¿Qué cantidad de calor se desprende cuando 125 g de vapor de agua a 140 ºC se enfrían y congelan produciendo 125 g de hielo a -10 ºC?

Answer:

6.76875 • 10 ^-10 F

Explanation:

You just follow the formula:

C = εA/d

ε = 8.85 • 10^-12

A = 3.61 • 10^-4

D = 4.72 • 10 ^-6

So:

C = (8.85 • 10^-12)(3.61 • 10^-4)/4.72 • 10 ^-6 = 6.76875 • 10 ^-10 F

Good Luck!  :)

When the outer wall moves at a speed of 3.0 m/s, and an 83-kg person feels a 545-N force pressing against his back then the radius of a chamber is 8.5 meters.

The radius of the chamber can be calculated using the equation

F = mv²/r, where F is the force felt by the person, m is the mass of the person, v is the velocity of the chamber and r is the radius of the chamber. In this case, F is 545 N, m is 83 kg, and v is 3.0 m/s.

Plugging in these values, we get

r= mv²/F

r= 83×3²/545

r = 8.5 m.

Therefore, the radius of the chamber is 8.5 m.

Learn more about force:

https://brainly.com/question/25239010

#SPJ4

In pan 1, when you spray the sand with water, the water will be absorbed by the sand and the sand will become more compact and dense. This is because water molecules will fill the spaces between sand particles and increase the weight of the sand.

In pan 2, when you set ice cubes on the sand, the ice cubes will begin to melt as they come into contact with the warmer sand. As the ice melts, the surrounding sand will become wet. The meltwater will also lower the temperature of the sand around the ice cubes.

The ice cubes will continue to melt until they are fully melted, and the water will be absorbed by the sand. The wet sand will be cooler than the dry sand. This process will cause a change in the temperature and moisture content of sand which can be observed and studied.

Read more about heat transfer :

https://brainly.com/question/16055406

#SPJ4

Answer:

B would be the correct answer

The force exerted on the top of the bottle is given by the impulse-momentum theorem, which states that the impulse (change in momentum) of an object is equal to the force applied to the object multiplied by the time over which the force is applied.

F = (m * vi) / t = (0.480 kg * 5.00 m/s) / 1.20×10-4 s = 4.00x104 N

The force exerted on the bottom of the bottle is equal to the pressure (P) multiplied by the area (A) of the bottom of the bottle.

A = (Pi/4) * (Dbot^2) = (Pi/4) * (6.50 cm)^2 = 90.79 cm^2

F = P * A = 70.0 MPa * 90.79 cm^2 = 6.36x10^5 N

In physics, force is calculated using the formula: force = mass x acceleration (F = ma). The unit of force is typically the Newton (N). To calculate force, you need to know the mass of the object and the acceleration it is experiencing. Once you have that information, you can substitute it into the formula and solve for force.

Learn more about force in brainly.com/question/29044739

#SPJ1

Answer:

So, some examples may include the presence of four or five different species of tree in a woodland forest, or perhaps 100 different species of fish, crustaceans and coral in a certain reef.

l will post the option later

pls mark me brainlest

option d

The work done during this period will be 1875 J. It will be positive if the body is displaced in the same direction of the force.

Work done can be defined as the product of applied force and the distance through which the body is displaced where the force is applied.

The value of work can be zero, positive and negative. It depends on the direction of the body displaced.

Data given in the question is;

Let F be the average force applied by the worker

D is the displacement = 15 m

The average force is ;

[tex]F_{avg=\frac{F1+F2}{2}[/tex]

[tex]F_{avg=\frac{210+40}{2}\\[/tex]

[tex]F_{avg=125 J[/tex]

The work done by the worker will be:

W=Fd

W=125x15

W=1875 J

Hence the work done during this period will be 1875 J.

To learn more about the work done:

brainly.com/question/3902440

#SPJ4

The final velocity of the red-blue carts system is 5 cm/s.

The final speed of the two carts, that is the red cart and the blue cart system after the collision is calculated by applying the principle of conservation of linear momentum.

Pi = Pf

m₁u₁ + m₂u₂ = v ( m₁ + m₂ )

where;

m₁u₁ + 0 = v ( m₁ + m₂ )

m₁u₁ = v ( m₁ + m₂ )

v = ( m₁u₁ ) / ( m₁ + m₂ )

The final velocity of the red-blue carts system is calculated as;

v = ( 50 kg cm/s ) / ( 5 kg + 5kg )

v = 5 cm/s

Learn more about linear momentum here: https://brainly.com/question/7538238

#SPJ1

The complete question is below:

A red cart is moving rightward with a momentum of 50 kg cm/s when it collides with a blue cart of equal mass that is initially at rest. The two carts stick together and move to the right with the same speed after the collision. What is the final velocity of the two carts system after the collision if the mass of the blue cart is 5 kg.

The force of gravity that Saturn (mass = 5. 7 x 1026 kg) exerts on a woman on Earth (mass = 61 kg) when Saturn is closest to Earth = 1. 2 x 10° km. ​

Formula used in step two. F = G m 1 m 2 r 2. Step 3: Determine the gravitational force.

Calculating the gravitational force is step three. F = 6.7 10 11 by changing the values in the formula above. 2 × 10 30 × 6 × 10 24 1 .5 × 10 11 2 F = 3 .

The formula for the gravitational constant of the universe is G = 6.674 x 10 - 11 m3/kg s2. Thus, this is the gravitational pull of the sun on the planet.

F = Gm1m2R2, where G is the gravitational constant of the universe. The gravitational force between two bodies of equal mass that are kept at an equal distance from one another constitutes the universal gravitational constant.

To learn more about gravity visit:

brainly.com/question/14874038

#SPJ4

Inducing magnetic properties on a substance means you are aligning the electrons to spin in the same direction, 2nd option.

The magnetic intensity is the magnetic field produced solely by the electric current flowing in a solenoid. The magnetic property of a material is induced by an external magnetic field. When a material is exposed to an external magnetic field, it becomes magnetized.

A strong magnetic field is produced when the majority of electrons in an atom spin in the same direction. The magnetic field's direction is determined by the direction of electron spin.

Learn more on magnetic induction here: https://brainly.com/question/26366866

#SPJ1

Answer:

Energy transformation

Explanation:

Energy transformation means the changing of  energy from one type to another.

The net force acting on the box, and the frictional force acting backward is 25 N

Here,

mass ,m = 12 Kg

F1 = 49 N

a = 2 m/s^2

Using the second law of motion

net force on the particle = m * a

net force on the particle = 12 * 2

the net force on the particle = 24 N

let the frictional force is f

F1 - f = Fnet

49 - f = 24

f = 25 N

The vector sum of all forces acting on an object is known as the net force. As a result of the fact that a force is a vector and that two forces with identical magnitudes and opposing directions cancel each other out, the net force is the sum of all the forces, or put another way, the net force is the sum of all the forces.

to know more about net force here:

brainly.com/question/29261584

#SPJ4

Answer:

(a) 0.500 s displacement 70.0 m - 7.2 m velocity 7.2 m/s

(b) 1.00 s displacement 70.0 m - 28.8 m velocity -13.6 m/s

(c) 1.50 s displacement 70.0 m - 57.6 m velocity -20.4 m/s

(d) 2.00 s displacement 70.0 m - 92.8 m velocity -24.0 m/s

(e) 2.50 s displacement 70.0 m -134.4 m velocity -25.2 m/s

Answer: Natural selection, Genetic drift , Mutations and Gene flow

Explanation:  

Coal is extracted from mountain top by removal of top soil and the use of explosives.

A coal is definitely as the solid substance that is made up of mainly carbon and other constituent elements such as hydrogen, sulfur, oxygen, and nitrogen.

The uses of coal include the following:

To extract coal from the mountain top the following is carried out:

The top soil of the area involved us being removed and

Explosives are then used to expose the underlying coal seams.

Learn more about carbon here:

https://brainly.com/question/20994647

#SPJ1

Approximately 27% of everything in the universe is dark matter, with dark energy making up 68%. This means that all the visible matter we can see, including galaxies, stars and planets, only represents 5% of everything that exists.

The matter of the universe is a complex and ongoing question that scientists are still working to answer. Generally, it is believed that the universe is composed of dark matter, dark energy, and ordinary matter.

Dark energy is thought to be the energy that is causing the universe to expand, while dark matter is an unseen form of matter that is believed to make up about 27% of the universe. Ordinary matter is the form of matter that makes up:

Learn more about the matter of the universe:

https://brainly.com/question/4078206

#SPJ4

(A) The current in the long straight wire produces a magnetic field that is perpendicular to its direction of flow.

What is Counter clockwise ?

Counter clockwise is a direction opposite to the usual clockwise direction. It is often used to describe the direction of rotation or movement, such as the turning of a wheel, the orbits of planets, or the hands of a clock. Counterclockwise motion can also be referred to as "widdershins" or "anticlockwise."

This magnetic field interacts with the loops of wire, inducing a current in them. The direction of the current in loop A is clockwise due to the right hand rule.
(B) No current is induced. Since the flux through loop B is not changing, no induced current is created.
(C) No current is induced. Since loop C is not moving, the changing magnetic field will not induce any current in it.

To learn about Counter clockwise

https://brainly.com/question/28354740

#SPJ4

Complete Questions:
(a) What is the direction of the induced current, if any, in loop A?

A) clockwise

B) counterclockwise

C) No current is induced.

(b) What is the direction of the induced current, if any, in loop B?

A clockwise

B counterclockwise

C No current is induced.

(c) What is the direction of the induced current, if any, in loop C?

A clockwise

B counterclockwise

C No current is induced.

Explanation:

Bonjour

it is hi or hello you can also say the name after

Example:Bonjour(say the name of the person you want to greet)

Answer:

Bonjour

Explanation:

Its just bonjour, you could always expand and say more then just Hi though.

Answer:

A force acting on an object causes the object to change its shape or size

Explanation:

the amplitude of the resultant is the amplitude of the two original waves times 1.85.

The waves add together as a result, and the amplitude at any place is equal to the sum of the amplitudes of the individual waves at that point.

The frequency of the wave produced by the superposition of two waves with comparable frequencies is equal to the average of the two. This wave's amplitude changes or beats at a frequency known as the beat frequency. By mathematically combining two waves, we can find the beat frequency.

To know more about the resultant wave visit:

brainly.com/question/3893031

#SPJ4

With the equation: it is possible to determine t for each of the four ramp segments. t 1 = t 2 - t 1, and t 2 = t 4 - t 3 Likewise, x is the distance between the designated spots for times 3 and 4, respectively.

Although the gravitational force is same when you roll the ball down a ramp, it is no longer in free fall. Now, it has a vector structure. Knowing the downward force and the ramp's incline makes the problem appear to be Pythagorean. Keep in mind that the ball will go at the same speed at the bottom of the ramp as it would have. A ball begins rolling down a ramp with constant acceleration at time zero (t=0), initially at rest. It moves 1 foot between t=0 and t=1 seconds, you see. How much movement occurs between t = 1 second and a.

To learn more about ramp's please click on below link

https://brainly.com/question/13492520

#SPJ4

Answer:

its speed will be less than V

Explanation:

When the ball falls a distance d, its final kinetic energy plus rotational kinetic energy of the drum equals its initial potential energy.

K = U

With its speed V at the end of d, we have

1/2mV² + 1/2Iω² = mgd where I = rotational inertia of drum and balls, ω = angular speed of drum and balls and m = mass of box

1/2mV² + 1/2Iω² = mgd

1/2mV² = mgd - 1/2Iω²

V² = [2(mgd - 1/2Iω²)/m]

V = √[2(mgd - 1/2Iω²)/m]

When the four balls are moved inward closer to the drum, their rotational inertia increases and also its angular speed which thus causes an increase in rotational kinetic energy. But, since the box still falls the same distance of d, its final kinetic energy plus rotational kinetic energy of the drum plus balls still equals its initial potential energy

K = U

I' = new rotational inertia of drum and balls, ω' = new angular speed of drum and balls

With its new speed is now V' at the end of d,

1/2mV'² + 1/2I'ω'² = mgd

1/2mV'² = mgd - 1/2I'ω'²

V² = [2(mgd - 1/2I'ω'²)/m]

V' = √[2(mgd - 1/2I'ω'²)/m]

Since I' and ω' increase, the rotational kinetic energy of the drum and balls (1/2I'ω'²) increases. Thus, the difference (mgd - 1/2I'ω'²) < (mgd - 1/2Iω²) which implies that the kinetic energy of the box decreases. Hence, since its kinetic energy decreases, its speed V' also decreases.

So,  V' < V

So, its speed will be less than V.

The required temperature of the system which has a certain entropy change and receives heat energy is 273.36 °C.

Given that,

The change in entropy of the system = 675 J/K

Heat energy = 243 J

Temperature of the system = ?

The temperature of the system is calculated below.

ΔS = ΔH/T

where,

ΔH is the heat energy

ΔS is the change in entropy of the system

T = ΔH/ΔS = 243/675 = 0.36 K

By converting temperature in kelvin to temperature in degrees centigrade, we get,

T = 273 + 0.36 = 273.36 °C

Thus, temperature of the system which has a certain entropy change and receives heat energy is 273.36 °C.

To know more about temperature:

https://brainly.com/question/20940838

#SPJ4

Answer: N 0.072

Explanation:

First thing i did was figure out what the negative charge was originaly

The charge and the polarity of the 2nd object is 0.072 N.

Contact forces are the kinds of forces that develop when two objects interact and appear to be in physical contact with one another.

Frictional forces, tensional forces, normal forces, air resistance forces, and applied forces are a few examples of contact forces. Lesson 2 and subsequent lessons will cover these particular forces in greater depth.

Action-at-a-distance forces are those that happen even when the two interacting objects are not physically touching each other but are nevertheless able to push or pull against each other despite their physical separation.

Therefore, The charge and the polarity of the 2nd object is 0.072N.

To learn more about Force, refer to the link:

https://brainly.com/question/13191643

#SPJ2

Question: A physics student has a battery and an assortment of resistors. If she uses all of the resistors, how should she arrange them in a circuit to obtain the maximum current flow through the battery and the circuit?

Ans: she should arrange them in parallel

We have that It has to be in series in order too obtain the smallest current drop across the circuit.

Option B

Generally, voltage drops in a series circuit just as current drops across a parallel circuit

Therefore, we have that three batteries arranged in series, It has to be in series in order too obtain the smallest current drop across the circuit.

Series

Option B

For more information on Voltage visit

https://brainly.com/question/14883923

[tex] \large \sf{Answer :- }[/tex]

[tex]\pink:\implies[/tex]In a parallel circuit, the voltage across each of the components is the same, and the total current is the sum of the currents flowing through each component.

[tex]\pink:\implies[/tex]In a series circuit, every device must function for the circuit to be complete. If one bulb burns out in a series circuit, the entire circuit is broken.

:⟹ In a parallel circuit, the voltage across each of the components is the same, and the total current is the sum of the currents flowing through each component.

\pink:\implies:⟹ In a series circuit, every device must function for the circuit to be complete. If one bulb burns out in a series circuit, the entire circuit is broken

Answer:

B.movement of continents

Answer:

False

Explanation:

The centripetal force is the force that points towards the center and is responsible for keeping an object in a curved path. This force is provided by the tension in the string, not the mass of the object.

Answer:

i think the answer is a

Explanation:

hope i am right