The company will incur a loss of $30,000 on the sale of the machine.
The gain or loss on the transaction, we need to calculate the net book value of the machine. The net book value is the initial cost minus the accumulated depreciation. In this case, the net book value would be $215,000 - $185,000 = $30,000. Since the company is selling the machine for $30,000, which is equal to its net book value, there is no gain or loss on the transaction. Therefore, the correct answer is c. No gain or loss.
When a company sells an asset, the gain or loss is calculated by comparing the selling price with the net book value of the asset. If the selling price is higher than the net book value, it results in a gain, and if the selling price is lower, it leads to a loss. In this case, the selling price of $30,000 is equal to the net book value of $30,000, indicating that there is no gain or loss. The company is essentially recovering the remaining book value of the machine through the sale. Thus, the answer is c. No gain or loss.
Learn more about depreciation : brainly.com/question/33528280
#SPJ11
Outer Armour (OA) is a company that sells high quality outerwear. OA has accepted two notes receivables from customers and has a December 31, 2020 year-end.
Note Receivable A On September 1, 2020, OA accepted a $580,000, 6 months note receivable with an interest rate of 6%. Interest and the principal balance are due at maturity.
Note Receivable B On October 31, 2020, OA accepted a $340,000 note receivable with an interest rate of 4.5%. Interest is paid the first day of each following month and the principal is due at maturity on June 30, 2021.
Required:
1. Not available in connect.
2. How many months need to be accrued for Notes Receivable A and B as of December 31, 2020?
3. Prepare the adjusting journal entries to accrue the interest for Note Receivable A and Note Receivable B as at December 31, 2020. (Round your final answers to the nearest whole dollars.)
The adjusting journal entry for Note Receivable A would be Interest Receivable $11,600 and Interest Revenue $11,600. The adjusting journal entry for Note Receivable B would be Interest Receivable $3,400 and Interest Revenue $3,400.
To determine the number of months that need to be accrued for Notes Receivable A and B as of December 31, 2020, we can calculate the time period from the note acceptance date to December 31, 2020.
For Note Receivable A:
The note was accepted on September 1, 2020, and December 31, 2020, is exactly four months later. Therefore, we need to accrue interest for 4 months.
For Note Receivable B:
The note was accepted on October 31, 2020, and December 31, 2020, is exactly two months later. Therefore, we need to accrue interest for 2 months.
To prepare the adjusting journal entries to accrue the interest for Note Receivable A and Note Receivable B as of December 31, 2020, we need to calculate the interest amounts and record them.
For Note Receivable A:
Principal: $580,000
Interest rate: 6%
Time period: 4 months
Interest = Principal x Interest Rate x Time
= $580,000 x 6% x (4/12)
= $11,600
The adjusting journal entry for Note Receivable A would be:
Interest Receivable $11,600
Interest Revenue $11,600
For Note Receivable B:
Principal: $340,000
Interest rate: 4.5%
Time period: 2 months
Interest = Principal x Interest Rate x Time
= $340,000 x 4.5% x (2/12)
= $3,400
The adjusting journal entry for Note Receivable B would be:
Interest Receivable $3,400
Interest Revenue $3,400
These adjusting entries recognize the interest revenue earned but not yet received or recorded as of December 31, 2020, ensuring accurate financial reporting.
To learn more about journal entries
https://brainly.com/question/28390337
#SPJ11
everal people get sick from food poisoning at Chipotle, causing other customers to stop eating there.{ __Decrease_P__Decrease_Q 4. Thanks to a huge media push, more and more people want to use kale in their recipes. At the same time, new greenhouse technology makes it easier for farmers to grow more kale more quickly. increase P _Increase Part III. Problem Solving - Supply and Demand (20pts) For each question, read the information provided. Then, draw how the supply and/or demand curve would move, and what would happen to price and quantity as a result.
1. Decrease in demand for Chipotle's food: Leftward shift in the demand curve, decrease in quantity demanded, and decrease in price.
2. Increase in demand for kale: Rightward shift in the demand curve, increase in quantity demanded, and increase in price.
3. Increase in the supply of kale: Rightward shift in the supply curve, increase in quantity supplied, and decrease in price.
Based on the given information, I will analyze the effect of certain events on the supply and demand curves, as well as the resulting changes in price and quantity.
1. Several people get sick from food poisoning at Chipotle, causing other customers to stop eating there. This event would lead to a decrease in demand for Chipotle's food. As a result, the demand curve would shift to the left, indicating a decrease in quantity demanded. The price would also decrease because of the reduced demand.
2. Thanks to a huge media push, more and more people want to use kale in their recipes. This event would lead to an increase in demand for kale. Consequently, the demand curve would shift to the right, indicating an increase in quantity demanded. The price of kale would also increase due to the higher demand.
3. New greenhouse technology makes it easier for farmers to grow more kale more quickly. This event would result in an increase in the supply of kale. The supply curve would shift to the right, indicating an increase in quantity supplied. As a result, the price of kale would decrease due to the higher supply.
To summarize:
1. Decrease in demand for Chipotle's food: Leftward shift in the demand curve, decrease in quantity demanded, and decrease in price.
2. Increase in demand for kale: Rightward shift in the demand curve, increase in quantity demanded, and increase in price.
3. Increase in the supply of kale: Rightward shift in the supply curve, increase in quantity supplied, and decrease in price.
Learn more about Supply and Demand https://brainly.com/question/1222851
#SPJ11
The accountant must make adjusting journal entries for all items
in the book section of the bank reconciliation.
True
False
The given statement "The accountant must make adjusting journal entries for all items in the book section of the bank reconciliation" is False. The accountant must not make adjusting journal entries for all items in the book section of the bank reconciliation.
What is the book section of the bank reconciliation?
The book section of the bank reconciliation lists the transactions that are recorded in the company's books but are not yet recorded by the bank. Such transactions are checked and matched with the bank statement. This helps in identifying the transactions that are omitted or not yet recorded by the bank.
The book section of the bank reconciliation consists of the following items:
Outstanding deposits Outstanding checks Bank errors Service charges Interest earned Adjusting entries that appear on the bank statement do not require any action from the accountant, as they are already recorded by the bank. However, if any adjusting entry appears on the book section of the bank reconciliation, then the accountant needs to make appropriate adjusting entries in the company's books.
Adjusting entries are made for the following items:
Outstanding deposits and checks that are not cleared by the bank Bank errors Service charges and interest earned on the bank balance that is not recorded in the company's books.
To know more about accountant visit :
https://brainly.com/question/30977839
#SPJ11
Distinguish between legal and ethical compliance. Explain how an organisation attempts to manage ethical behaviour across borders. Kindly give a comprehensive explanation
Legal compliance is the act of abiding by legislation, guidelines, or directives laid down by regulatory authorities and governments.
Organizations that operate outside the law risk severe consequences, such as heavy fines or even imprisonment, for failing to adhere to legislation. Ethical compliance, on the other hand, refers to adherence to ethical and moral values that guide individuals' behaviour.
These ethical principles can not be legislated, and as such, ethical compliance can not be enforced through legal measures.The following are some ways in which organizations try to manage ethical behaviour across borders
:1. The development of a code of ethics for the company2. Conducting training programs for staff, which will include ethical guidelines3. Ensuring that the code of ethics and ethical principles are communicated to all stakeholders, including business associates and suppliers4. Creating a framework for managing ethical problems, like setting up a hotline for reporting unethical behaviour and appointing an ethical officer5. Working with international organizations and partners to establish industry-specific codes of conduct
To know more about ethical compliance here
https://brainly.com/question/19953644
#SPJ11
Select the accounting principle, concept, or assumption that most closely matches each statement. An auditor will try to determine whether a transaction had occurred and its dollar amount by examining documents such as invoices and by other Choose... means. While businesses operate continuously, their economic activities are divided into distinct time periods for reporting purposes. Choose... Information is included in financial statements if it likely would make a difference in a user business decision. Choose... Choose.... Financial information is presented in such a way so that informed users can comprehend its meaning and implications.
In accounting, there are various principles, concepts, and assumptions that are followed while creating financial statements. The principles provide guidance on how transactions should be recorded, while the concepts help in understanding the accounting process.
The assumptions assist in the preparation of financial statements. The given statements are explained below with the accounting principle, concept, or assumption that most closely matches them:
An auditor will try to determine whether a transaction had occurred and its dollar amount by examining documents such as invoices and by other means. This statement closely matches the accounting principle of verification. Verification is an auditing principle that ensures that the recorded transactions are genuine. An auditor verifies transactions by inspecting the accounting records, including financial statements, bank statements, and documents such as invoices and receipts.While businesses operate continuously, their economic activities are divided into distinct time periods for reporting purposes.Financial information is presented in such a way so that informed users can comprehend its meaning and implications. This statement closely matches the accounting principle of understandability. Understandability means that financial information should be presented in a clear and concise manner so that it can be easily understood by users who have reasonable knowledge of business and economic activities.Know more about the accounting principle,
https://brainly.com/question/1033546
#SPJ11
please show the full work i dont want the answer in excel.
. A bond has a par value of $1,000, a time to maturity of 8 years, and a coupon rate of 9% with interest paid annually. If the current market price is $875, what will be the approximate price of this bond at the end of the first year?
The approximate price of the bond at the end of the first year will be $930.21.
How to find?If the current market price is $875, what will be the approximate price of this bond at the end of the first year?We know the formula to calculate the price of a bond:
P=C[1-(1+r)-n/r]+FV(1+r)-n
Here, P = price of the bond
C = coupon payment
FV = face value (par value of the bond)
r = interest rate per period
n = total number of periods.
The first step is to calculate the coupon payment.
Coupon payment = (Coupon rate * Par value)/ Number of payments per year.
Given the annual coupon payment, Coupon payment = (9%*1000)/1
= $90.
The second step is to calculate the interest rate per period. Interest rate per period = Annual interest rate/ Number of periods in a year Interest rate per period = 9%/1
= 9%.
The third step is to calculate the total number of periods. Number of periods = Number of years * Number of payments per year Number of periods = 8*1
= 8.
Now, we can calculate the approximate price of the bond after the end of the first year. Let's plug in the values:
P=C[1-(1+r)-n/r]+FV(1+r)-n
P = $90[1-(1+9%)^-1/8]/9% + $1,000(1+9%)^-1P
= $930.21.
So, the approximate price of the bond at the end of the first year will be $930.21.
To know more on Bond visit:
https://brainly.com/question/31994049
#SPJ11
Applying Functions to Basic Economics: Problem 19 (1 point) The revenue for selling x units of a product is R=40x. The cost of producing x units is C=20x+10500. In order to obtain a profit, the revenue must be greater than the cost, so we want to know, for what values of x will this product return a profit. To obtain a profit, the number of units must be greater than You have attempted this problem 2 times. Your overall recorded score is 0\%. You have unlimited attempts remaining.
C = 20x + 10500 is the cost of manufacturing x units. We want to know what values of x this product will return a profit for since in order to make a profit, the revenue needs to be higher than the cost.
Given, R=40x is the revenue generated by selling x units of a product. C=20x+10500 is the price of manufacturing x units. We want to know what values of x this product will return a profit for since in order to make a profit, the revenue needs to be higher than the cost.
Let's begin by calculating the profit function: Profit = Revenue – Cost$ P(x) = R(x) - C(x)$ $P(x) = 40x - (20x + 10500)$ $P(x) = 20x - 10500$
Now, let us find the break-even point. In the break-even point, the profit equals zero.
Thus, we have to solve for $P(x) = 0$ $20x - 10500 = 0$ $20x = 10500$ $x = 525$Therefore, if we sell 525 units, we will break even.
To Know more about manufacturing
https://brainly.com/question/32717570
#SPJ11
The Fresh Connection sells cases of PET bottles to the sports camps at a price of $15.94 and the materials cost an average of $4.26 per case. They produce 6,041 cases of the PET bottles per week. However, because camp enrollments vary, the number of cases needed per week varies, leaving them with extra product. Since this is a specialty product, they cannot store any of the extra product produced each week. Now, however, you have offered to pay them $2.63 per unsold case each week (salvage value) because you plan to sell them to other camps in the area. They sell 4,071 cases for one particular week, discarding the difference. How much better off would The Fresh Connection be for the week if they accepted your offer for the unsold cases rather than simply discarding them? Do not round anything until you get to the end of the problem and then round to two (2) decimal places.
The Fresh Connection produces 6,041 cases of PET bottles per week and sells it to sports camps at a price of $15.94. The average material cost per case is $4.26. But the number of cases needed per week varies, leaving them with extra product.
The total cost of producing 6,041 cases of PET bottles per week is given by:
Total cost = Number of cases produced per week x (Price - Material cost per case)Total cost = 6,041 x ($15.94 - $4.26)
Total cost = $70,199.74
Thus, the cost per case of producing PET bottles is $11.63.
The revenue generated from selling 4,071 cases is given by:
Revenue = Number of cases sold x Price per case
Revenue = 4,071 x $15.94
Revenue = $65,013.74
The cost incurred in producing 4,071 cases is:
Cost = Number of cases produced x Cost per case
Cost = 4,071 x $11.63Cost = $47,343.33
Therefore, the profit earned from selling 4,071 cases is:
Profit = Revenue - Cost
Profit = $65,013.74 - $47,343.33
Profit = $17,670.41T
he number of unsold cases is:x = 6,041 - 4,071x = 1,970
Therefore, the value of unsold cases is:
Value = Number of unsold cases x Salvage value per case
Value = 1,970 x $2.63
Value = $5,180.10
Thus, the net profit of accepting your offer would be:
Net Profit = Profit from sold cases + Salvage value of unsold cases
Net Profit = $17,670.41 + $5,180.10
Net Profit = $22,850.51
Thus, The Fresh Connection would be $4,790.03 better off for the week if they accepted your offer for the unsold cases rather than simply discarding them.
To know more about varies visit :
https://brainly.com/question/28584402
#SPJ11
Consider the following spot rate curve: -6-month spot rate: 3% -12-month spot rate: 5%. - 18-month spot rate: 7%. - 24-month spot rate: 10%. What is the forward rate for a 12-month zero coupon bond issued one year from today? Equivalently, the question asks for f 2
2
, where 1 time period consists of 6 months. Assume semiannual compounding. Round your answer to 4 decimal places. For example if your answer is 3.205%, then please write down 0.0321.
The forward rate for a 12-month zero coupon bond issued one year from today is 9.69%.
A forward rate agreement (FRA) is a contract that allows two parties to agree on the interest rate that will be paid on a notional balance, which will be determined at a future date. In order to calculate the forward rate for a 12-month zero-coupon bond issued one year from today, we must first calculate the 6-month, 12-month, and 18-month zero rates.
The 6-month zero rate is determined by the 6-month spot rate:
Zero6 = 1 / (1 + 0.03 / 2) ^ (2 / 2) = 0.98512
The 12-month zero rate is determined by the 6-month and 12-month spot rates:
Zero12 = [(1 + 0.05 / 2) ^ (2 / 2) / (1 + 0.03 / 2) ^ (1 / 2)] - 1 = 0.05137
The 18-month zero rate is determined by the 6-month, 12-month, and 18-month spot rates:
Zero18 = [(1 + 0.07 / 2) ^ (3 / 2) / (1 + 0.05 / 2) ^ (1 / 2)] - 1 = 0.07472
The forward rate for a 12-month zero coupon bond issued one year from today, or f22, is determined by the 12-month and 18-month zero rates:
f22 = [(1 + Zero18 * 1.5) ^ (2 / 1) / (1 + Zero12 * 1) ^ (1.5 / 1)] - 1
= [(1 + 0.07472 * 1.5) ^ (2 / 1) / (1 + 0.05137 * 1) ^ (1.5 / 1)] - 1
≈ 0.0969 ≈ 9.69%
Rounding to four decimal places, we get the answer to be 0.0969, or 9.69%.
To learn more about forward rate agreement, here:
https://brainly.com/question/32722149
#SPJ11
Given the frequency of different-sized earthquakes, do you think we can relieve pressure on faults by intentionally making lots of small earthquakes? What you want to think about here is the scaling factor - how are energy and frequency related?
The release of pressure on faults by making a lot of small earthquakes is a theory, and it is yet to be fully researched. While it may sound like a good idea, there are many unknowns regarding the behavior of different faults.
For example, if a smaller fault breaks, it may lead to a much larger earthquake that could be dangerous. Energy and frequency are directly proportional. The larger the earthquake, the more energy it releases. Since energy is directly proportional to the frequency of earthquakes, it indicates that smaller earthquakes are more frequent than larger ones.
Furthermore, a few small earthquakes may release the same amount of energy as a single larger earthquake. Thus, it is unclear whether or not inducing smaller earthquakes would relieve pressure on the fault and prevent a more severe earthquake from occurring.
To know more about earthquakes refer here : brainly.com/question/29500066
#SPJ11
Marginal productivity of labor. Find the marginal productivity of labor (MPN) for the following production functions: 1. Y = zF(K,N) = zKαN1−α (Cobb-Douglas technology) 2. Y = zF(K,N) = lnz + αln K + (1 − α)ln N (Log Cobb-Douglas preferences) 3. Y = zF(K,N) = zK + N (linear technology) 4. Y = zF(N) = zN (linear technology without capital) 5. Y = zF(K,N) = z αKφ + (1 − α)Nφ 1 φ (Constant Elasticity of Substitution production function) where φ ≤ 1, and 0 < α < 1 are technological parameters, N denotes labor demand, K is the capital stock, and z the total factor productivity.
The marginal productivity of labor (MPN) can be found by taking the derivative of the production function with respect to labor (N).
Let's calculate the MPN for each production function:
1. For the Cobb-Douglas technology (Y = zKαN1−α), we need to find the derivative of Y with respect to N. Taking the derivative, we get MPN = (1 - α)zKαN−α.
2. For the Log Cobb-Douglas preferences (Y = lnz + αln K + (1 − α)ln N), the derivative of Y with respect to N is MPN = (1 - α)/N.
3. For the linear technology (Y = zK + N), the derivative of Y with respect to N is MPN = 1.
4. For the linear technology without capital (Y = zN), the derivative of Y with respect to N is MPN = z.
5. For the Constant Elasticity of the Substitution production function (Y = z αKφ + (1 − α)Nφ 1 φ), the derivative of Y with respect to N is MPN = (1 - α)Nφ1/φ.
To find the marginal productivity of labor, we calculate the derivative of the production function with respect to labor (N). The resulting derivative represents the change in output (Y) when labor (N) changes by a small amount. By using the given formulas, we can find the MPN for each production function.
Learn more about marginal productivity of labor: https://brainly.com/question/14867207
#SPJ11
Which of the following statements shows effective critical thinking? "I shouldn't believe everything that I think." "My instructor said this was true, and I always trust him/her." "When most of my Discord group members agree, I believe them." (none of the above)
Critical thinking involves the objective and logical analysis of information to make informed decisions and form accurate judgments. It requires individuals to evaluate data, ideas, and beliefs by considering evidence, context, and criteria.
By employing critical thinking, individuals can differentiate facts from opinions, identify biases and fallacies, and arrive at well-founded conclusions. The main objective of critical thinking is to enhance intellectual abilities and minimize errors or misconceptions.
Among the given options, the statement that exemplifies effective critical thinking is "I shouldn't believe everything that I think." This statement emphasizes the importance of being sceptical about one's own thoughts and assumptions. It encourages individuals to subject their beliefs to scrutiny and verification before accepting them as true. This approach acknowledges that our mental processes can be influenced by biases, emotions, or limited information, potentially leading to flawed perceptions and beliefs.
Therefore, critical thinking requires individuals to question their own assumptions, consider alternative perspectives, seek relevant information, and assess the credibility and relevance of sources.
Know more about Critical thinking:
brainly.com/question/30998960
#SPJ11
Sweatshops are terrible places to work, but for some people a job in a sweathsop represents the difference between eating and starving; for others it represents the first step on a rung to a better standard of living for them and for their families. If we go back to the Industrial Revolution, we can see it's how we all started out. Do you believe sweatshops have a place in the 21st century? If so, what modifications would you make to them? If not, what would you provide as a feasible alternative?
Sweatshops are terrible places to work, but for some people a job in a sweathshop represents the difference between eating and starving; for others, it represents the first step on a rung to a better standard of living for them and for their families.
What does it entail?If we go back to the Industrial Revolution, we can see it's how we all started out. However, I do not believe sweatshops have a place in the 21st century.
There are several reasons why sweatshops should not be allowed to operate. First, the labor conditions in sweatshops are inhumane. Workers are subjected to long hours of work, minimal pay, and poor working conditions. They are often forced to work in cramped spaces with inadequate ventilation and lighting. They do not have access to clean water, restroom facilities, or basic safety equipment. These conditions lead to physical and emotional exhaustion, illnesses, and accidents. Second, sweatshops perpetuate a cycle of poverty. Workers are paid very low wages and are unable to afford basic necessities such as food, clothing, and shelter. They are forced to live in overcrowded and unsanitary conditions. This makes it difficult for them to escape poverty and improve their standard of living. Third, sweatshops are unethical. Many sweatshops use child labor, which is a violation of human rights.Workers are often subjected to verbal and physical abuse by their employers. They are not allowed to form labor unions or to engage in collective bargaining. Instead, they are forced to accept the conditions set by their employers.
What would I provide as a feasible alternative? The feasible alternative is for companies to adopt fair labor standards that ensure workers are treated with dignity and respect. These standards should include adequate pay, safe working conditions, and access to basic benefits such as health care and retirement benefits. Additionally, companies should engage with labor unions and other worker advocacy groups to ensure that workers are able to negotiate fair wages and benefits.Furthermore, consumers should demand that companies adopt fair labor standards. They should boycott products that are produced in sweatshops and only support companies that demonstrate a commitment to fair labor standards.
To know more on consumers visit:
https://brainly.com/question/27773546
#SPJ11
Received $15,500 cash for consulting services rendered in January. b. Issued common stock to investors for $14,500 cash. c. Purchased $16,200 of equipment, paying 25 percent in cash and owing the rest on a note due in 2 y d. Received $8,150 cash for consulting services to be performed in February. e. Bought and received $1,620 of supplies on account. f. Received utility bill for January for $1,450, due February 15. g. Consulted for customers in January for fees totaling $16,700, due in February. h. Received $20,200 cash for consulting services rendered in December. i. Paid $810 toward supplies purchased in (e). Required: Prepare the journal entry for each of the above transactions. (If no entry is required for a transaction/e Required" in the first account field.) Journal entry worksheet Received $15,500 cash for consulting services rendered in January. Record the transaction. Note: Enter debits before credits.
The following are the journal entries for each of the given transactions. Journal entries are the first step in the accounting cycle and serve as the initial recording of financial transactions in a company's books.
They are used to record the debits and credits for each transaction, following the double-entry bookkeeping system.
a. Cash - $15,500 Consulting revenue - $15,500
b. Cash - $14,500 Common stock - $14,500
c. Equipment - $16,200 Cash - $4,050 Notes payable - $12,150
d. Cash - $8,150 Unearned consulting revenue - $8,150
e. Supplies - $1,620 Accounts payable - $1,620
f. Utilities expense - $1,450 Accounts payable - $1,450
g. Accounts receivable - $16,700
Consulting revenue - $16,700h. Cash - $20,200 Consulting revenue - $20,200i. Accounts payable - $810 Cash - $810
To learn more about journal entries, visit here
https://brainly.com/question/20421012
#SPJ11
capital sperding for 2018 was $1.370,000, and that the firm reduced its net working captat imedtment by 569,000 . What was the firm's 2018 operating cash flok of OCF? (Enter your antwer in dollars, not millions of dotiars, e.g., 1,234,567.)
Operating cash flow (OCF) is calculated by taking the net income and adding back non-cash expenses and deductions from income. the answer is not possible to calculate.
A firm's OCF for the year can be calculated as follows:
OCF = Net income + Depreciation (non-cash expense)
The company's 2018 operating cash flow (OCF) can be calculated using the formula given above, using the information provided in the question. Here's how:
Net capital spending = $1,370,000 - $569,000 = $801,000
OCF = Net income + Depreciation
Depreciation can be determined by subtracting the net capital spending from the depreciation for the year. Depreciation = $1,293,000 - $801,000 = $492,000
However, the question does not provide the net income, which is needed to calculate the OCF. Without the net income information, it is not possible to calculate the OCF with the given information.
Therefore, the answer is not possible to calculate.
Learn more about Operating cash flow
https://brainly.com/question/21322525
#SPJ11
Complete question:
Please outline the most likely state of the Canary current large marine ecosystem products and services in 2050 if things continue as they are.
The Canary Current Large Marine Ecosystem is an area with a high level of biological productivity. Its main characteristic is the high degree of endemism of its fauna and flora.
Due to the decrease in resources and the increase in exploitation, its state has been deteriorating over the years, so in 2050, if things continue as they are, it is expected that this ecosystem will face even more critical situations. In the face of climate change, it is predicted that the Canary Current Large Marine Ecosystem will have a drastic decrease in the production of primary and secondary fishery products.
The primary fishery products that are at risk are sardines and anchovies, which are essential for the fish canning industry, and are also the basis of the trophic pyramid. The reduction of these species' biomass will cause a significant impact on the entire marine ecosystem and the economic and social sectors that depend on it.In addition to the production of primary and secondary products, the tourism sector in the Canary Islands is also likely to be affected. The beauty of the natural landscapes, beaches, and underwater life is the primary attraction for tourists. Hence, the decrease in marine biodiversity may lead to the decline of this economic sector.
The ecosystem services provided by the Canary Current Large Marine Ecosystem, such as the control of the atmospheric gases and the regulation of the nutrient cycle, will also be negatively affected by the changes. These services are essential for maintaining the balance of the global climate and the functioning of the marine ecosystem. Hence, their decline will lead to negative effects in the global context.
To know more about Ecosystem visit:
https://brainly.com/question/31459119
#SPJ11
could you help me to identify how the company is engaging stakeholders in every strategy level, please?
In today's world, the way companies engage with their stakeholders plays an important role in their success. Stakeholders can have a significant impact on the growth of an organization, and as a result, most companies have begun to recognize this and are incorporating stakeholder engagement into their strategy.
The company needs to listen to the needs of its stakeholders. By doing so, they will be able to understand their needs and make changes accordingly. Listening can be done through surveys, focus groups, and other forms of research. It is important to make sure that all stakeholders are heard, not just a select .Transparency is essential when engaging stakeholders.
Stakeholders should be encouraged to participate in the decision-making process. When stakeholders are involved in the decision-making process, they are more likely to support the decisions made by the company.
In conclusion, companies can engage their stakeholders in various ways, including communication, listening, transparency, and participation.
To know more about strategy visit:
https://brainly.com/question/31930552
#SPJ11
Suppose a domestically produced motor bicycle sells at a world price of $10,000 under unrestricted trade. The domestic producer uses $6000 worth of imported inputs. The $4,000 difference between the world price of the final motor bicycle and the cost of the imported components represents domestic value added (VA). Suppose a 10 percent ad valorem (on the value) tariff is imposed on the imported motor bicycle.
What is the domestic price of the imported motor bicycle?
What is the possible price of the domestically produced motor bicycle?
What is the domestic value-added of the imported motor bicycle (VA)?
What is the effective rate of protection (ERP)?
What does the effective rate of protection depend on? Can it be bigger than the nomina; tariff rate? Explain
The domestic price of the imported motor bicycle, after the imposition of a 10% ad valorem tariff, is $6,600. The possible price of the domestically produced motor bicycle remains $10,000. The domestic value-added (VA) of the imported motor bicycle is $4,000. The effective rate of protection (ERP) is 66.67%.
The effective rate of protection depends on the domestic value-added and the domestic price of the imported and domestically produced goods. It can be higher than the nominal tariff rate due to the difference in prices and value-added between the imported and domestically produced goods.
To calculate the domestic price of the imported motor bicycle after the tariff, we add the tariff amount to the cost of imported inputs. The tariff rate is 10% of the imported inputs, which is $600 ($6,000 * 0.1). Therefore, the domestic price of the imported motor bicycle is $6,600 ($6,000 + $600).
The possible price of the domestically produced motor bicycle remains the same as the world price of $10,000 since there is no tariff on the domestically produced goods.
The domestic value-added (VA) of the imported motor bicycle is the difference between the world price of the final motor bicycle and the cost of imported components, which is $4,000 ($10,000 - $6,000).
The effective rate of protection (ERP) is the ratio of the domestic value-added to the domestic price of the imported motor bicycle, multiplied by 100%. In this case, it is (4,000 / 6,600) * 100% = 66.67%.
The effective rate of protection depends on the domestic value-added and the domestic price of the imported and domestically produced goods. It considers the value-added domestically and the relative prices to measure the level of protection provided by the tariff. Therefore, it can be higher or lower than the nominal tariff rate.
Learn more about trade policies here: brainly.com/question/30099657
#SPJ11
In 1995, Jenson Investments, a Delaware corporation with a 35 percent federal tax rate, formed Bestmark, a wholly owned German subsidiary. Bestmark conducts several profitable businesses in Europe and pays the 45 percent German corporate income tax. Best-mark has never paid a dividend to its U.S. parent and has accumulated $8.2 million after-tax earnings. Jenson recently sold 100 percent of its Bestmark stock to an unrelated purchaser and recognized a $6 million gain. Compute Jenson’s U.S. tax on this gain.
Jenson's U.S. tax on the gain from the sale of Bestmark stock is $2.1 million. This calculation takes into account the federal tax rate, the foreign tax credit for German corporate income tax, and the after-tax earnings accumulated by Bestmark.
To calculate Jenson's U.S. tax on the gain, we need to determine the taxable income and apply the federal tax rate. The gain recognized from the sale of Bestmark stock is $6 million.
Since Bestmark is a wholly owned subsidiary, the gain is considered a dividend distribution from the subsidiary to the parent company. This dividend is subject to U.S. tax at the parent company's federal tax rate. However, Jenson has already paid German corporate income tax on the earnings of Bestmark.
To avoid double taxation, the U.S. allows a foreign tax credit to offset the U.S. tax liability on the dividend. Jenson can claim a foreign tax credit for the German corporate income tax paid by Bestmark.
The U.S. tax on the gain is calculated as follows:
U.S. Tax = Gain - (Foreign Tax Credit)
U.S. Tax = $6 million - (German Corporate Income Tax Credit)
The German corporate income tax paid by Bestmark is calculated as:
German Corporate Income Tax = After-Tax Earnings / (1 - German Tax Rate)
German Corporate Income Tax = $8.2 million / (1 - 45%)
German Corporate Income Tax = $8.2 million / 0.55
German Corporate Income Tax = $14.909 million
Foreign Tax Credit = German Corporate Income Tax * U.S. Tax Rate
Foreign Tax Credit = $14.909 million * 35%
Foreign Tax Credit = $5.221 million
Substituting the values into the U.S. tax calculation:
U.S. Tax = $6 million - $5.221 million
U.S. Tax = $0.779 million
Therefore, Jenson's U.S. tax on the gain from the sale of Bestmark stock is $0.779 million or $779,000.
Jenson's U.S. tax on the gain from the sale of Bestmark stock is $0.779 million. This calculation takes into account the federal tax rate, the foreign tax credit for German corporate income tax, and the after-tax earnings accumulated by Bestmark. By applying the appropriate tax treatments and credits, the tax liability on the gain is determined.
To know more about tax, visit:-
https://brainly.com/question/30157668
#SPJ11
pois J Corp. reported the following: Units: 312 Sales $4139 Variable Costs $441 Fixed Costs $399 Compute contribution margin per unit. Round ONLY your final answer to 2 decimal places. Do not round intermediate computations. Save Answ
The contribution margin per unit for Pois J Corp. is $11.85. This means that each unit sold contributes $11.85 towards covering the company's fixed costs and generating profits.
Pois J Corp. has reported its units, sales, variable costs, and fixed costs. We need to compute the contribution margin per unit. This is a financial measure that tells how much each unit of a product contributes to covering fixed costs and earning profits. It is calculated by subtracting variable costs from the sales price.
The contribution margin is an important metric for understanding the financial performance of a company's products. It measures how much revenue is generated by each unit sold after deducting the variable costs of producing that unit. In other words, the contribution margin represents the amount of money that can be used to cover fixed costs and generate profits.
Contribution margin per unit = Sales price per unit - Variable cost per unit. Pois J Corp. reported that it sold 312 units for a total of $4139. It also reported variable costs of $441 and fixed costs of $399.
Sales price per unit = $4139 / 312 units = $13.26
Variable cost per unit = $441 / 312 units = $1.41
Contribution margin per unit = $13.26 - $1.41 = $11.85.
Learn more about contribution margin here:
https://brainly.com/question/32772728
#SPJ11
Company A prepares monthly financial statements. On its balance sheet as of December 31, 2021. Company A reported that Wages Payable had a balance of $855. During January 2022, the following events occurred:
• January 11th,2022: Paid wages of $5,240 to employees. $855 of
these wages paid were for work done in December 2021.
• January 25th, 2022: Paid wages of $16,871 to employees for work
completed January 12th – January 25th, 2022.
Assume accrued wages at the end of January 2022 were $1,055. What is the amount of total Wage Expense that Company A should record on its income statement for the month ended 1/31/2022?
a. $16,871 b. $21,256 c. $22,111 d. $22,311 e. $23,166
The answer is $22,311
Wages payable...............................$855
Wages expense...........................$4,385
Cash.................................................................$5,240
Wages Expense...........................$16,871
Cash................................................................$16,871
Wages Expense...........................$1,055
Wages Payable.........................................$1,055
I am confused about the part where Wages payable of $855 and wages expense of $4,385 are debited and cash of $5240 is credited. How are wages payable debited when it has a normal credit balance?
The Wages Payable account is debited with a balance of $4,385. The Wages Payable account will increase as a result of the accrued wages at the end of January 2022.
This balance should be credited when paid later, reducing the balance in the account. When employees work but have not yet been paid, Wages Payable is used to record this. Hence, it is a liability account that has a credit balance. The credit entry will be posted to the Cash account for $5,240, while the debit entry will be posted to the Wages Expense account for $4,385. The difference between the two is the quantity paid for work performed in December but not paid until January, which is $855.
This means that the balance in the Wages Payable account has been paid in full, and no further payments are required. On the other hand, when employees are paid for their work in January, the Wages Expense account is debited, and the Cash account is credited. The Wages Expense account is debited for $16,871, and the Cash account is credited for the same amount. Finally, Wages Payable is debited for $1,055 and credited for the same amount when accrued wages for January are paid at a later date. Thus, the amount of total Wage Expense that Company A should record on its income statement for the month ended 1/31/2022 is $22,311.
To learn more about account, visit:
https://brainly.com/question/29608710
#SPJ11
www.Assignmentx Assignment/takoAssignmentMain.do?inwoker-&taknAssignmentSessionLocator-inprogress-tabe eBook Show Me How Printem Equivalent Units of Materials Cost The Rolling Department of Kraus Steel Company had 3,400 tons in beginning work in process inventary (90% complete) an October 1. Durg October 56,300 tons were completed The ending work in process inventory on October 31 was 2,800 tons (10% complete) What are the total equivalent units for direct materials for October if materials are added at the beginning of the process? units Feedback Check My Work Are you determining the equivalent unts of materials added or of conversion of materials? When would materials typically be added the press? When we of these materials take place? Recall the definition of work in process
Equivalent units of direct materials for OctoberThe calculation of equivalent units of direct materials helps a company to measure the number of production units for direct materials. The calculation is essential to measure the overall cost of production.
This cost helps the company to control the production costs effectively.The Rolling Department of Kraus Steel Company had 3,400 tons in beginning work in process inventory (90% complete) on October 1. During October 56,300 tons were completed. The ending work in process inventory on October 31 was 2,800 tons (10% complete).
The equivalent units of direct materials that are present in the ending work-in-process inventory are 2,800*0.10 = 280 tons.The total equivalent units for direct materials for October are 3,060 + 52,900 + 280 = 56,240 tons.Thus, the total equivalent units for direct materials for October, if materials are added at the beginning of the process, are 56,240 tons.
To know more about inventory visit:
https://brainly.com/question/31827018
#SPJ11
An opinion in the Wall Street Journal in August 2016 estimates that trade agreements that have reduced taxes on imports have saved consumers approximately
A. $1,000 per year.
B. $5,000 per year.
C. $10,000 per year.
D. $25,000 per year.
The opinion in the Wall Street Journal in August 2016 estimates that trade agreements that have reduced taxes on imports have saved consumers approximately $1,000 per year.
The Wall Street Journal is an American business-focused, English-language international daily newspaper published by Dow Jones & Company, a division of News Corp. The publication's main competitors are The Washington Post and the New York Times.
The trade agreements that have reduced taxes on imports have saved consumers approximately $1,000 per year, according to an opinion in the Wall Street Journal in August 2016.
A free trade agreement (FTA) is a pact reached by two or more nations in which the parties specify commitments affecting trade in products and services, investor protections, and intellectual property rights, among other things.
To Know more about trade agreements
https://brainly.com/question/7019298
#SPJ11
For EACH of the following information systems, describe its key characteristics and discuss the extent to which it can support the management of the Human Resources (HR) function within an organization.
a) Enterprise Resource Planning (ERP) system;
b) Group Decision Support System (GDSS);
c) Expert system.
Answer:
a) Enterprise Resource Planning (ERP) system: An ERP system is a comprehensive software application that automates and integrates all aspects of a business, including finance, accounting, purchasing, inventory, human resources (HR), manufacturing, and customer relationships. The key characteristics of an ERP system include integrated data management, automated processes, and real-time reporting. ERP systems are used to manage and streamline HR operations such as recruitment, onboarding, payroll, performance management, and benefits administration. By automating these processes, ERP systems can help reduce manual errors, streamline processes, and improve data accuracy and visibility. However, the implementation of an ERP system can be complex and costly, requiring substantial resources, including time, money, and training.
b) Group Decision Support System (GDSS): A GDSS is a computer-based system designed to assist groups in making complex and subjective decisions. The key characteristics of a GDSS include the ability to analyze complex situations, model scenarios, and provide support for group decision-making. GDSS can be particularly useful for HR functions by providing tools for talent management, succession planning, and performance evaluation. By using a GDSS, HR teams can analyze and assess employee data, identify trends, and make evidence-based decisions about employee development and performance. However, the effectiveness of a GDSS depends heavily on the quality of the data used in the decision-making process, and the buy-in and commitment of the group members.
c) Expert system: An expert system is a computer-based system that uses artificial intelligence techniques to model the knowledge and experience of human experts in a particular domain. The key characteristics of an expert system include the ability to recognize patterns, make predictions, and provide recommendations based on specific scenarios. Expert systems can be useful for HR functions, such as talent acquisition, recruitment, and performance management. By using an expert system, HR teams can get recommendations on the best candidates for a particular job, assess employee performance, and identify areas for development. However, the effectiveness of an expert system depends heavily on the quality of the data used in the decision-making process, and the ability of the system to adapt to changing situations and decisions. Additionally, the expert system may require significant resources, including time and money, for development and maintenance.
If on December 1, 2017, TimkenSteel were to have sold long-lived equipment with a historical cost of $10 and accumulated depreciation of $8 for $4.5 cash, what would be the impact on the FY 17 statement of cash flow subtotals "Net Cash Provided by Operating Activities", "Net Cash Used by Investing Activities"?" No change in Net Cash Provided by Operating Activities, and less negative Net Cash Used by Investing Activities Increase in Net Cash Provided by Operating Activities, and no change in Net Cash Used by Investing Activities Decrease in Net Cash Provided by Operating Activities, and more negative Net Cash Used by Investing Activities Increase in Net Cash Provided by Operating Activities, and less negative Net Cash Used by Investing Activities
The correct answer is: No change in Net Cash Provided by Operating Activities, and less negative Net Cash Used by Investing Activities.
The impact on the FY 17 statement of cash flow subtotals would be as follows:
1. Net Cash Provided by Operating Activities: No change.
The sale of long-lived equipment is classified as an investing activity, not an operating activity. Therefore, it would not directly impact the "Net Cash Provided by Operating Activities" subtotal.
2. Net Cash Used by Investing Activities: Less negative.
Selling long-lived equipment for cash would result in a cash inflow in the investing activities section. Since the historical cost of the equipment was $10 and accumulated depreciation was $8, the book value of the equipment would be $2. Selling it for $4.5 cash would result in a gain on the sale of $2.5 ($4.5 - $2). This gain would be subtracted from the "Net Cash Used by Investing Activities" subtotal, making it less negative.
Therefore, the correct answer is: No change in Net Cash Provided by Operating Activities, and less negative Net Cash Used by Investing Activities.
To know more about Cash visit:
https://brainly.in/question/5036055
#SPJ11
Prioritize Requirements Activity and Techniques Subject - Requirement Life Cycle Management
Q- What is principled negotiation? How is principled negotiation different from a position-based negotiation? What is the main tenant of the principled negotiation technique?
Principled negotiation, also referred to as interest-based negotiation, is a problem-solving negotiation approach that seeks to satisfy the needs of both parties involved in the negotiation by achieving mutually beneficial outcomes.
It is different from position-based negotiation in that it focuses on the interests of the parties involved instead of their positions and involves a collaborative process in which both parties try to achieve their goals.
The main tenet of principled negotiation is that the interests of both parties should be addressed in the negotiation, creating a win-win outcome.
Principled negotiation, also referred to as interest-based negotiation, is a problem-solving negotiation approach that seeks to satisfy the needs of both parties involved in the negotiation by achieving mutually beneficial outcomes. It is different from position-based negotiation in that it focuses on the interests of the parties involved instead of their positions and involves a collaborative process in which both parties try to achieve their goals. In principled negotiation, the parties involved focus on creating value instead of just dividing it, making the relationship between the parties a crucial aspect of the negotiation.
The main tenet of principled negotiation is that the interests of both parties should be addressed in the negotiation, creating a win-win outcome. Principled negotiation is based on four principles:
Separate the people from the problem - This principle aims to prevent emotions from affecting the negotiation by focusing on the problem, not the people involved.
Focus on interests, not positions - In principled negotiation, parties focus on their interests rather than positions and try to identify common interests to achieve mutually beneficial outcomes.
Generate options for mutual gain - Parties in principled negotiation focus on creating multiple solutions to problems that could benefit both parties.
Evaluate alternatives based on objective criteria - Parties in principled negotiation evaluate options based on objective criteria, creating a fair process that can benefit both parties.
Learn more About Principled negotiation from the given link
https://brainly.com/question/28431264
#SPJ11
Which one of the following is not a question to ask when an organisation formulates its mission statement?
a.
What value do we create for society?
b.
What technology are we going to use to provide the primary products and services?
c.
Who is our primary target market?
d.
What is our primary product or service?
Option B: What technology are we going to use to provide the primary products and services? is not a question to ask when an organization formulates its mission statement.
What is a mission statement?A mission statement is a concise and compelling declaration of a company's core goal and purpose that usually serves to guide decisions, actions, and resource allocation. It's a statement of the company's reason for being, and it should be aligned with the company's values and objectives.A mission statement is an important tool for keeping a company on track.
It aids in the development of a company's internal culture, provides direction for employees, and provides a vision of where the business wants to go. Furthermore, it serves as a basis for brand building and marketing campaigns.
Question to ask when an organization formulates its mission statementThe following are some of the questions to ask when an organization formulates its mission statement.
To know more about technology visit:
brainly.com/question/9171028
#SPJ11
Develop a "consumer profile" of a prototypical target client (a maker with entrepreneurial spirit) for the company ShapeMaster.Inc. [Include both demographic and behavioral characteristics with an emphasis on media-use behavior]
Include the following in description:
Where can you discover and then engage this unseen target via digital communication?
A succinct description of a prototypical client in the target group [ 150 words]
Provide a list of at least 5 demographic and 5 behavioral descriptors. [No need to create a comprehensive profile]
Develop a digital media behavior profile based on your descriptions.
How does this person use the Internet?
How much time do they spend online?
What do they do when they are on the Internet?
What platforms do they use frequently?
What websites do they visit frequently?
Online maker communities, entrepreneurial forums, social media platforms, industry-specific websites, and online marketplaces.
A succinct description of a prototypical client in the target group: The prototypical client for ShapeMaster.Inc is a tech-savvy and creative maker with an entrepreneurial spirit, aged 25-40, with a college education, and an interest in starting their own business.
Demographic descriptors: Age: 25-40, Gender: Male or female, Education: College graduate or higher, Income: Middle to upper-middle class, Location: Urban or suburban areas.
Behavioral descriptors: Tech-savvy, Creative, Entrepreneurial mindset, Active in maker communities, Constant learner.
Digital media behavior profile: They use the Internet for research, product sourcing, and networking within the maker community. They spend several hours online, visit maker forums, engage with social media platforms, and frequently visit websites related to 3D printing, CNC machining, and entrepreneurial resources. They use platforms for marketing and networking.
Online maker communities, entrepreneurial forums, social media platforms, industry-specific websites, and online marketplaces. A succinct description of a prototypical client in the target group:
The prototypical client for ShapeMaster.Inc is a maker with an entrepreneurial spirit. This individual is typically a tech-savvy and creative individual who enjoys building and creating innovative products. They have a passion for turning their ideas into reality and are driven by the desire to start their own business. This target client is often a self-starter, constantly seeking new opportunities and challenges. They are likely to have a background in engineering, product design, or a related field. This individual is motivated by the potential for financial success and the ability to make a positive impact through their creations.
Demographic descriptors:
Age: 25-40 years old
Gender: Male or female
Education: College graduate or higher
Income: Middle to upper-middle class
Location: Urban or suburban areas
Behavioral descriptors:
Tech-savvy: Comfortable using various digital tools and software.
Creative: Enjoys designing and building unique products.
Entrepreneurial mindset: Seeks opportunities to start their own business.
Active in maker communities: Engages with online platforms and forums to connect with like-minded individuals.
Constant learner: Keeps up-to-date with industry trends and seeks knowledge to enhance their skills.
Digital media behavior profile:
This person uses the Internet extensively for research, product sourcing, and networking within the maker community. They spend a significant amount of time online, often dedicating several hours a day to their projects and exploring new ideas. When online, they visit maker forums, participate in online workshops, watch tutorials, and engage with social media platforms for inspiration.
They frequently visit websites related to 3D printing, CNC machining, prototyping tools, and entrepreneurial resources. Platforms are commonly used for marketing their products, sourcing suppliers, and networking with potential business partners. This target client values online platforms that foster creativity, collaboration, and provide opportunities for business growth.
To learn more about digital communication, here
https://brainly.com/question/18825060
#SPJ4
Lens Co manufactures lenses for use by a wide range of commercial customers. The company has two divisional manager who has overall responsibility for all aspect of running their division and the divisions are currently treated as investment centres. Each manager, however, has an authorization limit divisions the photographic division (P) and the optometry division (O). Each of the division is run by a of GHe 15,000 per item for capital expenditure and any item costing more than this must first be approved by head office. During the year, head office made a decision to sell a large amount of the equipment in division P and replace it with more technologically advanced equipment. It also decided to close one of Division O's factories in a country deemed to be politically unstable with the intention of opening a new factory elsewhere in the following year. Both divisions trade with overseas customers choosing to provide these customers with 60 days credit to encourage sales. Due to difference in exchange rates between the time of invoicing the customers and receiving the payment 60 days later, exchange gains and loses often occur. The cost of capital for Lens Co is 12% per annum. The following data relates to the year ended 30 November 20X6 Revenue Gains on sale of equipment Direct labour Direct material Divisional overheads Trading profit Exchange gain/(loss) Exceptional costs for factory closure Allocated head office costs Net divisional profit Depreciation on uncontrollable assets Included in divisional overhead Division P GHC 000 14,000 400 14,400 (2,400) (4,800) (3.800) 3,400 (200) (680) 2.520 320 Page 3 of 5 Division O GHC 000 18,800 18,800 (3,500) (6,500) (5,200) 3,600 460 (1,800) (1,040) 1,220 (Total 15 marks) 460 Division P GHc 000 Non-current assets controlled by the division No-current assets controlled by head office Inventories Trade receivables Overdraft Trade payables 15,400 3,600 1,800 6,200 500 5,100 Division O GHC 000 20,700 5,200 3,900 8,900 7,200 To date, managers have been paid a bonus based on return on investment (ROI) achieved by their division. However, the company is considering whether residual income would be a better method. a. Calculate the return on investment (ROI) for each division for the year ended 30 November 20X6. ensuring that the basis of the calculation makes it a suitable measure for assessing the divisional manager's performance. (4 b. Explain why you have included or excluded certain items in calculating the ROI in question (a) above, stating any assumptions you have made. (4marks) c. Briefly discuss whether it is appropriate to treat each of the division of Lens Co as investment centres. d. Discuss the problems involve in using ROI to measure the managers performance. (4marks) (3marks) (15 marks)
Calculation of return on investment (ROI) for each division for the year ended 30 November 20X6:Return on investment (ROI) = Trading profit / Investment * 100 Division P = 2520 / (15,400 + 3,600 + 1,800 + 6,200 - 500 - 5,100) * 100 = 13.75%Division O = 1220 / (20,700 + 5,200 + 3,900 + 8,900 - 7,200) * 100 = 6.13%b.
The appropriateness of treating each division of Lens Co as investment centres is dependent on the nature of the business operations. Investment centres are entities whose managers are responsible for their revenues, costs, and invested capital.
Therefore, it is appropriate to treat each division of Lens Co as investment centres.d. The problems associated with using ROI as a measure of manager performance are as follows:ROI does not account for changes in capital or investment over time. ROI can be manipulated by managers by either delaying investments or divesting assets to boost the ROI.
To know more about Trading visit:
https://brainly.com/question/32661935
#SPJ11
A rather upscale bar in Manhattan is well-known for having a clientele that is
made up exclusively of "Beer Snobs," or individuals who believe that drinking anything less
than the highest quality beer varieties is beneath them. To such individuals, Bud Light would be
considered an inferior good. When the Covid-19 pandemic began, the vast majority of the clients
at this bar saw their incomes decline. Additionally, the pandemic also caused many of the
factories where Bud Light is produced to shut down for a period of time.
Create a graph to show how the market for Bud Light among the patrons of this bar was impacted in the early months of
the pandemic.
What conclusions can you draw about how the market price and the quantity supplied/demanded of Bud Light will be affected?
The market for Bud Light among patrons of upscale bar would experience a decrease in both the price and quantity supplied and demanded during the early time period the pandemic. The combination of reduced incomes and factory shutdowns will lead to a decrease in demand and supply, resulting in a downward shift in the market for Bud Light
During the early months of the Covid-19 pandemic, the market for Bud Light among the patrons of upscale bars in Manhattan would have been impacted in several ways. The effects on the market by considering the changes in market price and the quantity supplied and demanded can be analyzed.
Decreased Income of Patrons:
The majority of the bar's clients have experienced a decline in their incomes due to the pandemic. This reduction in income would likely lead to a decrease in demand for Bud Light. Bud Light is typically associated with lower-quality beer options as an inferior good. Individuals may choose to cut back on expenses when they have less disposable income, including their consumption of inferior goods just like Bud Light. Therefore, the demand for Bud Light would definitely decrease.
Factory Shutdowns:
The pandemic caused so many Bud Light factories to shut down for a period of time. This resulted in a decrease in the quantity supplied of Bud Light in the market. With fewer factories producing Bud Light, the supply of the product was constrained, leading to a decrease in the quantity available for purchase.
The combined effects of decreased demand and decreased supply resulted in a shift in the market for Bud Light. This can be shown in a graph showing a leftward shift in the demand curve and a leftward shift in the supply curve.
As a result, the following conclusions can be drawn :
Market Price: The decrease in both demand and supply put downward pressure on the market price of Bud Light. With a very less demand and a decrease in supply, the equilibrium price would likely decrease. This is due to the decrease in demand would push prices downward, while the decrease in supply would also reduce the ability to charge higher prices.
Quantity Supplied and Demanded: The quantity supplied and demanded of Bud Light would both likely to decrease. The decrease in demand would result in very few consumers purchasing Bud Light, leading to a decrease in the quantity demanded. On the same hand, the decrease in supply due to factory shutdowns would limit the quantity available in the market, causing a decrease in the quantity supplied.
So overall, the market for Bud Light among the patrons of the upscale bar experienced a decrease in both the price and quantity supplied and demanded during the early stages of the pandemic. The combination of reduced incomes and factory shutdowns would lead to a decrease in demand and supply, resulting in a downward shift in the market for Bud Light
Learn more about bud light from the given link:
brainly.com/question/28153210
#SPJ11