Pls help I am stuck Tysm

Pls Help I Am Stuck Tysm

Answers

Answer 1

Answer:

16cm

Step-by-step explanation:

perimeter for C is 44cm

perimeter for A and B 60cm

60cm-44cm=16cm

Hope this helps


Related Questions

Triangle 1 undergoes four different transformations. The results of these transformations are shown. Which statement best describes one of these transformations?

Answers

One of the transformations undergone by Triangle 1 is a rotation, which involves turning the triangle around a fixed point while preserving its shape and size.

A rotation is a transformation that turns an object around a fixed point, known as the center of rotation. In the given results, if the triangle appears in a different orientation but retains its shape and size, it indicates a rotation.

During a rotation, each point of the triangle is moved along a circular path around the center of rotation. The distance from the center of rotation remains constant, and the angle between any two corresponding points on the original and rotated triangles is preserved. The direction of rotation can be clockwise or counterclockwise, depending on the given results.

To describe a rotation, we need to specify the angle of rotation and the direction. For example, "Triangle 1 underwent a counterclockwise rotation of 90 degrees" would indicate that the triangle was rotated by 90 degrees in the counterclockwise direction.

The specific rotation can be described by stating the angle of rotation and the direction.

For more such questions on triangle

https://brainly.com/question/17335144

#SPJ8

True or false: f(x) is a function.
0
3
6
9

f(x)
0
1
3

Answers

Answer:

Step-by-step explanation:

If {0, 3, 6, 9} are are your x's or domain  or input and there are no repeats, then yes TRUE it is a function.

Snow Fall (Inches)
2.75
2.5
2.25
2
1.75
1.5
1.25
1
0.75
0.5
0.25
0
4
O A. 1.25
OB. 0.75
O C. 2.5
O D. 1.5

1
2
3
4
Time (hours after Midnight)
5
12. The graph above depicts the amount of snow accumulation from midnight to 5:00 a.m. The x-axis represents time (hours after midnight), and the y-axis represents the number of
inches of snow on the ground. How many inches of snow accumulated between 2:00 a.m. and 5:00 a.m.?

Answers

The amount of snow accumulated between 2 am and 5 am is: 1.25 inches

How to Interpret Linear Equation Graphs?

The general formula for the equation of a line in slope intercept form is:

y = mx + c

where:

m is slope

c is y-intercept

From the given graph attached, we see that the y-axis gives the amount of snow at different specific times.

Meanwhile the x-axis gives the time in hours after midnight

At 2am, the y-axis value is 1.25 inches, and as such at 2am snow accumulation was 1.25 inches.

At 5 am, the y-axis value reads 2.5 inches, and as such at 5am snow accumulation was 2.5 inches.

The difference in both snow accumulations is:  2.5 - 1.25 = 1.25

Hence, 1.25 inches snow accumulated between 2 am and 5 am.

Read more about Linear Equation Graphs at: https://brainly.com/question/28732353

#SPJ1

Evaluate the algebraic expression for the given values of the variables

Answers

Answer: substitute the given number for the variable in the expression and then simplify the expression using the order of operations

Step-by-step explanation:3a2 - 4b2 for a = -3/4 and b = 1/2

A corporation donates a valuable painting from its private collection to an art museum. Which of the following are incremental cash flows associated with the donation?

Answers

Incremental cash flows associated with the donation of a valuable painting from a corporation's private collection may include It's important to note that any direct costs associated with the donation.

Tax benefits: The corporation may be eligible for tax deductions or credits for charitable donations, which could result in a reduction in its tax liability and generate cash flow savings.

Opportunity cost: If the corporation could have sold the painting instead of donating it, the incremental cash flow would be the potential proceeds from the sale.

Storage and maintenance cost savings: By donating the painting to the art museum, the corporation no longer has to incur expenses for storing, insuring, and maintaining the artwork, resulting in cost savings.

Public relations and marketing benefits: Donating the painting can enhance the corporation's reputation and generate positive publicity, potentially leading to increased customer goodwill and brand value, which can translate into future cash flows.

For more such questions on Incremental

https://brainly.com/question/25811981

#SPJ8

Solve the problem. Use what you learned from the example.
Use the information
in the tree diagram.
Write a statement that
is always true about
obtuse triangles. Write
a statement that is
sometimes true about
obtuse triangles.
Show your work. Use pictures and words to explain.
Acute
Equilateral
Triangles
Right
Isosceles
Obtuse
Scalene
C

Answers

Statement that is always true about obtuse triangles:

An obtuse triangle always has one angle that measures more than 90 degrees.

In the given tree diagram, the "Obtuse" category represents triangles with at least one obtuse angle.

An obtuse angle is an angle that measures more than 90 degrees. Since an obtuse triangle is defined as having one obtuse angle, it will always have an angle that measures more than 90 degrees.

Therefore, the statement that an obtuse triangle always has one angle that measures more than 90 degrees is always true.

Statement that is sometimes true about obtuse triangles:

An obtuse triangle can have different side lengths.

In the given tree diagram, the "Obtuse" category represents triangles with at least one obtuse angle.

The "Scalene" category represents triangles with different side lengths. Therefore, it is possible for an obtuse triangle to have different side lengths, making the statement "An obtuse triangle can have different side lengths" sometimes true.

However, it is also possible for an obtuse triangle to have two or more sides with the same length, which would make it an isosceles or equilateral triangle.

Hence, the statement is only sometimes true and not always true.

In summary, an always true statement about obtuse triangles is that they always have one angle that measures more than 90 degrees.

A sometimes true statement about obtuse triangles is that they can have different side lengths.

For similar question on triangle.

https://brainly.com/question/25215131

#SPJ8

please help i’m confused

Answers

The regression equation is y = 17.1643X - 2.47977

What is the equation of regression?

To solve this problem, we have to calculate the equation of regression.

Sum of X = 2.97

Sum of Y = 28.66

Mean X = 0.33

Mean Y = 3.1844

Sum of squares (SSX) = 0.3552

Sum of products (SP) = 6.0959

Regression Equation = y = bX + a

b = SP/SSX = 6.1/0.36 = 17.1643

a = MY - bMX = 3.18 - (17.16*0.33) = -2.47977

y = 17.1643X - 2.47977

The line of best fit is y = 17.1643X - 2.47977

Learn more on equation of regression here;

https://brainly.com/question/1564293

#SPJ1

If a pound of rolled oats costs $4
, how many ounces can be bought for $1.95
?

Answers

Answer:

7.80 ounces can be bought for $1.95

Step-by-step explanation:

Step 1:  Determine how many ounces is in a pound:

Because we want our final answer to be in ounces, we first need to determine how many ounces is in a pound.  1 pound is equal to 16 ounces.  

Thus, 16 ounces cost $4.

Step 2:  Create a proportion to determine how many ounces can be bought for $1.95.

Since you can get 16 ounces for $4, we can create a proportion to determine how many ounces can be bought for $1.95:

16 ounces / $4 = x ounces / $1.95

Step 3:  Simplify on the left-hand side of the equation:

16/4 = x/1.95

4 = x/1.95

Step 4: multiply both sides by 1.95 to determine how many ounces can be bought for $1.95:

(4 = x/1.95) * 1.95

7.80 = x

Thus, 7.80 ounces can be bought for $1.95.

Joint probability of two statistical dependent events Y and Z can be written as P(Y and Z) =


Select one:
a. P(Y) * P(Z|Y) + P(Z)
b. P(Y) * P(Z|Y) - P(Z + Y)
c. P(Z + Y) * P(Y|Z)
d. P(Z - Y) * P(Y|Z)
e. P(Y) * P(Z|Y)





Note: Answer B is NOT the correct answer. Please find the correct answer. Any answer without justification will be rejected automatically.

Answers

The correct representation for the joint probability of two dependent events Y and Z is P(Y) * P(Z|Y). Option E

The joint probability of two dependent events Y and Z can be written as the probability of Y occurring multiplied by the conditional probability of Z given Y. This can be represented as P(Y) * P(Z|Y).

Here's the justification:

P(Y) represents the probability of event Y occurring independently.

P(Z|Y) represents the conditional probability of event Z occurring given that event Y has already occurred.

When Y and Z are dependent events, the occurrence of Y affects the probability of Z happening. Therefore, we need to consider the probability of Y occurring first (P(Y)) and then the probability of Z occurring given that Y has already occurred (P(Z|Y)).

Multiplying these two probabilities together gives us the joint probability of both Y and Z occurring simultaneously, which is denoted as P(Y and Z).

Hence, the correct representation for the joint probability of two dependent events Y and Z is P(Y) * P(Z|Y). Option E.

For more such questions on Joint probability

https://brainly.com/question/15109814

#SPJ8

6, 12, 24, 48, 96, … Each term is 6 more than the previous term. Each term is 12 more than the previous term. Each term is 1/2 the previous term. Each term is 2 times the previous term.

Answers

The given sequence can be generated by multiplying each term by 2, starting from the initial term of 6.

The pattern that fits the given sequence 6, 12, 24, 48, 96, ... is that each term is 2 times the previous term.

In the sequence 6, 12, 24, 48, 96, ... there are multiple possible patterns, each resulting from a different rule applied to generate the next term. Let's examine each of the proposed patterns:

Each term is 6 more than the previous term:

Starting with 6, if we add 6 to each term, we get:

6 + 6 = 12

12 + 6 = 18

18 + 6 = 24

24 + 6 = 30

30 + 6 = 36

...

This pattern does not match the given sequence since it does not produce the subsequent terms.

Each term is 12 more than the previous term:

Starting with 6, if we add 12 to each term, we get:

6 + 12 = 18

18 + 12 = 30

30 + 12 = 42

42 + 12 = 54

54 + 12 = 66

...

This pattern also does not match the given sequence.

Each term is 1/2 the previous term:

Starting with 6, if we multiply each term by 1/2, we get:

6 [tex]\times[/tex] 1/2 = 3

3 [tex]\times[/tex] 1/2 = 1.5

1.5 [tex]\times[/tex] 1/2 = 0.75

0.75 [tex]\times[/tex] 1/2 = 0.375

0.375 [tex]\times[/tex] 1/2 = 0.1875

...

This pattern does not match the given sequence.

Each term is 2 times the previous term:

Starting with 6, if we multiply each term by 2, we get:

6 [tex]\times[/tex] 2 = 12

12 [tex]\times[/tex] 2 = 24

24 [tex]\times[/tex]2 = 48

48 [tex]\times[/tex]2 = 96

96 [tex]\times[/tex]2 = 192

This pattern perfectly matches the given sequence. Each term is indeed 2 times the previous term, resulting in the next term.

For similar question on sequence.

https://brainly.com/question/28354530

#SPJ8  

A sample consists of the following N = 7 scores: 5, 0, 4, 5, 1, 2 and 4.
a. Compute the mean and standard deviation for the sample
Mean =

Standard deviation=

b. Find the z-score for each score in the sample

X= 5, z=
X= 0, z=
X= 4, z=
X= 5, z=
X= 1, z=
X= 2, z=
X= 4, z=

Answers

a. Mean = 3

Standard deviation = 2

b. The z-scores for each score in the sample are: 1, -1.5, 0.5, 1, -1, -0.5, 0.5.

a. To compute the mean and standard deviation for the sample, we follow these steps:

Calculate the mean (average)

Mean = (sum of all scores) / (number of scores)

Mean = (5 + 0 + 4 + 5 + 1 + 2 + 4) / 7

Mean = 21 / 7

Mean = 3

The mean of the sample is 3.

Calculate the standard deviation

The formula for standard deviation for a sample is given by:

Standard deviation = sqrt((sum of squared differences from the mean) / (number of scores - 1))

First, calculate the squared differences from the mean for each score:

(5 - 3)^2 = 4

(0 - 3)^2 = 9

(4 - 3)^2 = 1

(5 - 3)^2 = 4

(1 - 3)^2 = 4

(2 - 3)^2 = 1

(4 - 3)^2 = 1

Next, sum up these squared differences:

4 + 9 + 1 + 4 + 4 + 1 + 1 = 24

Now, divide this sum by (number of scores - 1):

24 / (7 - 1) = 24 / 6 = 4

Finally, take the square root of this result:

Standard deviation = sqrt(4) = 2

The standard deviation of the sample is 2.

b. To find the z-score for each score in the sample, we use the formula:

z = (X - Mean) / Standard deviation

For each score, we substitute the values into the formula:

X = 5, z = (5 - 3) / 2 = 2 / 2 = 1

X = 0, z = (0 - 3) / 2 = -3 / 2 = -1.5

X = 4, z = (4 - 3) / 2 = 1 / 2 = 0.5

X = 5, z = (5 - 3) / 2 = 2 / 2 = 1

X = 1, z = (1 - 3) / 2 = -2 / 2 = -1

X = 2, z = (2 - 3) / 2 = -1 / 2 = -0.5

X = 4, z = (4 - 3) / 2 = 1 / 2 = 0.5

The z-scores for each score in the sample are:

z = 1, z = -1.5, z = 0.5, z = 1, z = -1, z = -0.5, z = 0.5

for such more question on Mean

https://brainly.com/question/14532771

#SPJ8

-5 -4 -3 -2 -1 4 3 C -1 O 10 -2- -4 -3- -5- 1 2010. © 2023 Edmentum. All rights reserved. 2 3 4 5 If function f is the parent exponential function f(x) Replace the value of a to complete the equation. = TO X e, what is the equation of transformed function g in terms of function f R S 9 sin cos tan sin cos tan-¹ /A

Answers

Given the equation f(x) = a · bx where a and b are constants. So, the answer to the given problem is g(x) = a · bx + h, and the explanation of the trigonometric function.

To find the equation of transformed function g in terms of function f is explained below: If f(x) = a · bx, then the transformed function g(x) can be represented by g(x) = a · bx + h, where h is the vertical shift (if h > 0, the graph shifts upward, and if h < 0, the graph shifts downward).

Now, we have to replace the value of 'a' to complete the equation of g(x). But, we don't have any value of 'a' provided in the question. Hence, we can't determine the equation of transformed function g in terms of function f for the given information.

Next, let's move to the trigonometric function. It is given that: R S 9 sin cos tan sin cos tan-¹ /ASin, Cos, Tan, Cosec, Sec, and Cot are six trigonometric functions. Let's see their definitions and their corresponding inverse functions:

1. Sine: It is defined as the ratio of the length of the side opposite the given angle to the length of the hypotenuse in a right-angled triangle. Its corresponding inverse function is sin⁻¹.

2. Cosine: It is defined as the ratio of the length of the adjacent side to the length of the hypotenuse in a right-angled triangle. Its corresponding inverse function is cos⁻¹.

3. Tangent: It is defined as the ratio of the length of the side opposite the given angle to the length of the adjacent side in a right-angled triangle. Its corresponding inverse function is tan⁻¹.

4. Cosecant: It is defined as the ratio of the length of the hypotenuse to the length of the side opposite the given angle in a right-angled triangle. Its corresponding inverse function is cosec⁻¹.

5. Secant: It is defined as the ratio of the length of the hypotenuse to the length of the adjacent side in a right-angled triangle. Its corresponding inverse function is sec⁻¹.

6. Cotangent: It is defined as the ratio of the length of the adjacent side to the length of the side opposite the given angle in a right-angled triangle. Its corresponding inverse function is cot⁻¹.

Hence, the answer to the given problem is g(x) = a · bx + h, and the explanation of the trigonometric function.

For more questions on: trigonometric function

https://brainly.com/question/30283044

#SPJ8

X-2
5 = 8 using the change of base formula logby=
log y
log b

Answers

By using the change of base formula: The solution to the equation log(base y) (X-2) = 5 is [tex]X = y^5 + 2.[/tex]

To solve the equation log(base y) (X-2) = 5 using the change of base formula, we can rewrite the equation as log(base b) (X-2) / log(base b) y = 5.

Using the change of base formula, we can choose any base for b.

Let's choose base 10 for simplicity.

So the equation becomes log(base 10) (X-2) / log(base 10) y = 5.

We know that log(base 10) (X-2) represents the logarithm of (X-2) to the base 10, and log(base 10) y represents the logarithm of y to the base 10.

Now, to solve for X, we can isolate it by multiplying both sides of the equation by log(base 10) y:

log(base 10) (X-2) = 5 [tex]\times[/tex] log(base 10) y.

This simplifies to:

log(base 10) (X-2) [tex]= log(base 10) y^5.[/tex]

Since the logarithms on both sides have the same base, we can remove the logarithm and equate the arguments:

[tex]X - 2 = y^5.[/tex]

Now we can solve for X by adding 2 to both sides:

[tex]X = y^5 + 2.[/tex]

For similar question on equation.

https://brainly.com/question/30092358  

#SPJ8

A water slide is a straight ramp 20 m long that starts from the top of a tower 18 m high. Find the angle the slide forms with the tower. Approximate to the nearest degree.

Answers

The angle the slide forms with the tower is approximately 41 degrees (rounded to the nearest degree).

To find the angle the slide forms with the tower, we can use trigonometric ratios. Let's consider the right triangle formed by the height of the tower (18 m), the length of the slide (20 m), and the angle we want to find.

Using the tangent function, we have:

tan(angle) = opposite/adjacent

In this case, the opposite side is the height of the tower (18 m) and the adjacent side is the length of the slide (20 m). Therefore:

tan(angle) = 18/20

To find the angle, we can take the inverse tangent (arctan) of both sides:

angle = arctan(18/20)

Using a calculator, we find that arctan(18/20) is approximately 40.56 degrees.

Therefore, the angle the slide forms with the tower is approximately 41 degrees (rounded to the nearest degree).

For more questions on tangent function, click on:

https://brainly.com/question/30162652

#SPJ8

NO LINKS!! URGENT HELP PLEASE!!

Find each indicated measure ​

Answers

Answer:

b. 160°

d. 55°

Step-by-step explanation:

The Inscribed Angle Theorem states that an inscribed angle is half of the central angle that subtends the same arc.

In other words, if an angle is inscribed in a circle and it intercepts an arc, then the measure of the inscribed angle is equal to half the measure of the central angle that also intersects that arc.

For question:

b.

By using above theorem:

m arc XW=2* m arc XYW

m arc XW= 2*80=160°

d.

m arc WV=125°

The Inscribed Angle Diameter Right Angle Theorem states that any angle inscribed in a circle that intercepts a diameter is a right angle.

By using this theorem:

m arc WV+m arc XV =180°

Now

m arc XV =180°-m arc WV

m arc XV=180°-125°

n arc XV=55°

Answer:

[tex]\text{b.} \quad m\overset{\frown}{XW}=160^{\circ}[/tex]

[tex]\text{d.} \quad m\overset{\frown}{XV}=55^{\circ}[/tex]

Step-by-step explanation:

An inscribed angle is the angle formed (vertex) when two chords meet at one point on a circle.

An intercepted arc is the arc that is between the endpoints of the chords that form the inscribed angle.

[tex]\hrulefill[/tex]

Part b

From inspection of the given circle:

The inscribed angle is m∠WRX = 80°The intercepted arc is arc XW.

According to the Inscribed Angle Theorem, the measure of an inscribed angle is half the measure of the intercepted arc. Therefore:

[tex]m \angle WRX = \dfrac{1}{2}\overset{\frown}{XW}[/tex]

         [tex]80^{\circ}= \dfrac{1}{2}\overset{\frown}{XW}[/tex]

   [tex]\boxed{m\overset{\frown}{XW}=160^{\circ}}[/tex]

[tex]\hrulefill[/tex]

Part d

From inspection of the given circle:

The inscribed angle is m∠WVX = 90°The intercepted arc is arc WX.

According to the Inscribed Angle Theorem, the measure of an inscribed angle is half the measure of the intercepted arc. Therefore:

[tex]m \angle WVX= \dfrac{1}{2}\overset{\frown}{WX}[/tex]

         [tex]90^{\circ}= \dfrac{1}{2}\overset{\frown}{WX}[/tex]

    [tex]m\overset{\frown}{WX}=180^{\circ}[/tex]

The sum of the measures of the arcs in a circle is 360°.

[tex]m\overset{\frown}{VW}+m\overset{\frown}{WX}+m\overset{\frown}{XV}=360^{\circ}[/tex]

Therefore, so find the measure of arc XV, substitute the found measures of arcs VW and WX, and solve for arc XV:

[tex]125^{\circ}+180^{\circ}+m\overset{\frown}{XV}=360^{\circ}[/tex]

          [tex]305^{\circ}+m\overset{\frown}{XV}=360^{\circ}[/tex]

                    [tex]\boxed{m\overset{\frown}{XV}=55^{\circ}}[/tex]

What is the percent of 1 - 3√(5/35) ?

Answers

Answer:

1 - 3√(5/35) = 1 - 3√(1/7) = 1 - 3*(1/sqrt(7)) ≈ 0.0755
0.0755 * 100 = 7.55%

Step-by-step explanation:

To find the percentage of 1 - 3√(5/35), we need to first evaluate the expression.

1 - 3√(5/35) = 1 - 3√(1/7) = 1 - 3*(1/sqrt(7)) ≈ 0.0755

To convert this decimal to a percentage, we simply multiply by 100:

0.0755 * 100 = 7.55%

1. Find (f + g)(1), when f(x) = x + 6 and g(x) = x - 3.​

Answers

Answer:

(f + g)(1) = 5

Step-by-step explanation:

(f + g) means we are going to add f(x) and g(x). But also, the (1) part means we are going to let x be equal to 1. We're going to fill in 1 in place of x. You can do this in either order.

Generally speaking its "easier" to fill in the 1 for x first and then do the adding part.

f(x) = x + 6

f(1) = 1 + 6 = 7

and,

g(x) = x - 3

g(1) = 1 - 3 = -2

add the 7 and -2 together:

7 + - 2

= 5

It works out the same if you add first:

f(x) + g(x)

= x + 6 + x - 3

= 2x + 3

then put the 1 in:

= 2×1 + 3

= 2 + 3

= 5

Hope this helps!

HELP I NEED ANSWER

Write an exponential decay function where the y-intercept is 4 and the y-values decrease by a factor of one-half as x increases by 1.

Answers

The exponential decay function that satisfies the given conditions is:

[tex]f(x) = 4 * (1/2)^x[/tex].

In this equation, the y-intercept is 4, which means that when x = 0, the function value is 4. As x increases by 1, the function decreases by a factor of one-half. This behavior is captured by raising 1/2 to the power of x in the equation.

The base of the exponent, 1/2, ensures that the function decreases exponentially. When x = 1, the exponent becomes 1, and[tex]1/2^1[/tex] equals 1/2. This means that the function value decreases to half of its previous value. Similarly, when x = 2, the exponent becomes 2, and[tex]1/2^2[/tex] equals 1/4. The function value decreases to one-fourth of its previous value, and so on.

By multiplying the exponential term by 4, we ensure that the y-intercept is 4. This scaling factor allows us to control the initial value of the function and match the given condition.

The exponential decay function[tex]f(x) = 4 * (1/2)^x[/tex] represents a decaying process where the y-values decrease exponentially as x increases, while starting at a y-intercept of 4.

For more such questions on exponential decay function

https://brainly.com/question/12139640

#SPJ8

Determine the surface area and volume. Note: The base is a square.

Answers

Answer:

volume=60cm3, surface area=96cm2

Step-by-step explanation:

volume=1/3×(6×6)×5

=60cm3

surface area= 4(1/2×6×5)+(6×6)

=96cm2

write and equation for the nth term of the geometric sequence for 2,8,32,128
then find a6 round to the nearest tenth if necessary.

Answers

The sixth term of the geometric sequence is 2048.

The given geometric sequence is 2, 8, 32, 128. We can observe that each term is obtained by multiplying the previous term by 4. Therefore, the common ratio (r) of the sequence is 4.

The formula for the nth term (an) of a geometric sequence is given by:

an = a1 * r^(n-1)

where a1 is the first term and r is the common ratio.

For this sequence, a1 = 2 and r = 4. Plugging in these values into the formula, we get:

an = 2 * 4^(n-1)

To find a6, we substitute n = 6 into the formula:

a6 = 2 * 4^(6-1)

  = 2 * 4^5

  = 2 * 1024

  = 2048

For more such questions on geometric,click on

https://brainly.com/question/19241268

#SPJ8

The Probable question may be:
Write an equation for the nth term of the geometric sequence 2, 8, 32, 128,

Then find a6. Round to the nearest tenth if necessary.

a = 5×4 X

a1 = n-1 X

Evaluate the expression 3.14(a2 + ab) when a = 3 and b = 4. (Input decimals only, such as 12.71, as the answer.) (4 points)

Answers

The final answer after evaluating the expression 3.14([tex]a^{2}[/tex] + ab) (by putting the value a = 3 and b = 4) is 65.94.

When a = 3 and b = 4, we substitute the supplied values into the expression to assess 3.14([tex]a^{2}[/tex] + ab):

3.14([tex]3^{2}[/tex] + 3 * 4)

We begin by solving the exponent:

[tex]3^{2}[/tex] = 3 * 3 = 9

The values are then entered into the expression:

3.14(9 + 3 * 4)

Inside the brackets, multiply the result:

3.14(9 + 12)

The numbers in the brackets are added:

3.14(21)

The decimal number is now multiplied by 21:

3.14 * 21 = 65.94

The evaluated expression is 65.94 as a result.

Mathematical expressions consist of at least two numbers or variables, at least one arithmetic operation, and a statement. It's possible to multiply, divide, add, or subtract with this mathematical operation.

know more about Mathematical expressions click here;

https://brainly.com/question/30350742

The answer is:

65.94

Work/explanation:

We're asked to evaluate the expression [tex]\sf{3.14(a^2+ab)}[/tex] for a = 3 and b = 4.

Plug in the data:

[tex]\sf{3.14(3^2+3*4)}[/tex]

[tex]\sf{3.14(9+12)}[/tex]

[tex]\sf{3.14(21)}[/tex]

[tex]\bf{65.94}[/tex]

Therefore, the answer is 65.94.

NO LINKS!! URGENT HELP PLEASE!!

Use the laws of sines and cosines for the missing variable ​

Answers

Answer:

x = 8

Step-by-step explanation:

The given diagram shows a triangle with the length of two sides and its included angle.

To find the value of the missing variable x, we can use the Law of Cosines.

[tex]\boxed{\begin{minipage}{6 cm}\underline{Law of Cosines} \\\\$c^2=a^2+b^2-2ab \cos C$\\\\where:\\ \phantom{ww}$\bullet$ $a, b$ and $c$ are the sides.\\ \phantom{ww}$\bullet$ $C$ is the angle opposite side $c$. \\\end{minipage}}[/tex]

From inspection of the given triangle:

a = 18b = 21c = xC = 22°

Substitute the values into the formula and solve for x:

[tex]\begin{aligned}x^2&=18^2+21^2-2(18)(21)\cos 22^{\circ}\\x^2&=324+441-756\cos 22^{\circ}\\x^2&=765-756\cos 22^{\circ}\\x&=\sqrt{765-756\cos 22^{\circ}}\\x&=8.00306228...\\x&=8\end{aligned}[/tex]

Therefore, the value of the missing variable x is x = 8, rounded to the nearest hundredth.

Assume that random guesses are made for seven multiple choice questions on an SAT​ test, so that there are n=7 ​trials, each with probability of success​ (correct) given by p=0.45. Find the indicated probability for the number of correct answers.
Find the probability that the number x of correct answers is fewer than 4.

Answers

To find the probability that the number of correct answers is fewer than 4, we need to calculate the cumulative probability up to 3 correct answers. Since each trial has a probability of success (correct) given by p = 0.45, we can use the binomial distribution formula to calculate the probabilities.

The formula for the binomial distribution is:
P(x) = (n C x) * (p^x) * ((1 - p)^(n - x))

Where:
P(x) is the probability of getting x successes,
n is the number of trials,
x is the number of successes,
p is the probability of success in a single trial, and
(1 - p) is the probability of failure in a single trial.

Now, let's calculate the probability that the number of correct answers is fewer than 4:

P(x < 4) = P(x = 0) + P(x = 1) + P(x = 2) + P(x = 3)

P(x < 4) = (7 C 0) * (0.45^0) * (0.55^7) + (7 C 1) * (0.45^1) * (0.55^6) + (7 C 2) * (0.45^2) * (0.55^5) + (7 C 3) * (0.45^3) * (0.55^4)

You can use these calculations to find the numerical value of P(x < 4).

Use the equation 20x+12y= 24 as an equation in three different linear systems. Write a second equation so that each system has a different number of solutions. Explain what you did for each system.​

Answers

We have created three different linear systems using the equation 20x + 12y = 24.

System 1 has infinitely many solutions, System 2 has no solution, and System 3 has a unique solution.

Let's create three different linear systems using the equation 20x + 12y = 24 and ensure that each system has a different number of solutions.

System 1:

Equation 1: 20x + 12y = 24 (given)

Equation 2: 40x + 24y = 48

Explanation: In this system, we multiplied both sides of the given equation by 2 to create Equation 2.

By doing so, we have essentially created two equations that are multiples of each other.

Since the equations are equivalent, they represent the same line, and the system has infinitely many solutions.

Any values of x and y that satisfy the first equation will automatically satisfy the second equation as well.

System 2:

Equation 1: 20x + 12y = 24 (given)

Equation 2: 20x + 12y = 48

Explanation: In this system, we changed the constant term in Equation 2 to 48.

By doing so, we have created two parallel lines with the same slope. Since the lines are parallel, they will never intersect, and the system has no solution.

There are no values of x and y that satisfy both equations simultaneously.

System 3:

Equation 1: 20x + 12y = 24 (given)

Equation 2: 40x + 24y = 48

Explanation: In this system, we multiplied both sides of Equation 2 by 2 to create Equation 2.

By doing so, we have created two equations that have the same slope but different y-intercepts.

Since the lines are not parallel and have different y-intercepts, they will intersect at a single point, and the system has a unique solution.

There will be one specific pair of values for x and y that satisfy both equations simultaneously.

For similar question on linear systems.  

https://brainly.com/question/30373310  

#SPJ8

Solve the system of equations.

y=x+5y=x2+5x−7

Enter your answers in the boxes.


Here's the answer for you guys if you need it (:

Answers

Answer:

(2, 7) and (-6, -1)

Step-by-step explanation:

y = x + 5

y = x² + 5x − 7

Equatig the above,

x² + 5x − 7 = x + 5

⇒ x² + 4x −12 = 0

⇒ x² + 6x - 2x - 12 = 0

⇒ x(x + 6) - 2(x + 6) = 0

⇒  (x - 2)(x + 6) = 0

⇒ x = 2 or x = -6

Eq(1) : y = x + 5 (given)

When x = 2

y = 2 + 5 = 7

Point : (2, 7)

When x = -6

y = -6 + 5 = -1

Point: (-6, -1)


Charimaya is running a race around a square track of length 75 m. Find the distance covered by her at the end of her fifth round.​

Answers

At the end of her fifth round, Charimaya would have covered a distance of 1500 meters.

To find the distance covered by Charimaya at the end of her fifth round, we need to calculate the total distance covered in one round and then multiply it by five.

Given that the track is square-shaped with a length of 75 m, we know that all four sides of the track are equal in length.

To calculate the distance covered in one round, we need to find the perimeter of the square track. Since all sides are equal, we can simply multiply the length of one side by 4.

The length of one side of the square track is 75 m. Therefore, the perimeter of the track is:

Perimeter = 4 × 75 m = 300 m

So, Charimaya covers a distance of 300 m in one round.

To find the distance covered at the end of her fifth round, we multiply the distance covered in one round by 5:

Distance covered in 5 rounds = 300 m × 5 = 1500 m

Therefore, at the end of her fifth round, Charimaya would have covered a distance of 1500 meters.

It's worth noting that since the track is square-shaped, each round consists of running along all four sides of the track.

for more such question on distance visit

https://brainly.com/question/30395212

#SPJ8

If x = 2, solve for y. y = 6.3x y=[?]​

Answers

Answer: y = 12.6

Step-by-step explanation:

Since x = 2 and y = 6.3 * x, y = 6.3 * 2.

6.3 * 2 is equal to 12.6, so y is 12.6.

Answer:

y = 12.6

Step-by-step explanation:

y = 6.3x                     x = 2

Solve for y.

y = 6.3(2)

y = 12.6

So, the answer is 12.6

Cual es l diferencia entre -4 y 6

Answers

Hola!

-4 - 6

= -10

the answer is -10

if there are 200 high school students in the district, how many would you expect to be in chemistry?

Answers

If there are 200 high school students in the district, the number of high school students expected to be in Chemistry is 60 because the percentage who offer Chemistry in the district is 30%.

How the number is determined:

The number of high school students who offer Chemistry in the district can be determined by multiplying the total number of high school students and the percentage of students who offer Chemistry.

The result of a multiplication operation (multiplicand and multiplier), which is one of the basic mathematical operations, is known as the product.

The total number of high school students in the district = 200

The percentage of students who offer Chemistry in the district = 30%

The number of students likely to be offering Chemistry in the district = 60 (200 x 30%).

Thus, we can conclude that 60 high school students are in Chemistry based on the Chemistry percentage.

Learn more about percentage and multiplication at https://brainly.com/question/24877689 and https://brainly.com/question/28768606.

#SPJ1

Complete Question:

The percentage of high school students in the district who offer Chemistry is 30%.  If there are 200 high school students in the district, how many would you expect to be in Chemistry?

Write a equation of the circle graphed below

Answers

Answer:

[tex](x+5)^2+(y+5)^2=25[/tex]

Step-by-step explanation:

Recall that the equation of a circle with center (h,k) and radius "r" is [tex](x-h)^2+(y-k)^2=r^2[/tex]

Since the center of the circle is (h,k)=(-5,-5) and the radius is r=5, then our equation will be [tex](x-(-5))^2+(y-(-5))^2=5^2[/tex] which can be simplified into [tex](x+5)^2+(y+5)^2=25[/tex]

Other Questions
Error bars on four different data points are shown below.Point 1 Point 2Point 3point 1point 2Opoint 3point 4Point 4Which of these data points is the most reliable? Vectors vv and ww have magnitudes ||v||=||v||=11 and ||w||=||w||=8 and the angle between these vectors is 129. What is the magnitude of their cross product? An investor has just entered 2 short palladium futures contracts at a futures price of $1,804 per troy ounce. The size of each contract is 100 troy ounces. The initial margin is $20,000 per contract and the maintenance margin is $15,000 per contract. A month after opening the position the futures price rises to $1,972 per barrel. What is the balance of the total margin account at the end of the month? (Assume that no margin call has occurred over this period and your answer should be to the nearest dollar, without the dollar sign.) A point has coordinates (x,y,z) in cartesian coordinate systom, use spherical coordinates as generalized coordinates to calculate dz b. A rocket has mass mand velocity v at time t. Derive rocket equation assuming that external forces acting on rocket are zero. c. A system of binary stars (A&B) has total mass of 16 Msun and their distance from center of mass is 3 AU and 1AU. Find their individual masses Using a diagram or diagrams, explain how a cap-and-trade scheme could result in pollution reduction. (a) Let X, Y, and Z be arbitrary sets. Use an element argument to prove thatX (Y Z) = (X Y) Z.b) For each of the following statements, either prove that is true or find acounterexample that is false:i. If A, B and C are arbitrary sets, then A (B C) = (A B) (A C).II. If A, B and C are arbitrary sets, then (A B) C = A (B C).III. For all sets A and B, if A B = , then B A 220 Vrms, 60 Hz three-phase wye-connected induction motor draws 31.87A at a power factor of 75 % lagging. The total stator copper losses are 400 W, and the total rotor copper losses are 150 W. The rotational losses are 500 W. Calculate the air gap power, developed power and efficiency of the motor. At the end of Ch. 33 may be found this statement: "Although geometry has been studied since antiquity, the development of algorithms for geometric problems is relatively new." Supply your opinion as to why this might be the case. [Use the text box below for your answer. The successful effort will consist of at least 50 words.] Attempt: Do No Harm / 0.5 2. Demand terminology Complete the following table by selecting the tem that matches each definition. Apply your understanding of the previous key terms by completing the following scenario with the appropriate terminology. Your coworker Kevin is really concemed about a project that he has just been assigned. He is in charge of analyzing and determining conditions in the market for televisions from an extensive sales report. If Kevin's boss is interested in a graphical representation of the relationship between the price and quantity of televisions demanded, you would advise your coworker to construct using the data provided. However, If Kevin's boss is more interested in the detalled numbers used to construct this visual representation, you would instead advise your coworker that would be more appropriate. That is when the aliens shined light onto their double slit and shouted "Wahahaha, the pattern through this double slit has both double-slit and single-slit effects! You will be tempted to calculate the relationship between the slit width a and slit separation d! While you do that, we are going to attack you, hehehehe!!" They were right, as soon as you saw that the second diffraction minimum coincided with the 14th double-slit maximum, you couldn't think about anything else. What is the relationship between a (slit width) and d (slit separation)? 1 d = 14 a = Od = 7a Od = a/14 d = a/7 An X-ray photon is scattered at an angle of =180.0 from an electron that is initially at rest. After scattering, the electron has a speed of 5.4010 6m/s. Find the wavelength of the incident X-ray photon. For a reduction in population of a spore by a factor of 10, and a D121c of 4s, the F121 value of that process is What is forensic accounting? How does the practice of forensic accountants compare to both the financial statement audit and fraud audit? Please use scholarly journal articles and/or trade journals to help support yourreasoning Generate a complete TM (Turing Machine) from the language below. Include its Formal Definition and Transition Diagramw {0, 1}w does not contain twice as many 0s as 1s Differentiate the three possible types of boundary conditions that can be used for second-order partial differential equations, and give a realistic example with associated initial conditions for each. For the following inductors, find the energy stored in the magnetic field.a) A 10.0cm long solenoid with 4 turns/cm, a 1.0cm radius, and a current of 4.0 A.b) A rectangular toroid with inner radius 10.0 cm, outer radius 14.0cm, and a height of 2.0cm. It is comprised of a total of 1000 windings and has a current of 1.25 A.c) An inductor with a potential difference of 55mV after 1.5s with a current that varies as I(t) =I0 Ct. I0 = 10.0A, and C = 3A/s. The utility function is: (x,y)=x 112 y 119Maximize utility subject to the budget constraint: 3x+1y=132 (a.) What is the Marginal Rate of Substitution (i.e. the slope of the ind Select an answer and submit. For keyboard navigation, use the up/down arrow k 6x2yb 9x4yc 9x2yd 9x2yCopied and pasted from part (a.) for your convenience The utility function is: U(x,y)=x 112y 119Maximize utility subject to the budget constraint: 3x+1y=132 (b.) What is the slope of the budget constraint line? Select an answer and submit. For keyboard navigation, use the up/down arrow keys to select an answer. a 12b 13 What is the ratio of the sides? Need asap A 250 mL portion of a solution that contains 1.5 mM copper (II)nitrate is mixed with a solution that contains 0.100 M NaCN. Afterequilibrium is reached what concentration of Cu2+ (aq)remains. Using: C Language & tinkercad.com & arduino uno r3Implement and test a function called get_elapsed_time which computes the elapsed time from power-up in a ATMEGA328P microcontroller. The program will use a designated 16-bit timer in normal mode, with overflow interrupt handling. Time calculation will be accurate to the nearest timer update "tick"Your task is to adapt the sample program provided in "Lecture 9: Implementing Timer Overflow ISR" to implement a new library function called get_elapsed_time () which is capable of tracking elapsed time for a reasonably long period.Use Timer 1, and set it up in normal operational mode so that it overflows approximately once every 0.25 seconds. Create a global 32-bit unsigned integer variable called counter. Implement an interrupt service routine which increments counter by 1 every time the timer overflows. Implement a function called get_elapsed_time() which returns the elapsed time since program start, accurate to the nearest timer stick", as a double-precision floating point value. To implement the function, follow the detailed specification laid out in comments in the program skeleton below.Notes Use this test driver to implement and test your function in TinkerCad Circuits prior to submission. #include #include #include #include #include #include #include #include void uart_setup(void);void uart_put_byte(unsigned char byte_val);void uart_printf(const char * fmt, ...);void setup(void) {// (a) Initialise Timer 1 in normal mode so that it overflows// with a period of approximately 0.25 seconds.// Hint: use the table you completed in a previous exercise.// (b) Enable timer overflow for Timer 1.// (c) Turn on interrupts.// (d) Send a debugging message to the serial port using// the uart_printf function defined below. The message should consist of// your student number, "n10507621", followed immediately by a comma,// followed by the pre-scale factor that corresponds to a timer overflow// period of approximately 0.25 seconds. Terminate the// debugging message with a carriage-return-linefeed pair, "\r\n".}// (e) Create a volatile global variable called counter.// The variable should be a 32-bit unsigned integer of type uint32_t.// Initialise the variable to 0.// INSERT GLOBAL VARIABLE HERE// (f) Define an interrupt service routine to process timer overflow// interrupts for Timer 1. Every time the interrupt service// routine is called, counter should increment by 1.// INSERT ISR HERE// (g) Define a function called get_elapsed_time which has// no parameters, but returns a value of type double which contains// the total elapsed time measured up to the time at which it is called.// Use the method demonstrated in the Topic 9 lecture to compute the// elapsed time, taking into account the fact that the timer counter has// 16 bits rather than 8 bits.// INSERT FUNCTION HERE// -------------------------------------------------// Helper functions.// -------------------------------------------------// Make sure this is not too big!char buffer[100];void uart_setup(void) {#define BAUD (9600)#define UBRR (F_CPU / 16 / BAUD - 1)UBRR0H = UBRR >> 8;UBRR0L = UBRR & 0b11111111;UCSR0B = (1