MgCl2 is electrolyzed to produce Mg and Cl2. 1311 g of MgCl2 decomposed, what is the percent yield for this reaction if 246.43 g of magnesium are recovered ?
PLEASE HELP
***write a balanced equation

At the equivalence point, 0.505 g of phenol reacted with 0.123 M NaOH to form 0.0318 M phenolate ion and 0.0319 M sodium ion, with 0 M hydroxide ion and 0.0318 M H3O+.

The balanced equation for the titration reaction is:

C6H5OH(aq) + OH-(aq) → C6H5O-(aq) + H2O(ℓ)

From the equation, we can see that 1 mole of phenol reacts with 1 mole of hydroxide ion (OH-). To determine the moles of hydroxide ion required to reach the equivalence point, we can use the following equation:

moles of OH- = M × V

where M is the concentration of NaOH, and V is the volume of NaOH required to reach the equivalence point.

To find the volume of NaOH required to reach the equivalence point, we need to calculate the moles of phenol present in the solution. We can use the following equation to do this:

moles of C6H5OH = mass ÷ molar mass

where the molar mass of phenol is 94.11 g/mol.

moles of C6H5OH = 0.505 g ÷ 94.11 g/mol = 0.005368 mol

Since 1 mole of phenol reacts with 1 mole of hydroxide ion, the moles of hydroxide ion required to reach the equivalence point is also 0.005368 mol. Using the equation above, we can calculate the volume of NaOH required:

moles of OH- = M × V

0.005368 mol = 0.123 M × V

V = 0.0437 L = 43.7 mL

Therefore, the volume of NaOH required to reach the equivalence point is 43.7 mL.

At the equivalence point, all of the phenol has reacted with the hydroxide ion, and we have a solution containing only the phenolate ion (C6H5O-) and water. The moles of C6H5O- formed at the equivalence point is equal to the moles of hydroxide ion added:

moles of C6H5O- = moles of OH- added = 0.005368 mol

The volume of the solution at the equivalence point is 125 mL + 43.7 mL = 168.7 mL.

Now, we can use the initial volume and concentration of the phenol solution to calculate the concentration of the phenolate ion and other ions at the equivalence point. The initial concentration of the phenol solution is:

C6H5OH = 0.505 g ÷ (94.11 g/mol × 0.125 L) = 0.424 M

Since the moles of phenol and phenolate ion are equal at the equivalence point, the concentration of the phenolate ion is also 0.005368 mol ÷ 0.1687 L = 0.0318 M.

At the equivalence point, all of the hydroxide ions have reacted with the phenol to form the phenolate ion and water. Therefore, the concentration of hydroxide ion at the equivalence point is 0 M.

The balanced equation also tells us that for every phenolate ion formed, a hydronium ion (H3O+) is also formed. Therefore, the concentration of H3O+ at the equivalence point is equal to the concentration of the phenolate ion:

[H3O+] = 0.0318 M

Finally, to calculate the concentration of sodium ion (Na+) at the equivalence point, we need to consider the balanced equation. For every mole of phenol that reacts, a mole of sodium hydroxide is consumed, forming a mole of sodium phenolate. Therefore, the moles of sodium ion in the solution at the equivalence point is equal to the moles of sodium hydroxide added to reach the equivalence point:

moles of Na+ = moles of NaOH added = 0.123 M × 0.0437 L = 0.00537 mol

The volume of the solution at the equivalence point is 0.1687 L. Therefore, the concentration of sodium ion at the equivalence point is:

[Na+] = 0.00537 mol ÷ 0.1687 L = 0.0319 M

In summary, at the equivalence point of the titration of 0.505 g of phenol with 0.123 M sodium hydroxide solution, the volume of NaOH required is 43.7 mL, and the concentration of the phenolate ion is 0.0318 M, the concentration of hydroxide ion is 0 M, the concentration of H3O+ is 0.0318 M, and the concentration of sodium ion is 0.0319 M.

For such more questions on Equivalence point

https://brainly.com/question/2496608

#SPJ4

The adding of additional H2O will result in moving of the equilibrium dynamics to the left, the amounts of CO2 and H2O would increase.

We have equation,

CO₂ + H₂O → H₂CO₃

After adding additional we get,

4CO₂ + 4H₂O → 4H₂CO₃

As equilibrium moves to the left, new reactants are formed by adding extra products to the chemical process. And the equilibrium can be changed by removing a reactant from the system. The chemical equilibrium of the processes is explained by the Le Chatelier's principle. This concept describes how changes in a system's volume, pressure, concentration, and temperature may lead to a new equilibrium state of a process.

The system's equilibrium position lowers the influence of any forced changes in the response state. That example, increasing the temperature will aid in the case of an endothermic process. The presence of a catalyst has no effect on the equilibrium reaction position.

Learn more about Equilibrium:

https://brainly.com/question/30929519

#SPJ4

The radius of a tantalum atom if its crystal structure is a BCC with a density of 16. 6 g/cm3 and its atomic mass is 180. 9 amu is 1.456 Å.

The radius of a tantalum atom can be calculated using the formula:

r = (3Vc/4πn)[tex]^\frac{1}{3}[/tex]

where Vc is the unit cell volume, n is the number of atoms in the unit cell, and r is the radius of the atom.

For a BCC structure, there are 2 atoms per unit cell, so n = 2. The unit cell volume for a BCC crystal structure is given as:

Vc = (64/3√3)a³

where a is the length of the edge of the cube.

To solve for the radius of the tantalum atom, we need to first calculate the length of the edge of the cube. We can use the density of tantalum to calculate its atomic mass density:

ρ = m/V

where ρ is the density, m is the mass of the unit cell, and V is the volume of the unit cell. For a BCC unit cell, the mass of the unit cell can be calculated as:

m = n × atomic mass

where n is the number of atoms per unit cell and atomic mass is the atomic mass of the element. Substituting the values given, we get:

ρ = m/V = n × atomic mass / Vc

Rearranging the equation and solving for a, we get:

a = (4ρVc/2n×atomic mass)^⁰⁵

Substituting the given values and solving for a, we get:

a = [(4 × 16.6 g/cm³ × (64/3√3)a³) / (2 × 2 × 180.9 g/mol)][tex]^\frac{1}{2}[/tex]

Simplifying the expression, we get:

a = 3.307 Å

Now, we can calculate the radius of the tantalum atom using the formula:

r = (3Vc/4πn)[tex]^\frac{1}{3}[/tex]

Substituting the values we have calculated, we get:

r = [(3 × (64/3√3)a³) / (4π × 2)][tex]^\frac{1}{3}[/tex] = 1.456 Å

Therefore, the radius of a tantalum atom in a BCC crystal structure with a density of 16.6 g/cm3 and an atomic mass of 180.9 amu is approximately 1.456 Å.

Learn more about Tantalum atom:

https://brainly.com/question/11047097

#SPJ4

Answer:

The percentage of zinc in the compound; Zn3(PO4)2 is 50.65%.

Approximately 225 sec, it will take for 75 percent of the initial amount of C[tex]_{25}[/tex]H[tex]_3[/tex]ON[tex]_3[/tex]⁺(aq) to react. Therefore, the correct option is option B.

The logarithm of a ratio of incident over transmitted radiant power throughout a sample is known as absorbance. As an alternative, absorbance can be characterized simply "the negative logarithm with one less absorptance, as determined on a homogeneous sample," for samples that scatter light.

In several technical fields, the phrase is used to describe how experimental measurement data are quantified. Although the phrase refers to measuring how much light is absorbed, it is frequently confused with measuring how much light is "lost" to either a detector system by other methods. Approximately 225 sec, it will take for 75 percent of the initial amount of C[tex]_{25}[/tex]H[tex]_3[/tex]ON[tex]_3[/tex]⁺(aq) to react.

Therefore, the correct option is option B.

To know more about absorbance, here:

https://brainly.com/question/23938376

#SPJ2

Your question is incomplete but most probably your full question was,

Approximately how long will it take for 75 percent of the initial amount of C25H30N3. +(aq) to react?

A. 75 sec.

B. 225 sec.

C. 300 sec.

D. 600 sec

Answer:

This is confused because they don't have choices

Answer:

219600 Pa (or 2.196 bar, or 31.9 psi).

Explanation:

weight of water:

volume of water = 2m x 5m x 8m = 80 cubic meters

weight of water = volume of water x density of water x gravitational acceleration

density of water is 1000 kg/m^3 and the gravitational acceleration is 9.81 m/s^2.

weight of water = 80 x 1000 x 9.81 = 784800 N

weight of the tank

volume of tank = 2m x 5m x 8m = 80 cubic meters

weight of tank = volume of tank x density of tank x gravitational acceleration

relative density of the tank material is 1.8, which means its density is 1.8 times that of water, or 1800 kg/m^3.

weight of tank = 80 x 1800 x 9.81 = 1411200 N

The total weight acting on the bottom of the tank is the sum of the weight of the water and the weight of the tank:

Total weight = weight of water + weight of tank = 2196000 N

The max pressure at the bottom of the tank is the total weight divided by the area of the bottom of the tank:

max pressure = total weight / area of bottom of tank

the area of the bottom of the tank is 2m x 5m = 10 square meters.

Max pressure = 2196000 N / 10 m^2 = 219600 Pa

Therefore, your answer is 219600 Pa (or 2.196 bar, or 31.9 psi)

Hope this helped. Let me know if you need any further explanation.

Answer:

The rate of effusion for a gas is inversely proportional to the square-root of its molecular mass (Graham's Law). The gas with the lowest molecular weight will effuse the fastest. The lightest, and therefore fastest, gas is helium.

Explanation:

Answer: Ionic bonding

Explanation:

metal + non metal = ionic bond

Sodium = metal

Bromine = nonmetal

Answer: Who conducted the study?

The study was conducted by the American Heart Association.

What was the topic of the study?

The topic of the study was kids' "screen-time" and its impact on their health.

Where was the study conducted?

The study was conducted in Montreal, Canada.

When was the study conducted?

The specific timeframe of the study is not provided in the question, so it is unclear when the study was conducted.

Why was the study conducted?

The study was conducted to examine the relationship between kids' "screen-time" and their health, specifically looking at the effects on blood vessel health and arterial stiffness. The study aimed to provide more information about the potential negative impacts of excessive screen time on children's health, and to raise awareness about the importance of limiting screen time in order to promote healthier lifestyles for children.

Explanation:

The order of a reaction is the sum of the powers of the concentration terms of the reactants in the experimentally determined rate equation for the reaction.

The rate law expresses the experimentally observed rate of a reaction in terms of the molar concentrations of the reactants which determine the rate of a reaction.

The rate law of the given reaction is:

rate = k [A₂]²[B₀]²

If [B₀] = 2B₀

Then the rate law is:

rate = k [A₂]²[2B₀]²

= k [A₂]²4[B₀]²

= 4k

The order of the reaction is 4.

Thus the rate law and order of the reaction is determined.

To know more about rate law, visit;

https://brainly.com/question/14779101

#SPJ1

According to the ideal gas equation, the  pressure of 8.88 mole of helium gas at 20.0° C and 180 L volume is 111.97 atmospheres.

Pressure is defined as the force applied on an object perpendicular to it's surface per unit area over which it is distributed.Gauge pressure is a pressure which is related with the ambient pressure.

There are various units by which pressure is expressed most of which are derived units which are obtained from unit of force divided by unit of area . The SI unit of pressure is pascal .

It is a scalar quantity which is related to the vector area element with a normal force acting on it.It is distributed over solid boundaries and across arbitary sections of fluid normal to the boundaries at every point.

According to the ideal gas equation , PV=nRT substitution gives P= 8.88×8.314×273/180=111.97 atmospheres.

Learn more about pressure,here:

https://brainly.com/question/18431008

#SPJ2

Answer:

1.99875 or 2mols

Explanation:

use the formula moles = mass/molar mass where; the molar mass = mass number of an element

The mass of aluminum that reacted to produce this quantity of hydrogen gas is 0.181 g.

Partial pressure is a term used in chemistry and physics to describe the pressure that a single gas component would exert if it occupied the same volume as a mixture of gases. In a mixture of gases, each gas exerts a pressure known as its partial pressure, which is proportional to the number of molecules of that gas in the mixture.

To calculate the partial pressure of hydrogen gas in the sample, we can use the following equation:

Partial pressure of hydrogen gas = Total pressure - Vapor pressure of water

Partial pressure of hydrogen gas = 129 kPa - 4.10 kPa = 124.90 kPa

Therefore, the partial pressure of hydrogen gas in the sample is 124.90 kPa.

To calculate the mass of aluminum that reacted to produce this quantity of hydrogen gas, we need to use the balanced chemical equation for the reaction and the ideal gas law. The balanced chemical equation for the reaction of aluminium with hydrochloric acid is as follows:

2Al + 6HCl = 2AlCl3 + 3H2

From the equation, we see that two moles of aluminum react to produce three moles of hydrogen gas. We can use the ideal gas law to calculate the number of moles of hydrogen gas in the sample:

PV = nRT

n = PV/RT

where P is the partial pressure of hydrogen gas, V is the volume of gas collected, R is the gas constant, and T is the temperature in kelvin.

First, we need to convert the temperature from Celsius to kelvin:

T = 29.4 + 273.15 = 302.55 K

Next, we can calculate the number of moles of hydrogen gas:

n = (124.90 kPa)(206.1 mL)/(8.31 L·kPa/mol·K)(302.55 K)

n = 0.0101 moles

Since two moles of aluminum react to produce three moles of hydrogen gas, the number of moles of aluminum that reacted is:

n(Al) = (2/3)n(H2) = (2/3)(0.0101 moles) = 0.00673 moles

Finally, we can use the molar mass of aluminum to calculate the mass of aluminum that reacted:

mass(Al) = n(Al) × molar mass(Al)

mass(Al) = 0.00673 moles × 26.98 g/mol = 0.181 g

To know more about Vapor pressure, visit:

https://brainly.com/question/26127294

#SPJ1

The correct graph to show her results would have the horizontal axis labeled as "Distance from Hog Farm" and the vertical axis labeled as "Amount of Nitrates."

Distance is the measure of how far apart two objects or points are. It is usually measured in units such as miles, kilometers, or meters. Distance is an important concept in mathematics, physics, and other sciences, as it can be used to calculate the time it takes for an object to travel from one point to another. Distance can also be used to measure the size of an object, or the length of a line. Distance can also be used to measure the amount of energy it takes to move an object from one point to another. In short, distance is a measure of the space between two objects or points.

This graph would show how the amount of nitrates increases with increasing distance from the hog farm.

To learn more about Distance

https://brainly.com/question/30195443

#SPJ1

From the balanced chemical equation, we can see that 1 mole of P4O10 reacts to form 4 moles of H3PO4. Therefore, we need to find the number of moles of P4O10 to calculate the number of moles of H3PO4.

9 moles of P4O10 reacts with 51 moles of H2O, which means that 9 moles of P4O10 reacts to form 9 moles of H3PO4.

So, the number of moles of H3PO4 formed from 9 moles of P4O10 is 9 mol.

Therefore, the answer is 9 mol.

Answer:

Explanation:

it's 36 my lil sis had the question not long ago so it's 36!! :)

Wetting agents are added to water to lower its surface tension and increase its ability to penetrate porous materials like fabric, wood, and paper, which are difficult to wet with plain water.

Viscosity is a measure of a fluid's resistance to flow. Wetting agents are added to water to lower its surface tension and increase its ability to penetrate porous materials like fabric, wood, and paper, which are difficult to wet with plain water.

The lower surface tension caused by the wetting agent allows water to spread out more easily, creating a larger surface area to cool and extinguish flames.

The reduction in viscosity also helps the water to penetrate more deeply into the fuel, making it more effective in firefighting.

More on viscosity can be found here: https://brainly.com/question/30577668

#SPJ1

Answer:

Therefore, 12 moles of hydrogen makes 8 moles of ammonia

Ethanol (also known as ethanol) has the chemical formula [tex]C_{2} H_{5} OH[/tex] and the chemical formula[tex]CH_{3} CH_{2} OH[/tex].

In a chemical formula, each item's smallest quantity, such as a monomer or formula unit, is listed together with the total atoms in that unit. By referring to the names of the constituent parts and a few straightforward rules, we may name simple mixtures given a chemical formula.

The chemical nomenclature of a compound is represented by its chemical formula. It displays the component elements and how many atoms from each element are found in a single complex molecule.

To know more about Chemical Formula visit:

https://brainly.com/question/29031056

#SPJ1

Answer:

I'd be happy to help with a worksheet on subatomic particles! Here are some potential questions:

1. What are the three subatomic particles found in an atom, and what are their respective charges and locations within the atom?

2. Which subatomic particle determines the identity of an atom?

3. What is the relationship between an element's atomic number and the number of protons in its nucleus?

4. What is an isotope, and how do isotopes of an element differ from each other?

5. What is the difference between an ion and an atom?

6. Describe the process of beta decay and the subatomic particles involved.

7. What is the difference between a molecule and an atom, and how are they related?

8. What is a quark, and what role do they play in subatomic particles?

9. Explain the concept of wave-particle duality and its relevance to subatomic particles.

10. What are the four fundamental forces in the universe, and which subatomic particles are involved in each force?

Explanation:

As per the pictorial representation,the first image is of an element while the second one is that of a mixture of an element and a compound.

It is defined as a substance which cannot be broken down further into any other substance. Each element is made up of its own type of atom. Due to this reason all elements are different from one another.

Elements can be classified as metals and non-metals. Metals are shiny and conduct electricity and are all solids at room temperature except mercury. Non-metals do not conduct electricity and are mostly gases at room temperature except carbon and sulfur.

The number of protons in the nucleus is the defining property of an element and is related to the atomic number.All atoms with same atomic number are atoms of same element.

Learn more about element,here:

https://brainly.com/question/13025901

#SPJ1

Part 1: C represents the compound carbon dioxide (CO2),  in the given diagram of the question .

Part 2: One process that could release carbon dioxide into the air is combustion, which occurs when organic compounds (such as fossil fuels) react with oxygen in the air to produce carbon dioxide and water. Other processes that can release carbon dioxide include volcanic eruptions, natural decay of organic matter, and respiration by living organisms.

Part 3: The elements that form carbon dioxide, namely carbon and oxygen, are conserved during the carbon cycle. This is because carbon is constantly being exchanged between the atmosphere, oceans, and land through processes such as photosynthesis, respiration, and decomposition. When plants undergo photosynthesis, they take in carbon dioxide from the atmosphere and use it to build their biomass, incorporating carbon into their structures. When animals eat plants or other animals, they consume this carbon and release carbon dioxide back into the atmosphere through respiration. When organisms die, their bodies decompose and release carbon back into the environment. In this way, carbon is constantly being recycled through the carbon cycle.

The formation of carbon dioxide from the recycling of carbon occurs during cellular respiration, which is the process by which living organisms break down organic compounds (such as glucose) to release energy. During cellular respiration, carbon-based molecules are oxidized, or combined with oxygen, to produce carbon dioxide as a waste product. This carbon dioxide can then be released back into the atmosphere or taken up by plants through photosynthesis.

To know more about CARBON DIOXIDE (CO2) , visit :

https://brainly.com/question/28151123

#SPJ1

The properties analyzed in this activity, such as ionic radius, atomic radius, and electronegativity, show periodicity of the chemical elements

It is because they are repeated in a systematic and predictable fashion as you move across a period in the periodic table. Specifically, as you move across a period, the ionic radius increases from left to right. This occurs because the nucleus of elements to the left of the period is larger and has more protons, while the valence electrons increase from left to right, meaning the elements to the right of the period have more electrons that are farther away from the nucleus.

For more question on electrons click on

https://brainly.com/question/371590

#SPJ11

48.92 g of CaCO3 decomposes to produce 10.94 L of CO2 at STP.

Carbonic salt of calcium is called Calcium Carbonate.

CaCO3(s) → CaO(s) + CO2(g)

Molar mass of CaCO3 is 100.09 g/mol, so we calculate the number of moles of CaCO3 present as:

48.92 g CaCO3 ÷ 100.09 g/mol = 0.488 mol CaCO3

0.488 mol CO2 are produced

As volume of 1 mole of ideal gas at standard temperature and pressure (STP) is 22.4 L, hence we calculate volume of CO2 produced at STP as:

0.488 mol × 22.4 L/mol = 10.94 L

Therefore, 48.92 g of CaCO3 decomposes to produce 10.94 L of CO2 at STP.

To know more about calcium carbonate, refer

https://brainly.com/question/29671908

#SPJ1

According to the Octet Rule, for a molecule to be stable, all of the atoms must have 8 valence electrons, either by sharing, losing, or acquiring electrons. Atoms typically exchange electrons within covalent bonds in order to adhere to the Octet Rule.

Define covalent bond

The exchange of one or more pairs of electrons between two atoms forms a covalent bond. The two atomic centers are drawing these electrons in unison. When there is insufficient space between two atoms' electronegativities for an electron transfer to take place and create ions, a covalent bond is formed.

To learn more about covalent bonds use:

https://brainly.com/question/3447218

#SPJ1

Wool and polystyrene, which trap air, are effective insulators. Aluminum and other metals are excellent heat conductors. A thermos keeps things cold for longer by limiting the flow of heat.

It is common to employ insulators like glass, plastic, rubber, air, and wood. Insulators protect us from the potentially dangerous consequences of electricity flowing via conductors. Voltage levels in electrical circuits can occasionally be extremely high.

Ceramics, wood, rubber, plastic, and rubber are effective insulators. They are frequently employed in the construction of cooking tools, like as saucepan handles, to prevent heat from rising and burning the cook's hand.

To know more about insulators visit:

https://brainly.com/question/24909989

#SPJ1

Explanation:

Refer to pic............

Sand and other particles are buried, compacted, and cemented together.

Sedimentary rock is formed from the accumulation and cementation of sediment. The process of sedimentation begins when weathering and erosion break down pre-existing rocks, soils, or organic materials into small pieces, such as sand, silt, or clay. These pieces are then transported by water, wind, or ice and deposited in a new location, such as a river bed, a lake, a delta, or an ocean floor.

Over time, the layers of sediment build up and become buried under more sediment. As the weight of the overlying sediment increases, the pressure on the lower layers also increases. This pressure, combined with the presence of groundwater, causes the minerals in the sediment to dissolve and re-crystallize, forming a cementing agent that binds the sediment particles together. This process is called cementation.

Learn more about sedimentary rock:https://brainly.com/question/10709497

#SPJ1

Answer: 91

Explanation:

Actual/theoretical X 100  = 42.9/47.2 X 100 = 91

Explanation:

Refer to pic..........