Please help me with this problem​

Answer:

negatively charged particle

valence electron  is a electron of an atom, located in the outermost shell (valence shell ) of the atom, that can be transferred to or shared with another atom.

Answer:

Explanation:

s = s₀ + v₀t + ½at²

s = 0 + 0(15) + ½(6)(15²)

s = 675 m

Not sure what the free fall acceleration is needed for, but if the object is dropped from a high enough point, it will travel in 15 seconds

s = ½10(15²) = 2250 m  if air resistance is ignored

11.4 m/s

Explanation:

The cord will break when the centripetal force exerted on it meets or exceeds the maximum tension [tex]T_{max}[/tex] that it can handle.

[tex]T_{max} = m\dfrac{v_{max}^2}{r}[/tex]

Solving for [tex]v_{max},[/tex] we get

[tex]v_{max}^2 = \dfrac{rT_{max}}{m}[/tex]

or

[tex]v_{max} = \sqrt{\dfrac{rT_{max}}{m}} =\sqrt{\dfrac{(1.3\:\text{m})(60\:\text{N})}{(0.6\:\text{kg})}}[/tex]

[tex]\:\:\:\:\:= 11.4\:\text{m/s}[/tex]

Answer:

it shows that the properties of the elements stay the same after the reaction

it shows that the properties of the elements stay the same after the reaction

it shows that all compounds remain bonded after the reaction

it shows that all compounds remain bonded after the reaction

it shows that only physical changes follow the Law of Conservation of Mass

it shows that only physical changes follow the Law of Conservation of Mass

it shows that no atoms have been gained or lost during the reaction

it shows that no atoms have been gained or lost during the reaction

Answer:

●Bx=Bcos40

Bx=10 × 0.76

Bx=7.6

●By=Bsin40

By=10×0.64

By=6.4

Hope it will help you.

The lead ball will float with about 17% of its volume above the surface of the mercury.

We know that density is defined as mass per unit volume of a substance. The density of a substance is an intrinsic property which can be used to identify a substance.

Given that Lead is less dense that mercury, we know that lead will float on mercury. Since the density of mercury is 13.6 g/cm3 and that of lead is 11.3 g/cm3, lead ball will float with about 17% of its volume above the surface of the mercury.

Learn more: https://brainly.com/question/12108425

Missing parts;

A spherical ball of lead (density 11.3 g/cm3) is placed in a tub of mercury (density 13.6 g/cm3). Which answer best describes the result?

A.The lead ball will float with about 83% of its volume above the surface of the mercury.

B.The lead ball will float with about 17% of its volume above the surface of the mercury.

C.The lead ball will float with its top exactly even with the surface of the mercury.

D.The lead will sink to the bottom of the mercury.

E.none of the above

Answer:D: the velocity is zero

Explanation:

Answer:

14. scolded

15. supporter

16. i am not sure but I think it is removes

17. comfortable

18. outdated

19. drink

20. it can be fantastic or wealthy

Answer:

14. Reicon's parents admonished him for breaking their antique collection,

15. I am an advocate of anti-corruption movement in the country.

16. The hotel abolishes its rice-all-you-can policy to avoid wastage of food.

17. The country has a very tropical climate where it only has dry and wet

seasons similar to other countries in Southeast Asia

18. The obsolete books and other references in the library resulted to the

removal in the shelves and inventory.

19. Beverages, such as juices, milk, beers and sodas, have increased in,due to low supply and importation issues.

20. The luxurious life of my cousin in an exclusive subdivision in Ta makes me inspired to dream and work hard for me to escape this unp.

Answer:

I don't know he he.

just joking

This question involves the concepts of work done and the frictional force.

a. Work done by the person is "692.82 N".

b. Work done by the frictional force is "490.5 N".

a.

Work done by the person can be given by the following formula:

[tex]W=FdCos\theta[/tex]

where,

W = work done by the person = ?

F = Force applied by the person = 80 N

d = distance traveled = 10 m

θ = angle between force and motion = 30°

Therefore,

[tex]W=(80\ N)(10\ m)Cos30^o[/tex]

W = 692.82 N

b.

Work done by the frictional force is given by the following formula:

[tex]W_f=fd\\W_f=\mu mgd[/tex]

where,

[tex]W_f[/tex] = work done by the frictional force = ?

μ = coefficient of friction = 0.5

g = acceleration due to gravity = 9.81 m/s²

Therefore,

[tex]W_f=(0.5)(10\ kg)(9.81\ m/s^2)(10\ m)[/tex]

[tex]W_f=490.5\ N[/tex]

Learn more about frictional force here:

https://brainly.com/question/1714663?referrer=searchResults

Answer:

South-North

Explanation:

Answer:

circuit

Explanation:

Answer:

[tex]k.e. = \frac{1}{2}mv {}^{2} \\ 800= \frac{1}{2} \times 40 \times v {}^{2} \\ 800 = 20v {}^{2} \\ v {}^{2} = 400 \\ v {}^{2} = 20ms {}^{ - 1} [/tex]

k.e. = kinetic energy

hope helpful <3

Answer:

she will eventually slow down and come to a stop

The average rate at which the neon atoms collide with one side of the container is [tex]3.31 \times 10^{26} \ atoms/s[/tex].

The given parameters;

The average kinetic energy of the gas molecules is calculated as follows;

[tex]K = \frac{3}{2} \frac{R}{N_a} T\\\\K = \frac{3 \times 8.314\times 298}{2\times 6.022 \times 10^{23}} \\\\K = 6.17\times 10^{-21} \ J/atoms[/tex]

The average speed of the gas molecules is calculated as follows;

[tex]K = \frac{1}{2}mv_{rms}^2\\\\v_{rms} = \sqrt{\frac{2K}{m} } \\\\v_{rms} = \sqrt{\frac{2\times 6.17 \times 10^{-21}}{3.35\times 10^{-26}} } \\\\v_{rms} = 607 \ m/s[/tex]

The time of collision of the gas molecules with the walls of the container is calculated as follows;

[tex]t = \frac{2d}{v} \\\\t = \frac{2\times 0.368}{607} \\\\t = 0.0012 \ s[/tex]

The average rate at which the gases collide with a single wall out of the 3 identical walls is calculated as follows;

[tex]rate =\frac{1}{3} \times \frac{n \times N_a}{t} \\\\rate = \frac{1.98 \times 6.02 \times 10^{23} \ atoms}{3 \times 0.0012 \ s} \\\\rate = 3.31 \times 10^{26} \ atoms/s[/tex]

Thus, the average rate at which the gases collide with one side of the container is [tex]3.31 \times 10^{26} \ atoms/s[/tex].

Learn more here:https://brainly.com/question/17566463

Answer:

Explanation:

0.120 rev/s(2π rad/rev) = 0.24π rad/s

At the highest point of the arc, gravity must supply the required centripetal acceleration. As the normal force is 1/4 of his normal weight, then 3/4 of gravity acceleration must be used as centripetal acceleration

0.75g = ω²R

R = 0.75(9.81) / (0.24π)²

R = 12.942198...

R = 12.9 m

The radius of the circle is equal to 12.95m which is rotating with an angular velocity of 0.120 rev/s.

A body spins in a vertical circle so that its motion at different points is different from the motion of the body is said to be vertical circular motion.

The velocity and tension vary in maximum magnitude from the lowest to the highest position because of the effect of the gravitational force of the earth.

Given, the angular velocity of the Ferris wheel, ω = 0.120 rev/s

ω = 0.120 rev/s × 2π rad/rev

ω= 0.7536 rad/s

If r is the radius of the circle and 'm' is the mass of the jack.

From newton's second law of motion, the net force will be equal to

mg - N = mrω²

mg - (mg/4) = mrω²

r = 3g/4ω²

r = 3×9.81 / (4× 0.7536)

r = 12.95 m

Therefore, the radius of the circle in which the jack travels is equal to 12.95m.

Learn more about vertical circular motion, here:

https://brainly.com/question/22810476

#SPJ2

Your question is incomplete, most probably the complete question was,

Jack sits in the chair of a Ferris wheel that is rotating at a constant 0.120 rev/s. As Jack passes through the highest point of his circular part, the upward force that the chair exerts on him is equal to one-fourth of his weight. What is the radius of the circle in which Jack travels?

Answer:

currents which circulate in conductors like swirling eddies in a stream in electromagnetic series....

Explanation:

the speed of sound is affected by temperature and humidity

Answer:

0.067 births per chipmunk per year

Explanation:

I took the test

The formula of force is F = ma.

Force: This can be defined as the product of mass and acceleration. The S.I unit of force is Newton (N).  Force is a vector quantity

Types of force

⇒ The formula of force is

⇒ Where:

Hence, the formula of force is F = ma.

Learn more about force here: https://brainly.com/question/13370981

Before looking at the formula, Lets understand what is force?

The formula used to find force is:

[tex] \sf \nrightarrow \: F=m×a[/tex]

Where,

Equation in words:- Force applied on an object is directly proportional or equal to the product of the mass of object and the acceleration of object.

Explanation:

The torque exerted on the wrench is

[tex]\tau = Fd\sin{\theta} = Fd[/tex]

since the force is applied perpendicular to the wrench, in which sin90 = 1. The torque then is

[tex]\tau = (185\:\text{N})(0.11\:\text{m}) = 20.35\:\text{N-m}[/tex]

Answer:

I think false I don't know if I right but I hoped this help

Answer:

Explanation:

If we assume the rod and sphere are of uniform construction so that their individual centers of mass are at their geometric centers, and that the rod end is attached to the surface of the sphere.

Balance moments about the rod free end of the assembly with its parts

(M + m)Cx = M(L/2) + m(L + R)

Cx = (M(L/2) + m(L + R)) / (M + m)

Answer:

The importance of signal processing science as has been made clear. Since we now know that it help to convert discrete signal from time domain to frequency domain. Moreover, we are now aware of the difference in DF5 and FFT algorithms as well as the implementation in Matlab.

The sun is not a burning fire.

It's much much much hotter than that.

The sun's energy is the result of continuous nuclear fusion in it's core. We know how to do that on Earth, but the only thing we've been able to use it for so far is hydrogen bombs and other thermonuclear weapons.

Explanation:

The initial kinetic energy [tex]KE_0[/tex] is

[tex]KE_0 = \frac{1}{2}mv_0^2 = \frac{1}{2}(400\:\text{kg})(10\:\text{m/s})^2[/tex]

[tex]\:\:\:\:\:\;\:= 2×10^4\:\text{J} = 20\:\text{kJ}[/tex]

The final kinetic energy [tex]KE[/tex] is

[tex]KE = \frac{1}{2}mv^2 = \frac{1}{2}(400\:\text{kg})(30\:\text{m/s})^2[/tex]

[tex]\:\:\:\:\:\:\:= 1.8×10^5\:\text{J} = 180\:\text{kJ}[/tex]

The work done W on the car is

[tex]W = \Delta{KE} = KE - KE_0[/tex]

[tex]\:\:\:\:\:\:\:= 180\:\text{kJ} - 20\:\text{kJ} = 1.6×10^5\:\text{J}[/tex]

The power expended P is

[tex]P = \dfrac{W}{t} = \dfrac{1.6×10^5\:\text{J}}{15\:\text{s}} = 10667\:\text{Watts}[/tex]

[tex]\:\:\:\:\:= 10.7\:\text{kW}[/tex]

Answer: 20

Explanation:

Answer:

The 10% must come off the energy, not the velocity

Explanation:

Change in height h = 1.89 + 2.20 = 4.09 m

Potential energy = mgh = m(9.81)(4.09) = 40.1m J

Friction losses 40.1m(0.10) = 4.01m J

Kinetic energy at end 40.1m - 4.01m = 36.1m J

KE = ½mv²

v = √(2KE/m)

v = √(2(36.1m)/m = √72.2

v = 8.4983...

v = 8.50 m/s