PLS HELP!!!!

The potential energy of the reactants is about
100 kJ
40 kJ
20 kJ
60 kJ

Answer:

7.01 hope this is right !

Explanation:

This problem can be summarized thusly:

qlost by copper = qgained by water + qgained by calorimeter

2) Therefore:

(610. g) (95.3 °C − x) (0.387 J g¯1 K¯1) = (45.0 g) (x − 36.5 °C) (4.184 J g¯1 °C¯1) + [(10.0 J/K) (x − 36.5 °C)]

Comment: The K and the °C cancel because the °C in this problem is a temperature difference (not one single specific value) and the "size" of one K = one °C.

22497.471 − 236.07x = 198.28x − 7237.22

424.35x = 29734.691

x = 70.1 °C

Answer:

wavelengths

Explanation:

hope it helps

thanks

Wavelengths are being recorded by the machine by using IR spectrography. Therefore, option B is correct.

Infrared (IR) spectroscopy is also known as infrared spectrometry. It is a technique that is used to analyze and identify chemical compounds based on their absorption or emission of infrared radiation.

Infrared radiation lies in the electromagnetic spectrum between visible light and microwave radiation. It has longer wavelengths and lower frequencies than visible light. When infrared radiation passes through a sample, certain chemical bonds in the sample absorb specific frequencies of infrared light.

Learn more about spectrography, here:

https://brainly.com/question/30917323

#SPJ2

The gas in a 250.0 mL piston experiences a change in pressure from 1.00 atm to 4.90 atm. 56.2 ml is the new volume (in mL) assuming the moles of gas and temperature are held constant.

Boyle's law states that at a given temperature, the volume of a gas and its pressure are inversely proportional.

Robert A. Boyle discovered the law in 1662, which states that at a constant temperature, the volume of a gas is inversely proportional to the pressure exerted by the gas.

Given:

Initial volume (V₁) = 250 mL

Initial pressure (P₁) = 1.00 atm

Final volume (V₂) = ?

Final pressure (P₂) = 4.45 atm

Assuming the gas has an ideal behavior, we can find the final volume by using Boyle's law as follows:

P₁ × V₁ = P₂ × V₂

V₂ = P₁ × V₁/P₂

V₂ = 1.00 atm × 250 mL / 4.45 atm

V₂ = 56.2 ml

Thus, 56.2 ml  is the new volume (in mL) assuming the moles of gas and temperature are held constant.

To learn more about the Boyle's law, follow the link;

https://brainly.com/question/30367067

#SPJ1

The substance that he will have the most will be sodium chloride.

More than 70% of the surface of the Earth is covered by seawater, the liquid that makes up the oceans and seas. 96.5 percent of seawater is made up of pure water, 2.5 percent salt, and minor amounts of dissolved inorganic and organic compounds, particles, and a few atmospheric gases.

When a chemist analyzes the composition of a sample and heats it to cause the water to evaporate, he is left with the solid substances that had been dissolved in the sample. Sodium chloride is the most significant salt that is created by ocean water. He next goes through a series of steps to separate the solid materials from one another. The highest substance found in ocean water, according to his measurements, is salt, specifically sodium chloride.

Learn more about sodium chloride

brainly.com/question/9811771

#SPJ4

In the modern periodic table, reactivity increases when moving from left to right in the third period because metallic character decreases along a period.

The elements in the modern periodic table are arranged in  7 periods and 18 groups in a certain manner such that along a period , the metallic character of the element decreases and non-metallic character increases while on moving from top to bottom in a group, the metallic character increases and non-metallic character decreases.

The metallic character of elements depends upon its ability to lose electrons. Along a group, the size of atom increases and gradually the nuclear pull decreases so they can readily lose electrons but across a period, atomic size decreases and nuclear pull increases so they cannot lose electrons easily.

To know more about reactivity of elements here

https://brainly.com/question/22081633

#SPJ4

Answer:

69%

Explanation:

Percent yield = ?

Theoretical yield = 985 grams

Experimental Yield = 680 grams

Percent Yield = Experimental Yield / Theoretical Yield * 100

Percent Yield = 680 / 985  * 1 00

Percent Yield = 0.690 * 100 = 69%

The amount of heat released when 75 g of CH4O reacts is -1705.64 kJ.

The equation given is the balanced equation for the combustion of methanol (CH4O) with oxygen to form carbon dioxide (CO2) and water (H20). The value of ΔΗ given (-726 kJ) is the enthalpy change for the reaction, which represents the amount of heat released or absorbed when the reaction occurs.

To calculate the amount of heat released when 75 g of CH4O reacts, we need to use the equation: q = n x ΔΗ where,

We know that the molar mass of CH4O is 32.04 g/mol, so we can convert 75 g to moles using the following formula: n = m/M where,

So, n = 75 / 32.04 = 2.34 moles

Using this value of n in the equation above, we can calculate the heat released as q = 2.34 x -726 = -1705.64 kJ

Therefore, -1705.64 kJ of heat is released when 75 g of CH4O reacts.

Learn more about Enthalpy here:

https://brainly.com/question/16985375

#SPJ4

Answer:

Explanation:

25%

There is 2.43 mg of ascorbic acid in the 5.00-mL sample, or 48.6 mg/100 mL of orange juice.

Explanation:

For i2+na2s2o3 titration,

I2 + 2 S2O3^-2 <--> 2 I^-1 + S4O6^-2

13.82 mL of 0.07203 M Na2S2O3 was needed to reach the starch indicator end point.

Number of moles of Na2S2O3 = 13.82*0.07203= 0.9954546 millimoles.

So, number of moles of excess I2 = 0.9954546/2 = 0.4977273 millimoles.

For oxidizing the ascorbic acid to dehydroascorbic acid

C6H8O6 + I2 --> C6H6O6 + 2 H+ + 2 I-

SO 1mole of I2 read for 1 mole of C6H8O6.

Initial I2 used = 50*0.01023 = 0.5115 millimoles.

Number of moles of I2 used = 0.5115 - 0.4977273 = 0.0137727 millimoles.

Number of moles of C6H8O6 in5 ml of orange juice = 0.0137727 millimoles.

Weight of C6H8O6 in5 ml of orange juice = number of moles * molecular weight = 0.0137727 * 176 = 2.4239952 mg

In 100 ml of orange juice = 2.4239952/5) *100 = 48.479904 milligrams per 100 mL. is the answer.

To learn more about ascorbic acid visit;

https://brainly.com/question/14793819

#SPJ4

It would be due to the scientific method

Hope this helps :)

Answer:

The answer Is c. mole fraction of ethanol in water=0.50

Explanation:

The process of forcing liquid at high pressure into rocks, deep holes in the ground, etc. in order to force open existing cracks and take out oil or gas.

ANSWER :-

❥Fracking..!!!

Fracking is the process of drilling down into the earth before a high-pressure water mixture is directed at the rock to release the gas inside.

Hope it helps ya!❤

Answer:

the third one is the one that you should pick

Answer:

Explanation:

A. Periodic table is beautifully arranged to place elements with similar chemical properties together. A family or a group is a vertical column in periodic table that has elements with similar property.

B. They all have similar properties because they all have the same number of valence electrons that determine the chemical properties such as reactivity of the element.

C. Lithium, sodium, potassium all fall in group 1 called alkali metals and these elements all share the property of being some of the most reactive elements.

D.) endothermic reaction

Answer:

Option A, light energy from the sun

Explanation:

In the process of photosynthesis, the energy from sun in the form of light and heat is taken to undergo glycolysis and prepare glucose/starch (chemical).  

Thus, the light and heat energy of sun is converted into the chemical energy.  

Option B and C are incorrect because no kinetic energy or chemical energy is taken from any source.  

Option D is also incorrect because heat is taken but it is not taken from the surrounding environment. The source of heat energy is sun.  

Thus, only option A is correct

The molarity of KOH solution  will be 0.75 M.

The amount of moles of solute per liter of solution is known as molarity (M). Molarity is defined as moles of solute per liter of solution. To ascertain the concentration of an identified analyte, titration is a typical laboratory technique for quantitative chemical analysis. A standard solution with a known concentration and volume is prepared as the reagent, also known as the titrant or titrator.

The balanced equation is

[tex]H_{2} SO_{4}[/tex]+ 2KOH = [tex]2H_{2} O[/tex]+  [tex]K_{2} SO_{4}[/tex]

2.50 x [tex]10^{-2}[/tex] M= [tex]\frac{x}{0.2 L}[/tex]

So, 0.75 M KOH.

So, The molarity of KOH solution  will be 0.75 M.

Learn more about Molarity

brainly.com/question/13601876

#SPJ4

Answer:

PROPYL ETHANOATE (OR PROPYL ACETATE)

Explanation:

1st step: Identify the functional group of the compound.

             COO is present, hence it is an ester.

2nd step: Split up the compound into CH3COOH and CH3CH2CH2OH.

                 Comes from ethanoic acid and propanol

3rd step: Join the names of the alcohol and the carboxylic acid together.

               Hence, propyl ethanoate.

When a hydrogen atom is part of a molecular structure, it is always a terminal atom.

On the periodic table, hydrogen belongs to the group 1 element. Consequently, a hydrogen molecule contains two valence electrons. There are two identical atoms in the H2 molecule. As a result, any atom can be regarded as a centre atom. An atom attached to a central atom is referred to as a terminal atom if it is not H. Here are two illustrations of this differentiation. Add bonding electrons to the total number of electrons. The end of hydrogen will never come. The centre will often contain the least electronegative element. Since hydrogen can only have two electrons in its valence shell and hence can only make one bond, it can never be the centre atom.

To learn more about atoms click here https://brainly.com/question/1566330

#SPJ4

Two covalent bonds are formed by oxygen to complete their octet.

An electron exchange that results in the formation of electron pairs between atoms is known as a covalent bond. Bonding pairs or sharing pairs are the names given to these electron pairs. Covalent bonding is the stable equilibrium of the attractive and repulsive forces between atoms when they share electrons.

In chemistry, an octet is an arrangement of eight electrons in the outer electron shell of a noble gas atom. The relative inertness of noble gases and the chemical behaviour of several other elements are attributed to this structure.

The chemical element oxygen has an atomic number of 8. (it has eight protons in its nucleus). At normal temperatures and pressures, oxygen transforms into the chemical compound (O2) of two atoms, which is a colourless gas.

To know more about the covalent bond, check out:

https://brainly.com/question/3447218

#SPJ1

a) The change in concentration of each reactant and product as a function of reaction rate is − Δ[H₂]/Δt = -Δ[I₂]/Δt = +1/2Δ[HI]/Δt.

b) The rate as to how fast is [HI] decreasing is 4 mol/[tex]L^{-s}[/tex].

A chemical reaction is the process by which a single or more reactants change into a single or more new products. Chemical building blocks or compounds make up substances.

Given balance chemical reaction,

H₂(g) + I₂(g) → 2HI(g)

a) The rate of reaction in terms of the change in concentration of each reactants & products is

Rate = − Δ[H₂]/Δt = -Δ[I₂]/Δt = +1/2Δ[HI]/Δt

b)  where 2, 1, 1 and stoichiometric coefficients of HI, H₂ and I₂ respectively.

where - sign indicates consumption and + ve sign indicates formation

given d[I₂]/dt =2

-d[HI]/2dt= 2

-d[HI]/dt = 4 mol/[tex]L^{-s}[/tex].

To know more about chemical reaction visit:

https://brainly.com/question/29039149

#SPJ4

Answer:

C2H5OH + 3O2 → 2CO2 + 3H2O

Explanation:

Answer:

180 g

Explanation:

Answer:

it can predict the properties of new elements, because it organizes the elements according to their atomic numbers.

Creating new elements is not a simple process. Scientists use a particle accelerator to smash light atoms into a thin metallic foil that contains heavier atoms. They hope that the two nuclei at the centre of these atoms will fuse and form a heavier nucleus.

When these heavy elements form, they are usually highly unstable. They decay so quickly that we don’t usually see the element itself. Instead, we see a decay product. In that respect, even new elements aren't always 'discovered' directly. In some cases, scientists haven’t synthesized enough of the element for us to know what the element even looks like! Nevertheless, we consider the elements as known. We name them and list them the periodic table.

For example, in 2003, scientists first observed element 115 (ununpentium, Uup) They bombarded americium-243 with calcium-248 ions and produced four atoms of Uup, which lived for less than one fifth of a second.

₂₀ ⁴⁸Ca + ₉₅²⁴³Am → ₁₁₅²⁸⁸Uup + 3 ₀¹n

It took until September 2013 for the discovery to be confirmed, and about 50 atoms have been synthesized to date.

We can predict the properties of Uup because the Periodic Table organizes elements according to their atomic number.

An absolutely interesting occurrence is light. Despite the fact that it is well recognized that light is an electromagnetic, it is frequently more practical to characterise or characterize light in other ways than only as a wave.

For instance, light is frequently depicted as anything other than a wave in spectroscopy and fundamental physics.

Similar to how we replicate oceans moving through water, the Wave Model illustrates how light propagates. Colors can be explained using the Wave Model by including information about wavelength.

The Light Wave Model. Similar to how we simulate ocean waves moving across water, the Wave Model illustrates how light propagates. We can explain qualities of light by imagining it to be an oscillating wave.

To know more about Light click here

brainly.com/question/15200315

#SPJ4

Answer:

64.2 L

Explanation:

In order to be able to calculate the volume of oxygen gas produced by this reaction, you need to know the conditions for pressure and temperature.

Since no mention of those conditions was made, I'll assume that the reaction takes place at STP, Standard Temperature and Pressure.

STP conditions are defined as a pressure of

100 kPa

and a temperature of

0

∘

C

. Under these conditions for pressure and temperature, one mole of any ideal gas occupies

22.7 L

- this is known as the molar volume of a gas at STP.

So, in order to find the volume of oxygen gas at STP, you need to know how many moles of oxygen are produced by this reaction.

Answer:

Hydroxy(oxo)bismuthine oxide