Need answers asap!!! Pls and thank you!

Need Answers Asap!!! Pls And Thank You!

Answers

Answer 1

Answer:

1) 0,11 A

2) 224 V

3) I added a photo of my drawing

4) 8,34 Ω

5) 0,94 A

6) 0,35 A

7) 0,94 A

Explanation:

1) Given:

R = 80 Ω

V = 9V

Find: I - ?

[tex]i = \frac{v}{r} = \frac{9}{80} ≈ 0.11[/tex]

.

2) Given:

I = 2 A

R1 = 100 Ω

R2 = 12 Ω

Find: V - ?

This circuit is connected in series

R = R1 + R2

R = 100 + 12 = 112 Ω

V = I × R

V = 2 × 112 = 224 V

.

3) I added a photo of my drawing

4) Given:

R1 = R2 = R3 = 82 Ω

R4 = 12 Ω

V = 9 V

Find: R (total) - ?

This circuit is connected in parallel

[tex]\frac{1}{r} = \frac{1}{r1} + \frac{1}{r2} + \frac{1}{r3} + \frac{1}{r4} [/tex]

Since R1 = R2 = R3, we can find the total resistance in these 3 resistors using this formula:

[tex]r = \frac{r1}{n} [/tex]

n - the number of resistors

r1 - the resistance of one resistor (when all resistors have the same resistance)

[tex]r(123) = \frac{82}{3} ≈ 27.33[/tex]

Now, let's find the remaining resistance:

[tex] \frac{1}{r(total)} = \frac{1}{27.33} + \frac{1}{12} = \frac{437}{3644} [/tex]

[tex]r(total) ≈8.34[/tex]

.

5) Given:

R1 = R2 = 50 Ω

R3 = 75 Ω

R4 = 45 Ω

V = 120V

Find: I - ?

R3 and R4 are connected in parallel

[tex] \frac{1}{r(34)} = \frac{1}{75} + \frac{1}{45} = \frac{8}{225} [/tex]

[tex]r(34) ≈28.13[/tex]

R1, R2 and R34 and conected in series

[tex]r(total) = 28.13 + 50 + 50 = 128.13[/tex]

[tex]i = \frac{v}{r} = \frac{120}{128.13} ≈0.94[/tex]

.

6) Given:

R3 = 75 Ω

Find: I3 - ?

First, we have to find the voltage across R3 and R4

In order to do that, first we have know what voltage is across R1 and R2 (since the resistance is these 2 resistors are the same, the voltage will also be the same):

V1 = V2 = I × R1 = 0,94 × 50 = 47 V

Then V4 = V5 (parallel conection) = 120 - 47 - 47 = 26 V

I3 = V3/R3 = 26/75 = 0,35 A

.

7) Given:

I (total) = 0,94 A

Find: I1, I2 - ?

I1 = I2 = 0,94 A, because the current in series connection stays the same in every part of the circuit

Need Answers Asap!!! Pls And Thank You!

Related Questions

e
A proton and an electron in a hydrogen

atom are separated on the average by about

5 × 10^−11 m.

What is the magnitude of the electric field

set up by the proton at the location of the

electron? The value of the Coulomb constant

is 8.99 × 10^9 N · m^2/C^2

.

Answer in units of N/C.

Answers

Answer: The magnitude of the electric field set up by the proton at the location of the electron is 5.68 × 10^11 N/C.

Explanation: The electric field at a distance r from a point charge q is given by Coulomb’s law as:

E = kq/r^2

where k is Coulomb’s constant (8.99 × 10^9 N · m2/C2).

In this case, the distance between the proton and electron is r = 5 × 10^-11 m. Since the proton has a charge of +e and the electron has a charge of -e, where e is the elementary charge (1.602 × 10^-19 C), we have:

E = kq/r^2 = (8.99 × 10^9 N · m2/C2) × [(+e)(-e)]/(5 × 10^-11 m)^2 = 5.68 × 10^11 N/C.

The electric field set up by the proton at the location of the electron is 5.68 × 10^11 N/C.

Hope this helps, and have a great day! =)

if our estimates of the number of comets in every part of the solar system are correct, the total mass contained in comets must be:

Answers

To find the total mass contained in comets in the entire solar system, simply add up the masses calculated in step 3 for each region.

If our estimates of the number of Comets in every part of the solar system are correct, the total mass contained in comets can be calculated by following these steps:

1. Identify the number of comets in each region of the solar system: Gather data on the estimated number of comets in the inner solar system (near the Sun), the outer solar system (beyond Neptune), and the Oort cloud (farthest region of the solar system).

2. Determine the average mass of a comet: Research and find the average mass of a typical comet. Keep in mind that comets can vary in size and mass, but an average value will help in calculating the total mass contained in comets.

3. Calculate the mass of comets in each region: Multiply the number of comets in each region (from step 1) by the average mass of a comet (from step 2). This will give you the total mass of comets in the inner solar system, the outer solar system, and the Oort cloud.

4. Add up the total mass of comets in each region: To find the total mass contained in comets in the entire solar system, simply add up the masses calculated in step 3 for each region. This sum will give you an estimate of the total mass contained in comets in the solar system.

To Learn More About Masses

https://brainly.com/question/29077312

#SPJ11

consider a common tire pressure gauge. how would you estimate the uncertainty in a measured pressure at the design stage and then at the nth order? should the estimates differ? explain

Answers

To estimate the uncertainty in a measured pressure at the design stage and the nth order for a common tire pressure gauge, you should consider the factors affecting the gauge's accuracy, such as manufacturing tolerances, environmental factors, and calibration errors.

The estimates may differ as the nth order may have more accumulated uncertainties due to wear and tear, calibration drift, or changes in environmental factors.

To provide a detailed explanation, at the design stage, you would consider manufacturing tolerances, calibration errors, and the gauge's sensitivity to factors like temperature and humidity.

You would calculate the uncertainty by combining these factors according to the manufacturer's specifications or established methods such as the Guide to the Expression of Uncertainty in Measurement (GUM).

At the nth order, the uncertainty might be different as the gauge is subjected to wear and tear, causing its components to degrade, and calibration drift due to usage.

Additionally, changes in environmental factors over time can introduce new sources of uncertainty. To estimate the uncertainty at the nth order, you would need to monitor and measure the gauge's performance and environmental factors and adjust the uncertainty estimate accordingly.

To know more about calibration click on below link:

https://brainly.com/question/13095543#

#SPJ11

7. A * 1.5 * 10 ^ 2 * g piece of glass at a temperature of 70.0C is placed in a container with 1 * 10 ^ 2 * g of water initially at a temperature of 16.0 . What is the equilibrium temperature of the water ?

Answers

The eqilibrium tempreture of the water, given that 1.5×10² g piece of glass at a temperature of 70.0 °C is placed in the water is 28.5 °C

How do I determine the equilibrium temperature?

The following data were obtained from the question:

Mass of glass (M) = 1.5×10² gTemperature of glass (T) = 70.0 °CSpecific heat capacity of glass (C) = 0.84 J/gºC Mass of water (Mᵥᵥ) = 1×10² gTemperature of water (Tᵥᵥ) = 16.0 °CSpecific heat capacity of the water = 4.184 J/gºC Equilibrium temperature (Tₑ) =?

The equilibrium temperature of the water can be obtained as follow:

Heat loss = Heat gain

MC(T - Tₑ) = MᵥᵥC(Tₑ - Tᵥᵥ)

1.5×10² × 0.84 × (70 - Tₑ) = 1×10² × 4.184 × (Tₑ - 16)

126 × (70 - Tₑ) = 418.4 × (Tₑ - 16)

Clear bracket

8820 - 126Tₑ = 418.4Tₑ - 6694.4

Collect like terms

8820 + 6694.4 = 418.4Tₑ + 126Tₑ

15514.4 = 544.4Tₑ

Divide both side by 544.4

Tₑ = 15514.4 / 544.4

Tₑ = 28.5 °C

Thus, we can conclude that the equilibrium temperature of the water is 28.5 °C

Learn more about temperature:

https://brainly.com/question/12910957

#SPJ1

The removal of coal that is not close to earths surface through a horizontal opening in the side of a hill or mountain is called

Answers

Drift mining

Hope that helped

for a rotating object experiencing no net external torque, what happens to the rate of rotation if the moment of inertia of the object decreases by a factor of 2?
-The rate of rotation increases by a factor of 4. -The rate of rotation increases by a factor of 2. -The rate of rotation remains unchanged. -The rate of rotation decreases by a factor of 2. -The rate of rotation decreases by a factor of 4.

Answers

The rate of rotation increases by a factor of 2 when the moment of inertia of an object decreases by a factor of 2

When a rotating object experiencing no net external torque and the moment of inertia of the object decreases by a factor of 2, the rate of rotation increases by a factor of 2.What is the moment of inertia of a body?The moment of inertia of a body is a measure of its rotational inertia about a certain axis of rotation.

The moment of inertia is calculated by multiplying the mass of each particle by the square of its perpendicular distance from the axis of rotation and adding the product of all the particles together. It is used in the analysis of rotational motion for different objects or systems.

In a rotating object, the moment of inertia determines the amount of torque needed for an object to rotate around its axis. For instance, if the moment of inertia of an object is very high, then a large torque is required to rotate it, and if the moment of inertia is low, less torque is required.

Therefore, if the moment of inertia of an object is reduced by a factor of 2, the rate of rotation increases by a factor of 2. Hence, the rate of rotation of the object will be doubled when the moment of inertia is halved.  As a result, when an object's moment of inertia decreases by a factor of 2, the rate of rotation also rises by a factor of 2.

To learn more about : decreases

https://brainly.com/question/862502

#SPJ11

consider a parallel-plate capacitor with capacitance c. if the distance between the plates is tripled and the charge is doubled, what is the new capacitance?

Answers

So the new Capacitance, C_new, is one-third of the original capacitance:
C_new = C / 3

To find the new capacitance, we first need to understand the formula for capacitance of a parallel-plate capacitor:

C = (ε * A) / d

where C is the capacitance, ε is the permittivity of the medium, A is the area of the plates, and d is the distance between the plates.

Now let's address the changes given in the student question:

1. The distance between the plates is tripled: new distance = 3d
2. The charge is doubled: Although the charge affects the potential difference across the capacitor, it doesn't change the capacitance itself. The capacitance only depends on the geometry and materials used in the capacitor.

So, our new capacitance formula with the changed distance becomes:

C_new = (ε * A) / (3d)

Now, let's find the relationship between the new capacitance and the original capacitance:

C_new / C = [(ε * A) / (3d)] / [(ε * A) / d]

The ε and A terms cancel out:

C_new / C = 1 / 3

So the new capacitance, C_new, is one-third of the original capacitance:

C_new = C / 3

To Learn More About Capacitance

https://brainly.com/question/3004254

#SPJ11

in the case of the spring, why is it important that the vibration amplitude should be kept in such a way that the mass will be somewhat stretched even at its highest position?

Answers

In the case of a spring, it is critical to keep the vibration amplitude within a specified range to guarantee that the mass is stretched even at its most extreme position.

This is due to the fact that the amount of potential energy stored in a spring is related to the amount of deformation or stretch it undergoes. If the vibration amplitude is too tiny, the mass will not be stretched sufficiently to store enough potential energy, resulting in a lower vibration amplitude. If the amplitude is excessively large, the spring may experience maximum deformation or stretch, resulting in less potential energy storage and an unstable oscillation. As a result, keeping the amplitude reasonable guarantees that the spring stays within its elastic limit.  and stores enough potential energy to achieve a stable and consistent vibration amplitude.

learn more about  amplitude  here:

https://brainly.com/question/8662436

#SPJ4

you are riding your bicycle, which has tires with a 30-inch diameter, at a steady 15 miles per hour. what is the angular velocity of a point on the outside of the tire in radians per second?

Answers

When riding a bicycle, which has tires with a 30-inch diameter, at a steady 15 miles per hour. The angular velocity of a point on the outside of the tire in radians per second is 0.122 rad/sec.

Diameter of tire = 30 inch

Radius of tire = diameter/2= 30/2= 15 inch

Circumference of tire= 2 × π × radius

= 2 × π × 15

= 30 π inch

Distance covered in 1 hour = 15 miles = 15 × 5280 feet = 79200 feet

Distance covered in 1 second = 79200/3600 feet= 22 feet

Angular velocity is defined as rate of change of angle.

Therefore,Angular velocity = Velocity/Radius

Angular velocity = Distance/time × 1/Radius

Angular velocity = 22/15 × 1/12

Angular velocity = 22/180

Angular velocity = 0.122 rad/sec

Therefore, the angular velocity of a point on the outside of the tire in radians per second is 0.122 rad/sec.

For more such questions on angular velocity , click on:

https://brainly.com/question/29342095

#SPJ11

the students move so that they are now twice as far apart but use the same spring. how will the speed of the pulse sent now compare to the speed of the pulse sent when they were 5.0 m apart? explain your answer.

Answers

When students move so that they are now twice as far apart but use the same spring, the speed of the pulse sent will be halved as compared to the speed of the pulse sent when they were 5.0 m apart.

Let's see how. Pulse speed and spring constant are directly proportional, meaning that when the spring constant is increased, the pulse speed also increases. The same applies to the distance between the students and pulse speed. If the distance is halved, the speed is also halved. Now, let's say that the pulse travels from one end of the spring to the other. When students move to double their original distance, the distance through which the pulse travels also doubles. So, the time it takes for the pulse to travel through the spring doubles as well. As a result, the speed of the pulse is halved when the distance between the students is doubled. Thus, the speed of the pulse sent when they were 5.0 m apart will be twice the speed of the pulse sent now.

Learn more about  Pulse speed here:

https://brainly.com/question/30226790

#SPJ4

Which object would have to be farthest from an observer to be invisible to the eye ?
a. earths moon
b. a plant roughly the size of jupiter
c. a star roughly the size of the sun
d. a planet roughly the size of earth

Answers

The answer is (c) a star roughly the size of the sun.

The Sun is a massive, luminous ball of gas that sits at the center of our solar system. It is by far the largest object in our solar system, making up over 99.8% of its total mass. The Sun is approximately 4.6 billion years old and is expected to continue its current fusion process for another 5 billion years. It has a diameter of about 1.4 million kilometers and a surface temperature of around 5,500 degrees Celsius. The energy it produces through nuclear fusion provides light and warmth to the planets orbiting around it, including Earth. The Sun also emits high-energy particles that can affect Earth's atmosphere and magnetic field. Scientists study the Sun to understand its effects on the solar system and to gain insight into the fundamental processes of the universe.

Learn more about  star roughly the size of the sun here:

https://brainly.com/question/31317116

#SPJ1

the tilt of the earth's axis relative to its plane of orbit is 23.5 degrees. which of the following events might you predict to occur if the angle of tilt increased to 33 1/2 degrees? * 5 points a) summers in the united states would likely become warmer. b) winters and summers in australia would become indiscrete. c) seasonal variation at the equator might decrease significantly. d) the north and south poles would experience massive ice melts.

Answers

If the Earth's axial tilt is increased from 23.5 degrees to 33 1/2 degrees, the following event might be predicted to occur: Summers in the United States would likely become warmer.

The Earth's axis would become increasingly perpendicular to the plane of its orbit around the sun if the tilt was increased. Because of this, the Northern Hemisphere would get more direct sunshine throughout the summer, warming it. In contrast, the Southern Hemisphere would see less direct sunshine, which would result in milder summers. This temperature variation may have a considerable impact on precipitation and weather patterns, among other aspects of the climate.

It is significant to highlight that several elements affect climate patterns, making it difficult to forecast the impacts of changes in the Earth's tilt. Thus, this forecast is tentative and open to disagreement among scientists and more investigation.

To learn more about the axial tilt of Earth, refer to:

https://brainly.com/question/8678564

#SPJ4

a weight of 40 n is located at a distance of 8 cm from the fulcrum of a simple balance beam. at what distance from the fulcrum should a weight of 25 n be placed on the opposite side in order to balance the system?

Answers

The 25 N weight should be placed 0.128 meters from the fulcrum in order to balance the system.

The balance beam is in equilibrium when the sum of the clockwise torques is equal to the sum of the counterclockwise torques. That is:

(clockwise torque) = (counterclockwise torque)

We can express each torque as the product of the weight and its perpendicular distance from the fulcrum. Assuming the fulcrum is at the center of the beam, we can express the torque of the 40 N weight as:

40 N x 0.08 m = 3.2 Nm

where 0.08 m is the distance from the fulcrum to the 40 N weight.

Let x be the distance from the fulcrum to the 25 N weight. Then, the torque of the 25 N weight is:

25 N x m = 25x Nm

The 25 N weight must be placed on the opposite side of the fulcrum, so its torque acts in the opposite direction. Therefore, we have:

(clockwise torque) = (counterclockwise torque)

3.2 Nm = 25x Nm

Solving for x, we get:

x = 3.2 Nm / 25 N

x = 0.128 m

Therefore, the 25 N weight should be placed 0.128 meters from the fulcrum in order to balance the system.

For such more question on fulcrum:

https://brainly.com/question/21577134

#SPJ11

what is the change in the potential energy of the rolling solid cylinder if the vertical height difference between the starting position of the center of mass (at rest) of the solid cylinder and the ending position of the center of mass of the solid cylinder is h?

Answers

The change in potential energy of a rolling solid cylinder of mass m and radius r, as it moves from a starting position to a final position at a height h above the starting position can be calculated using the formula: ΔPE = mgh.

Where ΔPE is the change in potential energy, g is the acceleration due to gravity (9.8 m/s^2), and h is the height difference.

However, since the cylinder is rolling, some of the potential energy is converted into kinetic energy of rotation as the cylinder starts to roll. The amount of kinetic energy of rotation depends on the moment of inertia of the cylinder, I, and the angular velocity, ω, of the cylinder.

Therefore, the total change in energy can be written as:

ΔE = ΔPE + ΔKE

= mgh + 0.5 I ω^2

where ΔKE is the change in kinetic energy due to rotation.

To fully calculate the change in potential energy of the cylinder, one would need to know additional information, such as the initial and final velocities of the cylinder, or the type of surface the cylinder is rolling on.

To learn more about potential energy

https://brainly.com/question/24284560

#SPJ4

A biker travels once around a circular track of radius 20.0m in3s calculate the average tangential speed

Answers

Answer:

the average tangential speed of the biker is approximately 41.89 m/s.

when kayla stands on her trampoline, it sags by 0.20 m . now she starts bouncing. part a how much time elapses between the instant when she first lands on the trampoline's surface and when she passes the same point on the way up?

Answers

The time that elapses between Kayla first landing on the trampoline and passing the same point on the way up is 0.28 seconds.

To find this, we can use the equation for free fall: y = 0.5 * g * t^2, where y is the displacement, g is the acceleration due to gravity (9.81 m/s^2), and t is the time elapsed.

First, rearrange the equation to solve for t: t = sqrt(2 * y / g). Now, plug in the displacement (0.20 m) and the acceleration due to gravity (9.81 m/s^2): t = sqrt(2 * 0.20 / 9.81) ≈ 0.20 seconds.

Since Kayla's motion consists of both falling and bouncing back up, we need to double this time: 0.20 * 2 = 0.40 seconds.

To know more about gravity click on below link:

https://brainly.com/question/14874038#

#SPJ11

what is the hydrogen-fusing lifetime of a star with a mass 1.3 times that of the sun, which shines with a luminosity that is 3.2 times that of the sun? report your answer in millions of years (myr).

Answers

The hydrogen-fusing lifetime of a star with a mass 1.3 times that of the sun, which shines with a luminosity that is 3.2 times that of the sun is about 225 million years (Myr).

The hydrogen-fusing lifetime of a star with a mass 1.3 times that of the sun, which shines with a luminosity that is 3.2 times that of the sun is about 225 million years (Myr).Explanation:A star's hydrogen-fusing lifetime is the length of time that it can fuse hydrogen into helium in its core until it runs out of hydrogen fuel. As a result, the star's size, mass, and luminosity all contribute to its hydrogen-fusing lifetime.Hydrogen-fusing lifetime of a star can be calculated using the following formula:t = (M/Mo)².5 (L/Lo)^-3.5t = hydrogen-fusing lifetimeM = mass of the starMo = mass of the sunL = luminosity of the starLo = luminosity of the sunWe can now substitute the given values into the formula:t = (1.3/1)^2.5 (3.2/1)^-3.5t = 225 MyrTherefore, the hydrogen-fusing lifetime of a star with a mass 1.3 times that of the sun, which shines with a luminosity that is 3.2 times that of the sun is about 225 million years (Myr).

Learn more about hydrogen-fusing here:

https://brainly.com/question/29462031

#SPJ4

two renewable energy sources are solar and wind. describe the difference between photovoltaic cells and solar heating panels

Answers

Photovoltaic cells convert sunlight directly into electricity, while solar heating panels use sunlight to heat a fluid, which can then be used for heating purposes.

Both photovoltaic cells and solar heating panels are used to harness solar energy, but they differ in their method of converting sunlight into usable energy.

Photovoltaic cells, also known as solar cells, convert sunlight directly into electricity using a semiconductor material. When sunlight strikes the cell, it excites electrons in the semiconductor, creating a flow of electricity. This electricity can be used immediately or stored in batteries for later use. Photovoltaic cells are commonly used in solar panels for homes, buildings, and spacecraft.

Solar heating panels, on the other hand, use sunlight to heat a fluid that flows through the panel, such as water or air. The heated fluid can then be used for heating buildings or water for domestic use. Solar heating panels are more commonly used for residential and commercial heating applications.

To learn more about photovoltaic cells

https://brainly.com/question/29553595

#SPJ4

an electron and proton are accelerated through the same potential difference. a) the electron has the greater k. b) the proton has the greater k. c) the electron has the greater speed. d) the proton has the greater speed

Answers

Since the proton has a greater mass than the electron, it will have a greater kinetic energy. Electron  will experience a larger acceleration and will have a greater speed than proton Therefore, options: b & c are correct.

When an electron and a proton are accelerated through  same potential difference, their kinetic energies and speeds will be different due to their different masses and charges.

k = (1/2)mv^2

Since the potential difference is the same, the work done on each particle will be the same. However, since  mass of an electron is much smaller than that of a proton, it will experience a larger acceleration and will have a greater speed than the proton. Therefore, option (c) &(b) are correct.

To know more about kinetic energy, here

brainly.com/question/15764612

#SPJ4

what is the emf of a battery that increases the electric potential energy of 0.050 c c of charge by 0.40 j j as it moves it from the negative to the positive terminal?

Answers

The electromotive force (EMF) of a battery that increases the electric potential energy of 0.050 C of charge by 0.40 J as it moves it from the negative to the positive terminal is 8 V.

Electromotive force is a measure of a cell's ability to supply electrons to a circuit. Electromotive force (EMF) is a measure of the energy provided by an electrochemical cell or battery per unit charge as the charge passes through it. The device's output voltage is measured by EMF. It is a voltage created by a battery or any other voltage source that induces an electric current in a closed circuit.

The emf of the battery can be calculated using the formula:

emf = ΔPE / Q,

where ΔPE is the change in electric potential energy and Q is the charge.

In this case, ΔPE = 0.40 J and Q = 0.050 C.

So, emf = (0.40 J) / (0.050 C) = 8 V.

The emf of the battery is 8 volts.

For more such questions on electromotive force, click on:

https://brainly.com/question/10497991

#SPJ11

a flywheel slows from 549 to 400 rev/min while rotating through 24 revolutions. what is the (constant) angular acceleration of the flywheel? 1.62 incorrect rad/s2 incorrect incorrect. how much time elapses during the 24 revolutions? 3.04 correct s

Answers

The angular acceleration of the flywheel is -1.62 rad/s^2. The time elapsed during the 24 revolutions is 2.07 seconds.

Let's convert the initial and final angular velocities to radians per second, and the angular displacement to radians:

initial angular velocity = 549 rev/min * 2π/60 = 57.68 rad/s

final angular velocity = 400 rev/min * 2π/60 = 41.89 rad/s

angular displacement = 24 revolutions * 2π = 48π rad

The time taken to rotate through 24 revolutions can be found using the formula:

angular displacement = (initial angular velocity * time taken) + (1/2 * angular acceleration * time taken^2)

Substituting the values, we get:

48π = (57.68 * t) + (0.5 * a * t^2)

where t is the time taken, and a is the angular acceleration.

To solve for the angular acceleration, we can rearrange the equation as:

a = (48π - 57.68t) / (0.5 * t^2)

Now, we can substitute the given values and solve for the angular acceleration:

a = (48π - 57.68 * 24) / (0.5 * 24^2)

a = -1.62 rad/s^2

To find the time elapsed during the 24 revolutions, we can substitute the calculated value of the angular acceleration into the equation for angular displacement:

48π = (57.68 * t) + (0.5 * -1.62 * t^2)

This is a quadratic equation in t, which we can solve using the quadratic formula. The solutions are:

t = 2.07 s or t = 33.3 s

Since the time elapsed during the 24 revolutions cannot be negative or greater than the total time taken, the correct solution is:

t = 2.07 s

To know more about flywheel, here

brainly.com/question/23823203

#SPJ4

--The complete question is, A flywheel slows from 549 to 400 rev/min while rotating through 24 revolutions. what is the (constant) angular acceleration of the flywheel? how much time elapses during the 24 revolutions?--

a block is released from rest at the top of a 32-m long frictionless ramp inclined at 59 above the horizontal. what is the block's speed at the bottom of the ramp?

Answers

The block's speed at the bottom of the ramp is approximately 23.2 m/s.


To find the block's speed at the bottom of the ramp, we can use the conservation of energy principle. The potential energy at the top of the ramp will be converted into kinetic energy at the bottom.

First, we need to calculate the height (h) of the ramp using the sine function:
h = 32m * sin(59°) ≈ 32m * 0.857 ≈ 27.424m

Next, we calculate the potential energy (PE) at the top of the ramp:
PE = m * g * h, where m is the mass of the block and g is the acceleration due to gravity (9.81 m/s²).

At the bottom of the ramp, all the potential energy will have been converted into kinetic energy (KE):
KE = 0.5 * m * v², where v is the final velocity we need to find.

Since PE = KE, we can set up the following equation:
m * g * h = 0.5 * m * v²

Notice that the mass (m) cancels out on both sides of the equation:
g * h = 0.5 * v²

Now, solve for the final velocity (v):
v² = 2 * g * h
v² = 2 * 9.81 m/s² * 27.424m
v² ≈ 538.5

Take the square root to find the final velocity:
v ≈ √538.5 ≈ 23.2 m/s

So, the block's speed at the bottom of the ramp is approximately 23.2 m/s.

Know more about   acceleration  here:

https://brainly.com/question/460763

#SPJ11

not sure on what to write in the blank spots.

Answers

Answer:

Explanation:

I hope this was all you wanted. Everything else seems finished correctly.

newton's second law: a 60.0-kg person rides in an elevator while standing on a scale. the elevator is traveling upward but slowing down at a rate of 2.00 m/s2. the reading on the scale is closest to

Answers

The reading on the scale is closest to 708.6 N. This was calculated using Newton's Second Law which states that the force acting on an object is equal to the mass of the object multiplied by its acceleration (F = ma).

In this case, the force acting on the person is the combination of gravitational force and the force exerted by the elevator.


1. Calculate gravitational force: The gravitational force (weight) acting on the person can be found using the equation F_gravity = m * g, where m is the mass of the person (60.0 kg), and g is the acceleration due to gravity (approximately 9.81 m/s²).

F_gravity = 60.0 kg * 9.81 m/s² = 588.6 N (Newtons)


2. Calculate force due to the elevator: Since the elevator is slowing down while going upwards, it's exerting an additional force on the person in the downward direction. The force can be calculated using F_elevator = m * a, where a is the deceleration rate of the elevator (2.00 m/s²).

F_elevator = 60.0 kg * 2.00 m/s² = 120 N (Newtons)


3. Calculate the total force acting on the person: As the elevator's force is downward, and the gravitational force is also downward, we add the two forces together.

F_total = F_gravity + F_elevator = 588.6 N + 120 N = 708.6 N (Newtons)


4. Find the reading on the scale: The scale measures the force acting on the person (in this case, the total force), which is equal to 708.6 N.

Know more about force here:

https://brainly.com/question/13191643

#SPJ11

2.03 kg book is placed on a flat desk. suppose the coefficient of static friction between the book and the desk is 0.562 and the coefficient of kinetic friction is 0.305 . how much force is needed to begin moving the book?

Answers

If the book and desk have a static friction coefficient of 0.562 and a kinetic friction coefficient of 0.305, then the lowest force needed to start the book moving is 10.95 N.

The minimum force required to initiate the motion of the book can be determined using the formula:  fsmax = fs <= [tex]f_{k[/tex]. fsmax is the maximum static friction, fs is static friction, and   [tex]f_{k[/tex]. is kinetic friction.

Let's calculate fs and  [tex]f_{k[/tex]separately first. fs = (coefficient of static friction) × (normal force)= (0.562) × (9.81 m/s² × 2.03 kg)= 10.95 N.  [tex]f_{k[/tex] = (coefficient of kinetic friction) × (normal force)= (0.305) × (9.81 m/s² × 2.03 kg)= 6.04 N.

Now, we can substitute these values in the equation for fsmax: fsmax = fs<=  [tex]f_{k[/tex] =10.95 <= 6.04= 10.95 N. As a result, the minimum force required to initiate the motion of the book is 10.95 N.

Learn more about static friction here:

https://brainly.com/question/13000653

#SPJ11

suppose the voltage to be measured in a certain experiment is always positive, and never exceeds 2.5 v. how many of the 16 bits (not to be confused with bins) of the a/d converter are effectively utilized?

Answers

Only 8 bits of the 16 bits of Analog to Digital Converter (ADC) will be effectively utilized. This is because only the positive voltage signals will be measured, and the negative signals will not be effective.

When measuring voltage in an experiment, suppose the voltage to be measured is still positive and never exceeds 2.5 V. As a result, only half of the total 16 bits in the ADC are effectively utilized. This is because when the signal never goes negative, only positive values can be measured. As a result, we can use only the positive portion of the A/D converter's dynamic range, and only half of the bits will suffice.

ADC stands for Analog to Digital Converter. An ADC is used to transform a voltage or current signal into a binary code that can be used in digital computer processing. An ADC has a fixed number of bits that it uses to represent the analog signal. The number of bits that are used to represent the analog signal is known as the resolution of the ADC.

Suppose a 16-bit ADC is used, which can represent the analog voltage with a resolution of 2^16, which equals 65,536 discrete levels. The voltage range that can be measured is divided into these 65,536 levels. For a 16-bit ADC, the voltage range is usually from -5 volts to +5 volts. However, if the voltage signal to be measured is always positive, only half of the ADC's dynamic range is needed.

As a result, only half of the ADC's bits are utilized, i.e., only the positive portion of the dynamic range is used. As a result, we will only use the first 8 bits of the ADC, as they can represent up to 256 levels of the voltage signal. The remaining 8 bits will not be used because the voltage signal to be measured is always positive. Therefore, only 8 bits of the ADC are effectively used in this experiment.

Know more about Analog to Digital Converter (ADC) here:

https://brainly.com/question/31052198

#SPJ11

three boys are trying to balance a seesaw. the board is 6.0 m long and has a mass of 10 kg. two of the boys are at the ends, one is 50 kg and the other is 35 kg. where does the third 25 kg boy need to place himself on the seesaw so it will balance? assume the fulcrum is at the center of the board [9:59 pm]

Answers

To balance the seesaw, the third boy needs to place himself at a distance of 1.6 m from the 35 kg boy.

First, we need to find the centre of mass of the seesaw, which is at the midpoint of the board, or 3.0 m from the fulcrum. We can then calculate the torques of the two boys at the ends. The 50 kg boy has a torque of (50 kg)(6.0 m - 3.0 m) = 150 Nm, and the 35 kg boy has a torque of (35 kg)(3.0 m) = 105 Nm. To balance the seesaw, the third boy needs to create a torque that is equal and opposite to the torques of the other two boys. Let's call the distance from the fulcrum to the third boy x. Then we have: (50 kg)(6.0 m - x) = (35 kg)(x) Solving for x, we get x = 2.1 m. Therefore, the third boy needs to sit 2.1 m from the fulcrum on the opposite side of the 35 kg boy to balance the seesaw

Learn more about seesaw here:

https://brainly.com/question/31090053

#SPJ11

a person views his face in a 20- cm focal length concave mirror. where should his face be in order to form an upright image that is magnified by a factor of 1.7?

Answers

The face should be placed at 6.24 cm in order to form an upright image that is magnified by a factor of 1.7 when viewed in a 20-cm focal length concave mirror.

Given data:focal length of mirror, f = -20 cm.Magnification, m = 1.7Image formed is upright.

Hence, the object distance (u) should be less than the focal length (f) of the mirror.Object distance formula is given by:1/v + 1/u = 1/fMagnification formula is given by:m = v/uwhere,m = 1.7v = magnified image distanceu = object distancef = -20 cmOn substituting the values in magnification formula, we get,1.7 = v/u1.7u = v ...(1).

On substituting the values in object distance formula, we get,1/v + 1/u = 1/f1/v + 1/u = -1/20v = -20u / (u - 20) ...(2)Substituting the value of v from equation (1) in equation (2), we get:1/u + u / (1.7u - 20) = -1/20On solving the above equation, we get,u = 6.24 cm.

Learn more about concave mirror here:

https://brainly.com/question/3555871

#SPJ11

two long, straight wires both carry current to the right, are parallel, and are 25 cm apart. wire one carries a current of 2.0 a and wire two carries a current of 5.0 a. how far from wire 1 is the net magnetic field equal to 0? group of answer choices 3.43 cm 4.57 cm 1.43 cm 7.14 cm

Answers

The 4.57 cm far from wire one is the net magnetic field equal to zero. The answer is 4.57 cm (the only option given that is close to 4.5 cm).

B1 = μ0 * I1 / (2 * π * r1)

B2 = μ0 * I2 / (2 * π * r2)

Bnet = B1 + B2 = μ0 * I1 / (2 * π * r1) + μ0 * I2 / (2 * π * (0.25 - x))

μ0 * I1 / (2 * π * r1) = -μ0 * I2 / (2 * π * (0.25 - x))

Multiplying both sides by (2 * π * r1 * (0.25 - x)) and simplifying, we get:

r1 = (2 * I2 * (0.25 - x)) / I1

Substituting the given values, we get:

r1 = (2 * 5.0 * (0.25 - x)) / 2.0 = 2.5 - 2.5x

2.5 - 2.5x = 0

Solving for x, we get:

x = 1.0/4.0 = 0.25 m

So the distance from wire 1 where the net magnetic field is zero is 0.25 m, or 25 cm.

A magnetic field is created by moving electric charges, such as the electrons that flow through a wire carrying an electric current or the spinning electrons in an atom. Magnetic fields can also be generated by magnets, which have a north and south pole that attract or repel each other depending on their orientation.

Magnetic fields are invisible to the eye but can be detected using a compass, which aligns itself with the direction of the magnetic field. They are also used in a variety of everyday applications, such as in speakers, motors, and generators. The strength and direction of a magnetic field can be described using mathematical equations, and the field lines can be visualized using magnetic field maps.

To learn more about Magnetic field visit here:

brainly.com/question/23096032

#SPJ4

examine the four specimens in sample set s. these are metamorphic index minerals. are minerals the same thing as rocks?

Answers

While the four specimens in sample set S may be useful in determining the type of metamorphic rock present in a particular location, they are not rocks themselves but rather individual mineral specimens.

Minerals and rocks are not the same thing. A mineral is a naturally occurring inorganic solid with a specific chemical composition and crystal structure.

Rocks, on the other hand, are made up of one or more minerals, as well as other materials such as organic matter, volcanic glass, or other rock fragments.

In this case, the four specimens in sample set S are metamorphic index minerals. This means that they are minerals that are commonly used to identify and classify metamorphic rocks based on their mineral assemblage.

It is possible that these minerals may be present in metamorphic rocks, but they are not the same thing as rocks themselves.

Therefore, while the four specimens in sample set S may be useful in determining the type of metamorphic rock present in a particular location, they are not rocks themselves but rather individual mineral specimens.

To learn more about metamorphic rocks here:

https://brainly.com/question/19930528

#SPJ11

Other Questions
in combination with other drugs, hiv patients are prescribed protease inhibitors to treat their disease. what part of the hiv virion is targeted by these types of drugs? group of answer choices assume that the government of a country decides to give out tax refunds of $4.5 million to small domestic firms that are struggling. if the marginal propensity to save in the country is 0.25, then what is the maximum impact this measure will have on the gdp of the country? what does i+=1 in python mean What poem form is In Colorado My Father Scoured and Stacked Dishes how many stanzas and how long are the stanzas are the nurse is caring for a patient with a spinal cord injury resulting from a diving accident. the patient has a halo fixator and an indwelling urinary catheter. the patient reports a severe headache and has an elevated blood pressure. which medication would the nurse anticipate being prescribed? why do balanced translocations between two chromosomes still often result in healthy individuals? how can such a translocation lead to an abnormal phenotype in the offspring even if the parents are both healthy? select the sentence that generally is the best style for interesting writing based on what has been covered in the text and the powerpoints. group of answer choices the process was discovered by ace chemists. ace chemists discovered the process. ace chemists were responsible for discovering the process. discovery of this process was made by ace chemists. What is federalism?Federalism is a system in which only the federal government can collect taxes from the citizens of a state.Federalism is a system in which state governments reserve some political power for the federal government.Federalism is a system in which all political power rests with the three branches of the federal government.Federalism is a system in which political power is shared between the federal government and state governments. a tank, shaped like a cone has height 12 meters and base radius 1 meter long. it is placed so that the circular part is upward. it is full of water, and we have to pump it all out by a pipe that is always leveled at the surface of the water. assume that a cubic meter of water weighs , i.e. the density of water is ? . how much work does it require to pump all water out of the tank? enter the exact value of your answer. 12. X, Y and Z were partners in a firm sharing profits and losses in the ratio of 2:2:1. The firm closes itsbooks on 31st March every year. Y died on 24th June, 2018. Y's share in the profits of the firm till thedate of death from the last Balance Sheet was to be calculated on the basis of sales. Sales during theyear 2017-18 was 15,00,000 and profit earned during the year was 3,00,000. Sales from 1st April, 2018to 24th June, 2018 were 2,00,000. On Y's death goodwill of the firm was valued at 1,20,000. The totalamount payable to Y's executors on his death was 1,75,000. This amount was paid to them on 15-7-2018.Pass the necessary journal entries for the above transactions in the books of the firm. Groundwater is able to create caves in areas where, as the water flowsunderground, itO deposits sediments.O is exposed to heat.O erodes rock material.Ocauses earthquakes. Give four (4) reasons for the 1948 riots jack is 30 years older than his son jim. FIve years ago jack was 3 times as old as his son. How old are they today? a nurse is reviewing the medical record of an immobilized patient who has developed a pressure ulcer. which nutritional deficiency would the nurse identify as placing the patient at risk for delayed wound healing? Suppose you just received a shipment of fourteen televisions. Two of the televisions are defective. If two televisions are randomly selected, compute the probability that both televisions work. What is the probability at least one of the two televisions does not work.The probability that both televisions work is ___ the number of skittles in a giant-size bag is between 1150 and 1300 candies, and is uniformly distributed. what is the probability that a bag contains between 1200 and 1225 candies? enter your answer as a percentage accurate to two decimal places. for example, a probability of 0.4567 is 45.67% so it should be entered as 45.67. how much force is the air exerting on the front surface of the book with dimensions 15.0 cm x 25.0 cm. assume atmospheric pressure equal to 100,000 pa. when you use the animate() method, what must you code to define the animation? group of answer choices a properties map a callback function a duration parameter css properties Newton's third law , when applied to the collision of the rocket and the asteroid as shown in Figure 32 can be stated as follows : The force exerted by the rocket on the asteroid is equal and opposite to the force exerted by the asteroid on the rocket . Explain how this statement links to the conservation of momentum in the collision . How did the assassination of Abraham Lincoln impact the Civil War?Confederate states agreed to free all enslaved persons in their territory.Confederate president Jefferson Davis ordered General Lee to resume fighting.The Union army attacked southern cities and towns to retaliate for his death.The task of Reconstruction was passed to President Andrew Johnson.