The age of the rock can be calculated as follows. In this case, the half-life of potassium-40 is 2.64 billion years.
The rock has only 1/8 of its original potassium-40 remaining. It's requested to find the age of the rock.Step-by-step explanation:
The decay formula is given as:
N(t) = N0 * e^(-λt)
where N0 is the initial amount of potassium-40, λ is the decay constant (related to the half-life by λ = ln(2) / t1/2), and N(t) is the amount remaining after time t.
In this problem, we are given that the rock has only 1/8 of its original potassium-40 remaining. This means that N(t) = (1/8)N0, and we want to solve for the time t.
Taking the natural logarithm of both sides of the first equation and rearranging, we get:
t = (1/λ) * ln(N0/N(t))
Substituting in the given values, we have:
t = (1/λ) * ln(N0 / (1/8)N0)
t = (1/λ) * ln(8)
t = (ln 8) / (λ / ln 2)
To find the value of λ, we can use the half-life of potassium-40:
t1/2 = 1.25 billion years = 1.25 * 10^9 years
λ = ln(2) / t1/2
λ = ln(2) / (1.25 * 10^9)
λ = 5.543 * 10^-10 /year
Substituting this into the previous equation, we have:
t = (ln 8) / (5.543 * 10^-10 /year / ln 2)
t ≈ 2.64 billion years
Therefore, the rock is approximately 2.64 billion years old.
To know more about "Potassium-40" refer here:
https://brainly.com/question/118171645#
#SPJ11
The age of the rock made up of potassium-40 is approximately 3.74 billion years old.
Potassium-40 decays to argon-40 has a half-life of 1.25 billion years. Suppose you find a rock that has only 1/8 of its original potassium-40 still remaining. Half-life of potassium-40, t1/2 = 1.25 billion years, Amount remaining = 1/8 of the original potassium-40.
Let the original amount of potassium-40 be P.
Rate of decay of potassium-40 = kP = P0 e^(-kt) Where, P0 is the original amount of potassium-40 and t is the time.
Arranging the above equation for t, we get: t = ln(P0/P)/k
Taking natural log both sides
P/P0 = (1/2)^(t/t1/2)ln(P/P0) = ln(1/2) t/t1/2t = (t1/2/ln(1/2)) ln(P0/P)
Substituting the given values,
t = (1.25 x 10^9/0.693) ln(1/(1/8))= (1.8 x 10^9) ln(8)= (1.8 x 10^9) (2.08)= 3.74 x 10^9 years
To know more about potassium-40, refer here:
https://brainly.com/question/9295288#
#SPJ11
Which of these ions has the smallest number of unpaired electrons?
V2+
Cr2+
Ni2+
Co2+
Fe3+
The ion with the smallest number of unpaired electrons is Ni2+.
Determination of number of unpaired electronsThe number of unpaired electrons in an ion depends on its electronic configuration, specifically the number of electrons in its partially filled d-orbitals.
Out of the given ions, V2+ and Cr2+ have the electronic configurations [Ar] 3d3 and [Ar] 3d4 respectively, and both have three unpaired electrons.
Ni2+ has the electronic configuration [Ar] 3d8, and it has two unpaired electrons.
Co2+ has the electronic configuration [Ar] 3d7, and it has three unpaired electrons.
Fe3+ has the electronic configuration [Ar] 3d5, and it has five unpaired electrons.
Therefore, Ni2+ has the smallest number of unpaired electrons among the given ions with two unpaired electrons.
More on unpaired electrons can be found here: https://brainly.com/question/29858800
#SPJ1
3.
(b) Sulfuryl fluoride is a tetrahedral molecule where the sulfur atom has no lone pairs of
electrons.
0=
F
F
Use the valence shell electron pair repulsion theory (VSEPR) to state why sulfuryl fluoride
has this shape.
[1]
According to the VSEPR theory, the shape of a molecule is determined by the repulsion between its electron pairs, both bonding and non-bonding.
What is VSPER theory in sulfuryl fluoride?In sulfuryl fluoride (SO2F2), the sulfur atom is surrounded by four regions of electron density: two single bonds with fluorine atoms and two double bonds with oxygen atoms. These four regions of electron density repel each other and arrange themselves as far apart as possible to minimize repulsion.
What is lone pair?Since the molecule has no lone pairs of electrons, the electron density is evenly distributed among the four regions around sulfur. This results in a tetrahedral shape, where the fluorine atoms and oxygen atoms are arranged symmetrically around the central sulfur atom, with bond angles of approximately 109.5 degrees.
To know more about VSEPR theory visit:-
brainly.com/question/17177984
#SPJ1
How many atoms are in 6 KCIO3?
There are 3.6312 x 10²⁴ atoms in 6 moles of KCIO3 because there are 6 moles of KCIO3 and 6.022 x 10²³ atoms per mole.
What fraction of a molecule is KClO3?Potassium One atom of potassium, three atoms of oxygen, and one atom of chlorine make up the inorganic substance chlorate.
The molar mass of KCIO3 is:
K = 39.10 g/mol
Cl = 35.45 g/mol
I = 126.90 g/mol
O3 = (16.00 x 3) g/mol = 48.00 g/mol
Molar mass of KCIO3 = K + Cl + I + 3O3
= 39.10 + 35.45 + 126.90 + 3(48.00)
= 307.35 g/mol
6 KCIO3 = 6 moles KCIO3
Number of atoms = 6 moles [tex]KCIO3 x 6.022 x 10^23[/tex] atoms/mol
[tex]= 3.6312 x 10^24 atoms[/tex]
To know more about atoms visit:-
https://brainly.com/question/30898688
#SPJ1
What is the oxidation number of manganese (Mn) in potassium permanganate (KMnO4)?+5, +7, +8, +9
The oxidation number of manganese (Mn) in potassium permanganate (KMnO4) is B. +7.
Potassium permanganate is a strong oxidizing agent that is commonly used in organic chemistry to oxidize alcohols, aldehydes, and ketones to carboxylic acids. Its formula is KMnO4.The oxidation state of manganese in KMnO4 is determined by subtracting the sum of the oxidation states of potassium, oxygen, and hydrogen from the overall charge of the molecule. The oxidation state of potassium is +1, and the oxidation state of oxygen is -2. Hydrogen's oxidation state is +1, and it is usually removed from the organic compound in question, so it is not included in the final calculation. For KMnO4, the overall charge is -1. Using this information,
we can calculate the oxidation state of manganese as follows: Oxidation state of Mn + Oxidation state of K + 4(Oxidation state of O) = -1Oxidation state of Mn + 1 + 4(-2) = -1Oxidation state of Mn - 7 = -1 Oxidation state of Mn = +7Therefore, the oxidation state of manganese in potassium permanganate is +7. Therefore the correct option is B
The complete question is :
What is the oxidation number of manganese (MN) in potassium permanganate (KMnO4)?
A. +5,
B. +7,
C. +8,
D. +9
Know more about oxidation number here:
https://brainly.com/question/30770473
#SPJ11
what is the pressure in a region of outer space where there is 1 molecule/cm3 and the temperature is 3 k?
The pressure in a region of outer space where there is 1 molecule/cm3 and the temperature is 3 K would be 3.91 x 10^-23 Pa.
Ideal gas problemIn a region of outer space where there is 1 molecule/cm3 and the temperature is 3 K, we can use the ideal gas law to calculate the pressure. However, it is important to note that the ideal gas law assumes that the gas molecules are in constant motion and interact with each other through perfectly elastic collisions, which may not be entirely accurate for outer space conditions.
The ideal gas law is given by:
PV = nRT
where P is the pressure in pascals (Pa), V is the volume in cubic meters (m3), n is the number of moles of gas, R is the gas constant (8.314 J/(mol·K)), and T is the temperature in Kelvin (K).
We are given that there is 1 molecule/cm3 in this region of outer space. This can be converted to the number of moles of gas using Avogadro's number:
1 molecule/cm3 = 1.66 x 10^-24 mol/m3
The volume can be assumed to be very large since we are in outer space, so we can approximate it as infinity (i.e., V = ∞).
Now we can plug in the values:
PV = nRT
P(∞) = (1.66 x 10^-24)(8.314)(3)
P = 3.91 x 10^-23 Pa
Therefore, the pressure in a region of outer space where there is 1 molecule/cm3 and the temperature is 3 K is approximately 3.91 x 10^-23 Pa.
More on ideal gas can be found here: https://brainly.com/question/3961783
#SPJ1
Why does California has areas that are colder than Nevada even though they are similar in latitude?
O Warm ocean currents travel across California.
O Cold ocean currents travel across California.
O Cold ocean currents travel across Nevada.
Warm ocean currents travel across Nevada
O
A
1
2 3
4.
5 6
Answer:
Explanation:
The main reason why California has areas that are colder than Nevada, despite being at similar latitudes, is due to the influence of ocean currents. Specifically, California is impacted by a cold ocean current known as the California Current, which flows southward along the western coast of North America, while Nevada is an inland state without access to any major ocean currents.
The California Current brings cool water from the Gulf of Alaska down the coast, resulting in lower temperatures along the California coast, particularly in the northern regions. In contrast, Nevada has a desert climate with high temperatures and low humidity, due to its inland location and lack of major bodies of water.
So, the correct option would be "Cold ocean currents travel across California." (Option 2).
what concentration of the lead ion, pb2 , must be exceeded to precipitate pbcl2 from a solution that is 1.00×10−2 m in the chloride ion, cl− ? ksp for lead(ii) chloride is 1.17×10−5 .
We can use the solubility product constant (Ksp) for lead(II) chloride, which is 1.17 x 10-5 to determine the concentration of the lead ion (Pb2+) that must be exceeded to precipitate PbCl2 from a 1.00 x 10-2 M solution of chloride ions (Cl-).
The equilibrium constant for a solid material dissolving in an aqueous solution is denoted by the solubility product constant, which is abbreviated as Ksp. It is a measurement that indicates how much of a solute may be dissolved in a solution. The Ksp value of a material is greater when it has a higher degree of solubility.
The dissociation reaction for PbCl2 in water is:
PbCl2(s) ⇌ Pb2+(aq) + 2Cl-(aq)
The Ksp expression for this reaction is:
Ksp = [Pb2+][Cl-]^2
We are given the concentration of Cl- as 1.00 x 10^-2 M. Let [Pb2+] = x, so we can plug in the values into the Ksp expression:
1.17 x 10^-5 = x(1.00 x 10^-2)^2
Now, solve for x:
x = (1.17 x 10^-5) / (1.00 x 10^-2)^2
x ≈ 1.17 x 10^-1
Therefore, the concentration of lead ion (Pb2+) that must be exceeded to precipitate PbCl2 from the solution is approximately 1.17 x 10^-1 M.
To know more about the Ksp https://brainly.com/question/27132799
#SPJ11
WILL MARK BRAINLIEST PLS HELP! Predict whether or not the following single replacement reaction will happen. If the reaction will occur, write a complete balanced equation.
Calcium + Lead (II) nitrate →
Answer:
A Single replacement/displacement reaction will occur, making the equation:
Calcium + Lead (II) nitrate → Calcium Nitrate + Lead (II)
Ca + Pb(NO3)2 → Ca(NO3)2 + Pb
Explanation:
Calcium is more reactive than Lead in the reactivity series so theoretically will replace in Lead in Lead Nitrate, forming Calcium Nitrate.
Hopefully this helps!!!
how many chirality centers are there in an aldohexose?
Aldohexoses have four chiral focuses and, in this way, 24 = 16 isomers. There will be eight d-isomers and eight l-isomers. Thusly, the quantity of enantiomer matches is 8 (2n−1).
An aldohexose has four chiral focuses.
So there are
24=16
optical isomers.
Their perfect representations are the L-aldohexoses, the other 8 of the 16.
Their names are L-allose, L-altrose, L-glucose, and so on.
Consequently, every one of the 16 aldohexoses has its own name.
The four chiral focuses in glucose show there might be upwards of sixteen (24) stereoisomers having this constitution. These would exist as eight diastereomeric sets of enantiomers, and the underlying test was to figure out which of the eight related to glucose. This challenge was acknowledged and met in 1891 by German physicist Emil Fischer. His fruitful exchange of the stereochemical labyrinth introduced by the aldohexoses was a sensible masterpiece, and it is fitting that he got the 1902 Nobel Prize for science for this achievement. At the time Fischer embraced the glucose project laying out the outright setup of an enantiomer was unrealistic. Thusly, Fischer pursued an erratic decision for (D)- glucose and laid out an organization of related aldose setups that he called the D-family. The identical representations of these arrangements were then assigned the L-group of aldoses. To represent utilizing present-day information, Fischer projection formulas and names for the D-aldose family (three to six-carbon atoms) are displayed underneath, with the uneven carbon atoms (chiral focuses) hued red.
to know more about glucose click here:
https://brainly.com/question/397060
#SPJ4
how does understanding of matter help humans move from stone age to the iron age?
Understanding matter and its properties helped humans move from the stone age to the iron age by enabling them to develop new materials and technologies. In the stone age, humans used materials such as stone, bone, and wood to create tools and weapons. However, these materials had limitations in terms of their strength, durability, and ability to hold a sharp edge.
As humans began to understand the properties of matter, they were able to experiment with new materials and processes. For example, they learned that by heating certain rocks, they could extract metals such as copper and tin, which could be used to create stronger tools and weapons. By combining copper with tin, they discovered that they could create bronze, which was even stronger and more durable.
Eventually, humans discovered how to extract iron from iron ore and use it to create even stronger tools and weapons. This knowledge of matter and metallurgy enabled humans to advance technologically and culturally, leading to the development of civilizations and the rise of empires.
In summary, understanding the properties of matter helped humans move from the stone age to the iron age by enabling them to experiment with new materials and develop new technologies. This process of discovery and innovation continues to this day, as scientists and engineers continue to push the boundaries of our knowledge and understanding of the natural world.
Down
15. a liquid can ____ from one place to another
18.a Bunsen burner adds heat _____ to something
Across
14. characteristics of a substance
16. it ______ was 250ml
Answer:
15. Flow
16. Volume
Explanation:
That must be the right answer
Which best describes the pH at the equivalence point of a titration of a weak base with a strong acid?
A. less than zero
B. between 0 and 7
C. close to 7.0
D. between 7 and 14
E. greater than 14
the correct option is D. between 7 and 14 best describes the pH at the equivalence point of a titration of a weak base with a strong acid.
The pH at the equivalence point of a titration of a weak base with a strong acid is somewhere in the range of 7 and 14. At the equivalence point, the quantity of moles of the base is equivalent to the number of moles of acid added. The pH at the equivalence point depends on the strength of the weak base. On the off chance that the weak base is exceptionally weak, the pH at the equivalence point will be closer to 7.0. If the weak base is stronger, the pH at the equivalence point will be closer to 14.0.
A weak base is a substance that, when dissolved in water, does not break totally into its constituent ions. Weak bases have some other properties, such as their solutions being unfortunate conductors of power. They are also categorized as weak electrolytes. Examples of weak bases incorporate smelling salts (NH3), pyridine (C5H5N), and trimethylamine (N(CH3)3).
to know more about strong acids click here:
https://brainly.com/question/30782679
#SPJ4
a gaseous mixture contains 1.50 mol of o2, 2.50 mol of he and 0.500 mol of n2. the partial pressue of the oxygen is 0.300atm. what are the partial pressures of the nitrogen and the helium
The partial pressure of nitrogen is 0.116 atm and the partial pressure of helium is 0.583 atm.
To find the partial pressures of nitrogen and helium, we can use the fact that the total pressure of the mixture is equal to the sum of the partial pressures of each component:
P_total = P_O2 + P_He + P_N2
We are given the partial pressure of oxygen as P_O2 = 0.300 atm. We can find the total number of moles of gas in the mixture as:
n_total = n_O2 + n_He + n_N2 = 1.50 mol + 2.50 mol + 0.500 mol = 4.50 mol
We can use the mole fraction of each component to find the partial pressure of nitrogen and helium.
X_N2 = n_N2 / n_total = 0.500 mol / 4.50 mol = 0.111
X_He = n_He / n_total = 2.50 mol / 4.50 mol = 0.556
The mole fraction of oxygen is then:
X_O2 = n_O2 / n_total = 1.50 mol / 4.50 mol = 0.333
We can use these mole fractions to find the partial pressures of nitrogen and helium:
P_N2 = X_N2 * P_total = 0.111 * P_total
P_He = X_He * P_total = 0.556 * P_total
Substituting the given value for P_O2 and adding the expressions for P_N2 and P_He, we get:
P_total = P_O2 + P_N2 + P_He
P_N2 + P_He = P_total - P_O2 = (1.000 atm - 0.300 atm) = 0.700 atm
Substituting the expressions for P_N2 and P_He in terms of mole fractions, we get:
0.111 * P_total + 0.556 * P_total = 0.700 atm
0.667 * P_total = 0.700 atm
P_total = 1.049 atm
Now we can use the expressions for P_N2 and P_He in terms of mole fractions to find their partial pressures:
P_N2 = 0.111 * P_total = 0.116 atm
P_He = 0.556 * P_total = 0.583 atm]
Learn more about moles here:
https://brainly.com/question/28239680
#SPJ1
Please help asapppppp pleaseeeeeeeeeee
The overall balanced nuclear equation for the process is:
234[tex]Th_{90}[/tex] → 230[tex]Th^{90}[/tex] + 2α + 2β-1 + 2νe
What is nuclear equation?
The overall nuclear reaction for the decay of thorium-234 to thorium-230 via protactinium-234 and uranium-232 can be written as follows:
234[tex]Th_{90}[/tex] → 234[tex]Pa_{91}[/tex] + 0β-1 + νe
234[tex]Pa_{91}[/tex] → 232[tex]U_{92}[/tex] + 2β-1 + 2νe
232[tex]U_{92}[/tex] → 230[tex]Th_{90}[/tex] + 2α
Combining these three equations, we can write the overall balanced nuclear equation for the process:
234Th90 → 230Th90 + 2α + 2β-1 + 2νe
This equation represents the complete decay of thorium-234 to thorium-230 via the intermediate steps of protactinium-234 and uranium-232. It shows that the decay process involves the emission of a beta particle and two alpha particles.
Note that the conservation of mass and atomic numbers are satisfied in this overall reaction, since the mass number and atomic number are the same on both sides of the equation.
To know more about nuclear equation, visit:
https://brainly.com/question/19752321
#SPJ1
explain how the presence of cacl2 affects the molar solubility of ca(oh)2. use data from your experiment to justify your answer.
The presence of CaCl2 affects the molar solubility of Ca(OH)2 by decreasing it.
When CaCl2 is added to a solution containing Ca(OH)2, it ionizes to produce Ca2+ ions and Cl- ions. This addition of Ca2+ ions to the solution containing Ca(OH)2 creates a common ion effect, which decreases the solubility of Ca(OH)2 by shifting the equilibrium to the left. Experimentally, this effect can be observed by adding different concentrations of CaCl2 to a solution containing Ca(OH)2 and measuring the resulting molar solubility of Ca(OH)2. As the concentration of CaCl2 is increased, the molar solubility of Ca(OH)2 decreases.
The presence of CaCl2 in a solution containing Ca(OH)2 has an effect on the molar solubility of Ca(OH)2 by decreasing it. This is due to the common ion effect, where the addition of Ca2+ ions to the solution containing Ca(OH)2 decreases its solubility by shifting the equilibrium to the left. Experimentally, this can be observed by adding different concentrations of CaCl2 to a solution of Ca(OH)2 and measuring the molar solubility of Ca(OH)2. As the concentration of CaCl2 increases, the molar solubility of Ca(OH)2 decreases.
Learn more about solubility at:
https://brainly.com/question/9098308
#SPJ11
solutions of the [v(oh2)6]2 ion are lilac and absorb light of wavelength 806 nm . calculate the ligand field splitting energy in the complex in units of kilojoules per mole.
The ligand field splitting energy in the complex in units of kilojoules per mole when the solutions of the [V(OH2)6]2 ion are lilac and absorb light of wavelength 806 nm is 331kJ/mol. To calculate the ligand field splitting energy in the complex.
The ligand field splitting energy in the complex can be calculated by the following formula:Δoct = hc/λ Where,Δoct = Ligand field splitting energy hc = Planck's constant (6.626 x 10^-34 J s)λ = wavelength of light absorbed In the given problem, the absorbed wavelength of light is 806 nm. So we need to convert it into meters as we have to use the value in the formula. c = speed of light = 3.0 x 10^8 m/sλ = 806 nm = 806 x 10^-9 m Substituting the values in the formula:Δoct = hc/λ = (6.626 x 10^-34 J s) x (3.0 x 10^8 m/s) / (806 x 10^-9 m) = 2.477 x 10^-19 J= 2.477 x 10^-19 J x 1 kJ/1000J x NA Where NA is Avogadro's number (6.022 x 10^23)Thus, Δoct = 331 kJ/mol (approx.)Therefore, the ligand field splitting energy in the complex in units of kilojoules per mole is 331 kJ/mol.
for more such questions on splitting energy
https://brainly.com/question/13822346
#SPJ11
the ph of a 1.00 m solution of caffeine, a weak organic base, is 12.300. calculate the ka of protonated caffeine.
How many grams are in 0.8mol of K20? The molar mass of K2O is 94.2g/mol. a. 117.75 g b. 1.08 g c. 75.36 g d. 15 g
The correct option is c. 75.36g. The given oxide is named Potassium Superoxide, as it contains O2-anion which is known as superoxide.
As per the mole concept,
1 mol of the compound holds a similar measure of the compound as demonstrated by its molar mass.
In this way, here,
Molar mass is= 94.2 g/mol
Implies, 1 mol of compound holds 94.2 g of it
In this way, 0.8 mol of compound holds (94.2×0.8) g of it = 75.36 g
Thus, the right response is-75.36 g.
The mole concept is a helpful technique for communicating how much a substance is. Any estimation can be separated into two sections - the mathematical extent and the units that the greatness communicated. For instance, when the mass of a ball is estimated to be 2 kilograms, the size is '2' and the unit is 'kilogram'.
While managing particles at a nuclear (or molecular) level, even one gram of an unadulterated component is known to contain an enormous number of iotas. This is where the mole concept is generally utilized. It basically centers around the unit known as a 'mole', which is a count of an extremely enormous number of particles.
to know more about mole click here:
https://brainly.com/question/29367909
#SPJ4
Categorize the following exercises as being isometric or isotonic.1. Pushing constantly against a concrete wall2. Running up a hill3. Swimming freestyle4. Pedaling a bicycle on a flat surface5. Holding a bench-press bar in the same position6. Doing a plank exercise (holding a push-up position)7. Balancing on tiptoes8. Doing bicep curls
The following are categorized into isometric and isotonic:
Isometric: Pushing constantly against a concrete wall, Holding a bench-press bar in the same position, Doing a plank exercise (holding a push-up position), and Balancing on tiptoes.
Isotonic: Running up a hill, Swimming freestyle, Pedaling a bicycle on a flat surface, and Doing bicep curls.
Isometric exercises are exercises where a muscle or group of muscles contracts without any change in length. These exercises involve the muscle or group of muscles contracting against an immovable object or against an opposing force. Examples of isometric exercises are pushing against a wall, holding a plank, and doing a wall sit.
Isotonic exercises are exercises that involve the muscle or group of muscles contracting against resistance, and causing a change in the muscle’s length. These exercises involve the muscle or group of muscles contracting and then extending against a fixed weight or external force.
Examples of isotonic exercises are running up a hill, swimming freestyle, pedaling a bicycle on a flat surface, doing bicep curls, and doing leg extensions.
1. Pushing constantly against a concrete wall - Isometric Exercise
2. Running up a hill - Isotonic Exercise
3. Swimming freestyle - Isotonic Exercise
4. Pedaling a bicycle on a flat surface - Isotonic Exercise
5. Holding a bench-press bar in the same position - Isometric Exercise
6. Doing a plank exercise (holding a push-up position) - Isometric Exercise
7. Balancing on tiptoes - Isometric Exercise
8. Doing bicep curls - Isotonic Exercise
To know more about isometrics refer here:
https://brainly.com/question/27999637#
#SPJ11
In which solution is AgCl most soluble?
A. in a solution that is 0.20 M in CaCl2
B. in a solution that is 0.20 M in AgNO3
C. in a solution that is 0.20 M in KNO3
AgCl (silver chloride) is most soluble in a solution that is 0.20 M in AgNO₃. Option B is correct.
Solubility is the property of a substance to dissolve in a solvent to form a homogeneous solution. It is typically measured as the maximum amount of a solute that can dissolve in a given amount of solvent at a specific temperature and pressure. The solubility of a substance depends on various factors, such as temperature, pressure, solvent, and the presence of other solutes in the solution.
AgCl is sparingly soluble in water, but its solubility can be increased by the presence of common ions such as Ag⁺ from AgNO₃. The addition of Ca₂⁺ or K⁺ ions from CaCl₂ or KNO₃ will not have a significant effect on the solubility of AgCl.
Hence, B. in a solution that is 0.20 M in AgNO₃ is the correct option.
To know more about Solubility here
https://brainly.com/question/22185953
#SPJ4
zeolites theoretically can be made magnetic by adding sodium ion to them.T/F
The given statement is true. Zeolites hypothetically can be made attractive by adding sodium particles to them. Zeolites are utilized as sponges just and have no different purposes.
A compelling method for testing how much red color is in a watery arrangement is to gauge how much red light (620-750 nm) is consumed by the arrangement.
The expression "zeolite" was first utilized in the year 1756 by Axel Fredrik Cronstedt, a Swedish mineralogist. During a course of quickly warming a material that was seen to be stilbite, it delivered a lot of steam. This was because of the water that the material had retained before. Subsequent to seeing such turns of events, he authored the term zeolite. It has been gotten from the Greek words, ζέω (zéō), signifying "to bubble" and λίθος (líthos), signifying "stone".
Engineered zeolites are normally blended by a course of slow crystallization of a silica-alumina gel within the sight of salts and natural layouts. Curiously, various designs could be made utilizing this interaction. Aside from varieties in structures, zeolites can be fabricated or produced using different iotas making them synthetically fascinating and dynamic. For example, purported heteroatoms incorporate germanium, iron, gallium, boron, zinc, tin, and titanium.
to know more Zeolites click here:
https://brainly.com/question/14976531
#SPJ4
which characteristic belongs to metal elements
c. Easily Gain Electrons. Easily Gain Electrons belongs to metal elements.
Metal elements are characterized by having relatively low ionization energies and high electronegativities. This allows them to easily gain electrons from other elements in chemical reactions.Metals are chemical elements that are characterized by their ability to conduct electricity, have a metallic luster, and are malleable and ductile. They are divided into two main categories: ferrous metals, which contain iron, and non-ferrous metals, which do not.An atom can easily gain electrons by participating in a redox reaction. This is when electrons are transferred between two atoms, and the atom that receives the electrons gains them.
learn more about Metal elements Refer:brainly.com/question/17085815
#SPJ1
a 25.00 ml volume of hcl is titrated to endpoint with 27.46 ml of 0.1138 m naoh. what the the initial concentration of hcl?
The initial concentration of the HCl solution was 0.1251 M.
The balanced chemical equation for the reaction between hydrochloric acid (HCl) and sodium hydroxide (NaOH) is:
HCl + NaOH → NaCl + H2O
We can use the balanced equation and the volume and concentration of the NaOH solution to calculate the number of moles of NaOH used in the titration:
moles of NaOH = volume of NaOH x concentration of NaOH
moles of NaOH = 0.02746 L x 0.1138 mol/L
moles of NaOH = 0.003127 mols
Since HCl and NaOH react in a 1:1 ratio, the number of moles of HCl used in the titration is also 0.003127 moles.
Now, we can use the number of moles of HCl and the volume of HCl to calculate the initial concentration of HCl:
moles of HCl = concentration of HCl x volume of HCl
0.003127 mol = concentration of HCl x 0.02500 L
concentration of HCl = 0.1251 M
Therefore, the initial concentration of the HCl solution was 0.1251 M.
Learn more about molarity on:
https://brainly.com/question/14469428
#SPJ11
a sample of a molecular compound was analyzed and found to contain 0.707 grams carbon (c), 0.2372 grams of hydrogen (h). determine the empirical formula of the compound. given the added information that the molar mass of the compound is 8 times the empirical mass, determine the molar mass of the compound.
The molar mass of the compound is 128.4 g/mol.
The empirical formula is an empirical formula that represents the lowest whole-number ratio of the atoms present in a compound. The empirical formula for the molecular compound is calculated using the percentage composition of the elements present in the compound. The steps used to find the empirical formula are as follows:
Find the mass of each element present in the compound.Convert each mass to moles.Divide each mole value by the smallest number of moles.Round to the nearest whole number and write the subscripts.The molar mass is the mass of a substance that contains 6.02 × 10²³ atoms or molecules. To calculate the molar mass of a compound, add the masses of all the atoms present in the compound.
C=0.707g,12.01 g/mol=0.0588 molCnH=0.2372 =1.01g/m=0.235 mol H
nH=4nC
The empirical formula of the compound is CH4. The molar mass of the compound can be calculated using the empirical formula.
M=12.01 g/mol+4(1.01 g/mol)=16.05 g/mol
The molar mass of the compound is 8 times the empirical mass, so the actual molar mass is;
M=8(16.05{g/mol})=128.4g/mol. The molar mass of the compound is 128.4 g/mol.
More on molar mass: https://brainly.com/question/15583536
#SPJ11
radium has a hald life of 1500 years, how long would it take for 250kg to decay down to less than 10kg
It would take approximately 4858.35 years for 250 kg of radium to decay down to less than 10 kg.
The amount of time it takes for a given amount of radium to decay to a certain level can be determined using the radium's half-life. This can be done using the following formula:
Amount of time = Half-life x ln (Initial amount/Final amount)
Given that radium has a half-life of 1500 years, we can use this formula to determine the amount of time it takes for 250 kg of radium to decay down to less than 10 kg.
Initial amount of radium = 250 kg
Final amount of radium = 10 kg
Half-life of radium = 1500 years
Amount of time = Half-life x ln (Initial amount/Final amount)
Amount of time = 1500 x ln (250/10)
Amount of time = 1500 x ln (25)
Amount of time = 1500 x 3.2189
Amount of time ≈ 4858.35 years
Therefore, it would take 4858.35 years.
To learn more about "radium", visit: https://brainly.com/question/23823176
#SPJ11
the instantaneous rate of a reaction can be read directly from the graph of molarity versus time at any point on the graph. the instantaneous rate of a reaction can be read directly from the graph of molarity versus time at any point on the graph. true false
The statement "the instantaneous rate of a reaction can be read directly from the graph of molarity versus time at any point on the graph." is False
Instantaneous rate of reaction is the rate at which a chemical reaction is occurring at a specific moment in time.
It is the slope of the tangent line at that particular point in time. The instantaneous rate of a reaction can be determined from a graph of concentration vs time.
We must draw a tangent line at the point in the graph that we are interested in, and the slope of that tangent line is the instantaneous rate of the reaction.
The rate can also be determined by finding the slope of a secant line over a very small time interval.
So, the given statement, “the instantaneous rate of a reaction can be read directly from the graph of molarity versus time at any point on the graph” is not true, and the correct answer is False.
To know more about molarity, refer here:
https://brainly.com/question/8732513#
#SPJ11
At what temperature does (5.9000x10^1) g of ammonia gas exert a pressure of (1.70x10^2) kPa in a (9.300x10^1) L container?
To solve this problem, we can use the ideal gas law, which relates the pressure, volume, temperature, and number of moles of a gas:
PV = nRT
where P is the pressure in Pa, V is the volume in m³, n is the number of moles, R is the ideal gas constant (8.31 J/(molₓK)), and T is the temperature in Kelvin.
First, we need to convert the pressure from kPa to Pa and the volume from L to m³:
P = 1.70x10² kPa x 1000 Pa/kPa = 1.70x10⁵ Pa
V = 9.300x10¹ L x 0.001 m³/L = 0.093 m³
Next, we need to calculate the number of moles of ammonia using its molar mass:
molar mass of ammonia (NH3) = 14.01 g/mol + 3(1.01 g/mol) = 17.03 g/mol
moles of NH3 = 5.9000x10¹ g ÷ 17.03 g/mol = 3.462 mol
Now we can rearrange the ideal gas law to solve for the temperature:
T = PV ÷ nR
T = (1.70x10⁵ Pa)(0.093 m³) ÷ (3.462 mol)(8.31 J/(molₓK))
T = 686.3 K
Therefore, at a temperature of 686.3 K (413.1 °C or 775.6 °F), 5.9000x10¹ g of ammonia gas would exert a pressure of 1.70x10² kPa in a 9.300x10¹ L container.
To know more about ideal gas law, visit :
https://brainly.com/question/28257995
#SPJ1
describe the motion and arrangement of atoms during the solid phase (ice). the volume or amount of space taken up is [definite/indefinite]. the shape of ice is [definite/indefinite].
In the solid phase, the atoms of a substance are closely packed together and held in a fixed position by intermolecular forces. In the case of ice, which is a solid form of water, the atoms are arranged in a regular pattern, forming a crystal lattice structure.
The motion of atoms in the solid phase is limited to small vibrations around their fixed positions. These vibrations are caused by thermal energy, but they are not significant enough to overcome the intermolecular forces that hold the atoms in place. As a result, the shape of the solid, including ice, is definite and maintains a fixed shape.
The volume or amount of space taken up by a solid, including ice, is also definite. The intermolecular forces between the atoms prevent them from moving around freely, and as a result, the solid has a fixed volume.
Overall, in the solid phase, such as ice, the arrangement of atoms is regular and fixed, and their motion is limited to small vibrations around their fixed positions. The volume or amount of space taken up is definite, and the shape is also definite and maintains a fixed shape.
To learn more about atoms refer to:
brainly.com/question/30898688
#SPJ4
list and describe the three subatomic particles that make up atoms.
Atoms are made up of three subatomic particles: protons, neutrons, and electrons. Protons are positively charged particles found in the nucleus of an atom.
They have a mass of approximately 1 atomic mass unit (AMU). Neutrons, also found in the nucleus, have no charge and have a mass of approximately 1 amu. Electrons are negatively charged particles that orbit around the nucleus in shells or energy levels. They have a much smaller mass than protons and neutrons and are responsible for chemical reactions and bonding between atoms. Understanding the properties and behaviors of these subatomic particles is crucial in understanding the nature of matter and the physical world around us.
Find out more about subatomic particles
at brainly.com/question/19818822
#SPJ4
Can I get any help for 25pts
Answer: In the Picture all the question has been done
Explanation: