need help x-y=11 2x+y=19

Answer: 14x + 14

Step-by-step explanation: To find the perimeter of the room without the door, we need to add up the four sides. Using the simplified expression for the perimeter, which is 2(4x+1) + 2(3x+6), we can simplify further by distributing the 2:

2(4x+1) + 2(3x+6) = 8x + 2 + 6x + 12

Combining like terms, we get:

14x + 14

Therefore, the perimeter of the room without the door in simplest form is 14x+14.

Let x be the number of $1 bills and y be the number of $5 bills that Hermione had in her purse. Then we can write two equations based on the given information:

x + y = 12 (because Hermione had 12 bills in total)

x + 5y = 40 (because the total value of the bills was $40)

We can solve this system of equations by first solving the first equation for x:

x = 12 - y

Substituting this expression for x into the second equation, we get:

(12 - y) + 5y = 40

Simplifying and solving for y, we get:

4y = 28

y = 7

Therefore, Hermione had 7 $5 bills in her purse. Answer: 7.

The measure of ∠1 is 117° before that we have to find out the angle of x, the values are in degrees.

An angle is the geometric measure of the space between two intersecting lines or planes, usually expressed in degrees, radians, or other units of measurement.

Since the sum of the measures of angles in a triangle is 180°,

m∠1 + m∠2 + m∠3 = 180°

putting the given values:

(7x - 21)° + (-5x + 75)° + m∠3 = 180°

Simplifying the above equation,

2x + 54° + m∠3 = 180°

Subtracting 54° from both sides, we get:

2x + m∠3 = 126°

We know that ∠3 is a right angle, which means its measure is 90°. Substituting this value, we get:

2x + 90° = 126°

Subtracting 90° from both sides, we get:

2x = 36°

Dividing both sides by 2, we get:

x = 18°

Now that we know the value of x, we can substitute it into the expression for m∠1:

m∠1 = (7x - 21)° = (7 x 18 - 21)° = 117°

Therefore, the measure of ∠1 is 117°.

To know more about angle, visit:

https://brainly.com/question/1309590

#SPJ1

The measure of angle 1, we need to use the given equation that relates angle 1 to variable x. The equation is

[tex] m ∠ 1 = ( 7 x − 21 ) °[/tex].

the measure of angle 1 is 35 degrees.

This means that the measure of angle 1 is equal to 7 times the value of x minus 21 degrees.
However, we are not given the value of x directly. Instead, we are given the measure of angle 2 in terms of x. The equation for angle 2 is

[tex] m ∠ 2 = ( − 5 x + 75 ) °[/tex].

This means that the measure of angle 2 is equal to negative 5 times the value of x plus 75 degrees.
We can set these two equations equal to each other because angle 1 and angle 2 are vertical angles and therefore congruent. This gives us the equation:
[tex]7x - 21 = -5x + 75[/tex]
We can simplify this equation by adding 5x to both sides:
[tex]12x - 21 = 75[/tex]
Then, we add 21 to both sides:
[tex]12x = 96[/tex]
Finally, we divide both sides by 12:
[tex]x = 8[/tex]
Now that we have found the value of x, we can plug it into the equation for angle 1 to find its measure:
[tex]m ∠ 1 = (7 * 8) - 21[/tex]
[tex]m ∠ 1 = 56 - 21[/tex]
[tex]m ∠ 1 = 35 degrees[/tex]

for such more questions on vertical angles

https://brainly.com/question/29071447

#SPJ11

To find the probability that at least one of the two cards drawn from a standard deck of 52 playing cards is a spade, we can use the complement rule.

The complement of the event "at least one of the cards is a spade" is "neither of the cards is a spade."

To find the probability that neither of the two cards is a spade, we can multiply the probabilities of drawing a non-spade on the first card and a non-spade on the second card:

P(neither is spade) = (39/52) x (38/51) = 0.4498 (rounded to four decimal places)

P(at least one is spade) = 1 - P(neither is spade)

P(at least one is spade) = 1 - 0.4498

P(at least one is spade) = 0.5502 (rounded to four decimal places)

Therefore, the probability that at least one of the two cards drawn from a standard deck of 52 playing cards is a spade is 0.5502 or approximately 55.02%.

To learn more about “probability” refer to the https://brainly.com/question/13604758

#SPJ11

Answer:

yes

Step-by-step explanation:

replace r and q with y and x:

y = 4x - 5

It is a line.

If we randomly select 62 travel mugs and measure the amount of soft drink dispensed in each mug, the sample mean will be within 0.5 ounces of the population mean with 95% confidence.

To determine the number of travel mugs required for the study, we need to use the formula for sample size determination for means. The formula is:

n = (Z^2 * σ^2) / E^2

Where:

n = sample size

Z = Z-score for the desired confidence level (e.g., 1.96 for 95% confidence level)

σ = standard deviation of the population

E = desired margin of error (i.e., the maximum difference between the sample mean and the population mean)

In this case, we are given that the standard deviation of the soft drink dispensed is 2.0 ounces and we want the sample mean to be within 0.5 ounces of the population mean. Let's assume a 95% confidence level, which corresponds to a Z-score of 1.96. Plugging in the values, we get:

n = (1.96^2 * 2^2) / 0.5^2 = 61.6

We need to round up to the nearest whole number, so the final sample size should be 62 travel mugs. The larger the sample size, the smaller the margin of error will be, but it also means more time and resources required for the study.

To learn more about distribution click on,

https://brainly.com/question/13017311

#SPJ4

Complete question is:

a baseball parkamount of soft drink dispensed is normally distributed with standard deviation 2.0 ounces. how many travel mugs should be included in a study if it is desiredthat the sample mean soft drink dispensed be within 0.5 ounces of the population mean with 95% confidence.

Answer:  graphing 0,2 would place the 0 on the x-axis and 2 on the y-axis, whereas graphing 2,0 would place the 2 on the x-axis and 0 on the y-axis

Step-by-step explanation:

Answer:

Step-by-step explanation:

Graphing the point (0, 2) means plotting a point at the coordinates where the x-axis is located at 0 and the y-axis is located at 2. This means that the point would be located at the upper part of the y-axis.

On the other hand, graphing the point (2, 0) means plotting a point where the x-axis is located at 2 and the y-axis is located at 0. This means that the point would be located on the x-axis to the right of the origin.

In general, the order of the coordinates in an (x, y) pair represents the horizontal and vertical position of the point, respectively. Thus switching the order of the coordinates changes the position of the point on the coordinate plane.

To make a table of the two possible payouts on each policy with the probability of each, we can use the following information:

The premium is $280.

The probability of a fire is 0.1% or 0.001.

In the event of a fire, the insured damages will be $270,000.

There are two possible outcomes:

No fire occurs:

The probability of this outcome is 1 - 0.001 = 0.999.

The payout is $0.

Fire occurs:

The probability of this outcome is 0.001.

The payout is $270,000.

Therefore, the table of the two possible payouts on each policy with the probability of each is:

Outcome Probability Payout

No fire           0.999            $0

Fire                   0.001       $270,000

Note that the expected value of the policy can be calculated as the sum of the products of the probabilities and payouts:

Expected value = (0.999 x $0) + (0.001 x $270,000) = $270.

The probability of getting a sum of at least 3 when two different colored dice are rolled simultaneously is 5/6.

To calculate the probability of getting a sum of at least 3 when two different colored dice are rolled simultaneously, we need to list out all possible combinations of the dice and find out how many of them add up to at least 3. Let's begin:

Possible combinations when rolling two dice:

1 + 1, 1 + 2, 1 + 3, 1 + 4, 1 + 5, 1 + 62 + 1, 2 + 2, 2 + 3, 2 + 4, 2 + 5, 2 + 63 + 1, 3 + 2, 3 + 3, 3 + 4, 3 + 54 + 1, 4 + 2, 4 + 3, 4 + 55 + 1, 5 + 2, 5 + 36 + 1, 6 + 2, 6 + 3

Total number of combinations:

6 x 6 = 36.

Now, we need to find out how many of these combinations add up to at least 3.

We can ignore 1+1 because it's less than 3. The rest are as follows:

1 + 2, 2 + 1, 1 + 3, 3 + 1, 2 + 2, 1 + 4, 4 + 1, 2 + 3, 3 + 2, 1 + 5, 5 + 1, 2 + 4, 4 + 2, 3 + 3, 1 + 6, 6 + 1, 2 + 5, 5 + 2, 3 + 4, 4 + 3, 2 + 6, 6 + 2, 3 + 5, 5 + 3, 4 + 4, 3 + 6, 6 + 3, 4 + 5, 5 + 4, 4 + 6, 6 + 4, 5 + 5, 5 + 6, 6 + 5, 6 + 6.

Total: 30.

So, the probability of getting a sum of at least 3 when two different colored dice are rolled simultaneously is 30/36 or 5/6.

You can learn more about probability at

https://brainly.com/question/24756209

#SPJ11

The solution of the system of equations:

2x+2y+ 6z = 8

5x+6y + 5z = 3

5x + 6y + 3z = 5

Is the one in option a.

(x= 34, y = -27,z = -1)

Here we have the system of equations:

2x+2y+ 6z = 8

5x+6y + 5z = 3

5x + 6y + 3z = 5

If we subtract the third equation from the second one we will get:

(5x + 6y + 5z) - (5x + 6y + 3z) = 3 - 5

5z - 3z = -2

We just removed two of the variables, so we can now solve this linear equation for z so we get:

2z = -2

z = -2/2

z = -1

We know that the value of z is -1, that is enough to identify the correct option because only one of these has z = -1  which is the first one, so that is the correct option.

Laern more about systems of equations at.

https://brainly.com/question/13729904

#SPJ1

The statement is true.

The coefficient of correlation, also known as the Pearson correlation coefficient, is a measure of the strength and direction of the linear relationship between two variables. It ranges from -1 to 1, with a value of -1 indicating a perfect negative correlation, a value of 0 indicating no correlation, and a value of 1 indicating a perfect positive correlation.

The coefficient of correlation is useful in many applications, including research, business, and finance. It allows us to quantify how closely related two variables are, which is important when analyzing data and making predictions.

For example, in finance, the correlation coefficient can be used to measure the degree of correlation between the returns of two assets, which is important when building diversified portfolios. It is important to note, however, that the coefficient of correlation only measures the strength and direction of the linear relationship between two variables.

It does not indicate causation, nor does it capture any non-linear relationships that may exist between the variables. Therefore, it should be used in conjunction with other analytical tools to fully understand the nature of the relationship between the variables.

For more details about variables click here:

https://brainly.com/question/17344045#

#SPJ11

The probability that a patient will relapse after receiving desipramine depends on a variety of factors, such as dosage, duration of treatment, and pre-existing mental health conditions.

Generally speaking, it is estimated that around 50-70% of people who take desipramine as an antidepressant will experience relapse within six months of treatment cessation.

However, this rate can be decreased through longer treatment periods and/or higher doses of medication.

Additionally, patients may also benefit from lifestyle changes, such as increased physical activity, increased social engagement, and improved dietary habits.

Taking all of these factors into consideration, it is difficult to determine the exact probability of relapse in any given case.

To know more about antidepressant  click on below link:

https://brainly.com/question/14307922#

#SPJ11

The area of the piece of art is 448 square inches.

Shiloh made a scale drawing of a triangular piece of art.

Shiloh used a scale factor of 4 when making her drawing.

If the base and the height of Shiloh's drawing are 7 inches and 2 inches respectively,

what is the area of the piece of art?

Shiloh used a scale factor of 4 when making her drawing.

Therefore, the actual dimensions of the original triangular piece are four times the dimensions of the scaled drawing. Thus, the actual dimensions of the base and the height of the triangular piece are, respectively:

4 × 7 = 28 inches and 4 × 2 = 8 inches.

Using the formula for the area of a triangle,

we can find the area of the triangular piece.

The formula is given as A=12bh where b is the base and h is the height.

A = 12 × 28 × 8A = 112 × 4A = 448

Therefore, the area of the piece of art is 448 square inches.

For similar question on area.

https://brainly.com/question/25292087

#SPJ11

There are 107 multiples of 2 between 176 and 389.

The first multiple of 2 within the range is the smallest multiple of 2 that is greater than or equal to the lower endpoint, which is 176. To find this, we divide 176 by 2:

176 ÷ 2 = 88

So the first multiple of 2 within the range is 88.

The last multiple of 2 within the range is the largest multiple of 2 that is less than or equal to the upper endpoint, which is 389. To find this, we divide 389 by 2:

389 ÷ 2 = 194.5

Since we are only interested in whole numbers, we round 194.5 down to the nearest integer, which is 194.

So the last multiple of 2 within the range is 194.

Now that we know the first and last multiples of 2 within the range, we can count how many multiples of 2 exist between them. To do this, we subtract the first multiple from the last multiple and add 1:

194 - 88 + 1 = 107

Therefore, there are 107 multiples of 2 between 176 and 389.

To know more about multiples here

https://brainly.com/question/5992872

#SPJ4

Answer:

72 ft

Step-by-step explanation:

Alright so two ways you can solve this, but the easier one (imo) is to find the scale factor by doing 24/2 since its an enlargement, and multiplying 6 by the scale factor (12)

Answer: 900,012

Step-by-step explanation:

Answer: 900,012

this is because, nine hundred thousand is shown as 900,000 in number form

and then you just add 12 to that number, making it 900,012

The rate at which water is being poured into the conical paper cup when the water level is 4 cm is 707.1067 cm3 / 353.5534 seconds = 2 cm/sec.

The rate at which water is being poured into the conical paper cup with a height of 30 cm and a radius of 10 cm when the water level is 4 cm is determined by the volume of water that must be added to the cup in order to raise the water level from 0 cm to 4 cm. The volume of a cone is

V = (1/3)πr2h.

Therefore, the volume of water added to the cone when the water level is 4 cm is

V = (1/3)π × 102 × (30 - 4) = 707.1067 cm3.

Since the water level is rising at a rate of 2 cm/sec, it will take 707.1067 cm3 / 2 cm/sec = 353.5534 seconds to add the necessary water to the cup to raise the water level to 4 cm.

for such more question on rate

https://brainly.com/question/119866

#SPJ11

The weight of an object varies directly with the mass of the object therefore, the mass of the other object that weighs 15 N is 3 kg.

We can use the formula for direct variation, which states that if y varies directly with x, then y = kx, where k is the constant of variation. In this case, the weight y varies directly with the mass x, so we have:

y = kx

We are given that when x = 5 kg, y = 25 N. Substituting these values into the formula, we get:

25 = k(5)

Solving for k, we have:

k = 5

Now we can use this value of k to find the mass of another object that weighs 15 N. Let's call the mass of this object x2. We know that y2, the weight of the object, is 15 N. So we have:

15 = 5x2

Solving for x2, we have:

x2 = 3 kg

Therefore, the mass of the other object that weighs 15 N is 3 kg.

To learn more about mass Click here:
brainly.com/question/6199002

#SPJ4

Answer: I think It is 63.64%. If I'm wrong I'm sorry.

Step-by-step explanation:

Ask yourself what is 56% out of 88%. I did it in my head, but I got 63.6363636% then I rounded it to 63.64%.

From the given information provided, the area of the new hexagon when dilated by scale factor is 675 square inches.

When a polygon is dilated by a scale factor of k, its area is multiplied by k².

A hexagon is a six-sided polygon. It is a flat shape with straight sides, and all six of its angles add up to 720 degrees.

In this case, the hexagon is being dilated by a scale factor of 3, so the area of the new hexagon will be:

Area of new hexagon = (scale factor)² x Area of original hexagon

Area of new hexagon = 3² x 75

Area of new hexagon = 9 x 75

Area of new hexagon = 675 square inches

Therefore, the area of the new hexagon is 675 square inches.

Learn more about area here: brainly.com/question/25292087

#SPJ4

Answer:

To determine if Daniel should have filled out his W-4 form differently to receive a refund, we need to compare his tax liability with the total amount withheld from his paychecks for the year.

If Daniel's tax liability for the year is less than $3,900, he will receive a refund when he files his taxes. If his tax liability is more than $3,900, he will owe additional taxes when he files his taxes.

If Daniel's tax liability is exactly $3,900, he will neither owe additional taxes nor receive a refund when he files his taxes.

Therefore, to determine if Daniel should have filled out his W-4 form differently, we need to compare his tax liability with $3,900.

If Daniel's tax liability from part B, question 3, is less than $3,900, he will receive a refund when he files his taxes, as the total amount withheld from his paychecks is more than his tax liability. In this case, Daniel may want to consider filling out his W-4 form differently to reduce the amount withheld from his paychecks and increase his take-home pay.

On the other hand, if Daniel's tax liability from part B, question 3, is more than $3,900, he will owe additional taxes when he files his taxes, as the total amount withheld from his paychecks is less than his tax liability. In this case, Daniel may want to consider filling out his W-4 form differently to increase the amount withheld from his paychecks and reduce the amount he will owe when he files his taxes.

If Daniel's tax liability from part B, question 3, is exactly $3,900, he will neither owe additional taxes nor receive a refund when he files his taxes, and his W-4 form is correctly filled out for his tax situation.

In summary, whether or not Daniel should have filled out his W-4 form differently to receive a refund depends on his tax liability compared to the total amount withheld from his paychecks. If his tax liability is less than the total amount withheld, he may want to reduce the amount withheld to increase his take-home pay. If his tax liability is more than the total amount withheld, he may want to increase the amount withheld to reduce the amount he will owe when he files his taxes. If his tax liability is exactly equal to the total amount withheld, his W-4 form is correctly filled out for his tax situation.

One possible technique to address heteroscedasticity with group-specific variances is the use of weighted least squares (WLS) estimation, where observations from each group are assigned weights that are inversely proportional to the variance of the error term in that group.

Heteroscedasticity refers to the situation where the variance of the error term in a regression model is not constant across different levels of the independent variable(s). This violates the assumption of homoscedasticity, which can lead to biased and inefficient estimates of the model parameters.

When the heteroscedasticity is related to group-specific variances, a possible solution is to use WLS estimation. This involves calculating weights for each observation based on the inverse of the estimated variance of the error term in its group. By doing so, observations with larger variances are given smaller weights, while observations with smaller variances are given larger weights, which effectively downweighs the influence of more variable observations.

The resulting WLS estimator is more efficient and less biased than the standard OLS estimator, and it can lead to more accurate inferences about the relationship between the independent and dependent variables. However, WLS requires the researcher to specify the appropriate weights for each observation, which can be challenging and subjective in practice.

For more questions like Heteroskedasticity visit the link below:

https://brainly.com/question/30463266

#SPJ11

This means that the algorithm will end after just one step, and the GCD will be equal to the last non-zero remainder, which in this case is 3. Therefore, we can be certain that the Euclidean algorithm will end with a zero remainder in one step, and the lowest number we can be certain of is 3.

In this particular question, the student is asking how many steps are required for the Euclidean algorithm to end with a zero remainder when applying it to two positive integers a and b.Suppose you apply the Euclidean algorithm to two positive integers a, b. You only know that a is a number with 1000 decimal digits. The value of b, on the other hand, is given as 3. We can be certain that the Euclidean algorithm will end with a zero remainder in one step.

In order to understand why this is the case, it is important to know that the Euclidean algorithm is a method for computing the greatest common divisor (GCD) of two positive integers. It is based on the observation that the GCD of two numbers does not change if the smaller number is subtracted from the larger number repeatedly.The Euclidean algorithm begins by dividing the larger number by the smaller number and taking the remainder.

The larger number is then replaced with the smaller number, and the smaller number is replaced with the remainder. This process is repeated until the remainder is zero. At this point, the algorithm ends, and the GCD is equal to the last non-zero remainder that was computed.In the case of the student's question, we know that b=3. Since 3 is relatively prime to any number, including a number with 1000 decimal digits, the remainder of the first step will always be 0.

for such more questions on Euclidean algorithm

https://brainly.com/question/24836675

#SPJ11

The height of the second cylinder is 7 inches.

The Dreamy Donut Shop is 3 miles away from Cara's starting point.

For the first question, we can use the fact that the ratio of the diameter to the height is the same for both cylinders. The first cylinder has a diameter of 6 inches and a height of 14 inches, so its ratio is 6/14. If the second cylinder has the same ratio, then we can set up the equation

3/x = 6/14,

where x is the height of the second cylinder. Solving for x, we get

x = 7 inches.

Therefore, the height of the second cylinder is 7 inches.

For the second question, we can use the formula distance = rate × time. Since Cara drives at the same rate to both work and the donut shop, we can set up the equation

r × 0.5 = 15 for her commute to work, where r is her rate (in miles per minute). Solving for r, we get r = 30 miles per hour. Using the same formula for her trip to the donut shop, we get

r × 0.1 = d,

where d is the distance to the donut shop (in miles). Solving for d, we get

d = 3 miles.

Therefore, the Dreamy Donut Shop is 3 miles away from Cara's starting point.

Learn more about Cylinders:

https://brainly.com/question/23935577

#SPJ4

Answer:

The solutions to the equation x² = 196 are:

x = 14 or x = -14

Therefore, the smallest answer is -14 and the largest answer is 14.

X = -14 or 14

mark me and brainliest

Answer:

1440000

Step-by-step explanation:

Since for every mile, there are 12 people, we have 120000 miles. If we multiply 12 by 120000, we get 1440000.

In the following question, among the given options, The statement "In a meta-analysis, there is a manipulation of variables" is false. hence meaning that the rest of them are stated to be true.

In A meta-analysis is a statistical technique for synthesizing the findings of multiple studies. It involves combining the results from multiple studies, analyzing them, and presenting a summary of the overall evidence. It does not involve manipulating variables or performing a random assignment. In a meta-analysis, any amount of studies can be used, and researchers can look for gaps in the research, based on a statistical analysis.

For more such questions on meta-analysis

https://brainly.com/question/14723190

#SPJ11

The range of the function is a set of positive values greater than 500 and 60.

Therefore, the range of the function is given by:

Range = {c(t) : c(t) > 500, c(t) > 60t} or {c(t) : c(t) > 500, c(t) > 60}.

The given situation of a cell phone company charges $500 for a new phone and then $60 each month after the purchase.

If c (t) is a rational function that represents the average monthly cost of owning the cell phone, the range of the function is given by:

Range = {c(t) : c(t) > 500, c(t) > 60t} or {c(t) : c(t) > 500, c(t) > 60}

The cell phone company charges a one-time amount of $500 and $60 each month after the purchase.

It is given that c (t) represents the average monthly cost of owning the cell phone.

From this information, it can be inferred that the average monthly cost of owning the cell phone is given by: c(t) = (500 + 60t)/t

The given function is a rational function that represents the average monthly cost of owning the cell phone.

The range of a function is the set of all possible values of the function.

The average monthly cost of owning the cell phone is a positive value.

Hence the range of the function is a set of positive values greater than 500 and 60.

For similar question on function.

https://brainly.com/question/25638609

#SPJ11

Step-by-step explanation:

If your age is ' a ' then your max heart rate = 220 - a