the measure of angle V is approximately 21.87 degrees. To find the measure of angle V, we need to use the fact that the sum of the angles in a triangle is 180 degrees. Therefore, we can write:
m∠V + m∠W + m∠X = 180
where angle X is the third angle in the triangle formed by V, W, and X. We know that m∠W is (3x+4) degrees, and we can see that angle X is adjacent to angle V, so we can use the fact that the sum of adjacent angles is equal to the total angle to write:
m∠V + m∠X = (2x+2) degrees
Now we can substitute this expression for m∠X into the first equation to eliminate m∠X:
m∠V + (2x+2 - m∠V) + (3x+4) = 180
Simplifying and solving for x, we get:
5x + 6 = 180
5x = 174
x = 34.8
Now we can substitute this value of x back into our expression for m∠V + m∠X to find m∠V:
m∠V + (2(34.8)+2 - m∠V) = 71.6
Simplifying and solving for m∠V, we get:
3m∠V = 65.6
m∠V = 21.87 (rounded to two decimal places)
Therefore, the measure of angle V is approximately 21.87 degrees.
To know more about measure of angle click here:
brainly.com/question/16352647
#SPJ4
I need help with number 26 asap! Thank you so much!!
if 1 million passengers pass through the st. louis airport with checked baggage each month, a successful six sigma program for baggage handling would result in how many passengers with misplaced luggage? group of answer choices 3.4 34 6.0 2700 6 times the monthly standard deviation of passengers
Answer: 3.4 The number of passengers with misplaced luggage if 1 million passengers pass through the St. Louis airport with checked baggage each month would be 3.4 passengers.
A six sigma program is a quality improvement methodology that uses data and statistical analysis to identify and eliminate defects in a process. Six Sigma methodologies are used to improve efficiency and minimize defects in many business processes, including baggage handling in airports.
Sigma is a term used to refer to standard deviation, which is a measure of the spread of data in a process. A six sigma program aims to reduce the standard deviation in a process to a level where there are fewer than 3.4 defects per million opportunities.
Therefore, if one million passengers pass through the St. Louis airport each month, a successful six sigma program for baggage handling would result in 3.4 passengers with misplaced luggage.
You can read more about standard deviation at https://brainly.com/question/475676
#SPJ11
I need help with number 26 asap! Thank you so much!!
Therefore, the only solution to the equation cot² x cos x = cot²x on the interval [0, 2m) is x = 0.
What is equation?An equation is a mathematical statement that shows the equality between two expressions. The expressions on either side of the equals sign are called the left-hand side and the right-hand side of the equation. An equation can be written in many different forms, but the most common form is: Left-hand side = Right-hand side
In the given question,
We start by bringing all the terms to one side of the equation, which gives:cot² x (cos x - 1) = 0
Now, we need to solve for x such that this equation holds on the interval [0, 2m).
First, we consider the case where cot² x = 0. This occurs when cot x = 0, or x = π/2, 3π/2, 5π/2, etc. However, none of these solutions are in the given interval [0, 2m), so we can ignore this case.
Next, we consider the case where cos x - 1 = 0. This occurs when cos x = 1, or x = 2nπ, where n is an integer. The only solution that is in the given interval [0, 2m) is x = 0.
Therefore, the only solution to the equation cot² x cos x = cot² x on the interval [0, 2m) is x = 0.
To know more about equations, visit:
https://brainly.com/question/28243079
#SPJ1
Question 2(Multiple Choice Worth 2 points)
(Comparing Data MC)
The line plots represent data collected on the travel times to school from two groups of 15 students.
A horizontal line starting at 0, with tick marks every two units up to 28. The line is labeled Minutes Traveled. There is one dot above 4,6,14, and 28. There are two dots above 10, 12, 18, and 22. There are three dots above 16. The graph is titled Bus 47 Travel Times.
A horizontal line starting at 0, with tick marks every two units up to 28. The line is labeled Minutes Traveled. There is one dot above 8, 9,18, 20, and 22. There are two dots above 6, 10, 12,14, and 16. The graph is titled Bus 18 Travel Times.
Compare the data and use the correct measure of variability to determine which bus is the most consistent. Explain your answer.
Bus 18, with an IQR of 16
Bus 47, with an IQR of 24
Bus 18, with a range of 16
Bus 47, with a range of 24
The correct answer is: Bus 18, with an IQR of 9
How to solveTo determine the most consistent bus, we need to calculate the measure of variability, which gives us an idea of the spread of the data.
In this case, we'll use the Interquartile Range (IQR) as the measure of variability.
The IQR is the range between the first quartile (Q1, the 25th percentile) and the third quartile (Q3, the 75th percentile) of the data.
A smaller IQR indicates more consistency in travel times.
Bus 47 Travel Times: 4, 6, 10, 10, 12, 12, 14, 16, 16, 16, 18, 18, 22, 22, 28
Q1 (25th percentile): 10
Q3 (75th percentile): 22
IQR: 22 - 10 = 12
Bus 18 Travel Times: 6, 6, 8, 9, 10, 10, 12, 12, 14, 14, 16, 16, 18, 20, 22
Q1 (25th percentile): 9
Q3 (75th percentile): 18
IQR: 18 - 9 = 9
Comparing the IQRs, we can see that Bus 18 has a smaller IQR (9) compared to Bus 47 (12).
This means that Bus 18 has more consistent travel times than Bus 47.
So, the correct answer is:
Bus 18, with an IQR of 9
Read more about Interquartile Range here:
https://brainly.com/question/4102829
#SPJ1
Simplify the expression. .
2. 3h( 6 – k)
Step by step please
write an equation in slope-intercept form of the line that passes through the point (2,15) and (5,21)
Answer:
y = 2x + 11
Explanation:
N/A
A small restaurant has a grease recycling tank in the shape of a cylinder. How much grease measured in cubic centimeters can the restaurant store if the tank has a diameter of 197.2 cm and a height of 223.7 cm? Use 3.14 for `pi`.
The restaurant can store approximately [tex]6.864 * 10^6[/tex] cubic centimeters of grease in the recycling tank in the shape of a cylinder.
The formula for the volume of a cylinder is V = π[tex]r^2[/tex]h, where V is the volume, r is the radius of the circular base, and h is the height of the cylinder.
To use this formula, we need to know the values of r and h for the grease recycling tank. The problem tells us that the diameter of the tank is 197.2 cm, which means the radius is half of the diameter:
r = d/2 = 197.2 cm / 2 = 98.6 cm.
The problem also tells us that the height of the tank is 223.7 cm.
Now we can plug in the values of r and h into the formula for the volume of a cylinder:
V = π[tex]r^2[/tex]h
V = π[tex](98.6 cm)^2(223.7 cm)[/tex]
V = [tex]3.14 * (98.6 cm)^2 * (223.7 cm)[/tex]
V ≈ [tex]6.864 * 10^6 cm^3[/tex]
Therefore, the volume of the grease recycling tank is approximately [tex]6.864 * 10^6[/tex] cubic centimeters, which means that the restaurant can store that amount of grease in the tank.
To learn more about volume please click on below link
https://brainly.com/question/1578538
#SPJ1
Write 1.1 as a mixed number.
-
The theoretical probability of tossing two heads when tossing a pair of coins is 0.25. When the pair of coins was tossed 20 times, two heads came up only 2 times. Which procedure would result in an experimental probability that is closer to the theoretical probability?
toss the coins more than 20 times
toss the coins fewer than 20 times
count only those tosses that result in two heads or two tails
toss three coins instead of two coins
Answer:
Toss the coins more than 20 times.
Step-by-step explanation:
Toss the coins more than 20 times. The experimental probability gets closer to the theoretical probability when the sample size is larger.
5. discuss the effects on sample size, requirements of changing the desired confidence level, and the acceptable sampling error.
Changing any of these factors will impact the others. Increasing the sample size generally results in more accurate estimates, while increasing the desired confidence level or decreasing the acceptable sampling error requires a larger sample size.
What is sample size?Sample size refers to the number of individuals or observations included in a study or experiment. It is a crucial component of research design because it determines how much data can be collected and analyzed, as well as the precision and accuracy of the results.
What is sampling error?Sampling error is the difference between the results obtained from a sample and the results that would have been obtained if the entire population had been surveyed. It is a measure of the variability between the sample estimate and the true population parameter.
In the given question,
The sample size, desired confidence level, and acceptable sampling error are all interrelated factors in statistical sampling. Changing any of these factors will have an impact on the others.
First, let's define each factor:
Sample size: The number of individuals or items included in a sample.Confidence level: The degree of certainty that the true population parameter falls within the calculated confidence interval.Sampling error: The degree of error or variation between the sample statistic and the true population parameter.Now, let's discuss the effects of changing each factor:
Sample size: Increasing the sample size generally results in a more accurate estimate of the population parameter. This is because a larger sample size reduces the effect of random variability and increases the precision of the estimate.
Confidence level: Increasing the desired confidence level requires a larger sample size to achieve the same level of precision. This is because a higher level of confidence requires a wider confidence interval, which in turn requires more data points.
Sampling error: Decreasing the acceptable sampling error requires a larger sample size to achieve the same level of precision. This is because a smaller sampling error requires a narrower confidence interval, which in turn requires more data points.
To know more about sample size and sampling error, visit:
https://brainly.com/question/15375591
#SPJ1
Scale factors,
For 19 would it be 5/4 since the polygon is free trying bigger and for 20 would it be 4/5 since it is getting smaller?
All my friends are writing it the other way around but I’m confused because how can it get bigger if it’s less than 1?
The answers of the following questions are mentioned below respectively.
What is scale factor?Scale factor is the ratio of the lengths of corresponding sides of two similar figures. Two figures are considered similar if they have the same shape, but not necessarily the same size.
19.To find the scale factor of PQRS to JKLM, we can use the fact that the corresponding sides of similar figures are proportional. Thus, we have:
PQ/JK = QR/KL = RS/LM
Substituting the given values, we get:
w/25 = 12/15 = 10/x
Simplifying, we get:
w = 5/3 * 25 = 41.67 (approx)
x = 15/2 = 7.5
y = 25 * 7.5 / 15 = 12.5
Therefore, the scale factor of PQRS to JKLM is PQ/JK = w/25 = 41.67/25 = 1.6667 (approx).
20. To find the scale factor of JKLM to PQRS, we can take the reciprocal of the scale factor of PQRS to JKLM. Thus, we have:
JK/PQ = 1/(PQ/JK) = 1/1.6667 = 0.6 (approx)
Therefore, the scale factor of JKLM to PQRS is JK/PQ = 0.6 (approx).
21. To find the values of ti.. .r. and v, we need more information or equations.
22. To find the perimeter of each polygon, we can add up the lengths of the sides. Thus, we have:
Perimeter of JKLM = KJ + JM + ML + LK = 25 + y + x + 15 = y + x + 40 = 20 + 7.5 + 40 = 67.5
Perimeter of PQRS = PQ + QR + RS + SP = w + 12 + 10 + 16 = w + 38 = 41.67 + 38 = 79.67 (approx)
Therefore, the perimeter of JKLM is 67.5 and the perimeter of PQRS is 79.67 (approx).
23. To find the ratio of the perimeter of PQRS to the perimeter of JKLM, we can divide the perimeter of PQRS by the perimeter of JKLM. Thus, we have:
Ratio of perimeter of PQRS to perimeter of JKLM = Perimeter of PQRS / Perimeter of JKLM = 79.67 / 67.5 = 1.18 (approx)
Therefore, the ratio of the perimeter of PQRS to the perimeter of JKLM is 1.18 (approx).
To know more about perimeter visitL:
https://brainly.com/question/6465134
#SPJ1
19. The scale ratio of PQRS to JKLM is PQ/JK = 1.6667. (approx).
20. JK/PQ is the scale factor of JKLM to PQRS is = 0.6 (approx).
22. The JKLM perimeter is 67.5 and the PQRS perimeter is 79.67 (approx).
23. The PQRS perimeter's ratio to the JKLM perimeter is 1.18. (approx).
What is scale factor?The ratio of the lengths of the respective sides of two similar figures is known as the scale factor. When two figures share the same shape but not necessarily the same height, they are said to be similar.
19. We can use the knowledge that the corresponding sides of comparable figures are proportional to determine the scale factor of PQRS to JKLM.
So, here we are:
[tex]\frac{PQ}{JK}=\frac{QR}{KL}=\frac{RS}{LM}[/tex]
Replace the specified numbers in the aforementioned equation,
[tex]\frac{w}{25}=\frac{12}{25}=\frac{10}{x}[/tex]
Simplifying, we get:
w = 5/3 * 25
= 41.67 (approx)
x = 15/2 = 7.5
y = 25 * 7.5 / 15
= 12.5
As a result, PQ/JK = w/25 is the scale factor for PQRS to JKLM.
= 41.67/25
= 1.6667 (approx).
20. We can take the inverse of the scale factor of PQRS to JKLM to determine the scale factor of JKLM to PQRS. So, here we are:
JK/PQ = 1/(PQ/JK)
= 1/1.6667
= 0.6 (approx)
As a result, JK/PQ is equal to 0.6 when converting JKLM to PQRS. (approx).
21. To find the values of ti.. .r. and v, additional details or formulae are required.
22. We can sum up the side lengths of each polygon to determine its perimeter. So, here we are:
Perimeter of JKLM = KJ + JM + ML + LK
= 25 + y + x + 15
= y + x + 40
= 20 + 7.5 + 40
= 67.5
Perimeter of PQRS = PQ + QR + RS + SP
= w + 12 + 10 + 16
= w + 38
= 41.67 + 38
= 79.67 (approx)
As a result, the JKLM perimeter is 67.5 and the PQRS perimeter is 79.67 (approx).
23. By dividing the perimeters of the two systems, we can determine the percentage of the perimeters of PQRS and JKLM. So, here we are:
Ratio of the PQRS periphery to the JKLM perimeter = Perimeter of PQRS / Perimeter of JKLM = 79.67 / 67.5 = 1.18 (approx)
As a result, the PQRS perimeter's relationship to the JKLM perimeter is 1.18. (approx).
To know more about perimeter, visitL:
brainly.com/question/6465134
#SPJ1
Help I’ve tried so hard
Step-by-step explanation:
The points are 15 units apart
the FIRST expression shows this
Graph the image of V(
–
6,3) after a rotation 90° clockwise around the origin.
The graph of point V(-6,3) after a rotation 90° clockwise rotation around the origin is given below:
What is graph?
In mathematics, a graph is a visual representation of a set of objects, which are called vertices or nodes, connected by links or edges. A graph can be used to represent relationships or connections between objects in a clear and concise way.
To graph the image of point V(-6, 3) after a 90° clockwise rotation around the origin, we can use the following steps:
Draw the coordinate axes and plot the point V(-6, 3).Draw a perpendicular line from point V to the x-axis. This line represents the distance between the point and the x-axis.To rotate the point 90° clockwise around the origin, we need to swap the x and y coordinates and change the sign of the new x-coordinate. So, the new coordinates will be (3, 6).Plot the new point V' (3, 6) on the graph.Connect the points V and V' with a straight line to show the transformation.The graph of point V(-6, 3) and its image after a 90° clockwise rotation around the origin is shown below:
To learn more about graph visit:
https://brainly.com/question/26865
#SPJ1
What is the image of (−5,−9) after a dilation by a scale factor of
3 centered at the origin?
The image of (-5,-9) after dilation by a scale factor of 3 centered at the origin is (-15,-27).
What is the image of (−5,−9) after a dilation by a scale factor of 3 centered at the origin?To find the image of the point (-5,-9) after dilation by a scale factor of 3 centered at the origin.
We can use the following formula:
(x', y') = (kx, ky)
Where (x', y') are the coordinates of the dilated point, (x, y) are the coordinates of the original point, and k is the scale factor.
In this case, k = 3, and the coordinates of the original point are (-5,-9).
So we have:
x' = 3(-5) = -15
y' = 3(-9) = -27
Therefore, the image after dilation is (-15,-27).
Learn more about dilation here here: https://brainly.com/question/29840028
#SPJ1
Ms. Mazzei has a farm on 12 acres of land. She wants to create animal pens that are each 3/11 of an acre. How many pens can Ms. Mazzei have in the 12 acres?
Ms. Mazzei can have 44 animal pens in her 12 acres of land.
Describe Algebra?Algebra is a branch of mathematics that deals with the manipulation and properties of mathematical expressions, including variables and symbols representing numbers, as well as the rules governing their relationships and operations.
Algebraic equations typically involve variables, which are represented by letters or symbols, and are used to express relationships between different quantities or unknowns. These equations can be manipulated using algebraic operations such as addition, subtraction, multiplication, division, and exponentiation to solve for the value of the variables.
The study of algebra includes a wide range of topics, including linear algebra, abstract algebra, number theory, and algebraic geometry. It is a fundamental part of mathematics and plays a crucial role in many areas of modern science and technology.
To find the number of animal pens Ms. Mazzei can have in 12 acres of land, we need to divide the total area by the area of each pen:
Number of pens = Total area / Area of each pen
Total area = 12 acres
Area of each pen = 3/11 acres
Number of pens = 12 / (3/11)
Number of pens = 44
Therefore, Ms. Mazzei can have 44 animal pens in her 12 acres of land.
To know more about area visit:
https://brainly.com/question/23339317
#SPJ1
It takes 4 people 8 days to paint a wall. How long will it take for 8 people to finish the same wall?
Answer: 4 days
Step-by-step explanation:
If it takes 4 people 8 days to paint a wall. We can only assume that doubling the number of people would be 2 times as fast. So divide 8/2=4.
The area of a rectangle is found using the formula A=lw
, where l
is the length of the rectangle and w
is the width. Multiply each pair of factors and express the area of each rectangle as a single polynomial in terms of x
.
Question
l=x+14; w=3x+1
Answer:
The area of the rectangle is given by the formula A = lw. Substituting the given values, we get:
A = (x+14)(3x+1)
Expanding the expression, we get:
A = 3x^2 + x + 42x + 14
A = 3x^2 + 43x + 14
Therefore, the area of the rectangle is given by the polynomial expression 3x^2 + 43x + 14.
what is 63.92/9.4 in long division explanation
In long division, 63.92/9.4 results with quotient of 6.8.
What is long division explanation?Long division is a method of dividing two numbers by repeatedly subtracting the divisor from the dividend and keeping track of the resulting quotient and remainder. This method is often used when dividing two numbers with several digits. The process of long division involves several steps that are repeated until there is no remainder left or until a desired level of precision is achieved.
In long division, the dividend is the number being divided, and the divisor is the number by which the dividend is being divided. The quotient is the result of the division, and the remainder is the amount left over after the division is complete.
006.800
94 | 639.200
−0
63
−0
639
−564
752
−752
0
Thus, In long division, 63.92/9.4 results with quotient of 6.8.
Learn more about long division explanation
https://brainly.com/question/30951248
#SPJ1
This is a new version of the question. Make sure you start new workings.
Select all of the shapes below that are nets of a pentagonal-based pyramid.
Back to task
A
D
Watch video
B
Answ
The shapes that are nets of a pentagonal-based pyramid are shapes A and D.
What are properties of a pentagonal-based pyramid?A net of a pentagonal-based pyramid is a 2-dimensional pattern that can be folded into a 3-dimensional pentagonal-based pyramid. The net of a pentagonal-based pyramid has the following properties:
It consists of a regular pentagon as the base of the pyramid and five triangles that form the sides of the pyramid.The five triangles are congruent isosceles triangles.The apex of the pyramid is located at the center of the regular pentagon.Each triangle has one vertex at the apex of the pyramid and two vertices on the edges of the regular pentagon.The sum of the angles of each triangle is 180 degrees, and the sum of the angles of the regular pentagon is 540 degrees.The perimeter of the base of the pyramid is equal to five times the length of one side of the regular pentagon.The height of the pyramid is the perpendicular distance from the apex to the base, which can be found using the Pythagorean theorem.Learn more on pentagonal-based pyramid here: https://brainly.com/question/28226952
#SPJ1
You buy a circular rug with a diameter of 7 feet how much floor space for the rug cover
Step-by-step explanation:
All you need to do here is use the area of a circle equation!
So a=pi(r)^2
A=pi(7)^2
A=pi49
Area would be 49pi or about 153.938 feet^2. Hope this helps!
Answer:
The rug will cover
Step-by-step explanation:
1. h = 1.5 inches; r = 4 inches
2. h = 4 inches; r = 3 inches
(Volume problems for pi)
V=pir *2h
The volume of the first cylinder is 75.4 cubic inches and that of the second is 113.1 cubic inches.
What is volume of cylinder?Two parallel circular bases joined by a curving lateral surface make up the three-dimensional geometric object known as a cylinder. The area of one of a cylinder's circular bases is multiplied by one of its heights to determine the cylinder's volume. In other words, V = πr²h, where V is the cylinder's volume, r is the circumference of one of its circular bases, and h is the cylinder's height.
The volume of the cylinder is given as:
V = πr²h
First cylinder with h = 1.5 inches and r = 4 inches, the volume is:
V = π(4²)(1.5)
V = 24π
V ≈ 75.4 cubic inches
For h = 4 inches and r = 3 inches, the volume is:
V = π(3²)(4)
V = 36π
V ≈ 113.1 cubic inches
Hence, the volume of the first cylinder is 75.4 cubic inches and that of the second is 113.1 cubic inches.
Learn more about volume of cylinder here:
https://brainly.com/question/16788902
#SPJ1
The volume of the first cylinder is 75.4 cubic inches and that of the second is 113.1 cubic inches.
What is volume of cylinder?Two parallel circular bases joined by a curving lateral surface make up the three-dimensional geometric object known as a cylinder. The area of one of a cylinder's circular bases is multiplied by one of its heights to determine the cylinder's volume. In other words, V = πr²h, where V is the cylinder's volume, r is the circumference of one of its circular bases, and h is the cylinder's height.
The volume of the cylinder is given as:
[tex]V = \pi r^2h[/tex]
First cylinder with h = 1.5 inches and r = 4 inches, the volume is:
[tex]V = \pi (4^2)(1.5)[/tex]
V = 24π
V ≈ 75.4 cubic inches
For h = 4 inches and r = 3 inches, the volume is:
[tex]V = \pi (3^2)(4)[/tex]
[tex]V = 36\pi[/tex]
V ≈ 113.1 cubic inches
Hence, the volume of the first cylinder is 75.4 cubic inches and that of the second is 113.1 cubic inches.
Learn more about volume here:
https://brainly.com/question/1578538
#SPJ1
which of the following is most important in gathering data for use in statistical analysis? a. both efficiency and effectiveness are important when gathering data. b. the data should always be discarded immediately after gathering. c. the data should be gathered in an effective manner. d. the data should be gathered in an efficient manner.
The statement that is most important in gathering data for use in statistical analysis is option (a) Both efficiency and effectiveness are important when gathering data
Option a. Both efficiency and effectiveness are important when gathering data is the most appropriate answer.
Efficiency refers to the ability to gather data quickly and with minimal resources, while effectiveness refers to the ability to gather accurate and relevant data that is suitable for the intended analysis. Both of these factors are crucial in gathering data for statistical analysis.
Option b. The data should always be discarded immediately after gathering is incorrect because data is usually retained for further analysis and is not discarded immediately after gathering.
Option c. The data should be gathered in an effective manner is partially correct, but it does not address the importance of efficiency in the data gathering process.
Option d. The data should be gathered in an efficient manner is also partially correct, but it does not address the importance of effectiveness in the data gathering process.
Therefore, the correct option is (a) both efficiency and effectiveness are important when gathering data
Learn more about gathering data here
brainly.com/question/9964007
#SPJ4
what is the measurement of the third angle of a triangle if the other two angles each measures 45 degrees?
Answer: The answer is 90!
Step-by-step explanation:
A triangle's sides have to equal 180 degrees. The other two angles measure 45 degrees + 45 degrees, which equals 90. Now all you have to do is subtract 90 from 180. This equals 90, so the answer is 90 degrees.
Whenever you do problems like this in the future, remember these steps:
Angle 1 + Angle 2
180 - Combination of Angles 1 and 2 = Answer
The reason that you subtract from 180 degrees is because a straight angle is always 180 degrees. If you need more help with problems like these, I recommend watching some tutorials!
I hope this helped you!
The most important condition for making an inference about a population mean from a significance test is that the data contain no outliers. the data come from a random sample. the sample size is at least 30. the sample size is less than 10% of the population size. the population distribution is exactly Normal.
The most important condition for making an inference about a population mean from a significance test is that option (b) the data come from a random sample
A random sample is essential to ensure that the sample is representative of the population and that the statistical inference is valid. Other conditions, such as the absence of outliers, sample size, or population distribution, may also affect the validity of the inference, but they are not as crucial as the random sampling condition.
In practice, it is recommended to check for outliers, assess the sample size and the population distribution, and ensure other assumptions of the statistical test are met, such as the normality of the sampling distribution or the equal variance assumption, depending on the test used. However, the random sampling condition remains the most fundamental requirement.
Therefore, the correct option is (b) the data come from a random sample
Learn more about population mean here
brainly.com/question/30727743
#SPJ4
a circle is divided into 5 equal parts what is the measure of the angle that turns through 2 parts
The measure of the angle that turns through 2 parts of a circle divided into 5 equal parts is 144 degrees.
What is the circumference of a circle?
The circumference of a circle is the distance around its outer edge or boundary. It is the total length of the circular arc, which is the curved part of the circle.
The formula for the circumference of a circle is C = 2πr
If a circle is divided into 5 equal parts, each part corresponds to an angle of 360/5 = 72 degrees.
To find the measure of the angle that turns through 2 parts, we need to multiply 2 by 72 degrees:
2 parts x 72 degrees/part = 144 degrees
Hence, the measure of the angle that turns through 2 parts of a circle divided into 5 equal parts is 144 degrees.
To learn more about the circumference of the circle visit:
https://brainly.com/question/18571680
#SPJ1
1. Two linear equations are shown in the graph below. Enter the coordinates of these two linear
equations;
Answer:
y=-0.5x+2; y=3x-5
Step-by-step explanation:
First linear equation:
y=ax+b
A(0,2) B(4,0)
2=a*0+b
0=4*a+b
b=2
4a+b=0
4a+2=0
4a=-2
a=-0.5
y=-0.5x+2
Second linear equation:
y=cx+d
C(0,-5) D(2,1)
-5=c*0+d
1=c*2+d
d=-5
2c+d=1
2c-5=1
2c=6
c=3
y=3x-5
A public opinion poll in Ohio wants to determine whether registered voters support a recent school bond. They select a simple random sample of 50
registered voters from each county in the state and ask whether they approve or disapprove of the measure.
What is the population
What is the sample
Answer:
i hope this is what you are looking for
The population is all registered voters in Ohio, and the sample is the 50 registered voters from each county in Ohio that were randomly selected
Explanation:In this case, the population refers to all registered voters in Ohio, as they are the total group being studied. The sample is the subset of the population that is being evaluated to represent the entire population. In this question, the sample is the 50 registered voters from each county in Ohio that were randomly selected for the public opinion poll.
This scenario is an example of statistical sampling, a technique used in statistics to analyze a subset of a population and extrapolate insights or findings to the entire population.
Learn more about Statistical Sampling here:https://brainly.com/question/34640752
#SPJ12
Shawnee bought a shirt on sale that was 20% off of the original price. The original price was $5 more than the sale price. What was the original price? Use a model and check your work using the 80/20 rule.
A country road is 27 miles long and goes all the way around a lake, connecting the six cottages that are next to the lake. Two of the cottages are 1 mile apart (along the road). Two cottages are 2 miles apart, two are 3 miles apart, two are 4 miles apart, … two are 25 miles apart, and two are 26 miles apart. How are the cottages distributed along the road?
Using probability distribution, we can distribute the cottages as the follows along the road.
Define probability distribution?An experiment's potential outcomes are broken down into a probability distribution, which indicates the relative possibility of each one happening. For the purpose of describing a probability distribution, there are two key functions.
They are the cumulative distribution function and the probability density function, sometimes known as the probability mass function.
As the distance between each cottage and its neighbour is 1, 2, 3, 4, ... 25, or 26 miles, the entire length of the road that these distances occupy must equal 27 miles. The road links the six cottages, which explains why.
The cottages 1and 2 are separated by a mile, according to one conceivable distribution.
Similarly,
Two miles separate cottages 3 and 4.
Three miles separate cottages 5 and 6.
There are 4 miles between Cottages 1 and 3.
There are 5 miles between cottages 2 and 4.
There are 6 miles between cottages 3 and 5.
There are 7 miles between cottages 4 and 6.
Twenty-five miles separate cottages 1 and 6.
There are 26 miles between cottages 2 and 5.
By flipping the order of the cottage distances, a second potential distribution can be created. Which is:
There are 26 miles between cottages 2 and 5.
Twenty-five miles separate cottages 1 and 6.
There are 7 miles between cottages 4 and 6.
There are 6 miles between cottages 3 and 5.
There are 5 miles between cottages 2 and 4.
There are 4 miles between Cottages 1 and 3.
Three miles separate cottages 5 and 6.
Two miles separate cottages 3 and 4.
Two cottages 1 and 2 are one mile apart.
These two show that there are numerous ways to arrange the distances between the cottages while still adhering to the requirement that the distances must add to 27 miles, while there may be other alternative distributions.
To know more about probability distribution, visit:
https://brainly.com/question/29062095
#SPJ1
These two demonstrate that there are a variety of distributions for the distances between the cottages that still adhere to the requirement that the distances sum up to 27 miles.
Define probability distribution?The probability distribution of the possible results of an experiment shows the relative likelihood of each one occurring. There are two essential functions for defining a probability distribution.
They are the probability density function, also called the probability mass function, and the cumulative distribution function.
The total length of the road that these distances fill must be 27 miles because the distance between each cottage and its neighbor is 1, 2, 3, 4,... 25, or 26 miles. The six houses are connected by a road, which explains why.
According to one possible distribution, the distance between cottages 1 and 2 is one mile.
Similarly,
Cottages 3 and 4 are separated by two kilometers.
Cottages 5 and 6 are separated by three kilometers.
The distance between Cottages 1 and 3 is 4 kilometers.
The distance between houses 2 and 4 is 5 miles.
The distance between cottages 3 and 5 is six kilometers.
The distance between cottages 4 and 6 is seven kilometers.
The distance between houses 1 and 6 is 25 miles.
The distance between houses 2 and 5 is 26 miles.
It is possible to generate a second potential distribution by flipping the order of the cottage distances. That is:
The distance between houses 2 and 5 is 26 miles.
The distance between houses 1 and 6 is 25 miles.
The distance between cottages 4 and 6 is seven kilometers.
The distance between cottages 3 and 5 is six kilometers.
The distance between houses 2 and 4 is 5 miles.
The distance between Cottages 1 and 3 is 4 kilometers.
Cottages 5 and 6 are separated by three kilometers.
Cottages 3 and 4 are separated by two kilometers.
Two cottages 1 and 2 are one mile apart.
These two demonstrate that there are a variety of distributions for the distances between the cottages that still adhere to the requirement that the distances sum up to 27 miles.
To know more about probability distribution, visit:
brainly.com/question/29062095
#SPJ1
if a person is making the median salary for a construction worker, they are making more than what percentage of teachers? they are making more than % of teachers.
It's difficult to provide a precise answer to this question without knowing the specific median salary for a construction worker and the median salary for teachers in the same geographic area or region.
However, according to data from the Bureau of Labor Statistics (BLS) in the United States, the median annual salary for construction workers as of May 2020 was $38,970, while the median annual salary for elementary, middle, and high school teachers was $61,660. This means that a person making the median salary for a construction worker would be making less than approximately 37% of teachers.
It's important to note that this is a general comparison and the specific salaries can vary depending on factors such as location, years of experience, education level, and job responsibilities.
To know more about median
https://brainly.com/question/28060453
#SPJ4