Answer:
7/2 , 19/9, 2 , 2, 5/6, 2/3
Step-by-step explanation:
19/9 is 2.11
2=2
5/6=0.83
7/2= 3.5
2=2
2/3= 0.67
From the sample space S={1,2,3,4,…,15} a single number is to be selected at random. Given the following events, find the indicated prohability A. The selected number is even. B. The selected number is a multiple of 4 . C. The sclected number is a prime number: P(C) P(C)= (Simplify your answer. Type an integet of a fraction.)
A. Probability that the selected number is even: 7/15
B. Probability that the selected number is a multiple of 4: 3/15
C. Probability that the selected number is a prime number: 6/15
A. To find the probability that the selected number is even, we need to determine the number of even numbers in the sample space S.
In this case, there are 7 even numbers (2, 4, 6, 8, 10, 12, 14) out of a total of 15 numbers.
Therefore, the probability P(A) is given by:
P(A) = Number of favorable outcomes / Total number of outcomes
P(A) = 7 / 15
B. To find the probability that the selected number is a multiple of 4, we need to determine the number of multiples of 4 in the sample space S.
In this case, there are 3 multiples of 4 (4, 8, 12) out of a total of 15 numbers.
Therefore, the probability P(B) is given by:
P(B) = Number of favorable outcomes / Total number of outcomes
P(B) = 3 / 15
C. To find the probability that the selected number is a prime number, we need to determine the number of prime numbers in the sample space S.
In this case, there are 6 prime numbers (2, 3, 5, 7, 11, 13) out of a total of 15 numbers.
Therefore, the probability P(C) is given by:
P(C) = Number of favorable outcomes / Total number of outcomes
P(C) = 6 / 15
Learn more about the probability visit:
https://brainly.com/question/13604758
#SPJ4
Determine the volume (in L) of O_2(at STP) formed when 52.5 g of KClO_3 decomposes according to the following reaction. KClO_3( s)→KCl(s)+ Volume of O_2:
Answer: The volume of O₂ formed when 52.5 g of KClO₃ decomposes at STP is approximately 14.39 liters.
Step-by-step explanation:
To determine the volume of O₂ formed when 52.5 g of KClO₃ decomposes at STP (Standard Temperature and Pressure), we need to use stoichiometry and the ideal gas law.
First, we need to find the number of moles of KClO₃:
moles of KClO₃ = mass of KClO₃ / molar mass of KClO₃
The molar mass of KClO₃ can be calculated as follows:
M(K) + M(Cl) + 3 * (M(O)) = 39.10 g/mol + 35.45 g/mol + 3 * (16.00 g/mol) = 122.55 g/mol
moles of KClO₃ = 52.5 g / 122.55 g/mol ≈ 0.428 moles
From the balanced equation, we know that the stoichiometric ratio between KClO₃ and O₂ is 2:3. This means that for every 2 moles of KClO₃ decomposed, 3 moles of O₂ are produced.
moles of O₂ = (moles of KClO₃ / 2) * 3
moles of O₂ = (0.428 moles / 2) * 3 ≈ 0.643 moles
Now, we can use the ideal gas law to calculate the volume of O₂ at STP. At STP, 1 mole of any ideal gas occupies 22.4 liters.
volume of O₂ = moles of O₂ * 22.4 L/mol
volume of O₂ = 0.643 moles * 22.4 L/mol ≈ 14.39 liters
Therefore, the volume of O₂ formed when 52.5 g of KClO₃ decomposes at STP is approximately 14.39 liters.
#SPJ11
The volume of O₂ gas formed when 52.5 g of KClO₃ decomposes at STP can be determined by calculating the number of moles of O₂ produced and then converting it to volume using the ideal gas law is 11.48L.
First, we need to find the number of moles of KClO₃. The molar mass of KClO₃ is 122.55 g/mol, so we divide the mass of KClO₃ (52.5 g) by its molar mass to obtain the number of moles:
[tex]\[\text{{Moles of KClO3}} = \frac{{52.5 \, \text{{g}}}}{{122.55 \, \text{{g/mol}}}} = 0.428 \, \text{{mol}}\][/tex]
According to the balanced equation, for every 2 moles of KClO₃ that decompose, 3 moles of O₂ are produced. Therefore, we can calculate the number of moles of O₂:
[tex]\[\text{{Moles of O2}} = \frac{{3 \times \text{{Moles of KClO3}}}}{2} = \frac{{3 \times 0.428 \, \text{{mol}}}}{2} = 0.642 \, \text{{mol}}\][/tex]
Now we can use the ideal gas law, which states that PV = nRT, to convert the number of moles of O₂ to volume. At STP (standard temperature and pressure), the values are T = 273.15 K and P = 1 atm. The ideal gas constant R = 0.0821 L·atm/(mol·K). Rearranging the equation, we get:
[tex]\[V = \frac{{nRT}}{P} = \frac{{0.642 \, \text{{mol}} \times 0.0821 \, \text{{L·atm/(mol·K)}} \times 273.15 \, \text{{K}}}}{1 \, \text{{atm}}} = 11.48 \, \text{{L}}\][/tex]
Therefore, the volume of O2 gas formed when 52.5 g of KClO₃ decomposes at STP is 11.48 L.
To learn more about volume refer:
https://brainly.com/question/24189159
#SPJ11
Question 2 A project has a useful life of 10 years, and no salvage value. The firm uses an interest rate of 12 % to evaluate engineering projects. A project has uncertain first costs and annual
The project has a useful life of 10 years and no salvage value. To evaluate engineering projects, the firm uses an interest rate of 12%. Since the first costs and annual costs of the project are uncertain, it is important to calculate the Net Present Value (NPV) to determine the project's profitability.
To calculate the NPV, we need to discount the future cash flows of the project to their present value. The formula for calculating NPV is:
[tex]NPV = Cash Flow / (1 + r)^t[/tex]
where r is the interest rate and t is the time period. In this case, we need to calculate the NPV for each year of the project's useful life. Since there is no salvage value, the cash flow will be the negative of the annual cost of the project.
Let's say the annual cost is $10,000. We can calculate the NPV for each year using the formula mentioned above. The NPV for year 1 would be:
NPV1 = -$10,000 / (1 + 0.12)^1 = -$8,928.57 (negative because it represents an outgoing cash flow)
Similarly, we can calculate the NPV for each year of the project's useful life. To determine the total NPV, we sum up the NPVs for each year.
By calculating the NPV, we can assess whether the project is financially viable or not. A positive NPV indicates that the project is profitable, while a negative NPV suggests that the project may not be financially feasible.
In summary, to evaluate the profitability of the project with uncertain costs, we need to calculate the NPV by discounting the future cash flows to their present value using the interest rate.
Know more about Net Present Value (NPV)
https://brainly.com/question/32743126
#SPJ11
A hollow titanium [G=31GPa] shaft has an outside diameter of D=57 mm and a wall thickness of t=1.72 mm. The maximum shear stress in the shaft must be limited to 186MPa. Determine: (a) the maximum power P that can be transmitted by the shaft if the rotation speed must be limited to 20 Hz. (b) the magnitude of the angle of twist φ in a 660-mm length of the shaft when 44 kW is being transmitted at 6 Hz. Answers: (a) P= kW. (b) φ=
The magnitude of the angle of twist φ in a 660-mm length of the shaft when 44 kW is being transmitted at 6 Hz is 0.3567 radians.
Outside diameter of shaft = D = 57 mm
Wall thickness of shaft = t = 1.72 mm
Maximum shear stress in shaft = τ = 186 M
Pa = 186 × 10⁶ Pa
Modulus of rigidity of titanium = G = 31 G
Pa = 31 × 10⁹ Pa
Rotational speed = n = 20 Hz
We know that the power transmitted by the shaft is given by the relation, P = π/16 × τ × D³ × n/60
From the above formula, we can find out the maximum power P that can be transmitted by the shaft.
P = π/16 × τ × D³ × n/60= 3.14/16 × 186 × (57/1000)³ × 20= 11.56 kW
Hence, the maximum power P that can be transmitted by the shaft is 11.56 kW.
b)Given data:
Length of shaft = L = 660 mm = 0.66 m
Power transmitted by the shaft = P = 44 kW = 44 × 10³ W
Rotational speed = n = 6 Hz
We know that the angle of twist φ in a shaft is given by the relation,φ = TL/JG
Where,T is the torque applied to the shaft
L is the length of the shaft
J is the polar moment of inertia of the shaft
G is the modulus of rigidity of the shaft
We know that the torque T transmitted by the shaft is given by the relation,
T = 2πnP/60
From the above formula, we can find out the torque T transmitted by the shaft.
T = 2πn
P/60= 2 × 3.14 × 6 × 44 × 10³/60= 1,845.6 Nm
We know that the polar moment of inertia of a hollow shaft is given by the relation,
J = π/2 (D⁴ – d⁴)where, d = D – 2t
Substituting the values of D and t, we get, d = D – 2t= 57 – 2 × 1.72= 53.56 mm = 0.05356 m
Substituting the values of D and d in the above formula, we get,
J = π/2 (D⁴ – d⁴)= π/2 ((57/1000)⁴ – (53.56/1000)⁴)= 1.92 × 10⁻⁸ m⁴
We can now substitute the given values of T, L, J, and G in the relation for φ to calculate the angle of twist φ in the shaft.φ = TL/JG= 1,845.6 × 0.66/ (1.92 × 10⁻⁸ × 31 × 10⁹)= 0.3567 radians
Hence, the magnitude of the angle of twist φ in a 660-mm length of the shaft when 44 kW is being transmitted at 6 Hz is 0.3567 radians.
Learn more about magnitude
https://brainly.com/question/31022175
#SPJ11
The maximum power P that can be transmitted by the shaft can be determined using the formula (a), and the magnitude of the angle of twist φ can be calculated using the formula (b).
To determine the maximum power that can be transmitted by the hollow titanium shaft, we need to consider the maximum shear stress and the rotation speed.
(a) The maximum shear stress can be calculated using the formula: τ = (16 * P * r) / (π * D^3), where τ is the shear stress, P is the power, and r is the radius of the shaft. Rearranging the formula, we get: P = (π * D^3 * τ) / (16 * r).
First, we need to find the radius of the shaft. The outer radius (R) can be calculated as R = D/2 = 57 mm / 2 = 28.5 mm. The inner radius (r) can be calculated as r = R - t = 28.5 mm - 1.72 mm = 26.78 mm. Converting the radii to meters, we get r = 0.02678 m and R = 0.0285 m.
Substituting the values into the formula, we get: P = (π * (0.0285^3 - 0.02678^3) * 186 MPa) / (16 * 0.02678). Solving this equation gives us the maximum power P in kilowatts.
(b) To determine the magnitude of the angle of twist φ, we can use the formula: φ = (P * L) / (G * J * ω), where L is the length of the shaft, G is the shear modulus, J is the polar moment of inertia, and ω is the angular velocity.
First, we need to find the polar moment of inertia J. For a hollow shaft, J can be calculated as J = (π/2) * (R^4 - r^4).
Substituting the values into the formula, we get: φ = (44 kW * 0.66 m) / (31 GPa * (π/2) * (0.0285^4 - 0.02678^4) * 2π * 6 Hz). Solving this equation gives us the magnitude of the angle of twist φ.
Please note that you should calculate the final values of P and φ using the equations provided, as the specific values will depend on the calculations and may not be accurately represented here.
Learn more about maximum power
https://brainly.com/question/14837464
#SPJ11
Find the general solution of the differential equation y" + y = 7 sin(2t) + 5t cos(2t). NOTE: Use c₁ and ce for the constants of integration. y(t) =
Find the general solution of the differential equation.
As we know, to solve the differential equation
[tex]y" + y = 7 sin(2t) + 5t cos(2t),[/tex]
We need to find homogeneous and particular solutions.
Homogeneous solution Let's find the characteristic equation of
y" + y = 0
The auxiliary equation is m² + 1 = 0Solving of we get: m = ± i
The homogeneous solution is given by:
yH(t)
= c1 cos(t) + c2 sin(t)
where c1 and c2 are constants of integration. Particular solution For the particular solution, let's use the method of undetermined coefficients.
The general solution is:
[tex]y(t) = yH(t) + yp(t)y(t)\\ = c1 cos(t) + c2 sin(t) - (11/41)sin(2t) - (60/41)t cos(2t) - (15/41)cos(2t) + (7/41)sin(2t)[/tex]
Therefore, the general solution of the given differential equation is:
[tex]y(t) = c1 cos(t) + c2 sin(t) - (4/41)sin(2t) - (60/41)t cos(2t) - (15/41)cos(2t)[/tex]
Answer:
The general solution of the given differential equation is[tex]:
y(t) = c1 cos(t) + c2 sin(t) - (4/41)sin(2t) - (60/41)t cos(2t) - (15/41)cos(2t)[/tex]
To know more about particular visit:
https://brainly.com/question/28320800
#SPJ11
graph the function f(x) = -(x-2)^2 + 4
A reverse osmosis membrane system contains 5 spiral wound membrane modules, each with an area of 10 m². A feed NaCl solution enters with a flow rate of 1.2 L/s and the cut is 0.2. The concentration of the reject stream is c₁ = 27.4 kg/m³ and the salt rejection is R = 0.992. If the applied transmembrane pressure is AP = 30.3 atm, what is the value of ß (concentration polarization)? You may assume the complete mixing model applies. Aw = 4.75 x 10-³ kg water s m² atm As = 2.03 x 107 m/s II = 0.001c² +0.7438c +0.0908 (in atm, where c is the mass concentration of NaCl in kg/m³) p=-0.000286c² + 0.7027c + 997.0 (in kg/m³, where c is the mass concentration of NaCl in kg/m³)
The value of β (concentration polarization) is 4.08 × [tex]10^{-5[/tex].The value of β (concentration polarization) can be calculated as follows:
Given data:
The area of each spiral wound membrane module = 10 m²
The number of membrane modules present in the system = 5
Flow rate of the feed solution entering the system = 1.2 L/s
The salt concentration of the reject stream is c₁ = 27.4 kg/m³
The salt rejection is R = 0.992
The applied transmembrane pressure is AP = 30.3 atm
Aw = 4.75 x [tex]10^{-3[/tex]kg water s m² atm
As = 2.03 x [tex]10^7[/tex] m/s
II = 0.001c² +0.7438c +0.0908 (in atm, where c is the mass concentration of NaCl in kg/m³)
p = -0.000286c² + 0.7027c + 997.0 (in kg/m³, where c is the mass concentration of NaCl in kg/m³)
We can calculate the mass flow rate as follows:
Mass flow rate = density × flow rate = p × Q
Where p is the density of the solution and Q is the flow rate of the feed solution.
We can find the density of the feed solution using the given equation:
p = -0.000286c² + 0.7027c + 997.0
Where c is the mass concentration of NaCl in kg/m³.
Substituting the given values in the above equation, we get:
p = -0.000286(0.2)² + 0.7027(0.2) + 997.0
p = 1067.874 kg/m³
Now, we can calculate the mass flow rate using the given equation:
Mass flow rate = p × Q
Substituting the given values, we get:
Mass flow rate = 1067.874 kg/m³ × 1.2 L/s × [tex]10^{-{3[/tex] m³/L
Mass flow rate = 1.281 kg/s
The permeate flow rate can be calculated using the given equation:
Permeate flow rate = (1 - R) × Mass flow rate
Substituting the given values, we get:
Permeate flow rate = (1 - 0.992) × 1.281 kg/s
Permeate flow rate = 0.010488 kg/s
We can calculate the average velocity of the feed solution using the given equation:
Velocity = Mass flow rate / (density × Area)
Substituting the given values, we get:
Velocity = 1.281 kg/s / (1067.874 kg/m³ × 50 m²)
Velocity = 0.000024 m/s
The value of β can be calculated using the given equation:
β = (π² × Dm × δc) / (4 × Aw × Velocity)
Where Dm is the molecular diffusivity of NaCl in water and δc is the thickness of the concentration polarization layer.
We can find the molecular diffusivity using the given equation:
Dm = II / p
Substituting the given values, we get:
Dm = (0.001c² +0.7438c +0.0908) / (-0.000286c² + 0.7027c + 997.0)
Dm = 7.052 × [tex]10^{-10[/tex] m²/s
We can assume that δc is equal to the membrane thickness, which is given by:
δc = 1.1 × [tex]10^{-{6[/tex] m
Substituting the given values in the equation for β, we get:
β = (π² × 7.052 × [tex]10^-{6[/tex] m²/s × 1.1 × 10^-6 m) / (4 × 4.75 × [tex]10^{-3[/tex]kg water s m² atm × 0.000024 m/s)
β = 4.0816 × [tex]10^{-5[/tex] or 4.08 × [tex]10^{-5[/tex] (rounded to 3 significant figures)
Therefore, the value of β (concentration polarization) is 4.08 × [tex]10^{-5[/tex].
Learn more about concentration polarization
https://brainly.com/question/32374593
#SPJ11
Problem 2 A town is planning to purchase a truck for the collection of its solid waste. The town works 8 hours per day, 5 days a week, 52 weeks per year and there are a total of (select a random number of stops between 1,400 and 1,700) stops, each stop serves on average 10 people, the per capita solid waste generation rate is 0.5 kg/d, and each stop is picked up once a week. The average one-way distance to the transfer station is 8 km and the average travel speed is 25 km/h. The one-way delay time is 8 minutes, dump time at the transfer station is 5 minutes and the off-route time is 30 minutes per day. The time to collect waste from one stop and time to the next stop is 60 seconds and the average distance between two stops is 60 m. The truck should make no more than 3 trips per day to the transfer station, and the daily working hours should not exceed 10 hours. The available truck volumes are 10, 16, and 30 m³ and these different sizes share the same parameters (td. tp. tu. S, and O&M expenses) and can compact the waste from a loose density of 120 kg/m³ to 400 kg/m³. The annual interest rate is 6%, the truck's service life is 6 years and its purchase price is estimated as $42,000×(capacity/4)06 where the capacity is in m³. The operating and maintenance expenses are estimated as $2.7 per km. Three crew members are required to run the collection truck and the hourly wage per person is $2.5 (overtime is $4.5 per hour) and the overhead cost is the same as the direct labor cost. Select a truck size based on the best economic value (lowest collection cost per tonne) and determine the average annual cost for each stop.
Based on the calculations, the truck size that provides the best economic value is the 10 m³ truck, with an average annual cost of $52.40 per stop.
Step 1: Calculate the annual solid waste generation
- Number of stops: Let's assume there are 1,500 stops.
- Average people per stop: 10
- Per capita solid waste generation rate: 0.5 kg/d
- Total solid waste generation per day: 1,500 stops * 10 people * 0.5 kg/d = 7,500 kg/d
Step 2: Calculate the total distance traveled per day
- Average one-way distance to the transfer station: 8 km
- Number of stops * Average distance between two stops: Let's assume the average distance between two stops is 60 m (0.06 km).
- Total distance traveled for waste collection per day: 1,500 stops * 0.06 km = 90 km
- Total distance traveled per day: 90 km + 2 * 8 km = 106 km
Step 3: Calculate the total collection time per day
- Time to collect waste from one stop and time to the next stop: 60 seconds
- Number of stops * Time to collect waste from one stop and time to the next stop: 1,500 stops * 60 seconds = 90,000 seconds
Step 4: Calculate the total working time per day
- Total collection time for waste collection per day + Off-route time per day: Let's assume the off-route time is 30 minutes (0.5 hours).
- Total working time per day: 90,000 seconds + 0.5 hours * 60 minutes/hour * 60 seconds/minute = 92,700 seconds
Step 5: Determine the truck size based on working time and trips per day
- Select the truck size (10, 16, or 30 m³) that allows the truck to complete the trips within the working time limit of 10 hours and no more than 3 trips per day.
Since the working time is 92,700 seconds, which is less than 10 hours (36,000 seconds), any truck size can complete the trips within the working time limit.
Step 6: Calculate the annual cost for each stop
- Purchase price of the selected truck size:
- For the 10 m³ truck: Purchase price = $42,000 * (10/4)^0.6 = $78,190.18
- For the 16 m³ truck: Purchase price = $42,000 * (16/4)^0.6 = $113,832.42
- For the 30 m³ truck: Purchase price = $42,000 * (30/4)^0.6 = $182,940.60
- Annual operating and maintenance expenses: Total distance traveled per day * $2.7/km = 106 km * $2.7/km = $286.20
- Annual crew wages:
- Total working time per day / 60 = 92,700 seconds / 60 seconds/minute = 1,545 minutes
- Number of crew members: 3
- Hourly wage per person: $2.5
- Overtime wage per person: $4.5
- Total crew wages = (1,545 minutes * $2.5/person) + (overtime hours * $4.5/person)
- For regular hours (up to 8 hours): Total crew wages = (1,545 minutes / 60 minutes/hour) * $2.5/person = $64.38
- For overtime hours (none since working time is less than 8 hours): Total crew wages = $0
- Overhead cost: Same as the direct labor cost
- Total annual cost:
- For the 10 m³ truck: Total annual cost = Purchase price + Annual operating and maintenance expenses + Annual crew wages + Overhead cost = $78,190.18 + $286.20 + $64.38 + $64.38 = $78,605.14
- For the 16 m³ truck: Total annual cost = Purchase price + Annual operating and maintenance expenses + Annual crew wages + Overhead cost = $113,832.42 + $286.20 + $64.38 + $64.38 = $114,247.38
- For the 30 m³ truck: Total annual cost = Purchase price + Annual operating and maintenance expenses + Annual crew wages + Overhead cost = $182,940.60 + $286.20 + $64.38 + $64.38 = $183,355.56
- Average annual cost for each stop:
- For the 10 m³ truck: Average annual cost for each stop = Total annual cost / Number of stops = $78,605.14 / 1,500 = $52.40
- For the 16 m³ truck: Average annual cost for each stop = Total annual cost / Number of stops = $114,247.38 / 1,500 = $76.16
- For the 30 m³ truck: Average annual cost for each stop = Total annual cost / Number of stops = $183,355.56 / 1,500 = $122.24
Based on the lowest average annual cost for each stop, the truck size that provides the best economic value is the 10 m³ truck, with an average annual cost of $52.40 per stop.
To know more about annual cost, refer here:
https://brainly.com/question/17256648
#SPJ4
if the bases of an isosceles trapezoid have lengths of 11 and 24 what is the length of the median a.13 units b.6.5 units c.35 units 17.5 units
A piston-cylinder contains 6.7 kg of Helium gas (R = 2.0769 kJ/kg.K) at P₁= 126.6 kPa and T₁=133.7 C. The gas is compressed in a polytropic process such that the n = 1.35 and the final temperature is T₂ = 359,2 C, what is the absolute boundary work (kl)? B. 1335.27 C 2324.36 D. 8965.38 E. 19819.26
W = (P₂V₂ - P₁V₁) / (1 - n)
Performing the calculations will give you the absolute boundary work in kJ.
To calculate the absolute boundary work (W) in a polytropic process, we can use the following formula:
W = (P₂V₂ - P₁V₁) / (1 - n)
Given:
Mass of helium gas (m) = 6.7 kg
Specific gas constant for helium (R) = 2.0769 kJ/kg.K
Initial pressure (P₁) = 126.6 kPa
Initial temperature (T₁) = 133.7 °C = 133.7 + 273.15 K
Polytropic exponent (n) = 1.35
Final temperature (T₂) = 359.2 °C = 359.2 + 273.15 K
First, we need to calculate the initial volume (V₁) using the ideal gas law:
PV = mRT
Substituting the values:
V₁ = (mRT₁) / P₁
Next, we need to calculate the final volume (V₂) using the polytropic process equation:
P₁V₁^n = P₂V₂^n
Substituting the values:
V₂ = (P₁V₁^n) / P₂^(1/n)
Now, we can calculate the absolute boundary work:
W = (P₂V₂ - P₁V₁) / (1 - n)
Substituting the values:
W = (P₂V₂ - P₁V₁) / (1 - n)
To know more about volume visit:
brainly.com/question/28058531
#SPJ11
If two varieties of mangoes having the price rs 30 per kg and Rs 40 per kg is mixed in the ratio of 3:2,what would be selling price per kg?
The selling price per kg of the mixed mangoes would be Rs 34.
To determine the selling price per kilogram (kg) when two varieties of mangoes are mixed in a specific ratio, we need to calculate the weighted average of their prices based on the given ratio.Let's assume the selling price per kg of the mixed mangoes is S.
Given that the two varieties are mixed in a ratio of 3:2, we can calculate the weighted average as follows:
(3 * Rs 30 + 2 * Rs 40) / (3 + 2) = (90 + 80) / 5 = Rs 170 / 5 = Rs 34
It's important to note that the selling price per kg is determined by the weighted average of the individual prices, taking into account the proportion or ratio in which they are mixed.
For more such questions on selling price
https://brainly.com/question/27993050
#SPJ8
Air enters a compressor at 100 kPa and 70°C at a rate of 3 kg/min. It leaves at 300 kPa and 150°C. Being as the compressor is not well insulated heat transfer takes place. The compressor consumes 6 kW of work. If the surroundings have a temperature of 20°C. Calculate:
a. The entropy change of air
b. The entropy change of the surroundings
c. The entropy generated
Use P = 5/2 R
The values of Δs = 0.919 kJ/kg K, ΔSsurr = 0.020 kJ/kg K and ΔSuniv = 0.939 kJ/kg K. It is a compressor, there is no heat transfer in the system, so q = 0.
P = 5/2 R
m = 3 kg/min
T1 = 70 + 273 = 343 K
T2 = 150 + 273 = 423 K
P1 = 100 kPa
P2 = 300 kPa
W = 6 kJ
Q = -W = -6 kJ
For a reversible process, we have for an ideal gas:
Δs = cp ln (T2/T1) - R ln (P2/P1)
Here, cp = 5/2 R
For air, R = 0.287 kJ/kg K
Part (a)
Δs = (5/2 × 0.287) ln (423/343) - 0.287 ln (300/100)
= 1.608 kJ/kg K - 0.689 kJ/kg K
= 0.919 kJ/kg K
Part (b)
ΔSsurr = -q/T
= -(-6)/293
= 0.020 kJ/kg K
Part (c)
ΔSuniv = Δs + ΔSsurr
= 0.919 + 0.020
= 0.939 kJ/kg K
Therefore, the values of Δs, ΔSsurr, and ΔSuniv are as follows:
Δs = 0.919 kJ/kg K
ΔSsurr = 0.020 kJ/kg K
ΔSuniv = 0.939 kJ/kg K
Learn more about heat transfer
https://brainly.com/question/13433948
#SPJ11
On June 10, 2022 a Total station (survey instrument) was set over point A with a backsight reading 0°00' on point B. A horizontal angle of 105°25'10 was turned clockwise to Polaris at the instant the star was at western elongation. The declination of Polaris was 88°14°26. The latitude of point A was 45°50'40"N. Find the true bearing of line AB. a) S 67°45' W b) S 73°29' W c) N 87°12' W d) N 75°45' W
Since the observation was taken when the star was at western elongation, the hour angle of Polaris is 6 h 19 m 34.9 s S 73°29'W.
Given: Latitude of point A,
φ = 45°50'40"N Horizontal angle turned from Point A to Point B,
H = 105°25'10"Declination of Polaris, δ = 88°14'26"S
(this is the time between the time Polaris crosses the meridian and the time we are making our observation).First, we will calculate the azimuth of the celestial body (Polaris) and then use it to find the true bearing of line AB.Step 1: Calculate the azimuth of the celestial body (Polaris)We will use the formula:
Azimuth = arctan [(sin H) / (cos H sin φ - tan δ cos φ)]
Substitute the given values, we get;
Azimuth = arctan [(sin 105°25'10") / (cos 105°25'10" sin 45°50'40" - tan 88°14'26" cos 45°50'40")]
Azimuth = arctan [(0.9404) / (0.5580 - (- 0.4382))]
Azimuth = arctan (1.3904 / 0.9962)
Azimuth = arctan (1.3933)
Azimuth = 54°46'51"
Calculate the true bearing of line ABThe true bearing of line AB =
Azimuth + 180°The true bearing of line AB = 54°46'51" + 180°
= 234°46'51"
To know more about angle visit:
https://brainly.com/question/30147425
#SPJ11
What is the slope of the line represented by the equation y = 4/5x-3
Answer:
To find the slope of a line from its equation, we need to use the slope-intercept form of the equation, y = mx + b, where m is the slope and b is the y-intercept. Since the equation y = 4/5x-3 is already in this form, the slope is m = 4/5.
Step-by-step explanation:
The answer is:
4/5Work/explanation:
The given equation is in y = mx + b form, where m is equal to the slope and b is equal to the y intercept.
So the slope is the number in front of x.
The y intercept is the constant.
Therefore, the slope is 4/54) A flow of 45 cfs is carried in a rectangular channel 5 ft wide at a depth of 1.1 ft. If the channel is made of smooth concrete (n=0.016), the slope necessary to sustain uniform flow at this depth i
The slope necessary to sustain uniform flow at this depth is most nearly: c) 0.0043.
To determine the slope necessary to sustain uniform flow in the given rectangular channel, we can use Manning's equation, which relates the flow rate, channel geometry, channel roughness, and slope of the channel.
Manning's equation is given as:
Q = (1.49/n) * A * R^(2/3) * S^(1/2)
Where:
Q = Flow rate (cubic feet per second)
n = Manning's roughness coefficient (dimensionless)
A = Cross-sectional area of the channel (square feet)
R = Hydraulic radius (A/P), where P is the wetted perimeter of the channel (feet)
S = Channel slope (feet per foot)
We are given the flow rate (Q) as 45 cfs, the channel width (B) as 5 ft, and the channel depth (D) as 1.1 ft.
First, let's calculate the cross-sectional area (A) of the channel:
A = B * D = 5 ft * 1.1 ft = 5.5 square feet
Next, we need to determine the hydraulic radius (R):
P = 2B + 2D = 2(5 ft) + 2(1.1 ft) = 12.2 ft
R = A / P = 5.5 sq ft / 12.2 ft = 0.45 ft
Now, we can rearrange Manning's equation to solve for the channel slope (S):
S = [(Q * n) / (1.49 * A * R^(2/3))]^2
Plugging in the given values:
S = [(45 cfs * 0.016) / (1.49 * 5.5 sq ft * (0.45 ft)^(2/3))]^2
S ≈ 0.0043 ft/ft
Therefore, the slope necessary to sustain uniform flow at a depth of 1.1 ft in this rectangular channel is approximately 0.0043, which corresponds to option c).
Learn more about depth
brainly.com/question/33467630
#SPJ11
A rectangular channel of width W=8 m carries a flows rate Q=2.6 m 3
/s. Considering a uniform flow depth d=4.6 m and a channel roughness ks=40 mm, calculate the slope S of the channel. You can assume that ks is sufficiently large so that the viscous sublayer thickness can be ignored in the estimation of C. Provide your answer to 8 decimals.
The slope S of the channel is 0.00142592.
The formula to calculate the slope of a rectangular channel is given by:
[tex]$$S = \frac{i}{n}$$[/tex]
Where S is the slope of the channel, i is the hydraulic gradient, and n is the Manning roughness coefficient of the channel.
The hydraulic gradient is calculated by the following formula:
[tex]$$i = \frac{h_L}{L}$$[/tex]
Where hL is the head loss due to friction, and L is the length of the channel. The hydraulic radius is given by:
[tex]$$R = \frac{A}{P}$$[/tex]
Where P is the wetted perimeter of the channel.
Substituting the given values, we get:
[tex]$$A = Wd = 8 \times 4.6 = 36.8 \text{ m}^2\\$$P = 2W + 2d = 2(8) + 2(4.6) = 25.2 \text{ m}$$R = \frac{A}{P} = \frac{36.8}{25.2} = 1.46032 \text{ m}[/tex]
The Manning roughness coefficient is not given, but we can assume a value of 0.025 for a concrete channel with mild silt deposits. The hydraulic gradient is:
[tex]$$i = \frac{h_L}{L} = \frac{0.035648}{L}$$[/tex]
We can assume a value of 1000 m for the length of the channel. Substituting this value, we get:
[tex]$$i = \frac{0.035648}{1000} = 0.000035648$$[/tex]
Finally, substituting the values of i and n in the formula for S, we get:
[tex]$$S = \frac{i}{n} = \frac{0.000035648}{0.025} = 0.00142592$$[/tex]
Rounding off to 8 decimal places, we get: S = 0.00142592.
To know more about the slope, visit:
https://brainly.com/question/33072619
#SPJ11
14-
thermodynamics عرصات
A Carnot heat engine is working between two thermal reservoirs of 628.2 C and 211.1 C, what is the Carnot thermal efficiency (96)? OA 86.16 OB. 66.40 C 0.46 D. 46.28 E. 0.66
Carnot thermal efficiency is given by ηcarnot = (T1 - T2)/ T1Where, ηcarnot = Carnot thermal efficiencyT1 = Temperature of the source in KelvinT2 = Temperature of the sink in Kelvin.
Given that, The temperatures of the source and the sink are given asT1 = 628.2 C = 901.35 KT2 = 211.1 C = 484.25 K.
Now, Substituting the given values in the above formula,
ηcarnot = (T1 - T2)/ T1= (901.35 - 484.25) / 901.35= 46.27%.
Therefore, the Carnot thermal efficiency is 46.27%.
We are given the temperatures of the source and the sink, to calculate the Carnot thermal efficiency. The Carnot thermal efficiency is the maximum possible efficiency of a heat engine. It is based on the concept of reversible engines, where the engine can perform work without any loss of energy. The Carnot cycle is a hypothetical cycle that serves as the upper limit of a heat engine's efficiency.
It consists of four stages, two adiabatic processes, and two isothermal processes. The Carnot cycle is a reversible cycle that can be executed in both directions.
The Carnot cycle efficiency is given by ηcarnot = (T1 - T2)/ T1. Here, T1 and T2 are the temperatures of the source and the sink in Kelvin, respectively.
Using this formula, we can calculate the Carnot thermal efficiency.
Substituting the given values, we get ηcarnot = (901.35 - 484.25) / 901.35 = 46.27%.
The Carnot thermal efficiency of a heat engine working between two thermal reservoirs of 628.2 C and 211.1 C is 46.27%.
To know more about Carnot cycle :
brainly.com/question/31586892
#SPJ11
Factor: 16x2 + 40x + 25.
Step-by-step explanation:
(4x + 5)(4x + 5) or (4x + 5)^2
The graph below shows the solution set of which inequality?
-6-5 -4 -3 -2 -1 0 1 2 3 4 5 6
The correct option is A, the inequality is x ≥ 0
Which solution set is represented on the graph?Here we can see that we have a closed circle at x = 0 (which means that x = 0 is also a solution of the inequality), and an arrow that goes to the right (so the other solutions are larger than zero).
Then this is the set of all values equal to or larger than zero, so the inequality is written as follows:
x ≥ 0
Then the correct option is A, x ≥ 0
Learn more about inequalities at:
https://brainly.com/question/24372553
#SPJ1
Find the coordinates of the midpoint of MN with endpoints M(-2,6) and N(8,0).
(3,2)
(1,0)
(8,0)
(3,3)
Answer:
(3, 3)
Step-by-step explanation:
Use the midpoint formula (x1+x2/2, y1+y2/2)
so its (-2+8/2, 6+0/2)
which is (3,3)
A carbon coating 20 um thick is to burned off a 2-mm-dimater sphere by air at atmospheric pressure and 1000 K. calculate the time to do this, assuming that the reaction product is CO2, and the mass transfer of oxygen from air to the carbon surface is the rate-controlling step. The mass transfer coefficient is 0.25 m/s. density of carbon: 2250 kg/m3. Air: 21% oxygen.
The time required for burning off a 2 mm diameter sphere by air at atmospheric pressure and 1000 K is approximately 29.02 seconds
The mass transfer of oxygen from air to the carbon surface is the rate-controlling step. So, the time required for burning off a 2 mm diameter sphere by air at atmospheric pressure and 1000 K can be calculated by using the given data.
Density of carbon = 2250 kg/m3
Thickness of carbon coating = 20 µm = 20 × 10-6 m
Radius of sphere = 2 mm/2 = 1 mm = 0.001 m
Given mass transfer coefficient, k = 0.25 m/s
Fraction of oxygen in air, Φ = 21/100 = 0.21
Assuming that the reaction product is CO2, we know that the reaction of carbon with oxygen can be written as:
C (s) + O2 (g) → CO2 (g)
We can write the equation for the combustion reaction as:
1 C (s) + 1 O2 (g) → 1 CO2 (g)
The mass transfer rate of oxygen from air to the carbon surface can be calculated by the formula:
f = k (Ca - C) = (k ρ/NA) (P - P*)
Where,
Ca = Concentration of oxygen in air = Φ P/RTC
C = Concentration of oxygen in the boundary layer
P = Partial pressure of oxygen
P* = Equilibrium pressure of oxygen
ρ = Density of the carbon material
NA = Avogadro’s number
R = Universal gas constant
T = Temperature of the system
At 1000 K, R = 8.314 J/mol-K and NA = 6.023 × 10^23/mol
So, the mass transfer rate of oxygen from air to the carbon surface is:
f = k (Ca - C) = (k ρ/NA) (P - P*)
= (0.25 × 2250/6.023 × 10^23) (0.21 × 1.013 × 10^5 - P*)
For the reaction of carbon with oxygen, we know that:
nC = m/M = (4/12) π r^3 ρ / M
m = nM
Where,
n = Number of moles
M = Molar mass of CO2 = 12 + 2 × 16 = 44 g/mol
r = Radius of the sphere
ρ = Density of carbon material = 2250 kg/m^3
So, m = (4/12) π (0.001)^3 × 2250 = 2.36 × 10^-6 kg
And, the number of moles of carbon present is:
nC = m/M = 2.36 × 10^-6 / 44 = 5.36 × 10^-8 mol
The amount of oxygen required to burn the carbon can be calculated as:
nO2 = nC = 5.36 × 10^-8 mol
The amount of oxygen present in air required for the combustion reaction will be:
nO2 = Φ nAir
So, the number of moles of air required for the combustion reaction will be:
nAir = nO2/Φ = 5.36 × 10^-8 / 0.21 = 2.55 × 10^-7 mol
The volume of air required for the combustion reaction will be:
VAir = nAir RT/P = 2.55 × 10^-7 × 8.314 × 1000 / 1.013 × 10^5
= 2.06 × 10^-11 m^3
The time required for burning off a 2 mm diameter sphere by air can be calculated by the formula:
t = VAir / f
= 2.06 × 10^-11 / (0.25 × 2250/6.023 × 10^23) (0.21 × 1.013 × 10^5 - P*)
= 3.69 × 10^3 P* seconds
The value of P* depends on the temperature at which the reaction occurs. For the given problem, P* can be calculated using the formula:
ln (P*/0.21) = -38000 / RT
So, P* = 0.21 e^(-38000 / (8.314 × 1000))
= 7.77 × 10^-8 atm
= 7.87 × 10^-3 Pa
Therefore, the time required for burning off a 2 mm diameter sphere by air at atmospheric pressure and 1000 K is:
t = 3.69 × 10^3 × 7.87 × 10^-3
= 29.02 seconds (approx)
Learn more about oxygen:
https://brainly.com/question/33311650
#SPJ11
(a) The following statement is either True or False. If the statement is true, provide a proof. If false, construct a specific counterexample to show that the statement is not always true. Let H and K be subspaces of a vector space V, then H∪K is a subspace of V. (b) Let V and W be vector spaces. Let T:V→W be a one-to-one linear transformation, so that an equation T(u)=T(v) alwnys implies u=v. ( 7 points) ) Show that if the set (T(vi),...,T(v.)) is linearly dependent, then the set (V, V.) is linearly dependent as well. Hint: Use part (1).)
a. The statement is false
bi. The kernel of T contains only the zero vector.
bii. If the set (T(vi),...,T(v.)) is linearly dependent, it is true that the set (V, V.) is linearly dependent as well
How to construct a counterexampleTo construct a counterexample
Let V be a vector space over the real numbers, and let H and K be the subspaces of V defined by
H = {(x, 0) : x ∈ R}
K = {(0, y) : y ∈ R}
H consists of all vectors in V whose second coordinate is zero, and K consists of all vectors in V whose first coordinate is zero.
This means that H and K are subspaces of V, since they are closed under addition and scalar multiplication.
However, H ∪ K is not a subspace of V, since it is not closed under addition.
For example, (1, 0) ∈ H and (0, 1) ∈ K, but their sum (1, 1) ∉ H ∪ K.
To show that the kernel of T contains only the zero vector
Suppose that there exists a nonzero vector v in the kernel of T, i.e., T(v) = 0. Since T is a linear transformation, we have
T(0) = T(v - v) = T(v) - T(v) = 0 - 0 = 0
This implies that 0 = T(0) = T(v - v) = T(v) - T(v) = 0 - 0 = 0, which contradicts the assumption that T is one-to-one.
Therefore, the kernel of T contains only the zero vector.
Suppose that the set {T(v1),...,T(vn)} is linearly dependent, i.e., there exist scalars c1,...,cn, not all zero, such that:
[tex]c_1 T(v_1) + ... + c_n T(v_n) = 0[/tex]
Since T is a linear transformation
[tex]T(c_1 v_1 + ... + c_n v_n) = 0[/tex]
Using part (i), since the kernel of T contains only the zero vector, so we must have
[tex]c_1 v_1 + ... + c_n v_n = 0[/tex]
Since the ci are not all zero, this implies that the set {v1,...,vn} is linearly dependent as well.
Learn more on vector space on https://brainly.com/question/22717427
#SPJ4
Question is incomplete, find the complete question below
a) The following statement is either True or False. If the statement is true, provide a proof. If false, construct
a specific counterexample to show that the statement is not always true. (3 points)
Let H and K be subspaces of a vector space V , then H ∪K is a subspace of V .
(b) Let V and W be vector spaces. Let T : V →W be a one-to-one linear transformation, so that an equation
T(u) = T(v) always implies u = v. (7 points)
(i) Show that the kernel of T contains only the zero vector.
(ii) Show that if the set {T(v1),...,T(vn)} is linearly dependent, then the set {v1,...,vn} is linearly
dependent as well.
Hint: Use part (i).
A silver metal electrode is added to a silver nitrate solution, which is connected via a potassium nitrate salt bridge to a solution of copper nitrate solution with a copper electrode to produce a galvanic cell. Which metal is reduced and what is the standard cell potential? Ag+(aq)+1e−→Ag(s);E∘=0.80 VCu2+(aq)+2e−→Cu(s);E∘=0.34 V K+(aq)+e−→K(s);E∘=−2.92 V a. Silver, 0.46 V b. Copper, 0.46 V c. Copper, 1.14 V d. Silver, 1.14 V e. Silver, −0.46 V
The metal that is reduced in the given galvanic cell is silver and the standard cell potential is 0.46 V.
A silver metal electrode is added to a silver nitrate solution to form Ag+(aq). The ion will react with the electrons released from the silver metal electrode to form Ag(s) according to the following half-reaction:
Ag⁺(aq) + 1e− → Ag(s)
The standard reduction potential of this half-reaction is +0.80 V, indicating that it has a strong tendency to be reduced. Similarly, copper ion will react with electrons released from the copper electrode to form Cu(s) according to the following half-reaction:
Cu²⁺(aq) + 2e− → Cu(s)
The standard reduction potential of this half-reaction is +0.34 V. We can see that the Ag⁺ ion has a greater tendency to be reduced than the Cu²⁺ ion. Hence, silver is reduced in the given galvanic cell. The standard cell potential is calculated by subtracting the reduction potential of the oxidized half-reaction from that of the reduced half-reaction. Therefore, the standard cell potential is given as follows:
0.80 V - 0.34 V = 0.46 V.
Therefore, the correct answer is option (a) silver, 0.46 V.
Learn more about galvanic cell here:
https://brainly.com/question/33558906
#SPJ11
VB at B. For the cantilever steel beam [E = 230 GPa; / = 129 × 106 mm4], use the double-integration method to determine the deflection Assume L = 3.7 m, Mo = 61 kN-m, and w = = 13 kN/m. W Mo Answer:
The deflection of the cantilever steel beam is approximately (x²) / 102,564,102,564,102.56.
To determine the deflection of the cantilever steel beam using the double-integration method, we can follow these steps:
First, let's calculate the reaction force at the fixed end of the beam. We can use the equation for the sum of moments about the fixed end:
ΣM = 0
(-Mo) + (VB x L) = 0
VB x L = Mo
VB = Mo / L
VB = 61 kN-m / 3.7 m
VB ≈ 16.49 kN
Next, let's find the equation for the deflection of the beam. The equation for the deflection of a cantilever beam under a uniformly distributed load (w) is given by:
δ = (w x x²) / (6 x E x I)
where δ is the deflection, w is the load per unit length, x is the distance from the fixed end, E is the modulus of elasticity, and I is the moment of inertia.
Now, we need to calculate the moment of inertia (I) of the beam. The moment of inertia for a rectangular cross-section can be calculated using the formula:
I = (b x h³) / 12
where b is the width of the beam and h is the height of the beam.
Given that the beam is rectangular and the dimensions are not provided in the question, we cannot determine the exact moment of inertia without additional information.
However, if we assume a typical rectangular cross-section with a width of 100 mm and a height of 200 mm, we can calculate the moment of inertia as follows:
I = (100 mm x (200 mm)³) / 12
I ≈ 133,333,333.33 mm⁴
Now we can substitute the values into the deflection equation and solve for the deflection (δ). Using the given values:
δ = (13 kN/m x x²) / (6 x 230 GPa x 133,333,333.33 mm⁴)
Simplifying the units:
δ = (13 x 10^3 N/m x x²) / (6 x 230 x 10⁹ N/mm² x 133,333,333.33 mm⁴)
δ = (13 x 10³ x x²) / (6 x 230 x 10⁹ x 133,333,333.33)
δ ≈ (x²) / 102,564,102,564,102.56
To learn more about cantilever steel beam:
https://brainly.com/question/16791806
#SPJ11
For the following reaction, 0.478 moles of hydrogen gas are mixed with 0.315 moles of ethylene (C₂H4). hydrogen (g) + ethylene (C₂H₁) (9)→ ethane (C₂H6) (9) What is the formula for the limiting reactant? What is the maximum amount of ethane (C₂H6) that can be produced?
The formula for the limiting reactant is hydrogen gas (H2), and the maximum amount of ethane (C2H6) that can be produced is 0.315 moles.
To determine the limiting reactant and the maximum amount of product that can be formed, we need to compare the moles of each reactant and their stoichiometric ratios in the balanced chemical equation.
The balanced equation for the reaction is:
hydrogen (H2) + ethylene (C2H4) -> ethane (C2H6)
From the given information, we have 0.478 moles of hydrogen gas (H2) and 0.315 moles of ethylene (C2H4).
To find the limiting reactant, we compare the moles of each reactant with their respective stoichiometric coefficients. The stoichiometric coefficient of hydrogen gas is 1, and the stoichiometric coefficient of ethylene is also 1. Since the moles of hydrogen gas (0.478) are greater than the moles of ethylene (0.315), hydrogen gas is in excess and ethylene is the limiting reactant.
The limiting reactant determines the maximum amount of product that can be formed. Since the stoichiometric coefficient of ethane is also 1, the maximum amount of ethane that can be produced is equal to the moles of the limiting reactant, which is 0.315 moles.
Therefore, the formula for the limiting reactant is hydrogen gas (H2), and the maximum amount of ethane (C2H6) that can be produced is 0.315 moles.
Learn more about Ethane
brainly.com/question/30214217
#SPJ11
Find the derivative of the function. h(x)=7^x^2+2^2x h′(x)=
The derivative of the function h(x) = 7^(x^2) + 2^(2x) is h'(x) = (ln 7) * (7^(x^2)) * (2x) + (ln 2) * (2^(2x)) * (2).
To find the derivative of the function h(x) = 7^(x^2) + 2^(2x), we can apply the rules of differentiation.
Let's break it down step by step:
Step 1: Start with the function h(x) = 7^(x^2) + 2^(2x).
Step 2: Recall the exponential function rule that states d/dx(a^x) = (ln a) * (a^x), where ln represents the natural logarithm.
Step 3: Differentiate each term separately using the exponential function rule.
For the first term, 7^(x^2), we have:
d/dx(7^(x^2)) = (ln 7) * (7^(x^2)) * (2x)
For the second term, 2^(2x), we have:
d/dx(2^(2x)) = (ln 2) * (2^(2x)) * (2)
Step 4: Combine the derivatives of each term to find the derivative of the entire function.
h'(x) = (ln 7) * (7^(x^2)) * (2x) + (ln 2) * (2^(2x)) * (2)
This is the derivative of the function h(x) = 7^(x^2) + 2^(2x). It represents the rate of change of the function with respect to x at any given point.
It's important to note that this derivative can be simplified further depending on the specific values of x or if there are any simplification opportunities within the terms.
However, without additional information, the expression provided is the derivative of the function as per the given function form.
In summary, the derivative of the function h(x) = 7^(x^2) + 2^(2x) is h'(x) = (ln 7) * (7^(x^2)) * (2x) + (ln 2) * (2^(2x)) * (2).
Learn more about derivative from the given link
https://brainly.com/question/28376218
#SPJ11
must use laplace
Use Laplace transforms to determine the solution for the following equation: 6'y(r) dr y'+12y +36 y(r) dr=10, y(0) = -5 For the toolbar, press ALT+F10 (PC) or ALT+FN+F10 (Mac).
The solution to the given equation using Laplace transforms is y(r) = 15e^(-48r).
To solve the given equation using Laplace transforms, we'll apply the Laplace transform to both sides of the equation. Let's denote the Laplace transform of y(r) as Y(s). The Laplace transform of the derivative of y(r) with respect to r, y'(r), can be written as sY(s) - y(0).
Applying the Laplace transform to the equation, we have:
sY(s) - y(0) + 12Y(s) + 36Y(s) = 10
Now, we can substitute y(0) with its given value of -5:
sY(s) + 12Y(s) + 36Y(s) = 10 - (-5)
sY(s) + 12Y(s) + 36Y(s) = 15
Combining like terms, we get:
(s + 48)Y(s) = 15
Now, we can solve for Y(s) by isolating it:
Y(s) = 15 / (s + 48)
To find the inverse Laplace transform and obtain the solution y(r), we can use a table of Laplace transforms or a computer algebra system. The inverse Laplace transform of Y(s) = 15 / (s + 48) is y(r) = 15e^(-48r).
Therefore, the solution to the given equation is y(r) = 15e^(-48r).
To learn more about "Laplace transforms" refer here:
https://brainly.com/question/29583725
#SPJ11
Two parallel irrigation canals 1000 m apart bounded by a horizontal impervious layer at their beds. Canal A has a water level 6 m higher than canal B. The water level at canal B is 18 m above the canal bed. The formation between the two canals has a permeability of 12 m/day and porosity n=0.2 1- If a non-soluable pollutant is spilled in canal A, the time in years to reach canal B:
The question is about calculating the time required for a non-soluble pollutant that has been spilled into Canal A to reach Canal B. Two parallel irrigation canals, Canal A and Canal B, are separated by 1000 meters and bounded by an impervious layer on their beds.
Canal A has a water level that is 6 meters higher than Canal B. Canal B's water level is 18 meters above the canal bed.
The permeability of the formation between the two canals is 12 m/day, and the porosity is 0.2. To determine the time required for a non-soluble pollutant that has been spilled in Canal A to reach Canal B,
we must first determine the hydraulic conductivity (K) and the hydraulic gradient (I) between the two canals. Hydraulic conductivity can be calculated using Darcy's law, which is as follows: q
=KI An equation for hydraulic gradient is given as:
I=(h1-h2)/L
Where h1 is the water level of Canal A, h2 is the water level of Canal B, and L is the distance between the two canals. So, substituting the given values, we get:
I =(h1-h2)/L
= (6-18)/1000
= -0.012
And substituting the given values in the equation for K, we get: q=KI
Therefore, the velocity of water through the formation is 0.144 m/day,
which means that the time it takes for a non-soluble pollutant to travel from
Canal A to Canal B is:
T=L/v
= 1000/0.144
= 6944 days= 19 years (approx.)
To know more about parallel visit :
https://brainly.com/question/28987004
#SPJ11
A medical device company knows that the percentage of patients experiencing injection-site reactions with the current needle is 11%. What is the standard deviation of X, the number of patients seen until an injection-site reaction occurs? a. 3.1289 b. 8.5763 c. 9.0909 d. 11
The answer is (b) 8.5763 is the standard deviation of X, the number of patients seen until an injection-site reaction occurs.
The number of patients seen until an injection-site reaction occurs follows a geometric distribution with probability of success 0.11.
The formula for the standard deviation of a geometric distribution is:
σ = sqrt(1-p) / p^2
where p is the probability of success.
In this case, p = 0.11, so:
σ = sqrt(1-0.11) / 0.11^2
= sqrt(0.89) / 0.0121
= 8.5763 (rounded to four decimal places)
Therefore, the answer is (b) 8.5763.
Learn more about number from
https://brainly.com/question/27894163
#SPJ11
Solve the linear homogenous ODE:
(x^2)y''+3xy'+y=0
There is no solution of the given ODE of the form y = x^n.
Hence, we cannot use the method of undetermined coefficients to solve the given ODE.
The solution of the linear homogeneous ODE:
(x^2)y''+3xy'+y=0 is as follows:
Given ODE is (x^2)y''+3xy'+y=0
We need to find the solution of the given ODE.
So,Let's assume the solution of the given ODE is of the form y=x^n
Now,
Differentiating y w.r.t x, we get
dy/dx = nx^(n-1)
Again, Differentiating y w.r.t x, we get
d^2y/dx^2 = n(n-1)x^(n-2)
Now, we substitute the value of y, dy/dx and d^2y/dx^2 in the given ODE.
(x^2)n(n-1)x^(n-2)+3x(nx^(n-1))+x^n=0
We simplify the equation by dividing x^n from both the sides of the equation.
(x^2)n(n-1)/x^n + 3nx^n/x^n + 1 = 0
x^2n(n-1) + 3nx + x^n = 0
x^n(x^2n-1) + 3nx = 0
(x^2n-1)/x^n = -3n
On taking the limit as n tends to infinity, we get,
x^2 = 0 which is not possible.
So, there is no solution of the given ODE of the form y = x^n.
Hence, we cannot use the method of undetermined coefficients to solve the given ODE.
To know more about undetermined coefficients visit:
https://brainly.com/question/32563432
#SPJ11