(PLEASE HELP) You push really hard against a round rock, but you cannot make it roll. Which statement best explains why you cannot move the rock? A Gravity pulls the rock toward the center of Earth. B The forces between you and the rock are balanced. c The force of your push is greater than the opposing force. d There is no friction to help you move the object.

Answer: The crude oil will float on the surface of the ocean water.

Explanation:

The density of the crude oil can be calculated by dividing its mass by its volume:

Density = mass / volume

Since the crude oil spilled from a 5-liter container and has a mass of 4.10 kg, its density can be calculated as:

Density = 4.10 kg / 5 L

Density = 0.82 kg/L

The density of ocean water is given as 1.03 kg/L. Since the density of crude oil is less than that of ocean water, the crude oil will float on the surface of the water. This is because less dense substances float on top of denser substances. Therefore, the crude oil will float on the surface of the ocean water.

Taking into account the definition of Avogadro's Number, a box of paperclips contains 2.21×10²⁴ atoms of aluminum and 3.67 moles of aluminum.

Avogadro's number is a number that defines the amount of elements (which can be electrons, atoms, ions, molecules) found in one mole of a substance.

Its value is 6.023×10²³ particles per mole. Avogadro's number applies to any substance.

Then you can apply the following rule of three: if 6.023×10²³ atoms are contained in 1 mole of aluminum, then 2.21×10²⁴ atoms are contained in how many moles of aluminum?

amount of moles of aluminum= (2.21×10²⁴ atoms × 1 mole)÷ 6.023×10²³ atoms

amount of moles of aluminum= 3.67 moles

Finally, 3.67 moles of aluminum are present.

Learn more about Avogadro's Number:

brainly.com/question/11907018

#SPJ1

Answer:

Silicate minerals are the most common of Earth's minerals and include quartz, feldspar, mica, amphibole, pyroxene, and olivine. Silica tetrahedra made up of silicon and oxygen, form chains, sheets, and frameworks, and bond with other cations to form silicate minerals.

Explanation:n

Here, the metal A displaces metal B from its solution. Hence, the metal A has lower positive  reduction than B. Hence, the reduction potential of B is higher and it is less strong reducing agent.

The reduction potential of a metal electrode is the measure of the tendency of it to lose or gain electrons and is the equilibrium potential difference developed due to separation of charges at the metal - solution interface when a metal is kept in contact with solution of its own.

The higher the negative reduction potential, greater the reducing capacity of the metal. Hence, metals with higher positive potential are easily reducing or they are strong oxidizing agents.

The metals with strong reducing power displaces other metals with lower reducing power from their solution. Here, A is strong reducing agent. Hence, it can displace B from its salt solution and B reduces to its metallic form.

Therefore, the order of A and B in reducing their reduction capacity is A>B.

Find more on reduction potential:

https://brainly.com/question/23881200

#SPJ1

If Jake have type 1 diabetes then he needs insulin cells because his body cannot make insulin protein.

What is diabetes?

Diabetes is a chronic, metabolic disease characterized by elevated levels of blood glucose (or blood sugar), which leads over time to serious damage to the heart, blood vessels, eyes, kidneys and nerves.

The most common diabetes symptoms experienced by many people with diabetes are increased thirst, increased urination, feeling tired and losing weight. In Type 1 diabetes, body cannot make insulin whereas in type 2 diabetes, body can make insulin but can't use it properly.

Therefore, if Jake have type 1 diabetes then he needs insulin cells because his body cannot make insulin protein.

Learn more about diabetes, here:

https://brainly.com/question/30770821

#SPJ9

Answer:What is the main idea of climates

Explanation:

The main idea of climates is that they are long-term patterns of weather conditions in a particular region. Climate is determined by various factors such as latitude, altitude, topography, ocean currents, and prevailing winds. These factors influence the amount of solar radiation received by a region, the distribution of temperature and precipitation, and the types of vegetation and animal life that can thrive in that area.

Climate is typically classified into different types based on temperature and precipitation patterns. The most commonly used classification system is the Köppen climate classification system, which divides climates into five major groups: tropical, dry, temperate, continental, and polar. Each group is further subdivided into more specific climate types based on additional factors such as seasonality and humidity.

Understanding climate is important for a variety of reasons. It helps us predict weather patterns and natural disasters such as hurricanes and droughts. It also plays a critical role in agriculture, water management, and energy production. Additionally, climate change has become an increasingly important topic in recent years as human activities have led to significant changes in global climate patterns.

The given statement is false . Halley's comet takes 5 years to complete an orbit.

A comet that shines especially brightly is a superb comet. Big comets typically arrive once every ten years, at random, erratic periods.

This translates to a circumference of the solar orbit of around 7.6 billion miles. The gravitational pull of the planets causes the period to change from appearance to appearance.

Because Halley was the first comet to show astronomers that comets might return to our night skies repeatedly, it is frequently referred to as the most famous comet. The comet's appearances have now been connected by astronomers to observations made more than 2,000 years ago.

To know more about comet

https://brainly.com/question/12443607

#SPJ4

The complete question is

Halley's comet takes 5 years to complete an orbit. true or false.

Answer:

Answer = 'A' => Sodium Hydroxide (NaOH)

Explanation:

Aqueous electrolysis of salt solutions finds the salt ions in competition with electrolysis of water at the respective electrodes. That is, water can undergo reduction at the cathode as can the cation of the salt; while at the anode water can undergo oxidation as can the anion of the salt. The competing reactions are as follows:

Cathode:
Cation + electrons => Reduced form of metal in Basic Standard State

H₂O(l) + 2e⁻ ⇄ 2OH⁻(aq) + H₂(g)

Anode:  

Anion ⇄ Basic Standard State element + electrons

2H₂O(l) ⇄ O₂(g) + 4H⁺(aq) + 4e⁻

Na⁺ + e⁻ => Na⁰(s); εo = -2.71v

2H₂O(l) + 2e⁻ ⇄ 2OH⁻(aq) + H₂(g); εo = -0.83v (Dominant Rxn at cathode – more positive value)

At the Anode:

Cl⁻(aq) => Cl₂(g) + 2e⁻; εo = 1.36v

2H₂O(l) => O₂(g) + 4H⁺ + 4e⁻; εo = 1.23v (Dominant Rxn at anode – more positive value)

Since the more dominant reaction at the cathode produces hydroxide ions, the solution would become alkaline with Na⁺ ions already present. NaOH will effect the change in color of red litmus to blue. The gases produced in the half-reactions would have evaporated and not be present for flame test.  

The distinction can be determined by comparing the 'Standard Reduction Potentials' of the half-reactions. At the cathode (site of reduction), the more positive electrode potential will dominate while at the anode (site of oxidation) the more negative electrode potential will dominate.  

For NaCl(s) => Na⁺(aq) + Cl⁻(aq) finds the ions in competition with the oxidation and reduction reactions of water.  

At the Cathode:

Answer is 6m

because you can see the line for a to b. it's was key answer by 6m

The data is hereby plotted as attached.

To create a plot of the data, we can use a scatter plot with temperature (T) on the x-axis and density (d) on the y-axis. We can then circle the temperature(s) at which oxygen changes from liquid to gas.

Here's a Python code to create the plot:

# Data

T = [60, 70, 80, 90, 100, 120, 140]

d = [40.1, 38.6, 37.2, 35.6, 0.123, 0.102, 0.087]

# Circle the temperature(s) of phase change

plt.annotate('Liquid to gas', xy=(100, 0.123), xy= (120, 0.102), xy= (140, 0.087)

The resulting plot shows a clear change in density around 100, 120, 140 K, which corresponds to the temperature at which oxygen changes from liquid to gas. This is indicated by the line with the label "Liquid to gas" and the circle around the data point at (100, 0.123), (120, 0.102), (140, 0.087) .

learn more about liquid to gas: https://brainly.com/question/30817127

#SPJ1

Answer:

7.08 moles

Explanation:

To find the number of moles of copper in 450 grams, we need to divide the given mass by the molar mass of copper.

The molar mass of copper can be found on the periodic table, and it is approximately 63.55 grams per mole.

So, the number of moles of copper in 450 grams is:

450 grams / 63.55 grams per mole = 7.08 moles

1 and 2 are oxidation reactions.

An oxidation reaction is a type of chemical reaction that involves the transfer of electrons from one substance to another. Oxidation reactions are characterized by an increase in the oxidation state of a molecule, atom, or ion, resulting in a loss of electrons.

The substance that loses electrons is said to be oxidized, while the substance that gains electrons is said to be reduced.

Oxidation reactions play important roles in many chemical and biological processes, including energy production, metabolism, and corrosion.

Learn more about oxidation reaction:https://brainly.com/question/19528268

#SPJ1

Molarity of the solution with 6.72 g of NaCl dissolved in 2.14 liters is 0.051 mol per liter.

For more information on molarity kindly visit to

https://brainly.com/question/8732513

#SPJ1

Answer:

In order to determine the relative humidity from dry-bulb and wet-bulb thermometer readings, we need to use a psychrometric chart or a calculation based on the difference between the two temperatures.

In this case, the dry-bulb temperature and the wet-bulb temperature are the same (66°F). This indicates that the air is fully saturated with water vapor, meaning that the relative humidity is 100%.

When the dry-bulb and wet-bulb temperatures are the same, the air is said to be at its dew point temperature. At this temperature, the air is holding as much moisture as it can, and any additional cooling will cause condensation to occur. This is why surfaces can become covered in dew when the temperature drops at night.

In summary, when the dry-bulb temperature and the wet-bulb temperature are the same, the air is fully saturated with water vapor and the relative humidity is 100%.

The reaction's enthalpy change is -68496 J, or around -68.5 kJ.

The enthalpy of reaction for the chemical process using calorimetry:

q = -mCΔT

Where,

calculate the change in temperature:

ΔT = Tfinal - Tinitial = 57.4 °C - 25 °C = 32.4 °C

The mass of water in the calorimeter =

= mass of water = volume × density

= 500 mL × 1 g/mL = 500 g

The amount of heat transferred:

q = -mCΔT = -(500 g)(4.18 J/(g·K))(32.4 K)

= -68496 J

ΔH = -q = 68496 J     {Q is negative because the reaction generated heat. As a result, the reaction's enthalpy change (H) is also negative}

Hence, the reaction's enthalpy change is -68496 J, or around -68.5 kJ. Keep in mind that the enthalpy change for the quantity of reactants employed in the calorimetry experiment is represented by this value.

To know more about Enthalpy Reaction

https://brainly.com/question/1657608

#SPJ1

The  14g of impure calcium thiocarbonate reacts with hydrochloric acid 0.01 mole of carbon oxide gas evolved, 10% is the percentage purity.

What is reaction ?

The transformation of one or more reactants into one or more new products is referred to as a chemical reaction. Substances are made of chemical constituents or compounds. The transformation of one or more reactants into one or more new products is referred to as a chemical reaction. Substances are made of chemical constituents or compounds.

What is compound ?

A compound combines one or more additional substances to form a new product. The combination of two substances or elements is equal to the mass ratio for making that product. It is attached firmly, and they have equal in all ways to form a combination. The elements both are bonded together. Each compound has its chemical structure; if it breaks, it can either split into two atoms or molecules or in a single.

Therefore, The  14g of impure calcium thiocarbonate reacts with hydrochloric acid 0.01 mole of carbon oxide gas evolved, 10% is the percentage purity.

Learn more about reaction from the given link.

https://brainly.com/question/16416932

#SPJ1

A molecular formula is indeed a concise written description of an existing three-dimensional molecule. In below given ways chemical formula for the given chemical compound can be given.

A formula is just a scientific notation that uses atomic symbols as well as numerical subscripts to represent the variety and number of elements contained in a molecule.

A molecular formula is indeed a concise written description of an existing three-dimensional molecule.

a. di sulfur tetrafluoride                 S[tex]_4[/tex]F[tex]_8[/tex]

b. carbon trioxide                         CO[tex]_3[/tex]

c. nitrogen pentoxide                   N[tex]_2[/tex]O[tex]_5[/tex]

d. nitrogen tribromide,                 NBr[tex]_3[/tex]

e. dinitrogen hepta chloride         N[tex]_2[/tex]Cl[tex]_7[/tex]

Therefore, a molecular formula is indeed a concise written description of an existing three-dimensional molecule.

To know more about chemical formula, here:

https://brainly.com/question/29580302

#SPJ1

Simple interchange or replacement reactions, sometimes known as single displacement reactions, include the reaction ab + c ac + b.

It involves the reaction of starting materials, ab and c, to produce newer goods, ac and b. In this process, the metal c takes the position of the component b in the combination ab, causing the expulsion of the metal b and the creation of the new compound ac.

For instance, the process can be characterized as Zn + CuSO4 CuZn + ZnSO4 if ab indicates copper sulphate (CuSO4) and b symbolizes zinc (Zn).

Copper-zinc alloy, the resultant product, precipitates out of the solution as a solid precipitate and is known as CuZn. A more electronegative element replaces a less strongly adsorbed in a reaction of this kind.

Learn more about reaction here:

https://brainly.com/question/28984750

It should be 0.789 moles because we started with 28.8 g x 1 mol/36.5 g = 0.789 moles

Optimizing the PCR annealing temperature and MgCl2 concentration can also help minimize primer-dimer formation.

What is PCR?

PCR stands for Polymerase Chain Reaction, which is a laboratory technique used to amplify specific DNA sequences. PCR enables the amplification of a small amount of DNA into millions or billions of copies, allowing researchers to study DNA samples even when only a small amount of starting material is available.

PCR works by using a heat-stable DNA polymerase enzyme to copy a targeted DNA sequence in a series of repeated cycles of heating and cooling. The process involves three main steps: denaturation, annealing, and extension.

Primer-dimer formation is more likely to occur in a PCR reaction that uses long primers.

Longer primers have a higher likelihood of binding to each other through complementary base pairing, forming a primer-dimer. This can occur when the primers anneal to each other rather than to the template DNA. The resulting primer-dimer complex can then be extended by the DNA polymerase during subsequent PCR cycles, leading to the amplification of an unintended product that appears as a smaller band on the gel.

Learn more about PCR from given link

https://brainly.com/question/7177771

#SPJ1

M=6.71mol2L=2. 5mol/L. 23.5 m o l / L . Hence, the correct that is 2.5M is the molarity of a solution that contains 6.71 moles of solute in 23.5 L of solution

A solution's molality (m) is defined as the moles of solute divided by the kilograms of solvent. A "one-molal" solution of sodium chloride is one that comprises 1.0mol of NaCl dissolved in 1.0kg of water. Molality is represented by an italicized lower-case m.

A solution's molality equals the moles of solute divided by the mass of solvent in kilograms, whereas its molarity equals the moles of solute divided by the volume of solution in liters.

learn more about solution's molality

https://brainly.com/question/24065939

#SPJ1

Advancements in chemistry have played a critical role in advancing technology in a number of ways such as ;

Overall, advancements in chemistry are essential for developing new technologies and improving existing ones. By understanding the fundamental properties of materials and substances, chemists can create new materials with unique properties and develop new technologies that can improve our lives.

In term of Energy, Chemistry is crucial for developing new forms of energy, including renewable energy sources like solar, wind, and biofuels. Chemistry also plays a vital role in energy storage, such as the development of high-capacity batteries and fuel cells.

In term of Pharmaceuticals, Chemistry is essential for developing new drugs and improving existing ones. For example, the development of new cancer drugs has revolutionized cancer treatment, and new antibiotics have been developed to combat drug-resistant bacteria.

In term of Nanotechnology, Chemistry is critical for the development of nanotechnology, which involves working with materials at the nanoscale. Nanotechnology has many potential applications, including in electronics, medicine, and energy storage.

Learn more about technology at:

https://brainly.com/question/25110079

#SPJ1

Answer:

Sugar and carbon dioxide have different solubilities in water due to their different chemical properties and intermolecular forces.

Sugar (sucrose) is a polar molecule that can form hydrogen bonds with water molecules. This allows sugar to dissolve readily in water, as the water molecules surround the sugar molecules and form a solution. However, the solubility of sugar in water is limited, as the water molecules can only form a certain number of hydrogen bonds with the sugar molecules. This is why, for example, if you add too much sugar to a cup of water, the excess sugar will not dissolve and will settle at the bottom of the cup.

Carbon dioxide (CO2), on the other hand, is a nonpolar molecule that does not have a charge distribution that allows it to interact strongly with water molecules through hydrogen bonding. Instead, carbon dioxide dissolves in water through weak intermolecular forces, such as van der Waals forces, which arise from temporary dipoles that form as the molecules move and interact with each other. These weak interactions make carbon dioxide only moderately soluble in water, and the solubility decreases as the temperature increases or the pressure decreases.

In summary, the solubility of sugar and carbon dioxide in water depends on the chemical properties and intermolecular forces of the substances, with sugar being more soluble due to its polar nature and ability to form hydrogen bonds with water, and carbon dioxide being less soluble due to its nonpolar nature and weak intermolecular interactions with water.

Explanation:

The compound is an acid

H2SO4, or sulfuric acid, is an acid because it donates protons (H+ ions) in aqueous solution. When H2SO4 is dissolved in water, it dissociates into hydrogen ions (H+) and sulfate ions (SO4 2-).

The hydrogen ions are the source of the acidity in the solution, as they can react with water molecules to form hydronium ions (H3O+). The hydronium ions are responsible for the characteristic sour taste and corrosive properties of acids.

Sulfuric acid is used in a wide range of industrial processes, including the production of fertilizers, detergents, and chemicals.

Learn more about acid:https://brainly.com/question/14072179

#SPJ1

The molar flow rate of feed Fao = 2.5 mol/min

Performance equation for cstr gas phase first order reaction with conversion Xa = 0.9

A --> B + 2C

Volume expansion factor E =( 3-1)/1 = 2

Reaction rate constant at 50 C, k1 = 10-4 min-1

Activation energy Ea = 85 kj/mol

Entering pressure P= 10 atm

Temperature T2 = 127 C = 400k

Cao = P2/RT2 = 10 atm/(0.0821L.atm/mol.k)*400k = 0.3045 mol/L

By Arrhenius equation

Ln(k2/k1) = Ea/R *(1/T1 - 1/T2)

Ln(k2/10-4) = 85000/8.314*(1/323 - 1/400)

k2 = 1.77*10-4 min-1

The molar flow rate of feed Fao = 2.5 mol/min

Performance equation for cstr gas phase first order reaction with conversion Xa = 0.9

V/Fao = *Xa/(-rA) = Xa(1+EXa)/kCao(1-Xa)

V = Fao*Xa(1+EXa)/k2Cao(1-Xa)

V = 2.5*0.9(1+2*0.9)/1.77*10-4*0.3045(1-0.9)

V = 1168881 L = 1168.88 m3

volume of the reactor V = 1168.88m3

space time of the reactor,

Tou = V/vo = VCao/Fao= 1168881L*(0.3045mol/L)/(2.5mol/min) = 142369.74 min

b) reaction is reversible then,

Kc = [B][C]2/[A]

Kc = 0.025 mol2/dm6

Kc = CaoXae * (2*CaoXae)2/Cao(1-Xae)

0.025 = 4*0.30452Xae3/(1-Xae)

Xae3/(1-Xae) = 0.066

Put Xae = 0.35then it satisfies above equation

0.353/(1-0.35) = 0.0659

equilibrium conversion Xae = 0.35

Read more about molar flow rates here:

https://brainly.com/question/13348162

#SPJ1

According to IUPAC nomenclature, the longest chain of this compound contains 7 carbons. Hence, the name of this compound is 4 -propyl-5-ethyl-5-phenyl heptane.

IUPAC rules are used to name the organic compounds. As per this rule, the compound is named based on the chain containing highest number of carbon atoms. The substituents are named with their prefix or suffix.

For the given compound, the longest chain contains 7 carbon atoms. Hence, the chain is named as heptane. The substituents are numbered in such a way that, they have the least possible number.

The 4th carbon contains a propyl group and a phenyl group and ethyl groups are attached on the 5th position in the longest chain. Therefore, the name of the compound is  4 -propyl-5-ethyl-5-phenyl heptane.  

Find more on IUPAC rules:

https://brainly.com/question/27915542

#SPJ1

Answer:

The oxygen atom in water is partially negative and the hydrogen atoms are partially positive. In ethanol, the oxygen atom is partially negative and the carbon and hydrogen atoms are partially positive.