Answer:
Velocity is the answer I hope it helps
Explanation:
Answer:
velocity
Explanation:
A mixture of 2.0 moles of H2, 2.0 moles of NH4, 4.0 moles of CO2, and 5.0 moles of
N2 exert a total pressure of 800 torr. What is the partial pressure of each gas in the
mixture respectively?
Answer:
0.01125
Explanation:
:b
Which one(s) are correct for ionic naming? Select all that apply.
O dicopper trichloride
O iron sulfide
O nickel Il carbonate
O strontium iodide
O carbon dioxide
Dominic made the table below to organize his notes about mixtures. A 1-column table. The first column labeled properties of mixtures has entries has no set composition, must have more than one state of matter, must have more than one substance. What mistake did Dominic make? The title should read “Properties of Solutions” because some mixtures do not have all of the properties listed. There is a definite recipe to make each mixture, so the composition of a mixture is set. Although it is possible to have more than one state, it is also possible to have only one state. A single substance can be used to make a mixture if the substance is composed of more than one element.
Answer:
Exxplanation:
Answer:
Although it is possible to have more than one state, it is also possible to have only one state.
Explanation:
4. Write the chemical formula for each of the following:
Calcium oxide - Copper (II) nitrate - Ammonium chloride-
Magnesium sulphate - Copper (1) oxide - Calcium chloride.
Answer:
Calcium oxide: CaO
Copper (II) nitrate: Cu(NO₃)₂
Ammonium chloride: NH₄Cl
Magnesium sulfate: MgSO₄
Copper (I) oxide: Cu₂O
Calcium chloride: CaCl₂
Explanation:
Hello there!
In this case, according the IUPAC rules for naming this inorganic salts, whereas calcium, copper (II), ammonium, magnesium and copper (I) are the cations and oxide, nitrate, chloride and sulfate are the anions, we proceed as follows:
Calcium oxide: CaO
Copper (II) nitrate: Cu(NO₃)₂
Ammonium chloride: NH₄Cl
Magnesium sulfate: MgSO₄
Copper (I) oxide: Cu₂O
Calcium chloride: CaCl₂
Best regards!
What happens to the solar energy absorbed by plants during photosynthesis ?
Answer:
Photosynthesis in plants converts solar energy into chemical energy using electrons and protons from water. in plants involves a series of steps and reactions that use solar energy, water, and carbon dioxide to produce organic compounds and oxygen.
Explanation:
Answer:
its is used to make sugar which plants eat think it goes through like glycose or something
Explanation:
Which of the following molecules has a bent shape?
O A. CO2
O B. H20
O C. BeCl2
O D. NH3
What is the maximum number of electrons that can be identified with each of following sets of quantum numbers? If there are none, enter 0.
give a description of arecent (2018-2020) example of how this problem has displayed itself in your community
Answer:
im not sure go with the first
Explanation:
6. A box measures 11.25 inches in length, 8.1 inches in width and 6.85 inches in height. What is the
volume of the box?
Answer:
I'd say 624.2^3 inches.
Explanation:
What is the molarity of a 250ml KCl solution made by diluting 175mL of a 3.00 M solution?
Answer:
2.1 M
Explanation:
The dilution equation is [tex]M_{s} V_{s} = M_{d} V_{d}[/tex].
[tex]M_{s}[/tex] = the molarity of the sock solution
[tex]V_{s}[/tex] = the volume of the sock solution
[tex]M_{d}[/tex] = the molarity of the diluted solution
[tex]V_{d}[/tex] = the volume of the diluted solution
The stock solution would be what is doing the diluting, so "175 mL of a 3.00 M solution". So [tex]M_{s}[/tex] = 3.00 M. Then: Converting 175 mL to liters: [tex]175 mL * \frac{1 L}{1000mL} = 0.175 L[/tex] (This is [tex]V_{s}[/tex])
And converting 250 mL KCl to liters: [tex]250 mL * \frac{1 L}{1000mL} = 0.250 L[/tex] (This will be [tex]V_{d}[/tex])
Then, we plug in our given into the dilution equation, resulting in:
[tex]3.00 M * 0.175 L = M_{d} * 0.250 L[/tex] (divide both sides by 0.250 L, in order to get [tex]M_{d}[/tex] by itself)
[tex]\frac{3.00 M * 0.175 L}{0.250 L} = M_{d}[/tex]
[tex]M_{d} = 2.1 M[/tex]
So, the molarity of 250 mL KCl made by diluting 175 mL of a 3.0 M solution would be 2.1 M (mol/L).
Hopefully this helped you understand the topic a little bit better. I just finished molarity and dilutions in Chemistry last week. Good luck!
How many atoms are there in two molecules of water?
a. 3
b.4
c.5
d.6
Answer:
the answer is 4
Explanation:
your welcome lol
A solution of HCl is made by dissolving .005 moles of HCl in 50 L of water. What is the pH of the solution? What is the pOH?
PH?
0.0001
4.00
11.00
2.3p
pOH?
2.00
4.00
10.00
12.00
Answer:
pH= 4; pOH= 10
Explanation:
HCl is a strong acid and therefore dissociates completely in a solution of water via HCl + H2O --> Cl- + H3O+.
Because it is a strong acid, [HCl] = [H3O+].
[HCl]= [H3O+]= (0.005 mol)/(50L)= 1.0 x 10^-4
pH= -log[H3O+]
pH= -log(1.0 x 10^-4)= 4
pH + pOH = 14
4 + pOH = 14
pOH= 10
Which of the following is not a cation?
Iron (III) ion
sulfate
Ca²⁺
Mercurous ion
Answer:
sulfate
Explanation:
because it is anions
A wave travels at 22 m/s and has a wavelength of 11 m. What is its frequency
The answer is 2Hz
To calculate frequency, divide the number of times the event occurs by the length of time.
What is the molarity of a solution created by adding 0.75 moles of lithium fluoride to 65 L of solution?
Answer:
Molarity=Moles of solute/volume of solution in Litres
Simply imputing your values
you have
0.75/65
0.0115M.
When a chemical system is at equilibrium, A. the concentrations of the reactants are equal to the concentrations of the products. B. the concentrations of the reactants and products have reached constant values. C. the forward and reverse reactions have stopped. D. the reaction quotient, Picture, has reached a maximum. E. the reaction quotient, Picture, has reached a minimum.
Answer: The correct option is option B (the concentrations of the reactants and products have reached constant values).
Explanation:
CHEMICAL EQUILIBRIUM is defined as a state which is attained in a chemical system where by forward reaction occurs at the same rate with the backward reaction leading to CONSTANT CONCENTRATIONS of the reactants and the products. Chemical equilibrium is achievable in a closed Chemical system so that none of the reactants or products would escape be they gaseous or otherwise.
Chemical equilibrium occurs in a type of reaction called reversible reactions. Reversible reactions is one that can go in either direction depending on the condition of the system. In other words, reactants form products and under favourable conditions products react together to reform the reactants. For example,
3Fe(s) + 4H2O(l) <-------> Fe3O4(s) + 4H2(g)
As the above reversible reaction proceeds, a time is reached when the rate of forward reaction { which is the formation of Fe3O4(s) + 4H2(g)} is equal to the rate of the backward reaction {which is the formation of 3Fe(s) + 4H2O(l)}. At this point, concentrations of the reactants and products have reached constant values.
When a chemical system is at equilibrium then the concentrations of the reactants and products have reached constant values.
What is chemical equilibrium?Chemical equilibrium is a state occur in any reversible reaction, where the rate of forward reaction is equal to the rate of backward reaction and it is represent as:
A + B ⇄ C + D, where
A & B are reactants, and C & D are products.
As the rates are equal in equilibrium state, so the concentration of reactant and product also have constant value as there is no change in the rate.
Hence, option (B) is correct i.e. concentrations of the reactants and products have reached constant values.
To know more about chemical equilibrium, visit the below link:
https://brainly.com/question/13414142
How is heat transferred from one object to another? A. Heat moves from warmer objects to cooler objects. B. Heat moves from cooler objects to warmer objects. c. Heat moves between objects of the same temperature. D. Heat moves back and forth between two objects.
Answer: I believe the answer is A, heat moves from warmer objects to cooler objects. I know for sure it isn’t C or D though so A
The heat is transferred from one object to another as heat moves from warmer objects to cooler objects. The correct option is A.
What is the transfer of heat?There are three ways to transfer heat. They are conduction, convection, and radiation. Heat travels from one body to another body. If the temperature of two objects is different, then the heat travels from higher temperature to lower temperature.
Conduction is the transfer of energy when two objects ate in contact with each other. Convection is a transfer between object and environment. Radiation is when transferred by emission of electromagnetic radiation.
Thus, the correct option is A. Heat moves from warmer objects to cooler objects.
Learn more about the transfer of heat, here:
https://brainly.com/question/13433948
#SPJ5
Using the weather radar map shown here, infer at which lettered point the most likely tornado formation and damage would
occur.
es )
A)
А
B)
B
C С
D
D
Answer:
c
Explanation:
this is because it makes sense
Answer:
d
Explanation:
Psychology is the study of the human brain. A psychoanalyst is a person who
analyzes people's minds. What does the prefix psycho-mean?
A. Related to the brain
B. Related to studying
C. Related to science
D. Related to analysis
(2pts) Post-lab Questions (1pts) 1. Do you expect the solubility of Borax to increase or decrease as temperature increases? Select the option that best explains why. Solubility will increase, because as T increases the − Δ H ∘ R T −ΔH∘RT term becomes smaller therefore K will get larger. Solubility will increase, because as T increases the − Δ H ∘ R T −ΔH∘RT term becomes smaller therefore K will get smaller. Solubility will decrease, because as T increases the − Δ H ∘ R T −ΔH∘RT term becomes smaller therefore K will get smaller. Solubility will decrease, because as T increases the − Δ H ∘ R T −ΔH∘RT term becomes smaller therefore K will get larger. Choose... (1pts) 2. Why was it necessary to make sure that some solid was present in the main solution before taking the samples to measure Ksp? Select the option that best explains why. To make sure no more sodium borate would dissolve in solution. To ensure the dissolution process was at equilibrium. To make sure the solution was saturated with sodium and borate ions. All of the above
Answer:
1. Solubility will increase, because as T increases the − Δ H ∘ R T −ΔH∘RT term becomes smaller therefore K will get larger.
2. To ensure the dissolution process was at equilibrium.
Explanation:
Given that;
ΔG°= -RTlnK
and
ΔG° = ΔH° - TΔS°
So;
-RTlnK = ΔH° - TΔS°
lnK = ΔH°/-RT - TΔS°/-RT
lnK = -(ΔH°/RT) + ΔS°/R
K = e^-(ΔH°/RT) + ΔS°/R
Hence, Solubility will increase, because as T increases the − Δ H ∘ R T −ΔH∘RT term becomes smaller therefore K will get larger.
2.
Since solubility is an equilibrium process, it means that some undissolved solute must be present in order to determine the solubility product correctly.
Solubility is the ability of the solute to dissolve in the solution. As temperature increases, the solubility increases, and the presence of solid ensure dissolution.
What is Gibbs energy?The Gibbs free energy is the change in the energy of a system from the energy present in the reactant towards the product formation.
It is given as,
[tex]\rm \Delta G^{\circ}= \rm -RTlnK \\\\\rm \Delta G ^{\circ} = \Delta H ^{\circ} - T\Delta S ^{\circ}[/tex]
Equating both equations we get:
[tex]\begin{aligned} \rm -RTlnK &= \rm \Delta H ^{\circ} - T\Delta S ^{\circ}\\\\\rm lnK &=\rm -(\dfrac{\Delta H ^{\circ}}{RT}) + \dfrac{\Delta S ^{\circ}}{R}\\\\\rm K &=\rm e^{-(\frac{\Delta H ^{\circ}}{RT}) + \frac{\Delta S ^{\circ}}{R}}\end{aligned}[/tex]
Thus, the solubility of the substance increases with an increase in temperature.
The solubility product is estimated correctly by the equilibrium process that ensures the presence of the undissolved solute particles.
Therefore, 1. option A. solubility increases and 2. option B. to ensure the equilibrium process are the correct options.
Learn more about solubility here:
https://brainly.com/question/14092287
In the process of photosynthesis, sunlight is converted into
Answer:
Chemical energy
Explanation:
By the use of electrons and protons from water
Answer:
chemical energy
Explanation:
Photosynthesis is the process by which organisms that contain the pigment chlorophyll convert light energy into chemical energy which can be stored in the molecular bonds of organic molecules (e.g., sugars). Photosynthesis powers almost all trophic chains and food webs on the Earth.
A cork cell was first observed by Robert Hooke in the year:
O 1556
O 1065
O 1965
O 1665
Answer:
1665
Explanation:
In 1665, Robert Hooke was the first to observe cork cells and their characteristic hexagonal shape, using the first optical microscope, which was invented by him at that time.
What is the pigment that absorbs light energy and make glucose?
Answer: chlorophyll
Explanation: Photosynthetic cells contain chlorophyll and other light-sensitive pigments that capture solar energy.
Is anyone good at chemistry if so can someone help me please ?
(NO LINKS)
As provided in the question, the pH of a solution is equal to the negative logarithm of the H₃O⁺ concentration in the solution (the square brackets denote the molar concentration).
We are given a solution with an H₃O⁺ concentration of 5.6 × 10⁻⁹ M. So, the pH of this solution would be:
pH = -log[H₃O⁺] = -log(5.6 × 10⁻⁹ M) = 8.25.
A pH that is equal to 7 is neutral; less than 7, acidic; and greater than 7, basic. As 8.25 is greater than 7, this solution is basic.
When 3.52 g of bismuth oxide (molar mass - 465.96 g/ml) reacts with excess carbon to form 2.91 g of bismuth metal (molar mass-208.98) according to the equation:
Bi2O3(s) + 3C(s) = 2 Bi(s) + 3 CO(g)
24
What is the percent yield of the reaction?
(Answer to 1 decimal place)
25
Pls help I need help ASAP!!! Be accurate
POINTSSS AND BRAINLIEST IF YOU ANSWER CORRECTLY!!! Write about the law of conservation of energy and where light energy goes. thank you :)
Answer:
The law of conservation of energy states that the total energy is constant in any process. Energy may change in form or be transferred from one system to another, but the total remains the same.
Could you please help me with the two most recent questions of mine on my page? I will give u brainliest and 20 points! :))) X
i really need help with this
Answer:
i hope i can help you with this
Answer: focus in class
Explanation:
:////
BRAINLIEST if answered correctly
Answer:
I would choose E
Explanation:
Chemical reactions occur when chemical bonds between atoms are formed or broken. The substances that go into a chemical reaction are called the reactants, and the substances produced at the end of the reaction are known as the products
web-
What is the name of the structure formed when fertilization occurs?
Answer:
zygote
Explanation:
I got this online
Answer:
ᘔYᘜOTᗴ:=> In human fertilization, a released ovum (a haploid secondary oocyte with replicate chromosome copies) and a haploid sperm cell (male gamete)—combine to form a single 2n diploid cell called the zygote.
ʰᵒᵖᵉ ⁱᵗ ʰᵉˡᵖˢ
[tex] \infty \infty [/tex]