Missy Diwater, the former platform diver for the Ringling Brothers' Circus had a kinetic energy of 13,700J just prior to hitting the bucket of water. If Missy's mass is 55kg, then what was her velocity at that moment?

The process produces heat.Hydrochloric acid generates bubbles when a strip containing zinc metal is introduced to the test tube, and the tube gets warm.The hydrogen gas forms, which causes the bubbles.The reaction then produces heat.

Hydrogen gas and zinc chloride are produced quickly by the reaction of zinc with hydrochloric acid.In a single displacement reaction, zinc metal displaces hydrogen to produce zinc chloride and hydrogen gas.Zn (s)+2HCl(aq) ZnCl2(aq)+H2 is an exothermic process that produces a lot of heat (g).

Reason: Zn+2HCl ZnCl2 + H2 is the result of the interaction involving zinc and hydrochloric acid.Single replacement reaction is the name given to this process in which zinc metal replaces hydrogen to produce salts of zinc chloride and hydrogen gas.

To know more about Hydrochloric visit:

https://brainly.com/question/14519330

#SPJ1

Answer:

y

Explanation:

godfydufufufjfhduddjgjxhdudhdufjfufigjfhfu

The term that refers to a variable that is dependent on another variable during an experiment is called a dependent variable.

A dependent variable is a variable that transitions as a consequence of the independent variable manipulation. It's the effect you're inquisitive in estimating, and it "depends" on your independent variable. The dependent variable is what you document after you've used the independent variable. The dependent variable depends on other importance. The dependent variable is calculated during the experiment.

The dependent variable has the capacity to operationalize; this can be accomplished by discerning the response of the dependent variable and measuring it.

To learn more about dependent variables visit here:

https://brainly.com/question/1670595

#SPJ4

E. coli has adapted to grow best at the optimum temperature range most conducive to its optimal enzymatic activity and metabolic processes, allowing for efficient and rapid growth in the human body.

37 degrees celsius is the most appropriate temperature for e. Coli boom due to the fact it's miles the temperature at which e. Coli can successfully carry out its metabolic tactics, which include protein synthesis, DNA replication, and mobile division.

E. Coli is a mesophilic bacterium, which means that it prospers at moderate temperatures commonly found inside the human frame (around 37°c). At decreased temperatures, inclusive of the ones located in refrigeration (4°c), e. Coli boom is slowed, and at better temperatures, such as those found in fever (above 40°c), e. Coli boom is inhibited or may even die.

The cause why e. Coli can develop and divide maximum efficiently at 37°c due to the specific enzymatic and metabolic pathways it possesses. Enzymes are organic catalysts that facilitate the chemical reactions important for existing processes. The enzymes in e. Coli functions optimally at this temperature variety, making an allowance for efficient nutrient uptake, electricity production, and cellular replication.

Learn more about optimum temperature:

brainly.com/question/13122916

#SPJ4

The amount of resistance that each resistor has, in this closed circuit, given the batteries is 3 ohms.

In a closed circuit, the total resistance (R_total) is equal to the sum of the individual resistances. We can use Ohm's law to solve for the resistance of each resistor:

Resistance (R) = Voltage (V) / Current (I)

Using Ohm's law, we can solve for the total resistance (R_total) of the circuit:

= V_total / I

= 18V / 2A

= 9 ohms

Since there are three identical resistors in the circuit, we can divide the total resistance by 3 to find the resistance of each resistor:

= 9 / 3

= 3 ohms

Find out more on resistors at https://brainly.com/question/15570745

#SPJ1

The moment about ab of the 180-lb force q is 13,860 lb-in.

To determine the moment about AB of the 180-lb force Q, we need to find the perpendicular distance between the line of action of the force and point A, and then multiply this distance by the magnitude of the force. This perpendicular distance is called the moment arm.

First, find the coordinates of point C. Since the vertical rod CD is welded to the midpoint C of the rod AB, use the midpoint formula:

x_C = (x_A + x_B)/2

y_C = (y_A + y_B)/2

where (x_A, y_A) and (x_B, y_B) are the coordinates of points A and B, respectively. Plugging in the values:

x_C = (0 + 50)/2 = 25 in.

y_C = (0 + 23)/2 = 11.5 in.

So point C has coordinates (25, 11.5).

Next, find the moment arm. To do this, draw a line through point C perpendicular to AB, and extend it until it intersects the line of action of the force Q. Call the point of intersection point D. Use similar triangles to find the distance from A to D.

The triangle ACD is similar to triangle ABC, since CD is perpendicular to AB and AC is the altitude to AB. Thus:

AC/AB = CD/BC

Solving for BC:

BC = (AB)(CD)/AC = (50 in.)(23 in.)/(11.5 in.) = 100 in.

Therefore, the distance from A to D is 100 - 23 = 77 in.

Finally, calculate the moment about AB by multiplying the magnitude of the force by the moment arm:

M_AB = Qd = (180 lb)(77 in.) = 13860 lb-in.

Therefore, the moment about AB of the 180-lb force Q is 13,860 lb-in.

Learn more on moment about force here: https://brainly.com/question/27282169

#SPJ1

Answer:  D. 37.6 m/s

Explanation: its D

The way that light refracts is the same as how a wave would refract. The way that light diffracts is the same as how a wave would. Similar to how interference occurs in waves, it also occurs in light.

Light will shift directions as it travels from one medium, like the air, to another, like the ocean. Light behaves in a similar manner to other waves, like sound waves.

The bending and spreading of waves around a barrier is known as diffraction. Because you can bend and block out specific light waves, it has to do with how light behaves as a wave.

To learn more about diffraction of light visit:

brainly.com/question/16096548

#SPJ1

The length of the third side of the triangular piece of land is approximately 125.7 m, and the angle between the first and third side is approximately 79.4° .

To find the length and orientation of the third side c, we can use the law of cosines, which states:

c² = a² + b² - 2ab cos(C)

where c is the length of the third side, a and b are the lengths of the first two sides, and C is the angle between sides a and b.

To find the angle C, we can use the law of sines, which states:

sin(C) / c = sin(A) / a = sin(B) / b

where A and B are the angles opposite sides a and b, respectively.

We can use the given measurements to calculate the values of a, b, and A:

a = 80.0 m

b = 105 m

To find angle A, we can use the law of cosines:

A = cos^-1[(b² + c² - a²) / (2bc)]

Since the angle between sides a and b is the same as the angle between sides b and c, we can use the same value for angle A and angle C. Therefore:

C = cos^-1[(a² + b² - c²) / (2ab)]

We can rearrange the law of sines to solve for c:

c = (a sin(C)) / sin(A)

Substituting the values we have calculated:

A = cos^-1[(105² + c² - 80²) / (2 x 105 x c)]

C = cos^-1[(80² + 105² - c²) / (2 x 80 x 105)]

c = (80 sin(C)) / sin(A)

Using a calculator, we get:

A ≈ 38.4°

C ≈ 79.4°

c ≈ 125.7 m

Therefore, the length of the third side and the angle between the first and third side is calulated to be 79.4° and  125.7 m (approx.)

Learn more about the law of cosines :

https://brainly.com/question/17289163

#SPJ4

Answer: The answer is 3.00 Ω

Explanation:you join R1 up with R2.

Camouflage is not a general adaptation.

Adaptation refers to the evolutionary process through which organisms develop certain traits or characteristics that allow them to survive and reproduce in their environment. These traits can be physical, behavioral, or physiological and are shaped by natural selection.

Adaptations can be both structural, such as the long neck of a giraffe, or functional, such as the ability of some plants to tolerate drought conditions. They can also be behavioral, such as the way in which some birds build their nests, or physiological, such as the ability of some animals to regulate their body temperature in extreme environments.

Camouflage is a specific adaptation. It refers to an animal's ability to change the color or pattern of its body to blend in with its environment. It does not have the same universal application as other general adaptations, such as streamlined shapes to reduce friction or legs for walking.

Learn about adaptation here https://brainly.com/question/29594

#SPJ1

1. The increase in kinetic energy results in the molecules of gas striking the walls of the container with more force, resulting in greater pressure.

2. The pressure of the propane inside the rigid tank will increase as the temperature of the tank increases on a hot summer day, and decrease as the temperature of the tank decreases on a cold day.

Kinetic energy is the energy an object possesses due to its motion. In physics, it is defined as the energy that an object possesses due to its motion, and it is dependent on the mass and velocity of the object. The formula for kinetic energy is KE = 1/2mv², where KE is the kinetic energy, m is the mass of the object, and v is the velocity of the object.

Kinetic energy is a scalar quantity, meaning that it has only magnitude and no direction. It is a fundamental concept in physics, and it is used to describe many phenomena, including the motion of particles, the motion of objects, and the conversion of energy between different forms. The kinetic energy of an object can be transformed into other forms of energy, such as potential energy or thermal energy, through various processes.

To learn more about Kinetic energy visit here:

brainly.com/question/26472013

#SPJ4

While building a house, it's crucial to take energy transmission into account because homes lose a lot of thermal energy. Radiation, conduction, and convection are three ways they can lose energy.

Buildings must consider heat transfer while designing the fabric of the structure as well as the passive and active systems required to provide the desired thermal conditions with the least amount of resource use.

The three most crucial variables are temperature, moisture content, and density. Thickness, air velocity, pressing, and ageing time are further considerations. The correlation between the key variables and thermal conductivity is shown.

To learn more about energy transfer visit:

brainly.com/question/18007832

#SPJ1

If natural gas were to be our primary way for generating electricity, it would have both positive and negative effects on individuals and the environment.

One of the positive effects is that natural gas is a cleaner-burning fossil fuel compared to coal and oil. It emits less greenhouse gases and pollutants, which can result in improved air quality and human health benefits. Additionally, natural gas is abundant and domestically produced, which can lead to greater energy independence and reduced reliance on foreign oil.

However, there are also negative effects of using natural gas as the primary source of electricity. One of the biggest concerns is the environmental impact of hydraulic fracturing or fracking, which is a common method of extracting natural gas from the ground. Fracking can lead to water contamination, air pollution, and other environmental risks. Additionally, natural gas is still a fossil fuel, which means that it is a non-renewable resource and will eventually run out.

Furthermore, relying on natural gas for electricity generation can also have negative impacts on individuals in terms of energy costs. While natural gas prices have been relatively low in recent years, they can still be subject to price fluctuations, which can result in higher energy bills for consumers. Additionally, natural gas pipelines and infrastructure can be prone to leaks and explosions, which can pose safety risks for nearby communities.

In conclusion, while natural gas can offer some benefits as a primary way for generating electricity, it is important to weigh the potential negative effects on individuals and the environment. Alternative sources of energy such as renewable resources should also be considered to promote a more sustainable and environmentally-friendly energy future.

Asphalt workers help to pour, smooth, and set asphalt on roads, paths, and parking lots.

An asphalt pavement is made up of several layers of asphalt. Asphalt layers are typically laid on either a bound or unbound road foundation layer. The first layer, beginning at the road surface, is known as the surface course. The second layer is commonly referred to as the binder course.

The base courses are the bottom tiers. A paver (also known as a road paver finisher, asphalt finisher, or road paving machine) is a type of construction equipment that is used to build asphalt concrete or Portland cement concrete on roads, bridges, parking lots, and other similar locations. It flattens the material and produces light compaction.

Learn more about Asphalt,

https://brainly.com/question/30588165

#SPJ1

Answer:

27J

Explanation:

Work done =force×distance

Therefore

Work done =18×1.5

Work done =27J

The mass of the planet is 3.40 x 10^24 kg. and the mass of the star is 6.50 x 10^30 kg.

A). g = GM/r^2

We can rearrange this equation to solve for the mass of the planet:

M = gr^2/G

Plugging in the given values, we get:

M = (12.5 m/s^2) x (1.70 x 10^7 m)^2 / 6.67 x 10^-11 Nm^2/kg^2

M = 3.40 x 10^24 kg

B). T^2 = (4π^2/G(M+m)) x a^3

M = (4π^2/G) x a^3 / T^2 - m

Plugging in the given values, we get:

M = (4π^2/6.67 x 10^-11 Nm^2/kg^2) x (2.70 x 10^11 m)^3 / (402 earth days)^2 - 3.40 x 10^24 kg

M = 6.50 x 10^30 kg

The solar system is a system consisting of the Sun, eight planets, dwarf planets, moons, asteroids, comets, and other celestial bodies that are bound together by gravity. The system is located in the Milky Way galaxy, about 25,000 light-years away from the galactic center. The Sun is at the center of the solar system, and the planets orbit around it in elliptical paths.

The eight planets are Mercury, Venus, Earth, Mars, Jupiter, Saturn, Uranus, and Neptune. The dwarf planets include Pluto, Ceres, Haumea, Makemake, and Eris. Moons orbit around the planets and asteroids and comets travel in their own paths throughout the solar system. The study of the solar system involves understanding the physical and chemical processes that occur on and within these celestial bodies, as well as their formation and evolution over time.

To learn more about Solar system visit here:

brainly.com/question/12075871

#SPJ4

Changing the force in the rubber band and the mass of the tub at the same time can make it difficult to determine the effect of each variable on the motion of the tub.

Changes in the mass of an object: If the mass of an object changes, the force required to move it will also change accordingly. This is due to the fact that force is directly proportional to mass.

Changes in the speed or velocity of an object: This is because the kinetic energy of the object increases with an increase in speed, which requires more force to be applied to maintain the same rate of acceleration.

This is because the change in one variable may mask the effect of the other variable. Therefore, it is best to change only one variable at a time and keep all other variables constant in order to accurately observe and measure the effect of each variable on the system.

Learn more on changing force here: https://brainly.com/question/29771105

#SPJ1

[tex]a \: pathogen \: is \: a \\ \: micro - organism \: that \: can \: cause \\ disease[/tex]

#a is the answer

hope it's helpful to you

Observing and controlling are on opposite ends of the secretary function.

The secretary function is a model used in organizational behavior to describe the process of selecting the best candidate from a pool of applicants. The model assumes that a decision-maker must choose from a fixed number of candidates in random order, without being able to go back and reconsider candidates that have been passed over. The decision-maker can either accept or reject each candidate, but once a candidate is rejected, they cannot be reconsidered.

In this context, "observing" refers to a decision-making style where the decision-maker takes a passive role and simply observes the candidates as they come, without intervening or taking any action. "Controlling," on the other hand, refers to a decision-making style where the decision-maker takes an active role and tries to control the outcome by setting a high threshold for acceptance and rejecting candidates who do not meet that threshold.

Therefore, observing and controlling are on opposite ends of the secretary function, representing two different decision-making styles that can be used when selecting the best candidate from a pool of applicants.

The frequency of the object, given that it produces 120 vibrations in 4 seconds is 30 Hertz

Frequency is defined as the number of complete oscillations made in 1 second. This is illustrated by the following formula:

Frequency (f) = Number of oscillation (n) / time (s)

From the question given above, the following data were obtained:

The frequency can be obtained as follow:

Frequency (f) = Number of oscillation (n) / time (s)

Frequency (f) = 120 / 4

Frequency = 30 Hertz

Thus, we can conclude, the frequency is 30 Hertz

Learn more about frequency:

https://brainly.com/question/15326129

#SPJ1

Here, the water in the wet cloth evaporates and make the heat also evaporated and keep the container of milk cool and devoid of microbes.

Refrigeration is the process of keeping materials in freezing point temperature and the ultimate cooling prevent the microbes attacking  the food materials.

If refrigeration is not possible in a place, we can keep a material cool by placing it in a bowl of water as seen in  the image and the container must be closed by a wet damp cloth.

Here, when the milk bottle is placed in the water bowl and closed by the cloth , water tends to evaporate through the cloth for which heat energy is needed. So it takes away the heat inside by evaporation and keeps the container and material inside cooler.

Find more on evaporation:

https://brainly.com/question/5019199

#SPJ9

Answer:

The electric field strength 62.5 N/C.

Explanation:

The electric force (F) on an object with charge q in an electric field with strength E can be calculated using the formula:

F = qE

Rearranging this formula, we can solve for the electric field strength:

E = F / q

In this case, the object has a charge of q = 0.08 C and experiences an electric force of F = 5.0 N. Substituting these values into the formula, we get:

E = 5.0 N / 0.08 C

E = 62.5 N/C

So, the electric field strength is 62.5 N/C.

The force between the charged spheres is -5.4 x 10¹⁰ N.

option D.

The force between two charged spheres can be calculated using Coulomb's law, which states that the force between two point charges is proportional to the product of their charges and inversely proportional to the square of the distance between them.

The formula for Coulomb's law is:

F = kq1q2/d^2

where;

The value of the Coulomb constant is 8.98755 × 10^9 N·m^2/C^2.

Plugging in the values given in the problem, we get:

F = (8.98755 × 10^9) * (2 C) * (-3 C) / (1 m)^2

Simplifying this expression gives:

F ≈ -5.4 x 10¹⁰

Therefore, the force between the spheres is -5.4 x 10¹⁰ N, which means that the spheres are being pulled towards each other. The negative sign indicates that the force is attractive due to the opposite charges on the spheres.

Learn more about electric force here: https://brainly.com/question/17692887

#SPJ1

The spaceship appears to be 38.97 meters long as measured by the mission control in Texas.

This is a problem involving length contraction, which is a consequence of Einstein's theory of special relativity. According to special relativity, an object in motion appears to be shorter in the direction of motion as measured by an observer at rest relative to the object.

The formula for length contraction is:

L' = L / γ

γ is the Lorentz factor, given by:

γ = 1 / sqrt(1 - v^2/c^2)

In this problem, the spaceship is traveling at a velocity of 0.5c relative to Earth. Therefore, the Lorentz factor is:

γ = 1 / sqrt(1 - (0.5c)^2/c^2) = 1 / sqrt(1 - 0.25) = 1.1547

The proper length of the spaceship is 45 m, as measured by the crew on the spaceship. Therefore, the observed length of the spaceship, as measured by mission control in Texas, is:

L' = L / γ = 45 m / 1.1547 = 38.97 m (rounded to two decimal places)

Read more about Special Relativity:

https://brainly.com/question/29806801

#SPJ4

The parallel circuit containing three resistors' equivalent resistance is thus found to be 1.64 ohms.

The electrical resistance measured in Ohms is a measure of a conductor's ability to create a current of one amp when a voltage of one volt is applied across its terminals.

Ohm defines the "1 Ohm" measure of resistance as the distance between two places in a wire where 1 volt would push 1 amp, or 6.241 1018 electrons, when applied. Greek letter "," sometimes known as omega and pronounced "ohm," is typically used to denote this value in schematics.

To know more about ohms visit:

https://brainly.com/question/1462314

#SPJ1

Answer:

B or 1.6

Explanation:

Answer:

Explanation:

The power on the primary side of a transformer is equal to the power on the secondary side, neglecting losses. This is because power is conserved in a transformer.

Therefore, if the power on the primary side is 2 MW, then the power on the secondary side will also be 2 MW.

So, the correct answer is: 2 MW.

The speed of the wave is 4 m/s.

option A.

The speed of a wave depends on the type of wave and the medium through which it is traveling. In general, the speed of a wave can be calculated by multiplying the wavelength of the wave by its frequency.

In a vacuum, electromagnetic waves (such as light) travel at a constant speed of approximately 299,792,458 meters per second, which is commonly referred to as the speed of light.

For this given question, if the wave oscillates 4 times per second, then the speed is 4 m/s.

Learn more about speed of wave here: https://brainly.com/question/2142871

#SPJ1

The fastest velocity that the roller coaster can travel without exceeding a centripetal acceleration of 16 m/s^2 is 20 m/s.

Velocity can be defined as the displacement of the object in unit time.

The centripetal acceleration (ac) of an object moving in a circular path with radius (r) and velocity (v) is given by the formula:

ac = v^2 / r

We want to find the maximum velocity (v) that the roller coaster can travel without exceeding a centripetal acceleration of 16 m/s^2, given that the radius of the circular path is 25 meters. We can rearrange the formula to solve for v:

v^2 = ac * r

v = sqrt(ac * r)

Substituting the given values, we get:

v = sqrt(16 m/s^2 * 25 m) = sqrt(400 m^2/s^2) = 20 m/s

Therefore, the fastest velocity that the roller coaster can travel without exceeding a centripetal acceleration of 16 m/s^2 is 20 m/s.

Learn more about velocity here :brainly.com/question/80295

#SPJ1

We can determine whether a change is physical or chemical by analyzing the what type of change is occurred. The change in color or formation of new product is a chemical change.

A chemical change is a type of change which include the breaking or making of chemical bonds and the formation of new products which has properties different from the initial substances.

Phase changes, change in size, shape, dissolving, conductivity etc. are  physical changes. They do not involve any change in chemical bonds or the formation of new product.

The change in color indicates the formation of a new product. All the chemical reactions like the corrosion of metals reaction of metals with acids or water etc . are all chemical changes.

Find more on physical changes:

https://brainly.com/question/21509240

#SPJ1