Explanation:
Ionic liquids offer numerous advantages over conventional organic solvents for carrying out organic reactions, Malhotra notes. "In many cases, product recovery is easier, catalysts can be recycled, and the ionic liquids can be reused," he says. "In addition, their thermodynamic and kinetic behavior is different.
Max Plank created the idea of quanta4 or quantum energy. This is?
Answer:
A theory of physics in which energy exists only in discrete quantities, called quanta. It was originated in 1900 by the German physicist Max Karl Ernst Ludwig Planck (1858–1947), who suggested that electromagnetic radiation is quantized, i.e. it can be emitted or absorbed only in tiny packets, not continuously.
Explanation:
When you use a simple machine to do work, ________.
A
distance increases and force decreases
B
distance and force both increase
C
distance and force both decrease
D
distance decreases and force increases
Answer:
distance decreases and force increases
Explanation:
Simple machine means less power Hence it will require more force.Hence distance will decrease with respect to force and force will decreaseWhen we use a simple machine to do work, the distance decreases, the force increases. Hence, option D is correct. Because, these parameters are in inverse proportion.
What is force?Force is an external agent acting on a body to change its motion. There are various kinds of force such as frictional force, magnetic force, gravitational force etc.
Work done is the effectiveness of the machine to use the force to make the maximum displacement. Work done is the product of force and distance.
W = F.ds
As per this relation, the force acting on large distance makes greater work done. However,
F = W/ds.
Hence, as the distance increases, the force is decreasing. Therefore, option D is correct.
Find more on work done:
https://brainly.com/question/13662169
#SPJ3
A mixture that you eat with at least 6 compounds in it
Answer:
Coloured candies?
Explanation:
Elements have different properties because they are made up of different types of
atoms.
Right a 5 sentence paragraph explaining this!!!
Answer:
,
Explanation:
Answer:
An atom is the smallest partical in the universe that makes up everything you see around you. Every chemical element is also made up of atoms. Since atoms are what give each element their defining characteristics, each element can be composed of multiple atoms but you must have all of the same type of atoms combined in order for it to be considered an element. For example the element gold can only contain gold atoms. If you mix the atoms of one element with the atoms of another your substance has then been changed from an element to a compound.
Explanation:
1. What are the 5 characteristics a substance must have in order to be a mineral
Answer:
A mineral has to be naturally occurring, inorganic, solid, have a crystal structure, and have a definite chemical composition.
Explanation:
in which direction on the periodic table does metallic character increase?
Answer:
Metallic character increases down each Group of the Table as the outer electrons are further from the nucleus and require less energy for their removal. (a) metallic character decreases from left to right in each Period.
Explanation:
The metallic character increases down each Group on the periodic table.
The metallic character decreases from left to right in each Period.
What is periodic table ?The chemical elements represents in tabular form.The elements in periodic table arranged on the basis of increasing atomic masses.The interactive periodic table showing name, atomic number, atomic mass, boiling point, melting points , state of matter etc.What is metal and its metallic character?The elements having strong tendency to loss their electrons is called metals.The metals have characteristics of ductile, malleability, The metallic character refers to reactivity of metals.learn about metallic character,
https://brainly.com/question/16940676
#SPJ2
Sodium reacts with chlorine to form the compound sodium chloride, or salt. The chemical formula below shows how the two elements combine into a compound.
2Na + Cl2 → 2NaCl
If the total mass of the reactants is 58.44 amu, what will be the total mass of the products?
116.88 amu
60 amu
58.44 amu
29.22 amu
Answer:
Its C
Explanation:
The law of conservation of mass says no atoms can be created or destroyed just rearranged so the mass at the beginning before the reaction would stay the same after it
Considering the Law of Conservation of Matter, the correct answer is the third option: the total mass of the products will be the same and has a value of 58.44 amu.
The Law of Conservation of Matter is also called the law of conservation of mass or the Law of Lomonósov-Lavoisier. This law postulates that "the mass is not created or destroyed, only transformed."
This means that the reagents interact with each other and form new products with physical and chemical properties different from those of the reagents because the atoms of the substances are ordered differently. But the amount of matter or mass before and after a transformation (chemical reaction) is always the same, that is, the quantities of the masses involved in a given reaction must be constant at all times, not changing in their proportions when the reaction ends.
In other words, then the mass before the chemical reaction is equal to the mass after the reaction.
So, in this case, if the total mass of the reactants is 58.44 amu, the total mass of the products will be the same and has a value of 58.44 amu.
Finally, the correct answer is the third option: the total mass of the products will be the same and has a value of 58.44 amu.
Learn more:
https://brainly.com/question/13383562?referrer=searchResultshttps://brainly.com/question/14236219The volume of a bottle is 500cm. what is the volume of the bottle in millimeters
Answer:
5000mm
Explanation:
10mm makes 1 cm
so if we compare them:
10mm-->1cm
x -->500cm
now cross multiply:
1x-->5000
divide both sides by 1 for x to be alone
therefore we get x=5000
why does the reaction of anthracene with maleic anhydride needs to be kept away from water?
Answer:
Water separates the two reactants into two layers, stopping the reaction.
Explanation:
Maleic anhydride can and will react with water.
The reaction between maleic anhydride and anthracene is a Diels Alder reaction. This type of reaction is a cycloaddition reaction.
What is Diels Alder reaction?The Diels Alder reaction is a member of a class of reactions called cycloadditions. This reaction involves three pi bonds, two from the diene and one from the dienophile in a concerted reaction to give a six-membered ring.
Since this reaction involves four pi electrons in the diene and two pi electrons from the dienophile, it is sometimes referred to as a 4+2 cycloaddition.
The presence of electron donating groups on the diene and the electron withdrawing groups on the dienophile favors normal Diels Alder reactions. The reaction involves the formation of new σ bonds which are energetically more stable than π bonds.
Anthracene can react with water, breaking the center ring. Maleic anhydride can react with water, opening its ring. The reactants get seperated into two layers by water and thereby stops the reaction.
To know more about Diels Alder reaction, visit;
https://brainly.com/question/29972519
#SPJ6
Helpp meeee the picture is above.
Answer:
a) 2.7 g cm³
b) 10.2 g
Explanation:
a) Density = Mass/Volume
= 21.6/8.00
= 2.7 g cm³
b) Mass = Volume × Density
= 2.55 × 4.0
= 10.2 g
PLS HELP ASAP!
How many years?
The radioactive isotope carbon-14 is used for radiocarbon dating. The half-life of carbon-14 is 5.73×103 years.
A wooden artifact in a museum has a 14C to 12C ratio that is 0.745 times that found in living organisms. Estimate the age of the artifact.
use graph
Answer:
about 5 years i think
Explanation:
I've tried all the methods i know
it's about 5 years
hope it helps
The age of the artifact is equal to 2.5 × 10³ years when the half-life of carbon- 14 is 5.73 × 10³ years.
What is the half-life period?The half-life of a radioactive element is defined as the time that is required to decrease the original quantity of a radioactive isotope to half after decay.
The half-life of a radioactive isotope is the feature of the element and does not depend upon the actual amount of the radioactive isotope.
Given, the ratio of the initial and left amount of ¹⁴C is :
N = 0.745 N₀
The half-life period of the ¹⁴C isotope = 5.73 × 10³ years
The rate constant of the decay of radioisotope can be calculated from the below-mentioned formula:
[tex]\displaystyle k=\frac{0.693}{t_{1/2}}[/tex]
[tex]\displaystyle k=\frac{0.693}{5.73 \times 10^3}[/tex]
k = 0.123 × 10⁻³ yr⁻¹
The age of the artifact can be calculated as:
[tex]\displaystyle t =\frac{2.303}{k} log\frac{N_0}{N}[/tex]
[tex]\displaystyle t =\frac{2.303}{0.123\times 10^{-3}} log\frac{N_0}{0.735 N_0}[/tex]
t = 2.5 × 10³ years
Learn more about the half-life period, here:
brainly.com/question/14521252
#SPJ2
um I don't know just thanks :(
Answer:
i think it would be answer D
Explanation:
at the end of the isomerization reaction, what chemical is used to quench the residual bromine?
Answer:
They are constitutional isomers and diastereomers.
what is the difference between essential and nonessential amino acids
Answer:
Simply put, essential amino acids are amino acids that cannot be made by the body. These amino acids must come from a person's diet, as the human body lacks the metabolic pathways required to synthesize these amino acids. ... Nonessential amino acids do not need to come from the diet.
Explanation:
hope it helps you
Is this statement true or false?
The products of a chemical reaction have the same properties as the reactants.
true
false
Answer:
The answer is B. False
Explanation:
I will brainless who can answer this all pleaseeeeej
how do the melting points of enantiomers compare to each other? how do the melting points of diastereomers compare to each other?
Melting points of enantiomers will not compare to each other as they have same M.P. and Diastereoisomers are compared on the basis of melting point.
What are steroisomers?Stereoisomers are those isomers which are having the same molecular formula but different spatial arrangemet of atoms within the molecule.
Enantiomers: Enantiomers are pair of two stereoisomers which are having mirror image of each other, but are not superiposable. They have the same melting point so we can not compare enantiomers on the basis of their melting point.Diastereoisomers: Diastereoisomers are pair of those stereoisomers which are not having mirror image of each other, but are superimposable.They have different physical and chemical properties, so it can be compared on the basis of melting point.Hence, only diastereoisomers are compared on the basis of melting point.
To know more about stereoisomers, visit the below link:
https://brainly.com/question/7063755
Do you have more human cells or
bacteria cells in your body?
I'LL MARK BRAINLIST
Lab: Kinetic Energy
I NEED TWO PARAGRAPHS ABOUT THE LAB AND ABOUT KINETIC ENERGY
Answer:
In physics, the kinetic energy of an object is the energy that it possesses due to its motion. It is defined as the work needed to accelerate a body of a given mass from rest to its stated velocity. Having gained this energy during its acceleration, the body maintains this kinetic energy unless its speed changes. The same amount of work is done by the body when decelerating from its current speed to a state of rest.
In classical mechanics, the kinetic energy of a non-rotating object of mass m traveling at a speed v is 1/2*mv^2. In relativistic mechanics, this is a good approximation only when v is much less than the speed of light.
The standard unit of kinetic energy is the joule, while the English unit of kinetic energy is the foot-pound.
Explanation:
Don't directly copy and paste this because you will get flagged for plagiarism. Just type this out in your own words and change a few of the words to their synonyms.
the only report that will fool the teachers
An effective treatment for some cancerous tumors involves irradiation with fast neutrons.
The neutrons from one treatment source have an average velocity of 5.7 x 10 m/s. If the velocities of individual neutrons are known to within 2% of this value, what is the
uncertainty in the position of one of them?
__m
Here is your answer look at your image below
What is the last step in the scientific method?
Answer:
D. Communication of results
Answer:
b.
conclusion
because it gives the overall information about the experiment
Someone help me with this pls
Answer:
D
Explanation:
Lamps
7th grade Sem 1
13.2.6 Quiz: Chemistry of Life
Question 3 of 5
Which substance used during photosynthesis does a plant take in from the
soll?
A. Water
O
B. Sugars
C. Proteins
D. Oxygen
SUBMIT
Answer: Water
Explanation: During photosynthesis, plants take in carbon dioxide (CO2) and water (H2O) from the air and soil
what is the acceleration due to gravity of the moon
what is the purpose of the dts other auths and pre audits screen?
Answer:
It allows the traveler to justify questionable expense items.
hope that helped <3
Salt from evaporated seawater has been formed from
O a. artifical means
O b. solution
O c. volcanoes
O d. magma
Answer:
a
Explanation:
its formed from sodium and sodium metal is produced by electrolysis of dry molten sodium chloride.
what is the weight of the ethil alcohol that exactly falls a 200 .0 mL container ? the density of ethyl alcohol is 0.789 g/mL
Answer:
158 grams
Explanation:
A compound is a hydrate when it
where are metal atoms located on the periodic table
Answer:
to the right of the steps
Explanation:
the metals stop at the stair step
Magnesium is in Group 3. Strontium is in group 5. Which element do you predict will be less reactive in water?
Answer:
Strontium
Explanation:
strontium will be less reactive because reactivity decreases down the group