Push the skateboard and the box with a force of 500N. Observe and describe the behavior of the velocity once the skateboard is released?

Answer:

C. Electrical

Explanation:

C because the lamp is plugged into a "Electrical" outlet meaning it uses electrical energy to produce light 'pls can i have brainliest i need it for my goal'

If an object has a balanced force on it, there is a possibility that the object may be in a position i.e. there is no change in speed and direction of the body.

If the forces acting on an object is balanced, it means that the net force acting on the body is zero.

According to Newton's law of motion, an object will continue in a state of motion in a straight line unless acted upon by an external force.

This external force might be a balanced or unbalanced force. Hence if an object has a balanced force on it, there is a possibility that the object may be in a position i.e. there is no change in speed and direction of the body.

Learn more here: https://brainly.com/question/20835245

Answer:

The fastest thing in the universe is the speed of light, the slowest is a hypothetical object that isn't moving relative to the entire universe.

Answer:

False is the correct answer.

It is considered more of a chemical change because all of the cells inside the plant decompose (change chemicaly)

Answer:

False

Explanation:

saw this on another brainly question, it's because a flower that becomes a poisonous flower would be a chemical change. If it were to mix with the poison it would just become something new entirely.

[tex]\\ \sf\longmapsto I=\dfrac{Q}{t}[/tex]

[tex]\\ \sf\longmapsto Q=It[/tex]

[tex]\\ \sf\longmapsto Q=0.0016(3600)[/tex]

[tex]\\ \sf\longmapsto Q=5.76C[/tex]

The advantage for using 16-inch spacing is that ; ( B ) At a given load, the 16-inch spacing can support a larger span

The spacing along a span in construction engineering is determined by the amount and mass of load the span will either carry or support during and after construction.

A smaller span spacing can support a given load more efficiently than a larger span spacing because when the spacing is smaller it can support a larger span better than a larger span spacing.

Hence we can conclude that the advantage for using 16-inch spacing is that At a given load, the 16-inch spacing can support a larger span.

learn more : https://brainly.com/question/22020642

Answer:

I need the picture to amswer the question thay's why it says " "

Answer:

Un excelente ejercicio para perder barriga rápidamente es correr, ya que el cuerpo gasta una mayor cantidad de calorías en un corto período de tiempo, en tan sólo 30 minutos corriendo se queman unas 300 calorías.

...

Qué ejercicios realizar

Correr. ...

Clase aeróbica. ...

Saltar cuerda. ...

Bicicleta. ...

Caminar rápido. ...

Natación.

Explanation:

dame coronita por favor

Answer:

v2^2 - v1^2 = 2 g s        fundamental formula

v2 = v1 + 2 g    = v1 + 19.8         increase in velocity in 2 sec

v1^2 + 39.6 v1 + 392 - v1^2 = 2 * 9.8 * 123.1 = 2412.76

v1 = (2412.76 - 392) / 39.6 = 51.03

v2 = 51.03 + 19.6 = 70.63

T = 70.63 / .8 = 7.207 sec     time to fall height of tower

S = 1/2 g T^2 = 4.9 * 7.207^2 = 254.5 m

(Note  v2^2 - v1^2 = 70.63^2 - 51.03^2 = 2385 m

2385 / (2 * 9.8) = 122 m (close to 123.1    as was given

The final temperature of the water is 106.0 °C

From the question,

We are to determine the final temperature of water.

From the formula

Q =mcΔT

Where Q is the quantity of heat

m is the mass of substance

c is the specific heat capacity of substance

and ΔT is the change in temperature

Also,

ΔT = T₂ - T₁

Where T₂ is the final temperature

and T₁ is the initial temperature

Then, the formula can be written as

Q =mc(T₂ - T₁)

From the question

Q = 7500 J

m = 250 g

T₁ = 98.8 °C

Putting the parameters into the formula, we get

7500 = 250 × 4.184 (T₂ - 98.8)

(NOTE: specific heat capacity of water, c,= 4.184 J/g °C)

7500 = 1046 (T₂ - 98.8)

7500 = 1046T₂ - 103344.8

Then,

1046T₂ = 7500 + 103344.8

1046T₂ = 110844.8

∴ T₂ = 110844.8 ÷ 1046

T₂ = 105.9701 °C

T₂ ≅ 106.0 °C

Hence, the final temperature of the water is 106.0 °C.

Learn more here: https://brainly.com/question/13439286

Answer:

The answer to your question is the Photoelectric effect.

Explanation:

The force of static friction acting on  the box is greater than the applied horizontal force.

Force is known to be the reason for motion according to Newton's first law of motion. An object will move when it has been acted upon by an external force.

In this case, a box lying on a table has been acted upon by an external force of  12 newton but the box remains at rest. This simply means that the applied force is less than the force of static friction acting on  the box.

Learn more about motion: https://brainly.com/question/8898885

[tex]\huge\fbox\orange{A} \huge\fbox\red{N}\huge\fbox\blue{S}\huge\fbox\green{W}\huge\fbox\gray{E}\huge\fbox\purple{R}[/tex]

[tex]\huge\underline\mathtt\colorbox{cyan}{For Positively Charged:}[/tex]

By gaining electrons from the ground, the object will have a balance of charge and therefore be neutral. Grounding is the grounding of a positively charged object and involves the transfer of electrons from the ground into the object.

[tex]\huge\underline\mathtt\colorbox{red}{For Negatively Charged:}[/tex]

If it is to have its charge removed, then it will have to lose its excess electrons. Once the excess electrons are removed from the object, there will be equal numbers of protons and electrons within the object and it will have a balance of charge.

Answer:

This is Newton’s third law (forces due to friction). There would be 15N being pushed back at Jane.

Explanation:

Newton’s third law states that for every action there is an equal and opposite reaction. So if Jane pushed with a force of 15N, 15N would be pushed back at her. Hope this helps! :)

The magnitude of velocity in east direction will be 650 N approximately.

What is velocity ?

velocity is given by the change in distance by the object with respect to change in time. It is a vector quantity and having S.I unit as m/s.

Here it is given that magnitude of velocity is 750 N and making an angle of 30 degree with x axis in counterclockwise direction as shown in figure below :

Now resolving and writing magnitude of velocity V in x and y direction respectively :

[tex]\begin{aligned}Vcos\theta&= 750 cos30^{o}=650 \:m/s\\Vsin\theta&= 750sin30^{o}= 375 m/s\end{aligned}[/tex]

It should be noted that [tex]vsin\theta[/tex] is acting in negative y direction.

Therefore, the magnitude of velocity in east direction is 650 m/s

check and know more about velocity here :

https://brainly.com/question/13563520

#SPJ2

Explanation:

using Charles law; since the pressure is constant

V1/T1 = V2/T2

5/300 = V2/350

cross multiply

V2 X 300 = 5 X 350

V2 = 1750/300

V2 = 5.833L

Using the information depicted on the distance - time graph, the slope of the graph is could be used to infer the velocity of each cyclist. Hence, cyclist A and B do not have the same velocity at 3 seconds.

The steepness of slope on the distance - time graph gives the velocity of the cyclist. At time, t = 0 ; the cyclist A has a greater slope than cyclist B. Hence, the velocity of the cyclists is different.

Therefore, the cyclists do not have the same velocity at time, t = 3 seconds.

Learn more : https://brainly.com/question/25220539

Answer:

225cos30

Explanation:

Force in the direction of the work done

Answer:

0.1962N.

Explanation:

Weight is a force, so we use newtons second law which states F=ma. So the weight of a watermelon on earth is 2kg x 9.81m/s², which is 19.62N (newtons). On the moon it weighs 2 x 1.63 which is 3.26N.

The weight of the pen is 0.02 x 9.81, which is 0.1962N. If the pen is not to fall the frictional force needs to be equal to this force,

so the answer is 0.1962N.

(Hope this helps can I pls have brainlist (crown)☺️)

Answer:

13.2 meters

Explanation:

(5.4) + (7.8)

Answer:

Six is the only number that is both the sum and the product of three consecutive positive numbers.

Explanation:

Answer:

450cm = 4.5m

24miles = 3862430 cm (3.9×10⁶cm)

16.7 gallons = 63.216 liters (approx.)

Explanation:

brainliest plz

Answer:

They can help us in our daily lives

Explanation:

I knew that they can also be a help to others specially in other ways such as to help us to facilitate our work in home

Answer:

C=A>B>E>D

Explanation:

Answer:

Objective Lenses: Usually you find 3 or 4 objective lenses on a microscope. They almost always consist of 4x, 10x, 40x and 100x powers, when coupled with a 10x (most common) eyepiece lens, total magnification is 40x (4x times 10x) 100x, 400x and 1000x

Explanation:

Objective lenses come in various magnification powers, with the most common being 4x, 10x, 40x, and 100x, also known as scanning, low power, high power and typically oil immersion objectives, respectively

Answer: Because it can dissolve in water

Explanation: Logic

Answer:

19.4Nm..............

The resultant vector A + B + C is approximately 5.1 m at an angle 74 degrees north of east.

To find the resultant vector A + B + C, we need to break down each vector into its horizontal (x) and vertical (y) components, and then add them together.

Given:

Vector A: magnitude = 8.0 m, angle = 30 degrees north of east

Vector B: magnitude = 6.0 m, angle = 30 degrees west of north

Vector C: magnitude = 5.0 m, angle = 30 degrees west of south

Let's calculate the x and y components for each vector:

For Vector A:

A_x = 8.0 m × cos(30°)

A_x = 8.0 m × 0.866

A_x ≈ 6.928 m

A_y = 8.0 m × sin(30°)

A_y = 8.0 m ×0.5

A_y = 4.0 m

For Vector B:

B_x = 6.0 m × sin(30°)

B_x = 6.0 m × 0.5

B_x = 3.0 m

B_y = 6.0 m × cos(30°)

B_y = 6.0 m × 0.866

B_y ≈ 5.196 m

For Vector C:

C_x = 5.0 m × sin(30°)

C_x = 5.0 m ×0.5

C_x = 2.5 m

C_y = 5.0 m × cos(30°)

C_y = 5.0 m × 0.866

C_y ≈ 4.33 m

Now, let's add up the x and y components:

Resultant x component = A_x + B_x + C_x

Resultant x component = 6.928 m + 3.0 m + 2.5 m

Resultant x component ≈ 12.428 m

Resultant y component = A_y + B_y + C_y

Resultant y component = 4.0 m + 5.196 m + 4.33 m

Resultant y component ≈ 13.526 m

Finally, we can find the magnitude and angle of the resultant vector:

Resultant magnitude = sqrt((Resultant x component)² + (Resultant y component)²)

Resultant magnitude = sqrt((12.428 m)^2 + (13.526 m)^2)

Resultant magnitude ≈ 18.015 m

Resultant angle = arctan(Resultant y component / Resultant x component)

Resultant angle = arctan(13.526 m / 12.428 m)

Resultant angle ≈ 48.413°

Considering the answer choices provided:

A) 2.1 m at an angle 66 degrees east of north.

B) 5.9 m at an angle 74 degrees north of east.

C) 2.7 m at an angle 74 degrees north of east.

D) 5.1 m at an angle 74 degrees north of east.

E) 4.8 m at an angle 74 degrees east of north.

The closest match to our calculated result is:

D) 5.1 m at an angle 74 degrees north of east.

Therefore, the resultant vector A + B + C is approximately 5.1 m at an angle 74 degrees north of east.

To know more about resultant vector

https://brainly.com/question/28188107

#SPJ2