Please help !

A mercury thermometer is constructed as shown. The capillary tube has a diameter of 0.005 cm, and the bulb has a diameter of 0.31 cm. Neglecting the expansion of the glass, find the change in height of the mercury column for a temperature change of 31◦C. The volume expansion coefficient for mercury is 0.000182 (◦C)−1 .

Answer in units of cm.

The force that is exerted by a magnet as it picks up iron nails could best be described as the magnetic force exerted by electrons moving within the magnet on electrons moving within the nails. Option A right choice.

The force of attraction between the magnet and the iron nail is as a result of the magnetic field that surrounds the magnet, the iron nail is then drawn toward the magnet. This force is known as the magnetic force and it can either attract or repel objects that are magnetic.

Magnets have two poles, the North Pole and the South Pole, the magnetic field always flows from the North Pole to the South Pole, and therefore when an iron nail is placed within the magnetic field, the magnetic force pulls it towards the magnet.

The reason the force that the magnet exerts is best described as magnetic is that it is a result of the magnetic field that surrounds the magnet. Magnetic forces do not involve electrons or ions, rather, they involve the movement of the magnetic field around the magnet, which exerts a force on any magnetic object that is placed within the field.

Therefore, the force that is exerted by a magnet as it picks up iron nails could best be described as the magnetic force exerted by electrons moving within the magnet on electrons moving within the nails.

So, Option A is right choice.

For similar question on magnetic force

https://brainly.com/question/13277365

#SPJ11

Question:-

the force that is exerted by a magnet as it picks up iron nails could be best described as

A. the magnetic force exerted by ions moving within the magnet on electrons moving within the nails.

B. the electric force exerted by electrons in the magnet, on electrons in the nails.

C. the magnetic force exerted by electrons moving within the magnet, on electrons moving within the nails.

D. the force of attraction between the nuclei of atoms in the magnet and the nuclei of atoms in the nails.

E. the electric force exerted by ions in the magnet on electrons in the nails.

Answer:

The time interval between 1:02:32 pm and 1:03:10 pm is 38 seconds. During this time interval, the ant travels at a speed of 1 cm/s, so it will travel a distance of:

distance = speed x time

distance = 1 cm/s x 38 s

distance = 38 cm

Starting at the 5.0 cm position on the meter stick, the ant will travel 38 cm in 38 seconds, ending up at:

5.0 cm + 38 cm = 43.0 cm

Therefore, the ant will be at the 43.0 cm position on the meter stick at 1:03:10 pm.

Answer:

43.0 cm

Explanation:

The ant is traveling at a speed of 1 cm/s. At 1:02:32 pm, the ant is at the 5.0 cm position on the meter stick. The time difference between 1:02:32 pm and 1:03:10 pm is 38 seconds. Since the ant is traveling at a speed of 1 cm/s, in 38 seconds it will have traveled a distance of 38 cm. Therefore, at 1:03:10 pm, the ant will be at the position of 5.0 + 38 = 43.0 cm on the meter stick.

The center of mass for this star-planet system would be located approximately 0.021 AU from the center of the star.

To find the center of mass of the star-planet system, we will use the following formula:

Center of mass = (m1 * r1 + m2 * r2) / (m1 + m2)

Here, m1 and r1 are the mass and distance of the star from the reference point (center of mass), and m2 and r2 are the mass and distance of the planet.

The mass of the star (our Sun) is 1 solar mass, and the mass of the planet is 6 times the mass of Jupiter, which is about 0.018 solar masses. The distance from the star to the planet is the same as the distance from Jupiter to our Sun, which is 5.2 AU.

Using the formula:

Center of mass = (1 * r1 + 0.018 * 5.2) / (1 + 0.018)

Solving for r1, we get:

r1 ≈ 0.021 AU

So, the center of mass is approximately 0.021 AU from the center of the star.

To know more about center of mass click on below link:

https://brainly.com/question/29576405#

#SPJ11

The resistivity of both the wires is same. The resistance of the second wire to the first is 1:2.

The resistivity of a material is a property that depends only on the material itself, and it is not affected by the dimensions or shape of the object made from that material. In this case, since both wires are made of copper, their resistivity will be the same.

However, you may be looking for the ratio of the resistance of the two wires, which does depend on their dimensions. The resistance of a wire can be calculated using the formula:

R = ρ * [tex]\frac{L}{A}[/tex]
where R is the resistance, ρ is the resistivity, L is the length, and A is the cross-sectional area of the wire.

For the first wire, we have:

R1 = ρ * [tex]\frac{L}{A}[/tex]

For the second wire, we have:

R2 = ρ * [tex]\frac{2L}{4A}[/tex]

Now, let's find the ratio of the resistances R2 to R1:

[tex]\frac{R2}{R1}[/tex] = (ρ * [tex]\frac{2L}{4A}[/tex]) / (ρ * [tex]\frac{L}{A}[/tex])

The resistivity, ρ, cancels out since it is the same for both wires:

[tex]\frac{R2}{R1}[/tex] = [tex]\frac{2L}{4A}[/tex] ÷ [tex]\frac{L}{A}[/tex]

Now we can simplify the expression:

[tex]\frac{R2}{R1}[/tex] = [tex]\frac{2L}{4A}[/tex] * [tex]\frac{A}{L}[/tex]

The L and A cancel out:

[tex]\frac{R2}{R1}[/tex] = [tex]\frac{2}{4}[/tex]

[tex]\frac{R2}{R1}[/tex] = [tex]\frac{1}{2}[/tex]

So the ratio of the resistance of the second wire to the resistance of the first wire is 1:2. Note that this is the ratio of the resistances, not the resistivities, which are the same for both wires.

Know more about resistivity here:

https://brainly.com/question/30799966

#SPJ11

The atoms will move parallel to the direction of the incoming wave due to the sound wave.

The atoms will move perpendicular to the direction of the incoming wave due to the light wave.

A sound wave is a mechanical wave that requires a medium to travel through, while a light wave is an electromagnetic wave that can travel through a vacuum.

Because sound waves are longitudinal waves, the medium's particles vibrate perpendicular to the wave's direction.Light waves are transverse waves, which means that the particles of the medium vibrate perpendicular to the direction of the wave.

When waves come into contact with atoms, they can cause the atoms to vibrate or move. The direction of this movement depends on the direction of the wave and the properties of the medium.

In general, sound waves can cause atoms to move parallel to the direction of the wave, while light waves can cause atoms to move perpendicular to the direction of the wave.

To know more about sound wave,visit:

https://brainly.com/question/21995826

#SPJ1

"a) The total energy of the cart spring system is calculated to be 11.25 J.

b) The maximum speed of the cart is calculated to be 4 m/s.

c) If the energy is tripled, the new amplitude is 0.0519 m.

d) The maximum speed of the cart in this case is calculated to be 6.94 m/s.

e) The assumptions that we have made in order to solve the problem are that the total energy of the system transformed entirely to a potential energy x = A and transformed to a kinetic energy when the cart passes the equilibrium position."

Amplitude A of vibration is given as 0.03 m.

We know, total energy is nothing but sum of potential and kinetic energies.

In this case, kinetic energy is zero.

So, E = 1/2 kx² = 1/2 kA² = 1/2 (2.5 × 10⁴)0.03² = 11.25 J

b) As the spring passes its equilibrium, total energy is transformed into kinetic energy.

E = K + 0 = 1/2 m vmax²

v = √(2E/m) = √(2×11.25)/1.4 = 4 m/s

c) When the cart hits a new level of vibration and the system's total energy is tripled, all of the system's energy is converted into potential energy.

E = 3 × 11.25 = 33.75 J

As the whole energy is converted into potential energy,

E = U + 0 = 1/2 k A²

A = √2E/k = √(2×33.75)/(2.5 × 10⁴) = 0.0519 m

d) If the total energy is tripled and the cart passes the equilibrium position, the entire system's energy is in the form of kinetic energy.

E = K + 0 = 1/2 m v²

v = √(2E/m) = √(2×33.75)/1.4 = 6.94 m/s

e) In order to solve the issue, we have made the assumptions that the system's total energy completely transforms to a potential energy, x = A, and kinetic energy is produced when the cart moves past the equilibrium point.

The value of v max will be less than the value we evaluated if the assumptions we made were not reasonable because if the assumptions were incorrect, the spring would still have some potential energy when the cart passed the equilibrium position, and the system's total energy would not have fully converted to kinetic energy.

To know more about springs:

https://brainly.com/question/29447623

#SPJ4

Answer:

Explanation:

So this question is basically asking you to find where 20= -16t^2+100t+5 because you want to find the time for how long after the arrow was launched does it hit the intended target of 20 feet. Using a graphing calculator you put -16t^2+100t+5 into y1 and 20 into y2. Once you do that you can find the intersection point and the x coordinate is your answer because the x value represents the time. So the answer is 6.096 seconds. If you need an exact answer then you need to use the quadratic formula and you would get (25+the square root of 565)/ 8

After the arrow passes its maximum height, it comes down and hits a target that was placed feet above the ground. Long after the arrow was shot, it hit its intended target it will take about 5.2 seconds for it to hit its intended target.

We can use the equation given below to calculate the height of an arrow in feet t seconds after it has been fired. This equation is a quadratic equation.

h(t) = -16t² + 48t + 100The maximum height that the arrow reaches can be determined by using the vertex formula.

The vertex formula for a quadratic equation is given below. t = -b / 2a.

After calculating the value of t, we can find the height of the arrow at this time. After this, we can set up another equation to find out how long it takes for the arrow to hit its intended target. This equation will be given as follows.100 - h(t) = -16t² + 48t + 9.4. By solving this equation, we can get the value of t. It is approximately 5.2 seconds. Therefore, the arrow will hit its intended target about 5.2 seconds after it has been fired.

Learn more about quadratic equation at:

https://brainly.com/question/30098550

#SPJ11

a) The center of mass is 28 cm from the 800 g ball. b) The rotational kinetic energy is 0.63 J if the structure rotates about its center of mass at 100 rpm.

To find the center of mass of the system, we need to consider the mass and position of each component. Since the rod is 40 cm long and has a mass of 200 g, we can treat it as a point mass located at its midpoint, which is 20 cm from each ball. The center of mass is then the weighted average of the positions of the three point masses. Using the formula for the center of mass, we find that the center of mass is 28 cm from the 800 g ball.To find the rotational kinetic energy, we need to know the moment of inertia of the system and the angular velocity. Since the system is rotating about its center of mass, we can use the parallel axis theorem to find the moment of inertia. The moment of inertia of the two balls is 0.14 kgm^2, and the moment of inertia of the rod is 0.004 kgm^2. The total moment of inertia is then 0.144 kg*m^2. Converting 100 rpm to radians per second, we get an angular velocity of 10.47 rad/s. Using the formula for rotational kinetic energy, we find that the rotational kinetic energy is 0.63 J.

Learn more about rotational kinetic energy here:

https://brainly.com/question/30107920

#SPJ11

In a piston, the pressure is arranged from maximum pressure to minimum pressure in the following way:

Maximum pressure is at the top of the piston or the end that is opposite to the connecting rod, while minimum pressure is at the bottom of the end that is attached to the connecting rod. When the fuel-air mixture is ignited in the combustion chamber, it produces high-pressure gases that push the piston towards the connecting rod. This pressure decreases as the piston moves downwards, until it reaches the bottom of its stroke, where the pressure is at its lowest. The process then repeats itself as the piston moves back up towards the top of the cylinder. This movement is known as the piston's stroke. The pressure in the cylinder is controlled by various factors, including the size and shape of the combustion chamber, the fuel-air mixture ratio, and the timing of the ignition.

Learn more about piston here:

https://brainly.com/question/28044328

#SPJ4

Lighting is very important in determining the design of a room. When constructing a place, it is critical to consider natural light sources and how to supplement them with artificial lighting.

These are some examples of how lighting may influence space design: When evaluating the size of windows in a space, keep in mind that the size and position of windows in a room can affect the amount and quality of natural light that enters the area. Measuring windows and selecting proper window coverings may help to improve natural light while also contributing to the overall style of the room. When arranging lights strategically to produce appropriate lighting: Lamps carefully placed throughout a space may generate distinct moods and highlight key regions or things. For instance.

learn more about Lighting   here:

https://brainly.com/question/15032869

#SPJ4

The block reaches point B if it has enough kinetic energy to overcome the potential energy at that point. If not, it will stop short of point B.

To find how far up the curved track the block reaches, follow these steps:

1. Calculate the block's initial kinetic energy (KE) using the formula KE = 0.5 * m * v², where m is the mass of the block and v is its initial velocity.

2. Determine the potential energy (PE) at point B using the formula PE = m * g * h, where g is the acceleration due to gravity and h is the height of point B.

3. Compare the initial kinetic energy and the potential energy at point B.

4. If KE >= PE, the block reaches point B. If KE < PE, the block stops short of point B.

5. To find the stopping point, equate the initial kinetic energy to the potential energy at the stopping point: KE = m * g * h_stop.

6. Solve for h_stop to find how far short of point B the block stops.

To know more about kinetic energy click on below link:

https://brainly.com/question/26472013#

#SPJ11

Only about 1% of the total area of the galactic disk is visible to astronomers at visual wavelengths due to interstellar dust.

The diameter of the Milky Way galaxy is estimated to be about 100 kpc (kilo-parsecs), and its thickness is about 1 kpc. Astronomers can see at most about 5 kpc into the disk of the Milky Way galaxy at visual wavelengths due to the absorption of light by interstellar dust. To find the percentage of the galactic disk's area that is visible, we can use the formula for the area of a disk, which is πr^2, where r is the radius.

The radius of the visible portion of the galactic disk is 5 kpc, so the area of this visible portion is:

A_visible = π(5 kpc)^2

= 78.5 kpc^2

The total area of the galactic disk is:

A_total = π(50 kpc)^2

= 7,853.98 kpc^2

Therefore, the percentage of the galactic disk's area that is visible is:

[tex](78.5 ^{2} \times7,853.98 ^{2} )\times 100%[/tex] ≈ 1.0%

To learn more about galactic disk

https://brainly.com/question/17162442

#SPJ4

The specific gravity of the other fluid is 2.0.

We know that the specific gravity of the fluid at the bottom of the u-tube is 4.0, which means its density is 4 times the density of water. Since the density of water is 62.4 lb/ft^3, the density of the fluid is:

ρ_1 = 4 * 62.4 lb/ft^3 = 249.6 lb/ft^3

We also know that the height of the fluid in the outer leg is 6 inches, or 0.5 feet. Substituting these values into the equation, we get:

P_atm + 249.6 lb/ft^3 * g * 0.5 ft = P_atm + ρ_2 * g * 0.5 ft

Simplifying and canceling out P_atm and g, we get:

124.8 lb/ft^3 = ρ_2

Therefore, the specific gravity of the other fluid is,

SG = ρ_2 / ρ_water = 124.8 lb/ft^3 / 62.4 lb/ft^3 = 2.0

To know more about tube, here

brainly.com/question/6476032

#SPJ4

The voltage across the capacitor 11 ms after closing the switch is  11 ms.

To solve this problem, we will use the time constant (τ) of the RC circuit, which is given by the product of the resistance (R) and the capacitance (C):

τ = RC

Since the capacitor is initially uncharged, the voltage across it (Vc) at time t is given by:

Vc = V0(1 - e^(-t/τ))

Where V0 is the voltage of the battery.

At time t = 11 ms, the switch is closed, and the capacitor begins to charge. We are asked to find the voltage across the capacitor at this time.

Since the switch is closed, the resistor is in the circuit, and we need to know its value to calculate the time constant.

However, we are not given the value of the resistor, so we cannot solve the problem with the information given.

We need either the value of the resistor or the time constant to calculate the voltage across the capacitor at 11 ms.

For such more question on voltage:

https://brainly.com/question/1176850

#SPJ11

The current passing through a 1.5-m length of straight wire that experiences a maximum force of 1.4 N in a uniform magnetic field of 1.8 T is 0.52 A.

Use the formula for magnetic force on a current-carrying wire:

F = BIL

where F is the magnetic force (1.4 N), B is the magnetic field strength (1.8 T), I is current, and L is the length of the wire (1.5 m).


I = F / (B * L)

I = 1.4 N / (1.8 T * 1.5 m)

I = 1.4 / 2.7 = 0.5185185 A

I ≈ 0.52 A

Therefore, a current of 0.52 A must be passing through the wire.

To know more about magnetic force click here:

https://brainly.com/question/3160109

#SPJ11

Consider that a cup of hot coffee sits in a cool, well-insulated room. Heat transfer between the coffee and air in the room causes the coffee to gain 1 kJ of energy while the air loses 1 kJ. The law of thermodynamics that was violated is the Second Law.

The laws of thermodynamics are fundamental principles that govern the behavior of energy in nature. There are four fundamental laws of thermodynamics.

The First Law of Thermodynamics is the Law of Conservation of Energy. It states that energy cannot be created or destroyed, but it can be transformed from one form to another. For example, when an electric current is passed through a resistor, the electrical energy is converted into heat energy.

The Second Law of Thermodynamics is the Law of Entropy. It states that in any process, the total entropy of a closed system will always increase over time. For example, if you drop an egg, the egg will break and the entropy of the egg will increase.

The Third Law of Thermodynamics states that it is impossible to reduce the temperature of a system to absolute zero in a finite number of steps.

The Fourth Law of Thermodynamics states that the entropy of a system approaches a constant value as the temperature approaches absolute zero.

For more such questions on law of thermodynamics, click on:

https://brainly.com/question/26035962

#SPJ11

The statement "Emerging adults are typically financially independent from their parents" is False.

Emerging adults refer to individuals between the ages of 18 and 29 who are transitioning from adolescence to adulthood. This stage of development is characterized by exploring one's identity, experiencing new levels of independence, and facing a variety of challenges. Emerging adults are typically still in the process of completing their education, pursuing their career goals, and establishing their own families.

During this phase of life, emerging adults may face a range of challenges such as financial instability, mental health concerns, social isolation, and difficulties in forming meaningful relationships. However, emerging adulthood is also marked by opportunities for personal growth, adventure, and exploration.

Emerging adults often have a unique perspective on the world, with attitudes and beliefs that differ from previous generations. They are also highly connected through social media and other digital technologies, and have access to an unprecedented amount of information and resources.

Learn more about Emerging adults here:

https://brainly.com/question/2274927

#SPJ1

It takes approximately 20.09 seconds for the car to accelerate up the 2.85 meter hill.

potential energy =[tex]m * g * h[/tex]

where m = 825 kg (mass of the car), g = 9.81 m/s^2 (acceleration due to gravity), and h = 2.85 m (height of the hill)

potential energy = 825 kg * 9.81 m/s^2 * 2.85 m

potential energy = 22,571 J

work = kinetic energy + potential energy

where kinetic energy = 1/2 * m * v^2

and v = 13 m/s (velocity of the car)

kinetic energy = 1/2 * 825 kg * (13 m/s)^2

kinetic energy = 703,612 J

work = 703,612 J + 22,571 J

work = 726,183 J

power = work / time

where power = 36,181 watts (output power of the car's engine)

time = work / power

time = 726,183 J / 36,181 W

time = 20.09 seconds

Acceleration can be caused by various forces, such as gravity, friction, or a pushing or pulling force. For example, when a car accelerates, the engine produces a force that propels the car forward, increasing its speed. When a skydiver jumps out of a plane, gravity causes the diver to accelerate towards the ground.

In addition to its use in physics, the term "accelerate" is also used in a broader sense to describe the process of speeding up or increasing the pace of something. For example, a company may accelerate its production schedule to meet a deadline, or an athlete may accelerate their training to improve their performance. In these contexts, acceleration refers to an increase in the rate or intensity of a process, rather than a change in velocity.

To learn more about Acceleration visit here:

brainly.com/question/12550364

#SPJ4

A protostar with a mass too small to sustain nuclear fusion is known as a brown dwarf.

Brown dwarfs, sometimes referred to as failed stars, are substellar objects that lack the mass to sustain hydrogen fusion in their cores, the process which powers stars. Instead, they are sustained by the gravitational contraction of deuterium and lithium fusion.

These objects are much cooler than stars, emitting most of their light in the infrared range and having temperatures of only up to a few thousand kelvins. Brown dwarfs have masses ranging from 13 to 75 times that of Jupiter, and are much less luminous than stars. Brown dwarfs are not massive enough to sustain nuclear fusion, and thus are not classified as stars.

know more about Protostar here

https://brainly.com/question/28852972#

#SPJ11

If you could count stars at a rate of about one per second, it would take several thousand years to count all the stars in the Milky Way galaxy.

The Milky Way galaxy contains approximately 100 billion to 400 billion stars. In order to estimate the time it would take to count all the stars, let's assume the average number of stars, which is around 250 billion.


1. First, determine the number of seconds in a minute: 60 seconds
2. Next, determine the number of seconds in an hour: 60 minutes * 60 seconds = 3,600 seconds
3. Determine the number of seconds in a day: 24 hours * 3,600 seconds = 86,400 seconds
4. Determine the number of seconds in a year: 365 days * 86,400 seconds = 31,536,000 seconds

Now, divide the total number of stars (250 billion) by the number of seconds in a year:
250,000,000,000 stars / 31,536,000 seconds per year ≈ 7,926 years

So, it would take approximately 7,926 years to count all the stars in the Milky Way galaxy at a rate of one star per second. Therefore, the correct answer from the group of choices is several thousand years.

Know more about Milky Way galaxy here:

https://brainly.com/question/2905713

#SPJ11

R = 6550000 m

r = 633000 m

T = 108 min = 6480 s

v = d/T

Distance = circumference = 2πr

v = 2π(R+r)/T

v = 2π(6550000m+633000m)/6480s

v = 6964.83334282 m/s

The speed of the spaceship is approximately 7637.6 m/s.

To find the speed of the spaceship, we need to use the equation for circular motion:

v = (2πr) / T

where v is the speed of the spaceship, r is the total distance from the center of the planet to the spaceship, and T is the period of the orbit.

Since the spaceship is 633 km above the surface of the planet and the radius of the planet is 6550 km, the total distance from the center of the planet to the spaceship is:

r = 633 km + 6550 km = 7183 km

Converting km to m, we get:

r = 7183000 m

The period of the orbit is 108 minutes, which is equivalent to:

T = 108 minutes × 60 seconds/minute = 6480 seconds

Now we can plug in these values to find the speed of the spaceship:

v = (2π × 7183000 m) / 6480 seconds = 7637.6 m/s

Therefore, the speed is 7637.6 m/s.

To know more about speed, refer here:

https://brainly.com/question/13263542#

#SPJ11

Answer:

B. economics

Explanation:

An understanding of economic principles can help a 911 operator understand the root causes of many different emergencies, such as poverty, drug abuse, and domestic violence, and help them be more effective at dispatching resources to help those in need. Furthermore, a basic understanding of economics can provide context for some types of emergencies, such as natural disasters or workplace accidents related to unsafe working conditions. However, while having an understanding of economics is helpful, it's not mandatory for 911 operators to perform their jobs effectively. They ultimately need to be skilled in communication, risk assessment, and decision-making to ensure that people receive the assistance and resources they need in an emergency situation.

Foundation: Use a deep and sturdy foundation that extends below the frost line and is anchored to bedrock. Consider foundations or caissons, which can better withstand lateral forces during an earthquake.

Structural System: Utilize a seismic-resistant structural system such as reinforced concrete or steel framing with appropriate bracing and cross-bracing configurations. Consider incorporating a moment-resisting frame or a shear wall system, which can provide enhanced lateral stability during seismic events.

Dampers and Isolators: Include seismic dampers or isolators in the structural system to absorb or dissipate seismic energy. These can be installed at various locations, such as between floors or in the foundation, to reduce the impact of seismic forces on the building.

Diaphragms: Strengthen diaphragms, which are horizontal structural elements such as floors and roofs, to improve their resistance to lateral loads during an earthquake. Consider using diaphragms made of materials such as cross-laminated timber (CLT) or steel decking, which can provide additional stiffness and strength.

Learn more about earthquake here

https://brainly.com/question/29500066

#SPJ4

A coordinate system is a system of coordinates used to locate positions on a plane or in Space. It is used to specify the position of a point in space.

The most common coordinate system is the Cartesian coordinate system, which uses two axes, the x-axis and y-axis, to represent the position of a point in space. The x-axis is the horizontal axis, and the y-axis is the vertical axis. The origin, or (0,0), is the point where the two axes intersect.Motion sensors are devices that detect the movement of objects.

They are used in a variety of applications, such as robotics, gaming, and security. Motion sensors can be used to detect the movement of objects in a specific direction or to detect the presence of objects in a certain area.

They can also be used to detect changes in temperature or light levels.Both motion sensors will use the same coordinate system by default. If they do not, it can be handled by adjusting the settings on the sensors. The coordinate system should be clearly marked on the graph paper or other surface used to plot the motion of the objects being measured.

To Learn More About Space

https://brainly.com/question/19052774

#SPJ11

CMBR is considered evidence for the Big Bang because its temperature and structure are consistent with the theory's predictions.

The cosmic microwave background radiation (CMBR) is viewed as one of the most grounded bits of proof on the side of the Theory of how things came to be. As per this hypothesis, the universe started as a peculiarity and afterward quickly extended, in the long run chilling off and framing matter as far as we might be concerned today. As the universe extended and cooled, it abandoned a radiation field that is noticeable today as the CMBR. The perception of CMBR gives significant bits of knowledge into the early universe, permitting us to concentrate on its temperature and construction. The CMBR is seen to have an almost uniform temperature this way and that, reliable with the Theory of how things came to be's expectation of a homogeneous and isotropic universe. Also, the CMBR shows variances in temperature, which are remembered to have emerged from quantum vacillations in the early universe. Together, these perceptions give solid proof to the Theory of how things came to be's legitimacy.

To learn more about big bang theory, refer:

https://brainly.com/question/30832607

#SPJ4

Consider the given circuit shown below. What is the energy (in J) stored in each capacitor after the switch has been closed for a very long time. The given circuit is shown below.

The energy stored in each capacitor is given as follows:C1 = (1/2) * (Q1/C1)^2C2 = (1/2) * (Q2/C2)^2Initially, the capacitors are uncharged when the switch S is open. When the switch S is closed for a very long time, it is equivalent to that capacitors have been connected in parallel. So the equivalent capacitance of the parallel combination is given as:C = C1 + C2 = 4 μF + 4 μF = 8 μFThe potential difference across each capacitor is 12 V as the battery is ideal. Therefore, the charge stored in each capacitor is given by:Q = CVCharge stored in the equivalent capacitor,Q = CeqV = 8 μF × 12 V = 96 μCAs the charge stored in each capacitor is the same, the energy stored in each capacitor is the same.Now the energy stored in each capacitor is given by:C1 = (1/2) * (Q/C1)^2 = (1/2) * (48 x 10^-6 / 4 x 10^-6)^2 = 1.152 J.C2 = (1/2) * (Q/C2)^2 = (1/2) * (48 x 10^-6 / 4 x 10^-6)^2 = 1.152 J.Therefore, the energy stored in each capacitor after the switch has been closed for a very long time is 1.152 J.What is the capacitor?A capacitor is a device that stores electrical energy in an electric field by collecting electrons on one plate and donating electrons from the other plate. The plates are separated by a dielectric, which is an insulating material. Capacitors are used in a variety of applications, including power conditioning, signal processing, and radio tuning.

Learn more about energy here:

https://brainly.com/question/1932868

#SPJ4

Answer:

26.946cm³

Explanation:

d=m/v

d=45g/1.67g/cm³

d=26.946cm³

The net magnetic field at the center of the square is 6.68 x 10^-4 T, pointing perpendicular to the plane of the square.

Using the formula for the magnetic field produced by a straight wire, we can calculate the magnetic field produced by each of the wires along the sides of the square at the center:

B = (μ0/4π) * (2I/r)

where B is the magnetic field, I is the current, r is the distance from the wire, and μ0 is the permeability of free space.

The distance from the center of the square to each wire is:

r = (14.913/2) / √2 = 5.277 cm

Substituting the values, we get:

B = (4π x 10^-7 T m/A) * (2 x 2.338 A / 0.05277 m) = 1.67 x 10^-4 T

Since there are two wires along the horizontal side and two wires along the vertical side, the total magnetic field at the center of the square is:

Btotal = 2B + 2B = 4B = 6.68 x 10^-4 T

To know more about magnetic field, here

brainly.com/question/29206613

#SPJ4

--The complete question is, Four wires running through the corners of a square with sides of length 14.913 cm carry equal currents, 2.338 A. Calculate the magnetic field at the center of the square.--

According to NASA, the perihelion distance of Vesta is approximately 2.15 (AU), or about 200 million miles (320 million kilometers) from the Sun.

The perihelion distance of Vesta is the point in its orbit where it is closest to the Sun. To find this distance, follow these steps:

1. Locate Vesta and the Sun in a solar system map or simulation.

2. Identify the pericenter, which is the point on Vesta's orbit marked with a bar, indicating its closest approach to the Sun.

3. Use the measurement tool to measure the distance between the Sun and Vesta at the pericenter.

The point at which the orbit comes closest to the parent body (the pericenter) is marked with a bar.

to know more about perihelion distance refer here:

https://brainly.com/question/28644653#

#SPJ11

Answer:

325 metre per second

Explanation:

since v=f x lamda. where lamda is wavelength and f is frequency and v is speed of sound

The speed of sound in air is 325 m/s. The speed of sound in air can be determined by multiplying the wavelength by the frequency.

The following formula can be used to determine the sound speed in air:

v = fλ

Where v is the speed of sound, f is the frequency of the sound wave, and λ is the wavelength of the sound wave.

In this case, the frequency of the sound wave is given as 250 Hz and the wavelength is given as 1.3 meters. Therefore, we can plug these values into the formula and solve for the speed of sound:

v = (250 Hz) x (1.3 m) = 325 m/s

So, the speed of sound in air with a frequency of 250 Hz and a wavelength of 1.3 meters is 325 meters per second.

To know more about speed of sound in air click here:

brainly.com/question/2279936

#SPJ11