monel metal is an alloy of nickel and copper that contains 28% copper. how many copper atoms are present in a 79 g sample of monel?

Answers

Answer 1

There are approximately 1.998 x 10^23 copper atoms in a 79 g sample of Monel.

Monel is an alloy of nickel and copper that contains 28% copper. This means that 100 g of the alloy contains 28 g of copper. To find the amount of copper in a 79 g sample of Monel, we can set up a proportion:

[tex]\dfrac{28\text{ g Cu}}{100\ g} = \dfrac{x\text{ g Cu}}{79\ g}[/tex]

Cross-multiplying, we get:

28 g Cu * 79 g = 100 g * x g Cu

Simplifying

x g Cu = (28 g Cu * 79 g) / 100 g

x g Cu = 22.12 g Cu

To find the number of copper atoms in this amount of copper, we can use Avogadro's number, which tells us the number of atoms in a mole of a substance:

1 mole Cu = 63.55 g Cu contains 6.022 x 10^23 atoms of Cu

Therefore, the number of copper atoms in 22.12 g of copper is:

(22.12 g Cu) / (63.55 g Cu/mol) * (6.022 x 10^23 atoms Cu/mol) = 1.998 x 10^23 atoms of Cu

To know more about alloy, here

brainly.com/question/18404834

#SPJ4


Related Questions

in the muscovite crystal, it was determined from potassium-40 and argon-40 that 2.2 half-lives had passed. what is the age of the muscovite crystal in billions of years(rounded to one decimal place)?

Answers

The age of the muscovite crystal is 0.86 billion years.

We can use the half-life formula to determine the age of the muscovite crystal. The half-life formula is given as:

N = N₀ (1/2)^t/T

Where N is the remaining quantity of a substance, N₀ is the original quantity, t is the time that has passed, and T is the half-life of the substance.

Substituting the given values, we get:

N/N₀ = (1/2)^(2.2)T (N₀/2^2.2) = N

The age of the muscovite crystal is given by t, which we can calculate using the following formula:

t = T * log (N₀/N)

Substituting the values of N₀ and N, we get:

t = 1.3 * 10^9 * log (1/2^2.2)t = 1.3 * 10^9 * log (1/4.59479342)

t = 1.3 * 10^9 * 0.662t = 860.6 million years

to know more about half-life refer here:

https://brainly.com/question/24710827#

#SPJ11

graphite is made up of layers of graphene. each layer of graphene is about 200 picometers, or meters, thick. how many layers of graphene are there in a 1.6-mm-thick piece of graphite? express your answer in scientific notation.

Answers

As a result, a 1.6-mm-thick slice of graphite has 8 106 layers of graphene. The solution is 8.0 1006. We can use unit conversions to solve this problem.

1 picometer (pm) = 1 × 10^-12 meters (m)

Therefore, 200 picometers (200 pm) = 200 × 10^-12 meters (m)

To find the number of layers of graphene in a 1.6-mm-thick piece of graphite, we need to divide the thickness of the graphite by the thickness of one layer of graphene:

1.6 mm = 1.6 × 10^-3 meters (m)

Number of layers of graphene = thickness of graphite / thickness of one layer of graphene

= (1.6 × 10^-3 m) / (200 × 10^-12 m)

= 8 × 10^6

Therefore, there are 8 × 10^6 layers of graphene in a 1.6-mm-thick piece of graphite. Expressed in scientific notation, the answer is 8.0 × 10^6.

To know more about scientific notation click here

brainly.com/question/18073768

#SPJ4

Which atom is a different element than the others

Answers


An element is the simplest form of a substance. Generally, it cannot be simplified or broken down further into smaller particles. An atom is part of an element.

The number of protons in an atom determines what element you have. For instance hydrogen has one proton, carbon has six.

magnesium ions form ioni bods with flouride ions in a 1:2 ratio.explain how eletrons are transferred between atoms and how the ionic bonds form in this compound

Answers

Total two electrons are transferred between atoms of magnesium and flourine. Ionic bond is formed between atoms by donating two electrons of magnesium atom to the two fluorine atoms.

Every element has atomic orbitals that contain a specific number of electrons . Out of these electrons, only outermost shell electrons of the atom participating in bond formation with another atom. We have a ratio of magnesium to fluoride ions, mole ratio = 1 : 2 , that one magnesium and two flourine atoms are there. Electronic configuration of Mg (12)

= 1s²2s²2p⁶3s²

Similarly, Electronic configuration of F (17)

= 1s²2s²2p⁶3s²3p⁵

Thus, the valency of Magnesium is two and Fluorine is one. Ionic compound is formed by magnesium cation and fluoride anion. Thus, magnesium'valence electrons (2 electrons) will be transferred completely to form an ionic bond with two fluorine atoms having 7 valence electrons each and form a MgF₂ molecule. The Lewis structure of MgF₂ compound is present in above figure.

To know more about ionic bond, refer :

https://brainly.com/question/977324

#SPJ4

How many moles are in 4392.3g ammonium sulfate?

Answers

Answer:

The molar mass of ammonium sulfate ((NH4)2SO4) is:

2 x (14.01 g/mol) (for the nitrogen atoms in the ammonium ions)

8 x (1.01 g/mol) (for the hydrogen atoms in the ammonium ions)

1 x (32.06 g/mol) (for the sulfur atom)

4 x (16.00 g/mol) (for the oxygen atoms in the sulfate ion)

= 132.14 g/mol

To convert the mass of 4392.3 g of ammonium sulfate to moles, we need to divide this mass by the molar mass:

moles = 4392.3 g / 132.14 g/mol

moles = 33.20 mol (rounded to two decimal places)

Therefore, there are 33.20 moles in 4392.3 g of ammonium sulfate.

33.20 mol are in 4392.3 g of ammonium sulfate. The mole designates  6.022×10²³  units, which is a very large number.

What is mole?

In chemistry, a mole, usually spelt mol, is a common scientific measurement unit for significant amounts of very small objects like atoms, molecules, or even other predetermined particles. The mole designates 6.022×10²³ units, which is a very large number. Under the International Units of Measure (SI), the mole is defined as this number as of May 20, 2019, according the General Meeting on Weights as well as Measurements.

The amount of atoms discovered through experimentation to be present in 12 grammes of carbon-12 was originally used to define the mole. In honour of a Italian scientist Amedeo Avogadro, the amount of cells inside a mole is also known as Avogadro's number or Avogadro's constant (1776–1856).

The molar mass of ammonium sulfate=2 x (14.01 g/mol)+8 x (1.01 g/mol)+1 x (32.06 g/mol)+4 x (16.00 g/mol) = 132.14 g/mol

moles = 4392.3 g / 132.14 g/mol

moles = 33.20 mol

Therefore, 33.20 mol are in 4392.3 g of ammonium sulfate. The mole designates  6.022×10²³  units, which is a very large number.

To know more about mole, here:

https://brainly.com/question/15209553

#SPJ2

suppose a metal oxide of formula m2o were soluble in water. what would be the major product or products of dissolving the substance in water?

Answers

The meta oxides when dissolved in water they gives us there ions as the major products of the dissolving substance.

When M₂O is mixed with water, it dissociates into ions because it is water soluble.

M2O → 2M⁺ + O⁻

The process of dissolving a gaseous, liquid, or solid solute in a solvent to form a solution is called dissolution. The maximum concentration of a solute that can be dissolved in a solvent at a given temperature is called solubility. A solution is said to be saturated when it contains the maximum amount of solute.

Ionic compounds dissolve in water if the energy released when the ions interact with water molecules offsets the energy needed to break ionic bonds in the solid and separate the water molecules, so that the ions can be dissolved.

To know more about dissolution of ions, visit,

https://brainly.com/question/15179787

#SPJ4

The calibration is to the 2mL, so we do not estimate another digit. What is the volume of liquid in the cylinder?

Answers

If the calibration is to 2 ml, calibration lines are marked on the cylinder every 2 ml. Therefore, we can calculate the liquid volume in the cylinder to the nearest 2 ml.

What does "calibration" signify in chemistry?

Calibration in chemistry is the process of ensuring that any scientific method or instrument produces accurate results. If the calibration is 2 ml, then there are calibration lines on the cylinder spaced 2 ml apart.

How does calibration work?

Formally, calibration is the process of comparing a measurement device that needs to be calibrated to a device or reference standard that can be tracked. The term "calibrator" may also be used to describe the reference standard. According to logic, the calibration of the instrument should be more precise than the reference standard.

To know more about calibration visit:-

https://brainly.com/question/31140467

#SPJ1

the citric aicd cycle. for each glucose molecule c6h12o6 oxidized by cellular reespiration, how many molecules of co2 are released in the citric acid cycle

Answers

In cellular respiration, one molecule of glucose (C6H12O6) is oxidized to produce energy in the form of ATP through a series of metabolic reactions, including the citric acid cycle.

During the citric acid cycle, acetyl-CoA, which is produced from the breakdown of glucose in earlier steps of cellular respiration, enters the cycle and reacts with oxaloacetate to form citrate. Through a series of enzymatic reactions, citrate is eventually converted back to oxaloacetate, producing CO2, NADH, FADH2, and ATP in the process.

For each glucose molecule oxidized by cellular respiration, two molecules of pyruvate are produced during glycolysis. Each pyruvate molecule then enters the mitochondria and is converted to one molecule of acetyl-CoA, which enters the citric acid cycle. Therefore, for each glucose molecule oxidized, two molecules of acetyl-CoA enter the citric acid cycle.

During the citric acid cycle, two molecules of CO2 are produced for each molecule of acetyl-CoA that enters the cycle. Therefore, for each glucose molecule oxidized by cellular respiration, a total of four molecules of CO2 are produced in the citric acid cycle (two for each acetyl-CoA molecule).

Learn more about Citric acid cycle here:

brainly.com/question/29857075

#SPJ4

g an element conducts electricity to some extent and tends to form molecular compounds. which is the most likely identity of the element?

Answers

The element that conducts electricity to some extent and tends to form molecular compounds is most likely a nonmetal

Nonmetals have high electronegativity and tend to gain or share electrons to form molecular compounds. Some examples of nonmetals include hydrogen, carbon, nitrogen, oxygen, fluorine, and chlorine. However, some nonmetals such as carbon and graphite can conduct electricity to some extent, making them useful in electronic devices.

Non-metals can be classified as insulators or semiconductors when it comes to electricity. Insulators are materials that do not conduct electricity well, while semiconductors are materials that conduct electricity better than insulators, but not as well as conductors.

Examples of non-metal insulators include rubber, glass, and plastic. These materials have high resistance to the flow of electric current and are used as electrical insulation in wiring and electronic components.

Semiconductor non-metals include materials such as silicon, germanium, and carbon. They have electrical conductivity that is intermediate between that of a conductor and an insulator. These materials are used in electronic devices such as transistors, integrated circuits, and solar cells

learn more about molecular compound here: brainly.com/question/14446156

#SPJ4

what is the iupac name for the following compound? select answer from the options below 3,4-dichloroaniline 2,4-dichloroaniline 2,5-dichloroaniline 3,6-dichloroaniline 2,6-dichloroaniline

Answers

The iupac name for the following compound is 3,6-dichloroaniline. Option d is correct choice.

The IUPAC name of a compound is a systematic name that follows a set of rules defined by the International Union of Pure and Applied Chemistry (IUPAC). In the case of the given compound with two chlorine atoms and an amino group attached to a benzene ring, the correct IUPAC name is based on the positions of the chlorine atoms relative to the amino group.

To name the compound, we need to number the carbons in the benzene ring starting from one of the carbons adjacent to the amino group. The positions of the two chlorine atoms are then indicated by their numbers, separated by a comma, before the name of the parent compound, which is "aniline" in this case.

By following this procedure, we can see that the correct IUPAC name for the compound is 3,6-dichloroaniline, as the chlorine atoms are located at positions 3 and 6 relative to the amino group. Hence option d is correct choice.

To know more about IUPAC name, here

brainly.com/question/12150493

#SPJ4

There are several ways to optimize metal extraction. Which way also optimizes environmental impact? (1 point)
O using enormous trucks to carry larger loads
O sifting ore at the site before transporting
O crushing only the best quality ore
O dumping waste rock near the plant

Answers

C. "Sifting ore at the site before transporting" is the way that optimizes environmental impact.

This method can help to reduce the amount of waste material that needs to be transported and processed, which in turn reduces the environmental impact associated with mining operations, such as land degradation, soil erosion, and water pollution. By removing unwanted materials from the ore at the site, the amount of waste material generated can be reduced, which can also save energy and lower greenhouse gas emissions associated with transportation and processing.

What is an ore?

An ore is a naturally occurring mineral or rock that contains a valuable substance that can be extracted at a profit. Ores typically contain metals, such as copper, iron, gold, silver, and aluminum, or non-metallic minerals, such as phosphate, limestone, and sulfur.

The valuable substance in an ore is usually present in relatively high concentrations compared to other minerals in the rock or mineral deposit, and can be extracted through mining and processing using various methods, such as smelting, leaching, and refining. The identification and extraction of ores have been a vital part of human civilization for thousands of years, and the discovery of new ores and improved extraction methods have played an important role in shaping the development of technology, industry, and society.

To know more about ore, visit:

https://brainly.com/question/89259

#SPJ1

Complete question is: C. "Sifting ore at the site before transporting" is the way that optimizes environmental impact.

he partial pressure of carbon dioxide is 45 mm hg in the blood and 40 mm hg in the alveoli. what happens to the carbon dioxide?

Answers

b) It diffuses into the alveoli is the correct option. The gas goes from a higher partial pressure to a lower partial pressure along its own gradient.

The partial pressure of CO2 at the blood is thus 45 mm Hg and at the alveoli is 40 mm Hg. After then, CO2 travels from the blood to the alveoli.  In this mechanism, CO2 cannot be broken down into carbon and oxygen. Compared to O2, CO2 is more soluble in blood. For CO2 diffusion, a very small partial pressure gradient is required. It just takes a 5-mmHg pressure gradient for CO2 gas to diffuse. Hence, CO2 will transfer from blood into alveoli.

Learn more about alveoli here:

https://brainly.com/question/18837652

#SPJ4

Complete Question:

The partial pressure of carbon dioxide is 45 mm Hg in the blood and 40 mm Hg in the alveoli. What happens to the carbon dioxide?

a) It diffuses into the blood.

b) It diffuses into the alveoli.

c) The gradient is too small for carbon dioxide to diffuse.

d) It decomposes into carbon and oxygen

YA'LL ARE SMART PLS HELP!! I will mark brainliest!!

Mg + 2 HCl ➞ MgCl2 + H2
2.26 moles of HCl are reacted how many grams of Mg were used in the reaction??

Answers

Answer: 24.31g/mol

Explanation:

The correct answer is To determine the mass of Mg used in the reaction, we need to know the number of moles of Mg that reacted with the 2.26 moles of HCl. To do this, we can use the mole ratio from the balanced chemical equation:

Mg + 2 HCl → MgCl2 + H2 According to the stoichiometry of this equation, 1 mole of Mg reacts. With 2 moles of HCl to produce 1 mole of MgCl2 and 1 mole of H2. Therefore, to determine the amount of Mg used in the reaction, we need to first calculate the number of moles of HCl that reacted, and then use the mole ratio between Mg and HCl to find the number of moles of Mg. Given that 2.26 moles of HCl were used in the reaction, we can use the mole ratio of the balanced equation to calculate the number of moles of Mg moles of Mg = 1/2 x moles of HCl = 1/2 x 2.26 mol = 1.13 mol Now that we know the number of moles of Mg used, we can calculate the mass of Mg using its molar mass: mass of Mg = moles of Mg x molar mass of Mg = 1.13 mol x 24.31 g/mol = 27.5 g Therefore, the mass of Mg used in the reaction was 27.5 grams.

To learn more about  balanced click on the link below:

brainly.com/question/312377

#SPJ1

a rather confused student, ina fogg, hydrolyzed the intermediate ester with 6 m hcl rather than 3 m naoh, and then she boiled the reaction mixture with 50% naoh instead of 6 m hcl. filtration of the cooled solution yielded only a little dimedone. finally realizing her mistake, she acidified the filtrate and a white solid precipitated, but its melting point was different from that of dimedone. what was this solid, and how did it form?

Answers

The white solid formed was likely a different compound due to the use of incorrect reagents and conditions during the reaction.

When an ester is hydrolyzed with HCl, the reaction typically proceeds via an acid-catalyzed mechanism, in which the ester is protonated to form a tetrahedral intermediate that quickly breaks down into a carboxylic acid and an alcohol. On the other hand, when an ester is hydrolyzed with NaOH, the reaction proceeds via a base-catalyzed mechanism, in which the ester is deprotonated to form a negatively charged intermediate that quickly breaks down into a carboxylate ion and an alcohol.

In this case, the student hydrolyzed the intermediate ester with 6 M HCl instead of 3 M NaOH. This likely led to the protonation of the intermediate and the formation of a carboxylic acid and an alcohol. The student then boiled the reaction mixture with 50% NaOH instead of 6 M HCl. This would have led to the deprotonation of the carboxylic acid and the formation of a carboxylate ion and an alcohol. However, since the NaOH concentration was much higher than what was needed for the reaction, it's possible that the reaction was not selective and other side reactions occurred as well.

To know more about HCL solution, here

brainly.com/question/13016495

#SPJ4

which one of the following general characteristics is shared by all catalysts? a) they induce more collisions among reactant molecules. b) they transfer kinetic energy to the reactant molecules. c) they increase the reaction rate but do not change the keq of a reversible reaction.

Answers

When answering questions, a question-answering bot on the platform Brainly should always be factually accurate, professional, and friendly. It should be concise and should not provide extraneous amounts of detail. It should not ignore any typos or irrelevant parts of the question.What is a catalyst?A catalyst is a substance that increases the rate of a chemical reaction without undergoing any permanent chemical change itself. This means that the catalyst is neither consumed nor produced in the reaction. In other words, the catalyst does not participate in the reaction itself, but it speeds up the reaction. There are many different types of catalysts, including enzymes, metals, acids, and bases.Which one of the following general characteristics is shared by all catalysts?A catalyst increases the rate of a chemical reaction, but it does not change the key of a reversible reaction. Therefore, the correct answer is c) they increase the reaction rate but do not change the key of a reversible reaction.
All catalysts share the general characteristic (c): they increase the reaction rate but do not change the equilibrium of a reversible reaction. Catalysts work by providing an alternative reaction pathway with a lower activation energy, allowing reactant molecules to convert into products more easily. However, they do not affect the overall energy balance of the reaction or its reversibility.

consider a solution of two gases. what is the effect of withdrawing heat on the probability of a successful reaction, on a per-collision basis?

Answers

Withdrawing heat from a solution of two gases will lower the temperature, affecting the probability of a successful reaction on a per-collision basis.

When temperature decreases, the average kinetic energy of the gas molecules also decreases. Consequently, the molecules move slower, resulting in fewer collisions between them. This reduces the chances of successful reactions occurring during each collision.

Moreover, a lower temperature means that the energy barrier for a reaction, known as activation energy, becomes relatively higher compared to the average kinetic energy of the molecules. Activation energy is the minimum amount of energy required for a reaction to occur.


The reaction rate, which is the speed at which a reaction proceeds, is influenced by temperature. The Arrhenius equation, which quantifies the relationship between temperature and reaction rate, shows that a decrease in temperature results in a slower reaction rate.

Know more about collisions    here:

https://brainly.com/question/12644900

#SPJ11

you prepare a solution by mixing 15 grams of sucrose with 85 grams of water. what is the percent mass of sucrose in your solution? % mass (b) you prepare a solution by mixing 30 ml of chloroform with 45 ml of water. what is the percent volume of chloroform in your solution? % volume

Answers

A solution by mixing 15 grams of sucrose with 85 grams of water. (a), The percent mass of sucrose in your solution is 15%. (b)The percent volume of chloroform in your solution is 40%.

(a) To find the percent mass of sucrose in the solution, follow these steps:
1. Calculate the total mass of the solution by adding the mass of sucrose and water:
  Total mass = mass of sucrose + mass of water
  Total mass = 15 grams + 85 grams = 100 grams
2. Calculate the percent mass of sucrose using the formula:
  % mass = (mass of sucrose / total mass) × 100
  % mass = (15 grams / 100 grams) × 100 = 15%
The percent mass of sucrose in your solution is 15%.
(b) To find the percent volume of chloroform in the solution, follow these steps:
1. Calculate the total volume of the solution by adding the volume of chloroform and water:
  Total volume = volume of chloroform + volume of water
  Total volume = 30 mL + 45 mL = 75 mL
2. Calculate the percent volume of chloroform using the formula:
  % volume = (volume of chloroform / total volume) × 100
  % volume = (30 mL / 75 mL) × 100 = 40%
The percent volume of chloroform in your solution is 40%.

For more such questions on solution

brainly.com/question/26528084

#SPJ11

which of the following examples from the living world exhibit well-designed structures supporting well-designed functions? group of answer choices a squirrel stripping open a sun flower seed an otter breaking into a mussel shell with a pebble a molecule of the correct dimensions storing information an enzyme breaks a specific covalent bond to generate a specific molecular product. all of the above.

Answers

All of the examples listed could be considered to exhibit well-designed structures supporting well-designed functions, but the level at which they are designed may differ.

A squirrel's teeth and jaws are well-designed structures that allow them to strip open sunflower seeds, which is a well-designed function for obtaining food. Similarly, an otter's use of a pebble as a tool to break into a mussel shell is also an example of well-designed structures supporting well-designed functions.

A molecule of the correct dimensions storing information is an example of a well-designed structure at the molecular level that supports the well-designed function of storing genetic information. Likewise, enzymes are also well-designed structures that catalyze specific chemical reactions, and the breaking of a specific covalent bond to generate a specific molecular product is an example of a well-designed function.

Therefore, the correct answer is: all of the above.

For more questions like enzyme visit the link below:

https://brainly.com/question/30001903

#SPJ11

dinitrogen monoxide gas is collected at in an evacuated flask with a measured volume of . when all the gas has been collected, the pressure in the flask is measured to be . calculate the mass and number of moles of dinitrogen monoxide gas that were collected. round your answer to significant digits.

Answers

Once you have the correct values for pressure, volume, and temperature, follow these following steps to calculate the mass and number of moles of dinitrogen monoxide gas collected.

To calculate the mass and number of moles of dinitrogen monoxide gas collected, we will use the ideal gas law equation:
PV = nRT
where:
P = pressure in the flask
V = measured volume of the flask
n = number of moles of gas
R = ideal gas constant (0.0821 L atm / K mol)
T =temperature in Kelvin
However, the student question did not provide values for the pressure, volume, or temperature. Assuming that you have these values, you can proceed as follows:
1. Convert the given temperature to Kelvin if it's in Celsius (K = °C + 273.15).
2. Plug in the given values for P, V, and T into the ideal gas law equation
3. Solve for n (number of moles):
n = PV / RT
4. Calculate the mass of dinitrogen monoxide (N₂O) gas using the molar mass (44.013 g/mol):
mass = n × molar mass
5. Round your answers to the appropriate significant digits.

For more such questions on dinitrogen monoxide

brainly.com/question/14847163

#SPJ11

What are the following organic molecules.

Answers

Answer: [1 ]      3-ethyl- 1,1-dimethyl-cyclohexane

              [2]       1-methyl-ethoxy-propanol

               [3]      4-oxo-pentan-2-one

               [4]      2-ethyl-4-hydroxy-3-methyl-pentanoic acid

Explanation:

A 0.5998 g sample of a new compound has been analyzed and found to contain the following masses of elements: carbon, 0.1565 g; hydrogen, 0.02627 g; oxygen, 0.4170 g. Calculate the empirical formula of the compound.

Answers

The empirical formula of the compound is CH2O.

To find the empirical formula of the compound, we need to determine the ratios of the atoms in the compound. To do this, we need to find the number of moles of each element present in the compound.

The molar mass of carbon is 12.01 g/mol, the molar mass of hydrogen is 1.008 g/mol, and the molar mass of oxygen is 16.00 g/mol. The number of moles of carbon in the sample is:0.1565 g × 1 mol/12.01 g ≈ 0.0130 mol. The number of moles of hydrogen in the sample is:0.02627 g × 1 mol/1.008 g ≈ 0.0261 molThe number of moles of oxygen in the sample is:

0.4170 g × 1 mol/16.00 g ≈ 0.0261 mol

Now that we know the number of moles of each element, we can determine the simplest whole number ratio of the elements in the compound. We can do this by dividing each number of moles by the smallest number of moles. In this case, the smallest number of moles is 0.0130 mol.

We get:

Carbon: 0.0130 mol ÷ 0.0130 mol = 1

Hydrogen: 0.0261 mol ÷ 0.0130 mol = 2

Oxygen: 0.0261 mol ÷ 0.0130 mol = 2

for more such questions on empirical formula

https://brainly.com/question/16253224

#SPJ11

if the molar enthalpy of solution for calcium carbonate is -25.3 kj/mol, what mass of calcium carbonate would you need to have the same effect on the temperature of water as the 5g of calcium chloride

Answers

You would need 4.504g of calcium carbonate to have the same effect on the temperature of the water as 5g of calcium chloride.

To determine the mass of calcium carbonate needed to have the same effect on the temperature of the water as 5g of calcium chloride, we'll follow these steps:

1. Calculate the moles of calcium chloride.
2. Determine the energy change caused by 5g of calcium chloride.
3. Calculate the moles of calcium carbonate needed to cause the same energy change.
4. Determine the mass of calcium carbonate.

Step 1: Calculate the moles of calcium chloride.

Moles = mass / molar mass
The molar mass of calcium chloride (CaCl2) is 40.08 (Ca) + 2 * 35.45 (Cl) = 110.98 g/mol.
Moles of CaCl2 = 5g / 110.98 g/mol = 0.0450 mol

Step 2: Determine the energy change caused by 5g of calcium chloride.
Energy change = moles * molar enthalpy of solution
Energy change = 0.0450 mol * -25.3 kJ/mol = -1.1385 kJ

Step 3: Calculate the moles of calcium carbonate needed to cause the same energy change.
Moles of CaCO3 = Energy change / molar enthalpy of solution
Moles of CaCO3 = -1.1385 kJ / -25.3 kJ/mol = 0.0450 mol

Step 4: Determine the mass of calcium carbonate.
Mass = moles * molar mass
The molar mass of calcium carbonate (CaCO3) is 40.08 (Ca) + 12.01 (C) + 3 * 16.00 (O) = 100.09 g/mol.
Mass of CaCO3 = 0.0450 mol * 100.09 g/mol = 4.504 g

to know more about energy change refer here:

https://brainly.com/question/22255429#

#SPJ11

identify the relationship in the following pair. do the drawings represent constitutional isomers or stereoisomers, or are they just different ways of drawing the same compound? if they are stereoisomers, are they enantiomers or diastereomers?

Answers

The following drawings depict enantiomers or diastereomers:

A Diastereomers

B. Enantiomers

C. Diastereomers

D. Diastereomers

E. Enantiomers

F. Diastereomers

G. Enantiomers

H. Diastereomers

I. Enantiomers

J. Enantiomers

Enantiomers and diastereomers are two types of stereoisomers, which are molecules that have the same molecular formula and connectivity but differ in their three-dimensional arrangement of atoms in space. Enantiomers are mirror images of each other and cannot be superimposed on each other, like a left and right hand. They have identical physical and chemical properties, except for the way they interact with polarized light.

Enantiomers rotate plane-polarized light in opposite directions and are therefore called optical isomers. Diastereomers, on the other hand, are stereoisomers that are not mirror images of each other and can be distinguished by their physical and chemical properties. Unlike enantiomers, diastereomers do not rotate plane-polarized light in opposite directions. They have different melting and boiling points, solubilities, and reactivities.

The complete question

Identify the relationship in each of the following pairs. Do the drawings(image attached) represent constitutional isomers or stereoisomers, or are they just different ways of drawing the same compound? If they are stereoisomers, are they enantiomers or diastereomers?

To know more about the Stereoisomers, here

https://brainly.com/question/25324769

#SPJ4

Define a daughter element

Answers

Answer:

A daughter element is the element formed when a radioactive element undergoes radioactive decay

Explanation:

may I get brainliest thanks

Help what's the answer??

Answers

Theoretical yield of iron (III) oxide is 4.92 g ; percent yield for this reaction is approximately 73.3%.

What is meant by theoretical yield?

Quantity of a product obtained from reaction is expressed in terms of yield of the reaction. Amount of product predicted by stoichiometry is called theoretical yield and whereas amount obtained actually is called  actual yield.

Balanced chemical equation for the reaction is: 4Fe + 3O₂→ 2Fe₂O₃

Molar mass of Fe = 55.85 g/mol

So, Number of moles of Fe = mass/molar mass = 3.44 g/55.85 g/mol = 0.0615 mol

and Number of moles of Fe₂O₃ = 0.0615 mol Fe × (2 mol Fe₂O₃/4 mol Fe) = 0.0308 mol Fe₂O₃

Molar mass of Fe2O3 = 159.69 g/mol

Theoretical yield of Fe₂O₃ = number of moles × molar mass = 0.0308 mol × 159.69 g/mol = 4.92 g

Therefore, theoretical yield of iron (III) oxide is 4.92 g.

As percent yield = (actual yield / theoretical yield) x 100%

So, percent yield = (4.32 g / 5.89 g) x 100% ≈ 73.3%

Therefore,  percent yield for this reaction is approximately 73.3%.

To know more about theoretical yield, refer

https://brainly.com/question/25996347

#SPJ1

if a gas displays a solubility of 0.00290m at a partial pressure of 125 kpa, what is the proportionality constant for this gas in this solvent and at this temperature? your answer should have three significant figures.

Answers

The proportionality constant for this gas in this solvent and at this temperature is approximately 0.0000233 M/kPa.

To find the proportionality constant for the gas in the solvent and at the given temperature, we need to use Henry's Law, which states that the solubility of a gas in a liquid is directly proportional to the partial pressure of the gas above the liquid. Mathematically, it is expressed as:

C = k * P

where C is the solubility of the gas (in this case, 0.00290 M), P is the partial pressure of the gas (125 kPa), and k is the proportionality constant that we need to find.

To find the value of k, we can rearrange the equation:

k = C / P

Now, plug in the given values for C and P:

k = 0.00290 M / 125 kPa

Next, divide the solubility by the partial pressure to find the proportionality constant:

k ≈ 0.0000232 M/kPa

Finally, to express the answer with three significant figures, round the value:

k ≈ 0.0000233 M/kPa

for more questions on proportionality :

https://brainly.com/question/2689962

#SPJ11

Which shows the correct order of steps during the formation of an ionic bond?a. ions are attracted to each other → electrons are transferred → an ionic compound forms b. an ionic compound forms → ions are attracted to each other → electrons are transferred c. electrons are transferred → ions form → ions are attracted to each other d. ions form → electrons are transferred → ions are attracted to each other

Answers

The correct order of steps during the formation of an ionic bond is:

c. electrons are transferred → ions form → ions are attracted to each other.

This means that first, electrons are transferred from one atom to another to form ions with opposite charges. Then, these ions are attracted to each other by electrostatic forces, resulting in the formation of an ionic compound.

Option (a) is incorrect because it shows the attraction of ions occurring before the transfer of electrons.

Option (b) is incorrect because it shows the formation of an ionic compound occurring before the attraction of ions.

Option (d) is incorrect because it shows the attraction of ions occurring after the transfer of electrons.

For more question on ionic bond click on

https://brainly.com/question/957239

#SPJ11

does the freezing point depression equal the freezing point of pure solution minus the freezing point of the solution

Answers

No, the freezing point depression does not equal the freezing point of the pure solvent minus the freezing point of the solution.

The freezing point depression is defined as the difference between the freezing point of the pure solvent and the freezing point of the solution. In other words, it is the amount by which the freezing point of the solvent is lowered when a solute is added to it.

The freezing point depression is related to the concentration of the solute in the solution, as well as the properties of the solvent and solute. The greater the concentration of the solute, the greater the freezing point depression.

The relationship between freezing point depression, solute concentration, and solvent properties is described by the equation ΔTf = Kf·m, where ΔTf is the freezing point depression, Kf is the freezing point depression constant of the solvent, and m is the molality of the solute in the solution.

In summary, the freezing point depression is not equal to the freezing point of the pure solvent minus the freezing point of the solution, but rather the difference between the freezing point of the pure solvent and the freezing point of the solution, and is related to the concentration of the solute in the solution.

To learn more about freezing point

https://brainly.com/question/3121416

#SPJ4

-If the experimental (actual yield) is 17.0 grams what is the yield

Answers

If the theoretical yield is 20 grams and the actual yield is 17 grams, the percent yield would be 85%.

How are yields in grams calculated?

To get the mass per mole, divide the reactant's mass by its molecular weight. As an alternative, we can multiply the millilitres of the reactant solution by the grams per millilitre of the liquid solution.

Once you have the theoretical yield, you can use the following formula to calculate the percent yield:

percent yield = (actual yield / theoretical yield) x 100%

For example, if the theoretical yield is 20 grams and the actual yield is 17 grams, the percent yield would be:

percent yield = (17 grams / 20 grams) x 100% = 85%

To know more about theoretical yield visit:-

https://brainly.com/question/14966377

#SPJ9

substance a has molecules that attract with london dispersion attraction, and substance b has molecules that attract with dipole-dipole attraction. which one will have the higher boiling point?

Answers

The substance B will have a higher boiling point.

When we talk about substances, they have different physical and chemical properties, such as melting point, boiling point, density, etc. These properties depend on different factors such as intermolecular forces, molecular mass, etc. The given question is asking about the boiling point of two different substances, one that has molecules that attract with London Dispersion attraction and the other with Dipole-Dipole attraction.

London Dispersion Attraction: London Dispersion force is a temporary attractive force that occurs between the atoms or molecules of nonpolar compounds. It is a type of Van der Waals force that arises due to instantaneous dipoles that arise in the electron clouds of the molecules. These forces are very weak and short-range.

Dipole-Dipole Attraction: Dipole-dipole attraction is an attractive force that occurs between the oppositely charged ends of polar molecules. This force is stronger than London dispersion forces because it involves two dipoles, and it is a long-range force.Now, to answer the question, we need to see which of these forces is stronger. We know that London Dispersion forces are weaker than Dipole-Dipole forces.

Therefore, substance B, which has molecules that attract with Dipole-Dipole attraction, will have a higher boiling point than substance A, which has molecules that attract with London Dispersion attraction. Thus, the boiling point of a substance depends on the type of intermolecular force it has.

for more such questions on boiling point :

https://brainly.com/question/27349376

#SPJ11

Other Questions
I need this by the hour Based on paragraphs 26-27, what distinction can you make between what makes children laugh and what makes adults laugh? Why might children laugh more often than adults? discuss a relevant governmental regulation Find the third and first quartile of the data: 0 0 1 6 9 9 10 11 11 12 13 14 15 15 21 22 Use the drop-down menus to identify the components of your essay.Format: ( INFORMATIVE ESSAY )Topic: ( GLOBALIZATION AND PULLUTION )Purpose: ( TO EDUCATE )JUST GOT THEM RIGHT!!! ON EDGE. what are two complications or risks of failure that can arise from gathering data from six different operational databases covering six riverboat gambling casinos and hotels? what might be done to minimize each one. find the value of x that makes [tex]\frac{8^{3x} }{8^{2x+1} } =8^{9}[/tex] true. michael's, incorporated, just paid $1.80 to its shareholders as the annual dividend. simultaneously, the company announced that future dividends will be increasing by 4 percent. if you require a rate of return of 8.2 percent, how much are you willing to pay today to purchase one share of the company's stock? factor the expression using the gcf, 144+216 Read the two literary excerpts. Then respond to the essay question that follows.from Moby Di** by Herman Melville But even stripped of these supernatural surmisings, there was enough in the earthly make and incontestable character of the monster to strike the imagination with unwonted power. For, it was not so much his uncommon bulk that so much distinguished him from other sperm whales, but, as was elsewhere thrown outa peculiar snow-white wrinkled forehead, and a high, pyramidical white hump. These were his prominent features; the tokens whereby, even in the limitless, uncharted seas, he revealed his identity, at a long distance, to those who knew him. The rest of his body was so streaked, and spotted, and marbled with the same shrouded hue, that, in the end, he had gained his distinctive appellation of the White Whale; a name, indeed, literally justified by his vivid aspect, when seen gliding at high noon through a dark blue sea, leaving a milky-way wake of creamy foam, all spangled with golden gleamings. Nor was it his unwonted magnitude, nor his remarkable hue, nor yet his deformed lower jaw, that so much invested the whale with natural terror, as that unexampled, intelligent malignity which, according to specific accounts, he had over and over again evinced in his assaults. More than all, his treacherous retreats struck more of dismay than perhaps aught else. For, when swimming before his exulting pursuers, with every apparent symptom of alarm, he had several times been known to turn round suddenly, and, bearing down upon them, either stave their boats to splinters, or drive them back in consternation to their ship. Already several fatalities had attended his chase. But though similar disasters, however little bruited ashore, were by no means unusual in the fishery; yet, in most instances, such seemed the White Whale's infernal aforethought of ferocity, that every dismembering or death that he caused, was not wholly regarded as having been inflicted by an unintelligent agent.from The Old Man and the Sea by Ernest Hemingway His back was as blue as a sword fish's and his belly was silver and his hide was smooth and handsome. He was built as a sword fish except for his huge jaws which were tight shut now as he swam fast, just under the surface with his high dorsal fin knifing through the water without wavering. Inside the closed double lip of his jaws all of his eight rows of teeth were slanted inwards. They were not the ordinary pyramid-shaped teeth of most sharks. They were shaped like a man's fingers when they are crisped like claws. They were nearly as long as the fingers of the old man and they had razor-sharp cutting edges on both sides. This was a fish built to feed on all the fishes in the sea, that were so fast and strong and well-armed that they had no other enemy. Now he speeded up as he smelled the fresher scent and his blue dorsal fin cut the water. When the old man saw him coming he knew that this was a shark that had no fear at all and would do exactly what he wished. He prepared the harpoon and made the rope fast while he watched the shark come on. The rope was short as it lacked what he had cut away to lash the fish. The old man's head was clear and good now and he was full of resolution but he had little hope. It was too good to last, he thought. He took one look at the great fish as he watched the shark close in. It might as well have been a dream, he thought. I cannot keep him from hitting me but maybe I can get him. The shark swung over and the old man saw his eye was not alive and then he swung over once again, wrapping himself in two loops of the rope. The old man knew that he was dead but the shark would not accept it. Then, on his back, with his tail lashing and his jaws clicking, the shark plowed over the water as a speed-boat does. The water was white where his tail beat it and three-quarters of his body was clear above the water when the rope came taut, shivered, and then snapped. The shark lay quietly for a little while on the surface and the old man watched him. Then he went down very slowly.In a well-written paragraph of 57 sentences, achieve the following:Explain the difference in the two authors' styles when writing about the same topic.Use textual evidence to support your response. I, ABRAHAM LINCOLN, President of the United States of America, and Commander-in-Chief of the Army and Navy thereof, do hereby proclaim and declare that hereafter, as heretofore, the war will be prosecuted for the object of practically restoring the constitutional relation between the United States, and each of the States, and the people thereof, in which States that relation is, or may be, suspended or disturbed.That on the first day of January in the year of our Lord, one thousand eight hundred and sixty-three, all persons held as slaves within any State, or designated part of a State, the people whereof shall then be in rebellion against the United States shall be then, thenceforward, and forever free; and the executive government of the United States, including the military and naval authority thereof, will recognize and maintain the freedom of such persons, and will do no act or acts to repress such persons, or any of them, in any efforts they may make for their actual freedom.That the executive will, on the first day of January aforesaid, by proclamation, designate the States, and part of States, if any, in which the people thereof respectively, shall then be in rebellion against the United States; and the fact that any State, or the people thereof shall, on that day be, in good faith represented in the Congress of the United States, by members chosen thereto, at elections wherein a majority of the qualified voters of such State shall have participated, shall, in the absence of strong countervailing testimony, be deemed conclusive evidence that such State and the people thereof, are not then in rebellion against the United States.Use context to determine the meaning of the word in bold.ConfusingExpensiveConfirmedExtravagant Is the reaction as written endo or exothermic? How did you come to this conclusion?[Co(H2O)6]2+(aq) + 4Cl-(aq) [CoCl4]2-(aq) + 6H2O(l) Help which one I am very confused Some solar panels have a total area of 12 m2 . Each 1.0 m2 of the panels receives 0.85 kJ of energy from the Sun in 1.0 s. The efficiency of the panels is 16%. How much power do they produce? page 1 of 2In Target One Fractions, players choose three numbers to create a whole number anda fraction that have a product close to 1. Their score is the difference between theirproduct and 1, and the lowest score wins the round.1 Erica is playing Target One Fractions. She has these cards: 1, 2, 3, 4, 6.a Which three cards should she choose to make a whole number and a fractionthat have a product close to 1?62/3b Write an expression for the problem Erica will solve.2/34=4c Solve the problem.6=2b = 6 c=30r a=3,5=60-ad What is Erica's score for this round? BE CREATIVE! Some collective nouns are very descriptive. We hear the collective noun and we can imagine what the group looks like. A pride of lions sounds more interesting than a group of lions. Collective nouns are also fun!Directions: Now that you have learned how to use collective nouns, try and invent one of your own. Invent a creative collective noun and then use your collective noun in a sentence.Example: students - babbleWe were surrounded by a babble of students. please pick one answer from the picture 1 - 4members of many different ethnic groups live in ____15 points What is the purpose of a Creative Commons license? (50 words or more) one year ago, the jenkins family fun center deposited $4,200 into an investment account for the purpose of buying new equipment four years from today. today, they are adding another $6,000 to this account. they plan on making a final deposit of $8,200 to the account next year. how much will be available when they are ready to buy the equipment, assuming they earn a rate of return of 5 percent? I NEED HELP ON THIS ASAP!!! Jamal is a studentin the health careprofessions class.He had a veryexciting day atclinical anddecided to postabout it on hissocial mediaaccount. Heposted thefollowing "Greatday saving livestoday! I did CPRand saved the