please paraphrase this paragraph

As a conclusion we first learned what is Discrete Fourier Transform and
why is it very important in signal processing science as it helps us to convert the discrete signal from time domain into frequency domain and the inverse DFT does the opposite converting the signal from frequency domain back into time domain. We have also learned the difference between DFT and the FFT algorithm where the FFT is an efficient
algorithm created to simplify the DFT process as it is faster and more accurate. We also learned how to perform and implement this algorithm using Matlab,

Answer:

Force = mass × acceleration.

This question involves the concepts of the law of conservation of momentum, velocity, and mass.

The two quantities, the students should multiply before and after the collision are "A. mass and velocity".

According to the law of conservation of momentum, In an isolated system, the total momentum of the system before the collision is always equal to the total momentum of the system after the collision.

To prove the law of conservation of momentum, consider two balls of masses ‘m₁’ and ‘m₂’, moving with velocities ‘u₁’ and ‘u₂’, respectively, such that u₁ is greater than u₂. After some time, these balls collide with each other and their velocities become ‘v₁’ and ‘v₂’, respectively.

This situation is illustrated in the attached picture.

So, according to the law of conservation of momentum:

Total Momentum Before Collision = Total Momentum After Collision

m₁u₁ + m₂u₂ = m₁v₁ + m₂v₂

Learn more about the law of conservation of momentum here:

https://brainly.com/question/1113396?referrer=searchResults

Sorry this is a year late, but here it is for those of you who are stuck on the same thing.

NOTE: Please Check and Confirm That You Are On The Same Assignment with The Same Questions and Number of Questions. Thank You and Good Luck!

1. Mass & velocity

2. The total momentum after the collision is the same as the total momentum before the collision.

3. 0.54 kg⋅m/s

4. The system has external forces, such as friction and air resistance, acting on it.

5. 3.0 m/s

Answer:

Summertime

Explanation:

the sun never sets south of the Antarctic circle in the summertime.

The reason why a tiny 1.5 V cell can operate a calculator for a year, but would burn out in a few hours in a tiny robot is because the power demands of the calculator are way less than that of the tiny robot.

Cell capacity is measured by the amount of Amps and Amp Hour (A.H.) capacity for how long a battery can endure.

On the label or in the user's manual, batteries mention their reserve capability, which specifies the approximate amount of time they can operate between charges. You might notice a shorter or longer battery life if your circuit uses more or less power than this hypothetical circuit. Calculate the battery's entire capacity and divide it by the power of your circuit to see how long it can survive.

Load current, which is influenced by the power of the linked item, influences how quickly the battery's electrical capacity will be used up.

The reason the 1.5 V cell would operate the calculator for a year and yet die in a few hours with the robot is that the robot has a much higher load current than the calculator.

Find out more on cell life at https://brainly.com/question/4503865

#SPJ1

Answer:

C

Explanation:

Pls brainliest

Answer:

A) -31.2 rad/s

B) 28.1 rad/s^2

Explanation:

Answer:

Explanation:

An example of an intense aerobic activity would be running/ sprinting sprinting targets six specific muscle groups: hamstrings, quadriceps, glutes, hips, abdominals and calves. Sprinting is a total body workout featuring short, high-intensity repetitions and long, easy recoveries.

Hi there!

We can use the equation:

d = v₀t + 1/2at²

Where:

v₀ = initial velocity downward

a = acceleration due to gravity

t = time

Plug in given values:

d = 4(12) + 1/2(9.8)(12²)

d = 48 + 705.6 = 753.6 m

The magnitude of the load L on the crane before the collapse is 3211.81 N

To determine the magnitude of the load on the crane (L), we will need to make use of the equilibrium conditions of the torque.

It is always an ideal process to list out all the parameters given as this will let you understand how you can determine the answer to the question from the given parameters.

From the given information;

From the question;

the angle at which the crane is positioned can be determined by taking the tangent of the angle θ. i.e.

[tex]\mathbf{tan \ \theta = \dfrac{h}{d-s}}[/tex]

[tex]\mathbf{\theta = tan^{-1} \Big ( \dfrac{h}{d-s} \Big )}[/tex]

[tex]\mathbf{\theta = tan^{-1} \Big ( \dfrac{2.070 }{5.580 - 0.522} \Big )}[/tex]

[tex]\mathbf{\theta =22.26^0}[/tex]

Consider the equilibrium conditions of the torques with respect to the magnitude of the load at point P.

∴

[tex]\mathbf{Tsin \theta (d-s) - W_L (d-x) -(Mg) (\dfrac{d}{2}) = 0}[/tex]

By making the magnitude of the load [tex]\mathbf{W_L}[/tex] the subject of the formula, we have:

[tex]\mathbf{W_L = \dfrac{Tsin \theta (d-x) -(Mg) (\dfrac{d}{2})}{ (d-s) } }[/tex]

[tex]\mathbf{W_L = \dfrac{(11650 )sin (22.26) (5.580-1.350) -(88.50\times 9.81) (\dfrac{5.580}{2})}{ (5.580-0.522) } }[/tex]

[tex]\mathbf{W_L = 3211.81 \ N }[/tex]

Therefore, we can conclude that the magnitude of the load is 3211.81 N

Learn more about the magnitude of an object here:

https://brainly.com/question/24623437?referrer=searchResults

Answer:

Explanation:

Initial velocity 25 m/s

final velocity 0 m/s

The ratio of the two is undefined as dividing by zero is wonky.

Answer:

Explanation:

Conservation of momentum

Let's say the first child was headed north

North momentum

75(0) + 20(2) + 15(3sin45) = (75 + 20 + 15)vn

vn = 0.6529 m/s

East momentum

75(0) + 20(0) + 15(3cos45) = (75 + 20 + 15)ve

ve = 0.28927 m/s

θ = arctan(0.28927/0.6529)

θ = 23.896...

θ = 24° east of north

Answer:

equal

Explanation:

A goal statement may involve how to develop physical skills in a given outdoor activity (e.g., soccer) in order to reach my maximum potential. It involves a statement of purpose.

A goal statement is a statement of purpose that describes long-term professional and/or motivational objectives.

A goal statement involves writing a statement about how to reach personal objectives, i.e., how to accomplish a career, job title, sports skills, educational training, etc.

An excellent statement of purpose should ideally be clear, specific, acceptable, time-bound and realistic.

Learn more in:

https://brainly.com/question/14607827

Explanation:

a. (i) When the variable resistor is set at zero, the only resistance in the circuit is due to the lamp. So the current flowing through the circuit is

[tex]I = \dfrac{V}{R} = \dfrac{220\:\text{V}}{440\:Ω} = 0.5\:\text{A}[/tex]

(ii) The power output P of the lamp is given by

[tex]P = I^2R = (0.5\:\text{A})^2(440\:Ω) = 110\:\text{W}[/tex]

b. (i) The variable resistor is in a series connection to the lamp so when its value is set to its maximum value of 660 Ω, the total resistance of the circuit is simply the sum of the two resistances:

[tex]R_T = R_{vr} + R_L = 660\:Ω + 440\:Ω = 1100\:Ω[/tex]

Therefore, the current through the circuit is

[tex]I = \dfrac{V}{R_T} = \dfrac{220\:\text{V}}{1100\:Ω} = 0.20\:\text{A}[/tex]

(ii) Using the result in Part (ii), we can solve for the potential difference across the lamp as follows:

[tex]V_L = IR_L = (0.20\:\text{A})(440\:Ω) = 88\:\text{V}[/tex]

(iii) The power output of the lamp is

[tex]P = I^2R_L = (0.20\:\text{A})^2(440\:Ω) = 17.6\:\text{W}[/tex]

(iv) The rate at which electrical energy is supplied, i.e., the power output of the circuit is equal to the square of the current multiplied by the total resistance of the circuit:

[tex]P = I^2R_T = (0.20\:\text{A})^2(1100\:Ω) = 44\:\text{W}[/tex]

Answer:

90m/h N

Explanation:

we consider janes velocity to the positive X axis so Vj=280km/s

and the final position a dot in on the graph r=294km, we find the x and y components:

294*cos(17.8)=280 X+ confirming our theory

294*sin(17.8)=90 Y+ or N and that's the winds' velocity.

Answer:

D.) the same.

They are traveling in the same vacuum so there is no resistance and no outside influences. They will travel at the same speed as each other will little to no variance in their speed.

Explanation:

hope this helps. . . <3

good luck!    uωu

If the load is in the equilibrium, the magnitude of the tension in the cable is equal to 1,414.5 Newton.

Given the following data:

Scientific data:

To calculate the magnitude of the tension in the cable, if the load is in the equilibrium:

First of all, we would determine the tension caused by the horizontal component of the force:

[tex]\sum F_y ; Tcos\theta - mg=0\\\\Tcos\theta = mg\\\\T=\frac{mg}{cos\theta} \\\\T=\frac{250 \times 9.8}{cos30} \\\\T= \frac{2450}{0.8660}[/tex]

T = 2,829.1 Newton

The magnitude of the tension in the cable is given by:

[tex]\sum F_x ; F - Tsin\theta = 0\\\\F = Tsin\theta\\\\F = 2829.1sin30\\\\F = 2829.1 \times 0.5[/tex]

F = 1,414.5 Newton.

Read more on tension here: https://brainly.com/question/18792908

Answer:

B. . by consuming plants or other animals

Find the distance the ball travels:

3.4 meters - 1.5 meters = 1.9 meters

Now divide the distance the ball travels by the speed:

1.9 meters / 4.4 m/s = 0.43 seconds

Answer:

Explanation:

s = s₀ + v₀t + ½at²

There are an infinite number of solutions to this question as posed because we are not told the direction of the initial velocity.

Assuming ground is level and origin and UP the positive direction

The shortest amount of time possible is when the initial velocity is straight down

1.5 = 3.4 - 4.4t + ½(-9.8)t²

0 = -4.9t² - 4.4t + 1.9

t = (4.4 ±√(4.4² - 4(-4.9)(1.9))) / (2(-4.9))

positive answer is

t = 0.32 s

The longest amount of time possible is when the initial velocity is straight up.

1.5 = 3.4 + 4.4t + ½(-9.8)t²

0 = -4.9t² + 4.4t + 1.9

t = (-4.4 ±√(4.4² - 4(-4.9)(1.9))) / (2(-4.9))

positive answer

t = 1.22 s

If the initial velocity is horizontal, meaning no vertical velocity

1.5 = 3.4 + 0t + ½(-9.8)t²

-4.9t² = -1.9

t² = 0.38775...

t = 0.62 s

Any angle between UP and Down will have a different initial vertical velocity and result in a different time to catch height.

It appears from the comments on the other answer, that I have shown you how to arrive at three of the four possible solutions.  The initial direction is very important.

Answer:

Explanation:

F = ma

F = 2.60(14.0)

F = 36.4 N

We have that for the Question "find (a) the mass of CCl4 per second that passes point A and (b) the concentration of CCl4 at point A."

Answers:

From the question we are told

The concentration of [tex]CCl_4[/tex] at the left end of the tube is maintained at 1.71 x 10-2 kg/m3, and the diffusion constant is 21.9 x 10-10 m2/s. The CCl4 enters the tube at a mass rate of 5.86 x 10-13 kg/s

A) the mass flow rate of CCI_4 as it passes point A is the same as the mass flow rate at which CCI_4 enters the left end of the tube

Therefore, the mass flow rate of CCI_4 at point A

=  [tex]5.86*10^{-13} kg/s[/tex]

B) From Fick's law

[tex]\deltaC = \frac{mL}{DAt}\\\\ Assume L = 5*10^{-3}, A = 3*10^{-4}\\\\\deltaC = \frac{5.86*10^{-13} * 5*10^{-3}}{21.9*10^{-10} * 3*10^{-4}}\\\\\deltaC = 4.46*10^{-3}kg/m^3[/tex]

Then,

[tex]Concentration = 1.71*10^{-2} - 4.46*10^{-3}\\\\= 12.6*10^{-3}kg/m^3[/tex]

For more information on this visit

https://brainly.com/question/23379286

Answer:

Enrol in our 50 studyscore masterclass. Click here! Fuel cells are a type of primary cell in that they are not recharged, However, they are unique because they never run out, if the reactants are constantly supplied.

Answer:

A. Determine the equation of constraints

Answer:

Its acceleration will increase.

Explanation:

For an object spinning around a central point, Its acceleration will increase if its distance from the centre is decreased.

The rate at which an item changes its velocity is known as acceleration, a vector quantity. If an object's velocity is changing, it is acceleration. The net acceleration that objects get as a result of the combined action of gravity and centrifugal force is known as the Earth's gravity

This is the acceleration of an object in a circle of radius r at a speed v. So, centripetal acceleration is greater at high speeds and in sharp curves smaller radii and for lager radii acceleration will be less.

acceleration, a = v²/r

For an object spinning around a central point, Its acceleration will increase if its distance from the centre is decreased.

To learn more about acceleration refer to the link:

brainly.com/question/12550364

#SPJ2

Answer:

The speed of sound varies with the material in which the waves travel.

Explanation:

knowledge and research

It can be concluded as per the given table that the speed of sound varies with the material in which the waves travel. The correct option is A.

Speed is the pace at which an object's position changes in any direction. The distance travelled in relation to the time it took to travel that distance is how speed is defined. Since speed simply has a direction and no magnitude, it is a scalar quantity.

It has a dimension of time-distance. As a result, the fundamental unit of time and the basic unit of distance are combined to form the SI unit of speed. Thus, the metre per second (m/s) is the SI unit of speed.

According to the given table, it can be inferred that the material in which the waves travel affects the speed of sound.

Thus, the correct option is A.

For more details regarding speed, visit:

https://brainly.com/question/28224010

#SPJ2

[tex] \: \: \: \: [/tex]

[tex] \: \: \: \: \: [/tex]

dissimilar with respect to one or more particular characters

The gravitational force acting between the two bodies is given by:

F=G

r

2

m

1

m

2

G=

m

1

m

2

Fr

2

The dimension of the force is [MLT

−2

]

=

[M][M]

[MLT

−2

][L

2

]

=M

−1

L

3

T

−2

Answer:

a battery, wires, and a switch.

Explanation:

All circuits include?