Match each context to the type of the law that is most suitable for it.

Boyle’s Law

Charles’ Law

Pascal’s Law

(Match them to the context it goes to)

At constant temperature, the volume of a confined gas is inversely proportional to the pressure to which it is subjected.

A change in pressure at an point in an enclosed fluid at rest is transmitted un diminished to all points in the fluid.

At constant pressure, the volume of a confined gas is directly proportional to the absolute temperature.

Answer:

850.8480103 feet

Explanation:

First you take the diameter and find the circumference, which is (2)(pi)(r) plug in your r which is 26/2= 13 so 2(13)(pi) and multiply taht by 125 after that take your answer and divide by 12which is 850.8480103

Answer:

When cars are running

Explanation:

The shop ventilation fan should be turned on when there are smells, dampness, smoke, and other contaminants in the shop environment. Also, when there is excessive temperature and moisture it should be turned on.

Ventilation assists in cooling your attic by pushing away suffocating hot air from within and bringing in cool air from outside. This keeps hot air from entering your home and raises the temperature in your living area, reducing the strain on your air conditioner.

Exhaust fans purify the air by eliminating smells, dampness, smoke, and other contaminants. Also, it avoids Mold that may grow when there is steam and moisture in the air.

Hence, The shop ventilation fan should be turned on when there are smells, dampness, smoke, and other contaminants in the shop environment. Also, when there is excessive temperature and moisture it should be turned on.

Learn more about Ventilation here:

https://brainly.com/question/11471552

#SPJ2

Answer:

False

Explanation:

Waste in the shop such as garbage, can cause air pollution, which causes various respiratory diseases and other adverse health effects on employees, as contaminants are inhaled and absorbed from lungs into other parts of the body.

These toxic substances in air contaminated by waste that are inhaled by employees include carbon dioxide, nitrous oxide and methane.

Thus, reducing waste which constitutes toxic substances helps to eliminate safety hazards for employees.

Answer:

Explanation:

F

Answer:

technical engineering

The different branches of engineering involved in manufacturing a general-purpose elevator are:

1. Mechanical engineering

2. Electrical engineering

3. Civil engineering

4. Industrial engineering

5. Safety engineering

The different branches of engineering involved in manufacturing a general-purpose elevator are:

1. Mechanical engineering: Responsible for the design, construction, and operation of the elevator's mechanical systems.

2. Electrical engineering:  Responsible for the design, installation, and maintenance of the elevator's electrical systems.

3. Civil engineering: Responsible for the design and construction of the elevator's shaftway and hoistway. T

4. Industrial engineering: Responsible for the efficient design and operation of the elevator's manufacturing process.

5. Safety engineering: Responsible for ensuring that the elevator is safe to operate.

Learn more about elevators on:

https://brainly.com/question/30490732

#SPJ2

Answer:

the answer should be 16

Answer:

12 I guess.................

Answer: Orthographic images.  

The front, top and side views are shown; therefore, these images are orthographic images.

Answer: 2.125 in.

Explanation:

Answer:

2 1/8 in is the answer

Answer:

One of the differences is that civil engineering focuses on design elements while structural engineering is more concern on inspecting the materials used for construction. The structural engineers are the one who are supposed to ensure that the materials used for construction can support the design of the structure.

Explanation:

Answer:

We need 154.737 grams of water at 5 ºC to obtain a final temperature of 43 ºC.

Explanation:

From Thermodynamics we know that mixing processes involve the interaction of substance at different temperatures so that thermal equilibrium is reached by cooling down the substance with highest temperature and heating up the subtance with lowest temperature.

Let suppose that mixing occurs at steady state, that is, that system does not have energy interactions with surroundings. According to the First Law of Thermodynamics, we get that energy interactions are represented by:

[tex]H_{L} + H_{H} -H_{R} = 0[/tex]

[tex]H_{L} + H_{H} = H_{R}[/tex] (Eq. 1)

Where:

[tex]H_{L}[/tex] - Enthalpy of cold water, measured in joules.

[tex]H_{H}[/tex] - Enthalpy of hot water, measured in joules.

[tex]H_{R}[/tex] - Enthalpy of mixed water, measured in joules.

Since there are no phase changes, we can expand formula by using the definition of sensible heat. That is:

[tex]m_{L}\cdot c_{w}\cdot T_{L}+m_{H}\cdot c_{w}\cdot T_{H} = m_{R}\cdot c_{w}\cdot T_{R}[/tex]

[tex]m_{L}\cdot T_{L}+m_{H}\cdot T_{H} = m_{R}\cdot T_{R}[/tex] (Eq. 2)

Where:

[tex]m_{L}[/tex], [tex]m_{H}[/tex], [tex]m_{R}[/tex] - Masses of cold, hot and mixed water, measured in grams.

[tex]c_{w}[/tex] - Specific heat of water, measured in joules per gram-Celsius.

[tex]T_{L}[/tex], [tex]T_{H}[/tex], [tex]T_{R}[/tex] - Temperatures of cold, hot and mixed water, measured in Celsius.

But we know from Principle of Mass Conservation that:

[tex]m_{R} = m_{L}+m_{H}[/tex] (Eq. 3)

Then, we simplify (Eq. 2) and clear the mass of cold water:

[tex]m_{L}\cdot T_{L}+m_{H}\cdot T_{H} = (m_{L}+m_{H})\cdot T_{R}[/tex]

[tex]m_{H}\cdot (T_{H}-T_{R}) = m_{L}\cdot (T_{R}-T_{L})[/tex]

[tex]m_{L} = m_{H}\cdot \left(\frac{T_{H}-T_{R}}{T_{R}-T_{L}} \right)[/tex] (Eq. 4)

If we know that [tex]m_{H} = 140\,g[/tex], [tex]T_{L} = 5\,^{\circ}C[/tex], [tex]T_{R} = 43\,^{\circ}C[/tex] and [tex]T_{H} = 85\,^{\circ}C[/tex], the mass of cold water needed to obtain a final temperature is:

[tex]m_{L} = (140\,g)\cdot \left(\frac{85\,^{\circ}C-43\,^{\circ}C}{43\,^{\circ}C-5\,^{\circ}C} \right)[/tex]

[tex]m_{L} = 154.737\,g[/tex]

We need 154.737 grams of water at 5 ºC to obtain a final temperature of 43 ºC.

Answer:

the answer is B ;)

Explanation:

Simple

You are working at taco bell, so hypothetically, you would be reconsidering your life choices while driving god who knows how many beans

Answer:

A. PMC tends to fit the construction purposes for which it was specifically designed.

Explanation:

took the test go it right

Answer:

the brain has diffrent parts so one of them has a connect to the heart so when you fall in love the brain is signaling the heart poison and that posion tells the heart i you react about it and its a example of your heart

Answer:

Ford Raptor

Explanation:

Answer:

you can't spell Btw but anyways i this its any type of jeep  

Explanation:

Answer:

2 8/10TH INCHES

Explanation:

Answer:

its about 2 and a half

Explanation:

Answer:

False

Explanation:

The two most important fields of expertise for their career were not defined as architecture and mathematics by architects.

It offers expertise and expertise to architects and engineers that can not be gained by practicing alone.

answer:

the answer is false

.

Explanation:

If you don't wear your seat belt, you could be thrown into a rapidly opening frontal air bag. Such force could injure or even kill you.

Answer:

1. You get six credit card offers in the mail, and are stoked! You get all the  cards.

2. You find a radical website that promises you the cheapest credit cards  for students, and believe everything you read on the site.

3. You decide to get your first credit card from an online bank with no  local office.

4. You get a credit card without checking how long the "grace period" is.

Explanation:

A person who's easily hoaxed when it comes to getting credit cards shows the mind of a fool. It is very important to be skeptical when getting one or more because credit cards are not all fun and games, but a huge responsibility.

1. Getting six credit cards offer in the mail doesn't necessarily mean you have to get all of them. You need to know which ones have low interest rates and which ones are suitable for you. You also have to know the fees.

2. You don't need to believe everything that is written on internet websites immediately. You have to do more research about the credit card they're offering whether they're actually telling the truth because sometimes, it's just a promotional strategy so people will get one.

3. It is important to get your first credit card from an online bank with a local office. Having a local office makes the company legit. It is also easier to file any complaints about your card through the local office.

4. Checking the "grace period" is important, so you'd know when you're going to pay your credit card dues. It will help you prevent getting charge with overdue fees.

Answer:

18.

Explanation:

well take 7 away from 29 that leaves you with 22 half of 22 is 11 and if the were 7 more boys than girls you would add the 11 and 7 that makes 18 boys and 11 girls in the class

Answer:

With right and left side charts

Explanation:

I was doing research on this exact question, so here is what I have been looking at;

The Cornell method uses a two-column approach. The left column takes up no more than a third of the page and is often referred to as the “cue” or “recall” column. The right column (about two-thirds of the page) is used for taking notes using any of the methods described above or a combination of them. After class or completing the reading, review your notes and write the key ideas and concepts or questions in the left column. You may also include a summary box at the bottom of the page, in which to write a summary of the class or reading in your own words.

Answer:

with right and left  sides

Explanation:

Answer:

cadmuim

Explanation:

Answer:

A. Turning the blade guides to the desired angel

Explanation:

In a horizontal bandsaw, the user moves the blade to sweep an arc from a fixed cutting plane that will produced repeated number of fixed angle cuts.

Using horizontal bandsaw, only straight cuts at a fixed angle can be attained.

Fixed angle cuts can be made from a horizontal bandsaw thus answer choice B is incorrect.

While using the horizontal bandsaw, the work piece is held stationary while the blade slides on the rollers. Thus answer choice C is incorrect.

The material is normally held with claps to a stationary position before a cut is made by the blade that that repeatedly  attains cuts at fixed angle. The vise is not involved. Answer choice D is incorrect.

Hi! Hope you're having a great day!

Can I have brainlist?? :D