Please help me!!!I will give full stars and points!!!

Atoms are made up of three subatomic particles: protons, neutrons, and electrons. Protons are positively charged particles found in the nucleus of an atom.

They have a mass of approximately 1 atomic mass unit (AMU). Neutrons, also found in the nucleus, have no charge and have a mass of approximately 1 amu. Electrons are negatively charged particles that orbit around the nucleus in shells or energy levels. They have a much smaller mass than protons and neutrons and are responsible for chemical reactions and bonding between atoms. Understanding the properties and behaviors of these subatomic particles is crucial in understanding the nature of matter and the physical world around us.

Find out more about subatomic particles

at brainly.com/question/19818822

#SPJ4

There are 3.6312 x 10²⁴ atoms in 6 moles of KCIO3 because there are 6 moles of KCIO3 and 6.022 x 10²³ atoms per mole.

Potassium One atom of potassium, three atoms of oxygen, and one atom of chlorine make up the inorganic substance chlorate.

The molar mass of KCIO3 is:

K = 39.10 g/mol

Cl = 35.45 g/mol

I = 126.90 g/mol

O3 = (16.00 x 3) g/mol = 48.00 g/mol

Molar mass of KCIO3 = K + Cl + I + 3O3

= 39.10 + 35.45 + 126.90 + 3(48.00)

= 307.35 g/mol

6 KCIO3 = 6 moles KCIO3

Number of atoms = 6 moles [tex]KCIO3 x 6.022 x 10^23[/tex] atoms/mol

[tex]= 3.6312 x 10^24 atoms[/tex]

To know more about atoms  visit:-

https://brainly.com/question/30898688

#SPJ1

The following are categorized into isometric and isotonic:
Isometric: Pushing constantly against a concrete wall, Holding a bench-press bar in the same position, Doing a plank exercise (holding a push-up position), and Balancing on tiptoes.

Isotonic: Running up a hill, Swimming freestyle, Pedaling a bicycle on a flat surface, and Doing bicep curls.

Isometric exercises are exercises where a muscle or group of muscles contracts without any change in length. These exercises involve the muscle or group of muscles contracting against an immovable object or against an opposing force. Examples of isometric exercises are pushing against a wall, holding a plank, and doing a wall sit.

Isotonic exercises are exercises that involve the muscle or group of muscles contracting against resistance, and causing a change in the muscle’s length. These exercises involve the muscle or group of muscles contracting and then extending against a fixed weight or external force.

Examples of isotonic exercises are running up a hill, swimming freestyle, pedaling a bicycle on a flat surface, doing bicep curls, and doing leg extensions.

1. Pushing constantly against a concrete wall - Isometric Exercise
2. Running up a hill - Isotonic Exercise
3. Swimming freestyle - Isotonic Exercise
4. Pedaling a bicycle on a flat surface - Isotonic Exercise
5. Holding a bench-press bar in the same position - Isometric Exercise
6. Doing a plank exercise (holding a push-up position) - Isometric Exercise
7. Balancing on tiptoes - Isometric Exercise
8. Doing bicep curls - Isotonic Exercise

To know more about isometrics refer here:

https://brainly.com/question/27999637#

#SPJ11

The given statement is true. Zeolites hypothetically can be made attractive by adding sodium particles to them. Zeolites are utilized as sponges just and have no different purposes.

A compelling method for testing how much red color is in a watery arrangement is to gauge how much red light (620-750 nm) is consumed by the arrangement.

The expression "zeolite" was first utilized in the year 1756 by Axel Fredrik Cronstedt, a Swedish mineralogist. During a course of quickly warming a material that was seen to be stilbite, it delivered a lot of steam. This was because of the water that the material had retained before. Subsequent to seeing such turns of events, he authored the term zeolite. It has been gotten from the Greek words, ζέω (zéō), signifying "to bubble" and λίθος (líthos), signifying "stone".

Engineered zeolites are normally blended by a course of slow crystallization of a silica-alumina gel within the sight of salts and natural layouts. Curiously, various designs could be made utilizing this interaction. Aside from varieties in structures, zeolites can be fabricated or produced using different iotas making them synthetically fascinating and dynamic. For example, purported heteroatoms incorporate germanium, iron, gallium, boron, zinc, tin, and titanium.

to know more Zeolites click here:

https://brainly.com/question/14976531

#SPJ4

The oxidation number of manganese (Mn) in potassium permanganate (KMnO4) is B.  +7.

Potassium permanganate is a strong oxidizing agent that is commonly used in organic chemistry to oxidize alcohols, aldehydes, and ketones to carboxylic acids. Its formula is KMnO4.The oxidation state of manganese in KMnO4 is determined by subtracting the sum of the oxidation states of potassium, oxygen, and hydrogen from the overall charge of the molecule. The oxidation state of potassium is +1, and the oxidation state of oxygen is -2. Hydrogen's oxidation state is +1, and it is usually removed from the organic compound in question, so it is not included in the final calculation. For KMnO4, the overall charge is -1. Using this information,

we can calculate the oxidation state of manganese as follows: Oxidation state of Mn + Oxidation state of K + 4(Oxidation state of O) = -1Oxidation state of Mn + 1 + 4(-2) = -1Oxidation state of Mn - 7 = -1 Oxidation state of Mn = +7Therefore, the oxidation state of manganese in potassium permanganate is +7. Therefore the correct option is B

The complete question is :

What is the oxidation number of manganese (MN) in potassium permanganate (KMnO4)?

A. +5,

B. +7,

C. +8,

D. +9

Know more about oxidation number here:

https://brainly.com/question/30770473

#SPJ11  

c. Easily Gain Electrons. Easily Gain Electrons belongs to metal elements.

Metal elements are characterized by having relatively low ionization energies and high electronegativities. This allows them to easily gain electrons from other elements in chemical reactions.Metals are chemical elements that are characterized by their ability to conduct electricity, have a metallic luster, and are malleable and ductile. They are divided into two main categories: ferrous metals, which contain iron, and non-ferrous metals, which do not.An atom can easily gain electrons by participating in a redox reaction. This is when electrons are transferred between two atoms, and the atom that receives the electrons gains them.

learn more about Metal elements Refer:brainly.com/question/17085815

#SPJ1

AgCl (silver chloride) is most soluble in a solution that is 0.20 M in  AgNO₃. Option B is correct.

Solubility is the property of a substance to dissolve in a solvent to form a homogeneous solution. It is typically measured as the maximum amount of a solute that can dissolve in a given amount of solvent at a specific temperature and pressure. The solubility of a substance depends on various factors, such as temperature, pressure, solvent, and the presence of other solutes in the solution.

AgCl is sparingly soluble in water, but its solubility can be increased by the presence of common ions such as Ag⁺ from AgNO₃. The addition of Ca₂⁺ or K⁺ ions from CaCl₂ or KNO₃ will not have a significant effect on the solubility of AgCl.

Hence, B. in a solution that is 0.20 M in AgNO₃ is the correct option.

To know more about Solubility here

https://brainly.com/question/22185953

#SPJ4

Rounded to the nearest tenth, answer is 0.5 moles of water.

Mass of a chemical compound divided by its amount of the substance measured in moles is molar mass.

Molar mass of HNO3 = 1(1.008) + 1(14.01) + 3(16.00) = 63.01 g/mol

Number of moles of HNO3 = 158.2 g / 63.01 g/mol = 2.51 mol

From the balanced equation, we see that 4 moles of water are produced for every 3 moles of Cu consumed. Therefore, number of moles of water produced is as:

2.51 mol HNO3 × (4 mol H2O / 8 mol HNO3) × (3 mol Cu / 8 mol HNO3) = 0.4719 mol H2O

Rounded to the nearest tenth, answer is 0.5 moles of water.

To know more about molar mass, refer

https://brainly.com/question/837939

#SPJ1

The ion with the smallest number of unpaired electrons is Ni2+.

The number of unpaired electrons in an ion depends on its electronic configuration, specifically the number of electrons in its partially filled d-orbitals.

Out of the given ions, V2+ and Cr2+ have the electronic configurations [Ar] 3d3 and [Ar] 3d4 respectively, and both have three unpaired electrons.

Ni2+ has the electronic configuration [Ar] 3d8, and it has two unpaired electrons.

Co2+ has the electronic configuration [Ar] 3d7, and it has three unpaired electrons.

Fe3+ has the electronic configuration [Ar] 3d5, and it has five unpaired electrons.

Therefore, Ni2+ has the smallest number of unpaired electrons among the given ions with two unpaired electrons.

More on unpaired electrons can be found here: https://brainly.com/question/29858800

#SPJ1

The partial pressure of nitrogen is 0.116 atm and the partial pressure of helium is 0.583 atm.

To find the partial pressures of nitrogen and helium, we can use the fact that the total pressure of the mixture is equal to the sum of the partial pressures of each component:

P_total = P_O2 + P_He + P_N2

We are given the partial pressure of oxygen as P_O2 = 0.300 atm. We can find the total number of moles of gas in the mixture as:

n_total = n_O2 + n_He + n_N2 = 1.50 mol + 2.50 mol + 0.500 mol = 4.50 mol

We can use the mole fraction of each component to find the partial pressure of nitrogen and helium.

X_N2 = n_N2 / n_total = 0.500 mol / 4.50 mol = 0.111

X_He = n_He / n_total = 2.50 mol / 4.50 mol = 0.556

The mole fraction of oxygen is then:

X_O2 = n_O2 / n_total = 1.50 mol / 4.50 mol = 0.333

We can use these mole fractions to find the partial pressures of nitrogen and helium:

P_N2 = X_N2 * P_total = 0.111 * P_total

P_He = X_He * P_total = 0.556 * P_total

Substituting the given value for P_O2 and adding the expressions for P_N2 and P_He, we get:

P_total = P_O2 + P_N2 + P_He

P_N2 + P_He = P_total - P_O2 = (1.000 atm - 0.300 atm) = 0.700 atm

Substituting the expressions for P_N2 and P_He in terms of mole fractions, we get:

0.111 * P_total + 0.556 * P_total = 0.700 atm

0.667 * P_total = 0.700 atm

P_total = 1.049 atm

Now we can use the expressions for P_N2 and P_He in terms of mole fractions to find their partial pressures:

P_N2 = 0.111 * P_total = 0.116 atm

P_He = 0.556 * P_total = 0.583 atm]

Learn more about moles here:

https://brainly.com/question/28239680

#SPJ1

According to the octet rule, atoms tend to achieve eight electrons in their outermost shell. So the correct answer is C. eight.

The octet rule is a chemical rule of thumb that states that atoms of low atomic number tend to combine in such a way that they each have eight electrons in their valence shells, giving them the same electronic configuration as a noble gas. The rule is applicable to the main-group elements, especially carbon, nitrogen, oxygen, and the halogens. It is based on the observation that when atoms have eight electrons in their outermost shell, they are chemically stable and less likely to react with other atoms.

Learn more about atoms here: brainly.com/question/30898688

#SPJ4

We can use the solubility product constant (Ksp) for lead(II) chloride, which is 1.17 x 10-5 to determine the concentration of the lead ion (Pb2+) that must be exceeded to precipitate PbCl2 from a 1.00 x 10-2 M solution of chloride ions (Cl-).

The equilibrium constant for a solid material dissolving in an aqueous solution is denoted by the solubility product constant, which is abbreviated as Ksp. It is a measurement that indicates how much of a solute may be dissolved in a solution. The Ksp value of a material is greater when it has a higher degree of solubility.

The dissociation reaction for PbCl2 in water is:
PbCl2(s) ⇌ Pb2+(aq) + 2Cl-(aq)

The Ksp expression for this reaction is:
Ksp = [Pb2+][Cl-]^2

We are given the concentration of Cl- as 1.00 x 10^-2 M. Let [Pb2+] = x, so we can plug in the values into the Ksp expression:
1.17 x 10^-5 = x(1.00 x 10^-2)^2

Now, solve for x:
x = (1.17 x 10^-5) / (1.00 x 10^-2)^2
x ≈ 1.17 x 10^-1

Therefore, the concentration of lead ion (Pb2+) that must be exceeded to precipitate PbCl2 from the solution is approximately 1.17 x 10^-1 M.

To know more about the Ksp https://brainly.com/question/27132799

#SPJ11

The specific rotation of the carbohydrate is 12.27 when observed rotation is 2.70 degrees at a concentration of 0.022 g/ml in a 1 dm cell

The specific rotation, denoted by [α], is a measure of the ability of a compound to rotate plane-polarized light and is defined as the observed rotation in degrees divided by the concentration in grams per milliliter and the path length in decimeters.

Mathematically, we can express it as:

[α] = observed rotation / (concentration x path length)

In this problem, we are given:

observed rotation = 2.70 degrees

concentration = 0.022 g/mL

path length = 1 dm = 10 cm

Substituting these values into the formula, we get:

[α] = 2.70 degrees / (0.022 g/mL x 10 cm)

[α] = 2.70 degrees / 0.220 g/cm³

[α] = 12.27

Learn more about the specific rotation here.https://brainly.com/question/18523033

#SPJ11

The initial concentration of the HCl solution was 0.1251 M.

The balanced chemical equation for the reaction between hydrochloric acid (HCl) and sodium hydroxide (NaOH) is:

HCl + NaOH → NaCl + H2O

We can use the balanced equation and the volume and concentration of the NaOH solution to calculate the number of moles of NaOH used in the titration:

moles of NaOH = volume of NaOH x concentration of NaOH

moles of NaOH = 0.02746 L x 0.1138 mol/L

moles of NaOH = 0.003127 mols

Since HCl and NaOH react in a 1:1 ratio, the number of moles of HCl used in the titration is also 0.003127 moles.

Now, we can use the number of moles of HCl and the volume of HCl to calculate the initial concentration of HCl:

moles of HCl = concentration of HCl x volume of HCl

0.003127 mol = concentration of HCl x 0.02500 L

concentration of HCl = 0.1251 M

Therefore, the initial concentration of the HCl solution was 0.1251 M.

Learn more about molarity on:

https://brainly.com/question/14469428

#SPJ11

Answer:

A Single replacement/displacement reaction will occur, making the equation:

Calcium + Lead (II) nitrate → Calcium Nitrate + Lead (II)

Ca + Pb(NO3)2 → Ca(NO3)2 + Pb

Explanation:

Calcium is more reactive than Lead in the reactivity series so theoretically will replace in Lead in Lead Nitrate, forming Calcium Nitrate.

Hopefully this helps!!!

In the solid phase, the atoms of a substance are closely packed together and held in a fixed position by intermolecular forces. In the case of ice, which is a solid form of water, the atoms are arranged in a regular pattern, forming a crystal lattice structure.

The motion of atoms in the solid phase is limited to small vibrations around their fixed positions. These vibrations are caused by thermal energy, but they are not significant enough to overcome the intermolecular forces that hold the atoms in place. As a result, the shape of the solid, including ice, is definite and maintains a fixed shape.

The volume or amount of space taken up by a solid, including ice, is also definite. The intermolecular forces between the atoms prevent them from moving around freely, and as a result, the solid has a fixed volume.

Overall, in the solid phase, such as ice, the arrangement of atoms is regular and fixed, and their motion is limited to small vibrations around their fixed positions. The volume or amount of space taken up is definite, and the shape is also definite and maintains a fixed shape.

To learn more about atoms refer to:

brainly.com/question/30898688

#SPJ4

Aldohexoses have four chiral focuses and, in this way, 24 = 16 isomers. There will be eight d-isomers and eight l-isomers. Thusly, the quantity of enantiomer matches is 8 (2n−1).

An aldohexose has four chiral focuses.

So there are

24=16

optical isomers.

Their perfect representations are the L-aldohexoses, the other 8 of the 16.

Their names are L-allose, L-altrose, L-glucose, and so on.

Consequently, every one of the 16 aldohexoses has its own name.

The four chiral focuses in glucose show there might be upwards of sixteen (24) stereoisomers having this constitution. These would exist as eight diastereomeric sets of enantiomers, and the underlying test was to figure out which of the eight related to glucose. This challenge was acknowledged and met in 1891 by German physicist Emil Fischer. His fruitful exchange of the stereochemical labyrinth introduced by the aldohexoses was a sensible masterpiece, and it is fitting that he got the 1902 Nobel Prize for science for this achievement. At the time Fischer embraced the glucose project laying out the outright setup of an enantiomer was unrealistic. Thusly, Fischer pursued an erratic decision for (D)- glucose and laid out an organization of related aldose setups that he called the D-family. The identical representations of these arrangements were then assigned the L-group of aldoses. To represent utilizing present-day information, Fischer projection formulas and names for the D-aldose family (three to six-carbon atoms) are displayed underneath, with the uneven carbon atoms (chiral focuses) hued red.

to know more about glucose click here:

https://brainly.com/question/397060

#SPJ4

Answer:

Explanation:

The main reason why California has areas that are colder than Nevada, despite being at similar latitudes, is due to the influence of ocean currents. Specifically, California is impacted by a cold ocean current known as the California Current, which flows southward along the western coast of North America, while Nevada is an inland state without access to any major ocean currents.

The California Current brings cool water from the Gulf of Alaska down the coast, resulting in lower temperatures along the California coast, particularly in the northern regions. In contrast, Nevada has a desert climate with high temperatures and low humidity, due to its inland location and lack of major bodies of water.

So, the correct option would be "Cold ocean currents travel across California." (Option 2).

Understanding matter and its properties helped humans move from the stone age to the iron age by enabling them to develop new materials and technologies. In the stone age, humans used materials such as stone, bone, and wood to create tools and weapons. However, these materials had limitations in terms of their strength, durability, and ability to hold a sharp edge.

As humans began to understand the properties of matter, they were able to experiment with new materials and processes. For example, they learned that by heating certain rocks, they could extract metals such as copper and tin, which could be used to create stronger tools and weapons. By combining copper with tin, they discovered that they could create bronze, which was even stronger and more durable.

Eventually, humans discovered how to extract iron from iron ore and use it to create even stronger tools and weapons. This knowledge of matter and metallurgy enabled humans to advance technologically and culturally, leading to the development of civilizations and the rise of empires.

In summary, understanding the properties of matter helped humans move from the stone age to the iron age by enabling them to experiment with new materials and develop new technologies. This process of discovery and innovation continues to this day, as scientists and engineers continue to push the boundaries of our knowledge and understanding of the natural world.

the correct option is D. between 7 and 14 best describes the pH at the equivalence point of a titration of a weak base with a strong acid.

The pH at the equivalence point of a titration of a weak base with a strong acid is somewhere in the range of 7 and 14. At the equivalence point, the quantity of moles of the base is equivalent to the number of moles of acid added. The pH at the equivalence point depends on the strength of the weak base. On the off chance that the weak base is exceptionally weak, the pH at the equivalence point will be closer to 7.0. If the weak base is stronger, the pH at the equivalence point will be closer to 14.0.

A weak base is a substance that, when dissolved in water, does not break totally into its constituent ions. Weak bases have some other properties, such as their solutions being unfortunate conductors of power. They are also categorized as weak electrolytes. Examples of weak bases incorporate smelling salts (NH3), pyridine (C5H5N), and trimethylamine (N(CH3)3).

to know more about strong acids click here:

https://brainly.com/question/30782679

#SPJ4

Answer:

we have a certain amount of Cl2 and want to calculate how much CCl4 we need, we would use the ratio of 1 mole of CCl4 for every 2 moles of Cl2.

Explanation:

The balanced chemical equation for the reaction of CCl4 to Cl2 is:

CCl4 → 2Cl2

From the equation, we can see that for every one molecule of CCl4, two molecules of Cl2 are produced.

This means that the molar ratio of CCl4 to Cl2 is 1:2.

In other words, if we start with one mole of CCl4, we would expect to produce two moles of Cl2. Conversely, if we have a certain amount of Cl2 and want to calculate how much CCl4 we need, we would use the ratio of 1 mole of CCl4 for every 2 moles of Cl2

A limiting reagent refers to the reagent present in a reaction that will limit the quantity of product generated. The yield of a reaction is calculated by calculating the percent yield. The percent yield is a percentage representation of the number of products generated by a reaction compared to the amount of product that should be generated based on stoichiometry or the total number of products that should be generated in the absence of loss or side reactions.

In cases where a reagent other than styrene is the limiting reagent, the presumptions made for the calculations become invalid, and hence the calculated results become inaccurate or unreliable. The reason why a reagent other than styrene could become the limiting reagent is as follows:

To learn more about "percent yield", visit:  https://brainly.com/question/30944610

#SPJ11

The pressure in a region of outer space where there is 1 molecule/cm3 and the temperature is 3 K would be 3.91 x 10^-23 Pa.

In a region of outer space where there is 1 molecule/cm3 and the temperature is 3 K, we can use the ideal gas law to calculate the pressure. However, it is important to note that the ideal gas law assumes that the gas molecules are in constant motion and interact with each other through perfectly elastic collisions, which may not be entirely accurate for outer space conditions.

The ideal gas law is given by:

PV = nRT

where P is the pressure in pascals (Pa), V is the volume in cubic meters (m3), n is the number of moles of gas, R is the gas constant (8.314 J/(mol·K)), and T is the temperature in Kelvin (K).

We are given that there is 1 molecule/cm3 in this region of outer space. This can be converted to the number of moles of gas using Avogadro's number:

1 molecule/cm3 = 1.66 x 10^-24 mol/m3

The volume can be assumed to be very large since we are in outer space, so we can approximate it as infinity (i.e., V = ∞).

Now we can plug in the values:

PV = nRT

P(∞) = (1.66 x 10^-24)(8.314)(3)

P = 3.91 x 10^-23 Pa

Therefore, the pressure in a region of outer space where there is 1 molecule/cm3 and the temperature is 3 K is approximately 3.91 x 10^-23 Pa.

More on ideal gas can be found here: https://brainly.com/question/3961783

#SPJ1

A separating funnel can separate two immiscible liquids, oil and water. Because oil and water are fully insoluble in one other, they split into two distinct layers. The upper layer is made up of oil, whereas the lower layer is made up of water.

Or you could simply remove the oil layer from the top by pouring it into another vessel, which leaves you with the water layer at the bottom.

Answer:

same

Explanation:

the first answer is correct

Yes, He gas molecules and Xe gas molecules have the same average kinetic energy at the same temperature. This is known as the principle of equipartition of energy.

The kinetic energy of gas molecules is proportional to the absolute temperature, as per the kinetic theory of gases, which states that gases are made up of a large number of small particles that are in constant, random motion.

Gas molecules collide with each other and with the walls of the container in which they are placed as a result of this movement. The average kinetic energy of a gas molecule is proportional to the absolute temperature, which is the sum of the kinetic energies of all the gas molecules divided by the total number of molecules in the gas.

The kinetic energy of a molecule can be measured using the following equation:

KE = (1/2)mv²

Where,

Kinetic energy (KE)

m = Mass of the molecule

v = Velocity of the molecule.

Learn more about kinetic theory of gases here: https://brainly.com/question/30002049

#SPJ11

Claim: According to the rule of conservation of mass, a chemical reaction's mass remains constant since the number of atoms present before and after the reaction is equal.

Evidence: Maria is correct because the chemical reaction's total reactants and total products are equal. The mass of the resulting chemicals is equal to that of the reactants.

The law of conservation of mass stipulates that atoms are neither formed, destroyed, or altered during a chemical reaction, which is why this is the case.

Word bank: number of atoms following a chemical reaction, the sum of products, not generated, amount of reactants, unchanged, reactants have the same mass, Reasoning, the mass will remain the same, assertion, and proof

The claim is made in reference to the law of conservation of mass, which stipulates that the total mass of the reactants and the total mass of the products created in a chemical reaction are equal.

This law suggests that throughout a chemical reaction, atoms are neither generated nor destroyed.

The fact that the number of atoms before and after a chemical reaction is equal is used as evidence to back up this assertion.

This is so because the total of the reactants, or the substances that first participate in the reaction, must match the total of the products. (the substances formed as a result of the reaction).

Therefore, in order for the rule of conservation of energy to apply, the masses of the reactants and products must be equal.

learn more about conservation of mass here

https://brainly.com/question/15289631

#SPJ1

The concentration of strontium hydroxide [tex]Sr(OH)2[/tex] is zero at this point in the titration, so it does not contribute to the pH calculation.

To determine the pH of the solution at a particular point in the titration [tex]HC4H7O2[/tex], we need to construct a BCA (before, change, after) table and an ICE (initial, change, equilibrium) table.

The balanced chemical equation for the reaction is

[tex]2 HC4H7O2 + Sr(OH)2 → Sr(C4H7O2)2 + 2 H2O[/tex]

[tex]BCA Table:Reactant | HC4H7O2 | Sr(OH)2Initial | x | yChange | -2x | -yAfter | x-2x | y-y[/tex]

In the BCA table, we assume that x moles of Butyric acid [tex]HC4H7O2[/tex] and y moles of [tex]Sr(OH)2[/tex] are present in the reaction mixture. Since the stoichiometric coefficient  [tex]HC4H7O2[/tex] is 2 in the balanced equation, the change in its concentration is -2x moles, while for strontium hydroxide [tex]Sr(OH)2[/tex], it is -y moles. The final concentration of Butyric acid [tex]HC4H7O2[/tex] is (x-2x) moles and that of strontium hydroxide [tex]Sr(OH)2[/tex] is (y-y) moles.

From the ICE table, we can see that the initial concentration of Butyric acid [tex]HC4H7O2[/tex] is x moles and the concentration of[tex]H3O+[/tex] produced is 2x moles. Therefore, the pH at this point in the titration can be calculated as follows:

[tex]pH = -log[H3O+][H3O+] = 2x / V[/tex]

where V is the volume of the solution.

To learn more about pH please visit-
https://brainly.com/question/15289741
#SPJ1

Answer:

15. Flow

16. Volume

Explanation:

That must be the right answer