Match the type of glacier with its description.
Ice sheets: Large, regionally continuous masses of ice more than 50,000 km^2 in area
Alpine Glaciers: Glaciers that begin in mountainous terrain and flow down valleys
Piedmont glaciers: Broad glaciers that form when a more restricted glacier spreads out as it moves into less confined topography

Answers

Answer 1

Ice Sheets are large, regionally continuous masses of ice more than 50,000 km^2 in area. Therefore, statement A is a match.

Alpine Glaciers are glaciers that begin in mountainous terrain and flow down valleys. Therefore, statement C is a match.

Piedmont Glaciers are broad glaciers that form when a more restricted glacier spreads out as it moves into less confined topography. Therefore, statement B is a match.

Matching the types of glaciers with their descriptions are as follows.

A) Ice Sheets - Large, regionally continuous masses of ice more than 50,000 km^2 in area

Ice sheets are the largest type of glacier and can cover entire continents. Their massive size fits the description provided. They are typically found in polar regions such as Antarctica and Greenland.

B) Piedmont Glaciers - Broad glaciers that form when a more restricted glacier spreads out as it moves into less confined topography

Piedmont glaciers form when an alpine glacier reaches a less confined area and spreads out, creating a wider and less steep glacier. They typically form at the base of mountains or steep valleys and spread out onto flat plains.

C) Alpine Glaciers - Glaciers that begin in mountainous terrain and flow down valleys

Alpine glaciers are glaciers that begin in mountainous terrain and flow down valleys. They are typically found in high-altitude areas and are formed by the accumulation and compaction of snow and ice over many years.

The reasoning behind these descriptions is based on the location and formation of each type of glacier. Ice sheets are the largest type of glacier and are found in polar regions, while piedmont glaciers form at the base of mountains and spread out onto flat plains. Alpine glaciers are formed in high-altitude mountainous terrain and flow down valleys.

Note: The question is incomplete. The complete question probably is: Match the type of glacier - Ice sheets, Alpine Glaciers, and Piedmont glaciers with its description. A) Large, regionally continuous masses of ice more than 50,000 km^2 in area. B) Broad glaciers that form when a more restricted glacier spreads out as it moves into less confined topography. C) Glaciers that begin in mountainous terrain and flow down valleys.

Learn more about Glacier:

https://brainly.com/question/2142179

#SPJ11


Related Questions

Which class of Mesopotamian society developed art and learning?

lower class

middle class

upper class

Answers

Because they traded, sold, and purchased things for their civilization, merchants ranked third. Because they produced arts and crafts, the craftsmen followed the merchants. Many of the artefacts on display in museums today were created by craftspeople in Mesopotamia. Correct option is A.

The social structure of Mesopotamia was similar to that of many later civilizations. The lowest class—those who were enslaved—was followed by the middle class and ultimately the upper class. The highest socioeconomic class represented by the monarch and royals was at the apex of the pyramid.

Kings and their families, priests and priestesses, senior military officials, scribes, and more affluent merchants and traders made up the upper classes in ancient Mesopotamia. The royal family, land-owning families, and priests made up the hereditary nobility.

To know more about Mesopotamia, click:

https://brainly.com/question/31117536

#SPJ4

If it takes a river's 100-year flood to wash out a riverside community, а and that community was just washed out by a 100-year flood, when can they expect to be washed out the next time? During the next spring time, when rain and snow will melt to make the river stage rise again. In 100 years because the studies of flooding indicated that 100- year floods occur every 100 years, Any time, maybe even tomorrow. Sometime into the next century beyond 100 years from now because 100-years is the minimum time between major flooding events on rivers.

Answers

If a riverside community was just washed out by a 100-year flood, they could potentially be washed out again at any time, including tomorrow.

The term "100-year flood" does not mean that it occurs once every 100 years, but rather it is a statistical probability of a flood of that magnitude occurring in any given year.

Therefore, there is always a chance of another 100-year flood occurring in the next year, or even in the same year. The likelihood of another 100-year flood occurring within a short time frame may depend on local conditions, such as changes in land use, weather patterns, and other factors that can affect the flow of water in the river.

Learn more about flood occurring

https://brainly.com/question/30467611

#SPJ4

One of Earth's most rigorous habitats is a:
a. sand beach.
b. coral reef.
c. kelp forest.
d. rocky intertidal.

Answers

The rocky intertidal zone is one of the most extreme habitats on Earth, where the ocean meets the rocky shoreline. This zone is constantly exposed to the elements of both air and water, as the tides ebb and flow every day. The organisms that inhabit this habitat must be able to withstand these harsh conditions, which include strong waves, pounding surf, and extreme temperatures.

One of the biggest challenges for organisms in the rocky intertidal zone is dealing with the extreme changes in salinity and temperature that occur as the tides come in and out. Many of the organisms that live in this habitat have developed special adaptations to help them survive, such as the ability to clamp down tightly to the rocks to avoid being washed away by waves.

Other adaptations include the ability to go without water for long periods of time, and the ability to tolerate high levels of salt. Some organisms have even developed specialized body shapes and structures to help them deal with the constant pounding of the waves, such as barnacles and mussels, which have hard shells to protect them from damage.

Despite these challenges, the rocky intertidal zone is home to a wide variety of organisms, including crabs, sea stars, anemones, and many others. These organisms have developed unique adaptations that allow them to thrive in this challenging environment, and they play an important role in the overall ecosystem of the ocean.

To know more about rocky intertidal zone click this link-

brainly.com/question/15041368

#SPJ11

True/False.the kalahari desert of southern africa is home to the foraging group known as the ju/'hoansi san.

Answers

The statement "the Kalahari Desert of Southern Africa is home to the foraging group known as the ju/'hoansi san" is true because the Ju/'hoansi San are a group of indigenous people who traditionally live as hunter-gatherers in the Kalahari Desert.

The Kalahari Desert spans across parts of Botswana, Namibia, and South Africa.

The Ju/'hoansi San are known for their deep knowledge of the desert environment, their hunting and foraging skills, and their unique language that features click consonants. Their way of life has been shaped by the arid conditions of the Kalahari Desert, and their culture and social organization have evolved to adapt to the challenges posed by their environment.

Learn more about Kalahari Desert https://brainly.com/question/30311771

#SPJ11

EXERCISE 9.2 Determining Elevations from Topographic Maps Date: Name: Section: Course: To determine the elevation of a point on a topographic map: 1. Determine the contour interval for the map 2. Find the known elevation closest to the point. This may be a benchmark or a contour line Remember that every fifth contour line is a heavier index contour, but you may have to follow contour Ines some distance before finding an elevation label 3. Determine whether the point is higher or lower than the known elevation by examining the sequence of adjacent contour line elevations and by taking note of nearby festure names, such as fire tower, Valley and so forth,4. Interpolate between the contour lines that bracket the point to get the elevation Using this procedure and what you have learned in the text, answer the following questions: (a) in Figure 9.7, how high is the highest point on the rim of the crater? Explain how you made this estimation 1 (b) in Figure 9.7. what is the elevation of the lowest point in the crater? Explain how you made me estimation (c) A red "x" in Figure 9.5 marks a spot on the shore of Baskahegan Lake, but the printed DEM doesn't say anything about its elevation. Use the topographic map (Fig. 9.4) to estimate the elevation of this point as accurately as possible feet (d) in Figure 9.4. what are the elevations of the highest point on Hunt Ridge? feet the highest point on Farrow Mountain feet the intersection of U.S. Route 1 and Maine Route 6 in Topsfield? feet • Malcome Bog? feet (e) What is the relief between Little Tomah Lake and the top of Tomah Mountain? feet (1) What is the relief between the surface of East Musquash Lake and the intersection between U.S. Route 1 and Maine Route 6 in Topsfield? feet Repeat 250 300 300 -250 -200 -150 -100 300 250 200 150 F100 50 EXERCISE 9.2 Determining Elevations from Topographic Maps Name: Course: Section: Date: To determine the elevation of a point on a topographic map 1. Determine the contour interval for the map 2. Find the known elevation closest to the point. This may be a benchmark or a contour line. Remember that every fifth contour line is a heavier index contour, but you may have to follow contour lines some distance before finding an elevation label 3. Determine whether the point is higher or lower than the known elevation by examining the sequence of adjacent contour line elevations and by taking note of nearty feature names, such as "fire tower," valley" and so forth. 4. Interpolate between the contour lines that bracket the point to get the elevation Using this procedure and what you have learned in the text, answer the following questions (a) in Figure 9.7. how high is the highest point on the rim of the crater? Explain how you made this estimation (b) in Figure 9.7, what is the elevation of the lowest point in the crater? Explain how you made this estimation (c) Ared in Figure 9.5 marks a spot on the shore of Baskahegan Lake, but the printed DEM doesnt say anything about its elevation. Use the topographic map (Fig. 9.4) to estimate the elevation of this point as accurately as possible feet Baskahigan Lake (c) A red "x" in Figure 9.5 marks a spot on the shore of Baskahegan Lake, but the printed DEM doesn't say anything about its elevation. Use the topographic map (Fig. 9.4) to estimate the elevation of this point as accurately as possible. feet (d) In Figure 9.4 what are the elevations of the highest point on Hunt Ridge? feet the highest point on Farrow Mountain? feet the intersection of U.S. Route 1 and Maine Route 6 in Topfield? feet • Malcome Bog? _feet (e) What is the relief between Little Tomah Lake and the top of Tomah Mountain? feet ( What is the relief between the surface of East Musquash Lake and the intersection between U.S. Route 1 and Maine Route 6 in Topsfield? feet

Answers

In accordance with Figure, the zenith depth of the crater's boundary is conjectured to be approximately 3200 feet.

Moreover, the nadir height of the crater is thought to be around 2200 feet. This assessment was derived through seeking out the lowest contour line situated within the crater.

How to explain the map

The spot on the shore of Baskahegan Lake marked by the red "X" appears to be at an elevation of approximately 440 feet.

The elevations of the highest point on Hunt Ridge and the highest point on Farrow Mountain are not provided.

The relief between Little Tomah Lake and the top of Tomah Mountain appears to be approximately 480 feet.

The relief between the surface of East Musquash Lake and the intersection between US Route 1 and Maine Route 6 in Topsfield appears to be approximately 280 feet.

Learn more about map on

https://brainly.com/question/25922463

#SPJ1

EXERCISE 2.13 Why Are There More Earthquakes and Volcanoes on One Side of Some Continents Than on the oth Side Name: Course: (a) Are all continental coastlines plate boundaries? Explain (b) Label active continental margins with a red A on the following diagram, and passive margins with a blue Two have been identified to help you get started The Earth's major lithosphere plates Trench or - Ridge Transform Eurasian Plate Scotia Plate Plate Boundary Map of the South Atlantic Ocean floor and adjacent continents Now look in more detail at the east and west coasts of South America in the enlarged bathymetric and topographic map to the right. (c) How far is the easternmost point in South America from the nearest plate boundary? What kind of boundary is it? (d) How far is the westernmost point in South America from the nearest plate boundary? What kind of boundary is it? - (e) Which coast of South America would you expect to have the most frequent earthquakes? Volcanic activity? Explain 1,000 km 51 2.6 ACTIVE VERSUS PASSIVE CONTINENTAL MARGINS

Answers

(a)  No. There does not have to be a plate boundary between ocean crust and continental crust. (c) 1,000km far easternmost point is in South America from the nearest plate boundary.

(d) 512.6 km far the westernmost point in South America from the nearest plate boundary.

(e) West coast of South America has an expectation of having the most frequent earthquakes. It is along an active continental margin.

Not every coastline along a continent is a plate border. The lithospheric plate refers to the several pieces that make up the earth's lithosphere. From a continent's shoreline to a point known as the shelf break, a continental shelf runs. In what is known as the continental slope, the shelf declines from the break towards the deep ocean floor. Continental shelves are a component of the continent even though they are submerged.

To learn more about the continental coastline, click at:

https://brainly.com/question/28315800

#SPJ4

adjust the opacity on the zoomed in region so you can see both the topographic contours and the color of the rocks. the whitish rocks exposed above about 6000 feet here are the upper part of the navajo sandstone. the lower part of the navajo sandstone is pink in color and extends down to an elevation of about 4800 feet. which portion of the navajo sandstone forms steeper slopes?

Answers

As erosion occurs, the lower portion of the Navajo Sandstone is likely to form more gradual slopes, while the upper portion may be more resistant to weathering and form steeper slopes.

To adjust the opacity on the zoomed in region, you can use the settings on your image viewing software or editing tool. By doing so, you can see both the topographic contours and the color of the rocks in the area of interest. In this specific location, the whitish rocks exposed above 6000 feet are the upper part of the Navajo Sandstone, while the lower part, which is pink in color, extends down to an elevation of about 4800 feet.

The steeper slopes in this area would likely be formed by the lower part of the Navajo Sandstone, which is softer and more easily eroded than the upper part. The pink color of this rock indicates the presence of iron oxide, which contributes to its softer composition.

For more about weathering:

https://brainly.com/question/14426457


#SPJ11

comparing these two photographs, which eruption has higher viscosity magma? which type of eruption has the potential of becoming explosive?

Answers

It appears to be a more viscous lava flow than the second photograph. The lava flow in the second photograph appears to be more fluid and less viscous.

In terms of potential explosiveness, the eruption in the first photograph has a higher potential of becoming explosive. This is because eruptions with higher viscosity magma tend to have more gas trapped within them.

As the magma rises to the surface, the pressure decreases and the gas expands rapidly, leading to explosive eruptions. In contrast, eruptions with lower viscosity magma tend to have less gas trapped within them, leading to more gentle eruptions.

However, it is important to note that other factors, such as the size and shape of the vent, can also influence the explosiveness of an eruption.

To know more about lava flow visit:

https://brainly.com/question/30750074

#SPJ11

Which of the following best explains why nuclear fusion requires bringing nuclei extremely close together?
Nuclei normally repel because they are all positively charged and can be made to stick only when brought close enough for the strong force to take hold.
Nuclei are attracted to each other by the electromagnetic force, but this force is only strong enough to make nuclei stick when they are very close together.
Nuclei have to be very hot in order to fuse, and the only way to get them hot is to bring them close together.
Fusion can proceed only by the proton-proton chain, and therefore requires that protons come close enough together to be linked up into a chain.

Answers

The best explanation for why nuclear fusion requires bringing nuclei extremely close together is that nuclei normally repel because they are all positively charged and can be made to stick only when brought close enough for the strong force to take hold.

This is known as the strong nuclear force, which is much stronger than the electromagnetic force that causes nuclei to repel.

Therefore, bringing the nuclei extremely close together allows the strong force to overcome the repulsion and bind the nuclei together in a process known as nuclear fusion.

Hence, the right answer is nuclei normally repel because they are all positively charged and can be made to stick only when brought close enough for a strong force to take hold.

Read more about Nuclear fusion at https://brainly.com/question/12701636

#SPJ11

during spring over north america, there is a general ______ progression of tornado occurrence.

Answers

During spring over North America, there is a general increase in the progression of tornado occurrence.

This is due to the combination of warm and humid air from the Gulf of Mexico meeting with cool and dry air from Canada, creating the perfect conditions for severe thunderstorms and tornadoes. The tornado season in North America typically lasts from March through June, with the peak occurrence in May. However, tornadoes can occur at any time of the year and can strike anywhere in North America. Tornadoes are one of the most destructive and deadly natural disasters, causing significant damage to buildings, infrastructure, and human lives.

To know more about Destructive refer :

brainly.com/question/1615943

#SPJ11

From Hubble's law, what single observation of a galaxy is needed to determine its distance from us?a. massb. luminosityc. recessional velocityd. line broadening

Answers

The correct option is c).

From Hubble's law, the observation that is needed to determine a galaxy's distance from us is its recessional velocity. The law states that the recessional velocity of a galaxy is directly proportional to its distance from us, with a proportionality constant known as the Hubble constant.

By measuring the recessional velocity of a galaxy using spectroscopy, astronomers can estimate its distance from us based on the Hubble constant.

To know more about Hubble's law refer here

https://brainly.com/question/13705068#

#SPJ11

terminal aerodrome forecasts (taf) are issued how many times a day and cover what period of time?

Answers

Terminal aerodrome forecasts (TAF) are typically issued four times a day. These forecasts cover a period of up to 24 hours in advance and are usually updated every six hours.

TAFs provide pilots and air traffic controllers with critical information about weather conditions at the specific airport, including wind speed and direction, visibility, cloud cover, and precipitation.

TAFs are a vital tool for flight planning, as they help pilots make informed decisions about when to take off and land, as well as what type of approach and landing procedures to use. The accuracy of TAFs is essential, as even small deviations from the forecast can have significant impacts on flight safety.

To ensure that TAFs are as accurate as possible, meteorologists use a range of data sources, including satellite imagery, radar, and ground-based weather stations.

Additionally, TAFs are typically reviewed and updated by human forecasters, who have the expertise to interpret complex weather data and make informed predictions about conditions at the airport.

Overall, TAFs play a crucial role in ensuring the safety and efficiency of air travel, and are an essential component of modern aviation weather forecasting.

To know more about Terminal aerodrome forecasts (TAF) refer here

https://brainly.com/question/31670380#

#SPJ11

temperature increases in polar regions are going to be ________ than the global average.

Answers

Temperature increases in polar regions are going to be greater than the global average. This is mainly due to a phenomenon called polar amplification. Polar amplification occurs because of the following factors:

1. Albedo feedback: As ice and snow melt in the polar regions, the exposed darker surfaces (like water and land) absorb more sunlight, leading to further warming and more ice melting. This creates a positive feedback loop, amplifying the temperature increase.

2. Heat transport: The atmospheric and oceanic circulation systems transport heat from lower latitudes to the polar regions, which can cause greater temperature increases in these areas.

3. Increased water vapor: Warmer temperatures cause more evaporation, leading to higher levels of water vapor in the atmosphere. Since water vapor is a greenhouse gas, this contributes to further warming in the polar regions.

As a result, the temperature increases in polar regions are expected to be greater than the global average.

To learn more about  Polar regions - brainly.com/question/2498503

#SPJ11

The reasons for massive influx of foreign manufacturing to China in the 1990s and 2000s include all of the following EXCEPT...

a. low-cost Chinese labor

b. internal Chinese political reforms

c. Establishment of SEZs (special economics zones in Chinese coastal cities)

d. more efficient shipping of goods back from China

e. competition from domestic Chinese companies

Answers

The correct answer is b. internal Chinese political reforms.

The reasons for the massive influx of foreign manufacturing to China in the 1990s and 2000s include all of the following except internal Chinese political reforms. The other reasons include low-cost Chinese labor, the establishment of SEZs in Chinese coastal cities, more efficient shipping of goods back from China, and competition from domestic Chinese companies.

These factors collectively created an attractive business environment for foreign companies seeking to cut costs and improve profitability. The low-cost Chinese labor was a particularly significant draw, as it allowed companies to produce goods at a fraction of the cost compared to developed countries. The establishment of SEZs in Chinese coastal cities provided additional incentives such as tax breaks and streamlined regulations for foreign companies, encouraging them to set up operations in these areas. Additionally, the Chinese government's investment in infrastructure and technology helped to improve the efficiency of transportation and communication, making it easier and cheaper for foreign companies to do business in China.

All these factors combined to create a perfect storm for foreign companies looking to expand their operations in the 1990s and 2000s, leading to China's emergence as a manufacturing powerhouse.

Know more about economic growth:

https://brainly.com/question/1690575

#SPJ11

A stream's ________ is (are) chemically altered and transported.
A) saltation materials
B) bedload
C) traction materials
D) dissolved load
E) suspended load

Answers

A stream's dissolved load is chemically altered and transported.

To answer this question, let's examine each of the terms:

A) Saltation materials: These are particles that are temporarily lifted from the streambed and transported in short hops or jumps. They are not chemically altered during transport.

B) Bedload: This refers to the sediment carried by a stream along the bottom or bed of the channel. It is transported through rolling, sliding, or bouncing, but not through chemical alteration.

C) Traction materials: These are particles that move along the bottom of the stream by sliding, rolling, or dragging. Like bedload, they are not chemically altered during transport.

D) Dissolved load: This is the portion of a stream's total load that consists of ions and molecules dissolved in water. It is chemically altered as the water dissolves minerals from the rocks and soil it comes into contact with. These dissolved materials are then transported with the water downstream.

E) Suspended load: This is the sediment carried within the water column of a stream, typically composed of fine particles like clay and silt. While suspended in the water, these particles are not chemically altered.

In summary, the dissolved load is the component of a stream that is chemically altered and transported.

To know more about chemically altered refer here

https://brainly.com/question/29037431#

#SPJ11

a new children’s park is built by the city of highland. this park is a good that has

Answers

A new children's park built by the city of Highland is a public good.

A public good is a type of good that is non-excludable and non-rivalrous, meaning that it is difficult or impossible to exclude people from using it, and one person's use of the good does not diminish its availability to others. In the case of a children's park, it is difficult to exclude anyone from using the park, and one child's use of the park does not prevent another child from using it.

Public goods are typically provided by the government, as private companies have little incentive to produce them since they cannot charge for their use. The construction and maintenance of a children's park would typically be funded by taxes or other public funds, and would be made available for use by anyone in the community.

Learn more about public good here:

https://brainly.com/question/31433197

#SPJ11

the major difference between floods in humid regions and in dry regions is ________.

Answers

The major difference between floods in humid regions and in dry regions is the frequency and severity.

A flood is when there is an excessive amount of water and it covers normally dry area. The expression "flowing water" can also be used to describe the tide's inflow. Floods are a topic of research in the hydrology field and are very important to the fields of agriculture, civil engineering, and public health.  In humid regions, floods are more frequent and can be caused by heavy rainfall and overflowing rivers, while in dry regions, floods are less frequent but can be more severe and destructive when they do occur due to the lack of vegetation and soil that can absorb the water.

To learn more about Floods, click here:

https://brainly.com/question/31458775

#SPJ11

rafiq selects wells that lie inside pennington county, new jersey. they has performed a(n) ____.

Answers

Rafiq selects wells that lie inside Pennington County, New Jersey. They have performed a(n) analysis or assessment.

They may have conducted a water quality analysis, a geological assessment, or any other relevant evaluation related to wells in the Pennington County, New Jersey area.

The purpose of the analysis or assessment is to gather information on the wells and their surrounding environment, which can help in making informed decisions related to their use and management. For instance, a water quality analysis can help determine if the water from the wells is safe for consumption, while a geological assessment can provide information on the types of rocks and soils present in the area and their potential impact on the wells. This information can be used to develop strategies to protect the wells and their surrounding environment from contamination, erosion, or other potential threats.

Ultimately, the goal of the analysis or assessment is to ensure that the wells in Pennington County, New Jersey are safe and sustainable sources of water for the community.

Know more about analysis:

https://brainly.com/question/30186381

#SPJ11

a rock with a concentration of metal high enough that it may be economically worth mining or a mineral resource (metal or nonmetal) that can be extracted for a profit is called a(n

Answers

A rock with a concentration of metal high enough that it may be economically worth mining, or a mineral resource (metal or nonmetal) that can be extracted for a profit, is called an ore. An ore is a natural occurrence of a material that contains valuable minerals, which can be economically extracted and processed to obtain the desired metal or nonmetal. The concentration of the mineral within the ore is known as its grade, and the higher the grade, the more economically viable it is to mine and process the ore.

The economic feasibility of mining an ore depends on various factors, including the cost of extraction, processing, transportation, and market demand for the metal or nonmetal. Advances in mining technology and increases in market demand can make previously uneconomical deposits viable for mining. Conversely, declining demand or decreasing metal prices can make a once-profitable ore no longer economically viable.

Ores can be found in various geological environments, such as igneous, sedimentary, and metamorphic rocks, and their formation often involves complex geological processes. The location, size, and shape of an ore deposit can impact the mining method and extraction costs. Overall, the term "ore" describes a valuable mineral resource that is economically viable for extraction, processing, and sale in the global market.

Learn more about ores here:

https://brainly.com/question/31459042

#SPJ11

The city of ________ declined from 1.8 million inhabitants in 1950 to 700,000 in 2010.

San Diego

St. Louis

Miami

Detroit

Answers

The city of Detroit declined from 1.8 million inhabitants in 1950 to 700,000 in 2010.

Detroit was once one of the most prosperous cities in the United States, thanks to the growth of the automobile industry. However, since the 1950s, a number of factors, including the decline of the auto industry, deindustrialization, and racial tensions, led to a sharp decline in Detroit's population. The city faced widespread poverty, crime, and urban decay, resulting in a mass exodus of residents to the suburbs. The population of Detroit fell from a peak of around 1.8 million in 1950 to just over 700,000 in 2010. While the city has seen some recent revitalization efforts, the effects of its decline are still felt today.

To know more about deindustrialization,

https://brainly.com/question/22831866

#SPJ11

Do you think the air parcel shown above will rise? Why or why not?

Answers

Since the temperature became warmer, we can expect the air parcel to rise.

Will the air parcel rise?

The condition under which we can expect the air parcel to rise will be if its temperature becomes warmer than the air in the surrounding environment.

From the picture, it is clear that the air parcel had a temperature of 30 degrees Celsius while the troposphere had a temperature of 15 degrees Celsius. Given this condition, we can expect the air parcel to rise because its temperature is higher than the environment.

Learn more about air parcels here:

https://brainly.com/question/14298203

#SPJ1

the early atmosphere on earth is thought to have had very little, if any, _____.

Answers

The early atmosphere on Earth is thought to have had very little, if any, oxygen. Oxygen is a crucial element for life as we know it, but during Earth's early stages, the atmosphere was primarily composed of other gases, such as nitrogen, carbon dioxide, and water vapor.

The lack of oxygen in the early atmosphere can be explained by a few factors:

1. Earth's formation: During the formation of the Earth around 4.6 billion years ago, the planet was hot and volatile. The early atmosphere was formed from volcanic outgassing and the release of gases trapped in the planet's interior, which contained little to no oxygen.

2. Absence of photosynthetic organisms: Oxygen is primarily produced through photosynthesis, a process in which plants, algae, and some bacteria convert carbon dioxide and water into glucose and oxygen using sunlight. Early in Earth's history, these photosynthetic organisms had not yet evolved, so oxygen production was minimal.

3. Oxygen-consuming reactions: Even if small amounts of oxygen were produced in the early Earth's atmosphere, it would have quickly reacted with other chemicals, such as iron and sulfur, to form minerals. This would have prevented the oxygen from accumulating in the atmosphere.

As photosynthetic organisms evolved and began to produce more oxygen, the atmosphere gradually changed, allowing for the development of complex life forms that rely on oxygen for survival.

To learn more about Atmosphere - brainly.com/question/26767532

#SPJ11

The country located on the Jutland Peninsula and the smallest state (in area) in Northern Europe is ____
O Norway
O Denmark
O Paris
O Amsterdam

Answers

Answer:

The country located on the Jutland Peninsula and the smallest state (in area) in Northern Europe is Denmark

What does the North European Lowland include?

The North European Plain extends from the southern United Kingdom east to Russia. It includes parts of France, Belgium, the Netherlands, Germany, Denmark, Poland, the Baltic states (Estonia, Latvia, and Lithuania), and Belarus. Most of the Great European Plain lies below 152 meters (500 feet) in elevation.

Hope this helps :)

Pls brainliest...

urn on the historical imagery like we did for the hopkins area. then put the curser towards the start of the timeline to display an image from sept 7, 1998 what is the rate, in meters/year of seacliff retreat in this area?

Answers

First, you would need to access the historical imagery for the Seacliff area. Once you have turned on the historical imagery, move the cursor towards the beginning of the timeline and display an image from September 7, 1998.

Next, you would need to compare this image with a more recent image to determine the amount of retreat that has occurred over the years. Once you have determined the distance of retreat, you can calculate the rate of retreat in meters/year by dividing the distance of retreat by the number of years between the two images

In 1931, Seacliff was designated as one of the state's first beaches. The park's most well-liked activities for more over 80 years have included oceanfront camping, picnicking, go fishing and informative tours.

To learn more about Beaches, click here:

https://brainly.com/question/28239074

#SPJ11

the strike-slip san andreas fault in california is a _______ fault more than 1,300 km long.

Answers

The strike-slip San Andreas Fault in California is a transform fault more than 1,300 km long.

The San Andreas Fault is indeed a strike-slip fault that extends over 1,300 km along the western coast of California. Strike-slip faults occur when two tectonic plates slide past each other horizontally, without significant vertical displacement.

The San Andreas Fault marks the boundary between the Pacific Plate and the North American Plate and is responsible for a large number of earthquakes in the region. This fault is classified as a transform fault, which means it allows horizontal movement between the two plates.

The movement is not one of the plates moving over or under the other plate. Instead, it is the side-by-side movement that results in the creation of shear forces that can trigger earthquakes.

The San Andreas Fault is a fascinating geological feature that has been extensively studied by scientists to understand the forces that shape our planet. It is also one of the most active faults in the world, with frequent small earthquakes and occasional large ones.

In conclusion, the San Andreas Fault is a long, strike-slip fault in California, with a length of more than 1,300 km. It is a transform fault that allows horizontal movement between the Pacific Plate and the North American Plate, and it is responsible for numerous earthquakes in the region.

Visit here to learn more about Earthquakes:

brainly.com/question/248561

#SPJ11

imagine a metamorphic rock that has been subjected to intense heat and pressure. over time, it gets pulled underground as part of a tectonic plate that is sinking beneath another plate along a convergent boundary. the rock melts as it goes deeper; then the molten rock rises and seeps out of a crack in the ocean floor and hardens. what type of rock is it now? 7.e.6.2 group of answer choices sedimentary igneous metamorphic clastic

Answers

The rock that was initially a metamorphic rock, but melted due to intense heat and pressure, rose to the surface, and then hardened again, is now an igneous rock.

This process is known as the rock cycle, where rocks are continually transformed from one type to another. The metamorphic rock was subjected to intense heat and pressure, which caused it to change its form, and then it was melted due to the increasing temperature as it moved deeper underground. After reaching the surface, it cooled and hardened again to become an igneous rock.a metamorphic rock that has been subjected to intense heat and pressure. over time, it gets pulled underground as part of a tectonic plate that is sinking beneath another plate along a convergent boundary. the rock melts as it goes deeper; then the molten rock rises and seeps out of a crack in the ocean floor and hardens.

Learn more about metamorphic  here:

https://brainly.com/question/14501837

#SPJ11

members of a(n) ________ union have names, but the union itself has no name.

Answers

Members of a labor union have names, but the union itself typically does not have a name.

This is because the union is not an individual entity, but rather a collective group of workers who have come together to negotiate with their employer for better wages, benefits, and working conditions. While unions may have a legal name for organizational and administrative purposes, they are often referred to by their industry or sector, such as the United Auto Workers or the American Federation of Teachers.

The purpose of a labor union is to give workers a stronger collective voice in negotiations with their employer. By joining together, workers can pool their resources and bargaining power to negotiate for better pay and working conditions. Unions can also provide legal representation and support for workers who have been mistreated or discriminated against by their employer.

In summary, while members of a labor union have individual names, the union itself typically does not have a name. Instead, it is referred to by its industry or sector, and serves to give workers a stronger collective voice in negotiations with their employer.

Learn more about  labor union here: https://brainly.com/question/20668733

#SPJ11

Geography GCSE - Use the document to answer the topic.

Assess the relative importance of economic and social causes for the deforestation of the tropical rainforests in Madagascar.


Intro - What is deforestation?

Para 1 - Economic causes for the deforestation of the tropical rainforests.

Para 2 - Social causes for the deforestation of the tropical rainforests.

Conclusion - Own opinion. Overall what is the important cause of deforestation? Social or Environmental causes

Answers

Deforestation exemplifies the permanent devastation of woodlands, often brought on by human practices such as logging, harvesting, mining, and urbanization.

What is deforestation?

This damaging problems affects planet's environment massively as it can encourage damage to soil, lead to decreased biodiversity, and prompt climate change. Plus, deforestation has notable social and economic implications for nearby families that resort to forest goods for their being sustenance.

Economic causes for the deforestation of the tropical rainforests.

The financial impetus behind the wastage of the humid tropic rainforests are prompted mainly by demand for lumber and supplementary forest produce, beyond the growth of farmlands and infrastructure formation. Oversized-scale logging transactions hold the capacity to seriously influence untouched ecosystems, provoking earth erosion, loss of diversity, and heightened releases of greenhouses gases. Furthermore, conversion of wooded surfaces into agricultural land could potentially result in valuable ecosystem businesses, like carbon sequestration or water conformity, fading away.

Social causes for the deforestation of the tropical rainforests.

Another set of activist inducing deforestation pertains toward population burgeon, poverty, and inadequate permission to use the land. Regional prosperity swelling can invest stress on forest supplies as citizens search to extend their own agricultural area and draw out derivatives for survival.

Likewise, deprivation can be a significant instigator of deforestation too, given folks may grab resources undesirably just to meet elementary wants. Inefficient lawmaking of the land intended for consumption can intensify these predicaments by neglecting to secure forestry districts or supplying choice livelihoods for belongings communities.

Overall what is the important cause of deforestation?

In conclusion, it is daunting to single out the prime source of deforestation when it is intricate and multifaceted. Both social and economic changing variables have an essential role to play in triggering deforestation, and treating this predicament will necessitate combined services that target underlying reasons. It is pivotal to balance monetary progress with preservation of ecology, plus to collaborate with regional villages to discover good longterm remedies that serve people and our planet alike.

Read more on deforestation here:https://brainly.com/question/1478703

#SPJ1

Europeans LOVED the imports they got from Southeast Asia. What was one of their most beloved?

-rice and sorghum
-coffee and tea
-wheat and barley
-tobacco and soy

Answers

Rice and sorghum
I think

Answer:

Wheat and Barley

Explanation:

"The East India companies of Europe came seeking the exotic products of Asia: silks, cottons, and precious commodities such as spices and aromatic products. These products required the skilled labor of weavers and farmers or soil and climatic conditions unique to the region."

the major part of this country is made up of the fertile plains of the tigris and euphrates. what is the country

Answers

The major part of the country made up of the fertile plains of the Tigris and Euphrates rivers is Iraq.

A significant river system in Western Asia that empties into the Persian Gulf is the Tigris-Euphrates river system. The Tigris and Euphrates, as well as other lesser tributaries, are its two main rivers.

The riparian nations of Turkey, Syria, Iraq, and Iran make up the 35,600 square kilometers (13,700 square miles) Tigris-Euphrates river basin.

The people of Mesopotamia depended on these rivers to provide drinking water, agricultural irrigation, and important transportation routes amid a large desert. The southern lowlands of what is now Iraq had the richest soil in the Near East thanks to centuries of flooding from the Euphrates and Tigris rivers.

Learn more about Tigris and Euphrates :- https://brainly.com/question/1127341

#SPJ11

Other Questions
what is the fraction equivalent of the ratio of boys to girls in a class if there are 12 boys and 18 girls ? when you copy cells, the original data remains in the original location. select one: true false the stock of wal-mat pays a dividend of $.88. the stock opened at $18.25 and closed at $18.33. the stock yield is: a light bulb used to provide light for workers on an assembly line would be classified as a _____. an overt goal is one that is not directly mentioned in a white paper or e-book. mr. schmidt is teaching statistics and the data lists are long. finding the mean would take a long time so he has decided students may bring a calculator from home to use on the unit test. what can he do to ensure that all students have a device? What would f(x)+2 look like on a graph? 1. a proton is confined to move in a one-dimensional box of length0.200 nm. (a) find the lowest possible energy of the proton. (b)what is the lowest possible energy of an electron confined to thesame box? Three radii of the circle are? _____________ are the total sacrifices that must be made to do something or acquire something. which components are the basis of comparison for measuring the extent to which various kinds of performance are satisfactory? if r(t) = 4t, 3t2, 4t3 , find r (t), t(1), r(t), and r (t) r(t).r'(t) =T(1) =r"(t) =r'(t) x r"(t) = a 0.710-mm-diameter silver wire carries a 50.0 ma current.What are (a) the electric field and (b) the electron drift speed inthe wire?Thanks and see you tomorrow! true or false: if two individuals work equally hard, their wages may differ based on the value of the output they produce. Client is a 22 year old woman brought into the ER by a friend. Client reports of facial swelling and pain especially in teh mouth area, making it difficult to talk and swallow. Her eyes, lips, and tongue appear extremely edematous with erythema. Client is also experiencing pruritis on trunk area and bilateral lower extremities. Hives noted on abdomen and bilateral lower legs. Client states she went to her primary doctor a couple of days ago for signs of a UTI. She was prescribed an antibiotic and has taken two doses so far. She does not remember the name of the medication. Client has a history of hypothyroidism and takes levothyroxine 100 mcg per day. client is alert and oriented with cranial nerves I to XIII intact. Assessment findings: Cardiovascular: Sinus tachycardia. No murmur noted. Respiratory: Tachypnea, auscultated wheezing throughout bilateral lung fields. Gastrointestinal: Positive bowel sounds. Genitourinary: Dark orange color urine, experiencing urinary frequency and nocturia, slight burning and pain when urinating. Peripheral: Widespread hives on bilateral lower extremities. No edema noted. Vital signs: Temp: 98.6 (37C) HR: 110 beats/min, Resp: 22 bpm, BP: 130/86mmHg, O2: 93%.The client appears to have _______ based on the client finding of _____________.Condition choices: Choose one: dysrhythmias, fluid overload, anaphylaxis, asthma, or gastroesophageal reflux disease (GERD).Client Finding: Choose one: gastrointestinal assessment, angioedema, pain upon urination, cranial nerve assessment, or blood pressure your crazy uncle left you a trust that will pay you $26,000 per year for the next 21 years with the first payment received one year from today. if the appropriate interest rate is 5.9 percent, what is the value of the payments today? agents that break up thick mucous secretions of the lungs or bronchi to enable them to be expelled from the system through coughing are called Create a Matlab function named fourser that is invoked to provide the coefficients of the fourier series up to the user-defined Nth value. Specifically, the function header should have a form 1)function [avg,ak,bk,rw,err fourser(t,x,T,N) where t is time, x is the waveform that is being analyzed, T is its fundamental period of the waveform, and N is the number of terms of the fourier series that is desired. ak and bk are the Fourier coeffiecients. rw is the waveform produced by evaluating your N term series, err is the rms error between rw and the x. Note the avg is the average value of x. a company has 500,000 shares of $10 par value common stock outstanding, which originally sold for $12. it purchases as treasury stock 10,000 shares at the current market price of $50. retained earnings total $750,000. what is the company's total stockholders' equity after the treasury stock purchase? the soviets experienced a severe shortage of food during their war recovery because _______.