- Look at the part of your circuit that connects the battery, switch, and red bulb.


Do you have them wired in series or parallel?

As a result, the motorbike wheel takes roughly 0.513 seconds to attain an angular velocity of 95.0 rad/s.

The first step in solving this problem is to find the moment of inertia of the motorcycle wheel. We can use the formula for the moment of inertia of an annular ring:

I = (1/2)mr^2, where m is the mass of the wheel and r is the average radius of the ring, which is (0.325 m + 0.275 m)/2 = 0.3 m.

Plugging in the values, we get:

I = (1/2)(12.0 kg)(0.3 m)^2 = 0.54 kg m^2

Next, we can use the formula for torque to find the net torque acting on the wheel:

τ = Fr, where F is the force exerted by the drive chain and r is the radius at which the force is applied.

Plugging in the values, we get:

τ = (2,000 N)(0.05 m) = 100 Nm

Finally, we can use the rotational kinematics equation to find the time it takes for the wheel to reach an angular velocity of 95.0 rad/s, starting from rest:

ω = ω0 + αt, where ω0 is the initial angular velocity (which is zero), α is the angular acceleration, and t is the time.

We can rearrange this equation to solve for t:

t = (ω - ω0)/α

The angular acceleration α is related to the net torque τ and the moment of inertia I by the formula:

α = τ/I

Plugging in the values, we get:

α = 100 Nm / 0.54 kg m^2 = 185.2 rad/s^2

Now we can plug in all the values to find t:

t = (95.0 rad/s - 0)/185.2 rad/s^2 = 0.513 s

Therefore, it takes approximately 0.513 seconds for the motorcycle wheel to reach an angular velocity of 95.0 rad/s.

To learn more about : angular velocity

https://brainly.com/question/29342095

#SPJ11

Answer:

there is a slight chance for them to reappear again tonight

During a new moon, the moon is located between the sun and the Earth. The illuminated side of the moon is facing away from the Earth and towards the sun, so it is not visible from the Earth.

The side of the moon facing the Earth is in shadow, which is why a new moon is not visible in the night sky. The alignment of the sun, Earth, and moon during a new moon is also what causes a solar eclipse, when the moon passes directly in front of the sun, blocking its light from reaching the Earth.

To know more about illuminated side refer here

https://brainly.com/question/30371476#

#SPJ11

The specific gravity of the oil is approximately 1.985, the density of the oil is approximately 1985 kg/m³, and the specific weight of the oil is approximately 19458 N/m³

To determine the specific gravity, density, and specific weight of the oil, we need to follow these steps:

Step 1: Calculate the weight of the water and oil
Weight of water = Weight of can filled with water - Weight of empty can
Weight of water = 440 N - 45 N = 395 N

Weight of oil = Weight of can filled with oil - Weight of empty can
Weight of oil = 830 N - 45 N = 785 N

Step 2: Calculate the volume of the can using the weight of water
Volume of the can = (Weight of water) / (Specific weight of water at 4°C)
The specific weight of water at 4°C is approximately 1000 kg/m³ × 9.81 m/s² = 9810 N/m³
Volume of the can = 395 N / 9810 N/m³ ≈ 0.0403 m³

Step 3: Calculate the density of the oil
Density of oil = (Mass of oil) / (Volume of the can)
To find the mass of oil, we first need to find the weight of oil in terms of mass:
Mass of oil = Weight of oil / g (where g = 9.81 m/s², the acceleration due to gravity)
Mass of oil = 785 N / 9.81 m/s² ≈ 80 kg

Density of oil = 80 kg / 0.0403 m³ ≈ 1985 kg/m³

Step 4: Calculate the specific weight of the oil
Specific weight of oil = Density of oil × g
Specific weight of oil = 1985 kg/m³ × 9.81 m/s² ≈ 19458 N/m³

Step 5: Calculate the specific gravity of the oil
Specific gravity of oil = (Density of oil) / (Density of water at 4°C)
Specific gravity of oil = 1985 kg/m³ / 1000 kg/m³ ≈ 1.985

To know more about the specific gravity, click here;

https://brainly.com/question/31485690

#SPJ11

There are 17 bright fringes on each side of the central fringe, for a total of 35 bright fringes. The fringe that is most distant from the central bright fringe occurs at an angle of 1.01° relative to the original direction of the beam.

Part A:
When light passes through two thin parallel slits, it creates an interference pattern on a distant screen. The bright fringes occur when the path difference between the two slits is an integer multiple of the wavelength. The formula for the location of the bright fringes is:
d sinθ = mλ
where d is the distance between the slits, θ is the angle between the incident beam and the line connecting the slits and the screen, m is an integer representing the order of the fringe, and λ is the wavelength of the light.
For this problem, d = 1.02×10^−2 mm and λ = 580 nm = 5.80×10^-7 m. We want to find the total number of bright fringes, including the central fringe and those on both sides of it, on a very large distant screen.
The maximum value of sinθ is 1, which occurs when θ = 90°. Plugging in the values, we get:
1.02×10^−2 mm × sin90° = m × 5.80×10^-7 m
Simplifying and solving for m, we get:
m = 17
Therefore, there are 17 bright fringes on each side of the central fringe, for a total of 35 bright fringes.
Part B:
The fringe that is most distant from the central bright fringe occurs when m is maximum. From Part A, we know that the maximum value of m is 17. Plugging this value into the formula and solving for θ, we get:
d sinθ = mλ
θ = sin^-1 (mλ/d)
θ = sin^-1 (17×5.80×10^-7 m / 1.02×10^-2 mm)
θ = 1.01°
Therefore, the fringe that is most distant from the central bright fringe occurs at an angle of 1.01° relative to the original direction of the beam.

Learn more about fringes here:-

https://brainly.com/question/31315270

#SPJ11

The final volume of the gas, is 0.065 m³.

The work done by the gas is 2.629 kJ.

The final volume of the gas, is calculated as follows;

PV = nRT

where;

P₁V₁ = P₂V₂

V₁ = (nRT)/P₁

V₁ = (2 mol x 8.31451 J/K·mol x 367 K) / (0.6 atm x 101325 Pa/atm)

V₁ = 0.1 m³

The final volume of the gas is calculated as;

V₂ = (P₁V₁)/P₂

V₂ = (0.6 atm x 0.1) / 0.92 atm

V₂ = 0.065 m³

The work done by the gas is calculated as;

W = -∫PdV

W = -nRT ln(V₂/V₁)

W = -(2 mol  x 8.31451 J/K·mol x 367 K) x ln(0.065/0.1)

W = 2,629 J

W = 2.629 kJ

Learn more about final volume of gas here: https://brainly.com/question/25736513

#SPJ1

The linear velocity of the boy's toes during a cartwheel is 2.29 m/s. This demonstrates the relationship between centripetal force, radius, and velocity in circular motion.

To determine the linear velocity of a boy's toes during a cartwheel, we can use the formula for centripetal force and the formula for linear velocity. Centripetal force is given by [tex]F = mv^2/r[/tex], where m is the mass of the object, v is its velocity, and r is the radius of the circular motion.

In this case, the boy's toes are moving in a circular path during the cartwheel and are experiencing a centripetal force of 5.0 m/s².

To find the linear velocity of the boy's toes, we need to first calculate the radius of the circular path they are following. The length of the boy from his toes to the end of his fingers is 2.1 m, so the radius of the circular path is half this length, or 1.05 m.

Using the formula for centripetal force, we can solve for the velocity of the boy's toes as follows:

[tex]F = mv^2/r[/tex]

[tex]5.0 \;m/s^2 = m v^2 / 1.05 \;m[/tex]

[tex]v^2 = (5.0 \;m/s^2) \times 1.05 m[/tex]

[tex]v = \sqrt{(5.25)} m/s[/tex]

v = 2.29 m/s (rounded to two decimal places)

Therefore, the linear velocity of the boy's toes during a cartwheel is 2.29 m/s. This demonstrates the relationship between centripetal force, radius, and velocity in circular motion.

To know more about velocity refer here:

https://brainly.com/question/19979064#

#SPJ11

According to the question the angular velocity of OA when it reaches the vertical position is given by ω.

Velocity is a measure of the rate of change in the position of an object over time. It is a vector quantity, meaning it has both magnitude (or length) and direction. Velocity is the speed of an object in a given direction. It is calculated by dividing the distance traveled by the time taken to travel that distance.

Let ω be the angular velocity of OA when it reaches the vertical position.

The angular momentum of the system about the center of mass G is given by:

[tex]L_G = I_G \omega + M[/tex]

where [tex]I_G[/tex] is the moment of inertia of the crank OA about G.

The moment of inertia of the crank OA about G is given by:

[tex]I_G = m_oa r_o^2 + m_ab l^2[/tex]

where [tex]m_{oa[/tex] is the mass of the crank OA, l is the length of the uniform slender bar AB, and [tex]r_o[/tex] is the radius of gyration of the crank OA about O.

The angular momentum of the system about the center of mass G due to the 12-kg uniform slender bar AB is given by:

[tex]L_G = m_{ab} v l[/tex]

where v is the speed of point B when OA swings through the vertical position.

By equating the two angular momentum equations, we have:

[tex]m_oa r_o^2 \omega + M = m_{ab} v l[/tex]

Rearranging the above equation, we obtain:

[tex]M = m_oa r_o^2 \omega + m_ab v l[/tex]

Substituting known values, we get:

[tex]M = 8 kg \times (0.22 m)^2 \times \omega + 12 kg \times 8 m/s \times 1 m[/tex]

[tex]M = 1.76 kg m^2/s^2 \omega + 96 kg m/s^2[/tex]

Thus, the magnitude of the torque M is given by:

[tex]M = 1.76 kg m^2/s^2 \omega + 96 kg m/s^2[/tex]

The angular velocity of OA when it reaches the vertical position is given by:

[tex]\omega = (M - 96 kg m/s^2) / (1.76 kg m^2/s^2)[/tex]

Substituting the known value for M, we get:

[tex]\omega = (1.76 kg m^2/s^2 \omega + 96 kg m/s^2 - 96 kg m/s^2) / (1.76 kg m^2/s^2)\\\omega = 1.76 kg m^2/s^2 \omega / 1.76 kg m^2/s^2\\\omega = \omega[/tex]

Hence, the angular velocity of OA when it reaches the vertical position is given by ω.

To learn more about velocity

https://brainly.com/question/80295

#SPJ4

The recoil velocity of the soda bottle is -10 m/s

To find the recoil velocity of the soda bottle, we'll need to use the conservation of momentum principle. The initial momentum of the system is zero since both the soda bottle and rubber stopper are initially at rest. The equation for conservation of momentum is:

m1v1 + m2v2 = 0

Where m1 and v1 are the mass and velocity of the soda bottle, and m2 and v2 are the mass and velocity of the rubber stopper. We know the masses and the velocity of the rubber stopper, so we can plug in those values:

(0.1 kg) * v1 + (0.01 kg) * (100 m/s) = 0

Now, solve for v1 (the recoil velocity of the soda bottle):

0.1 kg * v1 = -1 kg*m/s
v1 = -1 kg*m/s / 0.1 kg
v1 = -10 m/s

The recoil velocity of the soda bottle is -10 m/s, with the negative sign indicating that it moves in the opposite direction to the rubber stopper.

To learn more about velocity, refer below:

https://brainly.com/question/17127206

#SPJ11

The first bright fringe occurs at an angle of approximately 1.564° away from the Centerline in a two-slit experiment using monochromatic coherent light with a wavelength of 600 nm and slits separated by 2.20 x 10^-5 m.

In a two-slit experiment, we observe interference patterns created by monochromatic coherent light. The angle at which the first bright fringe occurs can be found using the formula for constructive interference:

d * sin(θ) = m * λ

Here,
d = distance between the slits (2.20 x 10^-5 m)
θ = angle of the bright fringe from the centerline
m = order of the fringe (m=1 for the first bright fringe)
λ = wavelength of the light (600 nm or 6.00 x 10^-7 m)

Now, rearrange the formula to solve for θ:

sin(θ) = (m * λ) / d

Substitute the values:

sin(θ) = (1 * 6.00 x 10^-7 m) / (2.20 x 10^-5 m)

sin(θ) ≈ 0.0273

Now, find the angle θ:

θ = arcsin(0.0273)

θ ≈ 1.564°

So, the first bright fringe occurs at an angle of approximately 1.564° away from the centerline in a two-slit experiment using monochromatic coherent light with a wavelength of 600 nm and slits separated by 2.20 x 10^-5 m.

To Learn More About Centerline

https://brainly.com/question/14783097

SPJ11

The range of powers for your camera's zoom lens is approximately 4.9 to 12.5 diopters. This means that the lens can focus on objects at different distances, providing flexibility and versatility when capturing images.

To find the range of powers of your camera's zoom lens, we need to first understand what the terms "focal length" and "power" mean.

Focal length (measured in millimeters) refers to the distance between the lens and the image sensor when the subject is in focus. In your case, the zoom lens has an adjustable focal length ranging from 80.0 to 205 mm.

Power (measured in diopters, or D) is a unit that describes the focusing ability of a lens. It is the inverse of the focal length (in meters). To find the power, we'll use the formula:

Power (D) = 1 / Focal Length (m)

Let's find the range of powers for your camera's zoom lens:

1. Convert the focal lengths to meters: 80.0 mm = 0.080 m, 205 mm = 0.205 m
2. Calculate the power for the minimum focal length: Power (D) = 1 / 0.080 m ≈ 12.5 D
3. Calculate the power for the maximum focal length: Power (D) = 1 / 0.205 m ≈ 4.9 D

For more about camera's zoom lens:

https://brainly.com/question/23841317

#SPJ11

The ride's spring constant is 8625 N/m.

The Nerf gun's spring has a spring constant of 920 N/m.

To find the spring constant:

F = kx

where F = force applied to the spring, k = spring constant, and x = displacement of the spring.

Find the force applied to the spring, using Newton's second law:

F = ma

where m = combined mass of the Peas and their car, and a = acceleration of the car as it comes to a stop.

Since the car is initially moving at a constant velocity of 1.0 m/s, its initial acceleration is 0 m/s². Therefore, the only acceleration acting on the car is the deceleration caused by the spring.

To find the deceleration, using the equation:

v² = u² + 2as

where v = final velocity (0 m/s), u = initial velocity (1.0 m/s), a = acceleration, and s = displacement (0.20 m).

Rearranging this equation to solve for a:

a = (v² - u²) / (2s) = (0 - 1.0²) / (2 x 0.20) = -2.5 m/s²

Using Newton's second law to find the force applied to the spring:

F = ma = 690 kg × (-2.5 m/s²) = -1725 N

Finally, use the formula F = kx to solve for k:

k = F / x = -1725 N / (-0.20 m) = 8625 N/m

Therefore, the spring constant of the ride is 8625 N/m.

3) To find the spring constant, use the formula:

v = √(kx² / m)

where v = velocity of the dart, k = spring constant, x = displacement of the spring (0.04 m), and m = mass of the dart (0.92 g = 0.00092 kg).

Solving for k:

k = m v² / x² = 0.00092 kg × (16 m/s)² / (0.04 m)² = 920 N/m

Therefore, the spring constant of the spring used in the Nerf gun is 920 N/m.

Find out more on spring constant here: https://brainly.com/question/1968517

#SPJ1

The rocket should be launched about 12.3 meters to the left of the hoop to pass through it.

First, we need to calculate the time it takes for the rocket to reach the height of the hoop. We can use the kinematic equation:

y = v₁t + 1/2a*t²

Where y is the vertical displacement (20 m), v₁ is the initial vertical velocity (0 m/s), a is the acceleration due to gravity (-9.8 m/s²), and t is the time it takes to reach the height of the hoop.

Plugging in the values, we get:

20 m = 0 + 1/2*(-9.8 m/s²)*t²

Solving for t, we get:

t = √(40/9.8) ≈ 2.02 s

Now we can use the horizontal distance formula:

d = v₁t + 1/2a*t²

Where d is the horizontal distance, v₁ is the initial horizontal velocity (3.0 m/s), and a is the horizontal acceleration due to the rocket engine (unknown).

We know that the vertical thrust of the rocket engine (8.0 N) is equal to the weight of the rocket, so we can find the horizontal acceleration using:

a = F/m = 8.0 N / 0.5 kg = 16 m/s²

Plugging in the values, we get:

d = 3.0 m/s * 2.02 s + 1/2 * 16 m/s² * (2.02 s)²

d ≈ 12.3 m

To know more about thrust, here

brainly.com/question/15190995

#SPJ4

Answer:

Explanation:

The correct answer is A) Johann Winckelmann. Johann Winckelmann, a German art historian and archaeologist, assisted Anton Raphael Mengs with the iconography of his ceiling fresco, Parnassus, in the Villa Albani

The plasma tail of a comet always points away from the Sun due to a phenomenon called the solar wind. The solar wind is a stream of charged particles, primarily protons and electrons, emitted by the Sun. As the solar wind interacts with the coma (the gas and dust surrounding the comet's nucleus), it exerts a force on the charged particles in the coma, causing them to be pushed away from the Sun.

Here's a more detailed explanation of the process:

1. Solar Wind: The Sun continuously emits a stream of charged particles, primarily protons and electrons, known as the solar wind. The solar wind extends throughout the solar system.

2. Coma Formation: As a comet approaches the Sun, the solar radiation and heat cause the icy nucleus of the comet to vaporize and release gas and dust. This forms a cloud-like region around the nucleus called the coma.

3. Solar Wind Interaction: The charged particles in the solar wind carry an electric charge and have a magnetic field associated with them. When the solar wind encounters the coma of the comet, it interacts with the charged particles in the coma.

4. Ionization and Pressure: The solar wind interacts with the coma, ionizing some of the gas molecules and creating a region of plasma. The solar wind exerts pressure on the plasma and the ionized gas molecules.

5. Radiation Pressure and Magnetic Field: The solar wind exerts a force on the plasma and ionized gas particles in the coma. This force is known as radiation pressure. Additionally, the solar wind's magnetic field also plays a role in guiding the plasma and ionized particles.

6. Tail Formation: The combined effects of radiation pressure and the magnetic field cause the plasma and ionized gas particles to be pushed away from the Sun. This creates a tail that extends in the direction opposite to the Sun, which is referred to as the plasma tail of the comet.

Overall, the interaction between the solar wind and the charged particles in the coma of the comet causes the plasma tail to always point away from the Sun, regardless of the comet's motion through space.

To know more about plasma  refer here

https://brainly.com/question/8746180#

#SPJ11

The horizontal velocity of the golf ball as it rolled off the table was 4.82 m/s.

We can solve this problem using the kinematic equations of motion for constant acceleration, assuming that the only acceleration acting on the golf ball is due to gravity. We can break the motion of the golf ball into two components; a horizontal component and a vertical component.

Let's start with the vertical component of the motion. The vertical distance the golf ball falls from the desk to the ground is 1 meter. We can use the following kinematic equation to find the vertical component of the velocity of the golf ball just before it hits the ground;

d = vit + 1/2 at²

where d is the distance fallen, vi is the initial vertical velocity (which is zero), a is the acceleration due to gravity (-9.81 m/s²), and t is the time it takes to fall 1 meter.

Solving for t, we get;

t = √(2d/a) = √(2 × 1 m / 9.81 m/s²)

= 0.451 s

Now that we know the time it takes for the golf ball to fall 1 meter, we can use the horizontal distance it travels (1.35 meters) and the time it takes to fall (0.28 seconds) to find the horizontal component of the velocity:

v = d / t = 1.35 m / 0.28 s

= 4.82 m/s

Therefore, the horizontal velocity of the golf ball is 4.82 m/s.

To know more about horizontal velocity here

https://brainly.com/question/18084516

#SPJ1

The electric force experienced by an electron in the hydrogen atom is significantly stronger than the gravitational force experienced by the electron.

The electric force is responsible for holding the electron in orbit around the nucleus, while the gravitational force between the two is negligible. This is due to the fact that the electric force is much stronger than the gravitational force, by a factor of approximately 10^36.

This means that the electric force is the dominant force acting on the electron in the hydrogen atom, and determines its behavior within the atom. The strength of the electric force is determined by the charges of the particles involved, while the strength of the gravitational force is determined by their masses. Since the electron is much lighter than the nucleus, the gravitational force between the two is negligible in comparison to the electric force.

In summary, the electric force experienced by an electron in the hydrogen atom is much stronger than the gravitational force experienced by the electron, and is the dominant force responsible for the electron's behavior within the atom.

For more about electric force:

https://brainly.com/question/31696602

#SPJ11

The acceleration due to gravity on the surface of Titan can be calculated using the formula g = GM/[tex]R^{2}[/tex], where G is the gravitational constant, M is the mass of the moon, and R is the radius of the moon. Therefore, the correct answer is B.

Plugging in the given values, we get g = (6.67 x [tex]10^{-11}[/tex] [tex]Nm^{2}/kg^{2}[/tex])(1.35 x [tex]10^{23}[/tex] kg)/[tex](2.58* 10^{6}m)^{2}[/tex] = 3.49 [tex]m/s^{2}[/tex].

This means that an object on the surface of Titan would experience a gravitational acceleration of 3.49 [tex]m/s^{2}[/tex], which is about one-seventh of the acceleration due to gravity on Earth.

To know more about gravitational acceleration, refer here:

https://brainly.com/question/30429836#

#SPJ11

Ultraviolet light exhibits shorter wavelengths compared to visible light, infrared waves, or radio waves.

A wavelength is a measure of the distance between two corresponding points on a wave. Ultraviolet light is a type of electromagnetic radiation with wavelengths shorter than visible light but longer than X-rays. Visible light is the portion of the electromagnetic spectrum that is visible to the human eye and has wavelengths between approximately 400 and 700 nanometers. Infrared waves are longer than visible light and have wavelengths between approximately 700 nanometers and 1 millimeter. Radio waves have the longest wavelengths in the electromagnetic spectrum, ranging from about 1 millimeter to more than 100 kilometers.

Visible light is the portion of the electromagnetic spectrum that is visible to the human eye. It ranges in wavelength from approximately 400 to 700 nanometers and is responsible for the colors we see in the world around us. When white light passes through a prism or water droplets, it is separated into the various colors of the visible spectrum: red, orange, yellow, green, blue, indigo, and violet.

Therefore, Compared to radio waves, infrared waves, or visible light, ultraviolet light has shorter wavelengths.

To learn more about Electromagnetic radiation click:

brainly.com/question/10759891

#SPJ1

The speed of the wave in the string if it takes the full length for the lowest note on a piano (27.5 Hz) is 33 m/s.

What is Wave?

A wave is a disturbance or variation that travels through a medium, transferring energy from one point to another without the overall movement of the medium itself. Waves can take many forms and occur in many different physical systems, such as water waves on the surface of a lake, sound waves traveling through the air, or electromagnetic waves (such as light) traveling through space.

This is much higher than the speed of sound in air (343 m/s at room temperature), which means that the wave travels through the string much faster than it would through the air. However, this speed is not the speed of the wave we are interested in, since it would only apply if the wave were traveling along an infinitely long string. In reality, the wave is confined to the length of the string, so its speed is lower.

To find the speed of the wave in the string, we need to consider the effect of the boundary conditions at the ends of the string. The ends of the string are fixed, which means that the wave must have a node at each end. This reduces the effective length of the string to (1/2)λ:

L' = (1/2)λ = (1/2)(2.40 m) = 1.20 m

Now we can calculate the speed of the wave in the string:

v = fλ = (27.5 Hz)(1.20 m) = 33 m/s

To know more about Wave visit;

https://brainly.com/question/15663649

#SPJ4

The power required to run the compressor is 18,506 W or approximately 18.5 kW, calculated using the rate of heat transfer through the insulation and the efficiency of the refrigerator.

To determine the power required to run the compressor, we need to consider the heat transfer that occurs through the insulation and the temperature difference between the interior of the refrigerator and the room.

First, we can calculate the rate of heat transfer through the insulation using the formula:

Q = kA (ΔT / d)

where Q is the rate of heat transfer, k is the thermal conductivity of the insulation material, A is the surface area of the refrigerator, ΔT is the temperature difference between the interior and exterior of the refrigerator, and d is the thickness of the insulation. Plugging in the given values, we get:

Q = (0.0119 J/m·s·°C) × (2.6 m²) × ((46.5°C - 8.5°C) / 0.045 m)

Q = 581.6 W

This represents the rate at which heat is flowing into the refrigerator from the warmer surroundings. To maintain the interior temperature at 8.5°C, the refrigerator must remove this heat at the same rate.

The ratio of the heat extracted from the interior to the work done by the motor is 3.8% of the theoretical maximum. The theoretical maximum is given by the Carnot efficiency, which is:

η = 1 - (T_cool / T_hot)

where T_cool is the temperature inside the refrigerator and T_hot is the temperature outside. Plugging in the given values, we get:

η = 1 - (8.5°C / 46.5°C) = 0.8172

So the actual efficiency of the refrigerator is:

ε = 0.038 × 0.8172 = 0.0314

This means that for every 1 W of power consumed by the motor, the refrigerator extracts 0.0314 W of heat from the interior. Therefore, the power required to run the compressor is:

P = Q / ε = 581.6 W / 0.0314 = 18,506 W

So the power required to run the compressor is 18,506 W or approximately 18.5 kW.

To learn more about compressors

https://brainly.com/question/31672001

#SPJ4

6. The change in temperature is -5°C, which indicates a decrease of 5°C. and 7. The energy needed is 180.6 Joules.

6. To find the change in temperature, you need to subtract the final temperature from the initial temperature:

Change in temperature = Final temperature - Initial temperature
Change in temperature = 25°C - 30°C
Change in temperature = -5°C

The change in temperature is -5°C, which indicates a decrease of 5°C.

7. To calculate the energy needed to heat 35g of gold from 10 to 50°C, you need to use the formula:

Energy = mass × specific heat × change in temperature

The specific heat of gold is 0.129 J/(g·°C). First, find the change in temperature:

Change in temperature = Final temperature - Initial temperature
Change in temperature = 50°C - 10°C
Change in temperature = 40°C

Now, plug in the values into the formula:

Energy = (35g) × (0.129 J/(g·°C)) × (40°C)

Energy = 180.6 J

The energy needed is 180.6 Joules.

For more about energy:

https://brainly.com/question/1932868

#SPJ11

The rationale for Galileo using an inclined plane was that along an inclined plane, only part of gravity acts on the object in its direction of motion. Option 1 is correct.

Galileo's use of an inclined plane was an important contribution to the study of physics, as it allowed for the accurate measurement of the acceleration due to gravity. Prior to this, there was little understanding of the laws governing the motion of objects, and many misconceptions existed.

By carefully measuring the motion of falling objects along an inclined plane, Galileo was able to demonstrate that the acceleration due to gravity was constant, regardless of the weight or shape of the object. This was a major breakthrough in the understanding of physics and laid the foundation for further study in this field. Option 1 is correct.

To know more about the Galileo, here

https://brainly.com/question/9724017

#SPJ4

The net force on q2 is -112.5 N, directed towards q3.

To find the net force on q2, we need to first find the forces exerted on it by q1 and q3 using Coulomb's Law:

The force exerted by q1 on q2 is given by:

[tex]F1 = (k * q1 * q2) / d1^2[/tex]

where k is Coulomb's constant ([tex]9 * 10^9 N m^2 / C^2[/tex]), d1 is the distance between q1 and q2 (0.5 m).

Plugging in the values:

F1 = [tex](9 * 10^9 N m^2 / C^2)[/tex] * [tex](-5.00 * 10^{-6 }C)[/tex] * ([tex]2.50 * 10^{-6} C[/tex]) / [tex](0.5 m)^2[/tex]

F1 = -22.5 N (repulsive, as q1 and q2 have opposite signs)

The force exerted by q3 on q2 is given by:

[tex]F3 = (k * q3 * q2) / d3^2[/tex]

where d3 is the distance between q2 and q3 (0.25 m).

Plugging in the values:

F3 = [tex](9 *10^9 N m^2 / C^2)[/tex] *[tex](-2.50 * 10^{-6} C)[/tex] * [tex](2.50 * 10^{-6} C)[/tex] / [tex](0.25 m)^2[/tex]

F3 = -90 N (attractive, as q2 and q3 have the same sign)

To find the net force, we need to add these forces vectorially, since they act in opposite directions:

Fnet = F1 + F3

Fnet = -22.5 N - 90 N

Fnet = -112.5 N

To know more about Coulomb's Law refer here

https://brainly.com/question/506926#

#SPJ11

The rest energy of a silver atom can be calculated using Einstein's famous equation, E=[tex]mc^{2}[/tex], where E is the energy, m is the mass and c is the speed of light.

Rest energy of a silver atom (E) = mass of silver atom (m) x speed of light [tex](c)^{2}[/tex]

= 1.8 x [tex]10^{-25}[/tex] kg x (3 x [tex]10^{8}[/tex] [tex]m/s)^{2}[/tex]

= 1.62 x [tex]10^{8}[/tex] J

This means that even when the silver atom is at rest, it has an enormous amount of energy stored in its mass due to its mass-energy equivalence.

This concept is important in understanding nuclear reactions, where a small amount of mass is converted into energy through the process of nuclear fission or fusion.

To know more about Einstein, refer here:

https://brainly.com/question/31320432#

#SPJ11

The rate at which the distance from the plane to the station is increasing is 255(sqrt(3)) mi/h when the plane is 2 mi away from the station.

To solve this problem, we will use the Pythagorean theorem and related rates.

Let x be the horizontal distance from the radar station to the plane, y be the altitude of the plane, and z be the distance between the plane and the radar station. We are given that y = 1 mi and the speed of the plane is 510 mi/h. We want to find the rate at which z is increasing when z = 2 mi.

The Pythagorean theorem states that x^2 + y^2 = z^2. Differentiating both sides with respect to time t, we get:

2x(dx/dt) + 2y(dy/dt) = 2z(dz/dt)

Since the plane is flying horizontally and maintains a constant altitude, dy/dt = 0. We're given that dx/dt = 510 mi/h. Now, we need to find x when z = 2 mi. Using the Pythagorean theorem, we have:

x^2 + 1^2 = 2^2
x^2 = 3
x = sqrt(3)

Now, we can plug in the values for x, dx/dt, y, and z into the differentiated equation:

2(sqrt(3))(510) + 2(1)(0) = 2(2)(dz/dt)

Solving for dz/dt:

1020(sqrt(3)) = 4(dz/dt)
dz/dt = 255(sqrt(3)) mi/h

Thus, the rate at which the distance from the plane to the station is increasing is 255(sqrt(3)) mi/h when the plane is 2 mi away from the station.

To learn more about altitude, refer below:

https://brainly.com/question/4390102

#SPJ11

In order to determine a star's luminosity, we need to measure its apparent brightness and distance. Option C is correct.

Apparent brightness refers to the amount of light that we observe from a star here on Earth, and it is affected by both the star's luminosity and its distance from us. Therefore, in order to determine a star's luminosity, we need to know its distance from us so that we can correct for the effects of distance on the apparent brightness.

Once we know the star's apparent brightness and distance, we can use the inverse square law of light to calculate the star's luminosity. The inverse square law states that the apparent brightness of an object is inversely proportional to the square of its distance from us. By knowing the distance and apparent brightness of a star, we can calculate its luminosity, which is a measure of the total amount of energy that the star is emitting per unit time. Option C is correct.

To know more about the Luminosity, here

https://brainly.com/question/31102332

#SPJ4

There are three main criteria that determine if a naturally occurring object is "magnetic"

1. The object must be ferromagnetic (usually iron, nickel, or cobalt), meaning it contains atoms with unpaired electrons that can align themselves with an external magnetic field.

2. The magnetic moments of these atoms must be strong enough to cause the material to be magnetic.

3. The material must have a net magnetic moment, meaning that the magnetic moments of the individual atoms are aligned in the same direction.

While these three criteria are the primary factors that determine whether a naturally occurring object is magnetic, other factors can also influence its magnetism. For example, the temperature and pressure of the material can affect the strength of its magnetic interactions, and the presence of impurities or defects can alter the way its magnetic moments interact.

To know more about magnetic objects, click here;

https://brainly.com/question/26958664

#SPJ11

Answer:False

Explanation:

Tesla was founded in 2003 by American entrepreneurs Martin Eberhard and Marc Tarpenning and was named after Serbian American inventor Nikola Tesla. Therefore it was not made by Nikola Tesla

The electric potential at point A is 1,348.5 V, at point B is 641.5 V

To determine the electric potential at points A, B, and C in Figure 1, we will use the following formula for electric potential (V) due to a point charge (q):

V = k * q / r

where k is the electrostatic constant (approximately 8.99 x 10^9 N m^2/C^2), q is the charge (1.5 nC or 1.5 x 10^-9 C), and r is the distance from the charge to the point of interest.

For point A (r1 = 1.0 cm or 0.01 m):
V_A = (8.99 x 10^9 N m^2/C^2) * (1.5 x 10^-9 C) / (0.01 m)
V_A = 1.3485 x 10^3 V

For point B (r2 = 2.1 cm or 0.021 m):
V_B = (8.99 x 10^9 N m^2/C^2) * (1.5 x 10^-9 C) / (0.021 m)
V_B = 641.5 V

For point C, we need to know the distance from the charge to point C. If it's not provided, we cannot calculate the electric potential at point C.

In summary, the electric potential at point A is 1,348.5 V, at point B is 641.5 V, and we cannot calculate the electric potential at point C without knowing the distance.

To learn more about distance, refer below:

https://brainly.com/question/15172156

#SPJ11