Need help on this one

Answer:

Force of the ball against the bat

Explanation:

Newton's third law of motion states that for every action, there is an equal and opposite reaction. When a player hits a ball with a bat, the force the player exerted on the ball through the bat gave the ball a push force in the forward direction. This is an action force. Now that an action has been initiated, there must be a reaction according to Newton's third law of motion. The magnitude of the force on the ball equals the magnitude of the force on the bat. The direction of the force on the ball is opposite to the direction of the force on the ball. The ball will give the bat an equal and opposite force trying to push the bat backward by resisting the impact of the bat. This is the reaction. The ball will only move if the applied force is able to overcome the resisting force by the bat.

Where;

is the action force of the bat against the ball.

is the equal and opposite reaction force of the ball towards the ball.

Coach Carver has created a new team game for his students to play. It involves sprinting, tagging, and throwing a ball. Each team consists of 10 to 20 students. Which place is the safest to play the game

Answer:

Football Field

Explanation:

In sporting or gaming activities that involve sprinting, tagging, and throwing a ball. The safest place to play the game is "FOOTBALL FIELD"

This is because the football field is originally designed and created for footballing activities which are deemed spacious and free of danger. There is also evidence in the Olympic sporting activities.

Therefore, in this case, even though there is no option in the question, the correct answer is the Football field.

Answer:

True

Explanation:

Solids, Liquids, and Gases are all make up of atoms and molecules.

Answer:

The answer in 5m/s

Explanation:

You use the formula s=d devided by t, so in other words, you devide 45 meters by 9seconds and the answer is 5m/s

Answer:

I think it is the last option

Explanation:

Answer:

the sun

Explanation:

that is how the solar system works

The velocity the 5 Kg shot put would have, given the data from the question is 4 m/s

Momentum is defined as the product of mass and velocity. It is expressed as

Momentum = mass × velocity

We'll begin by calculating the momentum of the 1 Kg ball. This can be obatined as follow:

Momentum = mass × velocity

Momentum = 1 × 20

Momentum = 20 Kg.m/s

Momentum = mass × velocity

20 = 5 × velocity

Divide both sides by 5

Velocity = 20 / 5

Velocity of 5 Kg = 4 m/s

Thus, the 5 Kg shot put will have a velocity of 4 m/s

Learn more about momentum:

https://brainly.com/question/250648

#SPJ1

Answer:

3. There would be no sound.

Explanation:

Sound is produced by vibrations that travel through a medium, most commonly through air.

If there is no matter to vibrate (such as in the vacuum of space) then there's no way for a sound wave to be produced.

Thus the answer is option 3. There would be no sound.

Answer:

the answer is dielectric

hope helps you

Explanation:

Answer:

dielectric

Explanation:

edge

Answer:

The person delivered a power of 2,558 Watt

Explanation:

Work and Power

Mechanical work is the amount of energy transferred by a force. It's a scalar quantity, with SI units of joules.

Being  the force vector and  the displacement vector, the work is calculated as:

[tex]W=\vec F\cdot \vec s[/tex]

If both the force and displacement are parallel, then we can use the equivalent scalar formula:

W=F.s

Power is the amount of energy transferred per unit of time. In the SI, the unit of power is the watt, equivalent to one joule per second.

The power can be calculated as:

[tex]\displaystyle P=\frac {W}{t}[/tex]

Where W is the work and t is the time.

If the person lifts a mass of m=200 Kg, then exerts a force equal to its weight:

F = m.g = 200*9.8 = 1,960

F = 1,960 N

The work done when lifting the weight 7 times by a distance of s=2.2 m is:

W = 7*1,960*2.2=30,184

W = 30,184 J

Finally, the power delivered in t=11.8 seconds is:

[tex]\displaystyle P=\frac {30,184}{11.8}[/tex]

P = 2,558 Watt

The person delivered a power of 2,558 Watt

Hence , musical instrument such as a piano may be tuned by using the phenomenon of beats.

A musician typically uses the development of beat frequency to tune their piano. They pluck one string of the piano and faucet a implement at the same time. If the 2 sound sources turn out completely different beats, their frequencies will not be identical, and that they are aforementioned to be out of tune. The musician can modify the string's tension and repeatedly repeat the above mentioned method till the beats cannot be distinguished, that means the frequencies are identical. they're aforementioned to be in tune.

This methodology can work a lot of expeditiously for associate degree instrument entirely out of tune as a result of it'll be easier to differentiate the beats of the instruments and also the implement.

Learn more about beat frequency here :

https://brainly.com/question/14157895

#SPJ4

This is the schematic of a circuit where there are two capacitors in parallel with each other, and in series with the battery, switch, and resistor.

A resistor is a two-terminal electrical component that produces electrical resistance in circuits. In electrical circuits, resistors can limit current flow, regulate signal levels, divide voltages, bias active components, and terminate transmission lines, among other functions. High-power resistors can be used as test loads for motor controllers, power distribution systems, and generators because they can produce many watts of heat instead of electrical energy. Only sporadically can variations in operating voltage, period of operation, or temperature affect the resistance of fixed resistors. Variable resistors can be used as humidity sensors, chemical activity sensors, force sensors, heat sensors, light sensors, volume controls, lamp dimmers, and light sensors. Resistors are frequently used in both electrical networks and technological gadgets.

To learn more about resistor ,visit:

https://brainly.com/question/17390255

#SPJ4

No, Gauss’s law of charge distribution in electric field only applies to specified charge distribution. Hence, it cannot be used to find the electric field if the total charge inside a closed surface is known but. the distribution of the charge is unspecified

The electric flux is defined as the electric field multiplied by the area of the surface in a plane perpendicular to the field. Another interpretation of Gauss' rule holds that the net flow of an electric field across a particular surface divided by the contained charge should equal a constant. Gauss' law is only applicable to continuous charge distribution. In such instance, we may calculate the total electric field across the surface. However, we cannot use Gauss' law to calculate the electric field of charge with an uncertain distribution.

To understand more about Gauss law in relation to magnitude and distribution of charges charges inside closed surface, click https://brainly.com/question/16735321

#SPJ4

59.00 m is the calculated distance.

Distance is the sum of an object's movements, regardless of direction. Distance can be defined as the amount of space an object has covered, regardless of its starting or ending position. The International System of Units defines a meter as the distance unit. It's interesting to note that many other derived units or quantities, such as volume, area, acceleration, and speed, may be constructed using this as the basic unit and a few formulae.

V = V₀ + at = 4.30 + 3.00*5.00 = 19.30 m/s

d = V₀t + (1/2) at²

= 4.30*5.00 + (1/5.00) ² = 59.00 m

or

d = (1/2) (V₀+V) t

= (1/2) (4.30+19.30) (5.00)

= 59.00 m

Learn more about distance here-

https://brainly.com/question/15172156

#SPJ9

Given that,

The radius of a flywheel, r = 20 cm = 0.2 m

The centripetal acceleration experienced on the edge of the flywheel = 900 cm/s² = 9 m/s²

To find,

The speed of a point on the edge.

Solution,

The formula for the centripetal acceleration is given by :

[tex]a=\dfrac{v^2}{r}\\\\v=\sqrt{ar} \\\\v=\sqrt{9\times 0.2} \\\\=1.34\ m/s[/tex]

Hence, the required speed is 1.34 m/s

The speed of a point on the edge of  the flywheel is 134.16cm/s

The formula for calculating the centripetal acceleration of the flywheel is expressed as:

[tex]a=\frac{v^2}{r}[/tex]

where;

v is the speed of the flywheel

r is the radius of the wheel

Given the following parameters

r = 20.0cm

a = 900cm/s²

Substituting the given parameters into the formula above;

[tex]900=\frac{v^2}{20}\\v^2=900\times 20\\v^2=18,000\\v=\sqrt{18,000}\\v= 134.16cm/s[/tex]

Hence the speed of a point on the edge of  the flywheel is 134.16cm/s

Learn more here: https://brainly.com/question/1268866

Answer:

Wouldn’t his or hers speed be 10m?

Explanation:

because 60 divided by 6 = 10

so 10m per second?

Answer:

Look below!

Explanation:

1) Observation

2) Hypothesis

3) Results

4) Experiment

5) Problem

6) Conclusion

7) Inference

Answer:

Evidence

Explanation:

   The value of the acceleration of the earth toward it when it accelerates toward the earth with 9.8m/s² is a = 7.35×10-²³m/s².

   Forces are the definition of Newton's second law, which is stated under the relation:

∑ Force = mass × acceleration.

  In other words, force is the origin of motion since it generates acceleration in a system.

   In this case we must complete the statement:

"A student with mass 45 kg jumps off a high diving board. Using 6. 0×1024 kg for the mass of the earth, what is the acceleration of the earth toward her as she accelerates toward the earth with an acceleration of 9. 8 m/s2 ? assume that the net force on the earth is the force of gravity she exerts on it."

  We determine the Force of the student:

F = ma

F = 45kg * 9.8m/s².

F = 441N

  Now we go to the acceleration of the earth:

a = F/m

a = 441N / 6×10²⁴ Kg

a = 7.35×10-²³m/s².

Learn more about Forces in:

https://brainly.com/question/11539787

#SPJ4

As per the question, a pump uses a piston of 15 cm diameter that moves at 2.0 cm/s as it pushes fluid through a pipe. The speed of the fluid when it enters a portion of the pipe that is 3.0 mm in diameter is 5000cm/sec.

The volumetric flow rate refers back to the three-dimensional area occupied by using fluid flowing thru a move section according to time. it's far the ratio of the change within the volume of a flowing fluid to the alternate in time.

According to the question, the volumetric flow rate in the pump and the pipe is the same.

Q = AV

Q = Volumetric flow rate

A = Cross-sectional area

V = Velocity

Q ( pump ) = ( π * 15^2 ) / 4 * 2 = 353.43 cm^3/sec

Q ( pipe ) =  ( π * ( 3/10 )^2 ) / 4 * V = 0.071V

Q ( pump ) = Q ( pipe )

Therefore  0.071V = 353.43

Velocity (V) = 5000 cm/sec

Therefore the speed of the fluid when it enters the pipe is 5000 cm/sec.

Velocity is the directional pace of an object in movement as a demonstration of its rate of change in function as determined from a specific body of reference and as measured by way of a selected standard of time.

Learn more about Velocity here brainly.com/question/500702  

#SPJ4

Answer:

F = 16 N

Explanation:

Given that,

Mass of the ball, m = 7 kg

Speed of the ball in circular motion, v = 3 m/s

The radius of the string, r = 4 m

We need to find the centripetal force of a ball on a string in circular motion. The formula for the centripetal force is given by :

[tex]F=\dfrac{mv^2}{r}[/tex]

Putting all the values in the above formula

[tex]F=\dfrac{7\times (3)^2}{4}\\\\=15.75\ N[/tex]

or

F = 16 N

Hence, the correct option is (c).

Answer:

300

Explanation:

When the direction of one current is reversed and doubled, the force will be doubled.

The force between two parallel currents I₁ and I₂ that are spaced apart by r is measured as the ratio F/L. If the currents are flowing in the same direction, the force is attracting; if not, it is repulsive.

With a distance of 4.00 cm between them, two parallel wires repel one another with a force of 2.00 × 10⁻⁴ N/m. One wire is carrying 5.00 A of current.

I₁ = 5 A

d = 4 cm

F = 2 × 10⁻⁴ N/m

We have, [tex]\frac{F}{L}=\frac{\mu_{0} I_{1}I_{2}}{L}[/tex]

Now, we know the force is directly proportional to the product of the current, and the direction of one current is reversed and doubled.

The force of interaction would become attractive and its magnitude would double as a result of switching the directions of either of the currents and doubling their size.

Learn more about force here:

https://brainly.com/question/12970081

#SPJ4

Answer:

erosion

Explanation:

grows into the eirth each year. the atmosphere and how the worldchanges every year

The net electric flux in such gaussian surface is zero.

In a uniform electric field existing in a region of space and contains no charge, it is impossible for there to be an electric flux in such space. This is because flux generated in an electric field is a product of the charge and the permittivity of the free space.

In other words, every field line sent into a given closed surface continues through the interior and is typically directed outward somewhere on the surface if there is no provided net charge there. The net or total electric flux is zero because the negative flux barely equals the positive flux in magnitude.

To learn more about electric flux through a gaussian surface. Click, https://brainly.com/question/14834262

#SPJ4

(1) The height reached by cat A is 2.5 m.

(2) The speed of cat A before it hits the ground is 36.4 m/s.

(3) The speed of cat B before it hits the ground is 22.39 m/s.

(4) The time spent in air by cat A than cat B is 1.43 seconds.

The time of motion of cat A is calculated as follows;

h = vt - ¹/₂gt

-23 = 7t - 4.9t²

4.9t² - 7t - 23 = 0

solve the quadratic equation using formula method;

a = 4.9, b = -7, c = - 23

t = 3.0 seconds

The time of motion of cat B is calculated as follows;

h = vt - ¹/₂gt

23 = 7t + 4.9t²

4.9t² + 7t - 23 = 0

solve the quadratic equation using formula method;

a = 4.9, b = 7, c = -23

t = 1.57 seconds

h = u²/2g

h = (7²)/(2 x 9.8)

h = 2.5 m

v = u + gt

v = 7  + 3(9.8)

v = 36.4 m/s

v = u + gt

v = 7  + 1.57(9.8)

v = 22.39 m/s

Time difference = 3 s - 1.57 s = 1.43 seconds

Thus, the height reached by cat A is 2.5 m.

The speed of cat A before it hits the ground is 36.4 m/s.

The speed of cat B before it hits the ground is 22.39 m/s.

The time spent in air by cat A than cat B is 1.43 seconds.

Learn more about time of motion here: https://brainly.com/question/24739297

#SPJ1

Answer:

Many forms of energy exist, but they all fall into two basic categories:

Explanation:

Thermal energy is due to the movement, and the kinetic energy associated with this movement, of molecules that make up an object or substance.

Hoped I helped U!! ❤️

Answer:

1.) mechanical energy and 2.) potential energy

Explanation:

Sound is made up of vibrations thermal energy consists of moving molecules in air or in an object, and mechanical energy is the combination of kinetic and potential energy of a moving object.

I hope this helps!!!!

Answer:

B. chemical equation.

Explanation:

This explained to be a short method of representing different symbols and structures that are seen to make up a chemical reaction. It is known to have been formulated by a French chemist Jean Beguin. In a course of writing a chemical reaction, its reaction is seen to show a starting compound which is been written on the left hand side of the said equation while the product is written by the right hand side and are separated in different directions by an arrow. When this is done, charges on this equation that is balanced is also written on each side of the equation.

Hello!

He will miss it by ≈ 0.852 m

Begin by finding the amount of time necessary to hit the target. Use the formula t = d / s:

t = 75 / 180 = 0.4167 sec

Use the equation d = vi + 1/2at² to solve for the amount the bullet will miss the target. (vi is 0 in this instance). We are solving for the vertical component, so use a  = 9.81 m/s (gravity).

d = 0 + 1/2(9.81)(0.4167²)

d ≈ 0.852 m

Answer:

D By looking all the way to the cosmological horizon, we can see the actual conditions that prevailed all the way back to the first instant of the Big Bang.

Explanation:

Astrophysicists are able to determine the conditions that existed in the early universe, by using instruments such as telescopes to observe and study cosmic horizons. More ideas about the early universe can be found from the thermal light present in cosmic backgrounds.

Scientists study these details that provide an insight into the conditions that existed so many years ago. They have been able to determine that the Big Bang involved so many collisions from these observations.