How did our Sun form? *
A cloud of stellar dust from part of a Nebula collapsed causing hydrogen atoms to
fuse together.
Many smaller stars became fused together by gravity
It broke off from a larger star in the universe.
Two gas giants from another solar system became fused together by gravity.
Answer: A cloud of stellar dust from part of a Nebula collapsed causing hydrogen atoms to fuse together
Explanation:
Question 6.Why does a ball dropped from a certain height not bounce back 1 point
to the same height it was dropped from? *
Answer:
Because the coefficient of restitution is less than 1.
This coefficient is 1 for a perfectly elastic collision.
Some of the energy of the fall is absorbed by the ball so the ball cannot return to its original height.
Also, you have the effects of air resistance and some energy absorption of the the reflecting surface.
There is a bottleneck in producing masses higher than4He, because there are no mass-5or mass-8 stable nuclides. For older stars with high densities and high temperatures (T>100 million K), three alpha particles can form12C. This occurs by two alpha particles firstforming8Be, and then8Be reacting with another alpha particle to form12C before8Be candecay back to two alpha particles.a) Explain why this can only happen in very hot stars and high density.b) Calculate how much energy is given up when three alpha particles form12C.
Answer:
Explanation:
a)
To pass the Coulomb barriers and undergo nuclear fusion, alpha particles must be burned at high temperatures. As a result, the ignition temperature needed for this reaction is 5.4168 × 10¹⁰ K. Helium must be burned at a high temperature and density. As a result, this must occur for hot stars with high densities.
b)
The amount of energy given up can be calculated as follows:
[tex]_2He^4 + _2He^4 \to _4Be^8 ---- (1) \\ \\ _4Be^8 + 2_He^4 \to _6C^{12} ---(2)[/tex]
where;
[tex]M(_2He^4) = 4.002603 \ u \\ \\ M(_4Be^8) = 8.005305 10 \ u[/tex]
Therefore, from the reaction (1);
[tex]Q = \Big ( M(_2He^4) + M(_2He^4) - M(_4Be^8) \Big ) ( 931.5 \ MeV) \\ \\ = \Big ( 2(4.002603 \ u) - (8.00530510 \ u) \Big) \Big ( 931.5 \ MeV/u \Big) \ \\ \mathbf{= -0.092 \ MeV}[/tex]
From the second reaction:
[tex]Q = \Big ( M(_4Be^8) + M(_2He^4) - M(_6C^{12}) \Big ) ( 931.5 \ MeV) \\ \\ = \Big ( 8.00530510 \ u +4.002603 \ u -12 \ u \Big) \Big ( 931.5 \ MeV/u \Big) \ \\ \mathbf{= 7.37 \ MeV}[/tex]
1.A body of mass 10kg falling freely was found to be falling at a rat of 20m/s what force will stop the body in 2second?
Answer:
50N
Explanation:
force it is falling with can be found by mass into acceleration and then devide by half to find force that could stop it in 2 sec
A woman has one damaged fallopian tube. The damage completely blocks the opening of the tube at the ovary. How will this most likely affect her fertility?
Her likelihood of conceiving will be reduced by at least 50%.
Her eggs, if fertilized, will not implant properly.
Her eggs will not mature inside the ovary.
Her chances of conceiving twins will be doubled.
Answer:Her likelihood of conceiving will be reduced by at least 50%.
Explanation:
EDGE 2020
Answer:
Her likelihood of conceiving will be reduced by at least 50%
Explanation:
took the test on edge, got it right
Two electrostatic point charges of +62.0 µC
and +43.0 µC exert a repulsive force on each
other of 189 N.
What is the distance between the two
charges? The value of the Coulomb constant
is 8.98755 × 109 N · m2
/C
2
.
Answer in units of m.
3. An airplane is flying at 10 km altitude in the standard atmosphere. The internal pressure of the aircraft interior is 100 kPa. Estimate the outward force on the window. The window is flat and has an elliptical shape with lengths of 300 mm along the major axis and 200 mm along the minor axis.
Answer:
The correct response will be "13.755 kN".
Explanation:
According to the question,
The given values are:
a = 300 mm
i.e.,
= 0.3 cm
b = 200 mm
i.e.,
= 0.2 dm
Internal pressure,
[tex]P_{in}=100[/tex]
Now,
The area of the elliptical shape window will be:
⇒ [tex]A = \pi ab[/tex]
On substituting the values, we get
⇒ [tex]=3.14\times 0.300\times 0.200[/tex]
⇒ [tex]=0.1885 \ m^2[/tex]
By using the table,
At 10 km, the atmospheric pressure will be
⇒ [tex]p_o=27.03 \ kPa[/tex]
Now,
The outward force will be:
⇒ [tex]F_{net}=p_{in}A-p_{0}A[/tex]
⇒ [tex]=(p_{in}-p_{0})A[/tex]
⇒ [tex]=(100-27.03)\times (0.1885)[/tex]
⇒ [tex]=13.755 \ kN[/tex]
How does Newton’s first second and third laws apply to eating your breakfast
Answer:
Newton's third law states that for every action (force) in nature there is an equal and opposite reaction. In other words, if object A exerts a force on object B, then object B also exerts an equal and opposite force on object A. Notice that the forces are exerted on different objects. However much you push your fork in the food, that much a dent it will cause.
Explanation:
Answer:
¡I hope it helps you! :) .................
Which of the following would not create an inclusion fossil?
A. Insufficient oxygen-(when an organism becomes trapped in amber)
B. Low temperatures-(when an organism becomes frozen in a glacier)
C. Extremely high temperatures-(when an organism is burned in fire)
Why is no image formed when an object is at the focal point of a converging lens?
Answer:
the refracted rays neither converge nor diverge. After refracting, the light rays are traveling parallel to each other and cannot produce an image.
Explanation:
A bicycle pump contains 200 cm3 of air and is connected to a bicycle tyre. The volume of the tyre is 800 cm3. The pressure of the air in the tyre (it is ‘flat’) is 1.0 atmosphere, the same as the air in the pump. (= volume1). What is the total volume of the air initially?
Answer:
The total initial volume of air in the tire is 800 cm³
Explanation:
Given;
volume of air in the bicycle pump, V₁ = 200 cm³
volume of the tire, V₂ = 800 cm³
The total initial volume of air in the tire is 800 cm³ and when the pump is pushed in, the total volume of air in the tire becomes 200 cm³. This occurs because the new air pumped into the tire through the bicycle pump compresses the air that was previously in the tire and raises the pressure of the tire that was initially flat.
From Boyle's law, a decrease in volume causes an increase in pressure.
In which region is there most likely to be a volcano?
A, African plate
B, north american plate
C, south America plate,
D, Pacific plate
Answer:
D. Pacific plate
Explanation:
took the quiz
A container in the shape of a cube 11.6 cm on each edge contains air (with equivalent molar mass 28.9 g/mol) at atmospheric pressure and temperature 291 K. (a) Find the mass of the gas. kg (b) Find the gravitational force exerted on it. mN (c) Find the force it exerts on each face of the cube. kN (d) Why does such a small sample exert such a great force
Answer:
a. 0.00189 kg
b. 18.552 mN
c. 1.363 kN
d. Since the molecular density is high, the force exerted by the sample is thus high.
Explanation:
(a) Find the mass of the gas. kg
Using PV = mRT/M where P = pressure on gas = atmospheric pressure = 1.013 × 10⁵ Pa, V = volume of gas = L³ where L = length of cube = 11.6 cm = 0.116 cm,m = mas of gas, R = molar gas constant = 8.314 J/mol-K, T = temperature of gas = 291 K and M = molar mass of gas = 28.9 g/mol
So, m = PVM/RT = PL³M/RT
Substituting the values of the variables into the equation, we have
m = PL³M/RT
= 1.013 × 10⁵ Pa × (0.116)³ × 28.9 g/mol/ 8.314 J/mol-K × 291 K
= 0.0457 × 10⁵ Pa g/mol/2419.374J/mol
= 1.89 × 10⁻⁵ × 10⁵ g
= 1.89 g
= 1.89 × 10⁻³kg
= 0.00189 kg
(b) Find the gravitational force exerted on it. mN
The gravitational force, F exerted on it is its weight W
So, F = W = mg where m = mass of gas = 1.89 × 10⁻³ kg and g = acceleration due to gravity = 9.8 m/s²
F = mg
= 1.89 × 10⁻³ kg × 9.8 m/s²
= 18.522 × 10⁻³ kgm/s²
= 18.552 × 10⁻³ N
= 18.552 mN
(c) Find the force it exerts on each face of the cube. kN
Since pressure, P = F/A where F = force exerted on each face and A = area of each face = L² where L = length of side of cube = 11.6 cm = 0.116 m
So, F = PA since P = atmospheric pressure = 1.013 × 10⁵ Pa,
F = PL²
= 1.013 × 10⁵ Pa (0.116 m)²
= 0.01363 × 10⁵ N
= 1.363 × 10³ N
= 1.363 kN
(d) Why does such a small sample exert such a great force
To answer this question, we need to find the density of the gas in the cube.
So density of gas,ρ = m/V where m = mass of gas = 1.89 g and V = volume of gas = L³ and L = length of side of cube = 11.6 cm
ρ = m/V = m/L³ = 1.89 g/(11.6 cm)³ = 1.89 g/1560.896 cm³ = 0.00121 g/cm³
We now find the number of moles of gas in a cm³ by dividing its density by its molar mass.
So n = ρ/M = 0.00121 g/cm³ ÷ 28.9 g/mol = 23687.67 mol/cm³
Since there are 6.022 × 10²³/mol, we find the number of molecules in a cm³ which is n × 6.022 × 10²³/mol = 23687.67 mol/cm³ × 6.022 × 10²³/mol
= 143731.1 × 10²³ molecules/cm³
= 1.437311 × 10²⁸ molecules/cm³
≅ 1.44 × 10²⁸ molecules/cm³
Since the molecular density is high, the force exerted by the sample is thus high.
The universe could be considered an isolated system because (2 points)
A: many people think that no energy or matter exists outside the universe
B: energy and matter are created in the universe and flow freely into and out of the universe
C: energy is created outside the universe and matter is created within the universe
D: energy is created in the universe and matter is transferred out of the universe
if a fly gets his wings cut of, is it still a fly?
Answer:
Yes I think... But the joke is it is a walk then.
Answer:
no
Explanation:
because if the fly get its wings cut off its obviously not going to be able to fly
Will give brainliest!!
How much KClO3 is needed to make a saturated solution in 100 mL of water at 70⁰ C?
Answer:
iam not sure but I think its NaNO3
Newton's first law of motion states that an object's motion will not change unless
Answer:
unless an external unbalanced force acts on it.
Answer:
An object in motion will not change unless an external force acted upon it.
A piano tuner detects 3 beats per second when she is tuning a string to a tuning fork of frequency 440 Hz. When she tightens the string, which increases the frequency of the string, the frequency of the beats initially goes down, and as she keeps increasing the frequency of the string, the frequency of the beats starts to increase. What was the original frequency of the string
Answer:
[tex]F_o=437Hz[/tex]
Explanation:
From the question we are told that:
Frequency of Turning fork [tex]F_t=440Hz[/tex]
Number of beats detected [tex]n=3[/tex]
Generally the equation for Original frequency [tex]F_o[/tex] of the string is mathematically given by
[tex]F_o=F_t-F_b[/tex]
Where
[tex]F_b[/tex] Beat frequency
[tex]F_b=1Hz*n\\F_b=1Hz*3[/tex]
Therefore
[tex]F_o=440-3[/tex]
[tex]F_o=437Hz[/tex]
Samir wants to be a doctor like both of his parents when he gets older he never thought of doing anything else which of the following best explains Samir decision ?
Calculate the speed of an object that travels 75m in 15s
Answer:
speed =distance/time taken
5 m/s
what is a black hole what does it do
Answer:
What's a black hole?=> Black holes are points in space that are so dense they create deep gravity sinks. Beyond a certain region, not even light can escape the powerful tug of a black hole's gravity.
What does it do?=> Anything that ventures too close—be it star, planet, or spacecraft—will be stretched and compressed like putty in a theoretical process aptly known as spaghettification.
[tex] \infty \infty [/tex]
What is the female counterpart of sperm?
the vagina
the ovum
the zygote
the epididymus
Answer:
The zygote
Explanation:
The sperm is what fertilized the egg and the zygote is basically part of the female egg cell.
Hope this Helps!Hope this Helps!:)Answer:
the answer is the ovum on edge
Explanation:
what is molecular force and gravitational force with their examples .
Answer:
Gravitational force is the force of attraction on a body by earth. Example - Leaves and fruits fall from a tree downwards towards the ground due to the gravitational pull. ... T-shirt for is basically the force Of attraction On a body And this force of attraction on the body is by Earth.
Intermolecular forces act between molecules. ... Intermolecular forces are weaker than intramolecular forces. Examples of intermolecular forces include the London dispersion force, dipole-dipole interaction, ion-dipole interaction, and van der Waals forces.
Explanation:
Explanation:
I am sure you are Clear. Thanks.
Which direction do longitudinal waves travel?
Answer:
If the particles of the medium vibrate in a direction parallel to the direction of propagation of the wave, it is called a longitudinal wave. In longitudinal waves, the particle movement is parallel to the direction of wave propagation.
Explanation:
My MASS on Earth (g = 9.81 m/s^2) is 90kg. What is my MASS on the moon
(g = 1.62 m/s^2)? *
Why do you think geologists were able to use these P and S seismic waves to confirm that the outer core is liquid?
Using waves of frequency and pich
Explanation:
There's always been water around us
Which of these is an example of tertiary prevention?
A. Getting screened for skin cancer
B. Avoiding smoking and drinking alcohol
C. Dialysis for damaged kidneys
D. Washing hands
Explanation:
because a tertiary prevention is when the person is already infected with the disease
Fizik
Dua perintang 5 Ω dan 10 Ω disambung selari dengan 9 V bekalan kuasa. Kira kuasa output bekalan kuasa.
Answer:
P = 24.32 W
Explanation:
The question is, "Two resistors 5 Ω and 10 Ω are connected in parallel with a 9 V power supply. Calculate the output power of the power supply.".
The voltage of the power supply, V = 9 V
Resistor 1, R₁ = 5 Ω
R₂ = 10 Ω
The equivalent of parallel combination of resistors is given by :
[tex]\dfrac{1}{R_{eq}}=\dfrac{1}{R_1}+\dfrac{1}{R_2}\\\\\dfrac{1}{R_{eq}}=\dfrac{1}{5}+\dfrac{1}{10}\\\\R_{eq}=3.33\ \Omega[/tex]
The power of the output is given by :
[tex]P=\dfrac{V^2}{R_{eq}}\\\\=\dfrac{9^2}{3.33}\\\\P=24.32\ W[/tex]
So, the output power is equal to 24.32 W.
Set three resistances to 2, 3, and 5 Ohms in series, and determine the current in the circuit with an ammeter. Take the snapshot of the screen showing the circuits and the reading of the ammeter. Then, replace these three resistors with just one resistance of 10 Ohm. Determine the current running in the circuit. Take a snapshot showing the circuits and the reading of the ammeter. Is the current the same as in the previous experiment with the three resistors
Answer:
the current in the circuit must be the same.
Explanation:
The equivalent resistance in a series circuit is the sum of the resistances
in this case
R_{eq} = R₁ + R₂ + R₃
we calculate
R_{eq} = 2 + 3 + 5
R_{eq} = 10 Ω
We can see that the equivalent resistance is equal to the resistance to be changed, so the current in the circuit must be the same.
The only change there may be is due to the tolerances of the resistors
If I have an object with a 6.0 µC charge , and another with a -2.0 µC charge, when they touch how do I find the new charges
When charged objects touch, you can assume that the charges move between the objects, so that the total amount of charge doesn't change but it splits equally between the two objects.
-- like two water tanks standing next to each other, with a different amount of water in each one. When you connect a pipe between their bottoms, some water flows across until the LEVEL of water is the same in both tanks.
-- like one hard full balloon and one soft mooshy balloon. When you connect them together, some air flows from the hard balloon into the soft balloon, until the pressure of air is the same in both balloons.
The total amount of charge on your two objects is (+6.0 μC - 2.0 μC). That's +4.0 μC .
When they touch, charges move around until the charge is the same on both objects . . . +2 μC.