On Saturday nights, Greg, likes to go to the Frisco Disco, where he can dance under the strobe light. The strobe contains a 200, u capacitor that stores charge over a 1000 V potential difference. If the strobe flashes 4 times each second, what is the current flow created by the strobe's capacitor?

According to the solving  the statement is correct. The work done on the car as it speeds up to 5.0 m/s is 22,500 J.

The work performed by a force is the sum of the movement and the component of something like the applied pressure of the object in the displacement direction. Work is accomplished when we push a block with a certain amount of force, "F," which causes the body to move with a certain amount of acceleration. Work completed is represented by the formula W = F.

KEf = (1/2)mv²

= (1/2)(1800 kg)(5.0 m/s)²

= 22,500 J

The work done on the car is equal to the change in kinetic energy:

W = KEf - KEi

= 22,500 J - 0 J

= 22,500 J

Therefore, the statement is correct. The work done on the car as it speeds up to 5.0 m/s is 22,500 J.

To know more about work done visit:

https://brainly.com/question/13662169

#SPJ1

I understand the the question you are looking for is:

If a 1800 kg car starts at rest and speeds up to 5. 0 m/s then the work done is?

If you know the total current and  voltage across the circuit, then you can find the total resistance using the Ohm's Law, that is : R = V / I.

In a series-parallel circuit, one can find the total resistance of circuit by calculating resistance of each parallel section and then adding reciprocals of these values to obtain total resistance of parallel section. Next, you can add series resistances to this total resistance to obtain single resistance for entire circuit.

In series the total resistance is equal to the sum of the resistors. In parallel,  inverse of the total resistance is equal to the the sum of the inverse of each individual resistor.

To know more about series parallel circuit, refer

https://brainly.com/question/26589211

#SPJ9

Note: The question given on the portal is incomplete. Here is the complete question.

Question: How is resistance calculated in a series-parallel circuit?

There is a requirement for 1,638,000 Joules of heat.

Q=I2Rt provides the Joule's heating formula. Joule's heating formula states that the amount of heat produced is proportional to the length of time that the electrical resistance and current are both constant.

The following equation must be used:

Q = m × Lfus + m × Cp × ΔT

Ethyl alcohol has a heat of fusion of 105 J/g and a specific heat capacity of 2.44 J/g°C.

The amount of ethyl alcohol is specified as 7.2 kg, or 7,200 g.

The ethyl alcohol must be melted at a temperature of:

Q1 = m × Lfus =

7,200 g × 105 J/g

= 756,000 J

In order to raise the temperature of the liquid ethyl alcohol from 0°C to 50°C, we must determine the amount of heat needed:

ΔT = 50°C - 0°C

= 50°C

The amount of heat required to raise the temperature of the liquid ethyl alcohol is:

Q2 = m × Cp × ΔT

= 7,200 g × 2.44 J/g°C × 50°C

= 882,000 J

As a result, the total amount of heat needed to transform 7.2 kg of solid ethyl alcohol from -211°C to 50.0°C into a liquid is:

Q = Q1 + Q2 = 756,000 J + 882,000 J

= 1,638,000 J

To know more about heat visit:-

https://brainly.com/question/30603212

#SPJ1

The energy crisis is generally caused by increasing the population or excessive utilization of non-renewable sources of energy.

Most of the time, energy crises typically have been provoked by localized shortages, wars, and market manipulation. Some have stated that government characteristics and actions like tax hikes, nationalization of energy companies, etc. are responsible for such circumstances. Definitely, these facts are true.

Apart from this, the regulation of the energy sector shifts the supply and demand of energy away from its economic equilibrium and may also be responsible for hiking the price of petroleum products from time to time. If the government may raise the price of any product, it will not be affordable for common consumers due to a lack of earnings and financial strength. This ultimately leads to an energy crisis.

To learn more about the Energy crisis, refer to the link:

https://brainly.com/question/1261870

#SPJ9

"Particles always move in straight lines" is not true. Particles can move in curved paths due to the influence of external forces, such as gravity or electric or magnetic fields.

Gravity is a natural phenomenon by which all objects with mass are brought toward one another. It is most commonly recognized as the force that gives weight to physical objects, and causes them to fall to the ground when dropped. Gravity is one of the fundamental forces of the universe and is a type of acceleration that affects all objects in the same way regardless of size, composition, and other factors. This force is responsible for keeping planets and other objects in their orbits around larger masses. It is also the driving force behind the formation of galaxies, stars, and other celestial bodies.

To learn more about gravity

https://brainly.com/question/557206

#SPJ1

The potential energy of an object is the product of its mass, acceleration due to gravity and height of the object from the surface. Here, the potential energy of the object is 3118.2 J.

Potential energy of an object is the energy generated by virtue of its position. It is the energy stored on the object when it is at rest. When the object starts moving its potential energy starts to convert to kinetic energy.

the potential energy of an object is related to its mass, acceleration due to gravity g and height from the surface h as:

P = mgh.

then, m = 26.21 Kg

h = 12.14 m

g = 9.8 m/s²

p = 26.21 Kg × 9.8 m/s² × 12.14 m = 3118.2 J.

Therefore, the potential energy of the object is 3118.2 J.

Find more on potential energy:

https://brainly.com/question/24284560

#SPJ1

The voltage across one of the lamps will be 220V. This is because when components are connected in parallel, the voltage across each component is the same as the voltage across the source.

Voltage is a measure of the potential difference in electrical energy between two points. It is measured in volts and is the electrical force that causes current to flow in an electrical circuit. Voltage is the energy per unit charge that causes a current to flow through a conductor. It can be compared to the pressure of water in a pipe, where the greater the pressure, the more water that can be pushed through the pipe. Voltage is the primary factor in determining the amount of electrical current that can be produced in an electrical circuit. Voltage is also related to the amount of power that can be produced in an electrical circuit. Voltage can be generated by a variety of sources, such as batteries, generators, and rectifiers.

To learn more about voltage

https://brainly.com/question/27861305

#SPJ1

Answer:

Mass and kinetic energy have a positive relationship, which means that as mass increases, kinetic energy increases, if all other factors are held constant.

In this state, Kinetic energy is equal to half of the product mass and velocity. SI unit is joules. So it's if the mass is doubled then the kinetic energy also gets doubled.

The Young's modulus for polythene is 0.3-0.5 GPa (3000-5000 N/m2).

The Young's modulus (E) is a property of the material that tells us how easily it can stretch and deform and is defined as the ratio of tensile stress (σ) to tensile strain (ε). Where stress is the amount of force applied per unit area (σ = F/A) and strain is extension per unit length (ε = dl/l).Young's modulus E, the Young modulus, or the modulus of elasticity in tension or compression, is a mechanical property that measures the tensile or compressive stiffness of a solid material when the force is applied lengthwise.The higher the modulus, the more stress is needed to create the same amount of strain; an idealized rigid body would have an infinite Young's modulus. Conversely, a very soft material (such as a fluid) would deform without force, and would have zero Young's modulus.

For such more questions on Young's modulus:

brainly.com/question/30730491

#SPJ11

Both processes involve a change in the state of matter. In thermionic emissions, electrons are emitted from a solid metal surface to form a gas or plasma, while in liquid vaporization, a liquid is converted into a gas or vapor.

Liquid vaporisation, also known as evaporation, is the process by which a liquid transforms into its gaseous state at a temperature below its boiling point. This occurs due to the random motion of molecules in a liquid, where some of the molecules near the surface gain enough kinetic energy to overcome the intermolecular forces holding them together and escape into the air as a gas.

During the process of liquid vaporization, the liquid absorbs energy from its surroundings in the form of heat, which increases the average kinetic energy of the molecules and causes them to evaporate. The rate of evaporation depends on several factors such as temperature, humidity, and surface area of the liquid.

To learn more about liquid vaporisation visit here:

brainly.com/question/24096079

#SPJ4

The Earth has four main interconnected systems: the atmosphere, the hydrosphere, the lithosphere, and the biosphere.

The model shows how all four systems interact with each other and influence each other. The atmosphere is responsible for controlling the climate and transferring energy through air currents and radiation. The hydrosphere includes all water on Earth, both frozen and liquid, and it is responsible for transporting water and energy. The lithosphere is made up of rocks, soil, and minerals, and it helps regulate and moderate the Earth's temperature. Finally, the biosphere is made up of all living things, and it influences and is influenced by all of the other systems.

For such more questions on interconnected systems:

brainly.com/question/1968463

#SPJ11

The frequency of a wave is the speed of the wave divided by its wavelength. The frequency of the wave travelling through at 2.6 m/s with the wavelength of 1.3 meters is 2 Hz.

Frequency of a wave is the number of wave cycles travelling per unit time. It is the inverse of the time period thus has the unit of s⁻¹ which is equivalent to the unit Hz.

The frequency of a wave is inversely proportional to the wavelength of the wave. The speed of the wave is related to its frequency and wavelength as:

c = νλ

given, c = 2.6 m/s

wavelength, λ = 1.3 m.

then, frequency ν = c/λ

ν  = 2.6 m/s / 1.3 m

   = 2 Hz.

Therefore, the frequency of the wave is 2 Hz.

Find more on frequency:

https://brainly.com/question/3795295

#SPJ1

The kind of food that she may have to consume is garlic bread.

Garlic bread is a type of bread that is usually made with bread, butter, and garlic.

Garlic bread is generally high in calories, fat, and sodium, and it may also contain added sugars or artificial flavors. Additionally, the type of bread used to make garlic bread is usually white bread, which is refined and low in fiber.

It can help you to have a whole lot of carbohydrates.

Learn more about carbohydrates:https://brainly.com/question/29775112

#SPJ1

The car's momentum change is 4000 kg/m/s because momentum change equals impulse.

Impulse can be summed up as follows: In this case, the car experienced an impulse of 4000 kg/s. Impulse = force x time.

The following formula can be used to determine the car's change in momentum using this information: The car's momentum change is 4000 kg/m/s because momentum change equals impulse.

The change in an object's momentum caused by a force acting on it for a certain amount of time is equal to impulse. An object's momentum change is measured by its impulse, which is defined as the sum of the object's acting force and time. Calculating impulse can be done by: Force x time is the impulse.

Learn more about momentum:

brainly.com/question/402617

#SPJ1

A puck moves at 2.35 m/s in a -22° angle.It is pushed for 0.215 seconds by a hockey stick, changing its velocity to 6.42 m/s in a 50.0° direction. The negative sign indicates that the puck has fallen below its initial height.

How to solve the given problem with the help of trigonometry?

To solve the problem, we need to use the equations of motion and trigonometry.

First, let's find the initial velocity components:

[tex]\mathrm V_{i,x} = v_i cos(\theta_i) = 2.35 cos(-22^\circ) \approx 2.216\text{ m/s}[/tex]

[tex]\mathrm V_{i,y} = v_i sin(\theta_i) = 2.35 sin(-22^\circ) \approx -0.891\text{ m/s}[/tex]

where [tex]v_i[/tex] is the initial velocity and [tex]\theta_i[/tex] is the initial angle in degrees.

Next, we need to find the final velocity components:

[tex]\mathrm V_{f,x} = v_f cos(\theta_f) = 6.42 cos(50^\circ) \approx 4.121\text{ m/s}[/tex]

[tex]\mathrm V_{f,y} = v_f sin(\theta_f) = 6.42 sin(50^\circ) \approx 4.936\text{ m/s}[/tex]

where [tex]v_f[/tex] is the final velocity and [tex]\theta_f[/tex] is the final angle in degrees.

The change in velocity components are:

[tex]\Mathrm\Delta V_x = V_{f,x} - V_{i,x} \approx 1.905\text{ m/s}[/tex]

[tex]$\Delta V_y = V_{f,y} - V_{i,y} \approx 5.827\text{ m/s}[/tex]

The time of the push is t = 0.215 s.

Using the equation of motion, we can find the change in position in the y-direction:

[tex]$\Delta y = V_{i,y} t + \frac{1}{2} a_y t^2[/tex]

where a_y is the acceleration in the y-direction.

Since the puck is in flight, the only force acting on it is gravity, which causes an acceleration of [tex]-9.8 m/s^2[/tex] in the y-direction.

Plugging in the values, we get:

[tex]\Delta y = (-0.891\text{ m/s})(0.215\text{ s}) + \frac{1}{2} (-9.8\text{ m/s}^2)(0.215\text{ s})^2 \approx -0.139\text{ m}[/tex]

Note that the negative sign indicates that the puck has fallen below its initial height.

Therefore, the change in position in the y-direction is approximately 0.139 m.

To learn more about velocity, visit:

https://brainly.com/question/80295

#SPJ1

Answer:

0.434

Explanation:

Answer:

Originally Sonu and image is 8 m (4 m to mirror and 4 m to image)

If he moves 1 m towards the mirror the image distance will be reduced to  (c) 6 m

The correctly written chemical equation that demonstrates the conservation of mass is:

[tex]H_{2} + O_{2} - > H_{2}O[/tex]

The law of conservation of mass is a fundamental principle in chemistry and physics that states that mass cannot be created or destroyed in a chemical reaction or a physical process. In other words, the total mass of the reactants must be equal to the total mass of the products in any chemical reaction. This means that the number of atoms of each element present in the reactants must be equal to the number of atoms of the same elements in the products.

[tex]H_{2} + O_{2} - > H_{2}O[/tex]

This equation shows the reaction between hydrogen gas and oxygen gas to produce water vapor. The equation is balanced, which means that the number of atoms of each element on both sides of the equation is equal, and therefore, the law of conservation of mass is upheld.

The law of conservation of mass is important in chemistry because it allows chemists to predict the outcome of a reaction and to calculate the amount of reactants needed to produce a certain amount of product. It also ensures that the total amount of matter in the universe remains constant, which is a fundamental concept in modern physics.

Learn more about conservation of mass, here:

https://brainly.com/question/13383562

#SPJ1

Answer:

1.076 m/s

Explanation:

Given a 3.0 kg fish is swimming at 1.5 m/s to the right. it swallows a 0.25 kg fish swimming to the left at 4.0 m/s. what is the speed and direction of the larger fish immediately after lunch?  

Mass of fish m1 = 3 kg

Velocity v1 = 1.5 m/s

Mass of small fish m2 = 0.25 kg

Velocity v2 = - 4 m/s (negative sign since the direction is opposite)

Therefore total mass of fish after swallowing will be M = 3 + 0.25 = 3.25 kg

Let the final velocity of fish be V

Now according to the law of conservation of momentum we have

     So m1v1 + m2v2 = M x V

           3 x 1.5 + 0.25 x – 4 = 3.25 x V

               4.5 – 1 = 3.25 V

                   3.25 V = 3.5

                     Or V = 1.076 m/s

So speed of the fish will be 1.076 m/s

Answer:

The sentence can be completed as:

The two elements in this model may or may not bond into one ratio, depending on their electronegativities and the specific conditions of the reaction.

The voltage across each resistors connected in parallel circuit is the same. Hence, according to Ohm's law, the current through the resistor of 5 ohms is 1.5 A.

Ohm's law states that, the voltage across a circuit is the product of the resistance through and current flowing through the circuit.

V = I R.

The voltage over resistors connected in series circuit will be different whereas , that for a parallel circuit, voltage is constant.

Given v = 12 V

then, the current through the series circuit is the same for all the components in the circuit.

hence, the total resistance in the branch with 3 ohm and 5 ohms is:

R = R1 + R2  = 5. + 3 = 8 Ω

Now, the current passing through the branch will be 12 V/ 8 Ω  = 1.5 A.

Therefore, the current passing through the 5 ohm resistor is 1.5 A.

Find more on Ohm's law:

https://brainly.com/question/1247379

#SPJ1

After the trigger is pulled, the momentum of the system is:

p = mv

where p is the momentum, m is the mass, and v is the velocity.

Before the bullet is fired:

p = 0

After the bullet is fired:

p = (0.008 kg)(v) + (4 kg)(-u)

where u is the recoil velocity of the gun.

Since there are no external forces acting on the system, the initial momentum is equal to the final momentum:

0 = (0.008 kg)(v) + (4 kg)(-u)

Solving for u, we get:

u = -(0.008 kg)(v)/(4 kg) = -0.002 v

Substituting this into the equation for the momentum, we get:

p = (0.008 kg)(v) + (4 kg)(0.002 v) = 0.016 v

The force applied to the bullet is given by:

F = ma

where F is the force, m is the mass, and a is the acceleration.

Rearranging this equation to solve for acceleration, we get:

a = F/m = (2.8 kN)/(0.008 kg) = 350,000 m/s^2

Using the kinematic equation:

v = u + at

where u is the initial velocity (which is zero), t is the time, and a is the acceleration, we can solve for the final velocity:

v = at = (350,000 m/s^2)(1.7 × 10^-3 s) = 595 m/s

Therefore, the velocity of the bullet as it leaves the barrel of the gun is 595 m/s.

b) The recoil velocity of the gun is given by:

u = -(0.008 kg)(v)/(4 kg) = -0.002 v = -1.19 m/s

c) In an elastic collision, kinetic energy is conserved, while in an inelastic collision, kinetic energy is not conserved.

The initial kinetic energy of the system is zero, since both the bullet and the gun are stationary. After the collision, the kinetic energy of the system is:

K = (1/2)mv^2 + (1/2)Mu^2

where K is the kinetic energy, m is the mass of the bullet, v is its velocity, M is the mass of the gun, and u is its recoil velocity.

Substituting the values we found earlier, we get:

K = (1/2)(0.008 kg)(595 m/s)^2 + (1/2)(4 kg)(1.19 m/s)^2 = 1340 J

The work done on the bullet is:

W = Fs = (2.8 kN)(2 × 10^-3 m) = 5.6 J

Since the work done on the bullet is less than the change in kinetic energy of the system, the collision is inelastic.

More on momentum can be found here: https://brainly.com/question/30677308?

#SPJ1

Explanation:

The angle of the plane is directly correlated to the shape of the elliptical shape cut out. When the plane is at a low angle, the resulting elliptical shape cut out is also much shorter in length. Conversely, when the plane is at a steep angle, the resulting elliptical shape cut out is much longer in length.

This is because the angle of the plane determines the amount of material that will be removed when the plane is used to cut the elliptical shape. When the plane is at a low angle, less material is removed, thus producing a shorter elliptical shape. When the plane is at a steep angle, more material is removed, thus producing a longer elliptical shape.

In addition, the angle of the plane also affects the depth of the elliptical shape cut out. When the plane is at a low angle, the resulting elliptical shape is shallow. Conversely, when the plane is at a steep angle, the resulting elliptical shape is deep.

The equivalent resistance between points A and B in the diagram is 22 Ω

We shall begin by obtaining the equivalent resistance in parallel (i,e the three 6 Ω resistor). Details below:

1/Rₜ = 1/R₁ + 1/R₂ + 1/R₃

1/Rₜ = 1/6 + 1/6 + 1/6

1/Rₜ = 3/6

1/Rₜ = 1/2

Rₜ = 2 Ω

Finally, we shall determine the equivalent resistance between A and B (i.e series arrangement). Details below:

R = R₁ + R₂ + R₃ + R₄ + R₅ + R₆ + R₇ + R₈ + R₉ + R₁₀ + R₁₁

R = 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2

R = 22Ω

Thus, we can conclude that the equivalent resistance is 22 Ω

Learn more about resistance:

https://brainly.com/question/13691672

#SPJ1

If an 80% efficiency machine lifts a load of 40n by applying a 10N effort then the velocity ratio (VR) will be 5.

The efficiency of a machine can be calculated by the ratio of mechanical advantage(MA) and the velocity ratio(VR).

Mathematically,

Efficiency= η= [tex]\frac{MA}{VR}[/tex]

where MA= mechanical advantage = load(W)/ Effort(P)

VR=velocity ratio=[tex]\frac{distance moved by effort }{distance moved by load}[/tex]

Here in the given question

Load(w)=40N

Effort(P)= 10N

MA=40/10=4

Efficiency(η)=80% =0.8

we Know η=MA/VR

VR=MA/η

VR=4/0.8=5

VR=5

Hence the velocity ratio of the machine is 5.

To learn more about Machines' Efficiency  click:

https://brainly.com/question/11752408

#SPJ9

Transverse wave: direction of propagation is perpendicular to direction of wave

The diagram and information in the section "Stages of Photosynthesis" provide a coherent understanding of the light and dark reactions of photosynthesis.

The light-dependent reactions occur in the thylakoid membranes of the chloroplasts and are driven by light energy. The light energy is absorbed by pigments such as chlorophyll and converted into chemical energy in the form of ATP and NADPH. The light-dependent reactions also produce oxygen gas as a byproduct.

The ATP and NADPH produced in the light-dependent reactions are then used in the light-independent reactions, which occur in the stroma of the chloroplasts. The light-independent reactions, also known as the Calvin cycle, use carbon dioxide and the energy from ATP and NADPH to synthesize glucose and other organic compounds. The Calvin cycle does not directly require light, but it is dependent on the products of the light-dependent reactions.

Together, the light-dependent and light-independent reactions of photosynthesis form a coherent cycle that allows plants and other photosynthetic organisms to convert light energy into chemical energy in the form of glucose and other organic compounds. The diagram and information in the section "Stages of Photosynthesis" provide a clear visual and textual representation of this process, helping to develop a coherent understanding of the overall process of photosynthesis.

Learn more about light and dark reactions, here:

https://brainly.com/question/12995206

#SPJ1

If the same force is applied to an object with a small mass, it will experience a greater acceleration due to less inertia and the ease with which it can be accelerated. In contrast, an object with a larger mass will require more force to achieve the same acceleration.

According to Newton's Second Law of Motion, the acceleration of an object is directly proportional to the force applied to it and inversely proportional to its mass. Mathematically, we can express this relationship as:

acceleration = force / mass

Therefore, if the same force is applied to an object with a small mass, it will experience a greater acceleration compared to an object with a larger mass. This is because the smaller mass results in less inertia, meaning it requires less force to cause a given acceleration. In other words, a smaller mass will accelerate more easily when the same force is applied to it. For example, if you apply the same force to a baseball and a bowling ball, the baseball will accelerate much more quickly because it has a smaller mass than the bowling ball. Conversely, if you apply the same force to a truck and a car, the car will accelerate more quickly because it has a smaller mass than the truck.

To know more about acceleration please refer: https://brainly.com/question/12550364

#SPJ4

Ionizing smoke detectors contain an isotope that undergoes alpha decay (such as americium-241) because alpha particles are more ionizing than beta or gamma particles.

What is Isotopes?

Isotopes are variants of an element that have the same number of protons in their atomic nuclei but differ in the number of neutrons. This means that isotopes of the same element have the same atomic number (which determines the element's chemical properties) but different atomic masses.

In an ionizing smoke detector, the alpha particles emitted by the radioactive source ionize the air in the detector's chamber, creating a current that is detected by a circuit. When smoke particles enter the chamber, they attach to the ions and reduce the current, triggering the detector's alarm.

Alpha particles are heavier and have a higher charge than beta or gamma particles, which means they interact more strongly with matter and create more ionization as they travel through air. This makes them more effective at ionizing the air in the detector's chamber, and therefore more sensitive to the presence of smoke particles.

Learn more about Isotopes from given link

https://brainly.com/question/14220416

#SPJ1

An objects potential energy is due to its state of rest.

Define potential energy

Potential energy is a form of accumulated energy that is dependent on the relationship between different system components. When a spring is compressed or expanded, its potential energy increases. The potential energy of a steel ball is greater when it is raised above the earth than when it is brought to Earth.

Energy that is conserved or kept in a substance or object is known as potential energy. The position, arrangement, or condition of the item or substance determines the amount of stored energy. It can be pictured as energy with the "potential" to perform labor. Mechanical energy, electrical energy, chemical energy, radiant energy, nuclear energy, and heat energy are the six categories of potential energy.

To learn more about potential energy use:

https://brainly.com/question/14427111

#SPJ1

Answer:

The work done by the helicopter is equal to the force applied multiplied by the distance moved in the direction of the force. In this case, the force is equal to the weight of the two people, which is given as 150 kg, and the distance moved in the direction of the force is 20 meters.

Therefore, the work done by the helicopter is:

Work = Force x Distance = 150 kg x 9.8 m/s^2 x 20 m = 29,400 J

This work is turned into potential energy, which is stored in the two people lifted by the helicopter. As the helicopter pulls the people upward, their potential energy increases due to their increased height above the ground. If the helicopter were to release the people, their potential energy would be converted into kinetic energy as they fell back down to the ground.

Explanation: