Marc’ favorite ride at Busch Gardens is the Flying Umbrella, which is lifted by a hydraulic jack. The operator activates the ride by applying a force of 72N to a 30cm2 cylindrical piston, which holds the 20,000N ride off the ground. What is the area of the piston that holds the ride?

After the original tube containing the mercury is replaced with a tube having twice the diameter of the original tube the height of the mercury column at one atmosphere of pressure is 760 mm.

The force delivered perpendicularly to an object's surface per unit area across which this force is dispersed is known as pressure. In comparison to the surrounding pressure, gauge pressure represents the pressure. Pressure is expressed to use a multitude of units.

The formula for calculating pressures is P = F / A, or force per unit of the surface area. The Si system for measuring the pressure is the pascal, and the sign for pressure in physical science is p. (symbol: Pa).

To know more about pressure visit:

https://brainly.com/question/15079200

#SPJ4

Explanation:

The total resistance Rt is given by

1/Rt = 1/Ra + 1/Rb + 1/Rc = 1/5 + 1/4 + 1/7 = 0.593

or Rt = 1.69 ohms

The total current I running through the circuit is

I = V/Rt = 2.37 A

The ball accelerates at a constant rate as it moves down the slope because of the constant gravitational force acting on it in a major portion and the rolling tangential force on the object is acting in the smaller form.

Rolling motion of any object occurs when the object starts sliding in a different methods from the other objects such as when the objects starts to roll from the ramp or any other sloppy surface and it rolls down due to the gravitational force and with many other forces such as the rolling tangential force. many forces are acting on the object at the same moment and we are just seeing the gravitational force which is playing a major portion. Hence by this information we can consider that the ball accelerates at a constant rate as it moves down the slope because of the constant gravitational force acting on it in a major portion and the rolling tangential force on the object is acting in the smaller form.

Learn more about Rolling motion:

brainly.com/question/29568301

#SPJ4

The right response is B: To catch a ball, a baseball player moves his or her hand backward in the direction of the ball's motion because  the time of impact is increased.

By doing this, the force of impact on the player's hand is mostly reduced. The force needed to stop the ball will decrease as the amount of time it takes to reach zero motion increases. Consider a ball approaching you with 100 units of momentum. To stop the ball, a 100-unit impulse would be necessary. No matter how the impulse is generated, there must be 100 units of it. A force is an effect that can alter an object's motion in physics.

Learn more about force here

https://brainly.com/question/13191643

#SPJ4

According to Newton's third law of motion the force exerted by the car on the wall and the force by the wall on the car are equal and opposite. But there will be no displacement for the wall.

Collison is a short time force acting between two objects. There are both elastic and inelastic collision. In elastic collision, the kinetic energy and momentum of the colliding system is conserved whereas in inelastic collision, the kinetic energy is not conserved.

For any type of collision, we can apply Newton's third law of motion. This law states that, for every action there is an equal and opposite reaction. Therefore, in a collision, the force exerted by each object will be equal and opposite in direction.

Therefore,  the force exerted by the car on the wall and the force by the wall on the car are equal and opposite. But there will be no displacement for the wall.

Find more on collision:

https://brainly.com/question/4322828

#SPJ1

Answer:

W = 176.4 N

Explanation:

Given that,

The mass of a bowling ball, m = 18 kg

We need to find the weight of the bowling ball on Earth's surface. The weight of an object on the surface of Earth is given by :

W = mg

Where

g is the acceleration due to gravity

Put all the values,

W = 18 × 9.8

W = 176.4 N

So, the weight of the ball on Earth's surface is equal to 176.4 N.

The net resultant force on the airplane, based on the data provided in the question, is 250 N.

Calculate the resultant force by deducting the larger force's size from of the smaller force's magnitude. The direction of the smaller force and the resulting force are identical. The resulting force is useful because it allows us to think about the several forces as as if they were one. To measure the effects of different forces on a thing, in other words.

Given data -

Thrust force = 450 N

headwind (drag) = 200 N

Net force = 450 - 200

Net force = 250 N.

To know more about net force visit :-

brainly.com/question/2136792

#SPJ4

the following blanks are gravitational potential energy and kinetic energy

Gravitational potential energy is the energy that an object has due to its position in a gravitational field.It is given by the equation Ep = mgh, where m is the mass of the object, g is the acceleration due to gravity, and h is the height of the object above a reference point. Kinetic energy is the energy an object possesses by virtue of its motion. It is given by the equation Ek = 1/2mv^2, where m is the mass of the object and v is its velocity.

learn more about Kinetic energy here:

https://brainly.com/question/26472013

#SPJ4

With the Sun and Moon in this position, the side of the earth facing the moon experiences a spring high tide. Thus Option C is the answer.

A spring tide is a tide that occurs when the gravitational pull of the Moon and the Sun are in alignment. During a new moon or full moon phase, the gravitational pull of the Moon and the Sun combine to produce stronger than normal high tides and stronger than normal low tides. The term "spring tide" does not refer to the season of spring, but rather the tide's "springing forth" of water.

During a spring tide, the difference between high tide and low tide is at its greatest, and the water level rises higher and falls lower than during a neap tide. This is because the gravitational pull of the Moon and Sun are working together to produce the tide, rather than against each other. This results in a high tide that is higher than a normal high tide, referred to as a spring high tide.

It is important to note that spring tides occur twice a month, around the time of the new and full moon, when the Moon and Sun are in alignment.

Learn more about Tides:

https://brainly.com/question/29417771

#SPJ4

AAAAAAAAAAAAAAAAAAAAAAAAAAAA

Answer:

Gravity increase:

mass increases

distance decrease

gravity decrease:

mass decrease

distance increase

hope this helps

have a good day :)

Explanation:

The force of gravity between the newborn baby and the doctor is approximately 2.67 x 10^-8 N.

The attraction between two objects in the cosmos is created by the force of gravity. Objects fall towards the center of the earth as a result of this force, which also keeps planets and moons in their orbits around stars. The mass of the objects and the separation between their centers of mass determine how much gravity there is between them.

The force of gravity between two objects is:

F = G * m1 * m2 / r^2

Where F  = force of gravity,

G = gravitational constant (approximately 6.67 x 10^-11 N*(m/kg)^2),

mass m1 and mass m2 are the masses of the objects,

r = distance between their centers of mass.

Given:

the mass of the newborn baby = 2.50 kg,

the mass of the doctor = 80.0 kg,

the distance between them = 0.250 m,

F = (6.67 x 10^-11 N*(m/kg)^2) * (2.50 kg) *(80.0 kg) / (0.250 m)^2

F = 2.67 x 10^-8 N

To learn more about the force of gravity visit:

brainly.com/question/72250

#SPJ4

Using a specific kind of raga played over a gramophone and loudspeakers, Singh replicated the experiment with field crops. Crop sizes grew to 25–60% over the average for the region. According to Singh, the violin's music has the biggest impact on plant development.

Nutrient interactions in the soil, which alter the availability of nutrients to plants, illustrate the range of interactions that may take place. High concentrations of one nutrient in the soil can conflict with the availability and absorption of other nutrients.

Loamy soils, which combine sand, clay, and silt particles, are thought to be the most fertile form of soil.

To know more about plant development visit :-

https://brainly.com/question/29123942

#SPJ4

Answer:

(A) A pitch that is higher than the pitch actually produced

Explanation:

Doppler effect

The end product when equilibrium is reached is a mixture of water and ice at a temperature of 0°C.

Since the temperature of the water is higher than the temperature of the ice, the ice starts to melt and the temperature of the mixture decreases until it reaches the freezing point of 0°C.

The amount of water in the mixture increases due to the melting of the ice while the amount of ice decreases until all of the ice has melted and there is 1.4 kg of water in the mixture.

The heat energy that was released when the ice melted is absorbed by the water, raising its temperature to 0°C and causing it to reach equilibrium.

Learn more about equilibrium:

https://brainly.com/question/19340344

#SPJ4

The object travelled 63 meters at 9m/s for 7 seconds.

The length of the trajectory taken between the initial and final positions of the moving body is the distance traveled.

To calculate the distance traveled by an object traveling horizontally off a cliff, you can use the formula:

d = v * t

where d is the distance traveled, v is the velocity (9 m/s), and t is the time (7 seconds).

By substituting the given values into the formula, we get:

d = 9 * 7 = 63 meters

So, the object traveled 63 meters horizontally before it hit the ground after being launched off the cliff at 9 m/s for 7 seconds.

To know more about distance, visit:

brainly.com/question/13034462

#SPJ1

The maximum efficiency of the engine is a. 65.0%

The maximum efficiency of the heat engine is given by the Carnot efficiency, which is defined as:

Efficiency = (1 - (T cold / T hot)) * 100%

Where T cold is the temperature of the cold reservoir and T hot is the temperature of the hot reservoir.

Plugging in the given temperatures, we get:

Efficiency = (1 - (250 / 715)) * 100% = 65.0%.

So the answer is a. 65.0%.

So, using the temperatures given in the question:

Efficiency = 1 - (250 K/ 715 K) = 1 - 0.349 = 0.651 or 65.1%

Learn more about the efficiency of a heat engine here: https://brainly.com/question/16311666

#SPJ4

The missing forces in the diagram given are: A = 50 N; B = 200 N; C = 1100 N; D = 20 N; E = 300 N; F = 0 N; G = 50 N and H = 0 N.

In physics and engineering, a resultant force is a single force and associated torque obtained by combining a system of forces and torques acting on a rigid body by vector addition. The characteristic of a resultant force or force-torque is that it has the same effect on a rigid body as the original force system. The resulting forces on the body are calculated and visualized by computational analysis or (for sufficiently simple systems) by free-body diagrams.

For A and B:

Since net force is zero the applied forces in all four direction will be equal but opposite.

So A will be 50 N and B will be 200 N.

For C:

The net force is 900 N;

C = 900 + 200

C = 1100 N

For D and E:

The net force is 60 N left; this means the net upward or downward force acting on the object is zero.

So E = 300 N

D = 80 - 60

D = 20 N

For F, G and H:

The net force is 30 N right; this means the net upward or downward force acting on the object is zero.

So F and H will be zero.

G = 20 + 30

G = 50 N

To know more about force, visit:

https://brainly.com/question/28875770

#SPJ1

Answer:

B. Large mountain ranges

Glands that excrete salt in the mangroves are examples of adaptions.

To learn more about population refer to:

https://brainly.com/question/25630111

#SPJ1

Option (a) is correct- The car has about 42% greater momentum than the SUV.

What is momentum ?

As a measure of an object's kinetic energy, momentum is easily defined. Simply put, momentum is the result of mass times velocity. full response Simply said, momentum is concerned with the quantity of motion. The conserved quantity is another definition for it.

What is mass?

Measurement of inertia, a fundamental characteristic of all matter. The resistance a body of matter offers to a change in its speed or location as a result of the application of a force is what it is in essence.

Therefore, Option (a) is correct- The car has about 42% greater momentum than the SUV.

Learn more about momentum from the given link.

https://brainly.com/question/402617

#SPJ4

Answer:

15 seconds :)

Explanation:

At t = 0, the current through the 5.00-Ω resistor is 0 A. At t = 2.17×10-2 s, the current through the resistor is -2.2 A, flowing in the opposite direction to the arrow .

(a) At t = 0, the current through the resistor is 0 A.

(b) At t = 2.17×10-2 s, the current through the resistor is -2.2 A. The negative sign indicates that the current is flowing in the opposite direction to the arrow

(c) At t = 3.00 s, the current through the resistor is 0 A.

At t = 0, the current through the 5.00-Ω resistor is 0 A. At t = 2.17×10-2 s, the current through the resistor is -2.2 A, flowing in the opposite direction to the arrow.At t = 3.00 s, the current through the resistor is 0 A.

learn more about current here

https://brainly.com/question/17120024

#SPJ4

The force that prevents motion between any two surfaces that are contacting is called friction. Every machine has friction because it involves motion. As a result, efficiency is never 100 percent.

Efficiency is the proportion of user-inputted work (input work) that is converted into output work by a machine (output work). Because some of the input work is used to overcome friction, the output work is always less than the input work.

The force that would grow or decrease in the absence of friction is reflected in the ideal mechanical advantage of a machine. It is consistently larger.

To know more about friction visit:-

https://brainly.com/question/13000653

#SPJ1

When a lead rider's left arm is bent at the elbow with their index finger pointing straight up, it means double file formation.

When riding in groups, hand signals are a crucial aspect of communication. The group should create a double-file formation when the lead rider's left arm is bent at the elbow and their index and middle fingers are pointed straight up. Wider hallways are best suited for heavy-headed formations (T-formation with a couple of individuals in front) or double-file formations because soldiers can spread out and walk shoulder to shoulder at the front of the file. When opposing doors are visible, the single file configuration is constricting and slowly moving.

Learn more about elbow here:-

https://brainly.com/question/8720670

#SPJ4

The magnitude of the net acceleration of the pillow is 3.333 m/s^2 .

To determine the magnitude of the net acceleration of the pillow, we can use Newton's Second Law of Motion, which states that the net force acting on an object is equal to the mass of the object multiplied by its acceleration:

Fnet = ma

where

Fnet = net force acting on the pillow

m = mass of the pillow (0.30 kg)

a = acceleration of the pillow

Fnet = FStephanie - FEileen = 10 N - 11 N = -1 N

So, the net force acting on the pillow is -1N

Now, we can use Newton's Second law to find the acceleration of the pillow

a = Fnet/m = -1 N / 0.3 kg = -3.333 m/s^2

Therefore, the magnitude of the net acceleration of the pillow is 3.333 m/s^2 .

To know more about Acceleration visit :

brainly.com/question/12550364

#SPJ4

The object's momentum will vary by an amount equal to 80 N-s.

Describe momentum.

The relationship between a particle's mass and velocity determines its momentum. Having both a force and motion, it has both a direction and a magnitude. The force exerted on a particle is equal to the rate at which its momentum is gaining momentum over time, according to Isaac Newton's second equation of motion.

Newton's second law states that if a steady force acts on a particle for a predetermined period of time, the impulse, which is the result of the force and the intervals (the impulse), is equal to the change in momentum.

The time it would take a constant action to bring a particle to rest, on the other hand, is the measure of a particle's momentum.

According to the details in the query,

The system's starting momentum is 0.

F = ma

a = F/m

a = 10/6

a = 1.67 m/s²

utilize the motion equation,

v = u + at

v = u + (1.67)(8) (8)

v = 13.33 m

The momentum will then be,

p = mv

p = 6 × 13.33

p = 80 N-s.

To learn more about Momentum from given link

https://brainly.com/question/27020102

#SPJ4

Explanation:

Let a be the sphere of mass 10 kg and b be the sphere of mass 20 kg. According to Newton's universal law of gravitation, the gravitational force of a on b is expressed as:

F

a

b

=

G

m

M

d

2

, where:

G

=

6.67

×

10

−

11

N

m

2

/

k

g

2

is the gravitational constant

m = 2 kg is the mass of a

M = 10 kg is the mass of b

d = 0.2 m is the separation between the two spheres

So:

Fab=GmMd26.67

×

10

−

11

×

2

×

10

0.2

2

Answer: b, c, and e

explaination: because i took the test

The evidence supports that the continental plates come together and break apart over time are The shape of the continental plates appear to fit together like large pieces of a puzzle, Trenches and mountain ranges beneath the ocean show a changing landscape from tectonic motion, Distribution of similar fossils from the same time period can be found geographically distributed long distances apart.

The  continental plate are less denser as they are comprised of relatively denser minerals, the plates namely the continental and the oceanic plate collides, forms a subduction zone.

continental tectonic plates have a convergent plate boundary is thicker, while the oceanic is denser, lower positioned, and less thick,  the oceanic plate sink below the continental plate, in a process known as subduction.

the continental plate lifting up, resulting in the formation of mountain chains.

For more details regarding continental plates  , visit

https://brainly.com/question/3994513

#SPJ6