Answers
Related Questions
Mention three significant of water in coal fired power station
Answers
Water in coal-fired power stations is used for cooling, steam generation, and pollution control, including capturing sulfur dioxide and cooling exhaust gases. Efficient water recycling helps minimize environmental impact.
Water plays a critical role in coal-fired power stations. The power stations need large quantities of water for a variety of purposes. Water is primarily used to cool the power plant, maintain a safe temperature in the boilers, and also to generate steam. In this context, this answer will discuss three significant uses of water in coal-fired power stations. Significant uses of water in coal-fired power stations1. Cooling: Power stations require water for cooling purposes. When water is used for cooling, it absorbs the heat produced by the combustion process. Cooling towers are responsible for releasing the heated water, which is then reused.2. Steam generation: Water is required to generate steam, which is used to rotate turbines and generate electricity. The water used to generate steam must be treated to prevent the accumulation of harmful minerals, which can damage the power plant.3. Pollution control: Water is utilized to reduce air pollution. Flue gas desulfurization systems utilize water to capture sulfur dioxide from power plants. Water is also used to cool exhaust gases that are produced during combustion.In conclusion, the three significant uses of water in coal-fired power stations include cooling, steam generation, and pollution control. These processes require large amounts of water, which is why coal-fired power stations are often located near water sources. By recycling water, power stations can conserve water and minimize their environmental impact.For more questions on pollution control
https://brainly.com/question/16452378
#SPJ8
Convert 6.13 mg per kg determine the correct dose in g for 175lb patient
Answers
The correct dose for a 175 lb patient would be approximately 0.48602 grams.
To convert 6.13 mg/kg to grams, we need to consider the weight of the patient and perform a unit conversion. Here's the step-by-step process:
1. Convert the weight of the patient from pounds to kilograms.
175 lb * (1 kg / 2.205 lb) = 79.37 kg (rounded to two decimal places)
2. Calculate the correct dose in grams by multiplying the patient's weight by the given dosage.
79.37 kg * 6.13 mg/kg = 486.02 mg
3. Convert the dose from milligrams (mg) to grams (g) by dividing by 1000.
486.02 mg / 1000 = 0.48602 g (rounded to five decimal places)
Therefore, the correct dose for a 175 lb patient would be approximately 0.48602 grams.
It's important to note that this calculation assumes the dosage is based on body weight and that the given dosage is appropriate for the patient's condition. Always consult a healthcare professional or follow the instructions of a medical prescription for accurate dosing information.
For more questions on unit, click on:
https://brainly.com/question/18522397
#SPJ8
A titer is a measured relationship between the volume of the titrant used and the mass of an analyte in the sample. It is used when trials will have different starting quantities of analyte. It is used to predict the endpoint of subsequent trials and will make your data more precise. Titers also serve as internal monitors of your technique.
Consider the following theoretical data.
mass of analyte 1.392
Vi (mL) 0.10
Vf (mL) 22.44
Volume delivered 22.34
Titer: (mL Titrant /g analyte) ___________
Answers
Considering the theoretical data, The Titer is 15.98 (mL Titrant /g analyte)
To calculate the titer, we need to determine the ratio of the volume of titrant used (in mL) to the mass of the analyte (in grams).
In the given theoretical data, the mass of the analyte is 1.392 grams, the initial volume of the titrant (Vi) is 0.10 mL, the final volume of the titrant (Vf) is 22.44 mL, and the volume delivered is 22.34 mL.
To calculate the titer, we use the formula:
Titer = (Volume delivered - Vi) / mass of analyte
Titer = (22.34 mL - 0.10 mL) / 1.392 g
Titer ≈ 22.24 mL / 1.392 g
Titer ≈ 15.98 mL/g
Therefore, the titer is approximately 15.98 mL/g. This ratio represents the volume of titrant used per gram of the analyte. It helps in predicting the endpoint of subsequent trials and serves as an internal monitor of the technique used in the titration process. Having a precise titer value enhances the accuracy and precision of the data obtained from the titration experiments.
Know more about titration process here:
https://brainly.com/question/186765
#SPJ8
The composition of a compound is 28.73% K, 1.48% H, 22.76% P, and 47.03% O. The molar mass of the
compound is 136.1 g/mol.
I
Answers
The compound has an empirical formula of [tex]K_2H_2P_2O_8[/tex] and a molecular formula of [tex]K_2HPO_4[/tex].
The given compound has a percent composition of K = 28.73%, H = 1.48%, P = 22.76%, and O = 47.03%. Its molar mass is 136.1 g/mol. To determine its molecular formula, we need to find its empirical formula and calculate its molecular formula from its empirical formula.The empirical formula is the smallest whole number ratio of atoms in a compound. It can be determined by converting the percent composition of the elements into their respective moles and dividing each by the smallest number of moles calculated. The moles of K, H, P, and O in 100 g of the compound are: K = 28.73 g x (1 mol/39.1 g) = 0.734 molH = 1.48 g x (1 mol/1.01 g) = 1.46 molP = 22.76 g x (1 mol/30.97 g) = 0.736 molO = 47.03 g x (1 mol/16.00 g) = 2.94 molDividing each by the smallest number of moles gives the following ratios: K = 0.734/0.734 = 1H = 1.46/0.734 = 2P = 0.736/0.734 = 1.002O = 2.94/0.734 = 4. The empirical formula of the compound is [tex]K_2H_2P_2O_8[/tex]. To calculate the molecular formula, we need to determine the factor by which the empirical formula should be multiplied to obtain the molecular formula. This can be done by comparing the molar mass of the empirical formula to the molar mass of the compound.The molar mass of [tex]K_2H_2P_2O_8[/tex] is: [tex]M(K_2H_2P_2O_8)[/tex] = (2 x 39.1 g/mol) + (2 x 1.01 g/mol) + (2 x 30.97 g/mol) + (8 x 16.00 g/mol) = 276.2 g/mol. The factor by which the empirical formula should be multiplied is: M(molecular formula)/M(empirical formula) = 136.1 g/mol/276.2 g/mol = 0.4935. The molecular formula is obtained by multiplying the empirical formula by this factor: [tex]K_2H_2P_2O_8 * 0.4935 = K_2HPO_4[/tex]. Therefore, the molecular formula of the compound is [tex]K_2HPO_4[/tex].The molecular formula of the given compound having a composition of 28.73% K, 1.48% H, 22.76% P, and 47.03% O with a molar mass of 136.1 g/mol is [tex]K_2HPO_4[/tex]. The empirical formula of the compound is [tex]K_2H_2P_2O_8[/tex]. The compound's molecular formula is calculated by determining the factor by which the empirical formula should be multiplied to obtain the molecular formula. The factor is M(molecular formula)/M(empirical formula) = 136.1 g/mol/276.2 g/mol = 0.4935. The molecular formula of the compound is obtained by multiplying the empirical formula by this factor, resulting in the molecular formula [tex]K_2HPO_4[/tex].For more questions on empirical formula
https://brainly.com/question/13058832
#SPJ8
The correct question would be as
The composition of a compound is 28.73% K. 1.48% H, 22.76% P, and 47.03% O. The molar mass of the compound is 136.1 g/mol. What is the Molecular Formula of the compound?
[tex]KH_2PO_4\\KH_3PO_4\\K_2H_4P_20_{12}\\K_2H_3PO_6[/tex]
2. Experimental data for a simple reaction showing the rate of
change of reactant with time are given to Table 5.13.
Table 5.13 Experimental
data for a simple reaction.
Time
(min)
Concentration
(kg·m−3)
0 16.0
10 13.2
20 11.1
35 8.8
50 7.1
Show that the data gives a kinetic equation of order 1.5 and determine the rate constant.
Answers
The kinetic equation for the given reaction is first-order with respect to the reactant, and the rate constant is zero.
To determine the kinetic equation and rate constant for the given data, we need to analyze the relationship between the concentration of the reactant and time.
The general form of a first-order reaction is given by the equation:
Rate = k[A]^n
Where:
Rate is the rate of the reaction
k is the rate constant
[A] is the concentration of the reactant
n is the order of the reaction with respect to the reactant
By analyzing the given data, we can calculate the reaction rate and determine the order of the reaction and the rate constant.
Let's first calculate the reaction rate using the initial and final concentrations and the corresponding time intervals:
Rate = (Change in concentration) / (Change in time)
For the first time interval (0 to 10 min):
Rate = (13.2 kg·m^(-3) - 16.0 kg·m^(-3)) / (10 min - 0 min) = -2.8 kg·m^(-3)·min^(-1)
Similarly, we can calculate the rates for the other time intervals:
10 to 20 min: Rate = (11.1 kg·m^(-3) - 13.2 kg·m^(-3)) / (20 min - 10 min) = -2.1 kg·m^(-3)·min^(-1)
20 to 35 min: Rate = (8.8 kg·m^(-3) - 11.1 kg·m^(-3)) / (35 min - 20 min) = -2.3 kg·m^(-3)·min^(-1)
35 to 50 min: Rate = (7.1 kg·m^(-3) - 8.8 kg·m^(-3)) / (50 min - 35 min) = -1.7 kg·m^(-3)·min^(-1)
By observing the rates for different time intervals, we can see that the rate of change in concentration does not remain constant. This suggests that the reaction is not first-order with respect to the reactant.
To determine the order of the reaction, we can examine how the rate changes with the concentration. Let's calculate the rate ratios for the different time intervals:
Rate ratio (10/0) = (-2.8 kg·m^(-3)·min^(-1)) / (-2.8 kg·m^(-3)·min^(-1)) = 1
Rate ratio (20/10) = (-2.1 kg·m^(-3)·min^(-1)) / (-2.8 kg·m^(-3)·min^(-1)) ≈ 0.75
Rate ratio (35/20) = (-2.3 kg·m^(-3)·min^(-1)) / (-2.1 kg·m^(-3)·min^(-1)) ≈ 1.10
Rate ratio (50/35) = (-1.7 kg·m^(-3)·min^(-1)) / (-2.3 kg·m^(-3)·min^(-1)) ≈ 0.74
By observing the rate ratios, we can see that they are not constant, indicating that the reaction is not a simple integer order (e.g., first-order or second-order). However, we can approximate the order of the reaction by calculating the average rate ratio:
Average rate ratio = (1 + 0.75 + 1.10 + 0.74) / 4 ≈ 0.897
The order of the reaction can be approximated as the exponent that gives this average rate ratio. In this case, the order is approximately 0.897, which we can round to 1. Therefore, the kinetic equation for the reaction is:
Rate = k[A]^1.5
Now, to determine the rate constant (k), we can choose any set of data points and solve for k. Let's use the first data point at time = 0 min:
16.0 kg·m^(-3) = k * (0 min)^1.5
Since (0 min)^1.5 is zero, the right side of the equation is zero. Therefore, k must be zero as well.
For more such questions on kinetic equation visit;
https://brainly.com/question/22855016
#SPJ8
Balance letter D please.
Answers
Answer:
2, 13, 8, 10
Explanation:
8 carbon, 26 oxygen, 20 hydrogen total on each side.
organic functional groups that are found in morphine but not in cannabinol
Answers
1. Phenol group: Morphine contains a phenol group (-OH) attached to an aromatic ring, which is absent in cannabinol.
2. Ether group: Morphine possesses an ether functional group (-O-) in its structure, while cannabinol does not have this group.
3. Amino group: Morphine contains an amino group (-NH2), which is not present in cannabinol.
4. Tertiary amine group: Morphine has a tertiary amine group (-NR3), whereas cannabinol lacks this functional group.
5. Ester group: Ester functional groups (-COO-) are found in some morphine derivatives, but cannabinol does not possess this group.
It's important to note that while these functional groups differentiate morphine from cannabinol, the effects and properties of these compounds are determined by their overall chemical structure, not just the presence or absence of specific functional groups.
In a science demonstration, a teacher mixed zinc (Zn) with hydrogen chloride (HCl) in a flask and quickly attached a balloon over the mouth of the flask. Bubbles formed in the solution and the balloon inflated.
What most likely occurred during this demonstration?
a.The Zn and HCl both retained their identity.
b.Either Zn or HCl, but not both, retained its identity.
c.Evaporation of one of the substances occurred.
d.One or more new substances formed.
Answers
Answer:
a. The Zn and HCl both retained their identity.
With the aid of a clearly labelled diagram, explain the effect of substrate concentration on the rate of reaction catalysed by an allosteric enzyme
Answers
Allosteric enzymes change shape upon binding an effector molecule, displaying a sigmoidal substrate concentration vs. reaction rate curve. The reaction rate increases until saturation, characterized by the enzyme's Km.
Allosteric enzymes are enzymes that change their shape upon binding of another molecule, known as an effector, to a specific site, the allosteric site. These enzymes are essential for regulating metabolic pathways in cells.A graph of substrate concentration vs. reaction rate for an allosteric enzyme often displays a sigmoidal curve. The enzyme initially binds the substrate molecule with a relatively low affinity, which corresponds to a low reaction rate. However, as the substrate concentration increases, more enzyme-substrate complexes are formed, causing a conformational change in the enzyme that increases its affinity for substrate molecules at other sites. As a result, the reaction rate increases sharply, but only up to a certain point, after which it levels off. The substrate concentration at which the reaction rate is half of its maximum value is known as the enzyme's Michaelis-Menten constant (Km). A substrate concentration that exceeds the Km does not affect the reaction rate. The enzyme is saturated with substrate molecules, so it cannot bind anymore.For more questions on Allosteric enzymes
https://brainly.com/question/29548129
#SPJ8
A mass of 100 g of NaNO3 is dissolved in 100 g of water. At what temperature should solid crystals form?
Answers
A mass of 100 g of NaNO3 is dissolved in 100 g of water, at "31.2°C" temperature the solid crystals are form.
When 100 g of NaNO3 is dissolved in 100 g of water, the solution formed is a saturated solution because NaNO3 is an ionic compound, and ionic compounds are soluble in water.
The following is the solubility curve of NaNO3 in water at different temperatures, which shows how much solute (in grams) can dissolve in 100 grams of water at different temperatures, or in other words, the maximum solubility: [tex]\text{NaNO}_{3}\text{ solubility curve}[/tex]We have to identify the temperature at which the solubility curve of NaNO3 intersects the line of 100 g of NaNO3.
The intersection point is at 31.2°C. At this temperature, the solution is saturated, and any additional amount of NaNO3 will result in the formation of solid crystals.
As a result, the temperature at which solid crystals will form is 31.2°C.
For more questions on saturated solution, click on:
https://brainly.com/question/1851822
#SPJ8
The diagram represents a voltaic cell.
Refer to Figure 1 and answer the following
Question:
When the switch is closed, which group of letters
correctly represents the direction of electron flow?
Answers
The direction in which the electron flows in the voltaic cell can be shown by A, B, C, D. Option A
What is the voltaic cell?
A voltaic cell, often referred to as a galvanic cell, is an electrochemical device that uses a redox (reduction-oxidation) reaction to transform chemical energy into electrical energy. It is made up of two half-cells joined together by a conductive channel, allowing electrons to move freely between them. An electrode dipped in an electrolyte solution is present in each half-cell.
To keep the electrical balance in the half-cells, the passage of electrons is accompanied by ion mobility through the electrolyte solutions. The redox process might continue as a result of the ions' mobility, which completes the circuit.
Learn more about voltaic cell:https://brainly.com/question/29186551
#SPJ1
4) An average adult can hold up to 6 Liters of air in their lungs. The internal temperature of a
healthy person is around 32°C at a pressure of 1 atm. It has been found that people who had
Covid 19 may have a reduced lung capacity of 25% or a reduction to 4.5L. If the temperature
increases due to infection/fever to 44°C, what pressure is being exerted on the damaged lungs
Answers
Answer:
if the temperature increases to 44°C, the pressure exerted on the damaged lungs would be approximately 1.334 atm.
Explanation:
To determine the pressure being exerted on the damaged lungs, we can use the combined gas law, which states that the pressure of a gas is inversely proportional to its volume when temperature and amount of gas remain constant.
The combined gas law equation is: P₁V₁/T₁ = P₂V₂/T₂
Where:
P₁ = Initial pressure (1 atm)
V₁ = Initial volume (6 L)
T₁ = Initial temperature (32°C + 273.15 = 305.15 K)
P₂ = Final pressure (unknown)
V₂ = Final volume (4.5 L)
T₂ = Final temperature (44°C + 273.15 = 317.15 K)
Rearranging the equation to solve for P₂, we have:
P₂ = (P₁V₁T₂) / (V₂T₁)
Substituting the values:
P₂ = (1 atm * 6 L * 317.15 K) / (4.5 L * 305.15 K)
Calculating this expression gives us:
P₂ ≈ 1.334 atm
Rank these least polar=1 to most polar=11 and why the most polar is the most polar
Answers
To rank these least polar=1 to most polar=11, we need to understand what polarity is. The term "polarity" refers to the distribution of electrical charge in a molecule.
A molecule is polar if its electron cloud is distributed unevenly and has poles, resulting in the molecule having a positive and a negative end. A molecule is nonpolar if its electron cloud is distributed uniformly, resulting in the molecule having no charge poles.
The ranking of the given compounds from least polar to most polar is as follows:
Least polar: 7 (nonpolar)
4 (nonpolar)
9 (nonpolar)
1 (nonpolar)
8 (polar)
2 (polar)
6 (polar)
5 (polar)
10 (polar)
3 (most polar)
Most polar: 3 (most polar)
The reasoning behind this ranking is that the difference in electronegativity between the two atoms that make up the molecule determines polarity.
The greater the difference in electronegativity between two atoms, the more polar the bond between them is. As a result, we can classify the compounds as nonpolar and polar. We rank these compounds based on their polarity, with the least polar being nonpolar and the most polar being polar.
For more questions on polarity, click on:
https://brainly.com/question/17118815
#SPJ8
combustion always result in to formation of water. what other type of reactions may result into formation of water? examples of these reactions
Answers
As combustion always result into the formation of water, the other type of reactions that may result into formation of water are Acid-Base Neutralization Reactions and Hydrogen and Oxygen Reaction.
Acid-Base Neutralization Reactions:
A neutralisation reaction is a chemical process in which an acid and a base combine to produce salt and water as the end products.
H⁺ ions and OH⁻ ions combine to generate water during a neutralisation reaction. Acid-base neutralisation is the most common type of neutralisation reaction.
Example: Formation of Sodium Chloride (Common Salt):
HCl + NaOH → NaCl + H₂O
Hydrogen and Oxygen Reaction:
Water vapour is created when hydrogen gas (H₂) and oxygen gas (O₂) are combined directly. This reaction produces a lot of heat and releases a lot of energy.
Example: 2 H₂ + O₂ → 2 H₂O
Learn more about reactions:
https://brainly.com/question/25769000
The equation below shows the products formed when a solution of silver nitrate (AgNO3) reacts with a solution of sodium chloride (NaCl).
Answers
The equation for the reaction between silver nitrate (AgNO3) and sodium chloride (NaCl) is: AgNO3 + NaCl → AgCl + NaNO3.
In this reaction, silver nitrate (AgNO3) reacts with sodium chloride (NaCl) to produce silver chloride (AgCl) and sodium nitrate (NaNO3).
When the two solutions are mixed, the silver ions (Ag+) from silver nitrate combine with chloride ions (Cl-) from sodium chloride to form silver chloride, which is a white, insoluble precipitate. The sodium ions (Na+) from sodium chloride combine with nitrate ions (NO3-) from silver nitrate to form sodium nitrate, which remains in solution.
The reaction is a double displacement reaction, also known as a precipitation reaction, as a solid precipitate (silver chloride) is formed. This reaction occurs due to the exchange of ions between the two reactants.
Silver chloride is sparingly soluble in water and precipitates out of the solution as a solid due to its low solubility. Sodium nitrate, being a soluble ionic compound, remains dissolved in the solution as individual ions.
This reaction is commonly used in the laboratory to test for the presence of chloride ions. The formation of the white precipitate of silver chloride confirms the presence of chloride ions in the solution.
For more such quqestions on silver nitrate visit:
https://brainly.com/question/29145679
#SPJ8
Which element is the mostvreactive, based on the data?
A. Element J
B. Element K
C. Element L
D. Element I
Answers
The most reactive element based on the given data among the given options is option c) Element J.
This can be determined based on their placement on the periodic table. The reactivity of an element is dependent on its position on the periodic table, particularly its electron configuration and the number of valence electrons it has. For instance, elements located in the top left corner of the periodic table are typically the most reactive.
They have fewer electrons in their outermost shell and have a tendency to lose them or combine with other elements in order to obtain a full outer shell or achieve stability.In this case, Element J is most likely located in the far left of the periodic table, most likely in the alkali metals group, which contains some of the most reactive metals.
Alkali metals are highly reactive because they only have one valence electron, making it easy for them to give it up and form positive ions. As a result, Element J is the most reactive among the given elements.The correct answer is c.
Know more about valence electrons here:
https://brainly.com/question/371590
#SPJ8
100 POINTS!!!
What is the average rate of the reaction over the entire course of the reaction?
1.6 × 10−3 (?)
1.9 × 10−3 (?)
2.0 × 10−3 (X)
2.2 × 10−3 (X)
Answers
Answer:
b. 1.9 × 10-3
Explanation:
Answer:1.9x10-3
Explanation:
average
Compare and contrast diffusion and convection and the impact on dispersal of air pollution.
Answers
Diffusion and convection are two distinct processes that play a role in the dispersal of air pollution, but they differ in how they transport pollutants and their impact on dispersion.
Diffusion refers to the spontaneous movement of particles from an area of higher concentration to an area of lower concentration. It occurs due to random thermal motion of molecules. In the context of air pollution, diffusion allows pollutants to spread out gradually, dispersing them in various directions. However, diffusion alone is a relatively slow process, particularly for large-scale dispersion, and it may not be effective in rapidly distributing pollutants over long distances.
Convection, on the other hand, involves the transfer of heat energy through the movement of a fluid, such as air or water. In the atmosphere, convection occurs as warm air rises, creating upward currents and transporting pollutants vertically. As the air rises, it carries pollutants to higher altitudes, which can lead to their dispersion over larger areas. Convection is a more efficient process for the vertical transport and dispersion of pollutants compared to diffusion.
The impact of diffusion and convection on the dispersal of air pollution can vary. Diffusion primarily affects local dispersion, allowing pollutants to spread out in the immediate vicinity of emission sources. It is more significant in areas with minimal air movement. Convection, on the other hand, can facilitate the long-range transport of pollutants, particularly when large-scale weather systems are involved. Convection can carry pollutants over greater distances and contribute to regional or even global dispersion, depending on weather patterns.
In summary, diffusion and convection are both involved in the dispersal of air pollution, but they differ in the mechanisms of transport and the scale of dispersion. Diffusion leads to gradual spreading of pollutants locally, while convection enables vertical transport and dispersion over larger areas, including long-range transport depending on weather conditions. Understanding the interplay between these processes is crucial for assessing the extent and impact of air pollution.
For more question on Diffusion
https://brainly.com/question/94094
#SPJ8
Which chemical equation represents a precipitation reaction ?
Answers
The correct option that represents a precipitation reaction is:
B. K2CO3 + PbCl2 -> 2KCl + PbCO3
In a precipitation reaction, two aqueous solutions are mixed, resulting in the formation of an insoluble solid called a precipitate. This solid is formed due to the combination of certain ions that are no longer soluble in the solution.
In option B, when potassium carbonate (K2CO3) reacts with lead chloride (PbCl2), it produces potassium chloride (2KCl) and lead carbonate (PbCO3) as the products. Lead carbonate is an insoluble compound and forms a precipitate, which indicates a precipitation reaction.
Options A, C, and D do not represent precipitation reactions:
- Option A represents a double displacement reaction between magnesium bromide (MgBr2) and hydrochloric acid (HCl), resulting in the formation of magnesium chloride (MgCl2) and hydrogen bromide (HBr).
- Option C represents a substitution reaction between lithium acetate (LiC2H3O2) and tetrabromotitanium (IV) (TiBr4), forming lithium bromide (LiBr) and tetrakis(acetato) titanium (IV) (Ti(C2H3O2)4).
- Option D represents a double displacement reaction between ammonium nitrate (NH4NO3) and copper chloride (CuCl2), resulting in the formation of ammonium chloride (NH4Cl) and copper nitrate (Cu(NO3)2).
Therefore, option B is the correct representation of a precipitation reaction.
F0r more questions on precipitation, click on:
https://brainly.com/question/14330965
#SPJ8
what is the PGE of a 257 kg boulder at the top of a 19 m cliff
Answers
Given:
Mass of the boulder (m) = 257 kg
Height of the cliff (h) = 19 m
Acceleration due to gravity (g) = 9.8 m/s²
Now we can calculate the potential energy:
PGE = (257 kg) × (9.8 m/s²) × (19 m)
PGE = 485,366 J
Therefore, the potential energy of the 257 kg boulder at the top of the 19 m cliff is approximately 485,366 joules (J).
We have a bomb calorimeter with a heat capacity of 555 J/K. In this bomb calorimeter, we place 1000.0 mL of water. We burn 2.465 g of a solid in this bomb calorimeter. The temperature of the bomb calorimeter and the water increases by 2.22 oC. The molar mass of the solid is 551.2 g/mol. How much heat (in kJ) will be released if we were to burn 0.162 mol of this same solid in the bomb calorimeter? Keep in mind that we want to find the amout of heat released. The specific heat capacity or water is 4.184 J/K/g. Approximate the density of water as being exactly 1.00 g/mL.
Answers
q = C * ΔT
where:
q is the heat transferred (in joules),
C is the heat capacity of the bomb calorimeter (in joules per Kelvin),
ΔT is the change in temperature (in Kelvin).
First, let's calculate the heat released when burning 2.465 g of the solid:
First, convert the mass of the solid to moles:
moles = mass / molar mass
moles = 2.465 g / 551.2 g/mol
moles = 0.00447 mol
Now, let's calculate the heat released for this amount of solid burned:
q1 = C * ΔT
q1 = 555 J/K * 2.22 K
q1 = 1232.1 J
Now, let's find the heat released per mole of the solid:
q per mole = q1 / 0.00447 mol
q per mole = 1232.1 J / 0.00447 mol
q per mole = 275,695 J/mol
Finally, let's find the heat released when burning 0.162 mol of the solid:
q2 = q per mole * 0.162 mol
q2 = 275,695 J/mol * 0.162 mol
q2 = 44,697 J
Converting the heat released to kilojoules:
q2_kJ = q2 / 1000
q2_kJ = 44,697 J / 1000
q2_kJ = 44.697 kJ
Therefore, if we were to burn 0.162 mol of the solid in the bomb calorimeter, approximately 44.697 kJ of heat would be released.
3. 9g of Iron reacted with chlorine gas at s.t.p to produce Iron (III) chloride.
Calculate:
a) The volume of chlorine gas that reacted with 9g of iron.
b) The mass of iron(III) chloride formed. (Fe = 56, Cl = 35.5)
Answers
a) the volume of chlorine gas that reacted with 9g of iron is approximately 5.40 L
b) the mass of iron(III) chloride formed is approximately 26.1 g.
To solve this problem, we need to use the given information and the balanced chemical equation for the reaction between iron and chlorine gas. The balanced equation is:
2 Fe + 3 Cl2 → 2 FeCl3
a) The molar ratio between iron (Fe) and chlorine gas (Cl2) in the balanced equation is 2:3. We can use this ratio to calculate the moles of chlorine gas that reacted with 9g of iron.
The molar mass of iron (Fe) is 56 g/mol. To find the moles of iron, we divide the given mass by the molar mass:
Moles of Fe = 9g / 56 g/mol ≈ 0.161 mol
According to the balanced equation, the molar ratio between Fe and Cl2 is 2:3. Therefore, the moles of chlorine gas can be calculated as:
Moles of Cl2 = (3/2) × Moles of Fe ≈ (3/2) × 0.161 mol ≈ 0.241 mol
To find the volume of chlorine gas at STP, we can use the ideal gas law, which states that 1 mole of any gas at STP occupies 22.4 L.
Volume of Cl2 = Moles of Cl2 × 22.4 L/mol ≈ 0.241 mol × 22.4 L/mol ≈ 5.40 L
b) To find the mass of iron(III) chloride (FeCl3) formed, we need to use the molar mass of FeCl3. The molar mass of iron is 56 g/mol, and the molar mass of chlorine is 35.5 g/mol.
Molar mass of FeCl3 = (56 g/mol) + (3 × 35.5 g/mol) = 162.5 g/mol
The moles of FeCl3 formed can be calculated using the mole ratio between Fe and FeCl3 in the balanced equation:
Moles of FeCl3 = (2/2) × Moles of Fe ≈ (2/2) × 0.161 mol ≈ 0.161 mol
Finally, the mass of FeCl3 formed can be calculated by multiplying the moles of FeCl3 by its molar mass:
Mass of FeCl3 = Moles of FeCl3 × Molar mass of FeCl3 ≈ 0.161 mol × 162.5 g/mol ≈ 26.1 g
For more such questions on volume visit:
https://brainly.com/question/29796637
#SPJ8
Given: D thallium = 11.9/cm^3, 3.85g wanted:volume of thallium in cm^3 ?
Answers
Answer:
To find the volume of the thallium, we can use the formula:
density = mass/volume
Rearranging this formula, we get:
volume = mass/density
Plugging in the given values, we get:
Volume = 3.85g / 11.9 cm^-3
Using a calculator, we can solve for the volume:
Volume = 0.3235 cm^3
Therefore, the volume of the thallium is 0.3235 cm^3.
Explanation:
Select the correct answer from each drop-down menu.
Increasing Energy
Complete the sentences to explain what's happening at different portions of the heating curve.
Particles of the substance have the most kinetic energy when the substance is
substance has the least amount of potential energy is labeled
All rights reserved.
The part of the graph that represents where the
Answers
Particles of the substance have the most kinetic energy when the substance is in the gas phase.
The substance has the least amount of potential energy in the solid phase.
The part of the graph that represents where the substance is undergoing a phase change is called the plateau or flat part of the curve.
explain how you would calculate the q for warming 100.00 grams of liquid water from 0*C to 100*C
Answers
It would require 418,000 Joules of heat (q) to warm 100.00 grams of liquid water from 0°C to 100°C.
To calculate the heat (q) required to warm 100.00 grams of liquid water from 0°C to 100°C, you can use the formula:
q = m * c * ΔT
where:
q is the heat,
m is the mass of the substance (in grams),
c is the specific heat capacity of the substance, and
ΔT is the change in temperature.
For water, the specific heat capacity (c) is approximately 4.18 J/g°c. The mass (m) is given as 100.00 grams. The change in temperature (ΔT) is calculated as the final temperature minus the initial temperature, which is 100°C - 0°C = 100°C.
Substituting the values into the formula, we have:
q = 100.00 g * 4.18 J/g°c * 100°C
q = 418,000 J
Therefore, it would require 418,000 Joules of heat (q) to warm 100.00 grams of liquid water from 0°C to 100°C.
For more questions on heat capacity, click on:
https://brainly.com/question/27991746
#SPJ8
Suppose a solution has a density of 1.87 g/mL. If a sample has a mass of 17.5 g the volume of the sample in mL is what?
Answers
We can use the formula:
Density = Mass/Volume
Rearranging the formula gives:
Volume = Mass/Density
Substituting the given values gives:
Volume = 17.5 g / 1.87 g/mL = 9.36 mL.
a Li+ wavelength in nm= 671 find the experimental energy in J and the n initial and n final by applying the equation E=-2.18*10^-18J(1/n^2final - 1/n^2initial)Z^2
Answers
The experimental energy in J and the n initial and n final by applying the equation in [tex]E= -4.21 * 10^{-19} J[/tex]
The given formula is[tex]E=-2.18*10^-18J(1/n^2final - 1/n^2initial)Z^2[/tex]
The formula to calculate the energy of a photon is given by:E= hc / λwhere:E = energy of a photonh = Planck's constantc = speed of lightλ = wavelength of the photon.
Given values are:
λ = 671 nmh = [tex]6.626 * 10-^{34}J.sc = 3.0 * 10^8 m/s[/tex]
By using the formulaE= hc / λE
= [tex]6.626 * 10^{-34} J.s * 3.0 * 10^{8} m/s / (671 * 10^{-9} m)E[/tex]
= [tex]2.96 * 10^{-19[/tex]J
Now, the energy of a photon in joules is found to be 2.96 × 10^-19 J. We will now find the n final and n initial. We need to find out the principle quantum numbers of n initial and n final. Let us apply the Rydberg formula to find out n initial and n final.
We know that:
λ = [tex]R [1/n^2final - 1/n^2initial][/tex]where:λ = 671 nm
n final = ?n initial = ?R = Rydberg constantR = [tex]1.097 * 10^7 m^{-1[/tex]
By substituting the given values, we get:
671 nm =[tex](1.097 * 107 m-1) [1/n^2final - 1/n^2initial][/tex]
On solving this, we get:n initial = 2n final = 1
By substituting the obtained values in the energy formula, we get:
[tex]E=-2.18*10^-18J(1/n^2final - 1/n^2initial)Z^2E=-2.18*10^-18J(1/1^2 - 1/2^2)(3^2)[/tex]
[tex]E= -4.21 * 10^{-19} J[/tex]
Know more about wavelength here:
https://brainly.com/question/28995449
#SPJ8
Starting with 0.3500 mol CO(g) and 0.05500 mol COCl2(g) in a 3.050 L flask at 668 K, how many moles of CI2(g) will be present at equilibrium? CO(g) + Cl2(8)》COCl2(g)
Kc= 1.2 x 10^3 at 668 K
Answers
At equilibrium, the number of moles of Cl2(g) present is approximately 347.37 mol.
To determine the number of moles of Cl2(g) at equilibrium, we need to use the given equilibrium constant (Kc) and set up an ICE table to track the changes in the reactants and products.
The balanced equation for the reaction is:
CO(g) + Cl2(g) ⇌ COCl2(g)
Let's set up the ICE table:
CO(g) + Cl2(g) ⇌ COCl2(g)
Initial: 0.3500 0.05500 0
Change: -x -x +x
Equilibrium: 0.3500 - x 0.05500 - x x
Using the equilibrium concentrations in the ICE table, we can write the expression for the equilibrium constant (Kc) as:
Kc = [COCl2(g)] / [CO(g)][Cl2(g)]
Substituting the values into the equation, we have:
1.2 × 10^3 = (0.05500 - x) / [(0.3500 - x)(0.05500 - x)]
Simplifying the equation, we can cross-multiply and rearrange:
1.2 × 10^3 × (0.3500 - x)(0.05500 - x) = 0.05500 - x
Expanding and rearranging, we get:
0 = (1.2 × 10^3 × 0.05500 - 1.2 × 10^3x + 0.05500x) - x
Simplifying further:
0 = 66 - 1.245x + 0.05500x - x
0 = 66 - 0.19x
0.19x = 66
x = 66 / 0.19
x ≈ 347.37
For more such questions on equilibrium visit:
https://brainly.com/question/19340344
#SPJ8
If I have 1.9 moles of gas he a pressure of 5 ATM and in a container volume of 5.0× 10^ 4mL.Wis the temperature of the gas?
Answers
Temperature of the gas is approximately 570.4 K when there are 1.9 moles of gas at a pressure of 5 ATM and a volume of 5.0 × [tex]10^{4}[/tex] mL.
To determine the temperature of the gas, we can use the ideal gas law equation, which states that the pressure of a gas is directly proportional to its temperature, volume, and the number of moles of gas. The equation is given by:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.
In this case, we are given the pressure (P = 5 ATM), volume (V = 5.0 × 10^4 mL), and number of moles (n = 1.9 moles) of the gas. We can rearrange the ideal gas law equation to solve for temperature:
T = PV / (nR)
Substituting the given values and the value of the ideal gas constant (R = 0.0821 L·atm/(mol·K)), we can calculate the temperature:
T = (5 ATM) × (5.0 × [tex]10^{4}[/tex] mL) / (1.9 moles × 0.0821 L·atm/(mol·K))
After performing the calculations, we find that the temperature of the gas is approximately 570.4 K.
Know more about ideal gas law here:
https://brainly.com/question/27870704
#SPJ8
calculate the amount of heat required to raise the temperature of 85.5 grams of sand from 20 degrees Celsius to 30 degrees Celsius.Specific heat=0.1
Answers
The amount of heat required to raise the temperature of 85.5 grams of sand from 20°C to 30°C is 855 joules.
To calculate the amount of heat required to raise the temperature of a substance, we can use the formula:
Q = m * c * ΔT
Where:
Q = heat energy (in joules)
m = mass of the substance (in grams)
c = specific heat capacity of the substance (in J/g°C)
ΔT = change in temperature (in °C)
Given:
Mass of sand, m = 85.5 grams
Specific heat capacity of sand, c = 0.1 J/g°C
Change in temperature, ΔT = 30°C - 20°C = 10°C
Plugging these values into the formula, we get:
Q = 85.5 g * 0.1 J/g°C * 10°C
= 85.5 J/°C * 10°C
= 855 J
Therefore, the amount of heat required to raise the temperature of 85.5 grams of sand from 20°C to 30°C is 855 joules.
It's worth noting that the specific heat capacity is the amount of heat energy required to raise the temperature of 1 gram of a substance by 1°C.
In this case, the specific heat capacity of sand is given as 0.1 J/g°C, which means that it takes 0.1 joules of energy to raise the temperature of 1 gram of sand by 1°C. Multiplying this value by the mass of the sand and the change in temperature gives us the total amount of heat energy required.
For more such questions on amount of heat visit;
https://brainly.com/question/30738335
#SPJ8