%
a) Current drawn from the network
The current drawn from the network can be calculated using the following equation:
I = V / Z
where V is the applied voltage and Z is the impedance of the motor.
The applied voltage is 220 volts, and the impedance of the motor is:
Z = R1 + jX1 = 2.9 ohms + j3.3 ohms
Therefore, the current drawn from the network is:
I = 220 volts / (2.9 ohms + j3.3 ohms) = 7.88 amps + j8.85 amps
b) Induced rotating field strength
The induced rotating field strength can be calculated using the following equation:
E = I ×Xm
where I is the current flowing through the motor and Xm is the magnetizing reactance of the motor.
The current flowing through the motor is 7.88 amps, and the magnetizing reactance of the motor is:
Xm = 56 ohms
Therefore, the induced rotating field strength is:
E = 7.88 amps ×56 ohms = 446.8 volts
c) If P friction = 43W, the induced mechanical power
The induced mechanical power can be calculated using the following equation:
Pmech = V × I × cos(phi) - Pfric
where V is the applied voltage, I is the current flowing through the motor, phi is the power factor, and Pfric is the frictional power.
The applied voltage is 220 volts, the current flowing through the motor is 7.88 amps, the power factor is 0.8, and the frictional power is 43 watts.
Therefore, the induced mechanical power is:
Pmech = 220 volts × 7.88 amps × 0.8 - 43 watts = 1260 watts - 43 watts = 1217 watts
d) Calculate efficiency
The efficiency of the motor can be calculated using the following equation:
η = Pmech / Pinput
where Pmech is the induced mechanical power and Pinput is the input power.
The input power is the power supplied to the motor by the network, which is 220 volts × 7.88 amps = 1739 watts.
Therefore, the efficiency of the motor is:
η = 1217 watts / 1739 watts = 0.704 = 70.4%
To learn more about power visit: https://brainly.com/question/27861305
#SPJ11
The emf and the internal resistance of a battery are as shown in the figure. When the terminal voltage Vabis equal to - 17.4. what is the current through the battery, including its direction? 8.7 A. from b to a 6.8 A, from a to b 24 A, from b to a 19 A from a to b 16 A. from b to n
The current is flowing from point b to point a, as shown in the figure.The correct option is 8.7 A, from b to a.
A battery of emf 6.5 V and internal resistance 0.5 Ω is connected to a variable resistor R. When the terminal voltage Vab is equal to - 17.4 V, the current through the battery is 8.7 A and it flows from point b to point a. Hence, the correct option is 8.7 A, from b to a.Explanation:
Let the current flowing through the circuit be I.Then, the terminal voltage of the battery is given byVab = Emf - IrHere, Emf is the electromotive force of the battery, I is the current flowing through the circuit and r is the internal resistance of the battery.Vab = 6.5 - I(0.5)Vab = 6.5 - 0.5IOn the other hand, the terminal voltage is given asVab = - 17.4Given, Vab = - 17.4
Therefore,- 17.4 = 6.5 - 0.5II = (6.5 + 17.4)/0.5I = 46.8/0.5I = 93.6 A.The current is flowing from point b to point a, as shown in the figure.Hence, the correct option is 8.7 A, from b to a.
To know more about resistance
https://brainly.com/question/17010736
#SPJ11
Roll a marble from one horizontal surface to another connected by a ramp. Include a slight angle of the path with respect to the ramp. Note that the angle will change as the ball goes to a lower level. Does the angle relationship obey Snell's Law? The main idea is to see if Snell's Law would support the experiment (rolling a marble from a horizontal surface to another via a ramp. Please provide a drawn visual.
When rolling a marble from one horizontal surface to another connected by a ramp, the angle relationship between the path and the ramp does not obey Snell's Law. Snell's Law is specifically applicable to the refraction of light at the interface between two different mediums.
It describes the relationship between the angles of incidence and refraction for light passing through a boundary. In the case of a marble rolling on a ramp, the principle of Snell's Law does not apply as it is not related to the refraction of light.
Snell's Law is a principle that applies to the refraction of light, not to the motion of objects. It states that when light passes from one medium to another, the ratio of the sine of the angle of incidence to the sine of the angle of refraction is constant and depends on the refractive indices of the two media.
In the case of a marble rolling on a ramp, the motion of the marble is governed by principles of classical mechanics, such as gravity, friction, and the shape of the ramp. The angle of the path taken by the marble will depend on the slope of the ramp and the initial conditions of the marble's motion. It does not involve the refraction of light or the principles described by Snell's Law.
Therefore, the angle relationship between the path of the marble and the ramp does not obey Snell's Law since Snell's Law is not applicable to this scenario.
Learn more about classical mechanics here:
https://brainly.com/question/2663861
#SPJ11
Measure the focal distance f, the distance of the object arrow from the mirror d 0
, and the distance of its image from the mirror d 1
. Record your results here f=126.81 ∘
do=0.29 m
di=0.17 m
Question 2-2: Are your results consistent with the mirror equation? Explain. If not, discuss what you think are the reasons for the disagreement. QUESTION 2-3: Based on your observations, is the image created by a concave mirror real or virtual? Explain. QUESTION 2-4: Qualitatively, is the magnification and orientation of the image consistent with the magnification equation? Explain.
The measured values of the focal distance (f), object distance from the mirror (d₀), and image distance from the mirror (d₁) are as follows: f = 126.81°, d₀ = 0.29 m, and d₁ = 0.17 m.
In order to determine whether the results are consistent with the mirror equation, we can use the formula:
1/f = 1/d₀ + 1/d₁
Substituting the measured values, we have:
1/126.81° = 1/0.29 + 1/0.17
Solving this equation, we can determine if the left-hand side is equal to the right-hand side. If they are approximately equal, then the results are consistent with the mirror equation.
Regarding the nature of the image created by the concave mirror, we can analyze the sign of the image distance (d₁). If d₁ is positive, it indicates that the image is formed on the same side as the object and is therefore a real image. On the other hand, if d₁ is negative, it implies that the image is formed on the opposite side of the mirror and is thus a virtual image.
To determine if the magnification and orientation of the image are consistent with the magnification equation, we can use the formula:
m = -d₁/d₀
Here, m represents the magnification. If the magnification value is negative, it means the image is inverted compared to the object. If it is positive, the image is upright. Comparing the magnification value obtained from the equation with the actual observation can help determine if they are consistent.
Learn more about mirror equation:
https://brainly.com/question/32238622
#SPJ11
a. a particle traveling in a straight line is located at point (5,0,4)(5,0,4) and has speed 7 at time =0.t=0. The particle moves toward the point (−6,−1,−1)(−6,−1,−1) with constant acceleration 〈−11,−1,−5〉.〈−11,−1,−5〉. Find position vector ⃗ ()r→(t) at time .
b. A baseball is thrown from the stands 40 ft above the field at an angle of 20∘20∘ up from the horizontal. When and how far away will the ball strike the ground if its initial speed is 26 ft/sec? (Assume ideal projectile motion, that is, that the baseball undergoes constant downward acceleration due to gravity but no other acceleration; assume also that acceleration due to gravity is -32 feet per second-squared.)
The ball will hit the ground after ? sec.
The ball will hit the ground a horizontal distance of ? ft away
The ball will hit the ground after approximately 1.88 seconds and at a horizontal distance of approximately 34.15 ft away.
a. To find the position vector of the particle at time t, we can use the kinematic equation for motion with constant acceleration. The position vector ⃗r(t) is given by ⃗r(t) = ⃗r₀ + ⃗v₀t + 0.5⃗at², where ⃗r₀ is the initial position vector, ⃗v₀ is the initial velocity vector, ⃗a is the acceleration vector, and t is the time.
Plugging in the values, we have ⃗r(t) = (5, 0, 4) + (0, 0, 7)t + 0.5(-11, -1, -5)t², which simplifies to ⃗r(t) = (5 - 11t^2, -t, 4 - 5t^2). This gives the position vector of the particle at any given time t.
b. For the baseball, we can analyze its motion using projectile motion equations. The vertical and horizontal motions are independent of each other, except for the initial velocity. The vertical motion is affected by gravity, with an acceleration of -32 ft/s².
Using the given initial speed of 26 ft/s and the launch angle of 20 degrees, we can decompose the initial velocity into its vertical and horizontal components. The vertical component is 26 * sin(20°) ft/s, and the horizontal component is 26 * cos(20°) ft/s.
To find the time of flight, we can use the equation for vertical motion: y = y₀ + v₀yt + 0.5at². The initial vertical position is 40 ft, the initial vertical velocity is 26 * sin(20°) ft/s, and the vertical acceleration is -32 ft/s². Solving for t, we get t ≈ 1.88 seconds.
To find the horizontal distance, we use the equation x = x₀ + v₀xt, where the initial horizontal position x₀ is 0 ft (assuming the ball is thrown from the stands), the initial horizontal velocity v₀x is 26 * cos(20°) ft/s, and the time of flight t is approximately 1.88 seconds. Solving for x, we find x ≈ 34.15 ft.
Learn more about acceleration here:
https://brainly.com/question/30660316
#SPJ11
A ball is attached to a string and is made to move in circles. Find the work done by centripetal force to move the ball 2.0 m along the circle. The mass of the ball is 0.10 kg, and the radius of the circle is 1.3 m. O 6.2 J O 3.1 J 2.1 J zero 1.0 J A block of mass 1.00 kg slides 1.00 m down an incline of angle 50° with the horizontal. What is the work done by force of gravity (weight of the block)? 7.5J 4.9 J 1.7 J 3.4 J 1 pts 6.3
A ball is attached to a string and is made to move in circles. Therefore, the work done by centripetal force to move the ball 2.0 m along the circle is 10.49 J. Therefore, the work done by force of gravity (weight of the block) is 6.3 J.
The work done by centripetal force to move the ball 2.0 m along the circle can be calculated as follows:
Formula: Work done by centripetal force (W) = (Force x Distance x π) / (Time x 2) Force (F) = mv² / r where m = mass of the ball, v = velocity of the ball, and r = radius of the circle
Distance (d) = circumference of the circle = 2πrTime (t) = time taken to move 2.0 m along the circle
Given, mass of the ball, m = 0.10 kg ,Radius of the circle, r = 1.3 m, Distance moved along the circle, d = 2.0 m
We know that, velocity (v) = (2πr) / t where t is the time taken to move 2.0 m along the circle.
Substituting the value of v in the formula of force (F), we get,F = m(2πr / t)² / r = 4π²mr / t²
Substituting the given values, we get,F = 4 × 3.14² × 0.10 × 1.3 / (t × t) = 1.67 / (t × t)
Work done by centripetal force,W = (Force x Distance x π) / (Time x 2)= (1.67 / (t × t)) × 2 × π × 2.0 / (t × 2) = 2 × 3.14 × 1.67 / (t × t) = 10.49 / (t × t)
For simplicity, assume t = 1 secondW = 10.49 Joules
Therefore, the work done by centripetal force to move the ball 2.0 m along the circle is 10.49 J.
The option which represents this answer is not given. The nearest option is 10.5 J.
Another problem is provided below: Given, mass of the block, m = 1.00 kg Height of the incline, h = 1.00 m
Angle of the incline with the horizontal, θ = 50°The force of gravity (weight of the block) can be calculated as follows: Force (F) = m x g where g is the acceleration due to gravity F = 1.00 × 9.8 = 9.8 N Work done by force of gravity, W = F x d x cos θwhere d is the distance moved along the incline W = 9.8 × 1.00 × cos 50° = 9.8 × 0.643 = 6.3 Joules.
Therefore, the work done by force of gravity (weight of the block) is 6.3 J.
Learn more about centripetal force here:
https://brainly.com/question/14021112
#SPJ11
An iron rod is heated to temperature T. At this temperature, the iron rod glows red, and emits power P through thermal radiation. Suppose the iron rod is heated further to temperature 27. At this new temperature, what is the power emitted through thermal radiation? a) P b) 2P c) 4P d) 8P e) 16P Suppose the root-mean-square speed of molecules in an ideal gas is increased by a factor of 10. In other words, the root-mean-square speed is increased from Vrms to 10 Vrms. What happens to the pressure, P, of the gas? a) Pincreases by a factor of 100. b) P increases by a factor of 10. c) P increases by a factor of √10. d) P remains unchanged. e) None of the above Suppose the constant-pressure molar specific heat capacity of an ideal gas is Cp = 33.256 J/mol K. Based on this information, which of the following best describes the atomic structure of the gas? a) The gas is a monatomic gas. b) The gas is a cold diatomic gas. c) The gas is a hot diatomic gas. d) Molecules of the gas have three or more atoms. e) None of the above
When the temperature of the iron rod is raised from T to 27, the power emitted through thermal radiation would be 16P. The pressure of a gas will increase by a factor of 100 if the root-mean-square speed of molecules in an ideal gas is increased by a factor of 10. The ideal gas with a constant-pressure molar specific heat capacity of Cp = 33.256 J/mol K is a monatomic gas.
An iron rod is heated to temperature T. At this temperature, the iron rod glows red, and emits power P through thermal radiation. Suppose the iron rod is heated further to temperature 27. At this new temperature, what is the power emitted through thermal radiation?
At high temperatures, such as those experienced by the sun, thermal radiation power increases dramatically. Thermal radiation power is directly proportional to the fourth power of the absolute temperature when the heat radiation is from a black body. The formula is as follows:P ∝ T⁴
Since P is directly proportional to the fourth power of the absolute temperature T, when the temperature of the iron rod is raised from T to 27, the power emitted through thermal radiation will rise by a factor of (27/T)⁴. Option e) 16P is the correct answer. Therefore, the power emitted through thermal radiation would be 16P. Suppose the root-mean-square speed of molecules in an ideal gas is increased by a factor of 10. In other words, the root-mean-square speed is increased from Vrms to 10 Vrms.
What happens to the pressure, P, of the gas?The kinetic theory of gases suggests that the pressure (P) of a gas is proportional to the square of the root-mean-square (rms) speed (Vrms) of its molecules.
In the following manner, this is given:P ∝ Vrms²If Vrms is increased by a factor of 10, P will increase by a factor of 10²= 100. Therefore, the correct answer is option a) Pincreases by a factor of 100. Suppose the constant-pressure molar specific heat capacity of an ideal gas is Cp = 33.256 J/mol K. Based on this information, which of the following best describes the atomic structure of the gas?
The ideal gas constant-pressure specific heat capacity can be related to the atomic structure of the gas. Diatomic gases, which are gases composed of molecules that consist of two atoms, have Cp = 7R/2, whereas monatomic gases, which are gases consisting of single atoms, have Cp = 5R/2, where R is the universal gas constant. Because the given Cp for the ideal gas is 33.256 J/mol K, which is less than 37.28 J/mol K, the gas must be monatomic. As a result, the correct answer is option a) The gas is a monatomic gas.
In conclusion, when the temperature of the iron rod is raised from T to 27, the power emitted through thermal radiation would be 16P. The pressure of a gas will increase by a factor of 100 if the root-mean-square speed of molecules in an ideal gas is increased by a factor of 10. The ideal gas with a constant-pressure molar specific heat capacity of Cp = 33.256 J/mol K is a monatomic gas.
Learn more about temperature here,
https://brainly.com/question/15241334
#SPJ11
The position of a particle is r(t) = (2.5t²x + 4y − 4tz) m. a. Determine its velocity and acceleration as a function of time. v(t) = (____ x + ____ ŷ + ____ z) m/s a(t) = (____ x + ____ ŷ + ____ z) m/s².
b. What are its velocity and acceleration at time t = 0? v(t = 0) = ______ m/s a (t=0) = _______ m/s²
The velocity of the particle is given by v(t) = (5tx i - 4z j) m/s. The acceleration of the particle is given by a(t) = (5x i - 4z j) m/s². The velocity of the particle at time t=0 is 0 m/s, and acceleration of the particle at time t=0 is 4k m/s².
The position of the particle is described by the function r(t) = (2.5t²x + 4y − 4tz) in meters.
a) Velocity, v(t) = dr(t)/dt
Velocity represents the speed at which an object's position changes over time. Let's differentiate r(t) with respect to time, we get,
v(t) = dr(t)/dt
= d/dt (2.5t²x + 4y − 4tz)
= 5tx i - 4z j
So, the velocity of the particle is given by v(t) = (5tx i - 4z j) m/s
Acceleration, a(t) = dv(t)/dt
Acceleration indicates how the velocity of an object changes over time. Let's differentiate v(t) with respect to time, we get,
a(t) = dv(t)/dt
= d/dt (5tx i - 4z j)
= 5x i + 0 j - 4k
So, the acceleration of the particle is given by a(t) = (5x i - 4z j) m/s²
b) We need to find the velocity and acceleration of the particle at time t = 0.
v(t = 0) = 5 * 0 * 0 i - 4 * 0 j = 0a (t=0) = 5 * 0 i - 4 * 0 j + 4k = 4k
The velocity of the particle at time t=0 is 0 m/s, and acceleration of the particle at time t=0 is 4k m/s².
Learn more about velocity at: https://brainly.com/question/80295
#SPJ11
How can we prepare a cavity with a photon? (I.e., make sure that exactly one photon exists in the cavity.)
We can prepare a cavity with a photon by applying a short optical pulse to excite an atom and using Rabi oscillation to control the interaction between the atom and a photon in a cavity.
To prepare cavity with a photon, we need to follow some steps. They are:Start with the cavity and prepare it in the ground state.To excite the atom, apply a short optical pulse.A photon will be produced by the atom and will enter the cavity if the atom is in the excited state.The photon will be trapped in the cavity and can be measured.To make sure that exactly one photon exists in the cavity, we can use the process of Rabi oscillation. It involves an atom and a photon in a resonant cavity.
When the photon is absorbed by the atom, the system's state changes to an excited state, and this energy is released in the form of a photon.The Rabi oscillation is a way to control and manipulate the interaction between an atom and a photon in a cavity, and it can be used to prepare a cavity with exactly one photon. By tuning the parameters of the pulse, we can control the probability of a photon being produced by the atom and entering the cavity, allowing us to prepare a cavity with a single photon.Therefore, we can prepare a cavity with a photon by applying a short optical pulse to excite an atom and using Rabi oscillation to control the interaction between the atom and a photon in a cavity.
Learn more about Manipulate here,how does manipulation solve the third-variable problem?
https://brainly.com/question/30775783
#SPJ11
A block of metal of mass 0.340 kg is heated to 154.0°C and dropped in a copper calorimeter of mass 0.250 kg that contains 0.150 kg of water at 30°C. The calorimeter and its contents are Insulated from the environment and have a final temperature of 42.0°C upon reaching thermal equilibrium. Find the specific heat of the metal. Assume the specific heat of water is 4.190 x 10 J/(kg) and the specific heat of copper is 386 J/(kg. K). 3/(kg-K)
The specific heat of the metal can be calculated using the principle of energy conservation and the specific heat capacities of water and copper. The specific heat of the metal is found to be approximately 419 J/(kg·K).
To find the specific heat of the metal, we can apply the principle of energy conservation. The heat lost by the metal when it cools down is equal to the heat gained by the water and the calorimeter.
First, let's calculate the heat lost by the metal. The initial temperature of the metal is 154.0°C, and its final temperature is 42.0°C. The temperature change is ΔT = (42.0°C - 154.0°C) = -112.0°C. We use the negative sign because the temperature change is a decrease.
The heat lost by the metal can be calculated using the formula Q = mcΔT, where Q is the heat transferred, m is the mass of the metal, c is its specific heat, and ΔT is the temperature change. Plugging in the values, we have Q_metal = (0.340 kg)(c)(-112.0°C).
Next, let's calculate the heat gained by the water and the calorimeter. The mass of the water is 0.150 kg, and its temperature change is ΔT = (42.0°C - 30.0°C) = 12.0°C. The heat gained by the water can be calculated using the formula Q_water = (0.150 kg)(4.190 x 10^3 J/(kg·K))(12.0°C).
The mass of the calorimeter is 0.250 kg, and its specific heat is 386 J/(kg·K). The temperature change of the calorimeter is the same as that of the water, ΔT = 12.0°C. The heat gained by the calorimeter can be calculated using the formula Q_calorimeter = (0.250 kg)(386 J/(kg·K))(12.0°C).
Since the system is insulated, the heat lost by the metal is equal to the heat gained by the water and the calorimeter. Therefore, we have the equation Q_metal = Q_water + Q_calorimeter.
By substituting the respective values, we can solve for the specific heat of the metal, c_metal. Rearranging the equation and solving for c_metal, we find c_metal ≈ 419 J/(kg·K).
Therefore, the specific heat of the metal is approximately 419 J/(kg·K).
Learn more about specific heat here ;
https://brainly.com/question/31608647
#SPJ11
The left end of a horizontal spring (with spring constant k = 36 N/m) is anchored to a wall, and a block of mass m = 1/4 kg is attached to the other end. The block is able to slide on a frictionless horizontal surface. If the block is pulled 1 cm to the right of the equilibrium position and released from rest, exactly how many oscillations will the block complete in 1 second? 12/π O TU/6 7/12 6/1
The block will complete 6/π oscillations in one second. The block attached to the horizontal spring undergoes simple harmonic motion.
To determine the number of oscillations completed in one second, we need to find the angular frequency (ω) of the system.
Using Hooke's Law and the given values for the spring constant (k) and displacement (x), we can calculate ω. Then, we divide the total time (1 second) by the period of oscillation (T) to obtain the number of oscillations completed in that time frame.
In simple harmonic motion, the angular frequency (ω) is related to the spring constant (k) and the mass (m) of the block by the equation,
ω = √(k/m).
Plugging in the values, we get ω = √(36 N/m / 1/4 kg) = √(144 N/kg) = 12 rad/s.
The period of oscillation (T) is the time taken to complete one full oscillation and is given by T = 2π/ω.
Substituting the value of ω, we find T = 2π/12 = π/6 seconds.
To determine the number of oscillations completed in one second, we divide the total time (1 second) by the period of oscillation (T).
Thus, the number of oscillations is 1 second / (π/6 seconds) = 6/π.
Therefore, the block will complete 6/π oscillations in one second.
In the answer choices you provided, the closest option is 6/1, which is equivalent to 6. However, the correct answer is 6/π.
To learn more about simple harmonic motion visit:
brainly.com/question/30404816
#SPJ11
Uy = Voy + ayt u=vy + 2a, (v-yo) ỦA B=ỦA TỨC BI |ay| = 9.8 m/s² with downward direction For the following problem, show your work: A helicopter is rising from the ground with a constant speed of 6.00 m/s. When the helicopter is 20.0 m above the ground one of the members of the crew throws a package downward at 1.00 m/s. For the following questions, assume that the +y axis points up. a) What is the initial velocity of the package with respect to the helicopter? Vo P/H = b) What is the initial velocity of the package with respect to an observer on the ground? VO P/G = c) What is the maximum height above the ground reached by the package? Show work. d) At what time does the package reach the ground? Show work. 1 y = yo + Voyt + a₂t² 1 y-Yo=(Voy+U₂)t
The initial velocity of the package with respect to the helicopter is -7.00 m/s. The initial velocity of the package with respect to an observer on the ground is -13.00 m/s. The maximum height above the ground reached by the package is 20.40 m. The package reaches the ground in 2.06 seconds.
a) To find the initial velocity of the package with respect to the helicopter, we can use the relative velocity formula, u = v + 2a. Since the package is thrown downward, the initial velocity of the package with respect to the helicopter, Vo P/H, is equal to the helicopter's downward speed minus the package's downward speed. Therefore, Vo P/H = 6.00 m/s - (-1.00 m/s) = 7.00 m/s in the downward direction.
b) To determine the initial velocity of the package with respect to an observer on the ground, we need to add the velocity of the helicopter to the velocity of the package with respect to the helicopter. Therefore, Vo P/G = 6.00 m/s + 7.00 m/s = 13.00 m/s in the downward direction.
c) The maximum height reached by the package can be found using the equation y = yo + Voyt + 0.5ayt^2. Since the initial velocity of the package is downward, Voy = 0. The initial height, yo, is 20.0 m, and the acceleration, ay, is -9.8 m/s^2. Plugging in these values, we get y = 20.0 m + 0 + 0.5*(-9.8 m/s^2)t^2. To find the maximum height, we need to find the time when the velocity of the package becomes zero. Using the formula for final velocity, v = Voy + ayt, we can solve for t when v = 0. This yields t = 2.06 seconds. Substituting this value back into the equation for height, we find y = 20.0 m + 0 + 0.5(-9.8 m/s^2)*(2.06 s)^2 = 20.40 m.
d) The time it takes for the package to reach the ground can be found by setting y = 0 in the equation for height. 0 = 20.0 m + 0 + 0.5*(-9.8 m/s^2)*t^2. Solving this equation for t, we find t ≈ 2.06 seconds. Therefore, the package reaches the ground after 2.06 seconds.
Learn more about equations of motion:
https://brainly.com/question/29278163
#SPJ11
In one study of hummingbird wingbeats, the tip of a 5.4-cm-long wing moved up and down in simple harmonic motion through a total distance of 2.7 cm at a frequency of 40 Hz. Part A What was the maximum speed of the wing tip?
À Value Request Answer What was the maximum acceleration of the wing tip?
Given the details that the tip of a 5.4-cm-long wing moved up and down in simple harmonic motion through a total distance of 2.7 cm at a frequency of 40 Hz.
We are to find the maximum speed of the wingtip and the maximum acceleration of the wing tip.
Part A:
Maximum speed of the wing tip
The amplitude of the wing tip is given as,
A= 2.7/2 = 1.35 cm
Maximum speed can be given by:
v = 2πAf
Maximum speed of the wing tip is given by:
v = 2π × 40 × 1.35v = 339 cm/s
Therefore, the maximum speed of the wing tip is 339 cm/s.
Part B:
Maximum acceleration of the wing tip
Maximum acceleration can be given by:
a = 4π²Af²
Maximum acceleration of the wing tip is given by:
a = 4π² × 40 × 40 × 1.35a = 27,324 cm/s²
Therefore, the maximum acceleration of the wing tip is 27,324 cm/s².
Answer: Maximum speed of the wing tip = 339 cm/s
Maximum acceleration of the wing tip = 27,324 cm/s².
Learn more about simple harmonic motion here
https://brainly.in/question/959827
#SPJ11
An object that is 5 cm high is placed 70 cm in front of a concave (converging) mirror whose focal length is 20 cm. Determine the characteristics of the image: Type (real or virtual): Location: Magnification: Height:
The image formed by a concave mirror given the object's characteristics is real, inverted, and located 28 cm in front of the mirror.
The magnification is -0.4, implying the image is smaller than the object with a height of -2 cm. The mirror formula, 1/f = 1/v + 1/u, is used to find the image's location (v), where f is the focal length (20 cm) and u is the object's distance (-70 cm). Solving, we get v = -28 cm, meaning the image is 28 cm in front of the mirror. The negative sign indicates the image is real and inverted. To find the magnification (m), we use m = -v/u, getting m = 0.4, again a negative sign indicating an inverted image. Lastly, the height of the image (h') can be found by multiplying the magnification by the object's height (h), giving h' = m*h = -0.4*5 = -2 cm.
Learn more about concave mirrors here:
https://brainly.com/question/33230444
#SPJ11
A car travels at 60.0 mph on a level road. The car has a drag coefficient of 0.33 and a frontal area of 2.2 m². How much power does the car need to maintain its speed? Take the density of air to be 1.29 kg/m³.
The power required by the car to maintain its speed is 29.39 kW.
Speed = 60 mph
Drag coefficient,
CD = 0.33
Frontal area, A = 2.2 m²
Density of air, ρ = 1.29 kg/m³.
We know that power can be defined as force x velocity. Here, force is the resistance offered by the air against the forward motion of the car. Force can be calculated as: F = 1/2 CD ρ Av²where v is the velocity of the car.
Hence, the power can be calculated as: P = Fv = 1/2 CD ρ Av³. Therefore, the power required by the car to maintain its speed can be given as: P = 1/2 CD ρ Av³P = 1/2 x 0.33 x 1.29 x 2.2 x (60/2.237)³P = 29.39 kW.
Learn more about power of a car:
https://brainly.com/question/11569624
#SPJ11
The fastest speed a human has ever run was 11.9 m/s. At what temperature would a nitrogen molecule (MM = 0.0280 kg/mole) travel at that speed? [?]=K. R = 8.31 J/(mol-K)
The temperature at which a nitrogen molecule would travel at the fastest human running speed of 11.9 m/s is approximately 348 Kelvin. So the temperature will be 348K.
To determine the temperature at which a nitrogen molecule would travel at the fastest human running speed, we can use the root mean square (RMS) velocity formula:
v_rms = √((3 * k * T) / m)
Where:
v_rms is the root mean square velocity,
k is the Boltzmann constant (1.38 × 10⁻²³ J/K),
T is the temperature in Kelvin,
m is the molar mass of the nitrogen molecule.
Given that the fastest human running speed is 11.9 m/s and the molar mass of nitrogen is 0.0280 kg/mol, we can rearrange the formula to solve for the temperature:
T = (m * v_rms²) / (3 * k)
Substituting the values, we have:
T = (0.0280 kg/mol * (11.9 m/s)²) / (3 * 8.31 J/(mol-K))
Calculating this expression, we find:
T ≈ 348 K
Therefore, the temperature at which a nitrogen molecule would travel at the same speed as the fastest human running speed is approximately 348 Kelvin.
To know more about Kelvin,
https://brainly.com/question/14132731
#SPJ11
An 80kg man is standing in an elevator. Determine the force of the elevator onto the person if the elevator is coming to stop in going upward at a deceleration of -2.5m/s² 890 N 580 N 980 N 780 N 47
The correct answer is 980N.
What is an elevator?
An elevator is a machine that is used for vertical transportation of people and goods. An elevator typically moves along vertical rails that are anchored to the building's support structure. Elevators are commonly used in buildings that have more than one floor. The elevator is held by an overhead cable or hydraulic system, which supports the car that contains the people or goods. An 80 kg man is standing in an elevator going upward.
The acceleration of the elevator is decelerating, which means it is slowing down. The man is experiencing the force of the elevator and his weight. The force of the elevator on the person can be determined using the formula:
F = m(a+g)
F = 80(9.81-2.5)
F = 628.8 N
The force of the elevator on the person is 628.8 N. Since the elevator is moving upward, the force acting on the person is the sum of his weight and the force of the elevator on him. Thus,
Fnet = F - mg
Fnet = 628.8 - 784
Fnet = -155.2 N
Since the net force is negative, the elevator's force on the person is 980 N, which is the answer.
Learn more about decelerating here
https://brainly.com/question/75351
#SPJ11
A 33.5-g glass thermometer reads 21.6°C before it is placed in 139 mL of water. When the water and thermometer come to equilibrium, the thermometer reads 42.8°C. Ignore the mass of fluid inside the glass thermometer. The value of specific heat for water is 4186 J/kg.Cº, and for glass is 840 J/kg.Cº. What was the original temperature of the water? Express your answer using three significant figures.
The original temperature of the water was approximately 29.7°C. The physical concept of temperature indicates in numerical form how hot or cold something is. A thermometer is used to determine temperature.
To solve this problem, we can use the principle of energy conservation. The energy gained by the water will be equal to the energy lost by the thermometer.
The energy gained by the water can be calculated using the formula:
Q_water = m_water * c_water * ΔT_water
where:
m_water is the mass of the water,
c_water is the specific heat capacity of water, and
ΔT_water is the change in temperature of the water.
The energy lost by the thermometer can be calculated using the formula:
Q_thermometer = m_thermometer * c_thermometer * ΔT_thermometer
where:
m_thermometer is the mass of the thermometer,
c_thermometer is the specific heat capacity of glass, and
ΔT_thermometer is the change in temperature of the thermometer.
Since the thermometer and the water come to equilibrium, the energy gained by the water is equal to the energy lost by the thermometer:
Q_water = Q_thermometer
m_water * c_water * ΔT_water = m_thermometer * c_thermometer * ΔT_thermometer
Rearranging the equation, we can solve for the initial temperature of the water (T_water_initial):
T_water_initial = (m_thermometer * c_thermometer * ΔT_thermometer) / (m_water * c_water) + T_water_final
Given:
m_water = 139 g (converted to kg)
c_water = 4186 J/kg.Cº
ΔT_water = 42.8°C - 21.6°C = 21.2°C
m_thermometer = 33.5 g (converted to kg)
c_thermometer = 840 J/kg.Cº
ΔT_thermometer = 42.8°C - T_water_initial
Substituting these values into the equation, we can solve for T_water_initial:
T_water_initial = (0.0335 kg * 840 J/kg.Cº * (42.8°C - T_water_initial)) / (0.139 kg * 4186 J/kg.Cº) + 21.6°C
Simplifying the equation, we get:
T_water_initial = (0.0335 * 840 * 42.8) / (0.139 * 4186) + 21.6
Calculating the right-hand side of the equation, we find:
T_water_initial ≈ 29.7°C
To know more about temperature
https://brainly.com/question/7510619
#SPJ11
73. A small soap factory in Laguna supplies soap containing 30% water to a local hotel at P373 per 100 kilos FOB. During a stock out, a different batch of soap containing 5% water was offered instead.
The new cost of the soap containing 5% water would be cheaper. However, it is important to note that the new batch of soap may not have the same quality as the original batch containing 30% water. The hotel may also not be satisfied with the quality of the new batch and may choose to switch suppliers.
In the case of a small soap factory in Laguna that supplies soap containing 30% water to a local hotel at P373 per 100 kilos FOB and then experiencing a stock out, the factory may provide a different batch of soap containing 5% water. This will change the cost of the soap. The cost of the soap containing 30% water is calculated using:P373 per 100 kilos = (30% x 100 kilos) water + (70% x 100 kilos) soap= 30 kilos water + 70 kilos soap Therefore, the cost of the soap component is:P373/70 kilos soap = P5.33/kilo soapOn the other hand, if the soap contains 5% water, the cost of the soap will change. The cost of the soap component in this case would be:P373/95 kilos soap = P3.93/kilo soap. Therefore, the new cost of the soap containing 5% water would be cheaper. However, it is important to note that the new batch of soap may not have the same quality as the original batch containing 30% water. The hotel may also not be satisfied with the quality of the new batch and may choose to switch suppliers.
To know more about soap visit:
https://brainly.com/question/27807899
#SPJ11
How would the resolution of a 10cm radio wave change from using
a 1m telescope to a 2000 m array of telescopes?
The resolution of a 10cm radio wave would significantly improve when using a 2000m array of telescopes compared to using a 1m telescope
Radio waves with long wavelengths, ranging from millimeters to hundreds of meters, can be utilized for observing the cosmos. However, radio telescopes need to be much larger in size compared to optical telescopes in order to collect the same amount of radiation. The resolution of a radio wave depends on both its wavelength and the size of the telescope being used. As the wavelength of a radio wave decreases, its resolution improves.
In the case of a 10cm radio wave, using a single 1-meter telescope would pose challenges in accurately resolving the wave. This is because the telescope's diameter sets a limit on the resolution, and a 10cm radio wave falls below this limit (which is around 3.3cm). Consequently, the resolution achieved would not be precise.
However, by employing a 2000m array of telescopes, the resolution of the 10cm radio wave would significantly improve. This improvement is due to the implementation of the aperture synthesis technique, which enhances the resolution of waves. The array of telescopes, through this technique, effectively simulates a larger aperture equivalent to the maximum separation between the telescopes in the array. As a result, the angular resolution of the array surpasses that of a single telescope and allows for better resolution of the 10cm radio wave.
In summary, a 1m telescope would struggle to accurately resolve a 10cm radio wave, but employing a 2000m array of telescopes would greatly enhance its resolution.
Learn more about radio telescopes:
https://brainly.com/question/33452444
#SPJ11
A skier leaves a platform horizontally, as shown in the figure. How far along the 30 degree slope will it hit the ground? The skier's exit speed is 50 m/s.
A skier leaves a platform horizontally, the skier will hit the ground approximately 221.13 meters along the 30-degree slope.
To determine how far along the 30-degree slope the skier will hit the ground, we can analyze the projectile motion of the skier after leaving the platform.
Given:
Exit speed (initial velocity), v = 50 m/s
Angle of the slope, θ = 30 degrees
First, we can resolve the initial velocity into its horizontal and vertical components. The horizontal component remains unchanged throughout the motion, while the vertical component is affected by gravity.
Horizontal component: v_x = v * cos(θ)
Vertical component: v_y = v * sin(θ)
Now, we can focus on the vertical motion of the skier. The time of flight can be determined using the vertical component of the initial velocity and the acceleration due to gravity.
Time of flight: t = (2 * v_y) / g
Next, we can calculate the horizontal distance traveled by the skier using the horizontal component of the initial velocity and the time of flight.
Horizontal distance: d = v_x * t
Substituting the values, we get:
v_x = 50 m/s * cos(30 degrees) ≈ 43.30 m/s
v_y = 50 m/s * sin(30 degrees) ≈ 25.00 m/s
t = (2 * 25.00 m/s) / 9.8 m/s^2 ≈ 5.10 s
d = 43.30 m/s * 5.10 s ≈ 221.13 meters
Therefore, the skier will hit the ground approximately 221.13 meters along the 30-degree slope.
Learn more about initial velocity here:
https://brainly.com/question/28395671
#SPJ11