Answer:
Conductors- copper, aluminum, gold, and silver.
Insulators- glass, air, plastic, rubber, and wood.
Explanation:
Answer: 5 conductors are copper, aluminum, gold, iron, and silver and 5 insulators are glass, air, plastic, rubber, and wood.
How should the mass of a harmonic oscillator be changed to double the frequency? Can the frequency be tripled by a suitable adjustment of the mass?
Answer:
a. [tex]m' = \frac{m}{4}[/tex]
b. [tex]m' = \frac{m}{9}[/tex]
Explanation:
The frequency of a harmonic oscillator is given by the following formula:
[tex]\omega = \sqrt{\frac{k}{m}}[/tex] ----------------- equation (1)
a.
In order to double the frequency of this oscillator:
ω' = 2ω
m' = ?
Therefore,
[tex]\omega ' = 2\omega = \sqrt{\frac{k}{m'}}[/tex]
using equation (1):
[tex]2 \sqrt{\frac{k}{m}} = \sqrt{\frac{k}{m'}}\\\\ \frac{4}{m} = \frac{1}{m'}[/tex]
[tex]m' = \frac{m}{4}[/tex]
a.
In order to triple the frequency of this oscillator:
ω' = 3ω
m' = ?
Therefore,
[tex]\omega ' = 3\omega = \sqrt{\frac{k}{m'}}[/tex]
using equation (1):
[tex]3\sqrt{\frac{k}{m}} = \sqrt{\frac{k}{m'}}\\\\ \frac{9}{m} = \frac{1}{m'}[/tex]
[tex]m' = \frac{m}{9}[/tex]
A) To double the Frequency of a harmonic oscillator ;
Divide the mass by four i.e. m₁ = m / 4
B) To triple the frequency of a harmonic oscillator :
Divide the mass by nine (9) i.e. m₂ = m / 9
Given that The frequency of a harmonic oscillator is expressed as
[tex]w = \sqrt{\frac{k}{m} }[/tex] -- ( 1 )
A) Doubling the frequency
[tex]2w = \sqrt{\frac{k}{m_{1} } }[/tex] ---- ( 2 )
Applying equation ( 1 ) and ( 2 )
[tex]2\sqrt{\frac{k}{m} } = \sqrt{\frac{k}{m_{1} } }[/tex]
squaring both sides
( 4 / m ) = 1 / m₁
∴ m₁ ( new mass ) = m / 4
B) Tripling the frequency
3w = [tex]\sqrt{\frac{k}{m_{2} } }[/tex] ---- ( 3 )
applying equation ( 1 ) and ( 3 )
[tex]3 \sqrt{\frac{k}{m} } = \sqrt{\frac{k}{m_{2} } }[/tex]
squaring both sides
( 9 / m ) = 1 / m₂
∴ m₂ = m / 9
Hence we can conclude that To double the Frequency of a harmonic oscillator m₁ = m / 4 and To triple the frequency of a harmonic oscillator : m₂ = m / 9
Learn more : https://brainly.com/question/20050933
A student is performing an experiment that involves the charge on a metal sphere that is attached to a charged electroscope. A charged rod is brought near the sphere without touching it. As a result the leaves of the electroscope separate more. The rod is then removed, and the leaves return to their initial separated position. The student repeats the procedure, but this time the electroscope is grounded and the ground is removed before the rod is removed from near the sphere. The leaves again end up separated. What can be concluded about the charge on the separated leaves of the electroscope
Answer:
The leaves have a charge in each experiment, but the sign of the charge cannot be determined.
Explanation:
In the first experiment, A charged rod is brought near the sphere without touching it. As a result the leaves of the electroscope separate more.
Thus indicates that there are charges involved. Now, like charges would repel like what is happening here but we don't know if they are both positive or negative because in both cases, they will still repel.
Now for the second experiment, electroscope is grounded and the ground is removed before the rod is removed from near the sphere. The leaves end up being separated again.
Similar to the first time, it's clear there are charges but the charges repel. Thus, they are the same sign charges but we don't know if they are both positive or negative.
Thus, in both cases we can conclude that the leaves have charges but we don't know their signs.
Are volcanoes fed by highly viscous magma a greater threat to life and property than volcanoes supplied with very fluid magma?
Answer:
A volcano fed by highly viscous magma is likely to be a greater threat to life and property than a volcano supplied with very fluid magma because with high viscous magma gas is trapped more in the magma so the gas will build up and then eventually explode, whereas with fluid magma the gas can escape allowing the magma.
HOPE THIS HELPS!!!
Explanation:
Less fluid magma done great damaged to the property and life as compared to highly viscus magma.
Highly viscus magma VS less viscous magmaNo, volcanoes that are fed by highly viscous magma are not a greater threat to life and property than volcanoes supplied with very fluid magma because the highly viscous magma can't move to a large distance due to its large viscosity.
While on the other hand, those volcanoes that supplied with very fluid magma do great damaged to the property due to its easily flowing on the surface of earth so we can conclude that less fluid magma done great damaged to the property and life as compared to highly viscus magma.
Learn more about magma here: https://brainly.com/question/23661578
3.A bridge usually has expansion joints. They allow the bridge to become slightly longer when it
experiences thermal expansion. Look at the diagram below of the bridge joint. When the weather
becomes cool, the "teeth" of the joint move away from each other. When the weather becomes
warm, they move toward each other. Which statement is true about the particles that make up the
bridge?
A.When the sides of the joint are close together, the particles have more kinetic energy
than they do when the sides are farther apart.
B.When the sides of the joint are far apart, the particles have more kinetic energy than
they do when the sides are closer together.
C.The particles contain the same amount of kinetic energy no matter how much the
bridge has expanded.
D. The kinetic energy of the particles changes, but the amount it changes does not
depend on the temperature of the bridge.
Answer:
a) When the sides of the joint are close together, the particles have more kinetic energy than they do when sides are farther apart.
Explanation:
A 15.5 kg box is pushed across the lunch table. The acceleration of the box is 24.2 m/S. What is the net force applied to the box?
Answer:
375.1 NExplanation:
The force acting on an object given it's mass and acceleration can be found by using the formula
force = mass × acceleration
From the question we have
force = 15.5 × 24.2
We have the final answer as
375.1 NHope this helps you
Please halp
Why does a suspended magnet always rest in the North-South direction?
Explanation:
because magnet attract opposite sides. like north and south.
Answer:
Its because the magnet has both north and south pole, so when suspended it turns its south pole towards southern hemisphere and the north pole towards northern hemisphere
Hope it helped u,
pls mark as the brainliest
^_^
Starting at t = 0 a net external force in the +x-direction is applied to an object that has mass 5.00 kg. A graph of the force as a function of time is a straight line that passes through the origin and has slope 5.00 N/s.
If the object is at rest at t = 0 what is the magnitude of the force when the object has reached a speed of 9.00 m/s?
Express your answer with the appropriate units.
Answer:
15√2 N
Explanation:
The acceleration is given by ...
a = F/m = 5t/5 = t . . . . meters/second^2
The velocity is the integral of acceleration:
v = ∫a·dt = (1/2)t^2
This will be 9 m/s when ...
9 = (1/2)t^2
t = √18 . . . . seconds
And the force at that time is ...
F = 5(√18) = 15√2 . . . . newtons
At what angle should the roadway on a curve with a 50m radius be banked to allow cars to negotiate the curve at 12 m/s even if the roadway is frictionless?
Answer:
The road bank angle is 16.38⁰.
Explanation:
radius of curvature of the road, r = 50 m
allowable speed of car on the road, v = 12 m/s
The bank angle is calculated as;
[tex]\theta = tan^{-1} (\frac{v^2}{gr} )[/tex]
where;
θ is the road bank angle
g is acceleration due to gravity = 9.8 m/s²
[tex]\theta = tan^{-1} (\frac{v^2}{gr} )\\\\\theta = tan^{-1} (\frac{12^2}{9.8 \times 50} )\\\\\theta = tan^{-1} ( 0.2939)\\\\\theta = 16.38 ^0[/tex]
Therefore, the road bank angle is 16.38⁰.
If the coefficient of kinetic friction between tires and dry pavement is 0.80, what is the shortest distance in which you can stop an automobile by locking the brakes when traveling at 29.1 m/s?
A. 54 m
B. 50 m
C. 64 m
D. 60 m
Answer:
54m is the answer......a planet has been detected in a circular orbit around the star Rho1 Cancri with an orbital radius equal to 1.65 x 10^10 m. the orbital period of this planet is approximately 14.5 days which is the approximate mass of the star pho1 cancri
Answer:
Approximately [tex]1.69 \times 10^{30}\; \rm kg[/tex].
Explanation:
Deduction of the formulaLet [tex]M[/tex] and [tex]m[/tex] denote the mass of the star and the planet, respectively.
Let [tex]G[/tex] denote the constant of universal gravitation ([tex]G \approx 6.67408 \times 10^{-11}\; \rm m^{3} \cdot kg^{-1}\cdot s^{-2}[/tex].)
Let [tex]r[/tex] denote the orbital radius of this planet (assuming that [tex]r\![/tex] is constant.) The question states that [tex]r = 1.65 \times 10^{10}\; \rm m[/tex].
The size of gravitational attraction of the star on this planet would be:[tex]\displaystyle \frac{G \cdot M \cdot m}{r^{2}}[/tex].
If attraction from the star is the only force on this planet, the net force on this planet would be [tex]\displaystyle \frac{G \cdot M \cdot m}{r^{2}}[/tex].
Let [tex]\omega[/tex] denote the angular velocity of this planet as it travels along its circular orbit around the star. The size of [tex]\omega\![/tex] could be found from the period [tex]T[/tex] of each orbit: [tex]\omega = (2\, \pi) / T[/tex].
In other words, this planet of mass [tex]m[/tex] is in a circular motion with radius [tex]r[/tex] and angular velocity [tex]\omega[/tex]. Therefore, the net force on this planet should be equal to [tex]m \cdot \omega^2 \cdot r[/tex].
Hence, there are two expressions for the net force on this planet:
[tex]\text{Net Force} = \displaystyle \frac{G \cdot M \cdot m}{r^{2}}[/tex] from universal gravitation, and[tex]\displaystyle \text{Net Force} = m \cdot \omega^2 \cdot r = {\left(\frac{2\pi}{T}\right)}^{2} m \cdot r[/tex] from circular motion.Equate the right-hand side of these two equations:
[tex]\displaystyle \frac{G \cdot M \cdot m}{r^2} = {\left(\frac{2\pi}{T}\right)}^{2}\, m \cdot r[/tex].
Simplify this equation and solve for [tex]M[/tex], the mass of the star:
[tex]\displaystyle M = \frac{{(2\pi / T)}^2 \cdot r^3}{G}[/tex].
Notice that [tex]m[/tex], the mass of the planet, was eliminated from the equation. That explains why this question could be solved without knowing the exact mass of the observed planet.
Actual CalculationsConvert the orbital period of this star to standard units:
[tex]\begin{aligned}T &= 14.5\; \text{day} \times \frac{24\; \text{hour}}{1\; \text{day}} \times \frac{3600\; \text{second}}{1\; \text{hour}} \\ & = 1.2528 \times 10^{6}\; \rm \text{second}\end{aligned}[/tex].
Calculate the mass of the star:
[tex]\begin{aligned} M &= \frac{{(2\pi / T)}^2 \cdot r^3}{G} \\ &\approx \frac{\displaystyle {\left(\frac{2\pi}{1.2528 \times 10^{6}\; \rm s}\right)}^{2} \times \left(1.65 \times 10^{10}\; \rm m\right)^{3}}{6.67408 \times 10^{-11}\; \rm m^{3}\cdot kg^{-1} \cdot s^{-2}}\\ &\approx 1.69 \times 10^{30}\; \rm kg\end{aligned}[/tex].
Show that a 2,500,000-J change in kinetic energy occurs for an airplane that is moved 500 m in takeoff by a sustained force of 5000 N.
Answer:
The answer to your question is given below
Explanation:
To solve this problem, we'll assume that the plane is initially at rest.
Hence, the kinetic energy of the plane at rest is zero i.e Initial kinetic energy (KE₁) = 0
Next, we shall determine the final kinetic energy of the plan when the force was applied. This can be obtained as follow:
Force (F) = 5000 N
Distance (s) = 500 m
Energy (E) =?
E = F × s
E = 5000 × 500
E = 2500000 J
Since energy an kinetic energy has the same unit of measurement, thus, the final kinetic energy (KE₂) of the plane is 2500000 J
Finally, we shall determine the change in the kinetic energy of the plane. This can be obtained as follow:
Initial kinetic energy (KE₁) = 0
Final kinetic energy (KE₂) = 2500000 J
Change in kinetic energy (ΔKE) =?
ΔKE = KE₂ – KE₁
ΔKE = 2500000 – 0
ΔKE = 2500000 J
Hence, the change in the kinetic energy of the plane is 2500000 J.
Using Rayleigh's criterion, calculate the diameter of an earth-based telescope that gives this resolution with 700 nm light.
Complete Question
Due to blurring caused by atmospheric distortion, the best resolution that can be obtained by a normal, earth-based, visible-light telescope is about 0.3 arcsecond (there are 60 arcminutes in a degree and 60 arcseconds in an arcminute).Using Rayleigh's criterion, calculate the diameter of an earth-based telescope that gives this resolution with 700 nm light
Answer:
The diameter is [tex]D = 0.59 \ m[/tex]
Explanation:
From the question we are told that
The best resolution is [tex]\theta = 0.3 \ arcsecond[/tex]
The wavelength is [tex]\lambda = 700 \ nm = 700 *10^{-9 } \ m[/tex]
Generally the
1 arcminute = > 60 arcseconds
=> x arcminute => 0.3 arcsecond
So
[tex]x = \frac{0.3}{60 }[/tex]
=> [tex]x = 0.005 \ arcminutes[/tex]
Now
60 arcminutes => 1 degree
0.005 arcminutes = > z degrees
=> [tex]z = \frac{0.005}{60 }[/tex]
=> [tex]z = 8.333 *10^{-5} \ degree[/tex]
Converting to radian
[tex]\theta = z = 8.333 *10^{-5} * 0.01745 = 1.454 *10^{-6} \ radian[/tex]
Generally the resolution is mathematically represented as
[tex]\theta = \frac{1.22 * \lambda }{ D}[/tex]
=> [tex]D = \frac{1.22 * \lambda }{\theta }[/tex]
=> [tex]D = \frac{1.22 * 700 *10^{-9} }{ 1.454 *10^{-6} }[/tex]
=> [tex]D = 0.59 \ m[/tex]
Figure shows four paths along which objects move from a starting point to a final point, all im the same time interval. The paths pass over a grid of equally spaced straight lines. Rank the paths according to the average velocity of the objects.
Answer:
12345678901234567890
define alpha and beta
alpha is the excess return on an investment after adjusting for market related volatility and random fluctuations.
beta is a measure of volatility relative to a benchmark ,such as the S&P 500.
Explanation:
alpha and beta are two different parts of an equation used to explain the performance of stocks and investments funds. But in maths alpha and beta is the Greek alphabet
How does temperature rise and impurities affect the surface tension of water
(2 mks)
Answer:
Surface tension is the downward force acting on the surface of liquid due to presence of inter molecular forces or cohesive forces between the particles of liquid.
Surface tension decreases with increase in temperature as the forces among particles decrease due to increase in kinetic energy and thus the cohesive nature decreases and thus surface tension also decreases.
Surface tension may decrease or increase with increase in soluble impurities .Insoluble impurities decrease the surface tension.
A force of 100 newtons Is applled to a box at an angle of 36° with the horizontal. If the mass of the box Is 25 kilograms, what Is the horizontal
A 50.0-kg child stands at the rim of a merry-go-round of radius 2.25 m, rotating with an angular speed of 3.30 rad/s.. What is the child's centripetal acceleration?
Answer: the child's centripetal acceleration=24.50 m/s²
Explanation:
Given that mass of child= 50 kg
radius of merry go round= 2.25m
angular speed = 3.30 rad/s
Centripetal Acceleration = v²/ r
But V= ωr
So Centripetal Acceleration = v²/ r = (ωr)²/ r
=(3.30)² x (2.25)²/ 2.25 = (3.30)² x 2.25
=24.5025m/s²
=24.50 m/s²
If a 0.750M solution exerts an osmotic pressure of 22.5atm, what must be the temperature (in Kelvin) of the solution
Answer:
T = 365.58 K
Explanation:
Given that,
The concentration of solution, C = 0.750M
Osmotic pressure, P = 22.5 atm
We need to find the temperature of the solution.
The formula for the osmotic pressure is given by :
[tex]P=CRT[/tex]
Where
R is gas constant, [tex]R=0.08206\ L\ atm/mol-K[/tex]
[tex]T=\dfrac{P}{CR}\\\\=\dfrac{22.5}{0.75\times 0.08206}\\\\=365.58\ K[/tex]
So, the temperature of the solution is 365.58 K.
Bradley drops a rock in a well. It falls for 12 seconds. How deep is the well?
Two railway tracks are parallel to west east direction. Along one track, train A moves with a speed of 45 m/s from west to east, while along the second track, train B moves with a speed of 60 m/s from east to west . calculate speed of Bw.r.t. A
Answer:
(i) Relative velocity of B w.r.t A= Sum of speeds of trains
=54+90
=144kmph
(ii)Relative velocity of B w.r.t Ground(G)=v
B/G
=−90kmph
v
G
=0
Relative velocity of ground(G) w.r.t B =v
G/B
=v
G
−v
B/G
v
G/B
=0−(−90)
v
G/B
=90kmph
a boulder with a mass of about 1.5 x 10^5 kg falls and strikes the ground at 70 m/s how much kinetic energy dies the boulder deliver to the ground PLEASE HELP
Answer:
k. e= 1/2 mv^2
Ke = 1/2 * 1.5 * 10^5 * 70^2
3.675 *10^8 joules
The diameter of 0-gauge copper wire is 8.252 mm. Find the resistance of a 1.00-km length of such wire used for power transmission.
Answer:
The value is [tex]R = 0.321 \ \Omega[/tex]
Explanation:
From the question we are told that
The diameter is [tex]d = 8.252 \ mm = 0.008252 \ m[/tex]
The length of the wire is [tex]l = 1.0 \ km = 1000 \ m[/tex]
Generally the cross sectional area of the copper wire is mathematically represented as
[tex]A = \pi * \frac{d^2}{4}[/tex]
=> [tex]A = 3.142 * \frac{ 0.008252^2}{4}[/tex]
=> [tex]A = 5.349 *10^{ - 5} \ m^2[/tex]
Generally the resistance is mathematically represented as
[tex]R = \frac{\rho * l }{A }[/tex]
Here [tex]\rho[/tex] is the resistivity of copper with the value [tex]\rho = 1.72*10^{-8} \ \Omega \cdot m[/tex]
=> [tex]R = \frac{1.72 *10^{-8} * 1000 }{5.349 *10^{ - 5} }[/tex]
=> [tex]R = 0.321 \ \Omega[/tex]
How does the spring constant of the smaller springs relate to that of the original spring? Choose the correct explanation.
A) The spring constant of each half will be half the spring constant of the original long spring since it will stretch twice as much under the same tension
B) The spring constant of each half will be twice the spring constant of the original long spring since it will stretch twice as much under the same tension.
C) The spring constant of each half will be twice the spring constant of the original long spring since it will stretch only half as much under the same tension.
D) The spring constant of each half will be half the spring constant of the original long spring since it will stretch only half as much under the same tension.
Answer:
C) The spring constant of each half will be twice the spring constant of the original long spring since it will stretch only half as much under the same tension.
Explanation:
Hooke's law states that the force needed to extend or compress a spring by a distance is proportional to that distance. If is given as:
F = ke, where F is the force applied, k is spring constant and e is the extension.
If a force f is applied to a spring with a spring constant k and by a distance stretched (x) then:
k = F / x
For half the spring, if the same force F is applied, the stretch would be half (x/2), hence the spring constant C is:
C = F / (x/2)
C = 2 (F / x) = 2 * spring constant of original spring
O D. Both objects won't move at all. They will just stay where they were released.
3. A 46-gram golf ball and a 400-gram soccer ball were released at the same time from the top of a tall tower. What is the best explanation of this picture?
I
O A Heavier objects always fall faster than lighter objects.
O B. Lighter objects always fall faster than heavier objects
O C. The soccer ball was affected by air resistance less than the golf ball
O D. The soccer ball was affected by air resistance more than the golf ball.
Answer:
Do not see a picture or graph but suspect it would show the golf ball falling faster and striking the ground slightly before the soccer ball.
Probably D: Soccer ball was affected by air resistance more than the golf ball.
Explanation:
Even though heavier, friction loss of the greater surface area soccer ball will counter pull of gravity more than the compact golf ball.
In a vacuum, (no friction) both objects fall at the same rate regardless of mass.
What is the speed that is measured in speedometer to track speed violation?
Answer:
The officer's unit detects this 135-mile-per-hour speed and should subtract the patrol car's 70-mile -per-hour ground speed to get your true speed of 65 miles per hour. Instead, the officer's ground-speed beam fixes on the truck ahead and measures a false 50-mile-per-hour ground speed.
Explanation:
A speedometer or speed meter is a gauge that measures and displays the instantaneous speed of a vehicle. Now universally fitted to motor vehicles, they started to be available as options in the early 20th century, and as standard equipment from about 1910 onwards.
A child blows a leaf from rest straight up in the air. the leaf has a constant upward acceleration of magnitude 1.0 m by s square. how much time does it take the leaf to displace 1.0m upwards?
Answer:
√2
Explanation:
From the question, we're given that the
Acceleration of the leaf is 1 m/s²
Change in displacement of the leaf is 1 m/s.
Again, from the question, we can tell that the initial velocity u = 0, since the object starts at rest
Now, to solve this, we don't the equation of motion to ur
S = ut + 1/2at², substituting the whole parameters, we then have
1 = 0 * t + 1/2 * 1 * t²
1 = 1/2 * t²
t²/2 = 1
t² = 2
t = √2 seconds
Therefore the time it takes the leaf to dislodge is 2 seconds
Vary the sled’s height and mass. Observe the effect of each change on the potential energy of the sled.
a. How does potential energy change when height is increased?
b. How does potential energy change when mass is increased?
c. Compare a sled’s potential energy at 10 m to its potential energy at 20 m. How does doubling height affect potential energy?
d. Compare the potential energy of a 100-kg sled and a 200-kg sled at the same height. How does doubling mass affect potential energy?
Answer:
a. Potential energy of the sled is increased when height of sled is increased.
b. Potential energy of the sled is increased when height of sled is increased.
c. P.E₂₀ = 2 P.E₁₀
d. P.E₂₀₀ = 2 P.E₁₀₀
Explanation:
The potential energy of the sled can be given by the following:
[tex]Potential\ Energy = P.E = mgh\\[/tex]
where,
m = mass of sled
g = acceleration due to gravity
h = height of sled
a.
It is clear from the formula that potential energy of sled is directly proportional to the height of sled.
Therefore, potential energy of the sled is increased when height of sled is increased.
b.
It is clear from the formula that potential energy of sled is directly proportional to the mass of sled.
Therefore, potential energy of the sled is increased when mass of sled is increased.
c.
[tex]P.E\ at\ 10\ m:\\P.E_{10} = 10mg\\P.E\ at\ 20\ m:\\P.E_{20} = 20mg\\\frac{P.E_{20}}{P.E_{10}} = \frac{20mg}{10mg}[/tex]
P.E₂₀ = 2 P.E₁₀
d.
[tex]P.E\ at\ 100\ kg:\\P.E_{100} = 100gh\\P.E\ at\ 200\ m:\\P.E_{200} = 200gh\\\frac{P.E_{200}}{P.E_{100}} = \frac{200gh}{100gh}[/tex]
P.E₂₀₀ = 2 P.E₁₀₀
A boy standing at one end of a floating raft that is stationary relative to the shore walks to the opposite end of the raft, away from shore. As a consequence, the raft (a) remains stationary, (b) moves away from the shore, or (c) moves toward the shore. (Hint: Use Conservation of Momentum)
Answer:
(c) moves toward the shore.
Explanation:
Momentum can be defined as the multiplication (product) of the mass possessed by an object and its velocity. Momentum is considered to be a vector quantity because it has both magnitude and direction.
Mathematically, momentum is given by the formula;
[tex] Momentum = mass * velocity [/tex]
The law of conservation of momentum states that the total linear momentum of any closed system would always remain constant with respect to time.
In this scenario, a boy standing at one end of a floating raft that is stationary relative to the shore walks to the opposite end of the raft, away from shore. As a consequence, the raft moves toward the shore because the momentum of the closed system (boy and raft) has a zero magnitude and would remain constant.
What happens when a population exceeds its carrying capacity?
Answer:
If a population exceeds carrying capacity, the ecosystem may become unsuitable for the species to survive. If the population exceeds the carrying capacity for a long period of time, resources may be completely depleted.
A 0.046 kg golf ball hit by a driver can accelerate from rest to 67 m/s in 1 ms while the driver is in contact with the ball. How much average force does the golf ball experience
Answer:
Average force = 67 mn
Explanation:
Given:
Initial velocity u = 0 m/s
Final velocity v = 67 m/s
Time t = 1 ms = 0.001 sec.
Computation:
Using Momentum theory
Change in momentum = F × Δt
(v-u)/t = F × Δt
F × 0.001 = (67 - 0)/0.001
F= 67,000,000
Average force = 67 mn