Ten examples of artificial luminous objects
paper, pencil, wood, human beings, moon.
Luminous objects are those objects which emit their own light.
Luminous objects can be natural as well as manmade.
One of the examples of natural luminous objects are- torch bulb, stars, sun, lighted candle.
Artificial luminous objects are those which cannot emit their own light.
Some of the examples of the artificial luminous objects are- paper, pencil, wood, human beings, moon.
answer right away!!—A plucked guitar string emits a dominant
frequency of 320 Hz. What is the
frequency of the 3rd harmonic?
Answer:
20000000000000hz only for this
I need help plz!!! Please help...
Answer: 60
Explanation:
How does a “super-crest” form?
a) It is the meeting of two waves coming from two different points, traveling at the same frequency.
b) It is the separation of two waves coming from the same point, traveling at the same frequency.
Answer Quickly, Please!!!
Answer:
a.) It is the meeting of two waves coming from two different points, traveling at the same frequency.
Explanation:
Correct me if I'm wrong, it's just my own opinion. Thankyouu!
Answer:
A. It is the meeting of two waves coming from two different points, traveling at the same frequency.
Explanation:
If the crest of 1 wave meets the crest of a second wave at a given instant in time and location along the medium, a "super crest" is formed, hope this helps....
PLZZ IF ANYONE KNOWS SCIENCE HELP ME PLZ I this is so confusing :(
ill liderally make a question with 50 and a brainliest since you helped me ;-;
Answer:
i think it would be either b or c because....
Explanation:
"The desert biome is best adapted for aloe because aloe plant usuallly grows in open area under sunlight exposure where the intensity of sunlight is very high. Its grows in very rocky, dry and open areas."
What is sin(77°)? plz help
Answer:
Value of Sin(77 degree) = 0.97437006
Degree / Radian Function
(angle in degree) (angle in radian) Sin Cos Tan Cot Sec Cosec SinH CosH TanH CosecH SecH CotH Arc Sin Arc Cos Arc Tan Arc Cosec Arc Sec Arc Cot
a metal rod has drawing pins stuck to it with wax and is heated at one end...
a)what do you think will happen in this experiment?explain your answer
b)how could this experiment be adapted to compare the codnucting properties of different materials?
If Lillian weighs 500 N, what is her weight in pounds?
Answer:
112.404 Pounds
Explanation:
divide the force value by 4.448
What units are used to measure mass and weight?
O Mass and weight are measured in kilograms. O Mass and weight are measured in newtons. Mass is measured in kilograms, and weight is measured in newtons.
O Mass is measured in newtons, and weight is measured in kilograms.
Answer:
mass is measured in kilograms and weight is measured in newtons
Explanation:
PLEASE HELP!!! *FOR TEST TMR*
What is the Scientific definition of Consumerism?
Explanation:
Consumerism is a social and economic order that encourages the purchase of goods and services in ever-greater amounts. ... In economics, consumerism refers to economic policies placing emphasis on consumption.
If a cat falls off a ledge, the Earth pulls the cat to the ground with the force of gravity. According to Newton's Third Law there must be a reaction force. What is that reaction force?
A. The cat pulls on the Earth
B. The cat’s acceleration is decreased by air resistance
C. The Earth hits the cat
D. The cat falls to the ground
E. The cat hits the Earth
Answer:
The answer Is B.
Explanation:
The cats acceleration is decreased
by air resistance.
hope it helps you!
follow me for more
don't worry I'll try my best
A car traveling at 65 mph is an example of its
Answer:
Speed
Explanation:
The distance traveled by an object in a unit of time is speed
Choose the word that BEST completes the following sentence. Saturn’s rings have been assigned a letter, based on their location. The rings A and B are separated by: Titan The Cassini Division Stars An open space fairly equivalent to the Grand Canyon
Answer:
The correct answer would be Saturn's Cassini Division.
Explanation:
Read about it here.
https://caps.gsfc.nasa.gov/simpson/kingswood/rings/
Hope this helps! :)
Decribe what must happen inside of an aluminum can in order for it to be attracted to a positively-charged and to a negatively-charged object
Answer:
The PROTONS in the can attract to the negatively charged object, so then the can becomes polarized and the ELECTRONS in the can attract the positively charged object.
Explanation:
The PROTONS inside the can entice to the negatively charged object, so then the can will become polarized and the ELECTRONS in the can appeal to the undoubtedly charged item.
How are proton and electron associated?The number of protons within the nucleus of the atom is identical to the atomic range. The variety of electrons in an impartial atom is identical to the number of protons. The mass range of the atom (M) is equal to the sum of the wide variety of protons and neutrons inside the nucleus.
Protons definitely charged subatomic particles that live in the nucleus. Neutrons: Neutrally charged subatomic particles that are living in the nucleus. Electrons: Negatively charged subatomic debris found inside the electron shells surrounding the nucleus.
An electron is a negatively charged factor of an atom while the proton is an undoubtedly charged frame. The electrons are present out of doors the nucleus inside the orbiting shells. But the protons alongside neutrons shape the nucleus of the atom and are gifted in the middle of the atomic nuclei.
Learn more about electron and proton here: https://brainly.com/question/4894505
#SPJ2
plz answer fast need your help plz
hello friends the answer does not exist
do you love me or not
Ayala is making salad dressing. She mixes oil and vinegar in a blender until a smooth consistency is formed. Explain whether this is a heterogeneous or a homogeneous mixture and why
Answer:Hetero
Explanation: Honestly, same as the last guy said
R
R2
R
100 12
300 12
50 12
The question below refers to the circuit shown in the image
9V -
What is the equivalent resistance of the circuit?
O 1500
0 3500
Ο 400Ω
O 4500
Answer:
3500 i would think
Explanation:
If a chemical reaction has a AH value of -125 kJ, it would be considered what?
Answer:
Exothermic Reaction
Explanation:
ENDOTHERMIC REACTION: A chemical reaction is considered endothermic if the energy is absorbed during the reaction. In other words, if the energy is required by the reactants to proceed with the reaction, then the reaction is endothermic.
The value of enthalpy change ΔH is positive in such reactions showing intake of energy.
EXOTHERMIC REACTION: A chemical reaction is considered exothermic if the energy is released during the reaction. In other words, if the energy is produced as a product of the reaction, then the reaction is exothermic.
The value of enthalpy change ΔH is negative in such reactions showing the release of energy.
Since, the value of ΔH = -125 KJ, is negative for the given reaction.
Therefore, it would be considered as Exothermic Reaction.
According to ohms law, as the voltage increases across a 40 ohm resistor what happens to the current, resistors, and resistance
Answer:
As the voltage increases, the current flowing through the circuit increases while the resistance of the resistor remains constant.
Explanation:
Ohm's law states that the current flowing through a circuit is directly proportional to the applied voltage.
V = IR
where;
I is the current
R is the resistance
V is the applied voltage
Based on this law (Ohm's law), as the voltage increases, the current flowing through the circuit increases while the resistance of the resistor remains constant.
which of the following is a freshwater biome? A.wetland B.estuary C.ocean D.coral reef
Answer:
Wetland
Explanation:
Have a good day!
plz answer fast need your help plz plz plz
Answer:
the vertical component of the force is 43.30 N.
Explanation:
Given;
angle of inclination of the force, θ = 60⁰
magnitude of the force, F = 50 N
The vertical component of the force is calculated as follows;
[tex]F_y = F \times sin(\theta}\\\\F_y = 50 N \times sin(60)\\\\F_y = 50 N \times \frac{\sqrt{3} }{2} \\\\F_y = 25\sqrt{3} \ N\\\\F_y = 43.30 \ N[/tex]
Therefore, the vertical component of the force is 43.30 N.
A car travels at uniform velocity at a distance of 100 m in 4 seconds what is the velocity of the car
Answer:
the answer is 25
Explanation:
because the formula for velocity is distance divided by time.
Give me two examples of a pushing force and two examples of a pulling force:
Answer:
A pushing force example could be a button, like on a keyboard.
Another example would be a piston.
An example of a pulling force could be a lever.
Another example could be rope.
Hope this helps! c:
Focus Question: How are physical properties used to compare and classify substances?
Answer:
Properties that can be determined without changing the composition of a substance are referred to as physical properties. Characteristics such as melting point, boiling point, density, solubility, color, odor, etc. ... Physical and chemical properties can be used to classify a substance as ionic or molecular.
Explanation:
Hope it helps! Correct me if I am wrong!
Dont worry im sure about my answer!
If you dont mind can you please mark me as brainlest?
Its ok if you don't want to!
Choose all that apply about the earths crust
1. thickest layer
2. thinnest layer
3. densest layer
4. least dense layer
5. home to all life
6. home to most life
6. made of hot soft rock
I will give brainliest
A truck skids for a distance of 25m with the road pushing on its tires with force of 1500N as its brakes are applied. What is the change in kinetic energy for the truck?
Answer:
37500 J
Explanation:
Law of conservation of energy: Its states that energy can neither be created nor destroyed but it can be transformed from one form to another.
Applying the law of conservation of energy.
The change in kinetic energy for the truck = Net work done by the truck skids
ΔK.E = F×d.................... Equation 1
Where ΔK.E = Change in kinetic energy, F = Force, d = distant.
Given: F = 1500 N, d = 25 m
Substitute these values into equation 1
ΔK.E = 1500×25
ΔK.E = 37500 J
Un acróbata de masa M, se impulsa hacia arriba con una velocidad v0 desde un
trampolín. Mientras sube, a una altura h sobre el trampolín, recoge a un mono entrenado de masa m. ¿Cuál es la altura máxima que alcanzan el mono y el acróbata?
Answer:
La altura máxima que alcanzan el mono y el acróbata es [tex]z = \frac{1}{2}\cdot \left(\frac{M}{M+m} \right)\cdot v_{o}^{2}+\left(1-\frac{M\cdot g}{M+m} \right)\cdot h[/tex].
Explanation:
Asumamos que tanto el acróbata, el mono y el sistema acróbata-mono son conservativos y que el acróbata comienza su acción a una altura de cero. El estudio se divide en dos etapas: (i) El acróbata se dirige al mono, (ii) El acróbata recoge al mono y alcanzan una altura máxima.
Para resolver esta cuestión, nos valemos del Principio de Conservación de la Energía.
Parte I
La energía cinética traslacional inicial ([tex]K_{1,a}[/tex]) es igual a la suma de la energía cinética traslacional final ([tex]K_{2, a}[/tex]) y la energía potencial gravitacional final ([tex]U_{g,2,a}[/tex]).
[tex]K_{1,a} = K_{2,a} + U_{g,2,a}[/tex] (1)
[tex]\frac{1}{2}\cdot M \cdot v_{o}^{2} = \frac{1}{2}\cdot M\cdot v_{1}^{2} + M\cdot g \cdot h[/tex] (1b)
Donde:
[tex]M[/tex] - Masa del acróbata.
[tex]g[/tex] - Constante gravitacional.
[tex]v_{o}[/tex] - Rapidez inicial del acróbata.
[tex]v_{1}[/tex] - Rapidez del acróbata justo antes de recoger al mono.
[tex]h[/tex] - Altura inicial del mono.
Parte II
La suma de las energías iniciales cinética traslacional ([tex]K_{2, a}[/tex]) y potencial gravitacional de acróbata ([tex]U_{g,2,a}[/tex]) y la energía inicial potencial gravitacional del mono ([tex]U_{g,2,m}[/tex]) es igual a la suma de las energías potenciales gravitacionales iniciales del sistema acróbata-mono ([tex]U_{g,3,a+m}[/tex]), es decir:
[tex]K_{2,a} + U_{g,2,a}+U_{g,2,m} = U_{g,3,a+m}[/tex] (2)
[tex]\frac{1}{2}\cdot M\cdot v_{1}^{2} + (M+m)\cdot g \cdot h = (M+m)\cdot g \cdot z[/tex] (2b)
Donde:
[tex]m[/tex] - Masa del mono.
[tex]z[/tex] - Altura máxima del sistema acróbata-mono.
De (1b) tenemos que la rapidez del acróbata justo antes de recoger al mono es:
[tex]\frac{1}{2}\cdot M \cdot v_{o}^{2} = \frac{1}{2}\cdot M\cdot v_{1}^{2} + M\cdot g \cdot h[/tex]
[tex]v_{o}^{2} = v_{1}^{2}+2\cdot g\cdot h[/tex]
[tex]v_{1} = \sqrt{v_{o}^{2}-2\cdot g\cdot h}[/tex]
Finalmente, la altura máxima alcanzada por el sistema acróbata-mono es:
[tex]\frac{1}{2}\cdot M\cdot v_{1}^{2} + (M+m)\cdot g \cdot h = (M+m)\cdot g \cdot z[/tex]
[tex]z = \frac{M\cdot v_{1}^{2}}{2\cdot (M+m)\cdot g}+h[/tex]
[tex]z = \frac{1}{2}\cdot \left(\frac{M}{M+m} \right)\cdot (v_{o}^{2}-2\cdot g\cdot h)+ h[/tex]
[tex]z = \frac{1}{2}\cdot \left(\frac{M}{M+m} \right)\cdot v_{o}^{2}+\left(1-\frac{M\cdot g}{M+m} \right)\cdot h[/tex]
La altura máxima que alcanzan el mono y el acróbata es [tex]z = \frac{1}{2}\cdot \left(\frac{M}{M+m} \right)\cdot v_{o}^{2}+\left(1-\frac{M\cdot g}{M+m} \right)\cdot h[/tex].
1. Heat energy is also known as
energy.
?
Heat energy is also called thermal energy.
A 450 kilogram motorcycle is moving at a speed of 65 m's how much kinetic energy does the motorcycle have
Explanation:
K.E = 1/2mv²
K.E = 1/2 * 450 *65*65
K.E = 950625J
What is the difference in average speed between two car, one that traveled 150 kilometers in 5 hours and the other that traveled 130 kilometers in the same time?
Answer:
just like he saide you can downloude the answer