Answer:
C. Influenced by the Sun's electromagnetic field
Explanation:
"Sunspots occur in pairs because each is one side of a loop of the Sun's magnetic field that reaches the Sun's surface. Solar prominences are the plasma loops that connect two sunspots."
Does time stop in a black hole
Answer:
In standard GR, nothing exists at the center of a black hole. The center of a black hole is a singularity, and because GR fails at that point it is simply removed from the manifold. That means that the singularity is not part of spacetime.
To answer your question more realistically, we believe that GR is an approximate theory that fails well before you reach the center. Unfortunately, we have no good alternative theory with which to answer the question in the region where GR fails. We simply don’t have any data from that regime and it is very hard to formulate a good theory without data. So there very well could be time at the center, but we simply don’t have a good way to even guess.
Answer:
Black hole is a region of space having a gravitational field so intense that no matter or radiation can escape
Actually time can't be stop.
although black hole slower a time
Explanation:
Time never cannot be stop totally.
Electromagnetic waves can carry more data at higher frequencies. Why would a scientist opt to transmit data at a lower frequency instead?
What are the limitations of sending information using electromagnetic waves?
What are the differences between analog and digital signals?
What are the advantages of using digital signals over analog signals?
Using reliable internet sources, identify three ways we use analog and digital signals in our everyday lives.
Describe how radio telescopes are used to explore space.
How are radio waves used on Earth?
Why do radio telescopes convert radio waves (analog signals) to electrical (digital) signals for analysis? (Hint: What did the article say about the advantages of digital signals?)
sinat
Accelerationa
2 2.84
7 34
TABLE
in Elination
t2 t3 T2 2
1=0.04
2.29 1.25 1.28 1.271.61
2 460 = 0.00 4.59 1.16 1.081.12 1-25
3 so = 0.12 6.89 0.88
097 0.53
4. = 0.16 9.210.8
9.21 0.850.796. 82/0.67
(So
0.72 0.77 0.75 l 0-56/
0.28
49. al
27. 49
13 11%.
41. 2L
= 0.2 11.54
Answer:
so you have a question
Explanation:
either way,you have a nice day
An object is placed 250 cm in front of a concave circular mirror, and the image of the object also appears at 250 cm in front of the mirror. What is the radius of curvature of the mirror?
500 cm
125 cm
25.0 cm
250 cm
Answer:
Radius of curvature of the mirror = 250 cm
Explanation:
Given:
Object distance from mirror = 250 cm (u=-250)
Object distance appears in mirror = 250 cm (v=-250)
Find:
Radius of curvature of the mirror
Computation:
Using mirror formula
1/f = 1/v + 1/u
1/f = 1/(-250) + 1/(-250)
f = (-250/2)
f = -125 cm or 125 cm
Radius of curvature of the mirror = 2(f)
Radius of curvature of the mirror = 2(125)
Radius of curvature of the mirror = 250 cm
How does the observed spectrum above compare to the thermal radiation curves
you saw in the last section? What are the similarities and differences?
There is no observed spectrum above, and I didn't see any curves in the last section. So I guess they're similar in that respect.
Otherwise, your question is quite intriguing.
A water trough is 10 m long and has a cross-section in the shape of an isosceles trapezoid that is 40 cm wide at the bottom, 100 cm wide at the top, and has height 60 cm. If the trough is being filled with water at the rate of 0.1 m3/min, how fast (in m/min) is the water level rising when the water is 10 cm deep
Answer:
0.238 m/min
Explanation:
The volume of water in the trough V =Ah' where A = area of cross-section = area of isosceles trapezoid = 1/2(a + b)h where a = length of bottom of isosceles trapezoid = 40 cm = 0.4 m, b = length of top of isosceles trapezoid = 100 cm = 1 m and h = height of isosceles trapezoid = 60 cm = 0.6 m. So,
A = 1/2(a + b)h = 1/2(0.4 m + 1 m)0.6 m = (1.4 m)0.3 m = 0.42 m² and h' = height of water level in trough = H - h" where H = length of trough = 10 m and h" = depth of water level in trough = 10 cm = 0.1 m
So, V = Ah'
V = A(H - h") = A(10 - h")
Now, the rate of change of volume of the trough with respect to time dV/dt = d[A(10 - h")]/dt
dV/dt = -Adh"/dt
dh"/dt = -dV/dt/A
Since dV/dt = 0.1 m³/min, substituting the other variables into the equation, we have
dh"/dt = -dV/dt/A
dh"/dt = -0.1 m³/min/0.42 m²
dh"/dt = -0.238 m/min
This is the rate at which the depth is decreasing
Since the height h' = 10 - h"
dh'/dt = d(10 - h")/dt
= -dh"/dt
= -(-0.238 m/min)
= 0.238 m/min
So the water level is increasing at a rate of 0.238 m/min
The more mass an object has,the less inertia the object has. True or False
Answer:
This is true. objects that have a greater mass has greater interia. which also means objects that have a less mass has also less interia.
Explanation:
i hope this helps!!!
A person walks into a room that has, on opposite walls, two plane mirrors producing multiple images. Find the distances from the person to the first three images seen in the left-hand mirror, when the person is 5.80 ft from the mirror on the left wall and 13.7 ft from the mirror on the right wall.
Answer:
Explanation:
When the person stands 5.80 ft from the mirror of the wall.
a) The first image is found by multiplying the distance of the left mirror to the person.
i.e.
2 × 5.80 = 11.6 ft
b) The second image is deduced by the addition of the distance of the first image with the distance created by the right mirror.
i.e.
(2 × 13.7 ) + 11.6
= 39 ft
c) The third image is acquired by the addition of the image presented by the left mirror and the image presented by the right mirror.
(2 × 5.80) + 39
= 50.6 ft
A person is in a car crash and is not wearing their seatbelt. They hit their
head on the windshield. Explain why this is an example of Newton's First
Law
When a car's acceleration is negative, what is happening to the car's motion?
the car slows down
the car speeds up
the car travels at a constant speed
the car remains at rest
Answer:
the car slows down
Explanation:
The concepts in this problem are similar to those in Multiple-Concept Example 4, except that the force doing the work in this problem is the tension in the cable. A rescue helicopter lifts a 81.7-kg person straight up by means of a cable. The person has an upward acceleration of 0.729 m/s2 and is lifted from rest through a distance of 7.86 m. (a) What is the tension in the cable
Answer:
Explanation:
Given that:
distance (z) = 7.86 m
mass of the person = 81.7 kg
Acceleration (a) = 0.729 m/s²
By using Newton's second law along the vertical axis:
[tex]T - mg = ma\\ \\ T = ma + mg \\ \\ T = m(a+g) \\ \\[/tex]
T = 81.7 (0.729 +9.8)
T = 860.22 N
The work done now is:
[tex]W_T = T\times z \\ \\[/tex]
[tex]W_T = 860.22 \times 7.86[/tex]
[tex]\mathbf{W_T =6761.3292\ N}[/tex]
a jogger does 3.45 E 6 J of work and gives off 1.67 E 6 J of heat. what is the change in her internal energy? show your work
Answer:
well its burning its callories so thats it technically
Explanation:
120CD 165
उपम
DDL SL
NOH
3-33010
to
ग
tuous
car
Fusung
ता पनि
2 calcalcul e.
Power
dissipated in
heater if there
current flowing through
Ila 12v
headlamp
wh
flow the
L resistance cf ko a
Current
of 2A
प्ण्णा
5
a
through which a
is flowing
1.00 x 10^8 kg of clear liquid (specific heat
capacity = 5.11 x 10^2 J/kg•°C) at a temperature
of 15.0°C gains 3.33 x 10^6 J of heat. What is the
final temperature of the liquid? (Assume the
melting point is less than 15.0°C and the boiling
point is greater than 62.0°C.)
List 4 significant problems with nuclear power plants.
Answer:
1. could result in widespread contamination of air and water.
2. creation of radioactive wastes such as uranium mill tailings, spent (used) reactor fuel, and other radioactive wastes.
3. nuclear meltdowns
4. mining lung cancer risk
1. A 6-volt battery produces a current of 0.5 amps. What is the power in the circuit?
Answer:
hope this will help you
have a great day
Explanation:
please mark me as the brainliest
How to write the formula for water
An object has a mass of 50 kg on Earth. What would be the mass of that object in the Moon
It would be 50 kg.
Mass doesn't change.
Weight can.
Select the correct answer.
Which type of energy is thermal energy a form of
____ livestock are produce with extra copies of growth hormone genes to allow them to grow faster and produce meat that is low in fat
A) Cloned
B) Transcribed
C) Transgenic
D) Translated
A substance with a pH value of 2.3 would be classified as
O strong acid
O weak acid
O strong base
O weak base
A substance with a pH value of 2.3 would be classified as a strong acid. Option A is correct.
What is ph value?pH stands for "potential hydrogen," and it is a measure of the acidity or basicity (alkalinity) of a solution. The pH scale ranges from 0 to 14, with 7 being neutral (neither acidic nor basic). Solutions with a pH less than 7 are considered acidic, and solutions with a pH greater than 7 are considered basic.
Here,
The pH scale is used to measure the acidity or basicity of a solution. Values on the pH scale range from 0 to 14. Solutions with a pH value less than 7 are considered acidic, and solutions with a pH value greater than 7 are considered basic. The lower the pH value, the more acidic the solution.
A pH value of 2.3 indicates that the solution is strongly acidic, as it is well below the neutral value of 7.
Learn more about pH value here:
https://brainly.com/question/28580519
#SPJ6
A rod is heated at the rate of 30 watts at the middle point and is insulated at its two ends. The two half sections are cooled by convection by an ambient fluid at 20 degree Celsius with a heat transfer coefficient of 30 W/m^2 C. The diameter of the rod is 0.5 cm, its length is 18 cm and its thermal conductivity is 206 W/mC. Determine the temperature in the middle of the rod and at the insulated ends. Please describe your strategy of solving this problem.
thanks for the points
Explanation:
According to Lenz's law, an induced current in the direction depicted in the picture would be created when: a. An external downward field is created or an external upward field is removed b. An external upward filed is created or an external upward field is removed c. An external downward field is created or an external downward field is removed d. An external upward field is created or an external downward field is removed
Answer:
C. An external downward field is created or an external downward field is removed
Explanation:
As we can see that from the attached figure that the induced current would be counter clockwise. So the field occur because of induced current i.e. out of page. This represent that the current is induced in order to rise the flux out of the direction of the page
Therefore because of the external field, the field out of page & flux would be reducing or the external upward field is eliminated
So option C is correct
g A projectile of mass 3 kg is launched horizontally from an initial height 3 m with an initial velocity 10 m/s. This velocity in the x direction is preserved when you ignore air resistance. The projectile still accelerates in the vertical y direction toward the ground, but this is exactly the energy lost from potential energy. Energy is conserved as long as you use the total mechanical energy equation. What is the final kinetic energy as the projectile just reaches the ground
Answer:
The kinetic energy at ground will be "238.2 J".
Explanation:
The given values are:
mass,
m = 3 kg
Initial height,
h = 3 m
Initial velocity,
v = 10 m/s
By using the conservation of energy at points A and B,
⇒ [tex]E_A=E_B[/tex]
⇒ [tex]mgh+\frac{1}{2}mv^2=k_B[/tex]
On substituting the values, we get
⇒ [tex]3\times 9.8\times 3+\frac{1}{2}\times 3\times (10)^2=k_B[/tex]
⇒ [tex]88.2+0.5\times 3\times 100=k_B[/tex]
⇒ [tex]88.2+150=k_B[/tex]
⇒ [tex]238.2 =k_B[/tex]
An iron wire has a length of 1.50 m and a cross sectional area of 0.450 mm2. If the resistivity of iron is 10.0 ✕ 10−8 Ω · m and a potential difference of 0.800 V is maintained across its length, determine the current in the wire (in A)
Answer:
2400A
Explanation:
R=pL/A
R-Resistance
p-Resistivity=10.0 x 10^-8
L-1.5m
A-Cross sectional Area=0.00045
R=10.0 x 10^-8 x 1.5 ÷ 0.00045
and=0.000333333
I-current
V-potential difference
I=V/R
0.800÷0.000333333
Ans=2400A
what is a black whole why does it exist
Answer:
A black hole is a region of spacetime where gravity is so strong that nothing—no particles or even electromagnetic radiation such as light—can escape from it. The theory of general relativity predicts that a sufficiently compact mass can deform spacetime to form a black hole.
How to find force if mass time and distance is given?
Answer:
For example, speed is a length divided by time. Force is mass times acceleration, and is therefore a mass times a distance divided by the square of a time. We therefore say that [Force] = MLT−2.
How do magnets work and what effect do they have on their surroundings?
Answer:
Explanation: Magnets can be used in space. ... Magnets don't need gravity or air. Instead, their power comes from the electromagnetic field they generate all by themselves. One class of magnets, called electromagnets, does need electricity to work.
Answer:
magnets work due to a magnetic field and attract or repel an electrically charged or magnetic objects
Explanation:
its magnetism works due to alignment of atoms in a magnetic object
What is the salt formed in the second sample reaction?
Answer:
This powder is sodium chloride. In the second reaction (sulfuric acid with copper(II) oxide) the resulting solution was blue in colour. When this solution was heated a small amount of white powder was noted.
Explanation:
i saw it on quizlet
Does time stand still in space
Answer:
[tex]\underline{\textsf{\textbf{Answer -}}}[/tex]
No & Yes - the case depends actually.
You can't make the velocity zero and expect to stay in space. you will need to constantly fire the engine to hold youself in position (this is possible, until you run out of fuel).
Yes, it is possible to fire the engine and lift off earth into space, and then fire in the opposite direction to earths movement until you are still, relative to the sun. But if you now turn the engine off, the suns gravity will pull you down and directly into the sun.
its the earths forward motion that prevents it falling into the sun
Answer:
No & Yes - the case depends actually.
You can't make the velocity zero and expect to stay in space. you will need to constantly fire the engine to hold youself in position (this is possible, until you run out of fuel).
Yes, it is possible to fire the engine and lift off earth into space, and then fire in the opposite direction to earths movement until you are still, relative to the sun. But if you now turn the engine off, the suns gravity will pull you down and directly into the sun.
its the earths forward motion that prevents it falling into the sun