Normal

Question

Question 22

A projectile is launched into space where there is very little friction. According to Newton's law of inertia, the projectile willmost likely continue to travel in a straight line and?

The Power generated is 77.5 Watt

                                       Power = Work / time

                                                P = W / t

                                                P = Fd/t

                                                P = mgd/t

where, F = force = mg

           d = displacement

            t = time

Given, mass (m) = 155Kg

           g = acceleration due to gravity = 10 m/s^2

           d = 150 cm = 0.15 m

           t = 5.00 x 10^-2 min = 3 seconds

Putting these values in above equation, we get P= 77.5 Watt.

To know more about power visit:

https://brainly.com/question/14777852

#SPJ1

"Effort multiplied by an arm equals burden multiplied by an arm," The various loads on the proportionally shorter load arm can be moved by the effort arm.

A lever is a straightforward device with a solid beam and a fulcrum. The effort (input force) and load (output force) are applied to the beam's ends. The pivot of the beam is thought to be the fulcrum.

Levers are devices that increase force, to put it simply. Because they merely have the handle and the fulcrum, we refer to them as "basic machines." The "arm" of the lever is the handle or bar; it is the portion that you push against or pull towards.

To know more about law of lever visit:-

https://brainly.com/question/2450974

#SPJ4

Answer: 3.71

Explanation:

Just have trust bro

Forces acting upon a 100-kg crate which is sliding down an inclined plane, the plane is inclined at an angle of 30 The coefficient of friction between the crate and the incline is 0.3. the net force of the crate is 230N.

Solution:

Given:

Mass of crate=100kg

Angle of inclination=30°

coefficient of friction=0.3.

Now,

F∥=mgsinθ=(100)(10)0.5=500N is the force acting parallel to the inclined plane.

then,

Normal force= mgcosθ=(100)(10)(0.9)=900N

then, frictional force =

Frictional force=μkF⊥=(0.3)(900)=270N

Finally the net force = F∥-frictional force

the net force =500-270

the net force =230N

Hence, the net force is 230N

To know more about coefficient of friction visit

https://brainly.com/question/8139435

#SPJ1

The required mass of the object with an acceleration of 10 m/s² and a force of 10 newtons to accelerate it is 1 kg.

From Newton's second's law of motion, force is described in equation form as, F = m × a

where, m is mass

a is acceleration

Given that,

Acceleration of an object = 10 m/s²

Force needed to accelerate the object = 10 N

Object's mass = ?

From the above equation, making mass as the subject, we have,

F = m × a

m = F/a = 10/10 = 1 kg

Thus, the required object's mass is calculated to be 1 kg.

To know more about mass:

https://brainly.com/question/13401016

#SPJ4

Answer:

The correct answer is option A: they are isotopes.

Explanation:

From atom X we know that the number of protons is 7 and the number of neutrons is 7 and from atom Z we know that the number of protons is 7 and the number of neutrons is 8.

Since the number of protons of atom X and atom Z is the same, we have that atom X and atom Z is the same element. The difference in the number of neutrons tells us that atom X and atom Z are isotopes. Remember that an isotope is one element that has atoms with different numbers of neutrons.            

The mass number is given by:              

[tex] A = p + n [/tex]

Where n is the number of neutrons and p is the number of protons.

For atom X and atom Z we have:

[tex] A_{x} = 7 + 7 = 14 [/tex]

[tex] A_{z} = 7 + 8 = 15 [/tex]

Hence, they have a different mass number.  

We know that the element with 7 protons is nitrogen. The first isotope is [tex]^{14}_{7}N[/tex] and the second isotope is [tex]^{15}_{7}N[/tex]. Both isotopes are stables (they are not radioactive).  

Therefore, the correct answer is option A: they are isotopes.

I hope it helps you!                                                          

On a day with complete cloud cover, the visible light headed toward Earth: The clouds reflect much of it back to space, though some still reaches the surface.

When the sun shines, the Earth's atmosphere scatters it in all directions. This is why certain sections of the Earth appear brighter than others during the day—the Sun's light has been reflected off of the ground and other objects. When the planet is completely clouded over, no light reaches Earth at all. The term "nowhere" refers to the fact that there is no such thing as a sunrise since there is no such thing as a dawn. On a cloudy day, visible light directed toward the earth is misdirected and darkened by the clouds. This is due to the fact that shorter wavelengths of visible light scatter more than longer wavelengths. Rayleigh scattering is the name given to this phenomena.

We can learn more about Rayleigh scattering here:

https://brainly.com/question/26851124#

#SPJ4

Answer:

50 kg

Explanation:

Given,

Force ( F ) = 100 N

Acceleration ( a ) = 2 m/s^2

To find : Mass ( m ) = ?

Formula : -

F = ma

m = F / a

= 100 / 2

m = 50 kg

Therefore, the mass of the object is 50 kg.

Answer:

im 95% sure the answer is d

Answer:

CaI2

Explanation:

A. dependent

This is the answer

Answer:

cant see the question to small

Explanation:

Answer:

Speed is the measure of how fast something moves

Explanation:

The work done upon the backpack is 3293 Joule.

The definition of force in physics is: The push or pull on a massed object changes its velocity.

An external force is an agent that has the power to alter the resting or moving condition of a body. It has a direction and a magnitude.

A spring balance can be used to calculate the Force. The Newton is the SI unit of force.

The work done upon the backpack is = applied force × displacement × cosα

= 26.7 N × 129 meters × cos17°

= 3293 Joule.

Learn more about force here:

https://brainly.com/question/13191643

#SPJ1

The cross-sectional area of a conductor is defined as the diameter of the conductor in mils, squared.

What is  conductor?

A conductor is a material or object that allows the flow of electric current. It is a material that has a large number of free electrons which can move freely between atoms, allowing for the current to flow through the material. Conductors can be either solid or liquid, and can be used to create electrical circuits and systems. Common conductors used in electrical systems include copper, aluminum, silver, and gold. These materials have high electrical conductivity, meaning they have low resistance and allow for large amounts of electric current to pass through them. Conductors are essential in many electronics and electrical devices, as they are responsible for carrying the electric current from one component to another.

To learn more about conductor

https://brainly.com/question/492289

#SPJ4

Correct option is A, A heavy truck and a small truck roll down a hill. Neglecting friction, at the bottom of the hill the heavy truck has greater acceleration.

Momentum and mass are directly proportional in direction. This is so because mass times velocity make up the equation for momentum. Another way to express this is as p = m*v, where p stands for momentum, m for mass, and v for velocity. As a result, momentum doubles if mass is increased by a factor of two but velocity remains constant.

p = m v . The equation demonstrates that momentum is directly related to an object's mass (m) and velocity (v). As a result, an object's momentum increases with increasing mass or velocity. The momentum of a large, swift object is larger than that of a small, slower object.

The definition of momentum is "mass in motion." Since every item has mass, if it is moving, it must have momentum because its mass is in motion. The amount of motion and the speed of the motion are the two factors that determine how much momentum an item possesses.

To learn more about momentum from given link

https://brainly.com/question/18798405

#SPJ4

The greater the mass of an object, the more particles there are in the sample and the more thermal energy it possesses at the same temperature. Assume you have some boiling hot water at 100 degrees Celsius to demonstrate this concept.

The energy contained inside a thermodynamic system is quantified as the quantity of energy required to get the system from its standard internal state to its current internal state of interest, accounting for energy gains and losses owing to changes in its internal state, including magnetization.  

It eliminates the kinetic energy of motion and the potential energy of the system's overall location in relation to its surroundings and external force fields.

Learn more about internal energy  to visit this link

https://brainly.com/question/11278589

#SPJ4

Answer:

El valor de la fuerza entre las cargas es 172.8 N.

Explanation:

La fuerza electromagnética o electrostática es la interacción que se da entre cuerpos que poseen carga eléctrica.

La ley de Coulomb se emplea para calcular la fuerza eléctrica que actúa entre dos cargas en reposo y habla sobre la influencia que tienen las cargas y  la distancia sobre la fuerza de atracción o repulsión de un cuerpo  cargado eléctricamente. Esta ley indica que la magnitud de cada una de las fuerzas eléctricas con que interactúan dos cargas puntuales en reposo es directamente proporcional al producto de la magnitud de ambas cargas e inversamente proporcional al cuadrado de la distancia que las separa. La fuerza es de repulsión si las cargas son de igual signo, y de atracción si son de signo contrario.

La ley de Coulomb se representa matemáticamente mediante:

[tex]F=k*\frac{q1*q2}{r^{2} }[/tex]

donde:

En este caso:

Reemplazando:

[tex]F=9*10^{9} \frac{N*m^{2} }{C^{2} }*\frac{6*10^{-6}C *8*10^{-6}C}{(0.05 m)^{2} }[/tex]

Resolviendo se obtiene:

F= 172.8 N

El valor de la fuerza entre las cargas es 172.8 N.

Answer:

B

Explanation:

Got it right

Answer:

B. X: Releases energy to the photosphere

Y: Takes longer for photons to move through

Explanation:

Right on ED2021, goodluck!

According to Ohm's Law, the total current flowing through a circuit with a resistance of 1200 ohms and a 12 V power supply is equal to 0.01 ampere.

Electric current is inversely correlated with resistance according to Ohm's Law and proportionate to voltage. 'The law can be expressed mathematically as V = IR, in which 'V' is the voltage variation 'I' is the flowing current in amps, & the resistance (R) in ohm.

Given data :

Resistance = 1200 ohm

power supply = 12 V

By using Ohm's law

V = I × R

I = V / R

I = 12 / 1200

I = 0.01 ampere.

To know more about Ohm's law visit :

https://brainly.com/question/1247379

#SPJ1

Answer:

Yellow

Explanation:

Please mark as brainliest if answer is right

Have a great day, be safe and healthy  

Thank u  

XD  

Answer:

B

Explanation:

it has the best view for seeing the shape of the arm in a spiral galaxy

The type of view would best allow scientist to see the shape of the arm in a spiral galaxy is Side diagnol.

Spiral galaxies are twisted collections of stars and gas that often have beautiful shapes and are made up of hot young stars.

Most of the galaxies that scientists have discovered so far are spiral galaxies, as opposed to the other two main categories of galaxy shapes — elliptical and irregular. The Milky Way – the galaxy that includes Earth and our solar system – is an example of a spiral galaxy.

The majority of spiral galaxies have a flat, spinning disk of stars around a central bulge. Older, fainter stars make up the bulge in the center, which is thought to house a supermassive black hole.

Therefore, The type of view would best allow scientist to see the shape of the arm in a spiral galaxy is Side diagnol.

To learn more about Spiral galaxy, refer to the link:

https://brainly.com/question/13074009

#SPJ2

The rougher the surface the _Greater_ the friction. The _Smooth_ the surface the lesser the friction produced.

The rougher surface has Greater friction, as rough surfaces have more irregularities which lead to interlocking of the surface as a result it increases the friction between two surfaces.

Similarly, in the case of a Smooth surface, there are no irregularities so two surfaces could easily slit without any friction.

Friction is necessary for a number of places so that contact between two surfaces could be improved for walking we need friction and in so many places we try to reduce the friction so that we can save energy.

And we can reduce the friction by applying lubricates between the surfaces, and increase the friction we make the surface rougher.

Learn More about Friction: https://brainly.com/question/24338873

Index fossils are fossils that are used to help determine the relative age of rock layers and sedimentary strata. They are typically small, widely distributed organisms that lived for a relatively short period of time and are characteristic of a specific geological period. Index fossils are useful because they can help geologists and paleontologists to determine the relative age of rock formations and to understand the Earth's geological history.

It is unlikely that humans would be useful as index fossils in the future, as the time period during which humans have existed on Earth is relatively short compared to the age of the Earth as a whole. In addition, humans are not small, widely distributed organisms like many of the commonly used index fossils. Instead, humans are large, highly adapted organisms that have a wide range of habitats and are found on most of the continents.

However, it is possible that artifacts or other remains associated with human activity could be used as index fossils in the future. For example, the presence of certain types of tools or other materials might be used to help determine the relative age of a site or to understand the environmental conditions and human activity in a particular region at a specific point in time.

Hope This Helps You!

I got you! :D

this is my essay i wrote for my teacher.

Every storm cloud has a silver lining; in the case of space weather, that lining is the aurora borealis, more commonly known as the Northern Lights. (Viewers in the southern hemisphere are treated to an equivalent version called the aurora australis, or Southern Lights.) The phenomenon is best observed on a clear, cold night around the spring or autumn equinox. Find an open patch of sky well away from the interfering lights of the city, and you may catch a glimpse of the spectacle: curtains of pale light-green and blue, sometimes red or violet-shimmering above the northern horizon for minutes or even hours at a time.

Auroras occur when electrons and protons from the Sun strike gas molecules in Earth's upper atmosphere. As the solar particles encounter Earth's magnetosphere, they are drawn along the magnetic field lines and funneled toward the North and South poles. There, high above Earth's surface, they collide with atmospheric molecules, energizing them and causing them to glow. The colors that result depend on the gas molecules involved. The brightest and most common auroral color, a brilliant yellow-green, is produced by the glow of oxygen molecules roughly 60 miles above Earth. Ionized nitrogen molecules emit blue light when hit by solar particles; neutral nitrogen molecules emit a purplish-red light. All-red auroras are rare; they are caused by the glow of oxygen atoms 200 miles above Earth. The size and intensity of the aurora varies from night to night, and moment to moment, depending on the strength of the solar wind. On April 6, 2001, a large geomagnetic storm produced an aurora that was seen as far south as Alabama. The scientific understanding of auroras has advanced enormously in recent years with the launch of satellites designed expressly to study them. Instruments aboard NASA's Polar spacecraft monitor ultraviolet radiation and chemical changes in the upper atmosphere, effectively offering an up-to-the-minute report on the shape and intensity of the aurora. The Imager for Magnetopause-to-Aurora Exploration (IMAGE) spacecraft, launched in 2000, studies Earth's magnetosphere in astounding detail. It can watch auroras evolve over a period of hours, and can even see auroras flickering in the far-ultraviolet wavelength. Recently and for the first time, scientists observed a phenomenon known as "black auroras." A black aurora isn't really an aurora at all: it's the dark, empty space within a colorful aurora where one would otherwise expect auroral activity to be visible. Nonetheless, black auroras exhibit distinct patterns, including curls, rings and writhing black patches. Nowadays, scientists often can forecast a spectacular aurora hours or days in advance, so it's worth checking space weather websites (See Related Links) with some regularity.

In the 1970s, with the aid of the Hubble Space Telescope, it became apparent that Earth is not the only planet with auroras. On both Jupiter and Saturn, auroras appear pink due to the large amounts of hydrogen in those planets' atmospheres. Jupiter's aurora has proved to be particularly intriguing. On Earth, the aurora is powered by a barrage of charged particles from the Sun. On Jupiter, auroras are generated instead by volcanic particles from the Jovian moon Io. These particles become ionized, expand and then are trapped in Jupiter's tremendous magnetic field. Rotating once every ten hours, Jupiter generates auroras many times more powerful than those on Earth. However, Earth's auroras remain unique in one respect: they are (at times, anyway) green. Indeed, Earth is the only known planet with green auroras, because it is the only known planet with an oxygen-rich atmosphere. As scientists look deeper into the universe for signs of other, potentially habitable worlds, auroras are one clue they examine. If a distant, unknown planet has shimmering green auroras, that's a strong indication that its atmosphere is rich in oxygen, perhaps enough to support life. Whether that life is capable of appreciating the auroras well, that's another issue.

Answer:

a = v2/r, for an object moving with a constant speed, v, around a circle of radius, r. We will also verify that the direction of the acceleration vector is toward the center of the circle.

substitute your numbers into the formula

5.0 = v2/45.0

then cross multiply to get your final answer

The coefficient of kinetic friction between the surfaces is 0.48.

Friction is simply defined as the force that prevents a sliding object from moving. Kinetic friction is a natural phenomenon that disrupts the motion of two or more objects. The force acts in the opposite direction of the motion of the object.

When we stop a car, we use brakes, which is where friction comes into play. When walking, friction is to thank once more. But when we have to stop in the middle of a puddle, things become more difficult because friction is less and cannot help as much.

Solve for a using K3:    [tex]$v^2=v_0^2+2 a d$\\[/tex]

[tex]& 19^2=0_0^2+2 a 38 \\& a_x=-4.75 \mathrm{~m} / \mathrm{s}^2[/tex]

[tex]\begin{aligned}& \text F_{\text {net }}=-f_k=m a_x, \text { and } \\& -f_k=\mu_k F_n=\mu_k m g, \text { so we can say } \\& -m a_x=\mu_k \cdot m g \\& \mu_k=\frac{m a_x}{m g}=\frac{-a_x}{g} \\& \mu_k=\frac{-(-4.75)^m / s^2}{9.8}=0.48\end{aligned}$$[/tex]

Thus, The coefficient of kinetic friction between the surfaces is 0.48.

Learn more about kinetic friction

https://brainly.com/question/19180015

#SPJ4

Answer:

Explanation: case b i think

Answer:

The acceleration of an object can be calculated using Newton's second law of motion, which states that the force acting on an object is equal to the mass of the object multiplied by its acceleration. The equation is:

F = ma

where F is the force, m is the mass, and a is the acceleration.

So, if we know the mass of the object (m = 56 kg) and the force acting on it (F = 800 N), we can calculate the acceleration (a) by dividing the force by the mass:

a = F / m

a = 800 N / 56 kg

a = 14.28 m/s^2

So the acceleration is 14.28 m/s^2

If a running system has a total change in the heat of 315 joules, and it is running at a temperature of 350 k, the entropy will be e. 0.762 joules/kelvin.

Entropy is essential for understanding the behavior of many physical systems, such as in thermodynamics, statistical mechanics, and thermochemistry.

Entropy can be used to analyze the efficiency of a system, as well as its stability and predictability.

This can be calculated by using the formula  S = ΔQ/T, where S is entropy, ΔQ is the total change in heat and T is temperature. In this case ΔQ = 315 Joules and T = 350K.

Plugging these values into the equation gives us S = 315/350, which equals 0.762 joules/kelvin. Hence, option e is correct.

To learn more about heat, click here:

https://brainly.com/question/13439286

#SPJ4