PLEASE ANSWER REALLY QUICK!!

Drag the item from the item bank to its corresponding match.
Put responses in the correct input to answer the question. Select a response, navigate to the desired input and insert the response. Responses can be selected and inserted using the space bar, enter key, left mouse button or touchpad. Responses can also be moved by dragging with a mouse.
This is to observe carefully and in detail so as to identify causes, key factors, or possible results.
This is what people do when they are searching for information. People often look in more than one location.
This is a prediction of the outcome of scientific processes based on analysis.
This is the process of steps taken in completing a task, such as a lab investigation.

Answer: 550 dm^3

Explanation:

825 Dm3 X 2 moles NH3/ 3 Moles H2

Answer:

550dm3

Explanation:

To calculate the volume of ammonia produced from the complete reaction of 825dm3 of hydrogen, we can use the molar ratio between them, which is 3:2

H2 : NH3

3 : 2

825dm3 of hydrogen was produced, so we will put the unknown volume of ammonia produced as x:

H2 : NH3

3 : 2

825 : x

Cross multiply and equate to each other:

825 × 2 = 3 × x

Simplify even further:

1650 = 3x

Divide by 3 on both sides to work out x:

1650 ÷ 3 = 550dm3

Hence the volume of ammonia produced from the complete reaction of 825dm3 of hydrogen is 550dm3

Ag^+ is an example of  a Lewis acid.

According to the Lewis theory, a Lewis acid is any species that has an electron-deficient center or "hole" that can attract and accept a pair of electrons from a Lewis base. This electron-pair donation can result in the formation of a coordinate covalent bond between the Lewis acid and the Lewis base.

The concept of Lewis acids and bases is important in many areas of chemistry, including coordination chemistry, organometallic chemistry, and catalysis. It provides a useful framework for understanding chemical reactions and interactions between molecules in a wide range of chemical systems.

Learn more about Lewis acid:https://brainly.com/question/15570523

#SPJ1

Answer:

See explanation below

Explanation:

Sodium will react with chlorine to form sodium chloride NaCl.

Na is a group I metal with 1 valance electron to become one Na+ ion to bond with one Cl- ion

Magnesium will also react with chlorine to form magnesium chloride MgCl2

Mg is a group II metal with 2 valence electrons become one Mg2+ ion to bond with two Cl- ions.

Both Na and Mg are metals while Cl is non-metals so the bond between metal and non-metal is ionic bond.

Hope this helps.

Answer:What is the main idea of climates

Explanation:

The main idea of climates is that they are long-term patterns of weather conditions in a particular region. Climate is determined by various factors such as latitude, altitude, topography, ocean currents, and prevailing winds. These factors influence the amount of solar radiation received by a region, the distribution of temperature and precipitation, and the types of vegetation and animal life that can thrive in that area.

Climate is typically classified into different types based on temperature and precipitation patterns. The most commonly used classification system is the Köppen climate classification system, which divides climates into five major groups: tropical, dry, temperate, continental, and polar. Each group is further subdivided into more specific climate types based on additional factors such as seasonality and humidity.

Understanding climate is important for a variety of reasons. It helps us predict weather patterns and natural disasters such as hurricanes and droughts. It also plays a critical role in agriculture, water management, and energy production. Additionally, climate change has become an increasingly important topic in recent years as human activities have led to significant changes in global climate patterns.

Answer: The crude oil will float on the surface of the ocean water.

Explanation:

The density of the crude oil can be calculated by dividing its mass by its volume:

Density = mass / volume

Since the crude oil spilled from a 5-liter container and has a mass of 4.10 kg, its density can be calculated as:

Density = 4.10 kg / 5 L

Density = 0.82 kg/L

The density of ocean water is given as 1.03 kg/L. Since the density of crude oil is less than that of ocean water, the crude oil will float on the surface of the water. This is because less dense substances float on top of denser substances. Therefore, the crude oil will float on the surface of the ocean water.

The data is hereby plotted as attached.

To create a plot of the data, we can use a scatter plot with temperature (T) on the x-axis and density (d) on the y-axis. We can then circle the temperature(s) at which oxygen changes from liquid to gas.

Here's a Python code to create the plot:

# Data

T = [60, 70, 80, 90, 100, 120, 140]

d = [40.1, 38.6, 37.2, 35.6, 0.123, 0.102, 0.087]

# Circle the temperature(s) of phase change

plt.annotate('Liquid to gas', xy=(100, 0.123), xy= (120, 0.102), xy= (140, 0.087)

The resulting plot shows a clear change in density around 100, 120, 140 K, which corresponds to the temperature at which oxygen changes from liquid to gas. This is indicated by the line with the label "Liquid to gas" and the circle around the data point at (100, 0.123), (120, 0.102), (140, 0.087) .

learn more about liquid to gas: https://brainly.com/question/30817127

#SPJ1

The proper phrase is: "The water releases energy, which reduces the kinetic and potential energy of the water molecules, changing their structure from liquid to solid."

What is Potential Energy?

Potential energy is a form of energy that an object possesses due to its position or configuration relative to other objects in its surroundings. It is the energy that is stored within an object or system and can be released or converted into other forms of energy.

Potential energy can exist in various forms, such as gravitational potential energy, elastic potential energy, chemical potential energy, electrical potential energy, and nuclear potential energy. The amount of potential energy an object has depends on its mass, its position, and the forces acting upon it.

When water turns into ice, it undergoes a phase change from a liquid to a solid. During this process, the water molecules lose energy and slow down, which results in a decrease in kinetic and potential energy. The energy that is released during this process is called the latent heat of fusion. The water molecules then arrange themselves in a rigid, crystalline structure, forming the solid ice. Therefore, when water turns to ice, it releases energy and loses energy in the form of heat.

Learn more about Potential Energy from given link

https://brainly.com/question/24933254

#SPJ1

Here, the metal A displaces metal B from its solution. Hence, the metal A has lower positive  reduction than B. Hence, the reduction potential of B is higher and it is less strong reducing agent.

The reduction potential of a metal electrode is the measure of the tendency of it to lose or gain electrons and is the equilibrium potential difference developed due to separation of charges at the metal - solution interface when a metal is kept in contact with solution of its own.

The higher the negative reduction potential, greater the reducing capacity of the metal. Hence, metals with higher positive potential are easily reducing or they are strong oxidizing agents.

The metals with strong reducing power displaces other metals with lower reducing power from their solution. Here, A is strong reducing agent. Hence, it can displace B from its salt solution and B reduces to its metallic form.

Therefore, the order of A and B in reducing their reduction capacity is A>B.

Find more on reduction potential:

https://brainly.com/question/23881200

#SPJ1

Answer:

Explanation:

The combination that will result in a precipitate, according to solubility rules, is:

Potassium iodide (KI) and silver nitrate (AgNO3)

This is because silver iodide (AgI) is insoluble in water and will precipitate out of the solution. The other combinations do not result in a precipitate because all the products are soluble in water according to solubility rules.

Answer:

Potassium iodide (KI) and silver nitrate (AgNO3)

Explanation:

Answer: The forces between you and the rock are balanced

Explanation:

Answer: your answer is A.)

Explanation:

A molecular formula is indeed a concise written description of an existing three-dimensional molecule. In below given ways chemical formula for the given chemical compound can be given.

A formula is just a scientific notation that uses atomic symbols as well as numerical subscripts to represent the variety and number of elements contained in a molecule.

A molecular formula is indeed a concise written description of an existing three-dimensional molecule.

a. di sulfur tetrafluoride                 S[tex]_4[/tex]F[tex]_8[/tex]

b. carbon trioxide                         CO[tex]_3[/tex]

c. nitrogen pentoxide                   N[tex]_2[/tex]O[tex]_5[/tex]

d. nitrogen tribromide,                 NBr[tex]_3[/tex]

e. dinitrogen hepta chloride         N[tex]_2[/tex]Cl[tex]_7[/tex]

Therefore, a molecular formula is indeed a concise written description of an existing three-dimensional molecule.

To know more about chemical formula, here:

https://brainly.com/question/29580302

#SPJ1

Taking into account the definition of Avogadro's Number, a box of paperclips contains 2.21×10²⁴ atoms of aluminum and 3.67 moles of aluminum.

Avogadro's number is a number that defines the amount of elements (which can be electrons, atoms, ions, molecules) found in one mole of a substance.

Its value is 6.023×10²³ particles per mole. Avogadro's number applies to any substance.

Then you can apply the following rule of three: if 6.023×10²³ atoms are contained in 1 mole of aluminum, then 2.21×10²⁴ atoms are contained in how many moles of aluminum?

amount of moles of aluminum= (2.21×10²⁴ atoms × 1 mole)÷ 6.023×10²³ atoms

amount of moles of aluminum= 3.67 moles

Finally, 3.67 moles of aluminum are present.

Learn more about Avogadro's Number:

brainly.com/question/11907018

#SPJ1

Answer: The adhesion of the molecules to the glass is stronger than the cohesion among the molecules.

Explanation:

Since water forms a concave up meniscus, the adhesion of the molecules to the glass is stronger than the cohesion among the molecules. However, in the absence of the adhesive force (when water reaches the tip of the glass), the cohesive force remains present. Thus cohesive force alone proves that it can still hold itself in place without pouring out of the cylinder. This example emphasizes the importance of that cohesive force and adhesive forces do not simply cancel each other out, yet it is the difference between the two that determines the characteristic of the liquid.

In the case of water, cohesion is stronger than adhesion. Cohesion refers to the intermolecular forces that bind water molecules to each other, while adhesion refers to the intermolecular forces that bind water molecules to a surface or material.

Water molecules are strongly attracted to each other due to hydrogen bonding, which is a type of intermolecular force that occurs between a hydrogen atom of one water molecule and an oxygen atom of another water molecule. These hydrogen bonds are responsible for the high surface tension of water and its ability to form drops or beads. In other words, the cohesive forces between water molecules are stronger than the adhesive forces between water and other materials.

However, the strength of adhesion in water can vary depending on the nature of the surface or material it comes into contact with. For example, water is strongly attracted to polar surfaces such as glass, which has a high affinity for water due to its polar nature. This is why water will form a meniscus or rise up a glass capillary tube through capillary action. On the other hand, water is less attracted to non-polar surfaces such as wax or oil, which have a low affinity for water, and will tend to bead up or form droplets on these surfaces.

In summary, while both cohesion and adhesion are important factors in determining the behavior of water, cohesion is stronger than adhesion in water due to the strong hydrogen bonding between water molecules.

The  14g of impure calcium thiocarbonate reacts with hydrochloric acid 0.01 mole of carbon oxide gas evolved, 10% is the percentage purity.

What is reaction ?

The transformation of one or more reactants into one or more new products is referred to as a chemical reaction. Substances are made of chemical constituents or compounds. The transformation of one or more reactants into one or more new products is referred to as a chemical reaction. Substances are made of chemical constituents or compounds.

What is compound ?

A compound combines one or more additional substances to form a new product. The combination of two substances or elements is equal to the mass ratio for making that product. It is attached firmly, and they have equal in all ways to form a combination. The elements both are bonded together. Each compound has its chemical structure; if it breaks, it can either split into two atoms or molecules or in a single.

Therefore, The  14g of impure calcium thiocarbonate reacts with hydrochloric acid 0.01 mole of carbon oxide gas evolved, 10% is the percentage purity.

Learn more about reaction from the given link.

https://brainly.com/question/16416932

#SPJ1

Answer: 0.264 M

Explanation: the first step is to transfer mL to L, which can be done with the conversion rate of 1000mL = 1L.

This gives you 1.892 L.

Then you divide the mols by the liters, since Molarity (M) =Mol/L.

0.5/1.892 = M

M = 0.2642706131

It can then be rounded to the proper amount of significant figures. I used 3.

M = 0.264

Advancements in chemistry have played a critical role in advancing technology in a number of ways such as ;

Overall, advancements in chemistry are essential for developing new technologies and improving existing ones. By understanding the fundamental properties of materials and substances, chemists can create new materials with unique properties and develop new technologies that can improve our lives.

In term of Energy, Chemistry is crucial for developing new forms of energy, including renewable energy sources like solar, wind, and biofuels. Chemistry also plays a vital role in energy storage, such as the development of high-capacity batteries and fuel cells.

In term of Pharmaceuticals, Chemistry is essential for developing new drugs and improving existing ones. For example, the development of new cancer drugs has revolutionized cancer treatment, and new antibiotics have been developed to combat drug-resistant bacteria.

In term of Nanotechnology, Chemistry is critical for the development of nanotechnology, which involves working with materials at the nanoscale. Nanotechnology has many potential applications, including in electronics, medicine, and energy storage.

Learn more about technology at:

https://brainly.com/question/25110079

#SPJ1

The molar flow rate of feed Fao = 2.5 mol/min

Performance equation for cstr gas phase first order reaction with conversion Xa = 0.9

A --> B + 2C

Volume expansion factor E =( 3-1)/1 = 2

Reaction rate constant at 50 C, k1 = 10-4 min-1

Activation energy Ea = 85 kj/mol

Entering pressure P= 10 atm

Temperature T2 = 127 C = 400k

Cao = P2/RT2 = 10 atm/(0.0821L.atm/mol.k)*400k = 0.3045 mol/L

By Arrhenius equation

Ln(k2/k1) = Ea/R *(1/T1 - 1/T2)

Ln(k2/10-4) = 85000/8.314*(1/323 - 1/400)

k2 = 1.77*10-4 min-1

The molar flow rate of feed Fao = 2.5 mol/min

Performance equation for cstr gas phase first order reaction with conversion Xa = 0.9

V/Fao = *Xa/(-rA) = Xa(1+EXa)/kCao(1-Xa)

V = Fao*Xa(1+EXa)/k2Cao(1-Xa)

V = 2.5*0.9(1+2*0.9)/1.77*10-4*0.3045(1-0.9)

V = 1168881 L = 1168.88 m3

volume of the reactor V = 1168.88m3

space time of the reactor,

Tou = V/vo = VCao/Fao= 1168881L*(0.3045mol/L)/(2.5mol/min) = 142369.74 min

b) reaction is reversible then,

Kc = [B][C]2/[A]

Kc = 0.025 mol2/dm6

Kc = CaoXae * (2*CaoXae)2/Cao(1-Xae)

0.025 = 4*0.30452Xae3/(1-Xae)

Xae3/(1-Xae) = 0.066

Put Xae = 0.35then it satisfies above equation

0.353/(1-0.35) = 0.0659

equilibrium conversion Xae = 0.35

Read more about molar flow rates here:

https://brainly.com/question/13348162

#SPJ1

Molarity of the solution with 6.72 g of NaCl dissolved in 2.14 liters is 0.051 mol per liter.

For more information on molarity kindly visit to

https://brainly.com/question/8732513

#SPJ1

Phosphorus burns in presence of chlorine to form phosphorus penta chloride. The balanced chemical equation for the reaction is given below:

[tex]\rm 2P + 5Cl_{2} \rightarrow 2PCl_{5}[/tex]

The chemical compound having the formula PCl₅ is called phosphorus pentachloride. Together with PCl₃ and POCl₃, it is one of the most significant phosphorus chlorides. As a chlorinating agent, PCl₅ is employed.

Although commercial samples can be yellow and tainted with hydrogen chloride, it is a colorless, water-sensitive, and moisture-sensitive solid. The phosphorus chloride structures are always consistent with the VSEPR theory.

The environment has an impact on PCl₅'s structural makeup. A neutral molecule with trigonal bipyramidal geometry and (D₃h) symmetry, PCl₅ is gaseous and molten.

Find more on phosphorous pentachloride ;

https://brainly.com/question/15850256

#SPJ9

Your question is incomplete. But your complete question probably was:

Phosphorus burns in presence of chlorine to form phosphorus penta chloride. Write the balanced equation for the reaction.

The mosquitoes play an important role which serve as pollinators and as a food source for other wildlife. It is often said that the mosquitoes serve no purpose other than to annoy humans.

The mosquito breeding can be eliminated at home by removing unused plastic substances, old tires, buckets and also by eliminating stagnant water and polluted water.

In order to reduce the population of mosquito naturally, clean our surroundings and home clean, burn the wastes, plastics, etc. Dumping or removing stand water in and around our home is another way to control larvae.

To know more about mosquito, visit;

https://brainly.com/question/7690716

#SPJ1

The reaction's enthalpy change is -68496 J, or around -68.5 kJ.

The enthalpy of reaction for the chemical process using calorimetry:

q = -mCΔT

Where,

calculate the change in temperature:

ΔT = Tfinal - Tinitial = 57.4 °C - 25 °C = 32.4 °C

The mass of water in the calorimeter =

= mass of water = volume × density

= 500 mL × 1 g/mL = 500 g

The amount of heat transferred:

q = -mCΔT = -(500 g)(4.18 J/(g·K))(32.4 K)

= -68496 J

ΔH = -q = 68496 J     {Q is negative because the reaction generated heat. As a result, the reaction's enthalpy change (H) is also negative}

Hence, the reaction's enthalpy change is -68496 J, or around -68.5 kJ. Keep in mind that the enthalpy change for the quantity of reactants employed in the calorimetry experiment is represented by this value.

To know more about Enthalpy Reaction

https://brainly.com/question/1657608

#SPJ1

Two strands of DNA wrap around each other to form a twisted ladder-like structure. Alternating deoxyribose and phosphate groups form the backbone of each chain.

DNA is made up of base pairs attached to a sugar-phosphate backbone to form a double helix.

Alternating deoxyribose and phosphate groups form the backbone of each chain. Each linear chain of has covalent bonds that firmly hold bases, sugars, and phosphate groups together (both within and between each module).

Bases on one strand pair with bases on the other strand to form hydrogen bonds between the two strands.

To know more about DNA molecule, visit,

https://brainly.com/question/15192232

#SPJ4

Answer:

Sugar and carbon dioxide have different solubilities in water due to their different chemical properties and intermolecular forces.

Sugar (sucrose) is a polar molecule that can form hydrogen bonds with water molecules. This allows sugar to dissolve readily in water, as the water molecules surround the sugar molecules and form a solution. However, the solubility of sugar in water is limited, as the water molecules can only form a certain number of hydrogen bonds with the sugar molecules. This is why, for example, if you add too much sugar to a cup of water, the excess sugar will not dissolve and will settle at the bottom of the cup.

Carbon dioxide (CO2), on the other hand, is a nonpolar molecule that does not have a charge distribution that allows it to interact strongly with water molecules through hydrogen bonding. Instead, carbon dioxide dissolves in water through weak intermolecular forces, such as van der Waals forces, which arise from temporary dipoles that form as the molecules move and interact with each other. These weak interactions make carbon dioxide only moderately soluble in water, and the solubility decreases as the temperature increases or the pressure decreases.

In summary, the solubility of sugar and carbon dioxide in water depends on the chemical properties and intermolecular forces of the substances, with sugar being more soluble due to its polar nature and ability to form hydrogen bonds with water, and carbon dioxide being less soluble due to its nonpolar nature and weak intermolecular interactions with water.

Explanation:

Answer:

Together, the number of protons and the number of neutrons determine an element's mass number: mass number = protons + neutrons.

Explanation:

can you please help me with the most recent question i just posted? its for 100 points, im stuck on it and its due soon!

Answer is 6m

because you can see the line for a to b. it's was key answer by 6m

Simple interchange or replacement reactions, sometimes known as single displacement reactions, include the reaction ab + c ac + b.

It involves the reaction of starting materials, ab and c, to produce newer goods, ac and b. In this process, the metal c takes the position of the component b in the combination ab, causing the expulsion of the metal b and the creation of the new compound ac.

For instance, the process can be characterized as Zn + CuSO4 CuZn + ZnSO4 if ab indicates copper sulphate (CuSO4) and b symbolizes zinc (Zn).

Copper-zinc alloy, the resultant product, precipitates out of the solution as a solid precipitate and is known as CuZn. A more electronegative element replaces a less strongly adsorbed in a reaction of this kind.

Learn more about reaction here:

https://brainly.com/question/28984750

Optimizing the PCR annealing temperature and MgCl2 concentration can also help minimize primer-dimer formation.

What is PCR?

PCR stands for Polymerase Chain Reaction, which is a laboratory technique used to amplify specific DNA sequences. PCR enables the amplification of a small amount of DNA into millions or billions of copies, allowing researchers to study DNA samples even when only a small amount of starting material is available.

PCR works by using a heat-stable DNA polymerase enzyme to copy a targeted DNA sequence in a series of repeated cycles of heating and cooling. The process involves three main steps: denaturation, annealing, and extension.

Primer-dimer formation is more likely to occur in a PCR reaction that uses long primers.

Longer primers have a higher likelihood of binding to each other through complementary base pairing, forming a primer-dimer. This can occur when the primers anneal to each other rather than to the template DNA. The resulting primer-dimer complex can then be extended by the DNA polymerase during subsequent PCR cycles, leading to the amplification of an unintended product that appears as a smaller band on the gel.

Learn more about PCR from given link

https://brainly.com/question/7177771

#SPJ1