PLEASE HELP! 80 POINTS
Create a VESPR drawing for
NH3
CH20
N3
SO2CI2
BrF5

Answer:

0.214 J/g.°C

Explanation:

Step 1: Given data

Step 2: Calculate the specific heat of the substance (c)

The specific heat of the substance is an intrinsic property of a substance. We can calculate it using the following expression.

Q = c × m × ΔT

c = Q / m × ΔT

c = 1287.424 J / 752 g × 8 °C = 0.214 J/g.°C

Answer: Boiling because it makes the molecules in water bounce around.

Hope it helps.

Answer:

B. potential energy

Explanation:

Potential energy ( Mechanical in this case ) is energy stored by force. so If you are compressing a spring you are increasing more potential to it by force.

Answer:

a because the x and y value is the same

The buffer can be made using an acid or a base.

We have to know that the term buffer is the generic term that can be generally used to describe any solution that is resistant to changes in acidity and the alkalinity of the solution.

We know that we can be able to make a buffer in two ways;

1) By the use of a weak acid and its salt

2) By the use of weak base and its salt.

In each case, the pH of the solution that has been formed would not be easily changed and this is the job of the buffer.

Learn more about buffer:https://brainly.com/question/22821585?

#SPJ1

Answer:

sorry I don't know

Explanation:

have a great time with your family and friends

Answer:

The 2nd, 4th, and 7th options

Explanation:

Answer:

Each of two or more forms of the same element that contain equal numbers of protons but different numbers of neutrons in their nuclei, and hence differ in relative atomic mass but not in chemical properties; in particular, a radioactive form of an element. Hope this helps, have a good day! :)

Answer:

atoms with the same number of protons and electrons but different numbers of neutrons

Explanation:

Answer:

1720.8g water are necessaries

Explanation:

Mass percent is defined as the mass of solute (In this case, MgCl2) in 100g of solution (Mass MgCl2 + Mass water). To solve this question we must find the mass of solution that we need to produce th 1.5% by mass solution. Thus, we can find the mass of water that we need as follows:

Mass solution:

26.2g MgCl2 * (100g Solution / 1.5g MgCl2) = 1747g solution

Mass water:

1747g solution - 26.2g MgCl2 = 1720.8g water are necessaries

Answer:

9.42 g

Explanation:

Step 1: Write the balanced equation

2 Al + 3 Cl₂ ⇒ 2 AICI₃

Step 2: Calculate the moles corresponding to 11.727 L of Cl₂

Since the conditions are not specified, we will assume Cl₂ is at standard temperature and pressure. At STP, 1 mole of Cl₂ occupies 22.4 L.

11.727 L × 1 mol/22.4 L = 0.524 mol

Step 3: Calculate the moles of Al needed to react with 0.524 moles of Cl₂

The molar ratio of Al to Cl₂ is 2:3. The moles of Al needed are 2/3 × 0.524 mol = 0.349 mol

Step 4: Calculate the mass corresponding to 0.349 moles of Al

The molar mass of Al is 26.98 g/mol.

0.349 mol × 26.98 g/mol = 9.42 g

Answer: The answer is B) 1.00 M CaCl2

Explanation: I just did it on usatestprep and it said it was correct .

Answer:   It takes 285.8 kJ of energy to form one mole of water

Explanation:

The enthalpy of formation of a substance is the change in enthalpy that occurs when a substance is formed from its elements in their standard states. The enthalpy of the formation of water is -285.8 kJ/mol, which means that it takes 285.8 kJ of energy to form one mole of water from its elements (hydrogen and oxygen) under standard conditions. This value is negative, which means that the formation of water releases energy. This is why water is often referred to as an "exothermic" substance because it releases energy when it is formed. The negative value of the enthalpy of formation for water can be explained by the fact that the bonds formed between hydrogen and oxygen atoms in water are stronger than the bonds between hydrogen and oxygen atoms in the individual elements. This means that it takes less energy to break the bonds in the elements than it releases when the bonds in water are formed, resulting in a net release of energy.

For more information about Enthalpy;

https://brainly.com/question/11317028

Answer:

This means that 285.8 kJ/mol is evolved when one mole of water is formed.

What is the enthalpy of formation?

The term enthalpy of formation has to do with the energy that is released or absorbed when a molecule of water if formed from its constituents.

The fact that the enthalpy of formation of water is -285.8 kJ/mol implies that 285.8 kJ/mol is evolved when one mole of water is formed.

Explanation:

Answer:

here's the answer.hope it helps

1 mole of magnesium atoms will react with 2 moles of oxygen molecules. This is because the chemical equation for the reaction between magnesium and oxygen is: Mg + O2 → MgO.

A chemical equation is a symbolic representation of a chemical reaction, showing the reactants (starting materials) on the left side and the products (resulting substances) on the right side. The symbols used to represent the reactants and products are chemical formulas, which use the symbols of the elements in the reaction. The arrow between the reactants and products indicates the type of reaction taking place. The coefficients next to the symbols and formulae of entities indicate the number of moles of each species that are involved in the reaction. The overall reaction is balanced when the number of atoms of each element on the left side of the equation is equal to the number of atoms of that element on the right side of the equation.

This equation shows that for every 1 mole of magnesium atoms, 2 moles of oxygen molecules are required for the reaction to take place. Therefore, 1 mole of magnesium atoms will react with 2 moles of oxygen molecules.

To learn more about chemical equation
https://brainly.com/question/13847161
#SPJ1

Answer:

THE RIGHT ONE IS THE NERVOUS SYSTEM

Explanation:

THE EXPLANATION IS THAT : The nervous system is the part of an animal's body that coordinates its behavior and transmits signals between different body areas. In vertebrates it consists of two main parts, called the central nervous system (CNS) and the peripheral nervous system (PNS). The CNS contains the brain and spinal cord.

Answer:

The pond has more energy because I is so much larger that the Cup of boiling water. Since that mass of the pond is so much larger, It is generating more energy than a boiling cup of water.

To find the density of the unknown piece of metal, we can use the formula:

Density = mass / volume.

To know more about density , check out :

https://brainly.com/question/1354972

#SPJ1

Answer:

the movement of particles from a higher consentration to a lower consentration through a mechanical support.

Explanation:

Answer:

(E)

Explanation:

When aqueous solutions are added together, one of the products is s solid.

Answer:

A: The atomic number increases by one, but the mass number does not change.

Answer:

Option 1

Explanation:

The question is asking us what formula is used to obtain the quantity of heat added to a given mass of mercury in order to cause its temperature to change.

This quantity of heat is obtained from;

q = mcspΔT

Where;

q = quantity of heat added

m = mass of the mercury

csp= specific heat capacity of mercury

ΔT = temperature change

Answer:

kinetic

Explanation:

hope this helps

Answer:

Kinetic energy

Explanation:

Answer:

ffffffffffffff

Explanation:

vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv

Answer:

V = 750 cm³

Explanation:

The volume of the solution can be calculated by the following formula:

[tex]V = \frac{M}{C}[/tex]

where,

V = Volume of solution = ?

M = Mass of Calcium Chloride = 9 g

C = Concentration of Solution = 12 g/dm³

Therefore,

[tex]V = \frac{9\ g}{12\ g/dm^3}\\\\V = (0.75 dm^3)(\frac{1000\ cm^3}{1\ dm^3})[/tex]

V = 750 cm³

Answer:

You didnt give me a molarity so ill show you how to solve it with an equation

Explanation:

Molarity represent by M

M= mols/ Volume (in liters)

so mols = (whatever the molarity was) x (.100L because it is =100ml)

Mols=  M x (.100)

plug in the molarity you have for x and you are done

Answer: ew i hate science but ive done that same thing before i dont remember the answers though

Explanation:

Answer:

The pressure will be 0.4 atm.

Explanation:

The gas laws are a set of chemical and physical laws that allow determining the behavior of gases in a closed system. The parameters evaluated in these laws are pressure, volume, temperature and moles.

As the volume increases, the gas particles (atoms or molecules) take longer to reach the walls of the container and therefore collide with them less times per unit of time. This means that the pressure will be lower because it represents the frequency of collisions of the gas against the walls. In this way pressure and volume are related, determining Boyle's law which says:

"The volume occupied by a certain gaseous mass at constant temperature is inversely proportional to pressure"

Boyle's law is expressed mathematically as:

P*V= k

If you initially have the gas at a volume V1 and press P1, when the conditions change to a volume V2 and pressure P2, the following is satisfied:

P1*V1= P2*V2

In this case:

Replacing:

1.2 atm* 4 L= P2* 12 L

Solving:

[tex]P2=\frac{1.2 atm*4 L}{12 L}[/tex]

P2= 0.4 atm

The pressure will be 0.4 atm.

Explanation:

The standard model of particle physics is a relativistic theory of quantum fields developed between 1970 and 1973 [citation needed] based on the ideas of unification and symmetries [1] that describes the fundamental structure of matter and vacuum considering the elementary particles as irreducible entities whose kinematics is governed by the four known fundamental interactions (except for gravity, whose main theory, general relativity, does not fit the mathematical models of the quantum world). The word "model" in the name comes from the 1970s when there was not enough experimental evidence to confirm the model. [1] To date, almost all experimental tests of the three forces described by the standard model are in agreement. with their predictions. However, the standard model falls short of being a complete theory of fundamental interactions due to several unresolved issues.

Answer:

a)  [tex]T_b=590.775k[/tex]

b)  [tex]W_t=1.08*10^4J[/tex]

d)  [tex]Q=3.778*10^4J[/tex]

d)  [tex]\triangle V=4.058*10^4J[/tex]

Explanation:

From the question we are told that:

Moles of N2 [tex]n=2.50[/tex]

Atmospheric pressure [tex]P=100atm[/tex]

Temperature [tex]t=20 \textdegree C[/tex]

                      [tex]t = 20+273[/tex]

                     [tex]t = 293k[/tex]

Initial heat [tex]Q=1.36 * 10^4 J[/tex]

a)

Generally the equation for change in temperature is mathematically given by

[tex]\triangle T=\frac{Q}{N*C_v}[/tex]

  Where

  [tex]C_v=Heat\ Capacity \approx 20.76 J/mol/K[/tex]

[tex]T_b-T_a=\frac{1.36 * 10^4 J}{2.5*20.76 }[/tex]

[tex]T_b-293k=297.775[/tex]

[tex]T_b=590.775k[/tex]

b)

Generally the equation for ideal gas is mathematically given by

 [tex]PV=nRT[/tex]

For v double

 [tex]T_c=2*590.775k[/tex]

 [tex]T_c=1181.55k[/tex]

Therefore

[tex]PV=Wbc[/tex]

[tex]Wbc=(2.20)(8.314)(1181_590.778)[/tex]

[tex]Wbc=10805.7J[/tex]

Total Work-done [tex]W_t[/tex]

[tex]W_t=Wab+Wbc[/tex]

[tex]W_t=0+1.08*10^4[/tex]

[tex]W_t=1.08*10^4J[/tex]

c)

Generally the equation for amount of heat added is mathematically given by

[tex]Q=nC_p\triangle T[/tex]

[tex]Q=2.20*2907*(1181.55-590.775)\\[/tex]

[tex]Q=3.778*10^4J[/tex]

d)

Generally the equation for change in internal energy of the gas is mathematically given by

[tex]\triangle V=nC_v \triangle T[/tex]

[tex]\triangle V=2.20*20.76*(1181.55-293)k[/tex]

[tex]\triangle V=4.058*10^4J[/tex]

From the balanced equation of the reaction, the mole ratio of the reactants is 1:3.

Mole of 50.0 g [tex]Fe_2O_3[/tex] = 50/160 = 0.3125 mol

Mole of 10.0 g CO = 10/28 = 0.3571 mol

Stoichiometric equivalent of  [tex]Fe_2O_3[/tex] = 0.3571/3 = 0.1190 mol

In other words,  [tex]Fe_2O_3[/tex] is in excess.

Excess mole = 0.3125 - 0.1190 = 0.1935 mol

Mass of 0.1935 mol [tex]Fe_2O_3[/tex] = 0.1935 x 160 = 30.96 grams

Mole ratio of CO to Fe = 3:2

Equivalent mole of Fe that would be formed = 0.3571 x 2/3

                                                                          = 0.2381 mol

Mass of 0.238 mol Fe = 0.238 x 56 = 13.328 grams

Percent yield of Fe = 11.5/13.328 x 100 = 86.28%

Mole of 75 gk CO2 = 75000/44 = 1704.55 mol

Mole ratio of CO2 and Co = 1:1

Equivalent mole of CO = 1704.55 mol

Mass of 1704.55 mol CO = 1704.55 x 28 = 47.73 kg

80.7% = 47.73 kg

100% = 100 x 47.73/80.7

        = 59.14 kg

In other words, 59.14 kg of CO would be needed.

More on stoichiometric problems can be found here: https://brainly.com/question/29856106

#SPJ1