1.4 x 1023 molecules are present in 2.3 moles of oxygen.
How many molecules will be in the 2.3 moles of oxygen?We know that if we multiply the 2.3 moles of oxygen with Avogadro's number which is 6.023 x 1023 then this will give us the number of molecules which is present in the 2.3 moles of oxygen and which is 13.85 x 1023.
Mole is a standard scientific unit for measuring large quantities of very small entities like atoms, molecules, or other specific particles. The mole entitles an extremely large number of units about 6.02214076 × 1023.
So we can conclude that by multiplying Avogadro's number with the 2.3 moles of oxygen then it will give us 1.4 x 1023 molecules.
Learn more about Molecules here: https://brainly.com/question/26044300
#SPJ1
How many Liters of a 4.5 M HCL solution can be prepared by using 250.0 mL of a 12.0 M HCl solution?
Answer:
0.667 L
Explanation:
From the question given above, the following data were obtained:
Initial volume (V₁) = 250 mL
Initial concentration (C₁) = 12 M
Final concentration (C₂) = 4.5 M
Final volume (V₂) =?
The final volume of the solution can be obtained by using the dilution formula as illustrated below:
C₁V₁ = C₂V₂
12 × 250 = 4.5 × V₂
3000 = 4.5 × V₂
Divide both side by 4.5
V₂ = 3000 / 4.5
V₂ = 667 mL
Finally, we shall convert 667 mL to L. This can be obtained as follow:
1000 mL = 1 L
Therefore,
667 mL = 667 mL × 1 L / 1000 mL
667 mL = 0.667 L
Thus, the volume of the solution prepared is 0.667 L
word equation for k2co3->k2o+co2
Answer:
potassium carbonate -> potassium oxide + carbon dioxide
Explanation:
remember to look at your periodic table, located each element so in this case you would locate k,c and o which are potassium, carbon and oxygen. From there you use nomenclature rules to get your answer.
Compound composed of sulfur and fluorine is found to contain 45.77% by mass of sulfur is the molar mass of the compound is 140.12 g per mole what is its molecular formula
Answer: Molecular formula is S2F4
Explanation: Assume mass of sample is 100 g.
Then mass of S is 45.77 g and amount of substance is
n = m/M = 45.77 g / 32.07 g/mol = 1.427 mol
MAss of F is 54.23 g and n = 54.23 g / 19 g/mol = 2.854
n(S( : n(F) = 1.427 : 2.854 | : 1.427 gives proportion
n(S) : n(F) = 1:2 , empirical formula is also (SF2)x
Now M(SF2) = 32.07 + 2·19 = 70.07 g/mol
x = 140.12 / 70.07 = 2
When a person weighs himself in pounds, which system of measurement is he using?
Answers: customary or metric
Answer:
it is the British imperial and united states customary systems
List all the metals in the alkaline earth metals group
Answer:
beryllium (Be), magnesium (Mg), calcium (Ca), strontium (Sr), barium (Ba), and radium (Ra).
Alkaline earth metals are those that have two valence electrons in their outermost shell.
Barium (Ba), Radium (Ra), Strontium (Sr), Magnesium (Mg), Calcium (Ca), and Beryllium (Be) are the six alkaline earth metals.
By donating their outermost electrons, they take on the noble gas electron configuration, which increases their stability. When electrons are transferred to an atom with an electronegative charge, the alkaline earth metals get a positive charge.
The second column of the periodic table contains alkaline earth metals, which are very reactive metals. These metals are the building blocks of the entire world. These metals are typically found as sulfates in nature.
A few examples of minerals are gypsum, calcium sulfate, epsomite, magnesium sulfate, barite, and barium sulfate.
to learn more about "Alkaline earth metals" here:
brainly.com/question/27786158
Use the data in the table below to calculate the heat of vaporization (AHvap) in kJ/mol of pinene.
Vapor Pressure
(torr)
760
515
340
218
135
Temperature
(K)
429
415
401
387
373
kJ/mol
Use the value of AHyap determined in Part 1 to calculate the vapor pressure of pinene (in torr) at room temperature (23°C)
760
torr
Answer:
41 kJ/mol4 torrExplanation:
Given pinene has a (temperature, vapor pressure) relation (K, torr) = {(373, 135), (429, 760)}, you want the heat of vaporization in kJ/mol and the vapor pressure at room temperature (23 °C).
Clausius–Clapeyron EquationThe Clausius–Clapeyron equation can be used to find the heat of vaporization:
[tex]\ln{P}=-\dfrac{\Delta H_{\text{vap}}}{R}\left(\dfrac{1}{T}\right)+C[/tex]
Solving for ∆H, we find ...
[tex]\Delta H_{\text{vap}}=-\dfrac{R\cdot\ln{\dfrac{P_1}{P_2}}}{\dfrac{1}{T_1}-\dfrac{1}{T_2}}\\\\\\\Delta H_{\text{vap}}=-\dfrac{8.314\cdot\ln{\dfrac{760}{135}}}{\dfrac{1}{429}-\dfrac{1}{373}}\approx 41052.8[/tex]
The heat of vaporization of pinene is about 41 kJ/mol.
Vapor pressureRearranging the above equation to give P1, we have ...
[tex]\ln{\dfrac{P_1}{P_2}}=-\dfrac{\Delta H_\text{vap}}{R}\left(\dfrac{1}{T_1}-\dfrac{1}{T_2}\right) \\\\\\P_1=P_2\cdot e^{-\frac{\Delta H_\text{vap}}{R}\left(T_1^{-1}-T_2^{-1})}[/tex]
Using the same P2 and T2 as above, we find the vapor pressure at room temperature (296.15 K) to be ...
P1 ≈ 4.349 . . . . . torr
The vapor pressure of pinene at room temperature is about 4 torr.
When the conductivity is at a minimum, what must be true about the amount of Ba(OH)2?
When the conductivity is at a minimum, the true thing about the amount of Ba(OH)₂ is that the amount of the two reactants are the same when conductivity is low.
What is conductivity?The ability of an aqueous solution to carry an electric current is measured by its conductivity. Ionic strength is measured by conductivity monitors. In automated chromatography systems, conductivity is the main input control parameter used to enable the generation of salt gradients or to control buffer dilution or in-line buffer preparation.
Conductivity monitors can be used to automate and monitor cleaning and equilibration procedures. It's important to remember that temperature affects measurements of conductivity and pH.
When conductivity is low, the amounts of the two reactants are equal. Between the reactants, there are no excesses. The aqueous solution cannot dissolve the precipitate BaSO₄. Since there are no ions, the conductivity is at its lowest.
Learn more about conductivity on:
https://brainly.com/question/1851658
#SPJ1
Complete question
The Ba(OH)₂ dissociates as Ba+2 + 2 OH-. H₂SO₄ dissociates as 2 H+ + SO₄-2. When the conductivity is at a minimum, what must be true about the amount of Ba(OH)₂ compared to H₂SO₄
A gas occupies 400.0 mL at 20.00 C and 70.00 kPa. What will the pressure be at 40.00 C and 200.0 mL ?
Answer: The new pressure is 280 kPa.
Explanation:
Given: [tex]V_{1}[/tex] = 400.0 mL, [tex]T_{1} = 20^{o}C[/tex] , [tex]P_{1}[/tex] = 70.0 kPa
[tex]V_{2}[/tex] = 200.0 mL, [tex]T_{2} = 40.0^{o}C[/tex], [tex]P_{2}[/tex] = ?
Now, combined gas law is used to calculate the new pressure as follows.
[tex]\frac{P_{1}V_{1}}{T_{1}} = \frac{P_{2}V_{2}}{T_{2}}[/tex]
Substitute the values into above formula as follows.
[tex]\frac{P_{1}V_{1}}{T_{1}} = \frac{P_{2}V_{2}}{T_{2}}\\\frac{70.0 kPa \times 400.0 mL}{20^{o}C} = \frac{P_{2} \times 200.0 mL}{40.0^{o}C}\\P_{2} = 280 kPa[/tex]
Thus, we can conclude that the new pressure is 280 kPa.
Form a group and discuss the possible reasons why EA, is a positive quantity for oxygen atom.
Answer:
Possible reasons why EA, or electronegativity, is a positive quantity for oxygen atom include:
Explanation:
Nitrogen monoxide and oxygen can be formed from the thermal decomposition of nitrogen dioxide.
2NO2 (g) = 2NO (g) + O₂(g)
In an experiment, 4 moles of nitrogen dioxide were put into a 1.0 dm³ container and heated
to a constant temperature. The equilibrium mixture contains 0.8 moles of oxygen.
What is the value of the equilibrium constant, Kc?
1.5 POINTS
A
C
E
LU
0.032
0.853
0.426
B
D
0.222
0.356
FINISH QUIZ
Answer:
0.355 moldm^-3
Explanation:
Calculate the pH if the [OH-] concentration is 5.9x10-1 M.
student titrated 15.00 mL of HCl of an unknown concentration with a solution of 0.0670 M NaOH. This titration used 19.06 mL of the 0.0670 M NaOH to reach the end point. Determine the concentration of the unknown HCl in one set up. You may look at the steps used in the previous problem to recall what fractions need to be in the set-up to solve this problem. 1. Fill in the fractions required to determine the concentration of HCl.
Answer:
The concentration of the unknown HCl is 0.0851 M.
Explanation:
The equation of neutralization:
[tex]n_1M_1V_1=n_2M_2V_2[/tex]
Where:
[tex]n_1[/tex]= Basicity of acid
[tex]n_2[/tex] = Acidity of base
[tex]M_1[/tex]= concentration of acid
[tex]M_2[/tex]= concentration of base
[tex]V_1[/tex] = Volume of acid used in neutralization
[tex]V_2[/tex] = Volume of base used in neutralization
We have:
The acidity of HCl = [tex]n_1=1[/tex]
The concentration of HCl solution used = [tex]M_1=?[/tex]
The volume of HCl used in titration =[tex]V_1= 15.00 mL[/tex]
The acidity of NaOH =[tex]n_2=1[/tex]
The concentration of NaOH solution used = [tex]M_2=0.0670 M[/tex]
The volume of NaOH used in titration =[tex]V_2= 19.06 mL[/tex]
[tex]n_1M_1V_1=n_2M_2V_2\\1\times M_1\times 15.00 mL=1\times 0.0670 M\times 19.06 mL\\M_1=\frac{1\times 0.0670 M\times 19.06 mL}{1\tines 15.00 mL}\\M_1=0.085135 M\approx 0.0851 M[/tex]
The concentration of the unknown HCl is 0.0851 M.
sap can be turned into syrup by
Answer: by boiling it
Explanation:
By boiling the sap to remove water, also to concentrate the sugar that makes maple syrup.
An object has a mass of 0.0124 kg and a volume of 1893 mm^3. What is its density in grams per cubic centimeter?
Answer:
[tex]d=6.34g/cm^3[/tex]
Explanation:
Hello there!
In this case, since the calculation of density is performed by dividing the mass over volume:
[tex]d=\frac{m}{V}[/tex]
Which gives us a better understanding of the degree of compactness of the object; we can find the required density in grams per cubic centimeter by applying the following dimensional analysis in the aforementioned equation:
[tex]d=\frac{0.0124kg}{1893mm^3} *(\frac{10mm}{1cm} )^3*\frac{1000g}{1kg}\\\\d=6.34g/cm^3[/tex]
Regards!
Which of these is an example of a physical property?
A. Iron combines with oxygen to rust.
B. Potassium reacts in water to form a base.
C. Sodium metal is soft and malleable.
D. Sodium ignites when placed in water.
Option C. Sodium metal is soft and malleable is an example of a physical property.
What is a physical property?A physical property can be defined as any feature of a substance that can be really observed and also measured without changing its chemical composition such as for example, the color, density of a metal, boiling point, conductivity, etc.
Therefore, with this data, we can see that physical properties have a significant impact on the performance and use of a given chemical product and they are associated with intrinsic features of the chemical material that forms molecules.
Learn more about physical properties here:
https://brainly.com/question/12330204
#SPJ1
What can be added to a solution to control the pH?
a base
a liquid
a buffer
an acid
Answer:
liquid
Explanation:
Adjusting pH in Water
Pure or distilled water has a pH level of 7, which means it is neutral. If you want to increase the pH of water, you must add an alkaline substance, such as baking powder, to it. If you want to decrease the pH of water, you add an acidic substance, such as lemon juice, to it
A buffer can be added to a solution to control the pH. The correct option is c.
What is pH?PH is potential hydrogen. It is the value of how acidic or alkaline, the solution is.
The pH scale is consisting of 1 to 14 measure numbers, a pH less than 7 is acidic and a pH more than 7 is basic.
A buffer is a solution that maintains the pH of any solution.
Thus, the correct option is C, a buffer.
Learn more about pH
https://brainly.com/question/491373
Draw the Lewis structure (including resonance structures) for methyl azide (CH3N3). For each resonance structure, assign formal charges to all atoms that have formal charge. Draw the Lewis structure (including resonance structures) for methyl azide (CH3N3). For each resonance structure, assign formal charges to all atoms that have formal charge.
Answer:
N atom ( bounded to two Nitrogen atoms ) has a + formal charge while the N atom bounded to only one (1) Nitrogen atom has a - formal charge .
Explanation:
Diagram Lewis structure of methyl azide ( attached below )
Generally CH3N3 has two(2) resonance structures
What is found in both structures is that the N atom ( bounded to two Nitrogen atoms ) has a + formal charge while the N atom bounded to only one (1) Nitrogen atom has a - formal charge .
Attached below are the two resonance structures
CHEMISTRY FORM THREE Exercise 2.1 1) Not all metals share the typical metal properties.name a metal that is: a. hard and strong b. malleable at room temperature
a) The strongest metal on the planet is tungsten.
When it comes to tensile strength, tungsten tops all other metals. One of the strongest metals known to man, tungsten has an ultimate strength of 1510 Megapascals.
In addition to having the greatest melting point of any unalloyed metal, tungsten boasts greater strength. Tungsten is frequently employed in electrical and military applications due to its strength.
Tin is a malleable, silvery-white metal that is highly flammable at ambient temperature.
Metal malleability is a complex subject. There is no objective test available to measure this feature, as we previously stated. We most frequently test it for hardness.
The most malleable and ductile metals are gold and silver. Pure gold and silver are too soft to be used to create items that will keep their shape.
Metals may be molded into different shapes, such as thin sheets or foils, without breaking or shattering because they are malleable. They are also ductile, making it simple to draw them into wires.
To learn more about metals from given link
https://brainly.com/question/4701542
#SPJ1
as a sample of water is heated, the kinetic energy of its molecules increases then, the energy is used to overcome the attractions between the molecules so that they are no longer help close together. Which sections of the heating curve illustrate this process
The sections of the heating curve illustrate this process Section A followed by B. Therefore, option D is correct.
What is the heating curve ?The term heating curve is defined as the graphical representation of the correlation between heat input and the temperature of a substance.
At section, A solid Ice at temperature 0°C can heat for about 10 mins and all the energy generated from heating up the ice is used to split the bonds which binds the ice together as a solid.
At Section, B the liquid water at 100°C covert to vapor because the heat energy required here split the bond between the water molecules then they are move in random directions as vapor.
Thus, option D is correct.
To learn more about the heating curve, follow the link;
https://brainly.com/question/10481356
#SPJ1
Your question is incomplete, probably your question was
As a sample of water is heated, the energy is used to overcome the attractions between the molecules so that they are no longer held close together and can move in random directions. Then, the kinetic energy of its molecules increases. Which sections of the heating curve illustrate this process?
As a sample of water is heated, the energy is - 1
Image is attach below
What is also known as neutralization? 1. Acid-base 2. Redox 3. Precipitation
Answer:
acid base
Explanation:
plz mark me brainliest
What volume of solution must be added to 4.0 mol of NaCl to make a 1.2 M solution?
Answer:
[tex]\boxed {\boxed {\sf 3.3 \ liters}}}[/tex]
Explanation:
Molarity is a measure of concentration in moles per liter.
[tex]molarity=\frac{moles \ of \ solute}{liters \ of \ solution}}[/tex]
The solution has a molarity of 1.2 M or 1.2 moles per liter. There are 4.0 moles of NaCl, the solute. We don't know the liters of solution, so we can use x.
molarity= 1.2 mol/L moles of solute= 4.0 mol liters of solution =xSubstitute the values into the formula.
[tex]1.2 \ mol/L = \frac{4.0 \ mol}{x}[/tex]
Since we are solving for x, we must isolate the variable. Begin by cross multiply (multiply the 1st numerator and 2nd denominator, then the 1st denominator and 2nd numerator.
[tex]\frac {1.2 \ mol/L}{1}=\frac{ 4.0 \ mol}{x}[/tex]
[tex]4.0 \ mol *1=1.2 \ mol/L *x[/tex]
[tex]4.0 \ mol = 1.2 \ mol/L *x[/tex]
x is being multiplied by 1.2 moles per liter. The inverse of multiplication is division, so divide both sides by 1.2 mol/L
[tex]\frac{4.0 \ mol}{1.2 \ mol/L} = \frac{1.2 \ mol/L *x}{1.2 \ mol/L}[/tex]
[tex]\frac{4.0 \ mol}{1.2 \ mol/L}=x[/tex]
The units of moles (mol) will cancel.
[tex]\frac{4.0 }{1.2 } \ L =x[/tex]
[tex]3.33333333 \ L=x[/tex]
The original measurements both have 2 significant figures, so our answer must have the same. For the number we found, this is the tenths place.
The 3 in the hundredth place tells us to leave the 3 in the tenths place.
[tex]3.3 \ L\approx x[/tex]
Approximately 3.3 liters of solution are needed to make a 1.2 M solution with 4.0 moles of sodium chloride.
Which of the following statements describes all
exothermic reactions?
A. Exothermic reactions form gases.
B. Exothermic reactions require a catalyst.
C. The energy of the reactants is lower than the
energy of the products,
D. The energy of the reactants is higher than the
energy of the products.
Answer:
D
Explanation:
The energy of the reactants is higher than the energy of the products.
What does the red line running through Earth represent?
Answer: The Equator because it divides the Earth into the Northern and Southern hemispheres.
Explanation:
Carbon disulfide is a colorless, volatile, highly flammable liquid with a very unpleasant smell that is used as a solvent in some laboratory applications.
a. True
b. False
What is the name of the charge that orbits the nucleus called?
Answer:
Electrons
Explanation:
"An electron is a negatively charged particle that orbits the nucleus of an atom."
"Electrons are negatively charged particles arranged in orbits around the nucleus of an atom"
What is the volume of 3.00 M sulfuric aid that contain 9.809 g of H2SO4 (98.09g/mol)
Given :
Molarity of sulfuric acid solution is 3.0 M.
Amount of sulfuric acid present in solution is 9.809 g.
To Find :
The volume of solution.
Solution :
We know, molarity is given by :
[tex]Molarity = \dfrac{number \ of \ moles \times 1000}{Volume\ ( ml )}\\\\M = \dfrac{w \times 1000}{M.M \times V}\\\\3 = \dfrac{9.809\times 1000}{98.09 \times V}\\\\V = \dfrac{1000}{10\times 3}\ ml\\\\V = 33.33 \ ml[/tex]
Therefore, volume required is 33.33 ml .
How many moles of C6H12O6 are needed to produce 38.44 grams of CO2? Round your answer to three digits after the decimal point.
C6H12O6 + 6 O2 à 6 CO2 + 6 H2O
Explanation:
38.44 g CO2 = 0.873 mol CO2
0.873 mol CO2 × (1 mol C6H12O6 / 6 mol CO2)
= 0.146 mol C6H12O6 x (180.56 g C6H12O6/ 1 mol C6H12O6)
= 26.303 gm
Please i need help with this it is Which of the following is not a property of matter that you could use to distinguish one substance from another.
Answer:
I believe it's mass? I may be wrong though...
PLS HELP DUE NOW
What is the pH of each solution?
[H3O+] = 4.78 x 10-2 M
and
pOH = 4.56
Answer:
First solution pH = 1.32
Second solution pH = 9.44
Explanation:
For the first solution:
[H₃O⁺] = 4.78 x 10⁻² MWhich is the same as saying 4.78 x 10⁻² M is [H⁺].
Knowing [H⁺], we can now calculate the pH:
pH = -log[H⁺]pH = 1.32As for the second solution, we can calculate the pH by keeping in mind the relationship between pOH and pH:
pOH + pH = 144.56 + pH = 14pH = 9.44Without doing a calculation, arrange the following group of molecules in order of decreasing standard molar entropy (S^o ):
hexane (C6H14), benzene (C6H6), cyclohexane (C6H12)
a. C6H14 > C6H6 > C6H12
b. C6H6 > C6H12 > C6H14
c. C6H12 > C6H14 > C6H6
d. C6H14 > C6H12 > C6H6
e. C6H12 > C6H6 > C6H14
f. C6H6 > C6H14 > C6H12
Answer:
d. C6H14 > C6H12 > C6H6
Explanation:
Standard molar entropy has to do with the number of atoms that are present in each of the species. The greater the number of atoms possessed by the species, the higher the value of the standard molar entropy due to a greater number of vibration modes.
Hexane (C6H14) has the highest number of atoms followed by cyclohexane (C6H12) and lastly benzene (C6H6).
Thus the order of decreasing molar entropy is; C6H14 > C6H12 > C6H6.